SystemVerilog allows a variable to be used as a variable OR
as an unresolved wire. The detection of this case was checking
the references to the affected value, instead of the l-value
references.
(cherry picked from commit cceeaa30f27260cd444015cb39b04353cb858768)
The final step of expression elaboration is to reduce the width of
lossless/unsized constant expressions to the minimum needed to hold
the resulting constant value. This leads to unexpected results if
the user supplies a literal number with redundant digits that gets
passed to a system task that is sensitive to the width (e.g. $display).
This patch prevents width reduction occurring in this case.
When a conditional statement is unnamed, it doesn't create a scope
and we get into "direct" generate scheme elaboration. This direct
elaboration needs to handle case generate schemes.
The IEEE standard does not specify the behaviour of a tranif primitive
when its control input is an 'x' or 'z'. vvp currently treats these as
if the tran was turned off, but it would be better to propagate the
uncertainty to the tran bi-directional ports. For compatibility with
other simulators, we adopt the behaviour specified for MOS primitives.
This is a cleanup in preparation for better support of range lists.
(cherry picked from commit 8f7cf3255acad55841f8b3725e3786ef49daad68)
Conflicts:
PTask.h
elab_scope.cc
elab_sig.cc
parse.y
pform.cc
pform.h
pform_types.h
Signed-off-by: Stephen Williams <[email protected]>
The SystemVerilog unbased literals (e.g. '0, '1, etc.) are expected to be
used standalone and cannot take a size. This patch modifies the parsing
code to give a good error message when this is done.
The standard specifies that the size of a vecval should be calculated as
(size - 1)/32 + 1. When size is a PLI_INT32 this is needed to prevent an
overflow, but when the size is unsigned this can be simplified to
(size + 31)/32 since the size must fit into an integer, but we have an
extra significant bit in an unsigned so no overflow can happen.
This patch changes the code to use the correct version of the equation
depending on the context.
The previous patch does this in vvp/vpi_priv.cc
When vpi_put_value() is asked to delay the assignment any pointer data
needs to be duplicated so that the caller can clean up the locally
allocated memory without causing memory access problems.
Also update word calculation to match the next patch.
If a tranif gate has a delay, the vvp code generator needs to generate
a unique label for the island port used for the tranif enable, to
prevent a name collision if the undelayed signal is also connected
to the island.
Also add an assertion in vvp to catch bugs like this.
Class methods belong in a class scope, not the containing module.
So create a lexical scope that carries tasks and functions and
create a PClass to represent classes.
Tasks call arguments may be dropped in favor of default values.
Allow for that in the syntax. This requires a little handling
of the non-SystemVerilog case during elaboration.
Class names can be declared early, before definitions, so that the
name can be used as a type name. This thus allows class definitions
to be separate from the declaration. This creates some complexity in
the parser, since the lexor knows about the class names.
This adds the vector_type_t and real_type_t types to handle
vector and real types in tf_port items. This cleans up a lot
of the parsing for these items.
During parse/pform processing, convert increment statements to
the equivalent compressed assignment statement. This is less weird
for elaboration processing and better expresses what is going on.
The clang compiler does not like using struct to reference a class object.
This patch removes all the struct keywords for __vpiNamedEvent objects
since they are now a class and can be called without a struct/class
qualifier.
This patch also removes all the extra class qualifiers from the rest of
the source code.
This handles a few cases where the non-constant bit selects are
in the final index. This doesn't handle all the cases of packed
arrays, but it handles some common cases.
This gets me to the point where the parser stashes a defined type,
and the lexical analyzer uses the type names to differentiate
IDENTIFIER and TYPE_IDENTIFIER.
Parse typedefs with structs and enums, but give a sorry message,
because they are not yet supported. Rearrange some of the parse
rules for variables in order to increase comonality with the
typedef rules.
When looking for a value change on a part select of an array word,
the callback handle has to save the current value and test it with
the new value to see if there is an actual change. If not, then
suppress the callback.
The clang compiler does not like mixing class and struct references. This
patch updates all the struct __vpiHandle, etc. to use class since that is
how they are now defined.
All the methods that this structure supported are now pulled
into the __vpiHandle class as virtual methods. This includes
the vpi_free_object_ method, which required some extra trickery.
Instead of C-like data structures where the __vpiHandle base is a
leading member, make the __vpiHandle a derived class. Give the base
class a virtual destructor so that dynamic_cast works reliably, and
now pretty much all of the junk for testing if an object really is
of the derived class goes away. Also, problems with casting up to
a vpiHandle become trivial non-issues.
Full vector assigns are able to short circuit the propagation of
the value if it finds that there are no value changes. This patch
supports that behavior in writes to parts as well. Put this change
to use in logic devices as well.
Not all the lex/yacc (flex/bison) targets were using a consistent syntax.
This patch fixes that and explicitly serializes the *.c/*.cc and *.h build.
Not doing this was causing problem when using make -j. The issue appears to
be that if two targets are specified for a rule (e.g. file.cc file.h: file.y)
make does not realize they are both built by the same call so the rule is
executed twice. Once for the .cc target and once for the .h target. This is
not a problem for a serial build. To work around this only use the .c/.cc
file in the main target and then make the .h file depend on the .c/.cc file
as a sub-target.
Rework the nexus emitting code to correctly translate most I/O ports.
Fix a few other expression issues uncovered when port translation was
done correctly. Ignore and warn that the SV ++/-- operators and enum
types are not translatable. More updates of the nexus debug code.
On some systems having both %.o: %.c and %.o: %.cc rules confused the
make system. This is directory only has C++ code so remove the %o: %.c
rule. Also the C++ compiler should be used to link C++ object code.
On Ubunto 10.10 (32 bit) tgt-pcb would not build because there were
include file issues. This patch fixes those and uses the C++ include
version where appropriate.
The main .pcb file contains elements, and basic PCB status.
Write out a .pcb file with stub Elements for each of the devices
in the design.
Rearrange the way the files are reported to the code generator
so that we can sensibly express where the output files are.
This is a pretty trivial fix for the code generation of compressed
assign to a memory word. We generated incorect code for the stash
of the calculated word index, causing the assign of the result to
not work properly.
This same change was done in the vpi directory. This patch fixes the
issues in the libveriuser directory. This fixed a fail in the vpi
timescale test under MinGW.
A declaration of the form "parameter signed a = 1.0" causes a
compiler crash. The standard is somewhat contradictory on what
type "a" should have, but testing with other compilers shows a
majority in favour of it being a real value.
The standard allows a parameter (or localparam) declaration of the
form "parameter signed my_param = ...". The parser currently rejects
this. A small adjustment is also required in the parameter evaluation
code to correctly apply the type.
Now we have a code generator that can handle compressed assignments
as they have been re-imagined in elaboration. There are some cases
that are not yet supported, we'll patch them up in due course.
Most people doing real modeling don't want to bring in the whole
Verilog-AMS infrastructure to use wreal nets. This patch adds the
wreal keyword to the xtypes generation so that wreal is available
by default.
This patch adds wreal support when in Verilog-AMS mode. It doesn't add
everything that is shown in the Verilog-A standard.
It adds the following:
Declaring a wreal net.
Declaring a wreal net with an initialization.
Declaring a wreal input/output using ANSI syntax.
Declaring a wreal input/output using the old style.
Declaring wreal inout ports are also allowed and parsed, but the
compiler does not know how to handle this. There are other deviations
from what is shown in the Verilog-A standard, but this should get most
of the syntax people actually use.
An @* with no sensitivities should be treated as something that will
never trigger vs something that will run continuously. This patch makes
this change and adds a warning when an @* has no sensitivities since
this is almost certainly a coding bug.
It is legal for a named block to contain variable definitions and
no statements. This patch fixes this for both style of blocks. It
also organizes the block parsing code to be a bit more clear, adds
an error case for fork/join and changes on check for size() > 0 for
the more efficient ! empty().
To avoid a variables not initialized in the construct this patch modifies
the PSpecPath class to take the polarity and full_flag as arguments to
the constructor.
The --always flag to git describe is harmless in the normal case,
and helpful in some special cases. Also add the --dirty flag to
get extra interesting details.
If a wired and/or net has more than four connections all the other
resolution branches must also be wired and/or. All other nets can
just be tri since tri0/tri1 only needs the final resolution to be
an active pull up/down.
Since synthesis is not currently supported we do not support/generate
sync/async set or clear control inputs. This is further complicated by
the fact that the VVP DFF primitive is not fully implemented.
This patch fixes a compile problem in Cygwin where there are two
definitions for abs() that do not match so the C++ code doesn't know
which one to call. To avoid the whole mess replace the call to abs()
with the appropriate ?: construct.
In a specify block a full connection is defined to only support a single
source and destination path. This patch adds an error message when this
is found, except we skip the error if all the paths are a single bit
wide. This exemption was added to match the functionality found in
NC-Verilog and presumably Verilog-XL.
A message was also added in place of an assert if the source signals was
not found in the current scope.
Both UDPs and system functions use the wide input functor. This patch
modified the code generator to create a local net declaration for the
output net if we have either a delay or modpath connecting the output
to the true output. This is needed so that the wide input can be
cleaned up correctly.
Local real nets were also added to the local net pool when testing with
valgrind. This allows them to be cleaned up at the end.
For a delay we do not know exactly what type we will be propagating
until the initialization event has happened. Because of this we
allocate both a vec4 and a vec8 value. Once the initialization event
has happened we can free the unneeded element(s).
This patch uses the full_flag to verify that the input and output have the
same width for a parallel connection. Icarus always uses a full connection
so this is just a portability issue with other simulators.
The pform dump code was also modified to correctly display the polarity
and full/parallel connection type.
In MinGW, when parameters are passed to vhdlpp by ivlpp, single quotes
are treated as ordinary characters. Use double quotes instead, as is
done in the driver.
Also, MinGW does not have a standard mkdir() function, so we need to
convert calls to mkdir() into calls to _mkdir().
When scaling a time value we would often use the power operator to
create constants 10**-N that were then multiplied with the original
value. The problem with this is that there is some errors in the
representation of the fractional number. It is better to create a
integer value 10**N and then divide the original value by this
exact constant. You still have the calculation error, but the scale
value is now an exactly real value.
Add support for %m, suppression '*' and a maximum field width along with
a number of other fixes/enhancements. There is still no support for
%u, %v or %z.
The fix to get a C99 compliant strtod() in MinGW mistakenly set the
LDFLAGS value rather than appending to it. This meant that a LDFLAGS
supplied by the user on the configure command line would be ignored.
MinGW has reverted to using the Microsoft msvcrt0 implementation
of the strtod() function. This implementation doesn't accept "INF"
"NaN". MinGW does provide a C99 compliant implementation of this
function called __strtod(). We need to force the linker to replace
all references to strtod() with references to __strtod().
This patch adds error messages that forcing a word to/from a variable
array is not currently supported. This is because variable arrays no
longer are fully populated and don't have an access functor for each
word. Forcing a word from/to a net array does work as expected since
each word in a net array is created.
Technically forcing a variable array word is not supported in 1364-2005.
Reading from an array word, which is supported, will be fixed in
development once the expression rework is finished.
The error message printed when forcing a bit/part select l-value was
also improved.
Promote the unsigned values to long to get a good comparison and on a
machine where an unsigned is the same size as a long (32 bit) assert
that the unsigned values are constrained to fit into a long. It's unlikely
the values needed to create invalid results would ever happen, but this
patch makes sure it doesn't go undetected.
Some of the last changes I added to the enumeration next()/prev() code
introduced a memory leak under some situations. This patch fixes the
leak by freeing the iterator before the new one is created.
The name is not currently used, but when it is it makes sense for it to
be in the base class. Also the name cannot be deleted after compiling
since it may be used later.
The VPI object data model diagrams show a one to many relationship
between the "mod path" and "path term" objects. This means that the
correct way to obtain handles to "path term" objects is to use the
vpi_iterate and vpi_scan functions.
Support for the old method of obtaining handles to "path term" objects
using the vpi_handle function is retained for backwards compatibility.
Entity generics are easily implemented as module parameters, so make
it so. Give the parameters their default values from the generic declaration.
Array bounds may use values that cannot be evaluated right away, so
put off their evaluation.
Add an implementation for the enumeration name() method. This currently
only works if the context defines the return width (e.g. the result is
assigned to a variable). It does not work in a self-determined context
(e.g. as an argument to a system function or in a comparison). This is
a limitation in the compiler/code generator/run time not the method
implementation provided here. We may need full string support to make
this work 100%.
The standard defines how to calculate the name for an access function
or iterator if one is not given. It is supposed to be vpi followed by
the words in the name with each word capitalized. For the one to many
(iterator) interface from the enumeration typespec to the individual
constants this is vpiEnumConst not vpiMember.
Rework the actual next() and prev() methods to correctly process the
numeric count argument. Also rework the compiletf routine to give better
error messages and combine the call routine for the two methods.
Add a compiletf routine that checks the arguments and then report that
the name() method is not currently implemented.
We don't currently have the information needed to correctly provide the
base typespec, but in the next() and prev() methods I need to know if
the enumeration is two or four state. This patch sets the base typespec
for four state enumerations to vpiReg and to vpiBitVar for two state
enumerations. This provide enough information to get next() and prev()
working correctly.
This patch adds vpiEnumTypespec to the list so that vpi_get_str(vpiType, ...)
returns an appropriate string when an enum type is passed.
It also adds the initial hook to allow iteration (global) over the UDP
definitions. This along with table traversal will be needed to free the
memory allocated when the UDP definition is created. Ultimately this
will all the UDP test to be valgrind clean.
The PLI tf_getlongsimtime() function is a non-standard function provided
for compatibility with some commercial simulators. To match the behaviour
of those simulators, it should return the raw simulation time, not a
scaled time.
The vpiDecStrVal case for the get_numeric() function needs to use the
existing string width as the minimum result size. -1 can be represented as
a signed value with a width of 1. This gives a display width of -1 which
is too small for the -1 string value. This was creating valgrind issues.
In general the string value should be the minimum so this is a safe change.
If a constant is padded the original constant will be freed and replaced
with a new one. This results in the ce pointer pointing to freed memory.
In reality the second check only needs to be done if the first one is
false so avoid the whole issue by only performing the second check if
the first on is false.
If a wait statement has a constant argument then the mode must be defined
before test_width() is called since the current mode is used in the
PENumber test_width routine.
Add code to allow an enumeration method to be called as a function.
This is only the compiler support. The runtime support is still missing
so only an empty argument call will succeed (e.g. next(), etc.). For now
the rest get a warning message.
Update the line number for a couple cppcheck suppressions and add one for
the pool variable in the vvp directory.
Also move a check for null to the correct place.
This patch makes the code consistently use struct/class in the C++ files,
it removes a couple shadow warnings and where a class pointer is passed to
the C routines, it defines the pointer as a class for C++ and as struct for
C and it removes a namespace std duplication.
This patch updates the $scanf and $printtimescale routines to work with
two-state variables. It also updates the general is_numeric check to
recognize two-state variables as numeric.
Modify the $random code to allow the seed to be either an int, long or
bit that is 32 bits or longer. The 32 bit check is new and also applies
to reg/logic variables.
This patch fixes a few more bugs in the enumeration code.
It add support for saving the file and line information to make
diagnostic messages better.
It updates some of the compiler warning messages to use the file
and line information.
It passes if the enumeration type is signed all the way to the
code generators.
It fixes the parser to correctly have the range after the signed
designation for the vector types.
It adds a warning that vvp does not currently support a negative
two state enumeration value.
We need to print a message and fail if the two \\ characters are not found
in the executable path.
Also update the generation warning to include -g2005-sv.
This is caused by a bug in some simple pattern matching the VHDL target does to try
and produce more idiomatic code in common cases (e.g. FFs with asynchronous resets in
this case). This patch just restricts the kinds of if-statements we use this
optimisation for.
The patch adds necessary error checking to verify that the operands of
increment decrement operator is not number.
Signed-off-by: Prasad Joshi <[email protected]>
Type cast expressions and some function calls are syntactically
identical to array element select, so we can only tell the difference
by looking up the name of the identifier being selected. If it is a
type name, then create an ExpCast instead of an ExpName object.
Also, parse and emit vector part selects.
Add a new IVL_PR_FINAL process type.
Add a flag to NetScope in_final_ which is set when elaborating the
statement of a final procedure.
Add checks during statement elaboration for invalid statements in a
final procedure, similar to checks for statements in functions.
Do a final check to make sure no final blocks have delays.
In the vvp runtime, use "$final" as the flag for the thread created by
the final procedure. During compilation, instead of adding such a
thread to the sched_list, add it to a new schedule_final_list that
mirrors the schedule_init_list, but is run at the end of simulation.
This patch adds support for increment/decrement operators as an
expression. The operations on real and vector slices have been
disabled for now.
These operators can be used as in independent statements. However, the
corresponding support is not added in parser.
Changes since V2:
- Additional error checking in elaboration to deny operation on vector
slices and real (suggested by Martin)
Changes since V1:
- Use 'i' and 'I' for increment (suggested by Cary)
- Evaluate sub-expression once (suggested by Cary and Stev)
- Add necessary checks during elaboration to ensure that the
expression is valid (suggested Stev)
- Proper width handling with vectors (suggested by Martin)
Signed-off-by: Prasad Joshi <[email protected]>
Icarus uses 'i' in the net expressions for a cast to integer. Replacing
it with 'v' would free the character 'i' that can be used for increment
operators. This changes cast operators to become 'v', '2', and 'r'.
Signed-off-by: Prasad Joshi <[email protected]>
Suggested-by: Cary R. <[email protected]>
The vvp target code generator may not elide a BUFZ if the output of
the BUFZ is connected to a net that is the subject of a procedural
force statement.
Named libraries are similar to the work library, but they are not
written to implicitly, or imported implicitly. They are only brought
in by a "library" clause, the the packages within the library are
brought in by a "use" clause.
Technically the sized function is not currently needed by Icarus since
the SFT file handles this type of information, but lets define this so
that things work correctly if we ever switch to using the standard VPI
interface. Also mark this as a system defined function.
Presumably, the user will want the ability to explicitly set the
working library location, so create a +vhdl-work+ plusarg setting
for exactly that purpose.
Port map aspects were held in std::maps. Because
of that, in case of multiple assignments to the same
port, some assignments were lost and in effect vhdlpp
produced correct verilog code from a buggy VHDL.
Std::map was replaced by std::multimap. Thanks to it
we can gather this multiple assignments and detect them
in the elaboration phase.
This patch introduces in ScopeBase separate containers
for declarations coming from the current scope and from
the previous scopes.
Until now, in one scope, all objects were kept in an stl map.
When a scope was created inside other scopes, a shallow
copy of the map was made. This solution was nice for
name shadowing (in new scopes, when a name was
encountered, the old objects were overridden by a new
one), but didn't allow for distinguishing where the objects
were allocated. As a result, it is impossible to know who
the owner is and who should delete them.
In this commit ScopeBase gets two containers: for old
and new objects. If a ScopeBase is made from another
ScopeBase object, all objects from the copied object
go to an old_XXX container, where XXX depends on the
type of the copied objects. When a ScopeBase object
is deleted, the objects from new_XXX are deleted and
the ones from old_XXX are not touched.
This patch adds some complexity to the internals
of ScopeBase, but leaves its interface unchanged.
This is rather a cosmetic change. The patch changes
the container used for stack of scopes from std::list
to std::stack. It suits this particular application
a bit better.
Thanks to valgrind analysis it turned out that
there were objects in the parser that were not being
deleted in a proper way. This patch fixes them all.
Instead of using automatic variables for global
types, I allocate them dynamically. Thanks to it,
all type objects can be treated in the same way,
as all of them are pointers allocated with `new'.
Now we will be able to remove all scopes in the same
manner, no matter if it is a global or local scope,
by deleting all carried pointers.
When writing arrays to the work library, handle the special
case that it is an array of std_logic and write a std_logic_vector
declaration instead. This makes for a more compact description.
When a "use" clause tries to pull a package from the work library,
put together a file name and try to find that package in the
work library directory. If found, parse the package file and
try again to find the package.
Bison and Flex generate different interfaces for reentrant
parsers, so handle that different API. We need this change
because library support is going to reuse the parser to
read in library packages.
This patch adds code to check for a negative or undefined value used in
an enumeration sequence name, it verifies that the count in an enumeration
sequence name is not zero and allows more decimal constant values in the
enumeration sequence name..
isprint() is defined to take an int and if it is defined as a macro then
you can get a warning that a char is being used as an array index. This
patch fixes this warning in tgt-vlog95/msic.c
SystemVerilog extended the assignments operator support to C-like
assignment operators and special bitwise assignment operators.
For example:
a += 1;
a -= 1;
The list of these operators can be found in SV LRM (1800-2009)
section 11.4.1.
NOTE: I fixed a few parts of this. In particular, the PEBShift
class is used for shift operators.
Acked-and-Tested-by: Oswaldo Cadenas <[email protected]>
Signed-off-by: Prasad Joshi <[email protected]>
This function is for the time being used in the
component instatiation. It is checked, whether
an expression is a correct r-value.
To be a correct r-value, it must be either
port name or signal name.
pow(int, int) is ambiguous since it could use the double version from
the math library or the verinum version. This patch makes it obvious that
we want to use the double version.
Build up a work library by writing a VHDL representation of the
package header into a source file. This representation needs to
be accurate enough that later invocations of vhdlpp can read them
with the VHDL parser.
A bit/logic output type in a module initially is defaulted to as a
variable. Depending on how they are used in the module, the type
changes accordingly.
For example
module test(output logic l);
assign l = '0;
endmodule
The variable 'l' would be promoted to a Net data type, when the
'assign' statement is encountered.
Acked-by: Oswaldo Cadenas <[email protected]>
Signed-off-by: Prasad Joshi <[email protected]>
The module declaration should allow initialization of the bit and
logic data types.
For example:
$ cat clkgen.sv
module clkgen(output logic clk = 0, output bit p = 1);
initial begin
#200;
$display("p = %b", p);
$finish;
end
initial forever #10 clk = ~clk;
endmodule
$ iverilog -g 2009 clkgen.sv
$ ./a.out
p = 1
Suggested-by: Oswaldo Cadenas <[email protected]>
Signed-off-by: Prasad Joshi <[email protected]>
SystemVerilog allows passing the 'bit' and 'logic' arguments to a
function. The patch adds support for parsing these function
definitions. The 'bit' data type is treated as boolean, whereas 'logic'
data type remains as logic.
Acked-by: Oswaldo Cadenas <[email protected]>
Signed-off-by: Prasad Joshi <[email protected]>
This patch removes the space between -L and the directory in the vpi
Makefile. It also fixes the line to use the correct variable name
for the LDFLAGS.
The patch allows parsing of function definitions which do not have
explicit data type or range. The default return data type is assumed
to be reg unsigned and the default range is 0.
Signed-off-by: Prasad Joshi <[email protected]>
Verilog allows returning variables of 'reg' type. The icarus verilog
implicitly assumes the default returned type of the function as
'reg unsigned'. The patch allows to explicitly specify the 'reg' return
type.
Signed-off-by: Prasad Joshi <[email protected]>
Verilog allows user to define variables of primitive types. The patch
adds support for defining variables of type 'logic'. The data type
'logic' is the only primitive data type which supports defining ranges.
Signed-off-by: Prasad Joshi <[email protected]>
Verilog allows user to define variables of primitive types. The patch
adds support for defining variables of type 'bit'. The data type 'bit'
is the only primitive data type which supports defining ranges.
Signed-off-by: Prasad Joshi <[email protected]>
Remove an unused variable (desired_vector_width) in elaborate.cc.
Reduce the scope of spin to make it obvious it is only used locally
in elaborate.cc. Initialize sel_type_ in the NetAssign_ constructor
(net_assign.cc). The code doesn't currently require this since
sel_type_ is only used when the base is not zero and it is always
defined when base is not zero, but giving this a default value in
the constructor hedges against accidentally using an undefined
value if someone checks the select type when the base is zero.
The $ivlh_attribute_event system function helps the Verilog runtime
support <name>'event expressions in VHDL. The vhdlpp generates a
call to $ivlh_attribute_event, which in turn uses callbacks to handle
the support.
This is also the start of the vhdl_sys vpi module. This module should
by included whenever VHDL code is parsed.
The compiler was handling bi-directional pass switches using the default
case for primitive gates, where the first port is treated as an output
and the remaining ports are treated as inputs. This patch adds a special
case for pass switches, so that the first two ports are treated as
bi-directional.
When a signal (or port) is assigned by a sequential assignment,
the signal or port becomes a reg, instead of a wire(net). Detect
this distinction during elaboration and generate the correct
signal/port declaration.
The -gno-specify flag should only control the delay and timing checks.
It should not also remove the specparams since they can be used outside
of a specify block.
The IEEE standard states that the port expressions used for arrays
of primitive gates must be the exact width required, but is silent
about the requirements for single instances. The consensus among
other simulators is that for input ports of single instances, the
expression is silently truncated to a single bit.
This patch also fixes a compiler crash if an error is found when
elaborating a primitive gate port expression.
Keep the entity/component/module port declarations in the module port
list of the generated code. This clarifies the generated code and
fixes a couple bugs for more complicated types.
R-value expressions are more general then L-value expressions, in that
the expression type may be a bit more complex. If the R-value expression
is part of an assignment, then elaborate with the constrained type from
the L-value. In other cases, where the expression type is not as obvious,
use expression type probes to figure out the type of the expression and
elaborate using that calculated type.
This patch adds code to properly calculate the type and width of a
specparam when it is used in an expression.
This patch also fixes a compiler crash when an unknown identifier is
used in a delay expression.
Icarus is not actually fast enough to run into this issue in a
reasonable amount of time. I discovered this by thinking about
the algorithm and verified the fix with custom code.
If a relative path name is passed to the Windows LoadModule function,
it is applied in turn to each path in the DLL search path. For the
ivl_dlopen function, we actually want to mimic the Unix behaviour,
where a relative path is relative to the current working directory.
On systems where the KB2264107 security fix has been applied, the
CWD is excluded from the DLL search path, so we no longer get the
required behaviour. This patch reworks the ivl_dlopen function to
give the correct behaviour under Windows.
This patch also adds a flush of the stderr stream after reporting
VPI call errors. This fixes a race between the stdout and stderr
streams when running the regression tests in a MinGW shell.
VHDL doesn't have a direct way to express "always @(posedge...)"
statements, but we do want to detect common paradigms that naturally
translate. This makes for a better translation.
Entity output ports may be used as l-values in a process within
the bound architecture. Detect that case during elaboration and
adjust the signal declaration so that it works in the Verilog pass.
Infrastructure for debug and emit of sequential statements in processes.
This does not properly handle the actual semantics of the behavioral
code, but it provides an infrastructure where we can handle all the
tricky elaboration to come.
Get to the point where our sample program parses completely, and
the sequential statements generate SequentialStmt objects and a
process object in the architecture.
Also add a few missing expression types.
The code should be able to correctly parse any command string and
assign the appropriate values from the file to a structure that will
be used to add the information to the table structure.
snprintf() copies at most N characters, but the string may not be
terminated correctly. This patch uses sizeof() so that the snprintf()
call matches the size of the buffer and adds code to insert a NULL as
the last character of the string.
Added an explicit option prefix="yy" to files that were generated
without an explicit -P.
This makes the lex-generated symbol names self contained without any
help from from build system.
The const fixes for lxt_write.c were never pushed to GTKWave so
they were lost in a later sync with GTKWave. These changes have
now been pushed to GTKWave.
If there are attributes attached to a module port declaration them
pform_bind_attribute() which is called from pform_module_define_port()
will delete the attribute list. They do not need to be deleted locally.
To get the correct definition for _FILE_OFFSET_SIZE we must include
the header that loads this before calling the other system headers.
This patch also fixes a minor spacing issues.
After some more thought I believe it is better for $q_full to return
'bx instead of 2 when $q_full is given an invalid id. This will make
the typical full/not full checks both return false. We still return
an error code in the status variable.
This patch adds preliminary support for implementing the $table_model()
function for Verilog-A. It is not currently functional, but the VPI
interface routines and data file parsing are mostly complete. The big
things left are building the data structures and adding the interpolation
and extrapolation routines.
We also need to fix vvp to identify constant strings/parameters in a
structural context.
This patch adds the ability to print a constant string in a
structural context. It also fixes the argument order for
structural function calls and makes a few improvements in
nexus identification.
This patch adds code to the compiler so that a constant string
in a structural context can maintain the string property. This
is needed but not currently implemented in vvp (it's still
converted to a number). A pending patch for the vlog95 target
does use this new information.
This patch adds support for calculating the average queue wait
time. This is accomplished by keeping two 64 bit values that
represent the high and low total wait time for all previous
queue elements. The current wait time for any elements still
in the queue are added to this total. The wait time total is
then divided by the total number of items added to the queue.
Significant rework of scope management to unify the handling of
types in the ieee library and types/constants/components in packages.
This involved adjusting the parser rules to manage a stack of scopes
and rewriting the IEEE library support to not use global maps for
the loaded types.
If the right hand operand of a shift is a signed vector value, it
is coerced to an unsigned value. This needs to be allowed for when
estimating the width expansion caused by a shift in a lossless
expression.
The power operator defines 2**-1 and -2**-1 to be zero. This patch fixes
both the procedural and continuous assignments to work correctly. It also
fixes a problem in the compiler power code so that the one constant value
always has at least two bits.
This patch adds support for calculating the queue mean inter-arrival
time. This is just the latest add time minus the first add time
divided by the number of intervals (the number of adds minus one).
This patch adds full support for the stochastic tasks/functions except
the mean inter-arrival and average wait statistics are not currently
available. These will be added in a later patch. This implementation
goes a bit beyond the standard and supports the following:
1. The job and inform arguments support 32 bit four state values.
2. The id for all routines, the job and inform arguments for $q_add(),
the statistic code for $q_exam() along with the queue type and
maximum length arguments for $q_initialize() can be less than or
equal to 32 bits. The argument will be sign extended if needed to
fill the internal 32 bit value.
3. The job and inform arguments to $q_remove() and the status argument
for all the routines must be 32 bits, but do not have to be an
integer variable (e.g. a 32 bit register or part select is OK).
4. An undefined bit in the id argument for any of the routines will
return a status of 2 (undefined queue id). Undefined bits are not
automatically converted to zero.
5. Undefined bits in the $q_initialize() queue type and maximum
length arguments or the $q_exam() statistic code argument are also
flagged as an error (are not converted to zero).
6. The $q_full() function returns 2 on error, the other routines that
return a value $q_remove() job/inform arguments and the $q_exam()
statistic value argument will usually return x on error.
7. An invalid statistic code will set the $q_exam() status to 8.
8. The $q_exam() statistic value argument can be 32 bits or larger.
This allows returning large statistical time values.
9. All time values are internally saved in simulation time units.
They will be converted to the calling module's time unit (with
rounding) before they are returned.
10. If a $q_exam() statistical value is too large to fit into the
variable the maximum positive value will be returned and the
status code will be set to 9 (value is too large).
11. If a statistical value is currently undefined $q_exam() will
return 10 (no statistical information) (e.g. using code 5 on an
empty queue).
This patch allows the compiler to perform early elaboration
of functions if they are encountered in expressions that are
elaborated before the function would normally be elaborated.
This makes the function available for constant evaluation.
Suitable error messages are generated if a function that is
used in a constant expression is not a valid constant function.
For now Icarus doesn't support a UDP instantiation with a range.
Instead of generating a warning about the port count being wrong
this patch adds code to calculate the range and print a message
if a range greater than one is found.
This creates the Package class to represent packages, and the
Scope class to represent scopes in general. The library functions
are worked up to support scanning scopes for declarations that are
imported by "use" clauses.
Make sure in a conponent instantiation that the instantiated
component is really declared, and that the ports of the binding
really do match the ports of the declared component. This requires
that we create and save component declarations, and that components
have methods for mapping the ports.
Certain types of expressions involving only constants would produce
ambiguous VHDL output. Fixed by qualifying one of the arguments. E.g.
('0' or '1') = '1'
Which is ambiguous becomes
(std_logic'('0') or '1') = '1'
This fixes the xnor_test test.
Reduce XNOR was implemented incorrectly because of trivial typo
Fixes regression of simple_gen test.
Also extended ivl_lpm_size API call to support all LPM types. This
simplifies some of the VHDL LPM generation code a little.
When a user or system function is called on the RHS of a continuous
assignment, and one of the function arguments is an undeclared
identifier, the compiler reports the error correctly but then
crashes. This patch fixes the crash.
This patch changes the method used to signal that a constant expression
is being elaborated from flags stored in global variables to flags
passed down the call chain. It also generates more informative error
messages when variable references are found in a constant expression.
There has been added additional default attribute to
all 'dump' function calls which is in all cases equal
to 0. Now one can specify how much this debug dumping should
be intended. This should allow people to dump smoothly whole
designs (as it was now) as far as separate units.
This is now the parent who specifies the base indentation
for all components (children). For example, architecture
"decides" how much their signals should be indented.
During elaboration, it is sometimes efficient to collapse a
collections of PV drivers to a net to a single concatenation.
This removes a bunch of resolutions and other nodes, and also
is the only way that 2-value logic should work.
During elaboration, it is sometimes efficient to collapse a
collections of PV drivers to a net to a single concatenation.
This removes a bunch of resolutions and other nodes, and also
is the only way that 2-value logic should work.
This gets us as far as emiting a component instantiation. Very little
error checking/elaboration is done, so there is room for improvement,
but this is a working stub.
This gets us as far as emiting a component instantiation. Very little
error checking/elaboration is done, so there is room for improvement,
but this is a working stub.
Up till now only "global" use clauses were parsed
and as a result libraries were loaded.
Since use clauses can appear not only in global context,
parsing of non-global clauses has been introduced and
selected names are now handled (like name1.name2.name3).
This gets us as far as emiting a component instantiation. Very little
error checking/elaboration is done, so there is room for improvement,
but this is a working stub.
These signals are declared in the architecture and are local to
the module. The Architecture already parsed and stored these signal
declarations, but this patch adds the ability to actually emit these
signals in the generated code.
In the process of doing this, I had to regularize the elaboration
and emit of VTypes, so that it can be used in multiple places, not
just in entity headers (for ports).
I also added support for bit selects of signals. This effected a couple
places in the parser, and expressions in general.
The bison grammar has been extended in order
to parse configuration statements. Parsing
remains very primitive but principal constructs
can be now recognized.
IEEE 1800-2005/9 says "each fixed-size dimension shall be represented by
an address range, such as [1:1024], or a single positive number to
specify the size of a fixed-size unpacked array, as in C. In other
words, [size] becomes the same as [0:size-1]."
This patch implements that translation in the parser. It issues a
warning when doing so when the generation flag is less than 2005-sv.
These signals are declared in the architecture and are local to
the module. The Architecture already parsed and stored these signal
declarations, but this patch adds the ability to actually emit these
signals in the generated code.
In the process of doing this, I had to regularize the elaboration
and emit of VTypes, so that it can be used in multiple places, not
just in entity headers (for ports).
I also added support for bit selects of signals. This effected a couple
places in the parser, and expressions in general.
This patch adds code to make sure a double (Verilog real) constant
is printed correctly. It also adds code to trim any leading escaped
NULLs from an expression string.
In VHDL it is allowed to have multiple architectures
per one entity. The proper architecture should be then
chosen in a configuration block. Now, if many architectures
will be found, then there will be a warning message printed.
FIXME notes are added in order not to forget about changes to
be done
This patch uses the new function (ivl_logic_is_cassign) to determine
if a logical was really the base of a continuous assignment. This
allows creating code that more closely matches the original.
This patch adds code that allows the targets to determine if a logical
gate came from a continuous assignment. This helps some of the targets
generate code that more closely matches the input.
It also reworks/simplifies the synthesis of && and || since the
compiler has already converted the two operands to single bit form
and fixes a mismatched delete from a previous patch.
This patch adds support for correctly handling most unconnected ports.
Most important is top level ports that are the root of the conversion.
This patch also adds support for emitting more signed constructs when
they are requested. $signed() and $unsigned() are still not supported
or recognized as an error when not emitting signed constructs.
This patch changes the module elaboration slightly to allow passing
the appropriate information for unconnected and top level ports. This
allows the vlog95 generator to get the basic structure correct.
These go into the architecture/block of their scope and will be
used by component instantiations to make sure the bindings are
correct and complete.
Also handle signal declarations. The elaborator will use these
to generate module local variables that are used by the architecture.
Also include support for "sorry" messages so that we have a place
to hang unsupported but properly parsed constructs.
In the process of doing this, I also encountered and add parser support
for indexed names. And matching "sorry" messages.
This patch adds a flag -pallowsigned=1 to the vlog95 converter that
tells it to allow signed signals. There is currently no code to check
for and warn/emit the $signed() and $unsigned() system functions. I
need to determine if >>> emitting should also be controlled by the
allow signed flag.
This patch adds support for emitting escaped identifiers and adds
code to correctly emit most module port expressions/definitions.
There are some minor code optimizations/cleanup included as well.
There was a single message when the expression width was larger
than the port width. This patch makes it a bit more clear by
saying that the expression was pruned.
Currently the compiler coerces input ports to inout ports whenever
there is an internal driver connected to the internal port net.
This generates an error if the port is externally connected to
something other than a structural net. This patch modifies the
compiler to ensure port coercion only occurs in valid cases.
This patch ensures that the result of a shift is an undefined value
if the right operand is an undefined value. It also improves the
code generated for right shifts where the right operand is constant
and optimises away shifts where the right operand is a constant 0.
It also fixes a few places where the expression type (signed/unsigned)
was not being set correctly.
The logic_lpm.c file uses the nexus private data pointer as an
unsigned counter. This patch makes the value unsigned long to
avoid a compilation warning on 64 bit systems.
This patch adds support for emitting fixed CA selects (zero based
variable bit and array selects also work), emitting a for statement
as a single statement and fixes for numerous little bugs. It also
adds the start of emitting module port information.
This patch adds some preliminary module port information to the ivl
interface. This may change as I investigate exactly what is needed.
It also fixes a few minor bugs (a missed local variable and spacing)
This patch adds a trace command to the interactive prompt that can be
used to control statement tracing when the code is instrumented (has
%file_line opcodes).
A valarray of an enum does not initialize to 0 so explicitly specify the
value to fill the array with. This was causing the compiler to incorrectly
report that fixed width elements in a concatenation had no size.
The following was done to remove compiler warning when using the native
compiler on OpenSolaris.
Remove the anonymous unions in tgt-vlog95/stmt.c and tgt-vvp/vvp_process.c.
Use UINT_MAX for the maximum unsigned unsigned instead of -1 in
tgt-vvp/draw_net_input.c.
Even though lex defines yywrap() to have no arguments when %option
noyywrp is used it generates a define that takes an argument that is not
used. The compiler warned about this so remove the option and add a
dummy yywrap function.
This patch adds a check on the expression type before adjusting an
unsized expression width up to integer_width. This adjustment should
only be performed for vectorable expressions.
The patch also fixes a few compiler warnings that only show up on
32-bit builds.
This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
The 1364-1995 version of Verilog does not support non zero based
parameters. This patch removes the comment requesting the parameter
MSB/LSB information to denormalize the expression and replaces it
with one stating that we need to keep the compiler normalization.
This patch removes the code that was deleting the signals in an L-value
concat if the concatenation failed to elaborate. This is incorrect since
the signal could be used in another context that is processed later. The
error message when an output/inout port fails to elaborate was also
improved to give the expression that is connected to the port.
This patch adds the rest of the functionality needed to correctly
emit both L-value and R-value procedural variable indexed part
selects as a concatenation of variable bit selects.
This patch modifies the compiler and the ivl interface to pass the
type of indexed part select that is being represented (up/down) in
a procedural L-value or R-value. This is needed by any back end that
wants to correctly denormalize the (zero based) base expression.
This patch adds support to the compiler/ivl interface for getting the
original UDP definition port names. ivl_udp_port() was added to get
this information.
This patch adds partial support of procedural variable indexed part
selects (both R and L-value). The restriction is that this currently
only works on a zero based little endian vector. I need to know if
the select is an up or down select to correctly denormalize the base
expression for the general case.
This patch adds copyright information for the Icarus generated UDPs
(lesser GPL version 2.1). It also prints a note to let the user know
that this copyrighted code is being included in the output file. They
can then remove the primitives if needed. These are likely only
needed when the output is from synthesis. At the moment we only have
a positive edge D-FF. In the future a negative edge FF and D latches
will also be needed.
Add a preliminary gate name and range (zero based) for logic primitives.
Also assert that a logic gate in a continuous assignment has the correct
number of inputs/outputs.
This patch adds code to emit variable real procedural delays by
removing the scaling that is added by the compiler. It also
recognizes that all variable continuous assignment delays are
scaled at run time.
This patch reworks the delay emitting code to handle delay expressions
better. It also encloses the emitted unary operators in parenthesis to
make sequenced unary operators work properly.
It was incorrect to extend emit_expr_signal() to handle a local signal
(a continuous assignment). The only way this should ever happen is
when evaluating a variable delay expression. It is better to do this
checking in the delayx evaluation where we know if we are processing
a delay for a statement or a continuous assignment. This keeps the
emit_expr_signal() routine cleaner and we only allow a CA delay for
a continuous assignment.
This patch fixes the following bugs in the vlog95 converter:
When emitting a signal as an expression, if the signal is local then
emit the expression that is driving the local signal.
The casts need to emit the expression.
When emitting pull devices they have different default strength rules
(pull is the default).
For compatibility pull devices should only have a single output net.
Extend the code that searches for the <var> = <delay> <value> pattern
to also check for an <event>. The previous event code only looks for
the repeat event pattern.
In principle, some of these should be handled by overloaded operator
functions, but these are built in types with natural translations so
do the obvious things.
Implement the parser infrastructure for handling library use clauses,
and use that to handle specific packages of the ieee library. Make
the numeric types come from the numeric_* packages instead of being
built in.
There are internal types that are unbounded arrays. Allow subtype
syntax that creates bounded versions of these arrays, and elaborate
them as vectors at port boundaries. This makes some interesting types
work out.
Also start replacing vhdlint and vhdlreal with int64_t and double,
which are reasonable values for universal_integer and universal_real
from the VHDL standard. I need these cleaned up because the ints in
particular are used for the literal expressions in array index constraints.
Rather then just relying on comparing type names all throughout
elaboration, create type description data structures and use them
during elaboration to handle proper types.
So translate them to lower case so that internally I don't have to
constantly worry about it. Note that even keywords are case insensitive,
so do the translation BEFORE the keyword check.
Rather then leave net types to implicit declarations, write
declarations explicitly. This will become necessary when more
interesting types are supported.
Separate elaboration from code generation in the Entity, and add
to Architectures a code generator to handle some simple cases. At
this point we have the basic structure for the VHDL compiler.
Elaboration will need a parse tree for expressions. Create one for
the expression types that are currently supported. Also add rules
and the keywords for all the remaining binary logical operators.
This patch adds a flag that emits file and line information for
most lines. This can help the user understand where the various
lines came from in the original code. They are printed as
comments so the generated code still runs correctly.
This patch fixes a bunch of objects to have the correct file/line
information. It also adds support for getting file/line information
for events (named events have a definition line).
When emitting a logical device as part of a continuous assignment
we need to use the actual inputs (not the output). We also do not
need to emit anything if the nexus is NULL. Also skip logical gates
that have a local output since they are part of a continuous
assignment and the inputs to a logical gate can be an expression
so emit them as a continuous assignment.
This patch adds the following to the vlog95 converter.
Add support for emitting and calling UDPs.
Generate a UDP for a synthesized DFF.
Add the ability do emit a constant assigned to a net.
This patch adds/fixes the following:
Adds file/line information to a UDP definition.
Prints an error message if a UDP is passed signals wider than 1 bit.
A UDP should supports a range, but the compiler currently does not.
Add scope information for constants.
Fix the Icarus extension UDP table entry element 'h' to use h.
The ivl_udp_init() value is a char not unsigned.
Add FILE_NAME() for a bunch more of the ivl interface objects.
This patch adds code that when it find a select of a constant it looks
for a parameter in the enclosing scope and the module scope that has
the same line, file and value information. If it find one that is
used to rebuild the expression. A more exhaustive search is need to
make this 100% clean.
It also uses the named scope when emitting statement inside a named
begin or fork instead of the enclosing scope.
This patch moves the logic and lpm code to a new file. It refactors
the strength emitting routine and adds support for emitting the
standard tran style of gates.
This patch adds the ability to translate the code produced by the
compiler for a wait statement back into a wait statement. It also
reworks the strength emitting code to only emit a single strength
for the pull gates and fixes a bug in the strength emitting code.
Currently the vvp target emits multiple single bit %mov instructions
to perform sign extension. This patch adds a new %pad instruction
that allows sign extension to be performed with just one instruction.
A NOOP at the end of an existing statement can be represented as ";\n"
(a simple line termination). In general a NOOP represents an empty
begin/end pair.
This patch add the following functionality to the vlog95 generator.
Add support for most CAs. Selects still don't work correctly.
Emitting a named event as an expression.
Enhance the ability to find a signal in a nexus.
Add code to emit a nexus driven by a constant.
Rework the delay/strength code for logic gates/CAs
Refactor some of the number code.
Refactor the variable emitting code to support named blocks.
Translate the compiler code back to <var> = <event> <value>
In the standard a pull device can be given both a 1 and 0 strength.
Only the appropriate one is actually used. This patch adds support
for giving both pull strength to a pull device.
This patch adds support for emitting an array as an expression. This is
used as a system task/function argument.
It partially reworks the real display code to print an appropriate
expression for NaN, inf and -inf. To get other real numbers to always
display correctly we need to build a custom printing routine that adjusts
what is displayed based on the actual bits in the double.
Add the ability to print a real variable delay. They are not scaled by
the compiler.
Since a delayx delay may be variable we must always enclose this type of
delay with parenthesis.
Fix the L-value concatenation to be in the correct order.
Handle the special case that an if with a single if as the true statement
does not loose any associated else clause to the enclosed if. Basically
add a begin/end pair as needed to make things work out correctly.
This patch fixes the following problem in the compiler:
An integer task argument should be marked as an integer port.
An implicit register can be converted to either a reg or an integer.
An old style task port should default to <no type> unless reg or some
other type is provided. ANSI style is always defined. For example:
input ri;
output ro;
inout rio;
real ri, ro, rio;
should define all three task ports to be of type real.
This patch updates the make clean target and modifies the vpath search to
match what is done in the main ivl Makefile since this one has the same
issues it does. It also adds a cppcheck target and removes the redundant
libmisc build target since the vpath already handles this.
This patch adds the ability for the user to change the spacing increment
from the command line using the -pspacing=<num> flag. The is restricted to
be a value between and including 1 and 16.
This patch fixes the ivl build to find files in libmisc using vpath instead
of a separate target. The existing constructs caused build problems after
running a make clean. It also adds an empty checking target to vhdlpp.
This patch adds preliminary support for finding the correct name for
a nexus at a given scope level. It also does the following.
Report that real modulus is not supported.
Fix a bug in the generation of concat expressions.
Add missing generation of unary ! operator.
Add ability to generate > integer delays.
Refactor some of the support code.
Make some of the error messages more descriptive.
Ignore the ALLOC and FREE statements (only used with automatic tasks).
If the left power operator expression is a numeric constant that has a
value 2^n n>0 then we can use a left shift to calculate the result. This
patch adds code to do this. All other power expressions are flagged as a
compilation error.
This patch adds significantly more functionality to the vlog95 back end.
The following are the major additions:
Display unsigned numbers without undefined bits in hex.
Add support for both L-Value and R-value bit and part selects.
Added support for out of scope references.
Added support for emitting logic gates (range not finished, name is invalid).
Added support for emitting initial/always blocks.
Add support for event inter statement delays.
Convert a blocking inter statement delay assign back to the original form.
Added support for rescaling variable delays.
Added support for the disable statement.
Added support for an event trigger statement (event name is missing).
Added support for calling a user task (calling arguments are missing).
Added support for an event based delay statement (@) (event name is missing)
Not all of these are working as expected since there is not currently a
routine to find a nexus name as a function of scope (needed for event names,
logic gate ports, etc.). Since the Icarus compiler generates structural code
the arguments to modules, module instantiations and calling user tasks are
also still missing.
Include the compiler infrastructure to vhdlpp for collecting the
file and line information and attaching it to entities and ports.
Make the parser store the file name during parse.
Create a libmisc library where I can put source files that are
used by multiple programs within the source tree.
Add enough rules to parse a simple VHDL program:
Parse library and use clauses,
Parse entity declarations, and
Parse architecture bodies.
Add some parser infrastructure:
Handle syntax errors with useful error messages,
Include file name and line numbers in parse errors,
Add some parser debug aids.
The original message talks about an unresolved net which may be
something different/more encompassing. This patch explicitly adds
uwire to the message to make it clear to the user that a uwire
could cause this message.
This patch doesn't completely fix the problem, but with it the problem
is at least manageable. The issues was that when the lexor_keyword.gperf
file is updated and you are building outside the source directory the
Makefile would create a local lexor_keyword.cc as expected. The problem
is that it always looked in the source directory for the file. This
patch adds a special vpath rule that says to look in the build directory
first and then in the source directory for lexor_keyword.cc.
This works as expected except for the first time the lexor_keyword.cc
file is generated locally. During the make invocation it compares the
source lexor_keyword.cc file to the gperf file and notices it is out of
date. It then generates a new file in the build directory, but the make
rule is still using the source file which didn't change so it doesn't
rebuild as needed. To get the new file to compile you need to run make
a second time to get the rule to execute using the local version of the
file. This extra make invocation is only needed when the local file is
first created since after that the rule always uses the local file.
I plan to look at resolving the remaining issue, but there is much
subtlety in this since you effectively need to break/rebuild the make
dependency tree to get this to build correctly in a single run.
This patch adds support for using a scope in an expression and calling
a user function. It also fixes an issue in the module name mangling
and calling a system task/function with multiple arguments.
This patch adds support for the various case statements and adds
preliminary support for instantiating modules. The module instantiation,
just like the module definition, is still missing ports. Adding this
will require modification to the compiler to get the port order correct.
Because of defparams and passed parameters any module that has a
parameter must be generated uniquely for each instance since they may not
all be the same. Modules without parameters are only generated once.
For diagnostics and to know what is really going on in the compiler
we need to keep any NULL that is in a verinum string or when
displayed as/converted to a string.
When padding a verinum string if the padding is in multiples of eight
then keep the string property.
This patch fixes a small bug found with the vlog95 back end. A root scope
should define is_cell instead of leaving it undefined. Normally I would
expect a root scope to not be a cell, but I don't think the standard
prohibits this from happening, so copy the value from the definition.
This patch adds the ability to print a delay expression (it is rescaled
to the module timescale) and adds support the following statement types:
nonblocking assignment with a delay (event control is still missing)
condition (if/else)
forever
repeat
while (Icarus translated for loops to while loops)
fork
procedural continuous assign
deassign
force
release
This patch adds support to the vlog95 convert for the ternary operator,
the concat/repeat operator and calling a system function. It also adds
the `celldefine information when appropriate.
This patch adds more support to the Verilog 1995 converter. There is
still a lot that is missing and there is still some implemented
functionality that is not 100%.
It was documented that ivl_scope_port(s)() could be used with tasks,
but the code did not support this. This patch adds that functionality
as documented. It also removes the documentation for ivl_lval_mem()
since that function no longer exists.
It was a poor choice to only add -g2009 for 1800-2009 and ignore the
previous version of System Verilog 1800-2005. This patch adds a
generation for 1800-2005 and also adds `begin_keywords support for
1800-2005. The previous SystemVerilog keywords have been put under
the 1800-2005 generation and the new one from 1800-2009 have also
been added.
When a verinum is displayed as a string we need to make sure that any
character that will be displayed as an octal constant must be converted
correctly. Also change to isprint() instead of isgraph() since it is the
same as isgraph() plus a space.
Cadence allows an ifnone with an edge-sensitive path. Until we understand
exactly what this is and how to implement it this patch adds a warning
that an ifnone with an edge-sensitive path is not supported.
Constant user functions aren't currently supported. A suitable
error message should be output when a user function call is
encountered in a parameter expression. This got lost in the
parameter expression rework.
The compiler currently performs parameter expression elaboration before
performing parameter overrides. This means that the information needed
to correctly determine the expression type and width may not be available
at the time elaboration is performed. This patch reworks the code to
delay elaboration until after all overrides have been performed. It
also provides a new -g option that controls how the width of parameter
expressions is calculated when the parameter itself is unsized.
This patch fixes a few compilation warnings introduced by the
enumeration code. It also updates the ivl.def file so that the
proper routines get exported under windows.
Using reg real [1:0] var you can define a real variable with a
range. This was crashing the run time. This patch catches this
in the compiler and prints an appropriate message.
This gets the enumeration type through to the ivl_target API so
that code generators can do something with it. Generate stub
output with tgt-stub, and generate the proper vvp run time to
make simple enumerations work from end to end.
With warnings turned sufficiently high in gcc, I get:
.../vpi_user.h:568: warning: function declaration isn't a prototype
when building VPI modules. Patch is trivial.
At the moment we only support one real driver. This patch adds a
combined error routine for a uwire or a real net with multiple
drivers. We display the top level net in the hierarchy. It also
reworks the nexus data_type calculation.
System tasks and functions can be defined to have NULL arguments.
This patch makes the @* sensitivity list calculation skip these
NULL (constant) arguments.
This patch adds asserts after new to verify that memory was allocated
correctly and adds a warning if some of the routines are called with
an invalid function name.
Create the v2009.vpi module to include SystemVerilog core
functions, and start out with some of the enum methods.
Add to vvp support for creating enum types, including some
vpi access methods.
The pform propagates the parsed enum base type information
to the elaborator so that the base type can be fully elaborated.
This is necessary to get the types of the enumeration literals
correct.
This patch covers more than it should. It removes many of the -Wextra
warnings in the main ivl directory. It also makes some minor code
improvements, adds support for constant logicals in eval_tree (&&/||),
adds support for correctly sign extending === and !==, it starts to
standardize the eval_tree debug messages and fixes a strength bug
in the target interface (found with -Wextra). The rest of the warnings
and eval_tree() rework will need to come as a second patch.
The files we get from GTKWave are not under our control so we need to
ignore the cppcheck style warnings for them. The random routines are
from the standard so they should not be changed to fix style warnings
either. We also have some weird, but correct pointer subtraction that
cppcheck warns about. This patch adds suppression files for all these
warnings. You must have the latest cppcheck from git since I submitted
a patch that adds the ability to place comments in the suppression file.
In ivl_alloc.h we redefine malloc(), realloc() and calloc() to have
standard error checking. We don't want to do this for anything that
comes from the standard headers. This specifically doesn't work if
a C++ header files does std::malloc, etc.
Also change to -W instead of -Wextra since that is more portable. I
plan to add a check from -Wextra and use it when available since it
is more descriptive.
This patch changes all the iterator code to use a prefix ++ instead
of postfix since it is more efficient (no need for a temporary). It
is likely that the compiler could optimize this away, but lets make
it efficient from the start.
When enum names are used as r-values in expressions, use their
values. Treat the enum names similar to (but not exactly as)
localparams so that they fit into the rest of the elaboration
flow naturally.
I'm adding more uses of the make_range_from_width function, so
it seems like time to get rid of its use of the svector template.
This thread led to a lot of other uses of svector that had to
also be removed.
BOOL values have a specific cast from LOGIC, this node takes care
of it. Also arrange for the elaboration to insert them in the right
planes and for the code generator to generate them.
This patch adds -Wextra to the compilation flags for C++ files in
the vvp and vpi subdirectories. It also fixes all the problems
found while adding -Wextra. This mostly entailed removing some of
the unused arguments, removing the name for others and using the
correct number of initializers.
This patch adds support for running cppcheck from the Makefile. It also
standardizes the order of some of the targets. It renames vpip_format.c
to vpip_format.cc and fixes the size of the array tables to make room
for the trailing NULL. Found when using a C++ compiler.
This patch adds a few missing initializations to various constructors
in the vvp directory. It also enhances the array alias code to copy
more values from the aliased array.
Starting in autoconf 2.68, "the macros AC_PREPROC_IFELSE,
AC_COMPILE_IFELSE, AC_LINK_IFELSE, and AC_RUN_IFELSE now warn if the
first argument failed to use AC_LANG_SOURCE or AC_LANG_PROGRAM to
generate the conftest file contents."
IVL_VT_BOOL variables at the code generator should generate
.var/2x records so that the run time can do 2-value optimizations
and otherwise support atom2 values.
SystemVerilog allows variables to be either variables or unresolved
nets, depending on how they are used. If they are assigned by
procedural code, then they are variables. If they are assigned
by a continuous assignment, they are unresolved nets. Note that
they cannot be both, and when they are unresolved nets they can
only be assigned once.
Create the .var/2u and .var/2s variable records and give them
basic implementations. Make available to VPI the proper types
for the SystemVerilog types that these variables represent.
Follow-up to "Brainless start to const-correct changes"
Still actually does nothing, but now if the #define ICARUS_VPI_CONST
in vpi_user.h is changed to const, Icarus is almost const-correct,
as checked with gcc flags -Wcast-qual -Wwrite-strings.
Choosing when to #define ICARUS_VPI_CONST const is left as an
exercise for the reader.
With these two patches applied, and the const define, there are
still about a dozen const problems left.
Results of running
cd vpi
for f in *.c *.h; do sed -i \
-e "s/_calltf(PLI_BYTE8/_calltf(ICARUS_VPI_CONST PLI_BYTE8/" \
-e "s/_compiletf(PLI_BYTE8/_compiletf(ICARUS_VPI_CONST PLI_BYTE8/" $f; done
and a trivial patch to vpi_user.h to, among other things, make
ICARUS_VPI_CONST blank.
Thus, this patch does absolutely nothing. Will be followed by a
(much shorter) patch that makes it do something. :-)
This is a fix for pr2555831. A separate entity/architecture pair is
generated for each module that is instantiated with a unique
parameter combination.
For example:
-- Generated from Verilog module child (vhdl_tests/generics.v:30)
-- MY_VALUE = 3
entity child is
To make it clear which values were used for this entity.
Conflicts:
tgt-vhdl/scope.cc
This changes the implementation of $display/$write to use VHDL
report statements rather the the std.textio functions. The code
produced is simpler and more like what a real VHDL designed would
write. However it no longer exactly matches the Verilog output as
most VHDL simulators prepend the text with simulation time, entity
name, severity level, etc. There is a corresponding change in
ivtest to support this.
Conflicts:
tgt-vhdl/cast.cc
tgt-vhdl/display.cc
tgt-vhdl/vhdl_syntax.cc
tgt-vhdl/vhdl_target.h
Previous we generated a "wait for 0 ns" statement after
every blocking assignment that wasn't the last statement
in the process. While this implements the Verilog semantics,
it generates excessive waits, and cannot usually be synthesised.
This patch only generates "wait for 0 ns" statements when it
cannot be avoid (e.g. when the target of a blocking assignment
is read in the same process).
An example:
begin
x = 5;
if (x == 2)
y = 7;
end
Becomes:
x <= 5;
wait for 0 ns; -- Required to implement assignment semantics
if x = 2 then
y <= 7; -- No need for wait here, not read
-- wait for 0 ns (previously)
end if;
Conflicts:
tgt-vhdl/process.cc
tgt-vhdl/stmt.cc
tgt-vhdl/vhdl_target.h
Add code to print a warning if the user tries to use the -S flag.
We need this warning since synthesis is not currently being actively
maintained or supported in any branch after V0.8.
An unsized signed constant that is smaller than integer_width needs
to be resized up to either the integer_width or the expression width
whichever is smaller.
Fix all the Icarus files that can be so that we do not have any
signed/unsigned compare warnings. It also removes const as a
return qualifier for two routines in discipline.h.
This patch mimics what was done for vectors, but is simpler since
arrays don't use the endian information. It also needs to address
the fact that .array/port assumes the expression is unsigned so
any signed expression must be padded to make it larger than the
maximum array word when it is converted to unsigned.
This patch modifies all the variable bit and indexed part selects
to use a common routine. This routine determines the minimum
width needed to calculate the result correctly, pads the expression
if needed and then converts the expression to signed if required to
make the calculation correct.
The Cygwin man command requires that you have a / in the path
if you want to avoid looking at the normal search path. This
patch addes ./ before the manual page file name. Which should
work on any system. It also makes the vvp generation create a
PS file like is done in the other Makefiles.
By default we generate normal manual pages. You can then
create PostScript version and from these you can generate a
PDF version.
While checking for an infinite loop in an always block I missed
the case where an if statement does not have a statement. This
was resulting in a segmentation fault.
This is a fix for pr2555831. A separate entity/architecture pair is
generated for each module that is instantiated with a unique
parameter combination.
If someone accidentally makes a parameter depend on itself
we need to report this not crash. This patch fixes the crash
and prints an appropriate string of messages to figure out
the loop. Icarus currently supports forward references of
parameters so more complicated loops can be created. These
are also caught.
To prevent a force from back propagating we need to keep a BUFZ
that represents a continuous assignment between two nets. This
only effects continuous assignments of the form assign out = in.
In general these are fairly rare so keeping them has minimal
impact on the simulation speed.
Add code to print a warning if the user tries to use the -S flag.
We need this warning since synthesis is not currently being actively
maintained or supported in any branch after V0.8.
For example:
-- Generated from Verilog module child (vhdl_tests/generics.v:30)
-- MY_VALUE = 3
entity child is
To make it clear which values were used for this entity.
This changes the implementation of $display/$write to use VHDL
report statements rather the the std.textio functions. The code
produced is simpler and more like what a real VHDL designed would
write. However it no longer exactly matches the Verilog output as
most VHDL simulators prepend the text with simulation time, entity
name, severity level, etc. There is a corresponding change in
ivtest to support this.
Previous we generated a "wait for 0 ns" statement after
every blocking assignment that wasn't the last statement
in the process. While this implements the Verilog semantics,
it generates excessive waits, and cannot usually be synthesised.
This patch only generates "wait for 0 ns" statements when it
cannot be avoid (e.g. when the target of a blocking assignment
is read in the same process).
An example:
begin
x = 5;
if (x == 2)
y = 7;
end
Becomes:
x <= 5;
wait for 0 ns; -- Required to implement assignment semantics
if x = 2 then
y <= 7; -- No need for wait here, not read
-- wait for 0 ns (previously)
end if;
This patch adds a check in the vvp back end that a uwire has
at most one driver. Previously this was just converted (with
a warning message) to a wire just after elaboration.
This patch adds the ability to call a system function as a task for
the SystemVerilog generation (-g2009). The return value is really
calculated, but it is ignored.
E.g. $signed(x) > y with x, y different sizes should be
resize(signed(x), N) > y
Not
signed(resize(x, N)) > y
As this does not treat the sign bit correctly. Was causing
the signed5 test to fail.
Added 'expr_wid' parameter to calls to 'eval_expr()' within
PEBinary::elaborate_eval_expr_base_()'. This makes a specific problem
go away and may even be the correct thing to do.
This patch adds support for a UDP with variable delays. In the process the
intrinsic support for delays was removed from the UDP functor and replaced
with a call to the .delay functor. Both a normal gate and a UDP now use the
same code to generate the delay.
This patch adds checks that the delay count is correct for the
various gates and adds support for a missing variable decay
time. For this case the decay time is the minimum of the rise
and fall times. This is denoted by setting the decay variable
to 0 in the vvp file. vvp notes this and sets an ignore decay
time property in the base delay. This turns off the ability
to set the decay time and the minimum delay calculation will
also update the decay time.
These checks are not needed since we have already verified that
we have a 64 bit immediate value. This is likely old code that
should have been removed when the original functionality was
changed.
This patch pushes delays for tranif gates to the code generator.
We still need to add checks for the number of delays, etc. For
now an error message is printed when a tranif gate is given a
non-zero delay.
This patch modifies the real ternary operator code to support
unlimited tail recursion without overflowing the thread
registers. Head recursion is still limited by the available
registers.
It fixes the thread word checks to use a new define that has
the correct number of thread words (16). It adds a message
instead of just an assert if the thread words are exhausted.
And it also changes some of the error messages to use vvp.tgt
in the message to be consistent with the other messages.
Elaborate conditional assignments with BUFZ devices that do *NOT*
preserve strengths. Add a BUFT (transparent) device that can be
used in those cases where I really need a transparent buffer.
We only need to set the width of a multiple if the width is greater
than zero and if the expression is vectorable. This matches what is
done for addition.
A real delay must be scaled and rounded using the local precision
before it is finally scaled to the simulation time units. This
patch fixes the compiler to do this correctly or generate the
correct code for run time calculated delays. Delays in a CA
already worked correctly. The run time was also fixed to scale
modpath (SDF back annotation) delays correctly.
This patch modifies the vvp main code to cleanup if there was an
error compiling the input file. There are still a few issues, but
this takes care of most of them.
The error routines for task and function definitions were incorrectly
popping the scope. This should not be done since no scope was pushed.
Also assert that the current_task/function is 0 to catch that kind of
error like the other definition rules.
This patch adds two new opcodes and the infrastructure needed to call
system functions as tasks. The normal %vpi_call will generate an error
if a system function is called as a task. %vpi_call/w will generate a
warning and will ignore any value returned by the function. %vpi_call/i
will ignore the system function return value and will not print a
message. Adding this is a feature request and is supported in
SystemVerilog. Next I need to add flags to control this depending on
the compiler generation and possibly other flags.
I may leave the cast to void (%vpi_call/i) functionality unimplemented
for now.
This patch caches the vpi_call error messages (task/function does
not exist, task being called as a function and function being
called as a task). This allows us to display the file name and line
number information for the invalid usage.
When pushing the current file path we need to get past any `define
expansions that have been pushed onto the stack to find the real
file path.
This patch is partially based on a patch submitted by Steve Tell.
This patch avoids a crash when trying to use a parameter/localparam that
has been assigned a value from a constant user function. Icarus does not
currently support constant user functions so it creates a parameter with
a NULL value. This patch fixes a few places where this could crash the
compiler.
You need to probe the expression width before trying to elaborate and
evaluate an expression. The eval_path_component() routine was missing
this and was causing an assert.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
gcc on OpenBSD reported shadow warnings for variables, arguments named
log, time and exp. This patch renanes those variables to logic, timerec
and expr.
This syncs fstapi.c to the latest from GTKWave CVS. This cleans up
most of the issues. I still have two to track down, but I think they
are cppcheck bugs not fstapi.c deficiencies.
The fstHandle is only a uint32_t so to avoid compiler warnings on 64
bit systems cast this to long before casting to a pointer.
Also reformat some of the code to match the rest of the Icarus code.
This patch documents that the lxt2/lx2 dumper supports -speed and
-space options. It adds -speed, -space, -space-speed and
-speed-space options for the fst dumper. Here are results for a
gate level back annotated design using the fst dumper.
<none> 12.88 seconds 3.5 Meg dump file.
-space 12.89 seconds 2.9 Meg dump file.
-speed 12.36 seconds 4.6 Meg dump file.
-<both> 12.84 seconds 3.2 Meg dump file.
We keep a scope list that is checked to verify that we do not try
to dump duplicate scopes or variables. Since the scan_item routine
can not add duplicate scopes we only need to sort the list after
the scan_item routine is called. Calling it every time a scope
was added was creating a significant startup delay for gate level
simulations since the sort routine is called for every scope in
the design (possibly thousands of times).
This mostly matches what was done for the LXT dumper except the
LXT dumper was incorrectly sorting before not after scan_item
was called. This would not catch a duplicate variable just
after a scope was added in a $dumpvars call.
The lxt2 routine was referencing the lxt not the lxt2 versions
of the space/speed flags. This also adds the lx2 version of the
flags. These were already supported in the sys_table.c file.
This patch is a slight modification to files Tony Bybell (the author of
GTKWave) send to me. We still have a few more changes we plan to make,
but this should be functional enough for initial testing. Multi-treading
and speed/size flags will be added shortly.
The make_pair() routine has a PExpr* as the second argument. Not all
compilers can promote a child correctly, so just assign the child type
to a PExpr* when they are created solves this issue.
vpi_config.h defines _FILE_OFFSET_BITS. This must be defined before
any system includes files are processed, so vpi_config.h must be
called first. This patch puts vpi_config.h first. It also removes
direct calls for both vpi_config.h and vpi_user.h when sys_priv.h
is included since it already includes these two files.
It also updates the code to always include vpi_user.h using double
quotes.
Using -xMD generates dependencies for all files including the
system files. This could point to some system .cc files and
was causing GNU make to try to build these files if the
dependency files existed. Using -xMMD generates only the
dependencies outside the system directories.
It's possible that the OpenSolaris make knows how to deal with
this correctly, but Icarus needs GNU make.
This is generating an octal constant but there is no reason to have
three '\' characters. You need two to get the leading '\', but the
last one is not needed.
The SunPro compiler does not support struct definitions inside an
anonymous union. This patch moves the struct definition so that both
gcc and SunPro 12.1 compile this without issue.
gcc supports creating an array with a run time defined size. The
SunPro compiler for OpenSolaris does not. This patch converts the
array creation to use conventional (malloc based) array creation.
This patch is similar to the previous patches and cleans up a single
place in the vvp directory where an enum had a trailing ',' and a
place where a C++ routine needed extern "C".
Some new shadow issues have crept in. This patch fixes these new
issues and adds -Wshadow to the normal warning flags to keep any
new occurrences from happening.
Since the base lxt_write.c and lxt2_write.c files reference <config.h>
instead of "vpi_config.h" all their definitions need to be moved to
the main config.h include file.
This patch updates all the Makefile.in files and configure.in
as follows:
Do not use the -Wall warning flag when using the SunPro compiler.
The SunPro compiler uses -xMD instead of -MD.
There are still more fixes needed before Icarus will compile
on OpenSolaris.
Tran islands must do their calculations using the forced values,
if any. But the output from a port must also be subject to force
filtering. It's a little ugly, but hopefully won't hurt the more
normal case.
The comparison and reduction operators only have a single output bit
that can be delayed.
The comparison of real values always produces a logical value so the
delay type is not dependent on the arguments type.
The repeat expression is evaluated in a self determined context
(expression width == -1). It needs to call probe_expr_width() to
figure out the width needed by the expression before calling
elab_and_eval() to elaborate the expression.
This patch updates the lxt_write.h and lxt2_write.h header files
to the latest ones from GTKWave CVS. It also adds HAVE_INTTYPES_H
to the vpi_config.h.in header.
This patch fixes two places where Icarus under certain conditions
would try to free a NULL iterator value in $dumpvars(). $dumpvars()
can have a NULL argument to indicate that all variables should be
dumped. Under two error conditions the code was trying to free
this NULL argument reference.
The standard does not define if vpi_free_object() can support a
NULL reference. Icarus does not currently allow it (it asserts).
This patch adds support for converting bit based ports to real signals.
You can only do this for single instances. Arrayed instance would
create multiple instances driving the same real signal.
Any real port can be connected to a bit based signal. The only limitation
is that the signal width must be an integer multiple of the instance
count since all the real conversions must have the same width.
Also add an error message for an arrayed instance with real to real
output connections. Again multiple drivers.
This patch also adds errors for inout real and bit based inout ports
driving a real signal. There is no logical way to deal with the full
capabilities of inout and real ports/signals. So for now they are not
allowed.
This patch remove the old VAMS $log function. It could create confusion
with the Verilog $log task. Recent versions of VAMS and 1364-2005 use
$log10 for the base 10 logarithm.
Comparison expressions have sorta-self-determined arguments.
Handle the special cause that some of the arguments may be
themselves unsized, and so expecting to be even wider then
otherwise.
Operands to reduction unary operators are self determined, so
evaluate the operands that way. But this means that binary expressions
in this context should take pains to use their test_width tested
expression width.
This exposed a case where the test_width methods were not called
for self-determined expressions. Fix that too.
It is acceptable to call delete on a NULL object. It's also acceptable
to assign the value to zero if it is already zero. Removing the
superfluous if should produce slightly better code since there is no
conditional to deal with except for what is likely in the delete
implementation, but that should be highly optimized.
This patch cleans up some style issues: no need to check that a value
is defined before freeing or deleting it, use C++ style casts, make
sure to NULL terminate strncpy(), empty() is faster than size() for
size == 0 or size >= 0 checks, re-scope some variables, etc.
When searching for a symbol we do not want to search up the
hierarchical stack if the symbol we are searching for was
prefixed with a hierarchical path.
This patch adds support for iterating over the list of vpiUserSystf
tasks/functions that have vpiUserDefn set. The vpiUserDefn property
is true by default, but you can call vpip_make_systf_system_defined()
to set this property false (will hide the vpiUserSystf object). All
the normal system tasks/functions have been modified to call this
procedure to remove them from the list of vpiUserSystf objects. Only
user defined system tasks or functions should appear in the list.
vpi_compare_objects() is just a simple are the two pointers the
same. This works correctly for the vpiUserSystf objects, but the
other handle objects have not been checked.
This patch changes system tasks and functions to use the vpiUserSystf
property and returns this information when vpi_register_systf() is
called. It also adds the vpiUserDefn property for system tasks and
functions which for now always returns 1 (true). System task and
functions can now get a handle to this information using the
vpiUserSystf property. vpi_systf_info() returns pointers to the
real data so the user will need to be careful when using the pointer
fields (e.g. tfname, user_data, etc.). This is a shallow copy. A deep
copy would require the user to free the various fields and I'm not
certain it is even possible or desirable to copy the user_data for
all cases.
A stub for vpi_compare_objects() was also added since I will need
that when testing the second half of the patch (add iteration over
all the vpiUserSystf objects and add a method to control vpiUserDefn).
The latest gcc with the latest Cygwin complains when passing a char to
the toupper, tolower, isspace, isalnum, isprint, isdigit or isalpha
functions/macros. These functions are defined to take an integer. This
patch adds cast to int as needed to remove the warnings. After this
there are still two warnings related to signed/unsigned comparison in
yy_get_next_buffer() (part of flex).
To ensure the initial propagation of 'x' values at time-0 does not
trigger any events, the propagation of these values needs to be
completed before any statements that wait on events are executed.
vvp has a pre-simulation event queue to handle this, but some
functors defeat this by postponing their output propagation using
the stratified event queue. This patch fixes this by using the
pre-simulation event queue to schedule functor output propagation
until initial value propagation is complete.
To match the behaviour of other simulators, delayed bit-based signals
should have the value 'x' and delayed real valued signals should have
the value 0.0 until the true initial value has propagated. This patch
provides this behaviour.
Under certain circumnstances, the vvp code generator can generate
a .part/pv that directly feeds an input port of a .concat. This
patch adds a recv_vec4_pv method to the vvp_fun_concat class to
handle this case. It also changes the initial value of the stored
vector from X to Z to correctly handle bits which are not driven.
If a net is driven by a simple variable, an initial 'x' value is
propagated to the net at time-0. The same thing should happen if
a net is driven by a variable array word. This patch makes this
happen by scheduling an initial event for each array port attached
to a variable array.
The SDF file format supports zero or more timing specs. Previously
the parser was one or more. Things like tie high/low cells do not
have any delay information so zero or more is needed and matches
the standard.
When building a modpath the source for the modpath must have the
same scope as the modpath. This is required to make the back
annotation work correctly (have the correct names).
This is the initial commit in an effort to build a 1364-1995
back end for Icarus Verilog. It is expected that this back end
will allow the user to write 1364-2005 RTL and then using this
back end (converter) generate functionally equivalent 1364-1995
compatible code. This can be used to support older tools in a
work flow. The primary focus will be simulation equivalence,
though I expect to verify logical equivalence as well.
The vpi_get_value() function should not crash when called during
the compiletf phase. This patch fixes this by returning 'bx for
any vectors in thread space. It also fixes some other minor things
that my test code uncovered. Most of the other objects work as
expected.
This patch enhances elaboration to drop/ignore zero replication
count constants. Not doing this was causing problems later in
the compiler. We still pass non-constant expressions since
both user and system functions must be run for their possible
side effects. Constants can never have a side effect so just
dropping them is acceptable.
This patch adds support to $sdf_annotate to ignore RECREM constructs
in the SDF file. It also adds the ability to not specify all the
values in a rtriple (e.g. 1.1::1.6).
This patch adds support for passing the delay selection to the
VPI interface. It adds a new property to both the vpi_get and
vpi_get_str calls to return the current delay selection. It also
defines three constants for minimum, typical and maximum
delay selections.
This patch adds support for passing the delay selection to vvp.
It adds a new header :ivl_delay_selection "<value>"; that has
the values TYPICAL, MINIMUM or MAXIMUM depending on the -T
flag to iverilog. This information is needed by $sdf_annotate
to select that appropriate value for a triplet when
"TOOL_CONTROL" is specified (default).
This patch mimics what was done for normal assignments to get the
width correct for nonblocking assignments when converting a real
r-value to a l-value vector.
A named event does not have an edge so taking a posedge or negedge
is illegal. This patch adds an error message for this. Before the
edge was being ignored for named events, but this is incompatible
with other tools.
Generate schemes may nest freely, but generate regions
(an anachronistic concept from 1364-2001) cannot nest,
not within schemes or other regions. Have the parser detect
the nesting and print an error message.
Move check of the value $fatal is called with from the compiletf to
the calltf routine, since the value may not be known at compiletf
time. If the value is invalid, it just prints a warning that $fatal
was called with a bad finish_number, and resets it to the default 1.
Changes the compile time check for a numeric argument to a warning.
Also, fixes bug where $fatal called without an argument causes problems.
When selecting bits from unsized literals, we do not put a limit
on the size of the literal, so there is no top above which we
stop getting literal bits.
Icarus does not support interconnect delays so INTERCONNECT is
currently ignored. The SDF parser does not currently support a
bit select as a port_instance. Since we are already ignoring
the INTERCONNECT I added support for bit selects there. This
is probably the most common place to find them.
This is part of the 1800-2009 standard (Section 23.3.2.3) and allows
ports of module instances to be declared like:
modname instance(.foo, .bar);
instead of
modname instead(.foo(foo), .bar(bar));
The only tricky part about this is the implicit port connection shall
not create an implicit net declaration. To make this happen, the path
of least resistance was to add a bool to PEIdent indicating that it
should not implicitely create a net.
This does not rely on the generation flag to be 2009, following the
trend that new port naming convention (like ANSI style ports) work
regardless of the generation.
Added generation flag -g2009 which enables support for 1800-2009
constructs. Added related support such as "1800-2009" in the
`begin_keywords directive.
Keeps 2005 as the default generation for now.
Removed the -gsytem-verilog flag and folded the 1800-2005 stuff into
1800-2009. The rationale behind this is we have so little of
1800-2005 actually implemented that it does not make sense to
distinguish between 1800-2005 and 1800-2009 SystemVerilog extensions,
so we just count them all as the new 1800-2009 Verilog language.
When using MinGW, routines registered via atexit() inside a
DLL are only called when the DLL is detached. If not detached
manually, DLLs are automatically detached *after* all remaining
open files are closed. This meant that by the time the LXT or
LXT2 close_dumpfile routine was called, the dump file handle
was no longer valid, so any remaining output was lost. This
patch fixes the problem by manually detaching the VPI modules.
Like I did for SystemVerilog the other day this patch adds all the
Verilog-AMS 2.3.1 keywords. This necessitated adding one my byte
to the gperf -k argument (byte 9) to make the laplace_?? tokens
have a unique hash.
This patch adds the SystemVerilog keywords to Icarus. This allows
use to easily verify that out plain Verilog does not contain any
SystemVerilog keywords. The keywords are not parsed in any way.
When parsing a Verilog file using -gsystem-verilog any identifier
that is a keyword will cause a parse error. It is the users
responsibility to figure out the problem since bison does not
give nice error message when it finds a keyword instead of an
identifier.
When handling the $signed/$unsigned system functions, the compiler
was applying the new signed/unsigned property to the NetExpr object
representing the input argument. This caused the input argument to
be evaluated incorrectly. This patch fixes this by applying the new
property to the NetExpr object created to pad the result to the
required size.
In testing this fix, it was also discovered that the width of the
input argument expression was not being calculated correctly. This
patch also fixes this issue.
Creation of implicit nets requires knowledge of whether an identifier
has been declared before it is used. Currently implicit nets are
created during elaboration, but by this stage the order of declaration
and use is not known. This patch moves the creation of implicit nets
into the parser stage.
After changing an array word, vvp propagates the change to every port
attached to the array. The code did not properly handle the case of
an array port declared in an automatic scope with an associated array
declared in a static scope.
The process of inverting and copying can be collapsed into a single
operation that should run a little faster. Also, inverting readily
vectorizes itself. I've also possibly reduced useless vvp_not_fun
iterations.
Also, include some minor tweaks to the vvp_vector8_t handling of
vector copies. This is more to clean up code, although it should
slightly improve performance as well.
The zero element was already returned so it can not be reused a
second time. This was crashing when things went off the end of
the list since the do all functor was off by one.
In a typical debug simulation run, a user tracing all the signals
in the simulation may wind up creating millions of these. Rework
the vcd_info structure to be more compact and possibly faster to
scan.
The scope thread rework broek --with-valgrind builds due to the
different handling of the list of threads. Rework valgrind enabled
handling of the thread set within a scope.
Rather then lock/unlock the work queue ring for every item, save
tons of pthread lock manipulation by allocating to the producer
in batches. Over the long run, this doesn't change the CPU balance
or hold up either thread, but it eliminates almost 3/4 of the
lock/unlock episodes.
The time change is usually a trivial operation, so instead carry
a timestamp on all the work items and let the work thread decide
on its own when to do a SET_TIME operation. This reduces some
pthread overhead and thus gets us some better performance.
The scope contains the threads running within. The rework of this
patch allows all threads to know their scope, and cleans up the
handling of threads listed in the scope.
The padding for a signal select was using the signal to determine
if the padding should be singed or not. In reality this should be
unsigned padding unless the select was enclosed in a $signed().
dlltool which is used by both MinGW and Cygwin to create dynamic
libraries must have the name of the executable it creates the
library/information from exactly match the installed executable
name. If we have a suffix then it must be used. This patch adds
that to the build process for vvp since it can be installed with
a suffix. It also modifies the check routines since you must run
vvp with a suffix if the library it links to was built for a
suffixed executable.
In combination with the patch to make all operations on thread words
operate on 64-bit values, this patch ensures casts between real values
and large vector values work correctly.
The vvp thread word storage had previously been changed to always store
64-bit values, but some instructions still only operate on native long
values. This patch ensures all instructions that modify thread words
support 64-bit values.
When passing an argument to a user function in a continuous assignment
we need to sign extend the value if it is signed and too short. We need
to crop an argument if it is too long.
When evaluating a function argument expression we need to use either
the expression width or the argument width which ever is larger. This
matches the way normal assignments work. We then only take the bits
needed at the end.
Newer versions of GHDL seem to be stricter when checking this than
older versions. ModelSim still accepts an incomplete with-select,
however.
This patch makes the output 'U' if none of the conditions match.
We do have one C program in the vvp directory so add CFLAGS to
the Makefile. This patch also modifies the two local programs
tables and version to use -Wall.
The function draw_scope was extracting the input/output parameters
just by looking at the (unordered) list of signals in the function
scope rather than using the ivl_scope_ports list.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for C directories
like this it makes sense to enable the warnings. It also does
not recognize that an assert(0) or assert(false) ends a routine
so it complains about no return at end of function or variables
not being defined.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but we may as well get
rid of the warnings we can. It also does not recognize that an
assert(0) or assert(false) ends a routine so it complains about
no return at end of function or variables not being defined.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for C directories
like this it makes sense to enable the warnings. It also does
not recognize that an assert(0) or assert(false) ends a routine
so it complains about no return at end of function or variables
not being defined.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for this directory we
may as well squash as many warings as we can. It also does not
recognize that an assert(0) or assert(false) ends a routine so
it complains about no return at end of function or variables
not being defined.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for this directory we
mas as well remove the warnings we can. It also does not
recognize that an assert(0) or assert(false) ends a routine so
it complains about no return at end of function or variables
not being defined.
Currently the compiler only applies defparam statements that are
found in the initial root module hierarchy. This patch ensures that
defparam statements within scopes created by generate constructs or
instance arrays are also applied.
The NetEvent::find_similar_event method should limit its impact
on the netlist (and Nexus objects) by reducing the candidate event
list as it goes, instead of collecting data and testing later.
It turns out that although there was all kinds of code to manage
these members, there were no uses anywhere. It must have been a
legacy from a previous era. So remove the dead code so that it
doesn't confuse me again.
Remove some wasteful and excess scans of the Nexus of some links,
and remove dead code so we can see what we're doing. Also inline
some commonly used and trivial functions.
Child scopes need to be accessed quickly, so use O(LogN) maps for
the children instead of O(N) lists.
Also, ivl_net_const_s objects exist in huge abundance for some kinds
of designs, so put some effort into reducing their memory footprint.
Once code generation starts, the Nexus structure no longer needs to
support fast insertion/connect operations. So have the code generator
lock down the Nexus structures and adjust the Link lists for optimal
access during readout.
When netlists get very large, the Nexus::connect() method tickles
the O(N) performance and elaboration gets very slow. Rework the
connect method to be O(C), for a drastic performance boost for
large designs.
This simplifies and reorganizes this function in order to improve
the performance of this function by a constant factor. I think we
really need to improve this by an entire order (and not just a
simple factor) but this helps.
The MinGW executable should be able to support a path with mixed
separators, but to make things consistent all the path in the main
driver program (driver/main.c) now always use a '\' or convert a
path to use '\' (e.g. getenv() returns a path with a '/').
The fix for pr1830834 causes vvp to only delete a completed thread
when the simulation time next advances. If a procedural model is
being simulated which makes many task or function calls within a
single time step, this can lead to excessive memory use. This patch
modifies the behaviour so that thread deletion is only delayed if
that thread has caused a sync event to be placed in the event queue.
This should catch all cases where the thread private data can be
accessed after a thread has terminated.
The functionality of the integer power operator is specified in
1364-2005 on page 45-46 and specifically Table 5-6. This patch
fixes the verinum pow operator to work as specified in this
table. It also fixes an error in the == operator when both
operators are signed and only the left argument is negative.
These explicit dependencies are not normally needed (because they
are covered by automatic dependency generation) but when the "-jN"
flag is passed to gmake, they help gmake schedule parallel builds.
(cherry picked from commit 5479aaf721)
This patch updated the four file lxt_write.{c,h} and
lxt2_write.{c,h} to the latest ones from GTKWave. This
required adding the wavealloc.h include file and an
update to configure.in and vpi/vpi_config.h.in to add
checks/definitions for ALLOCA and FSEEKO.
This patch adds support for spaces in the path to the temporary files.
Adds support for spaces in output files and in library paths.
A space in the installation path is only supported under MinGW
(windows) at this time.
This patch converts a few sprintf statements to snprintf
to protect against buffer overflow.
It also converts a few sizeof calls from sizeof(x) to
sizeof x like other places in the code.
Add driver-vpi to either SUBDIRS or NOTUSED depending on if we
are building for MinGW or not. This is more logical and allows
the clean and distclean targets to be simplified.
During startup it is possible for input port to not yet be
initialized even after some other input ports trigger the
function to be evaluated. Handle this case by substituting
a vector of 'bx for the uninitialized inputs. This will shake
out when the simulation gets going, and only matters for user
defined functions in continuous assignments.
While we're at it, have vec4_unfiltered_value return a reference
to reduce copying of vectors.
This patch adds support for spaces in the install path on MinGW.
It does this by converting the Long version of the iverilog path
into a Short version that does not have spaces in it. If we don't
do this then we can not add support for other arguments with
spaces in the path or filename. It also modifies the driver-vpi
program to support spaces in the saved ivl path. This is done by
just enclosing the include and library path argument in double
quotes.
The issue on MinGW is that if you put the executable argument to
system in double quotes to escape embedded spaces then you can
not put the arguments in double quotes as well. If you convert
to a Short name then the spaces are removed and we can in the
future escape the arguments as needed.
This patch fixes a few more issues related to building
in a remote directory. The start of the problem was
that the version file was not getting built correctly.
This necessitated using vpath instead of VPATH to only
allow the %.cc files. After that a few other places
needed to have $(srcdir) added.
The distclean target was also enhance so that when
building from a remote directory (srcdir != .) we
remove all the extra files and directories.
Try to put all the version stamps into common version_base.h
and version_stamp.h header files. All the source programs then
get their version from these header files.
Also handle the version stamps in the man pages by using the
version_*.h header file contents to edit the version strings
in the man page title bar markers.
If the source and destination of a subvector to be moved in the
vvp_vector4_t::mov method is nicely word aligned, and the transfer
size is a full word, then we ar much better off handling that as
a special case. This makes the move faster, and also avoids some
shift overflow errors.
If the delay has an event pending for the current time, then use
that as a reference for calculating the next delay. If that is not
done, then the delay calculated against the wrong reference might
result in zero, and bad results.
For the %mov instruction, implement a vvp_vector4_t::mov method to
manipulate the thread vector directly.
For the %load/v instruction, rework the vec4_value() methods to
avoid creating vvp_vector4_t temporaries, and therefore reduce the
copy overhead.
If a function in a continuous assignment is passed an array word as
an argument, syntactically incorrect vvp code is generated. This is
because the code calls draw_net_input to generate the input labels
part way through writing out the .ufunc statement. If an input is
an array word, draw_net_input causes a .array/port statement to be
emitted, which gets written out in the middle of the .ufunc statement.
This patch fixes the problem by collecting the necessary input labels
prior to starting writing the .ufunc statement.
The $setuphold and $recrem timing checks can create delayed signals
that are needed to get a model to work correctly when negative timing
check values are used. Since we do not support timing checks and just
ignore them this can create simulation problems when a user tries to
use these delayed signals since they are not driven.
This patch adds a waring when the circuit is being compiled that these
delayed signals will not be driven. This will be needed until we get
time to add the real timing checks are mimic the delayed properties of
the timing check.
Minor fixes and code reorganization to remove a few more issues
that cppcheck is complaining about. It has a few false warnings
and some issues that need more investigation.
Apparently, the vpi_user.h definitions for vpiStop et al were added
before they were standardized by 1364-2000, and never corrected.
Change the values to be standard. (Submitted by Matt Trostel.)
I also added some binary compatibility for existing .vpi modules
that were compiled with the older constant values.
This patch removes bin32 from the clean targets since it is no
longer user/created. It adds autom4te.cache to the distclean
target in the main directory. It removes the files in driver
that are not created (lexor.c parse.c, etc.). The *.cc.output
files are no longer created so removing them is not needed.
The local "memory.h" file is no longer used in V0.9 or development,
so it does not need to be included in vvp/codes.h. The VHDL target
does not use the system <memory.h> header file so there is no need
to have a define for it in the vhld_config.h.in file.
This patch modifies the iverilog -M command line option to allow
the user to specify an optional output mode that controls which
files get added to the dependency list. This allows the user to
either get a list of all files that contribute to the design,
or a list of the include files, or a list of the module files.
The .delay (x,y,z) functor and the get_number_immediate() function
only supports 32 bit delay values. This patch adds an error message
if the user passes a larger, but valid value.
- Add missing dependency of configure on aclocal.m4.
- Remove config stamp files in make distclean (and fix another for
loop in base make distclean that I missed)
- Add stamp files to .gitignore
Use the time stamp file technique recommended by the autoconf manual
to prevent unneccesary rebuilds because of an unchanged config.h.
Uses the automake trick of generating the stamp files in the
_AC_AM_CONFIG_HEADER_HOOK macro instead of littering the source
directory with stamp-h.in files.
Add an extra ./config.status run after ./config.status --recheck
because with --recheck it doesn't actually try to remake the generated
files (and thus doesn't make the timestamp files). Thus without the
extra run, each stamp-*-h target would need to independently run
./config.status to make sure it wasn't changed by the configuration
change.
An orthogonal fix of how config.status is called in subdirectories.
When in a subdirectory and config.status is called with
../config.status and $(srcdir) is a relative path, config.status gets
confused. Fixed by replacing '../config.status --file=Makefile.in'
with 'cd ..; ./config.status --file=<dir>/Makefile.in'
Instead of calling make in subdirectories using a sh for loop, use GNU
make's $(foreach ) to create a string of commands connected with &&.
This way an error in a subdirectory will stop the build, instead of
continuing on to the next subdirectory, which the old version does.
Also added rules to regenerate configure when configure.in changes,
and to run config.status --recheck when that happens.
This patch adds code to cleanup system functions driving a
continuous assignment. It also modifies the user function
cleanup to not interfere with this. It also adds a count
of the nets and signals that were not cleaned up that is
pnly printed when running valgrind. They are not flagged
y valgrind since they are pool managed objects. There are
a few signals that need to be cleaned up and local nets
are missed so there are a lot of nets.
Even open nets have a driver for HiZ. The BUFZ is needed as something
to hang .net objects. This is another step closer to not needing the
"create_constant_node" hack in vvp/words.cc.
In the olden days, the .alias was necessary to create a net name
that is an alias to an existing net in the netlist. But now that
the .net no longer creates a node in the netlist, ALL .net objects
are aliases of a sort, so this (mis)feature gets in the way.
This patch adds cleanup code that cleans up the memory that is
allocated by the of_EXEC_UFUNC command. This knocks a few more
files off the valgrind list.
The constant $clog2() was returning a value that had an integer
width, but it did not have the sign bit set. This could result
in incorrect math expressions. This patch sets the sign bit for
the constant $clog2() result.
In the MinGW version of iverilog-vpi (C version located in driver-vpi)
we must only look at the first word of the IVERILOG_VPI_CC definition.
A recent change to the configuration process made this equal to
"gcc -std=gnu99" which will not be found when looking for the
gcc executable. We nee to look for "<path>\\bin\\gcc.exe". This
patch modifies the driver to only use the first word when looking for
the compiler, but uses the full value when compiling.
The tranif input pins are normally nothing special, but sometimes
they are fed back from the switch body. In this case, the control
needs to see the current *output* from the fed back port, in order
to get the results that people expect.
Control inputs (i.e. the control input to tranif switches)
are not driven in any way by the island, so use .import records
instead of .port records to bring them into the island. Properly
handle the now potentially different bindings within the island
and outside the island. This means the draw_net_input_x function
is a little more sophisticated, and the node data more complex.
When AC_PROG_CC_C99 was added recently we created an implicit
requirement for autoconf version 2.60. This patch makes that
implicit requirement and explicit requirement.
This is needed to get vvp to compile under MacOS 10.6 and possibly other
64 bit systems that define uint64_t as unsigned long long vs unsigned
long (both are 64 bits).
It turns out that it is possible for an otherwise constant net
mux to be non-constant if there is a force that can drive the
net. This can be detected as an l-value reference to an otherwise
constant selector.
Add a configuration check that says we would like to use C99 if the
compiler supports it. Also change the lround(), nan(), fmin() and
fmax() checks to look in the default libraries as well as the math
library.
Update the iverilog-vpi sh script to correctly quote CC since it
may now have two words (gcc -std=gnu99).
Add a missing int for main in draw_tt.c.
Local nets that have no (zero) drivers are dead weight. Since
they have no drivers, they are not being used anywhere. Since
they are local, they are not force-able.
This doesn't have any significant runtime consequence other then
to create a functor that is otherwise stable. But this does connect
to .net nodes more naturally, and gets me a step closer to banning
Cx<> labels as arguments to .net records.
Nets that are created after being put off for later processing to
allow the vvp_net to be created, need to be more carefully placed
in the correct scope.
Under some situation the optimized repeat expression can get out
of sync while it is being processed this causes the code to
reference freed memory. This happens when the repeat expression
is converted to an unsigned integer, but the repeat expression
is used in a different path. It was easier to just remove the
optimization then track down the convoluted call sequence that
was causing this and then figure out what needed to be fixed.
The repeat expression must be constant, so is likely not too
complicated so this optimization is very minor and should not
be missed.
When releasing a net, the release method must force that the
filter propagate the released value to the output. Use the
needs_init_ flag to do that force.
The vpi_callback base class is parent of the filter object of nets,
and not the functor. The good news is the clear_all_callbacks method
can now be got at without casts.
If the part select is too wide in both the top and bottom ends,
this patch fixes the calculation of the top pad. The compiler
was generating too much pad if the select also extended below
the expression.
(cherry picked from commit 2c0b105de7)
If the part select is too wide in both the top and bottom ends,
this patch fixes the calculation of the top pad. The compiler
was generating too much pad if the select also extended below
the expression.
If a signed signal is driving a part select in a CA and the width
is less than 32 bits. the value will be zero extended and will
not work for negative values. This patch adds a warning that this
could happen. This will be fixed in development.
This patch adds an optimization when a constant indexed part
select covers the entire L-value. It also fixes a few issues
in the code generator related to part selects.
When reading from thread space only read the first 32 bits
(sizeof int) for the part select base. This matches the other
parts of the PV_get_base() code.
In auto scopes, nets cannot work and probably are are artifact of
elaboration. So elide local nets in auto scopes.
Also, get net inputs from the inputs of nets. This is a step
towards eliminating the label on nets altogether.
We do not want to check an array word scope to see if the scope
was already included since a scope does not include array words.
They must be explicitly specified.
This patch fixes a problem in the .part/v select when the index is
undefined. The default value needs to be INT_MIN, so when the long
is cast to an int the value is in range.
To get better functionality in V0.9 and development until we
add a select that is sign aware to .part/v this patch uses
a 32 bit integer (int) for the select value. This allows a
normal Verilog integer to produce the correct results. A
warning for smaller signed index vectors is planned, but it
needs more input.
The first input through a net needs to be propagated, since this
is used as an initialization for the net. This patch also cleans
up wires to not need the width_ member, instead inferring the
width from the saved bit value.
Whether and what to propagate after a release of a part needs to
match the behavior of the full-vector release. Nets need to restore
their driver, and regs need to hold their forced value.
filters need to be able to cope with parts of vectors moving through
the net. It makes the most sense to handle every filter as a part-
selected filter.
&PV<> was just using vpi_get_value() when a signal was driving
the select. This incorrectly returned 0 for 'bx or 'bz. This
patch adds a check for an undefined value and returns INT_MIN
for this case.
This patch adds file and line number information to named events.
It also modifies the draw_eval_expr_wid() routine to fail with
an appropriate message for named events. This checking needs to
be pushed into the elaboration stage, but this will give a better
message than we had before.
This patch adds two new warning classes that can be enabled or
disabled via the -W command line option. The first controls
whether a warning is generated if a part select within an
always @* statement causes the entire vector to be added to
the implicit sensitivity list. The second controls whether a
warning is generated if a word select within an always @*
statement causes the entire array to be added to the implicit
sensitivity list. The first class is not automatically enabled
by -Wall, the second class is.
Now that .net nodes are references to filters into vvp_net_t objects
and are no longer functors on their own, the .alias node becomes
exactly the same as a .net itself.
When releasing a net, the release needs to propagate the driven
value. When releasing a variable, the driven value must be set
to the previously forced value.
IVL_LPM_CONCAT should use ivl_lpm_size() instead of ivl_lpm_selects.
This is a requirement in development so add a warning and make using
ivl_lpmp_selects() with a IVL_LPM_CONCAT fatal.
It was documented that a IVL_LPM_CONCAT would use _size() instead
of _selects(). This patch adds the functionality to _size() and
converts all the Icarus provided code generators to use _size().
_select() will be kept for compatibility in V0.9.
The old readline library was causing problem. I updated the mingw.txt
file to use the gnuwin32 version of readline (5.0-1) which works. I
also mentioned that I plan to rewrite the directions using a newer
version of MinGW.
This patch is a major rewrite of the indexed part selects (+: and -:).
It made the following enhancements:
1. Make indexed part selects work correctly with both big and little
endian vectors.
2. Add a warning flag that warns about constant out of bounds/or 'bx
indexed selects.
3. Moved the -: parameter code to its own routine.
4. Added support for straddling before part selects in a CA.
5. Added more assert(! number_is_unknown) statements.
6. Add warning for &PV<> select with a signed index signal that is
less than the width of an int. This will be fixed later.
7. Add support for loading a 'bx/'bz constant into a numeric register.
8. Add a number of signed value fixes to the compiler/code generator.
9. Major fix of draw_select_expr() in the code generator.
These opcodes need to return 'bx or 0.0 for the real opcode when
the array index is undefined.
The patch also documents the auto incrementing of the bit
index register done by the %load/avx.p opcode.
When a part select is driving another part select any bits outside the
original select must be 'bz instead of 'bx. If we initialize the temporary
buffer to 'bz this should work as required. It there are multiple drivers
then a resolver comes into play and this should not matter.
The %shiftr/i0 and %shiftl/i0 opcodes are used for some part
selects and if we have a negative shift we want the value to be
padded with 'bx. This patch enhances the two %shift/i0 opcodes
to work with negative shifts and for negative shifts pad with
'bx instead of 'b0.
It also fixes %ix/get/s to use a uint64_t instead of a unsigned
long to avoid problems with sign extension on 32 bit machines.
This patch adds support for a -Wselect-range warning class to the
driver and ivl programs. This is part of -Wall. The actual checks
will be added in a later patch.
When checking for name collisions, the compiler looks for genvar
declarations in the enclosing module rather than in the current
scope, which leads to false positives. The compiler also places
all genvar declarations in the enclosing module scope, even when
the declarations are inside a generate block which has its own
scope. This patch fixes both these faults. It also fixes some
typos and outdated information in comments.
There was a small memory leak in parm_to_defparam_list where space for
"key" and "value" was being allocated via strdup and never freed.
This was fixed by freeing them at each return point.
In that function, key and value were defined to be const char* but
were later mutated. gcc4.4 is more strict with const-ness in some
functions than previous versions (see
http://gcc.gnu.org/gcc-4.4/porting_to.html section "Strict
null-terminated sequence utilities"), so this caused compilation to
fail. Fixed by removing the const modifier in the declaration of
those two variables and related nkey variable. This also necessitated
malloc'ing room for value in one path through the code, which made
memory management easier as well.
Handle the case where the input to a net is a constant. Since nets
do not exist anymore as nodes in their own right, we need to create
a driver to drive a net from a constant.
Handle forward references of net inputs.
pr2827132 changed the val_ field in vvp_fun_part_sa to only store
the bit values for the selected part, not the entire source vector,
but omitted to modify the recv_vec4_pv method to handle this change.
This patch rectifies that omission.
This patch is based on one from "bruce <[email protected]>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
A while ago we changed how variable arrays were accessed. This change
did not get propagated to the non-blocking assignment for real array
words. This patch adds a warning that this is not currently supported.
We can add this to development, but not V0.9 (interface change).
Two small fixes: Threads should load signal values from signal_value
objects, not signal functors, and the force method should not run
its value through the filter.
This patch adds $ferror() support. This is enhanced over what the standard
says needs to be supported. All file I/O routines set/clear the errno flag,
This allows $ferror() to check when an invalid fd/MCD is passed to a
system task. The $ferror() fd is only checked if errno is not set since
all the other routines will set EBADF when they are called. This allows us
to test the output from $fopen() which sets the fd to zero (an invalid fd)
when it has a problem.
The following bugs (changes) are also fixed:
Fix $fdisplay*, $fwrite*, $fstrobe*, $fflush, $fclose to not accept 0 as
a valid MCD.
For the $fdisplay*, $fwrite* and $fstrobe tasks an invalid fd/MCD is now
a warning instead of an error like the other file I/O routines.
Modify $fputc() to be a function and return a value like $ungetc().
Modify $ungetc() to return a value like the standard dictates (-1 on
error else 0) and pass the value as a full int to get EOF as an error.
Remove some extra checks that could not happen in $fseek() and to
be safe convert the numeric codes to the system symbolic values.
Skip $fstrobe callback when the fd/MCD is closed. The standard says
we need to cancel the callback, but we currently do not have the
ability to do that so just skipping this will work for now.
Free the argument handle when $fscanf() is called with an invalid fd
(memory leak).
It's not too likely we will ever reach this, but we should be nice
and print a message instead of just failing. We could set errno,
but for now the warning will have to be enough.
Very minor issues dosify was not closing files so memory leaks could
show up and vpi/sys_readmem.c was passing the file after it was
closed to the lexor cleanup code. The lexor cleanup code does not
need an argument.
The LXT2 writer allows for splitting the output file into multiple
output files. The size of that output file was fixed, but needs to
be controlled by an environment variable.
This patch adds genvars to the elaboration process. It adds checks
that a genvar is defined for a generate loop and that a genvar does
not conflict with any other items in its name space.
Currently, edge event functors declared in automatically allocated
scopes that are used to detect edges on signals declared in static
scopes are unable to correctly determine edge information for the
first signal delta they receive because they do not know the old
state of the signal. This patch causes the state of static signals
received by these event functors to be recorded as static state in
the functors, so the old state of the signals can be initialised
to the correct value when a new automatic context is created.
Currently a part select functor will send updates to nodes connected
to its output whenever any part of its input vector changes. This
patch ensures updates are only sent when the selected part of the
input vector changes.
This patch fixes a CA to evaluate and ignore a replication of zero.
It also fixes a minor glitch in the data type calculation code. This
was causing a problem if a zero width replication was the first
element in a concatenation/replication since the data type was hard
coded to the first element of the concatenation/replication. It now
uses the first defined element in the concatenation/replication to
determine the data type.
This patch evaluates the whole concatenation expression and
makes the concatenation padding sign aware. This is needed
when $signed({...}) is passed as an argument.
A repetition is just N copies of the base expression not N
evaluations of the base expression. This is only a problem
when functions have side effects. It's also faster to copy.
The evaluation must also be done when the replication count
is zero (see 1364-2005).
When a C-style comment /* */ is being skipped because it is in a
skipped `ifdef, `ifndef, etc. directive then we need to output a
'\n' at any comment end of line.
This patch modifies the original SystemVerilog timeunit/timeprecision
patch in the following way:
Removed trailing space.
Reworked some code to use standard spacing rules.
Added some comments.
Combined some code.
Major rework of local/global timeunit/timeprecision logic.
Major rework of timeunit/timeprecision declaration/check code.
This was needed to remove the shift/reduce warnings.
Add a number of checks for invalid combinations.
Take wires out of the signals/variables and move them into a filter
instead. This is a big shift, and finally starts us on the path to
divide wires out of signals.
We want the entire force/release subsystem to only reference the
vvp_net_t or vvp_net_fil_t objects in a net. This gives us the
latitude to take wire implementations out of the vvp_net_fun classes.
Make the code smarter so it can keep fewer items in the lists.
Scopes and explicitly given variables are all that is kept.
Includes a few other refinements.
This patch adds support for dumping named events to the VCD
dumper only. The LXT and LXT2 will be added once this has
been tested more. It also reworks the $dumpvars routine
to be more consistent concerning warning messages for duplicate
signal dump requests and fixes some bugs.
For events you will get extra events at T0 and at $dumpon. I
plan to fix this, but that is much more involved.
For duplicate signal warnings. Implicit duplicates loaded
automatically from a scope will not display a warning. Only
an explicit signal request will print a warning if it was
already included. All other will be silently ignored. This
should limit the warning to only what the user cares about.
For example:
$dumpvars(0, var, scope_that_includes_var);
Will work without a warning message.
$dumpvars(0, scope_that_includes_var, var);
Will generate a warning since the var was already included
by the scope request.
Other enhancements include the start of including type
information in the output. For now integer is added, the
other type information will require changes to the code
generator and hence will only be done in development.
This was incorrectly using the expression sign not checking if
the two sub-expressions are both signed. This likely used to
work, but in the context of $signed which sets the expression
to signed so we can have a signed expression without both
sub-expressions being signed.
These methods are type specific, but the code that invokes them
get at them from pointers to filter objects, so it makes sense to
make them abstract methods of the vvp_net_fil_t class.
An implicit sensitivity list that has selects (bit, part, indexed
part or array) will include more than the user expects so print a
warning to let them know what will happen. Other simulators have
the same behavior, but I believe this is incorrect and needs to
be fixed to only include the appropriate parts. The warnings can
go when we fix this functionality, but we need them now to warn
the user that they may not be getting what they expect. One other
simulator warns for array selects.
This patch also adds the array index to the sensitivity list.
This patch fixes a number of bugs related to real variable and net
arrays. Specifically the following:
1. When iterating over (scanning) a net array start at base index 0
not index 1.
2. Don't fail when iterating over (scanning) a real variable array.
3. Run the array_word_change() routine when a real variable array
word is changed. This allows array ports and value change
callbacks to work correctly.
4. Update the array_word_change() routine to work with real variable
arrays.
5. Update the array port code to support real variable arrays.
6. find_name() needs to also iterate over net array words just like
memory array words.
7. Initialize all real array words to 0.0 when the array is created.
This patch removes some of the unneeded differences in the
various dumper routines. This is the start of a complete
refactoring, but the first task is to make them as common
as possible and this is the start of that.
When processing procedural real expressions we need to evaluate
non-real sub-expressions as bit based expressions and then
convert the result to a real value. This is particularly import
for integer division.
This patch changes the initial buffer size when displaying results
to 512 from 256. This initial buffer is used as the default for the
floating point results and failed when %f is given a large, but
valid value. To make this even more safe we add the precision to
the size to make sure we do not overflow the buffer.
This patch cleans up some unneeded code. Releases some allocated
memory before the compiler quits and fixes a couple minor memory
leaks in the compiler and vvp code generator.
Added support for the -N option, which causes $stop and ^C to behave
like $finish with an exit code of 1.
While I was at it, I noticed that the summary line in the man page for
vvp was missing a couple of options, so I fixed that.
The fd table used to be statically allocated with only 32 entries.
Three of these were preallocated for stdin, stdout and stderr
leaving only 29 for the user. This patch makes the allocation of
this table dynamic with a hard limit at 1024 total fds. The table
is increased in 32 bit chunks.
Someone got a bit too creative in reducing the original equations
I wrote to handle this. This patch reverts the previous code and
uses my original equations. This passes for both wide and narrow
vectors. The equations are slightly more complicated, but the old
z2x conversion had some overhead. I would expect the time to be
about the same, but you now get the correct results.
This patch adds code to parse and ignore the following timing checks:
$nochange 1364-1995
$skew 1364-1995
$fullskew 1364-2001
$removal 1364-2001
$timeskew 1364-2001
The other checks were already supported. These have not been tested,
but they use the same basic terms as the other checks. We can fully
test these when we actually implement them.
This patch adds -g2001-noconfig command line flag. The compiler
already supported this with `begin_keywords. Document this in
the manual page and fix a few other issues.
Fix endgenerate to be a 2001 keyword and add a few missing
keywords at the appropriate standard level e.g.(unsigned).
Add uwire and deprecate wone. wone used to just convert without
a warning to a wire. uwire will display a warning that it is
being converted to a wire without a check. wone is converted to
a uwire with a warning and then prints the uwire message. The
uwire message will be replaced with a real check fairly soon.
During macro expansion (with arguments), there is one global buffer
(exp_buf) that keeps getting reallocated to fit all the macro's text
that's currently being expanded. The problem with this scheme is that if
a macro with arguments needs to be expanded from the macro text of another
macro with arguments, it may happen that the second expansion forces
the above exp_buf buffer to be reallocated. Which is fine until the
previous macro processing resumes where (struct include_stack_t *)->str
now points to uninitialised memory. Basically, the code that can trigger
such behaviour is as follows:
`define FOO(a) (a+3)
`define BAR(b) (`FOO(b)+2)
`BAR(x)
Ofcourse, you need to get lucky to get the exp_buf to be realloced at the
right point, but it's possible.
I don't see the advantage in keeping all the expanding macro's text
together, so my solution is to simply allocate a new buffer and pass it
as (struct include_stack_t *)->str to the flex parsing function and free
it at the end.
Icarus has recognized this directive, but it did not do anything
with the information. This patch adds the functionality for most
common cases. It adds this by changing the input net type from
wire/tri to tri1 or tri0 depending on the pull. The issue is that
if the input net is not a wire or tri this is not safe and should
really be done as an external pull gate connected to the input.
We will need to handle this is it ever comes up. For now a sorry
message is printed.
Previously Icarus only supported a default net type of wire or none.
This patch adds the rest of the supported net types (all except
uwire and trireg) to the `default_nettype directive. It also fixes
make_implicit_net_() to use the default_nettype instead of always
using implicit (the same as wire).
This patch reworks the `timescale directive to do a better
job of parsing the line, it refactors some of the code and
should produce better error messages. It also tightens up
parsing the numeric constant, etc. to better match the
Verilog standard.
The parsing of `line has been enhanced to only allow 0, 1 or
2 for the level and a single line comment at the end of the
line is ignored.
The vvp_fun_force node converts its input to a call to the
force method of the target node. This eliminates the need for
linking a net to a force input of a signal.
The vvp_net_t port 2 was used to implement force behavior, but that
is no longer how we plan to implement force, so remove it from the
implementation of signal nodes. This currently breaks much of the
force/release functionality, but we'll get it back by other means.
This patch adds support for the `resetall directive.
It also changes `celldefine, `endcelldefine and `resetall
to no longer grab text following them. These directives do
not take an argument so they should not be grabbing any
text and silently discarding it.
The `timescale processing was reworked to handle being
reset and hooks were added to easily change the default
time units and precision when we add that feature request.
This patch adds real functionality for `celldefine and pushes this
property to the run time which can access this with vpiCellInstance.
This is technically only available for a module, but all scopes
have the property and only modules should return true when the
'endmodule' is between a `celldefine and `endcelldefine directive.
These are not leaks in the true sense of the word, but it is
memory that is not being freed before the program finishes
so valgrind will complain about this.
It looks pretty stupid and non-c++-y, but it does remove two compiler warnings
vvp/stop.cc: In function 'void stop_handler(int)':
vvp/stop.cc:492: warning: deprecated conversion from string constant to 'char*'
vvp/stop.cc:493: warning: deprecated conversion from string constant to 'char*'
The wire base class cannot carry all the overhead for handling all
the different net types, so split it out into derived classes. This
will also move me closer to splitting wires away from variables.
This patch modifies the real parameter get_value routine to use
the standard vpip_real_get_value() routine. This routine has
support for an integer and a decimal string value.
The standard allows an output declared as "output reg" to be
given an initialization assignment in the output declaration.
this patch adds that functionality. Specifically:
output reg out = 1'b0;
works as expected.
Icarus support returning a string version of a macro ``<MACRO>.
The problem was that it did not escape '\' or '"' so if the
macro to be escaped had either of these it would create an
invalid string. This patch fixes this by translating these two
codes to their octal equivalent when the macro is converted.
This patch fixes the three %assign/v0/x1 operators to correctly
notice that the select has fallen off the start of the vector
for the case that the negative offset equaled the width.
There is no use implementing the release and deassign methods as
port commands. It's confusing and a waste of vvp_net_t functionality.
It also obscures what needs to be done to more force/release into
the filter object.
This is moving towards moving force/release out of the signal
class. The end-game is to remove all of the wire implementation
out of the functor and into the filter. Variables will remain in
the functor.
When dumping an array word the name is implicitly converted to
an escaped identifier. If this implicit name conflicts with an
explicitly created escaped identifier this patch will print a
warning message warning that the array word will conflict with
an escaped identifier.
Move the vvp_vpi_callback to the vvp_net_sig.h header file, and
collapse some useless hierarchy. (Specifically, all callbackable
items are also wordable.)
Move the run_vpi_callback invocation for wires/variables from the
output generator to the newly implemented filter object. This is
starting to get the filter class working.
This patch adds code to automatically dump the output stream
including any dump file when entering interactive mode. When
the user typed ^C or $stop was executed.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
In 1364-2005 it is an explicit error to take the select of a scalar
or real value. We added the checks for real a while ago. This patch
adds the functionality for scalar values. In the future we may want
to push the scalar property to the run time.
This patch add code to print a warning message if it finds both a
default and `timescale based delays. The -Wall or more specifically
the -Wtimescale flag can be used to find the module with the missing
`timescale directive.
This patch adds interactive support for $stop and $finish.
$stop displays a message that the simulator is already stopped.
$finish acts exactly like (calls) the interactive "finish"
command. Having $stop do nothing and $finish not finish until
you exit interactive mode is not very intuitive.
This patch adds better error messages (compiletf) for the optional
system tasks and functions (Annex C 1364-2005). Doing this also
makes calling them fail more gracefully (it is no longer a RE).
This patch add a new system function $readmempath. It accepts
a ":" separated list of directories that $readmem{b,h} will
use when trying to open a given file. If the file given to
$readmem{b,h} starts with a '/' (an absolute path) the search
list will not be used. A new call to $readmempath will replace
the previous search list with the given list. The search list
elements are check to see if they exist and are directories.
If not a warning will be displayed and they will not be added
to the list.
the vvp_net.h header file is getting pretty huge. This divides
the obviously separable signal functor code out into its own
header and source files.
Also, fill out the use of the filter member of the vvp_net_t
object. Test the output of the vvp_net_t against the filter.
This patch adds support for recursive module loops if the
loop contains a generate block. The assumption is that the
user is doing the right thing in the generate block to make
the loop terminate. For this case there is also a check
that limits the number of loops (default 10). This prevents
the system from crashing when the user did not correctly
terminate the looping structure. The limit can be changed
by the user if needed.
When adding history (add_history) use both the existence of the
library and the header file to determine if history can be
supported. Add a new USE_HISTORY that is the and of these two.
Only sign extend the operands for division or modulus if
both of them are signed. Previously only the individual
operand signedness was being considered.
The standard does not allow this, but it appears that other
simulators do. This patch adds the functionality, but prints
a warning message for the invalid task definition.
The out pointer of a vvp_net_t object is going to be a bit more
sophisticated when we redo the handling of net signals. Take a step
towards this rework by making the pointer private and implementing
methods needed to access it.
This patch fixes the code generator to correctly create three value
constant delays. It also fixes a bug in the compiler related to the
precalculation of the high-Z delay when only two delays are given.
Previously if was using a pointer not a value comparison to find
the minimum value.
Variable delays should work when one or three values are given.
For the two value case we need to do a comparison at run time and
that will require changing the compiler/run time interface so that
can only go into the V0.10 branch. This patch can be applied to
both development and V0.9. I have added a sorry message and an
assert for this case. I will add the variable two delay case at a
later time. We also do not support mixing constant and variable
delays on a single statement. That is a much bigger change and
can wait until someone asks for it.
When a PGAssign is driven by (r-value) a bit, part or indexed
select and the strength is not the default (supply). Then
we need to create a driver (BUFZ) to convey the strength
information.
When displaying a verireal constant value force the display
of the decimal point and trailing zeros. This prevents 2.0,
etc. from being display as "2". which can be confused with
decimal two.
The previous code looked for more than one array word to determine
if the given signal was an array or not. The problem with this is
that a single word memory was considered a signal. This is fixed
here by looking for an array_dimension to be greater than zero.
This patch fixes the following problems in the right shift code.
The >>> result is only signed if the l-arg is also signed.
The r-arg is always unsigned.
Only sign extend the l-arg when the >>> operator is used.
This relates to an optimization for certain constant shifts.
Removed some obsoleted/outdated code.
When the VAMS math functions were originally built we did a
straight copy of the log() function to $log(). This can
conflict with other Verilog-D definitions of $log. We
need to deprecate this function and remove it before the
next major release.
This patch adds the $fread() system function. Icarus does not
currently allow missing arguments in functions so the following
standard specified functionality is not supported:
res = $fread(mem, fd,,count);
It also fixes a memory leak in fopen related to the get_filename
refactoring I recently did.
(cherry picked from commit 036c176e8b)
This patch adds support for virtualized register arrays to the
tgt-stub back end.
Based Cary's patch, but with a slightly different style.
Both work fine.
This was cherry-picked from the v0_9_1 branch commit:
"Get ready for the 0.9 first release"
and modified to reflect that this is now the new devel branch
headed for the future 0.10 release.
To get the correct print format for a 64 bit value it is much
better to use <inttypes.h> (when available) than building our
own value. This allows MinGW to use the non-standard I64.
(cherry picked from commit d237e35076)
It is valid to have a repetition of zero inside a concatenation
that has other elements with a defined width. This patch adds
this functionality to the synthesize method. It also prints
an error if you try to synthesize a zero width constant.
The Multiword division was not handling some degenerate high
guesses for the intermediate division result guess. The end result
was an assertion. Recover from this case.
(Does the addinb back of bp need to be optimized better?)
The arithmetic operands are signed only if both operands are signed.
If the expression is unsigned, then the expression as a whole needs
to be processed as unsigned in order to get padding right.
When a pin array is virtual, dll_target::signal() doesn't need
to make a corresponding set of stub nexa.
This patch includes new detection of oversized arrays, configurable
with the ARRAY_SIZE_LIMIT flag. This limit only applies to devirtualized
arrays; virtual arrays are only limited by your architecture's
unsigned int type.
The concept and earlier versions of this patch have been successfully
stress-tested by multiple people. This one causes no testsuite
regressions on my machine.
Closes: pr2023076
Reduces resource usage when compiling large memories.
Normal usage patterns still create large nexus arrays
in t-dll.cc:dll_target::signal().
This patch is extensively tested; it shouldn't break anything.
The existing debug "optimizer" flag is (ab)used to control
message printing when large (>1000 element) arrays are
devirtualized or nexus-ized.
The new global variable disable_virtual_pins is available
to force allocation of Pin arrays when they are declared,
but no user interface is provided.
See extensive discussion on iverilog-devel, March 4-5 2009,
title "pr2023076: large memories".
Limit memory sizes to whatever fits in unsigned; crash if
the conversion from unsigned long to unsigned overflows,
instead of just wrapping. I don't know what happens on
a 32-bit machine if you ask for an 8 Gig memory, but with
a 64-bit machine and this patch, it crashes with an assert.
Set direction on PartSelect Links before connecting them.
May or may not be considered orthogonal to upcoming
memory virtualization patches.
This patch adds messages in various places to warn that constant
user functions are not supported. It uses a global variable to
indicate when we are in a constant context. This is a bit of a
kludge, but works well without needing to change a bunch of code.
It is interesting to note that ports are elaborated late enough
that if we had the constant function evaluation code they would
evaluate correctly. This also applies to the function return
range, the concatenation repeat, specparams and initial values.
Signal definitions are early enough that elaboration is what is
failing because the function body is not available (has not been
elaborated). The same thing applies to both parameters and
localparms.
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This patch adds compiletf routines for the mti random functions
and adds a common routine to check for extra arguments. It also
adds file and line information to the rest of the compiletf
routines that were missing them.
This patch adds compilef routines for the readmemb/h and
writememb/h system tasks. It also fixes some errors related
to arrays with negative range values. You can not specify a
negative address in the file, but arrays with negative range
values or negative start/finish argument to the tasks are
supported. It also generates an error when reading invalid
character from the input file.
A significant amount of the code is common between the two
styles of tasks so this has been grouped into common
routines.
It also adds a common routine for getting a string that will
be used as a file name. This routine is used by any task
that requires a file name value. If a filename has a
non-printable character it will be displayed as a \octal
constant to show what the character is.
Updates the dumping routines to match each other better,
improves some error messages and fixes a bug in the LXT2
dumper when dumping greater than 32 bit delays.
If the builder wants to build the package with an install suffix,
the %{suff} variable makes that easy. Just define that value as
needed, and there you go.
The dependency file may be written by ivlpp as it loads its own
dependencies. Make sure this doesn't mess up the dependencies that
are already written by the main program. This requires that ivl,
ivlpp and iverilog (driver) cooperate on the opening of the
dependency file.
This is mostly a minor definition change in the parsing of literal
numbers by the vvp lexor. Allow for 64bit numbers in the .delay
records, and have the code generator also able to cope with the
situation.
Icarus Verilog internally is not white-space clean. We need to make
sure the configured paths that cause the most trouble are clean and
usable. It is still possible to mess things up downstream, but at least
this should help.
Previously Icarus normalized the results so array [7:0] would
be the same as array [0:7]. This works just fine for
simulation, but the VPI calls can select the left or right
value and this was incorrect for the [7:0] case since it was
being normalized to [0:7]. This patch swaps the two values in
the a.out file and from this creates the previous first/last
values and a new flag that can be used to get the correct
left and right values for the VPI interface.
Allows iverilog to parse attribute like syntax that a common
simuator puts into automatically generated verilog code. This
syntax cannot be found in any of the IEEE standards.
Wires are not allowed as l-values of procedural assignments, even if
the wire is an array. Fix the checker to detect this case event when
the l-value is an array.
It is possible for an identifier to have multiple index expressions.
(For example, a part select of a memory word.) Make sure all the
index expressions are probed for width and type.
And also, note that the unary ! returns BOOL or LOGIC, not just
the type of its operand. It is slightly different from the other
unary operators in that way.
The test_width for repeat-concatenations is tricky because it
requires the evaluated value for the repeat expression. It should
be OK to call elab_and_eval on that expression even during the
test_width for the containing expression. We'll see.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
This patch adds logical support for real values (!, && and ||). It
also prints an appropriate error message when a real value is
incorrectly given to an operator that does not allow real arguments
(bit-wise, reduction, shift and repeat/concatenation).
Two bugs:
(1) propagating values through the branch accidentally also
did a part select.
(2) Not all nodes of the branch nexus didn't receive a calculated
values, even though they were all marked as done.
In the process, I cleaned up the code a bit, and documented it for
better understanding.
This patch adds support for the other edges 01, 10, etc. These still
need to be verified in the context of IOPATHs, but they are ignored
in the timing checks and that's what was needed.
This patch updates the compiletf for $sdf_annotate() to better
check the arguments and to display the file and line location
when an error/warning does occur. It does the same for the
calltf messages. It also fixes a couple of subtle bugs.
First we need to look for a NULL string not a NULL value. The
result buffer should always be defined so will never be NULL.
Next if a scope has no modules we should return like the module
was not found (return 0) vs asserting.
In the past we automatically added the local directory to
the beginning of the include search path. This was found to
conflict with what other tools do so this functionality is
now only available when the -grelative-include option is
given to iverilog.
The code was using vpi_free_object() to free a vpiCallback
object and that was creating a memory leak since this is a
do nothing routine. You need to explicitly use delete.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
This patch adds code to generate process-local variables
for scopes of type IVL_SCT_BLOCK. This also handles using
the correct assignment operator (:=) for the local VHDL
variables.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
elaborate.cc:2456: warning: suggest parentheses around comparison in operand of &
vpi/vcd_priv.c:210: warning: operation on 'idx' may be undefined
Probable behavior change. Passes testsuite.
This patch cleans up the V-2005 and V-analog math functions to
free their allocated memory at the end of simulation. It also
modifies the veriusertfs code to do the same thing.
It also closes the VCD file at EOS.
This avoids generating invalid VHDL signal names in the
following cases:
- The name begins or ends with an underscore
- The name contains two consecutive underscores
- The name is the same as a component declaration
- The name differs from another only in case
This fixes a bug where temporary variables could be declared
more than once.
It also takes out a debugging print statement I accidentally
left in the last patch.
I forgot to modify the LPM generating code with the
last patch. This *should* now always ensure a signal
is readable before code is generated to read from it.
This patch corrects several bugs with the generation of
VHDL `buffer' ports. The code generator should now
generate a buffer only if the port needs to be read inside
the architecture, otherwise it will stay `out'.
This also correct a bug where an output port is connected
directly to the output of an instantiated component. Generating
`buffer's would work here, but a more idiomatic VHDL approach is
to declare an intermediate signal which both outputs are connected
to. This is implemented in the patch (fixes the regression of
readout.v in the testsuite).
If an &A() operator contains a label for an array that has not
yet been declared, vvp fails with an assertion error. This
patch delays the calls to array_find() in the functions that
compile &A() operators, using the usual resolve list mechanism.
Noticed this as part of the test case for pr2516774b. Under some
circumstances the input arguments would be cast to the wrong type.
This patch ensures that all the arguments have the correct type.
This patch changes the output of VHDL unsigned bit strings
which are 4, 8, 16, 32, or 64 bits to use VHDL hex string
constants.
So the following:
"00000001"
Becomes
X"01"
Which is much easier to read
This is a fix for pr2527366 where draw_nexus would sometimes
generate code to drive an input from in an input (where they
should have been left unconnected)
The patch for pr2516774 exposed a bug which caused
always3.1.8A to fail. This patch corrects that.
The test to decide when to use a sensitivity list
rather than an explicit wait statement wasn't tight enough.
This patch is a fix for pr2516774.
The idea is to generate a local variable inside
a function whenever an argument is assigned to. The
variable has an initial value of the argument value
and is used in its place for the remainder of the
function. This patch also handles the case where the
argument is assigned to inside a while loop.
Previously the VHDL code generator managed memory for
the AST objects by requiring that each AST element be
responsible for deleting its children. The disadvantages
of this are that it's quite easy to accidentally leak
memory by forgetting to delete a child, and no AST pointers
may be shared by multiple parents (or we'd end up with
double-deletes) -- this results in unnecessary copies of
objects being made.
There's no real need for fine-grained memory management of
AST objects since once they're allocated they tend to
persist until the code generator is about to terminate, when
they should all be freed.
This patch provides a custom new/delete operator for
vhdl_element which logs the vhdl_element objects allocated
in a std::vector (after calling the default operator new).
Once the code generator is finished a single free_all_objects
call deletes all the AST objects in one go. The custom delete
operator is required so that we can still explicitly deallocate
vhdl_element objects before the code generator completes.
There are also some allocation statistics printed at the end
when -pdebug=1 is specified.
This patch fixes some issues in the previous patch. Specifically
I need to use vpi_mcd_printf and some trickery was needed to
prevent the compiler from complaining about the format string.
Most named objects should have a vpiModule handle to get a handle
to the enclosing module. This patch adds code to get this for all
the elements that I could find that needed it.
It also adds a three more names to vpi_get_str(vpiType, ...) and
fixes a problem in the vpiLeftRange for PV signals.
For most cases just using the value of a parameter is fine, but
a vpi call can access more than the value so we want to use a
parameter reference instead of the value for vpi calls.
Strings were working correctly, integer values need some minor
code generator changes and real values needed to be pushed from
elaboration to the code generators. I also changed the default
real value comment from %g to %#g so that it is more obvious
that the value is a real value.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
Certain paths through vpi_put_value cause a vpip_put_value_event to
be created with no path for deleting in. Add the capability in the
schedule_generic method, so that it can be delete as soon as it is
executed.
This patch modifies $strobe and $fstrobe to use the string
formatting routines. It also combines the $display/$write
and $fdisplay/$fwrite routines into one and removes the
old routines that are no longer needed.
This patch fixes vvp to use the standard static result buffer
when returning the vector value of a constant string. The
previous calloc method was creating a memory leak.
With this small patch, building succeeds with Debian's current gcc-snapshot,
gcc (Debian 20090107-1) 4.4.0 20090107 (experimental) [trunk revision 143170]
That build shows no regressions in the test suite. The patch does not
break building, or show test suite regressions, with gcc-4.3.
That new gcc version still emits a pile of new and arguably bogus warnings
"dereferencing pointer '<anonymous>' does break strict-aliasing rules" for
elaborate.cc:3422
StringHeap.h:31
vvp/vvp_net.h:687 (really vvp/vvp_net.h:825)
This patch fixes some more memory leaks in vvp. Mostly related
to UDP compilation and one in find_scope() that was found when
testing the VPI code. The leak in ivlpp was that the define
temporary buffer not being freed when the lexor was finished.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
When doing right shift of unsized expressions, pad the left operand
so that the right shift does not lose. This better accounts for the
lossless expectations of unsized arguments.
Seemingly does nothing, just refactors to create two new methods:
bool NetPins::is_linked(void)
void NetNet::initialize_value_and_dir(verinum::V init_value, Link::DIR dir)
and rearranges netlist.h.
This patch causes no regression in the testsuite.
It smooths the way for any attempt to address pr2023076.
This patch makes the $fdisplay() and $fwrite() family of task
use the string formatting code. It also adds a compiletf routine
for the tasks and a run time check that the FD or MCD is correct.
If not it fails instead of just dropping the output.
It also cleans up a couple of memory leaks and adds no argument
compiletf routines for the $monitoron/$monitoroff tasks.
Verireal had hooks for this, but had an assert(0). This patch
replaces the assert(0) with assert(gn_icarus_misc_flag) and
then used fmod() to calculate the modulus. It is the callers
responsibility to verify and report a message to the user
if the current state should not support real modulus.
The STRING lexical token was malloc based, but then was passed
to routines that are expecting a new based result. This patch
standardizes on a new/delete based approach.
This patch fixes some technically benign problems found by valgrind,
but we may as well give the values a default to make sure things
work correctly. I believe that the default I choose is the
appropriate value for the context.
The other problem is that real valued (local)parameters should be
printed as a real value like a real variable, etc. Trying to
do this as a decimal with the string formatting was causing a
memory problem. I could have fixed the routine to handle this,
but the better solution was to just display things the right way.
By not creating Nexus objects until necessary, we avoid creating a
lot of spurious objects. In fact, it is true that almost every
link that is created and connected to another link will create a
spurious Nexus object without this patch.
This patch generates VHDL sensitivity lists for sequential
as well as combinatorial processes which do not contain
a wait statement. Otherwise it falls back on the original
wait-on/until behaviour.
This should make the generated VHDL more acceptable to
synthesisers.
This patch generates a sensitivity list for combinatorial
VHDL processes if they don't contain a wait statement, and
a wait-on statement if they do contain another wait statement.
This should help synthesisers correctly identifier
level-sensitive latches.
In particular this improves the code generated for flip-flops
so the output can be synthesised with certain tools (e.g. Synopsis).
See the comments above draw_synthesisable_wait for more details.
This patch does a number of things.
It adds file and line number information to the strobe_cb_info
structure. This allows the $swrite and $sformat calls to reference
their location in warning/error messages.
Their compiletf and calltf routines also display file and line
number information in messages.
The $display routine was converted to use the string formatting
routine. This can be reverted by defining USE_OLD_DISPLAY. The
old code will be removed once there has been more testing.
A number of bugs were fixed that were discovered with the
$display code.
The output of some conversions, variables and system functions
were changed to match the original display code or to better
match expectation.
Leading zero support was added to the %b/%b, %o/%O, %h/%H, %x/%X,
%c/%C and %d/%D. The floating point conversions already supported
adding a leading zero.
This is the start of converting all the various display tasks to use
the string formatting code and a cleanup/update of the sys_display.c
file in general.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
Part selects need to be fully defined. If not, then the resulting
expression is 'bx no matter what. The same for bit selects, when
the bit select expression is constant.
This reverts commit 31d67fcd3e.
The concensus has been that this causes too many build problems in
the general case and what is needed instead is a way to turn on the
extra warnings for developers only.
CFLAGS has the appropriate -W flags defined while CXXFLAGS is
just the default. The script iverilog-vpi uses CXXFLAGS because
it is defined in the Makefile to have the -W flags. This
directory is C based so does not define CXXFLAGS.
Add code to check for a plain delay statement (just a delay).
When one is found generate a null statement and do not add it
(the null statement) to result.
Functions that appear in continuous assignment expressions and that
have hidden dependencies or side effects need to be re-evaluated
whenever any input to the expression changes. This patch adds support
in the compiler and vvp runtime to enable this. This is currently
activated for any system function call that has no arguments. The
user may also force it to be used for any user function by passing
the option -gstrict-ca-eval to the compiler driver.
This patch also removes the -dautomatic option which was used for
gaining confidence in the code that supports automatic tasks and
functions. It is believed that the testsuite provides reasonable
fault coverage, and further tests can be added if bugs are found.
The code base is almost shadow-free now, so this won't add much noise to the compiles.
Problems I know about:
lxt{,2}_write.c: patch sent upstream
cflexor.c: exposes gray area of name space boundary
Finish cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in the test suite.
This is the end of the simple, coordination-free patches.
The remaining shadows are special cases that will need extra attention.
When the parameter up index was being reworked someone mistakenly
used the pointer value instead of the actual value in the MSB/LSB
comparison. This obviously could give incorrect results.
This fixes up the elaboration of binary expressions found in
parameter expressions. Parameter expressions are special because
they elaborate early, before all the other parameters are necessarily
completed.
Having our users manually edit their .git/info/exclude is
tedious and this information belongs in the code repository.
So this patch creates a file .gitignore that contains the
appropriate information to exclude all the normal files
that should never be tracked in git..
The Makefile.in was incorrectly changed and this broke compilation
on MinGW. This patch basically reverts the previous changes and
uses a few more $(srcdir) paths.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch set covers C code, with the notable exception of
vpi/lxt_write{,2}.c.
Previously only the X/Z state of the label expression was
considered to be a don't care. This patch adds that
functionality to the conditional expression as well.
This patch cleans up the Makefile.in files.
We only need to delete config.log in the lower directories.
We reference the *.in files at $(srcdir)/
We need to make distclean for the tgt-(fpga,pal,verilog) directories.
This is to cleanup the Makefile.
Add some missing "rm -r f dep"
I know we are not currently using this, but configure is building
the Makefile so it would be best if it didn't complain. This patch
adds a datarootdir target and fixes the Makefile and distclean
targets.
cadpli will not compile correctly unless it knows which DL
interface to use. This patch makes it include config.h to get
this definition. It also cleans up the Makefile.in.
This patch adds support for concatenation/repetition, signals and
part and bit select of signals for casez/x expression labels.
These along with the original constants can be mixed in almost any
order. Only constant selects are currently supported.
Specifying -pdepth=N only outputs entities that correspond
to Verilog modules found at depth < N in the hierarchy.
Setting -pdepth=0 (the default) outputs all entities.
This is for feature request 2391457
Collapse all the configure checks to a single configure script in
the root of the source tree. This makes the configure process run
a lot faster, expecially on Windows systems that are slower in general.
It is recommended that AC_CYGWIN not be used and under MinGW
the previous test was complaining about multiple calls to
AC_CANONICAL_HOST. The new test performs the same function
and also displays the MinGW status if we are compiling on
windows.
Also removed a AX_CCP_IDENT call in the vpi directory and
tgt-null is built by the top configure so there is no need
to try to run configure in that directory.
A native MinGW compile was not setting these to the correct
value. This patch makes them match what Cygwin uses. Adding
the -Wl,--enable-auto-image-base should make vvp load
slightly faster since it loads multiple DLL files.
This patch fixes the crash in MinGW make distclean. The problem
was that vpi/ and driver-vpi/ were being called twice and the
MinGW make was failing on the second call since the Makefile
was already removed.
Add a dependency on config.h and _pli_types.h in the make all
target. It is likely that only _pli_types.h was needed, but
this makes it clear that they need to be rebuilt if the .in
files change.
The lower directories that depend on the top level config.status
now have a target to rebuild the local Makefile file it the
corresponding Makefile.in changes.
We were not checking the return of the two system calls used
to get the version information from ivlpp and ivl. This patch
adds checks and prints an appropriate message if they fail.
This patch optimises away straight line sequences like:
wait for 0 ns;
wait for X ns;
to:
wait for X ns;
This tidies up the output a bit.
It also has the effect of removing all code from initial
processes where the assignments have been extracted as
VHDL signal intialisers. (c.f. pr2391337)
This prints out an error message rather than crashing out with
an assertion failure when a function assigns to a non-local
variable, which cannot be done in VHDL.
This changes the assignment statement generator so that
each VHDL declaration "knows" which type of assignment
statement can/should be used on (i.e. signals must be
assigned with <=). This will help us catch cases when
we try to use, for example, := with signals. This occurs
in pr2362211 where we try to assign to a signal within
a function (where only := can be used).
If a module's input was connected to a nexus that contained
a constant driver. That constant would be incorrectly generated
as an assignment to the input *inside* the child module (instead
of an assignment inside the instantiating module).
Remove the #ident and $Log$ strings from all the header files and
almost all of the C/C++ source files. I think it is better to get
this done all at once, then to wait for each of the files to be
touched and edited in unrelated patches.
With this small patch, building succeeds with Debian's current gcc-snapshot,
gcc (Debian 20081130-1) 4.4.0 20081130 (experimental) [trunk revision 142292]
That gcc also warns about the remaining #idents in
vvp/concat.cc
vvp/dff.h
The resulting build shows some regressions in the test suite, that
I am still investigating. The patch does not break building, or show
test suite regressions, with gcc-4.3.
This patch fixes fully out of range constant indexed part selects
to just return 'bx. It also adds support for constant undefined
base values which also just return 'bx.
A bug in the bit width calculation when building an unsized, signed
negative integer value was also fixed (-3 needs 3 bits not 2, etc.)
This patch adds the function definitions for ivl_expr_branch and
ivl_expr_nature to the ivl.def file. This is needed to get Cygwin
and MinGW to compile correctly.
Probe the widths of the case statement expressions. The expressions
are self-determined in that context, but the probe is needed to
setup the expression types.
Tran islands are a kinds of island, so seperate the tran handling
from the core island concept. This will allow for creating new
kinds of islands. (Think analog.)
The expressions of a contribution statement are real valued by
definition, but we need to do the width probing anyhow in order
to resolve types and the widths of subexpressions.
The power (**) and shift operators are different from other binary
operators because their expression width calculations rely only on
their left operand, with their right operand self-determined. Get
the handling of these operators out of the PEBinary base class to
prevent confusion.
The power operator is different in that it uses the signed version
if either of it's arguments are signed. This patch fixes the code
generator to do this correctly.
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
This test was way to picky about the widths of the arguments. In real
tests, the arguments may have different widths. This especially matter
when comparing unsized values.
Verilog generate schemes support a special case where conditional
generate schemes that contain only a nested conditional generate
scheme do not create a new scope. Instead, it relies on the nested
generate scheme to generate the scope.
unary expressions that have problems should not assert in the
test_width method. Instead, let the error propagate back and be
handled during expression elaboration. This found a few places
where expression widths/types weren't probed before elaboration.
Signals of width 1 are declared in VHDL as std_logic, as this
is the usual way to represent them. Unfortunately, we cannot
distinguish between
reg [0:0] a;
and
reg a;
This patch avoids trying to slice a std_logic so a[0] is equivalent to a.
This patch removes the CVS ident information from the Makefile.in
files it also puts in the current version 0.9.devel for the default
VERSION definition. This is normally passed down, but a local make
will use the value from the local Makefile. This will eventually be
replaced with a file based version to give us just one place to
reliably modify the version.
Move the header files from includedir/verilog to .../iverilog
because the verilog name is a little too generic. The iverilog-vpi
command should handle the changes.
This patch makes the code generator put the compiler version
information in the vvp output file. It also adds checks in vvp
to verify that this version is compatible with the run time.
I am assuming that a base release 0.9.0, etc. will have a
blank VERSION_TAG. Any change relative to the release will have
a VERSION_TAG.
The disciplines are, from the perspective of the ivl target, collected
into the design. Add functions for the target to scan the disciplines
in the design.
In the process, also clean up the handlng of design constants.
It is ot uncommon for the arguments to logical or to leave stuff
in bit registers 4-7. Allow the lor itself to take advantage of
that to save some %mov instructions.
When padding expressions, pre-allocate the target space and calculate
the sub-expression directly into the target. Then pad from there. This
saves a move into the result space.
This patch adds a -V flag to the runtime to print version information.
It also updates the manual page to document this and makes some minor
changes to the iverilog an iverilog-vpi manual pages.
Users expect that vpi_put_value() will keep a copy of the string
that is passed to it. This patch implements this buy copying the
string and then freeing it after the actual put_value call.
In some cases, it was possible for the NetEConcat expression to
lose track of the repeat expression, causing the output result to
have a broken concatenation expression.
This also adds some internal checks that the concatenation widths
add up properly.
This patch updates the GNU address in the -V output, adds the
VERSION_TAG info to the tgt-vvp back end and adds the whole -V
hook to the tgt-vhdl back end.
When padding a signal or when creating a local signal the file and
line information should be related to where the new object was
created not the signal value it is being created from.
This patch modifies the NetE* pad_to_width() routines to take a
LineInfo object to set the location to the correct value.
It fixes some set_line() calls to use the correct location.
It fixes ports to not set the file/line information if it is
already defined. Doing this was causing the definition of
signals to become the instantiation instead of the real
module declaration.
Named blocks create scopes, and generated named blocks' scopes can
have signals declared in them. So the elaborate_sig for the generate
scheme needs to call the elaborate_sig for the processes as well as
the obvious gates and tasks/functions.
Fix for pr2224949
The compiler generates a concatenation LPM to zero-pad ports when the
signal widths don't match up. However, when the VHDL generator generated
the input signals to this LPM it incorrectly sized them to be the width
of the result.
The VHDL converter erroneously treated a casez and casex exactly
the same. In reality a casez compares a 'x' value (it is not a
don't care). It also adds support for a full don't care case by
just returning True for the condition.
When the parser detects a signal type conflict, print a more useful
error message. In the process, be more careful with what line number
is actually attributed to the declaration.
In a procedural single bit non-negated reduction (&, | or ^)
we need to translate a 1'bz to a 1'bx. The easiest way to do
that is with two %inv opcodes. This patch modifies the code
generator to do this for this very special case.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Eliminate three "warning: suggest parentheses around assignment used as truth value"
Obviously not needed, but it's easier to add the superfluous parentheses
than remember that these warnings are benign.
If one of the arguments of a comparison expression has a real value, then
the expression with is 1 no matter the width of the other argument. This
means that the arguments may have different widths in this special case.
Patch is from pr2251119, suggested by Martin Whitaker.
This patch moves the checks for automatic variables being passed to
the $monitor or $strobe system tasks from the calltf routine to a
new compiletf routine. It also adds the file name and line number
of an offending call to the error message.
VHDL can't select bits from arbitrary expression so sometimes
translating IVL_EX_SELECT would fail. This is easily fixed by
replacing the select with a shift in this instance (and the
resizing)
The VVP %join function was incorrectly treating the return from a
non-automatic function as a return from an automatic function in
the case that the non-automatic function result was being used as
a parameter to an automatic function. This patch fixes this error.
A simple typo in the rhs of an expression would crash the compiler.
Example:
module crash3;
reg clk;
integer cnt1=0;
always @(posedge clk) begin
cnt1 <= (cnt==81) ? 0 : (cnt1+1);
end
endmodule
This patch addresses a number of issues:
Rewrote the $test$plusargs and $value$plusargs routines to have
better error/warning messages, to support runtime strings, to
correctly load bit based values (truncating, padding, negative
value), added support for the real formats using strtod() and
added "x/X" as an alias for "h/H" to match the other part of
Icarus.
Rewrite the vpip_{bin,oct,hex}_str_to_vec4 routines to ignore
embedded "_" characters. Add support for a negative value and
set the entire value to 'bx if an invalid digit is found. A
warning is printed for this case.
Rewrite vpip_dec_str_to_vec4 to ignore embedded "_" characters,
to support a single "x" or "z" constant and to return 'bx if an
invalid digit is found. A warning is printed for this case.
It simplifies the system task/functions error/warning messages.
It removes the signed flag for the bin and dec string conversions.
This was not being used (was always false) and the new negative
value support makes this obsolete.
Add support for a real variable to handle Bin, Oct, Dec and Hex
strings. They are converted into a vvp_vector4_t which is then
converted to a real value.
Add support for setting a bit based value using a real value.
Removed an unneeded rfp signal in vpip_make_reg()
make_safe_name now makes sure a VHDL signal is never given a
name that conflicts with any reserved words. If it does, we
just prepend VL_.
(This code was already present, but the full list of reserved
words wasn't.)
In the vvp code generator, when zero/sign extending a sub-expression,
the sub-expression is first evaluated and stored in one location in
the thread vector store, then is copied and extended into a second
location. The storage used for the initial sub-expression evaluation
is never deallocated.
The NetEBAdd::eval_tree method is able to use the associative property
of addition to reduce some constants, but it is picky about widths.
Make it a little bit more resilient to expression widths.
Even though we cannot immediately give a width for a concatenation
that has a repeat expression (the expression must be evaluated first)
we still must scan the test_width of the arguments so that they can
resolve their types.
This patch adds a number of compile and run-time checks for illegal
uses of variables declared in automatic tasks and functions. It
also adds a check for event expressions in automatic tasks that use
features not yet supported in VVP.
In the ivl_target API, the IVL_EX_BACCESS expression type gets some meat,
specifically references to the branch it accesses and the the nature to
be accessed on that branch.
This includes enough API to get the branch nexus bits and signals
and show them in the dump. This also includes creating the reference
ground for branch access functions that use the implicit ground.
This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
This patch fixes a minor memory leak in ivlpp and releases all
dynamically allocated memory before the program exits. Other than
the dynamically allocated push state buffer in flex, ivlpp has no
valgrind memory errors or warnings.
There was a memory leak in the preprocess_only code (cmd was not
being freed when the command completed successfully. Valgrind
was also marking the temporary file names as still reachable, so
they are not memory leaks, but freeing them makes valgrind happier.
The natures of disciplines were already available, this just brings
the information forward to the ivl_target.h API and exposes them via
access functions.
The goal is to completely remove the svector class because the standard
vector class works perfectly well. This removes the uses in the Module.h
header file.
Signals may have VMA disciplines attached. Make the attached discipline
visible through the ivl_target.h API. Also, re-arrange the internal
handling of the discipline structure so that we can expose disciplines
through the ivl_target C API without creating new structures. The
t-dll-api implementations of the discipline access functions can look
at the elaborated discipline structure directly. This is possible since
the discipline parse and elaboration are very simple.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. This patch set covers the tgt-vhdl
directory, and was tested by Nick.
This patch fixes some problems found when trying to dump words
from a real wire array. There are still a few more things that
look suspicious and need testing.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
The arguments of logical and/or are self determined, and the width is
fixed as 1 bit. Account for this special behavior by creating the
PEBLogic class.
The comparison operator operands are self determined, but are forced
to be the width of the wider operand. This means that the operands must
be evaluated with their widths truncated. In spite of all this, note
that comparisons expression results are 1 bit wide.
The operands of divide need to be at least the width of the expression
when calculating a constant divide. The only matters for the special
case where the result is x, because the verinum implementation of
divide will get the result width from the left expression width.
Now that NetNet objects in NetScopes are kept in a map, remove the
linked list for scanning them. This improves the lookup process from
an O(e**N) process to more like O(log(N)). This matters for very
large designs.
Get at least basic elaboration of analog processes and contribution
statements. Bring the statements and analog statements together and
net future elaboration work sort out which statements are valid in
a given context. This makes sense because there really is a lot of
syntactic overlap, and analog behavioral code is processed somewhat
sequentially.
Put together the infrastructure for elaborating analog statements,
including create the NetAnalogTop objects that hold analog statements
and are in turn held by the design.
While doing this, clean up the various unique initial/always enumerations
to use the ivl_process_type_t type.
The optimization that allowed a mux that had one input always
connected to high-Z produces code that is actually slower than
the original mux, so for now we are removing that optimization.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
The bufif devices do not correctly propagate the Z value as
required by the standard. The MOS devices do propagate a Z
value, but they do not correctly handle the case where both
inputs are Z and the select is undefined/Z. The standard
specifies that this should be X, but we produce Z. The full
MUX and %blend operator also function this way, so Icarus
may not match the standard, but it is consistent. I would
also argue that the standard is incorrect. If both inputs
are Z then the output should be Z no matter what select is.
The condition expression needs its width tested, even if the width
is not used. Also clean up some handling of widths/types for other
expression types.
This fixes the sign calculation for port padding. It also reports if
the padding will be signed or not in the warning message. The inout
calculation may not be correct. It requires both the signal and the
port to be signed, but inout is not currently padded anyway.
If a part select (either a constant or constant indexed part select)
of a L-value is fully outside the signal the part select will be
omitted after printing a warning. If a part select straddles the
upper portion of a signal a warning will be printed. The run time
will use only the appropriate part of the select. Straddling the
lower part of the signal is not currently supported and a message
is printed for this case.
The right-operand of shift expressions is self-determined, but we still
need to run a test_width to get the PExpr decorated with types and
expression widths.
A casex statement cannot be directly translated to a VHDL case
statement as VHDL does not treat the don't-care bit as special.
The solution here is to generate an if statement from the casex
which compares only the non-don't-care bit positions.
The l-value doesn't really constrain the size of unsized expressions
because there are possible sub-expressions that may pull high bits
down to the low bits. (Divide, for example.)
It is possible, via the use of the $signed() function, for concatenation
expressions to be signed. Make sure the evaluated constant had the
proper sign by checking explicitly.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch modifies the code that finds and combines similar events
such that if similar events are found in both static and automatic
scopes, the retained event will be in a static scope. This is a
performance enhancement, as VVP has more run-time overhead when
handling events declared in an automatic scope.
This code was likely never checked properly since it makes no
sense to copy the expression from the new temporary system
function. You must copy the value from the current function.
Even on 64 bit machines immediate values should be limited to
32 bits so that the a.out file will run correctly on a 32 bit
machine. This patch fixes a number of places where the code
generator was not checking for/observing this.
The signedness of comparison expressions is typically unsigned, even if
the comparison to be performed is signed. The comparison (and particularly
the expr_synth of the comparison) needs to account for this explicitly.
If either of the operands of a ternary expression are unsigned, then
both are treated as unsigned. It works just like a binary expression
in that regard.
It is up to the elaborator to sign-extend the inputs if the multiply
is signed in the Verilog source. The run time always processes the
multiply as unsigned.
The results of comparisons are unsigned, but the arguments may be signed
and the calculation performed may be signed. Handle the padding properly
for comparisons so that the math is properly signed.
When doing lossless addition to an unsized constant, we make the size
be width of an integer, only to be consistent with other tools. In fact,
don't go overboard if we don't have to.
Later passes need the intermediate results for width and size so that
some special cases, were self-determined arguments occur, can be
processed properly during elaboration. This can be especially tricky
and interesting for ternary expressions.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
This patch fixes the expression width calculation for a multiply
operation with an unsized operation. The expression width needs
to be at least the minimum of the maximum multiply result width
and the width of an integer.
Currently, a bitwise boolean operator will cause the expression
width to be reduced to the size of the result. This can give
rise to incorrect results. This patch changes the behaviour to
take into account the required precision for calculating the
two operands.
This patch removes all the checks for constant expressions performed
during the parsing phase, as these checks are (mostly) repeated during
elaboration. It adds the missing check in the elaboration phase (the
RHS of a register initialisation), and improves the error reporting
and error recovery in other checks.
This patch fixes pr2132552, which was caused by a fault in the parser
constant expression checking.
Emitting a VHDL expression like Resize("01", 32) is ambiguous
between interpreting "01" as a Signed or an Unsigned. There's
no point actually outputting this as we can sign-extend the
constant value in the code generator, which is what this
patch does.
In assignments, the expression width may be defined by the width of
operands, and not that of the l-value. Choose whichever is creater and
set (or pad) the expression to that width.
Multiply of any expression with constant 0 will always return zero.
We can handle this early, during elaboration, and save a lot of code
downstream the trouble.
Also, while we are at it, fix up test_width to re-test the left
expression width if the right expression width is unsized. This allows
for the left expression code to adapt to the unsized-ness of the
expression context.
This patch pads inputs and output ports correctly when the port
and the port expression have different widths. It does not fix
inout ports.
It also sets the file and line number information in the unsigned
pad_to_width() routine.
This patch pushes the evaluation of constant system functions into
normal elaboration vs doing them in the preliminary parameter
elaboration.
It also fixes the compiler version of clog2 to return integer_width
vs a fixed 32 bits.
There are cases where the r-value doesn't pad itself to the width
that is requested by the call to elaborate_expr. This impacts the
elaboration of PGAssign. Pad/sign extend as appropreate.
The arguments to bitwise operators are padded if *either* of the operands
is unsigned. This is according to the sign/unsigned expression rules
of Verilog, and also matches the behavior of the "Big-3."
The addition of UINT_MAX in netlist.cc requires #include <climits> when compiling with gcc-4.3.2.
I also noticed that commit 8704e3e used c style includes in c++ sources contrary to the style used in the rest of the c++ code and fixed those.
In the transition to the new expression code we forgot how to
handle the logical not (!) of a real value. This patch adds a
more appropriate error message until we get this reimplemented.
MinGW uses the GetProcAddress() function to find the address of
the vlog_startup_routines() procedure in a .vpi file. This routine
requires that the leading underscore be omitted from the name even
though the underlying routine really has one.
alloc_instance for real values was just passing a new double
to be added to the context items. The new constructor does
not set the default value so we need to do that manually.
Simple error setting the expression width of the FALSE clause of a
ternary expression when the expression is short cuirted to false.
Fix a simple error where the type of a system function is not returned
through the test_width function.
The arguments to user defined functions are self-determined. And if
the result is real valued, we can call them lossless self-determined.
Treat these arguments like r-value elaboration for assignments.
Also clean up the binary divide elaboration a little bit.
Also, floating point literals are unsized with width==1.
When a multiply expression is IVL_VT_REAL, then the default width is
the width of the operands, and not the sum of the operands. In fact, it
should turn out to be 1.
Also, the width of the multiply expression when we get to the ivl_target
API, need not be the sum of the widths of its arguments. In fact, if the
arguments are signed, that would be completely wrong. So adjust the
stub target to properly test this constraint.
Widths of real values are always 1. When paired with vectorable types
in expressions, the vectorable type is processed as losslessly self-
determined. ("unsized" in the test_width methods.)
Don't force the expression with to be different from the l-value if the
l-value is the immediate destination. This saves the effort of handling
overly wide constant values in simple cases.
Also, in determined contexts, signed unary minus does not need to pad the
width of the expression.
the PGAssign elaborate method used the test_width to get the width
of the r-value expression. This should be completely sufficient to
get the width of the expression, so always use a defined width to
elaborate the expression.
When ternary expressions are self-determined, use the test_width
method to get a proper reading of the expression width. Also improve
the test_width method to handle unsized operands.
This patch adds non-blocking event control for array words.
It also fixes a problem where the word used to put the
calculated delay for a non-blocking array assignment was
not being released. It also fixes the non-blocking array
assignments to correctly handle off the end/beginning part
selects.
Currently, parameters and localparams declared in tasks, functions,
generate blocks, and named blocks are placed in the parent module
scope. Event declarations in these scopes are not permitted (a
syntax error is reported). This patch corrects this behaviour, so
that all the above declarations are accepted and are placed in the
scope in which they are declared.
Note that the IEEE standard does not permit parameter declarations
in generate blocks. This patch causes the parser to reject such
declarations.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
When evaluating an expression into an index register bit 4 is used
to determine if the expression had any X/Z bits. In the case of a
constant immediate value this can not happen so make sure the bit
is cleared.
We need consistent pointer output (%p) and under MinGW we need to
us _snprintf instead of snprintf to get this. The recent event
control addition missed this. This has been reported to the MinGW
developers and they are working on a solution.
The previous patch (commit 8b0ca902a6)
dealing with the possibilities of (unsigned long) and (vvp_time64_t)
being either the same or different managed to redefine UL_AND_TIME64_DIFF
in the 64-bit case. This does, of course, trigger a compiler warning.
That warning is repeated on every .cc file with a #include "config.h",
which is to say, just about every file.
This patch inverts the sense of the preprocessor conditional, calling
it UL_AND_TIME64_SAME. No more warnings!
It takes a carefully crafted source file to cause elabortion to make
an arrayed multiple-output gate that is not vectorized into a single
wide gate. But that special case does need to be handled.
While the standard is not completely clear about this, we are making
it an error for a `timescale directive to be inside a (macro)module
definition. This means that all modules and any statements contained
within have a single well defined time unit and precision.
Logic gates usually have one output and several inputs, but a few
have multiple outputs and one input. Since the NetNode objects have
only a single output, handle the case by creating multiple NetNode
objects, one for each output.
A variable that is used to set the delay of a .delay statement
must be scaled to match the local units and for real values
rounded using the precision. This value is then converted to
the simulation precision.
Signals of a nexus must have types that exactly match, but the drivers
of a signal nexus have slightly more subtle rules for the case where
the signal is IVL_VT_LOGIC. Express those rules in the function
check_signal_drive_type, and use it to check the type of constants
driving a signal.
Remove redundant pointer to the containing NetPins object by keeping
the pointer only in the first Link (pin 0) of an array of links. In
this link, replace the pin number with the NetPins pointer, and set
a pins_zero_ flag to indicate that this has happened. This way, only
the first pin in a Link array will have the pointer to the NetPins
that contains the array, and the pointer takes up practically no space
at all.
This class was old, and its original design pulled literally from
the LPM reference. But of nine pins declared, only 4 were used.
Remove all the excess junk and clean up the designed dump handling
of the device.
The r-value expression takes on at least the width of the l-value. If
there is a sized width greater then the l-value width, take that on
instead. But if the r-value is unsized, there are unsized sub-expressions
that cause the expression as a whole to be unlimited width, so elaborate
and evalulate the r-value as lossless.
The true and false expression clauses must have compatible types,
which are not necesarily identical. In particular, VT_BOOL and
VT_LOGIC are compatible for the purposes of ternary arguments. The
test in NetETernary::synthesize was incorrect.
In the process, fix the type handling of NetConst objects to allow
for IVL_VT_BOOL constants. This is information that the downstream
may find useful, so should be handled correctly.
It's processed once by AC_OUTPUT in configure.in and then again
by AC_OUTPUT in tgt-vhdl/configure.in. This is a bug from when I
first started on the VHDL target, and was basing it on the tgt-vvp
code. The call to configure in the tgt-vhdl directory is not
actually necessary either, since it doesn't do any checks not
performed elsewhere, so that should proably be removed later.
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
The exponentiation operator in VHDL is not defined for numeric_std
types. We can get around this by converting the operands to integers,
performing the operation, then converting the result back to the
original type. This will work OK in simulation but certainly will not
synthesise unless the operands are constant.
However, even this does not work quite correctly. The Integer type in
VHDL is signed and usually only 32 bits, therefore any result larger
than this will overflow and raise an exception. I can't see a way
around this at the moment.
When the -V flag is passed to the iverilog command, we can easily
print the version information for the driver itself, but it is also
valuable to probe all the components that would have been used for
a real compile. So the driver executes the preprocessor and the ivl
core to have them print version information.
The ivl core program also tries to load the target code generator
and get version information to print. For this to work, create a new
optional entry point "target_query" that takes a query key string as
an argument and returns a const string as the result. Use this with
the key "version" to get version information out of the target.
Target selection is done by the DLL target code generator, so there
is no value having a layer of target selection ahead of it. Remove
all that redundant code and simplify the target config files to reflect
this.
It is possible for signe-extend to have a delay attached to it. (Same
for repeat.) Handle it like other LPM devices, by stuffing a .delay
device into the output path of the device, if appropriate.
Generate scopes were previously ignored, and this would cause a segfault
later on. This patch gives an error whenever it encounters a generate
scope. This should be removed once generate statements are implemented.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
Statements can have attributes attached to them. Handle a few cases in
the parser where attributes may be attached to statements, and get them
as far as the pform.
This patch adds blocking repeat event controls and also makes the
base repeat statement sign aware. If the argument to repeat is
negative (it must be a signed variable) then this is treated just
like an argument of 0 (there is no looping). Doing this allows us
to model the repeat event control as follows.
lhs = repeat(count) @(event) rhs;
is translated to:
begin
temp = rhs;
repeat (count) @(event);
lhs = temp;
end
This patch also pushes the non-blocking event control
information to the elaboration phase where it will report they
are not currently supported.
The generate block is a placeholder for the generate items, and it
is the items themselves that can specify the name of the generate
block that is created.
Add "include" to fix error with abort() in dup_expr.cc
Add "include" to AStatement.h so usage of struct PExpr works
Get rid of eval_tree.cc:577: warning: suggest parentheses around comparison in operand of ^
The right shift of vvp_vector2_t needs to
account for and mask off shifted bits. Otherwise
there will be unexpected results after
a vvp_vector2_t::trim method.
This patch adds the constant system functions for Verilog-2005
and Verilog-AMS. These are evaluated at compile time. $abs(),
$min() and $max() support their polymorphic behavior in the
compiler where it really matters. They are always evaluated
as reals in the run time and the result/argument(s) will be
converted as needed.
The Verilog-2005 functions are available if using the 2005
generation (default) and if either the icarus-misc (also on
by default) or verilog-ams flags are set.
The Verilog-AMS functions are available if either the
icarus-misc or verilog-ams flags are set.
If the argument to $clog2() is unsized constant, then trim it to the
smallest representation that doesn't lose the sign, then do the $clog2
on that.
Also, use integer_width instead of 32 for the minimum $clog2() result
for a negative value.
If the argument to $clog2() is unsized constant, then trim it to the
smallest representation that doesn't lose the sign, then do the $clog2
on that.
Also, use integer_width instead of 32 for the minimum $clog2() result
for a negative value.
This patch moves the always zero or possibly zero delay checks
to a point after the circuit is full elaborated. Before it
could try to check tasks that had not already been evaluated
resulting in a crash.
When looking for a delay_type() in a block stop when we have a
DEFINITE_DELAY. Doing this could reduce the number of statements
that need to be checked.
Previously only signedness was only corrected for the
result. This patch ensures the VHDL operands have the
same signedness as their Verilog counterparts.
This fixes a few of the signedX tests.
Assume that anything that is strength aware already handles a
recv_vec8_pv and make the default function convert the bits
to a vec4 and then call recv_vec4_pv with this new value.
It is legal for a task to have no definition. In that case, the
delay_type calculations (used to detect infinite loops) can assume
that an empty definition is a no-op and return NO_DELAY.
Be more sophisticated with the code generated for constant values.
When values are large, use an optimal mix of %movi and %mov
instructions to get the desired value, no matter what the content.
This splits up the monolithic and confusing vhdl_expr::cast function into
several smaller to_XXX functions which each generate code to cast an
expression to type XXX. This makes it much easier to understand and maintain.
In continuous assignment, the width of the expression needs to come
from the expression itself, and not just from the width of the l-value.
Use the PExpr::test_width method to get the width of the expression
to pass to the elaborate.
the sub_net_from function is used by the ::synthesize method of the
NetEUnary class to make the expression 0-N. By making that function
handle a real-valued net, the NetEUnary suddenly supports real-valued
nets, and this probably helps in other places as well.
When the condition expression of a ternary is constant 1 or 0, we can
short-circuit the elaboration by only processing the clause (true or
false) that we need. This saves compile time and execution time.
This patch adds an error message for the standard system
tasks and functions that are not currently implemented.
These are currently $fmonitor*, $ferror, $fread, the
queue and PLA tasks.
It is possible for the left operand of a left shift to be not known
early during elaborate expression. In that case, make a punt expression
and expect it to be resolved later.
GCC 4.3 has tightened up header dependencies so that
`strcmp' is no longer declared if <cstdlib> is included
(which it was in prior versions). This causes the changes
in 5e512e6570 to fail to
build with 4.3.
This patch includes <cstring> in the files that are failing.
The expr:::synthesize methods need not deal with saturating left or
right shifts if they are dealt with early, in elaborate_expr methods.
So the elaborate_expr for shift takes on much more responsibility.
Mostly this ensures that a recursive call to a function
is made with the correct types (this may involve generating
code to cast expressions to the correct type).
This patch pushes the automatic property for both tasks and
functions to the code generators. The vvp back end does not
currently support this so it will error out during code
generation. The VHDL back end should be able to use this
property and tgt-stub prints the property. Having this will
also make it easier when we do adding this to the runtime.
This patch adds the $clog2 system function. It also makes this
function work as a constant function. The runtime version still
needs to be updated to use an integer based version instead of
the current double based method. The double method suffers from
rounding errors.
This patch adds support for vpiScaledRealTime and vpiSuppressTime
to VPI callbacks. It also fixes a bug where the callback data
object was not being copied correctly and adds support for
vpiSuppressVal. This requires adding vpiSuppressVal to a few
other routines. It adds the ability for a callback to return
more than vpiScalarVal (all values supported by the
vpip_vec4_get_value() procedure). It also fixes a bug where
vpip_vec4_get_value() would incorrectly return vpiZ for a BIT4_X
scalar value. It also comments the potentially dangerous
vpiScalarVal calculation in the vvp_fun_signal::get_value()
procedure.
Since NetExpr::synthesize methods were rarely used, then had a lot
of bugs. Now that continuous assign uses these methods, these bugs
must be fixed.
Binary and Unary minus properly pad/extens its arguments,
Case compare generates correct code,
Divide properly takes on signed flag,
Signed right shift sign-extends its argument to prevent loss of sign bits
and uses the NetSignExtend instead of simple padding,
Use the correct target node for reduction NAND,
Properly handle constant arguments of NetESelect
Handle some exressions that were not handled before, include abs()
and POW.
In signed contextx, the right shift and unary minus expressions need
to be sign extended before they operate, otherwise there may be bad
results in the high bits in the greater context.
This patch causes a thread that is created to evaluate a function
to be executed immediately. The parent thread is resumed when the
function thread terminates.
Because Icarus tries to elaborate as much as it can even after
an error has occurred we need to check for these errors during
elaboration. This patch prevent an undefined identifier from
crashing the compiler.
When the continuous assignment is signed, then sign-extend the r-value
in the few cases where the expression is stubbornly smaller then the
desired width.
When multiply is done in native words, the conversion to words from the
vp_vector4_t vectors must be done signed. This only matters if the
input operands are different sizes (and themselves signed) but will
not hurt even if we want an unsigned result.
Logical (in)equality needs to look at all the bits of both operands,
and cannot short circuit the test unless defined bits differ. If there
are undefined bits, the equality is undefined at that point, but return
x only if there are not other bits that make the results clearly
unequal.
When nets are assigned directly to a net, we need to create a driver
to carry the strength. Normally, the implied drive of a continuous
assignment is carried by whatever gate the r-value expression ends
with, but with simble net-to-net assignment, there is no net so we
need to install a BUFZ to carry the assignment.
This is caused by using a hierarchical reference (which can't
be translated to VHDL). The result of get_decl is NULL since
the signal has been declared in a different VHDL architecture.
Adding the assert is cleaner than having it segfault, for the
moment, until a nicer error message can be added.
convert the continuous assign elaboration to use elaborate_expr
and synthesize methods instead of the elaborate_net methods of
PExpr. This exposes problems with the synthesize methods, but it
is a better way to do it.
Previously this was handled by creating an internal
signal that was connected to the output and could also
be read inside the entity. The correct solution is to
make the output `buffer' rather than `out'. However, this
does not work in the case when an output is connected to
an output of a child entity, and that values is read
in the parent. In this case *both* the outputs of the child
and the parent need to be made `buffer'.
Combinatorial UDPs will be implemented with a `with ... select'
statemetnt. However the input to this must be "locally static".
This patch joins the inputs into a vector which can be used as
the select expression.
In preparation for using the synthesize method to replace the
elaborate_net method of PExpr, rework the interface to the
synthesize() method. This changes no fnctionality, but does set
up the infrastructure for the next step.
When elaborating a parameter expression fails we need to set the
expression to 0 since it has already been partially allocated.
Doing this allows us to not evaluate the dummy expression later.
This patch adds the time and realtime properties for user
task and function arguments. It also make a common rule
for real and realtime since they are the same.
This patch fixes a bug in the VVP code generator that causes syntactically
incorrect code to be generated if an event expression contains a memory or
array port.
The list of defparams in the pform module definitions (in class Module)
should not be consumed when they are used. The module may be instantiated
moltiple times, so consuming the defparams during elaboration will cause
subsequent instantiations to not have the defparams. That's wrong.
...with the correct behavior. It would be possible to
just translate it as a regular VHDL case statement (as
it was before this patch). But the behavior is not
correct as VHDL only does the equivalent of case-equality
in case statements and this can be confusing when debugging
the output. An alternative might be to emit a warning rather
than an error.
When driving an input port to a module, watch out for the case where
the net is also driven within the instance. If this is the case, take
pains to make sure what goes on in the instance doesn't leak out
through the input port. Add a BUFZ (continuous assignment) to isolate
the context from internal driving.
The old code returns a vpiIntVal for $fscanf("%d") format strings. This
limits the maximum input range arbitrarily to 32 bit.
This patch implements %d parsing similiar to %b and %x.
'?' and 'X' chars are not accepted for %d format.
If the final statement in a process is a non-blocking
assignment then there is no point adding a `wait for 0ns'
after it since it will be immediately followed by another
wait. This case is suprisingly common, so this patch helps
generate much cleaner output without breaking the cases
where the 0ns wait is actually required (e.g. to implement
non-blocking assignment properly).
The NetBranch object is connected, but not like an object, so the
NetPins object base class is factored out from NetObj to handle the
connectivity, and the NetBranch class uses the NetPins to connect a
branch.
Also, account for the fact that nets with a discipline are by default
real-valued.
This patch adds a forward declaration for every user funciton.
This fixes VHDL compile problems if a function calls another
before it has been declared.
Multiple lvals are implemented by first assigning the complete
RHS to a temporary, and then assigning each lval in turn as
bit-selects of the temporary
Previously the code generator expanded ternary assignments to
and `if' statement. This patch replaces that with a single assignment
and a call to a Ternary_* support function. This will make it
much easier to support multiple lvals later.
The double to vvp_vector4_t constructor was not using the correct
declaration for the bit words. This worked as long as unsigned and
unsigned long were the same size (usually).
Detect function call expressions that turn out to be calls to the
access function of a nature. Elaborate the access function and stub
the emit code. This gets the access function just short of the code
generator.
The preprocessor was incorrectly setting the line when starting
an include file to the line it was called from instead of 1.
This would give incorrect line numbers for errors/warnings in
the included file.
The new real to int conversion was incorrectly setting the
bits for minus infinity to all ones. This is incorrect in a
two's complement encoding where the largest negative number
would be a leading 1 followed by an infinite number of zeros.
This patch updates the %cvt/vr command to use the new double to vector
constructor. This allows the resulting bit pattern to be larger than
a long. The old method was producing incorrect results without a
warning for large bit values.
This patch makes .part/pv strength aware, resolv vec8_pv
aware. vvp_net_fun_t adds vec8_pv as a virtual function
with an appropriate error default. vvp_fun_signal should
full support vec8_pv (not tested and may not be needed).
This patch fixes a bug where a local parameter with only a range
was incorrectly setting the default parameter type to IVL_VT_NO_TYPE.
This would create a compile time assert for any untyped
parameter/localparam immediately following it.
Contribution statements have an l-value and r-value. Parse those
expressions into pform so that elaboration has something to work with.
In this process, this patch also changes the PECallFunction class to
use the vector template instead of the svector template. The latter
doesn't add anything over the STL vector template, so this is a start
of working the svector out.
Whilst adding `wait until ...' at the end of every
process is a valid translation of the input, it is not
actually synthesisable in at least one commercial
synthesiser (XST). According to the XST manual the
correct template is to use `wait until ...' at the
start of sequential processes and `wait on ...'
(equivalent to `wait until ...' with 'Event on all
the signals) at the end of combinatorial processes.
This patch implements that.
Initial processes set a magic flag in the code generator
which allows it to push constant assignments into the
VHDL signal initialisation and omit the assignment.
However, it should only do this if the signal has not
already been read (otherwise the previous read would
not get the undefined value as expected)
If the Verilog source contained a continuous assignment
of a constant to an output, it would not be present in
the VHDL output. This patch generates a VHDL continous
assignment in these cases.
If output P of A is connected to output Q of B (and A is
instantiated inside B) then VHDL does not allow B to read
the value of Q (also P), but Verilog does. To get around
this the output Q is mapped to P_Sig which is then connected
to P, this allows B to read the value of P/Q via P_Sig.
Previously the code generator tried to infer the VHDL types. Now it
takes a much more dumb approach and forces the VHDL type to be
the same as the ivl type (derived from ivl_expr_signed and
ivl_expr_width) in the expression tree. This works much better :-)
The signed/unsigned-ness of an expression needs to be
preserved over any call to Resize. Also add a sanity
check to make sure non-vector types are not resized.
Verilog_Case_Ex is used as a temporary to store the result of
any non-static case expression. This fixes a bug where it would
be declared multiple times if there were multiple case statements
in a block.
When generate schems and instance arrays are nested, it takes
multiple iterations of elaborate scope, defparams and evaluate
parameters before everything is worked out. Rework the work item
processing so that the loop elaborates scopes and runs defparams
in phases. The phases are needed so that we can tell when the
remaining defparams are orphaned.
Modules mentioned within generate schemes are not candidates for
defaults guesses at root modules. They are, obviously, used within
the generate schem.
We must run generate schemes after running defparams because the
defparams may define the results of the generate schemes. So put
the generate schemes for a module scope into elaborator work items.
The l-value of a defparam assignment is a hierarchical name that may
include array selects to select scopes from module arrays. Therefore
it makes no sense to store parsed defparams in a map. Instead, they
should go into an ordered list. This also maked more sense because later
defparams *may* have the same name as a previous defparam, and will
override the previous defparam. So replace the map of parsed defparams
with a list of parsed defparams.
Also, as soon as the defparam expression is elaborated, the list entry
is no longer needed, so delete it. Save memory.
It is possible for defparams to not find their target the first time
around, because the elaboration of the target scope is not yet done.
So retry the defparams once for each scope by putting it on a work
item in the elaborator_work_items list.
The file and line number information needs to be copied when
doing a macro expansion. This prevents a macro that expands to
an `ifdef of other construct that needs to push the stack
from core dumping.
When we detect that a module instance is an array of instances, delay
the elaboration of the array until after the first defparam processing
is complete. This allows for defparam statements to control the
instantiation of module instance arrays.
Putting scope elaboration into work queue items allows for handling
more complex processing order. The elaboration_work_list queue drives
the processing of elaborate_scope and parameter evaluation.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
Within generate schemes it is possible to have nested scopes, even
more liberally then outside generate blocks. So see to it that the
scopes properly stack with the generate blocks, and that wires and
behaviors are put in the right scopes.
Generating task/function definitions involves getting the functions
to put themselves into the generate scheme instead of the module,
and getting elaboration to elaborate those definitions in the
generate scheme.
Verilog-2001 only allows a single generate item within a generate-
endgenerate region, but allowed one to collect generate schemes with
begin/end blocks. Verilog-2005 cleaned up that mess, and it is the
2005 syntax that Icarus Verilog implements. This patch detects the
anachronistic use of begin/end within the generate region, ignores
the begin/end words, and prints a warning that the user is using an
obsolete syntax.
Named begin/end blocks burried within generate schemes need to be
elaborated. Handle this by remembering to elaborate_scope on the
statements within the generate scheme.
In the process, clean up/regularize some of the member names and
methods.
This handles the general case of a non-real operand to a real-valued
division. This can turn up if only 1 operand of a divide is real. In
this case the division as a whole is real and the other operand must
be cast to real.
This method creates an extra node, but it should be a very compact
node and this node does no evaluation tricks so in the run time should
be no more expensive then folding the cast into the .arith/div.r itself.
This patch adds checks that $fopen is only called with a valid
mode argument. It also checks that the file name for $fopen{a,r,w}?
is a valid looking file name (all characters satisfy isprint()).
The later should prevent creating weird file names because of
Verilog bugs.
This patch changes the base oct to string converter to correctly
pad the top digit. x or xx should display as a single lower case
x when they are located in the top bits. Before these were being
interpreted as 00x or 0xx and displayed X. Also modified the hex
conversion to use this same scheme instead of a loop.
First, handle the trivial (but possibly common) resolution cases in
inlined code, and only call the complete function for the complicated
cases. Then clean up the complex function for readability, and account
for the constraints that the front-end function established.
Arrays of vvp_vector4_t values redundantly store some fields in every
word. Create a special type that stores vvp_vector4_t values in a form
that does not duplicate the width of all the items. This can save a lot
of space when big memories are simulated.
The schedule_assign_plucked_vector is a better way to implement the
schedule_assign_vector, or at least no worse, so remove the now
redundent schedule_assign_vector.
It is legal (though worthy of a warning, I think) for the part select
of an l-value to me out of bounds, so replace the error message with
a warning, and generate the appropriate code. In the process, clean
up some of the code for signal l-values to divide out the various kinds
of processing that can be done. This cleans things up a bit.
This is a major rework on the sys_fileio routines. They now have
improved compiletf routines and the calltf routines are now
standardized. Along the way a few bug were fixed as well. Some
updates to other vpi files as well.
I changed the order of the $fputc() arguments to match C and the
rest of the system functions like it ($fungetc, etc.). I recently
fixed $fungetc() so I'm assuming the $fputc() needs the same fix.
It's an Icarus specific function.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The functor_ref_lookup() function fills its argument in with the
vvp_net_t* pointer that matches the var name, so there is no need
to create the vvp_net_t object before then.
The vpiIndex is really just a different view into the same object,
so implement the trickery needed to support a vpiIndex with the
absolute minimum memory cost.
The %load/vp0 instruction adds a signed value to the signal value being
loaded, but it doesn't allow for a signed source vector. Add the
%load/vp0/s instruction that pads the loaded vector, and add the code
generator details to properly use it.
The vvp_net_fun_t objects, and derived objects, are small, and are
created in large quantities. Tightly pack them into permanently
allocated space in order to save on system allocation overhead, and
thus save overall on memory.
Actually, the immediate value handling is a little chaotic and should
be cleaned up. This patch opens the door for allowing signed immediate
values, and uses them in a few places where they are explicitly handled.
We must go through the opcodes that can take immediate values and make
explicit whether they are signed/unsigned/etc, and what their size
limits are.
Part select of an entire signal returns just the NetESignal itself,
but since part selects are always unsigned, even if the selected
signal is signed, we need to cast the NetESignal to unsigned first.
The part select of a vector is converted by the compiler during
elaboration to a 0-based canonical address. But since it is legal
to address bits below the LSB, the canonical address can be negative.
So make the part select base for selecting from signals work with
signed arithmetic and make the code generator generate negative
indices when needed.
Scheduler cells are small objects that come and go in great quantities.
Even though they are allocated and deallocated a lot, they tend to a
steady state quantity, so put together a heap that is unique for each
cell type.
This heap actually saves memory overall because cells are allocated in
chunks, thus eliminating allocator overhead, and they are pulled/pushed
from/to a heap very quickly so that what overhead remains is slight and
bounded.
The vvp_net_t objects are never deleted, so overload the new operator
to do a more space efficient permanent allocation.
The %assign/v instruction copied the vvp_vector4_t object needlessly
on its way to the scheduler. Eliminate that duplication.(cherry picked from commit d0f303463d)
The vvp_vector8_t constructor and destructor involve memory allocation
so it is best to pass these objects by reference as much as possible.
Also have the islands take more care not to perform resolution if the
inputs aren't really different.
NOTE: This is a port of commit 2f4e5bf5b6
from the "performance" branch, without the resolver scheduling changes.
This was causing test suite variances with pr1820472.v. It looks like
there might be a race in that program anyhow, but for now leave out the
resolver scheduling changes so that the rest of this commit can go in.
The __vpiPV objects express themselves as vpiPartSelect objects.
Add support for value change callbacks by attaching the callback
to the signal that we part select from.
This patch adds the time and realtime types to parameters
and local parameters. It also makes the width (range) of
an integer parameter match the variable "integer_width"
(normally 32 bits). It also converts a real value to
an integer when a range is implicitly or explicitly
given. This all matches what the standard specifies.
Fixed an error in converting -1 to a unsized verinum.
The %load/v instruction was doing some spurious resizes of the vector
that comes from the signal. Eliminate those resizes that can be
removed, and optimize some that remain.
When parameters are replaced, the expression that is replaced is deleted
so make sure the pointer in the map is properly updated. Also, make sure
the defparam expression itself is not deleted because it is used to
print messages, such as design dumps.
This is not a solution to all the problems, but is a better catch-all
then what is currently there. Allow the index field to be a T<> that
accesses the thread to get the address index.
Note that the lexor.lex currently returns the T<> as a T_SYMBOL, and the
users of T_SYMBOL objects need to interpret the meaning. This is
probably not the best idea, in light of all the other *<> formats that
now exist.
Part select of parameter names is fixed up to be structurally similar
to part select of signals, and also to behave similarly. (Though not
identically, for reason.)
Part selects to signals are allowed to be off the ends of the signal
itself. The bits that are beyond the vector return X. This may mean
creating constant X bits on one or both ends of the result.
This patch cleans up some of the code to use common compiletf
routines where appropriate. It also adds code to print the
number of extra arguments and cleans up the messages a bit.
Parameter value ranges support the exclude of a point as well as
range, so add the syntax to support that case. Internally it is
handled as a degenerate range, but the parse and initial elaboration
need to know about it.
If a memory word was accessed before it was defined the
code was returning a zero width vector result. Now it
returns an appropriately sized vector of 'x'.
The memory opcodes %assign/mv, %load/mv and %set/mv
were removed by a previous patch. This one removes
the documentation from opcodes.txt. It also removes
the documentation for the .mem* statements for the
same reason.
Recursive branch resolution was scanning every branch end, even though
many branch ends share ports and need not be repeatedly scanned. Handle
marks and flags to cut off recursion where it is not needed so as to
save much run time.
Conflicts:
tgt-vvp/vvp_scope.c
Note that the draw_net_input.c takes in a lot of the codes that used
to be in vvp_scope.c, so some changes may have been lost.
This patch cleans up the dump routines and adds file and
line number information for errors. It also adds some of
the missing MemoryWord properties so they can now be
dumped and monitored correctly.
This patch adds $simparam and $simparam$str from Verilog-A.
The analog simulator parameters return 0.0 or N/A. The
vvp_cpu_wordsize system function has been moved into the
$simparam call and is now named CPUWordSize.
This patch also starts the factoring of common code in the
vpi directory. Some routines were renamed.
The priv.c file was renamed to sys_priv.c to match the
include file.
System functions can now have strings put to their output.
Rather then join islands while branches are initially created, save the
island creating for the end. This way, the process is actually recursive
and greedy, reliably collecting branches into islands without conflict.
Fold the bi-directional part select into the pass switch (tran) support
so that it can be really bi-directional. This involves adding a new
tranvp device that does part select in tran islands, and reworking the
tran island resolution to handle non-identical nodes. This will be needed
for resistive tran devices anyhow.
The draw_net_input function is modified to account for nexus that is
a port of an island. Draw the ports (and the islands if necessary)
to the island and use the port output for the nexus instead of the
port input. This allows the bi-directional behavior of the port to
interpose itself in the data flow.
In this process of these changes, the draw_net_input function was
reorganized, and all the considerable amount of code for it was
moved to a file of its own. (vvp_scope.c is pretty unruly.)
NetTran devices must be collected into islands because they are all
a bi-directional mass. This is how vvp will process them and the code
generator will need a head start organizing them.
The vvp_island classes are added, as well as support for tranif nodes
that use this concept. The result is a working implementation for
tranif0 and tranif1.
In the process, the symbol table functions were cleaned up and made
into templates for better type safety, and the vvp_net_ptr_t was
generalized so that it can be used by the branches in the island
implementation.
Also fix up the array handling to use the better symbol table support,
and to remember to clear its own table when linking is done.
The code generator was reading the wrong node of a bi-directional
part select. This happens exclusively with part selects passed to
bi-directional ports, so was rare. The result was that the non-part
selected part may get an incorrect value.
The multiply runs does not need to do all the combinations of digit
products, because the higher ones cannot add into the result. Fix the
iteration to limit the scan.
ivl_switch_scope, ivl_switch_attr_cnt and ivl_switch_attr_val
are non-existent routines and should not be in ivl.def. I also
removed them from ivl_target.h. Cygwin expects that if a routine
is listed in ivl.def that it will find a real implementation.
My previous patch always used an empty file if git was not
available. This patch extends this to use the existing
version.h file if it exists (snapshot, etc.)
The handling of immediate add used to do 16bits at a time. When it went
up to 32bits, the need to work in chunks vanished, but the chunk handling
was still there, this time shifting by 32, which causes problems on 32bit
machines. Simplify the %addi handling to avoid this.
Clarify that operands are typically 32bits, and have the code generator
make better use of this.
Also improve the %movi implementation to work well with marger vectors.
Add the %andi instruction to use immediate operands.
Use high radix long division to take advantage of the divide hardware
of the host computer. It looks brute force at first glance, but since
it is using the optimized arithmetic of the host processor, it is much
faster then implementing "fast" algorithms the hard way.
This instruction adds an integer value to the value being loaded. This
optimization uses subarrays instead of the += operator. This is faster
because the value is best loaded into the vector as a subarray anyhow.
The AND and OR operators for vvp_bit4_t are slightly tweaked to be
lighter and inlinable.
The vvp_vector4_t::set_bit is optimized to do less silly mask fiddling.
This involves defining the API for switches and cleaning up the
elaborated form to match the defined ivl_target API. Also add t-dll
code to support the ivl_switch_t functions, and add stub code that
checks the results.
When processing wide vectors of these operations, it pays to process
them as vectors. This improves run-time performance. Have the run time
select vectorized or not based on the vector width.
Improve vvp_vector4_t methods copy_bits and the part selecting constructor
to make better use of vector words. Eliminate bit-by-bit processing by
these methods to take advantage of host processor words.
Improve vthread_bits_to_vector to use these improved methods and Update
the %load/av and %set/v instructions to take advantage of these changes.
The MinGW system() implementation appears to return the straight
return value instead of the waitpid() like result that more
normal systems return. Because of this just return the system()
result without processing for MinGW compilations.
Older version of the MinGW runtime (pre 3.14) just used the
underlying vsnprintf(). Which has some problems. The 3.14 version
has some nice improvements, but it has a sever bug when processing
"%*.*f", -1, -1, <some_real_value>. Because of this we need to use
the underlying version without the enhancements for now.
snprintf prints %p differently than the other printf routines
so use _snprintf to get consistent results.
Only build the PDF files if both man and ps2pdf exist.
MinGW does not know about the z modifier for %d, %u, etc.
Add some missing Makefile check targets.
These instructions can take advantage of the much optimized
vector_to_array function to do their arithmetic work quickly and
punt on X very quickly if needed. This helps some benchmarks.
If the select of a MUXZ is constant 0 or 1, then we can elide the MUX
in place of a simple BUFZ. This should allow the dead code on the
unused side to be removed as well.
Functions like $monitor need to attach callbacks to array words if
those words are to be monitored. Have the array hold all the callbacks
for words in the array, under the assumption that the monitored words
are sparse.
Array words don't have a vpiHandle with a label, so the %vpi_call
needs a special syntac for arguments that reference array words.
This syntax creates an array word reference that persists and can
be used at a VPI object by system tasks.
Memory words may have part selects assigned, but the code messed up
the testing for the validity of the part select base. This fixes do
detect constant bases so that base validity tests are handled at
compile time.
The tran devices include tran, rtran, tranif0/1 and rtranif0/1. These
are all elaborated as options on a NetTran device. It is still not
clear the best way to present tran devices via the ivl_target.h API.
Add include statements (<cstdlib> for abort()) and a cast.
Necessary and sufficient for successful compilation with
gcc-4.3 (Debian 4.3.0-4) 4.3.1 20080501 (prerelease)
The draw_input_from_net function was being used to access words of
a var array, which doesn't work. Have the draw_input_from_net punt
on that case, and by the way the mux inputs don't need to use that
function, instead they should use the general draw_net_input function
to get the input labels.
It is possible for an array to have 1 word in it, so using the array
count to detect an array is incorrect. Use the ivl_signal_dimensions
function, which is there exactly for that purpose.
Before this, the types of parameters were always logic, only the
width and signed-ness could be controlled. A parameter may take
on implicit real values if the expression were real.
With this patch, the type for the parameter can be explicitly set
to logic or real. This also means that the parameter real valued
expressions need to be more crefully treated, possibly with casting
integral expressions to real values, or real expressions to integral
values.
It is possible for the code generator to create .array/port objects
before the .array object that the port refereces, so use the resolv_list
to arrange for binding during cleanup.
Save tons of space per memory word by not creating a vpi handle for
each and every word of a variable array. (Net arrays still get a
vpiHandle for every word.) The consequence of this is that all
accesses to a variable array need to go through the indexing.
This commit handles the most common places where this impacts, but
there are still problems.
vpi_handle_by_name() was assuming it was always given a valid scope
object. In the context of vpi_chk_error() this is not required and
some users use/abuse the interface by calling the function with invalid
objects expecting a 0 return value. This patch adds an explicit check
for the supported types vpiScope and as an extension vpiModule.
Anything else should be flagged as an error once we have vpi_chk_error()
implemented, but for now it just returns 0.
The arguments to $ungetc() were backwards! This patch fixes that
and adds a bit more checking to the compile_tf routine. It still
needs more work, but that can wait for the major system function
clean up I have planned when I can find the time.
It is a quirk of the $signed() system function that the argument
is converted to signed, but the operation that is performed is
not changed. So arithmetic operators on unsigned arguments inside
a $signed() expression still perform unsigned arithmetic.
The pform is now translated/elaborated into NetScope objects. All that
remains is to check the parameter values against the ranges. This is
to be done in the evaluate_parameters() method.
A recent change to sb_to_idx() made it return a signed value
where it previously returned an unsigned value. This patch adds
explicit casts to remove the two signed vs unsigned comparison
warning messages.
Handle parameter value ranges as far as the pform. The +-inf expressions
are not handled yet, nor is the single value exclude, but the other
cases are handled.
The VAMS-2.2 LRM syntax does not include a semicolon after the nature/
discipline name, but the 2.3 LRM does. Effectively, that means that
the simicolon is option from now on.
Fix
elab_expr.cc:1561: warning: comparison between signed and unsigned integer expressions
caused by revised prototype of NetNet::sb_to_idx() in
commit dfb7bf5211
Pform parse enough of the natures that they can be mapped and the
disciplines can bind to them. Since Verilog-AMS expects natures to
be declared before use, we can do the binding early.
The VAMS-2.3 specification says that discipline and nature declarations
have a semi-colon after the identifier, but the disciplines.vams in
the appendix does not. Initial guess what that the disciplines.vams
is correct, but I've been told that the syntax is correct and the
disciplines.vams file is not.
Parse discipline declarations, net discipline declarations, and
analog contribution statements. Don't yet do anything useful with
these, just give a sorry message where they are encountered.
This is part of the standard disciplines header file, with enough
syntax to part the natures and disciplines included. Don't do anything
with the parse results yet.
The Verilog LRM specifies that it is legal to give constant part
selects that are beyond the bounds of the identifier being selected.
But elaboration was flagging that as an error. This patch changes it
to a warning, and handles the cases by generating 'bx bits as needed.
The elaborator improperly allowed user function call nodes to take on
the expression width requested of them. The result was that generated
code had junk pad bits in certain cases.
When calculating 0^z with constant arguments, make sure the result is
x. This problem only happens when the arguments are constants and the
expression is calculated at compile time.
Verilog does not allow macro expansion in strings, and that's that.
But sometimes people want strings of a macro expansion, so add a
stringify syntax that does the trick.
Verilog-AMS supports scaled real numbers, where the "e<N>" (scientific
notation) is replaced with engineering scales from "a" (atto-) to
m (milli-) and "K" (kilo-) to "T" (tera-). This syntax can be handled
way down in the lexor.
IEEE1364 has specific names for the various generations of Verilog that
are supported. Icarus Verilog should stick to those names for selection
the language feature set.
In the process, the extensions that were tied to the 2x generations
are pulled out out and given their own enable flags. The makes all the
feature control more regular and understandable.
This patch adds a new system function $vvp_cpu_wordsize. It returns
the size of the underlying CPU word (long) in bits. This function
can be used to write fully portable tests for the test suite. Other
functions will be added as needed.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
Fix when sign extending an expression that the result is also signed.
This bug caused some arithmetic operations (with extended arguments)
to not notice that they are signed.
Also be more robust in noticing that comparisons are signed and should
generate the right code.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
In continuous assign expressions, the abs() operator can't easily be
burried in generic unary handling, so add the IVL_LPM_ABS type and
generate it as needed.
The va_math module implements functions that are optional in base
Verilog but included in Verilog-AMS. So automatically include the
module if -gverilog-ams is given.
The va_math module implements functions that are optional in base
Verilog but included in Verilog-AMS. So automatically include the
module if -gverilog-ams is given.
Implement in behavioral the abs/min/max operators for real values.
The parser treats these builtin functions as operators, unary or
binary, and elaborates them appropriately.
Also add enough code generator support to handle real valued expressions
in thread context.
Verilog-2005 defines the base-10 log function to be $log10. This makes
sense because in C the log() function is the natural log. So add the
$log10 function.
Since there may be legacy code that uses the $log function, leave it
defined, but we should consider at least printing a warning when the
$log function is used.
Verilog-AMS recommends that users use the system-function style
math functions, but supports traditional style math functions for
portability. Add the keywords and parse the traditional Verilog-A
functions, and handle them as calls to the equivilent system
function.
Add the -gverilog-ams flag to the driver, and the begin_keywords support
for VAMS-2.3 keywords. With this, the infrastructure is in place to
start pulling in features from Verilog-AMS.
The begin_keywords directives manage a mask of keyword sets that are
active at a given moment. This patch makes the lexor actually test
the given keyword against the mask. If it matches, return the keyword
id, if it is disabled then it is an IDENTIFIER.
Package builders/managers find the DESTDIR variable convenient for
installing into a temporary target for building a package. This adds
the DESTDIR varilable to the root makefile.
Also, clean up the verilog.spec file to reduce redundancy so that
maintence for releases is easier.
1364-2001 does not allow a replication count of zero, but
1364-2005 allows them when the replication is enclosed in
a concatenation with other valid bits. This patch adds
code to perform these checks for procedural expressions.
Because of the NetNet object must have a width greater
than zero a replication used in a continuous assignment
can never have a count of zero.
This patch makes sure that objects either support vpiFile
and vpiLineNo or adds dummy code so that a runtime error
will not occur when accessing these properties. It also
returns 1 for the size of real variables and adds a
simplified vpiIndex that matches the Memory interface.
The begin_keywords directive allows the source code to select keyword
subsets so that a bit of code that uses identifiers that class with a
newer version of the standard can still be compiled.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
The va_math.vpi module implements systen-function versions of the
Verilog-A math functions. This library was contributed by Cary R.
Also add the constants.vams include file. This is pretty much
direct from the Verilog-AMS LRM.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
This patch does a better job of recovering from an error in a
task or function definition. This prevents the compiler from
printing many irrelevant error messages.
This patch adds the functionality to tasks/functions to handle the
declaration of multiple ports using a single ANSI declaration. It
also deletes the old range vector before it adds the new one. The
tasks and functions are different than modules so we need to copy
the range for them.
Several places in Icarus Verilog try to get the bits of the integer
part of a double by casting to unsigned or unsigned long. But that
causes some compilers to generate smart code that converts all values
less then 0 to 0, even though we are after the bits, not the math
value. So be careful to do this cast only to non-negative values and
uminus the bits if necessary to get exactly what we want.
Signed-off-by: Stephen Williams <[email protected]>
Fix handling of cases where multiple specified delays are activated
for a given output. Need to apply the standard selection criteria
that gets the minimum value.
The %sub instruction didn't have the efficent implementation that
the %add instructions used. Update subtraction to use the array
method, so that it gets the same performance benefits.
The vvp_vector4_t often receives the results of vector arithmetic.
Add an optimized method for setting that data into the vector. Take
into account that arithmetic results have no X/Z bits, etc.
Logical and/or take as inputs condition expressions, which are scalar
expressions. Be sure to reduce vectors using proper logic to get the
right condition value.
This patch adds check to determine if an always block has delay
in it or not. If there is no delay a runtime infinite loop will
occur. For the indeterminate case it will print a warning message
if the new -Winfloop flag is given. This flag is not part of the
-Wall check!
When generating a real expression you can have bits of the
expression that use vector only operands. When this happens
evaluate that part of the expression as a vector and then
convert it to a real value.
On some systems, 1UL<<X will make a mess if X is the size of
an unsigned long. This especially seems to be a problem on i386
systems. Protect those shifts in the vvp_net.cc.
When left-shifting unsized constants in self-determined contexts, the
constant value is normally pared down to its minimum required width.
But this practically guarantees loss of bits. Instead, detect this
special case and give the unsized constant a width of an integer.
Still allow for the super-special case that the shifted value and the
shift amount are constants. In that case, the result width (and value)
can be calculated precisely and there is no need to resort to default
widths.
This patch uses the true delay expression count not the truncated
one to check that the number of delay expressions is correct.
It also prints the actual number of expressions it found when
printing the error message.
By slightly altering the vvp_bit4_t encoding, a few simple
optimizations become possible. By making Z==2 and X==3, the
conversion from X/Z to X is a simple shift-or, and this can
be used to reduce the size of some of the bit4 operators.
In previous incarnations of the vvp runtime, bit vectors were passed
around as arrays of unsigned char that charried bit4 vectors. That
is no longer used. Remove the last vestiges of that dead code.
Remove dependencies on vvp_bit4_encoding outside of the vvp_net
core types. The table_functor_s class was the worst offfender and
was barely used, so it is now removed completely. There are a few
opcodes in vhtread.cc that also make vvvp_bit4_t encoding
assumptions (and used casts) and those have been fixed. There
were also various VPI interface functions that are fixed.
The vvp_vector4_t holds 4-value logic. This patch changes the encoding
of 4-value bits in the vector to use separate A- and B bit vectors,
with the B- vector signaling the A- bits that are not 0/1. This
allows rapid conversion to 2-value logic, and rapid tests for X
and Z values.
Update the rules for parsing user function definitions to allow
Verilog-2001 ANSI style port declarations. In the process, also
unify with the user task port declaration so that the types don't
diverge. The rules are the same for both, with the extra constraint
that function ports must all be input. This latter rule is checked
later, during elaboration, so that the task/function pform code
can be shared, and better error messages can be generated.
This patch fixes deassign to allow it to unlink from a driver.
It also zeros the cassign_link and force_link pointers after
they have been unlinked. Not doing this will cause an assert
if deassign/release are called multiple times (variable only).
commonly, the make install is run in a compiled directory by a
different user (i.e. an administrator) that doesn't necessarily
have write access to the build directory. This patch fixes it so
that the test that the version.h is up to date doesn't need to
write a temporary file in the build directory.
It also makes sure that if there is a real need to update the
verion.h, and it is not writable, then properly fail the build.
Passing preprocessor definitions forward into library cells was broken
by this bug in processing the precompiled macro values that were written
by the main preprocessor.
Detect thread bit allocation failures and fail gracefully. Print an
error message that points at the expression in question, and return
with an error code so that the compiler exits with an error.
When constant values are added to get another constant value, and the
expression is not otherwise a fixed size, then trim the result to
prevent unbounded expansion of unsized expression with.
In the process, find and fix a bug in the vtrim function that caused
an assert if trimming were not possible for an unsigned value.
This patch fixes the elaboration of parameters in a continuous
assignment to only pad the constants to their defined width.
Previously they were padded to the l-value width which resulted
in a vvp runtime error. This appears to be because the width
for padding is the defined width, but the constant is printed
using its internal width which previously could be larger than
its defined width.
These constants are local nets so I added that flag as well.
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
When printing the strength information for a multi bit net this patch
adds an underscore between the individual bit strength values. This
makes it easier to see the individual bit values.
A patch to insert the version string from git broke compilation when
the source was not a git repository or when building in a read-only
source tree. This patch avoids breaking compilation by using a
graceful failure mechanism for generating the version string and does
not write to the source tree.
Rework the MUXZ and MUXR code to use an enum instead of plain
integers for the select input state. This makes it more obvious
what is actually going on.
This patch adds a flag to the MUXZ object to make sure that it will
run at time zero if needed. If this is not done the default Z result
may not be overridden by an X result.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
This patch removes the overly optimistic lookaside save for a signal
that has been set (%set/v). This is incorrect because if a force or
assign are active the value will not be set as expected.
Parameters with vector descriptions that are not zero based and
are used in net contexts should generate the properly ranged
temporary signals. This causes subsequent part selects to work
out properly.
During elaborate_sig, the code to detect implicit wires did not
properly account for the possibility that the name is that of an
explicitly declared parameter.
This patch add (I believe back in) the < and > characters to the
general T_SYMBOL regular expression. The match was also moved after
the special T_SYMBOL cases so that flex would match them correctly.
Flex matching rules are longest or if a tie the first.
This patch adds code to prevent the broken synthesis code in
the development branch from core dumping. Broken code here
refers to the Icarus code not a Verilog file.
This patch fixes a delete[] vs free problem in the NexusSet
class. The items_ array was being allocated with malloc/realloc
and freed with delete[]. The quick fix was to replace delete[]
with a call to free(). A better fix would probably be to rework
the class to use a vector.
The default nettype was not always being set. This patch
modifies the NetScope constructor to get the default
nettype from a parent if it exists. It is set to NONE if
a parent does not exist.
This patch fixes some allocation problems (mostly in the parser
and lexor relating to identifiers). It also fixes a couple places
where uninitialized variables were used. All found with valgrind.
There are still 100 tests that have problems. Many of these appear
to be related.
Macro argument substitution used to just use strstr() to
find an argument that needed to be substituted. This is too
aggressive. It would do argument substitution in the middle
of keywords and other identifiers. A new routine is used
that verifies the character preceding the match is not
a normal identifier character [a-zA-Z0-9_$].
Binary bit based operators were not padding arguments if they had
different widths. The reduction operators and ! were not correctly
evaluating their arguments in a self-determined context.
vvp did not have the ability to handle real parameters.
This patch fixes that omission. Parameters are only used
by vpi calls to get compile time information.
Problems with signed expressions that are set to parameters and
that include multipliciation exposed a few bugs in the calculation
of signed multiply. Fix this and add some improved diagnostics.
It is questionable, but probably legal, for expressions passed as
arguments to input ports of various kinds of gates to implicitly
declare nets. This patch allows the scan through different types
of expressions for implicit nets.
The elaborate_sig handling here does not test for the legality of
having a non-trivial expression as argument to a port. For example,
it is definitely NOT legal to have r-value expressions passed to
output or inout ports. But that will be checked for later when the
instance is elaborated for real.
Threads used to be deleted when they finished processing code.
The problem with this is that some of the code could be
rescheduled to run at rosync ($strobe, etc.). This allowed the
thread data the code depended on to be reaped too soon. This
patch uses a new queue to schedule thread deletion. The queue
is processed after rosync has finished.
This patch makes the muxz and muxr functors schedule events
instead of directly calling vvp_send_*(). This prevents the
code from going into an infinite loop when the output feeds
back to the select.
This patch only applies to the ternary operator when used in a
continuous assignment. It adds short circuiting when the expression
is a constant true or false. It does not optimize the special case of
a constant 'bx expression with constant T/F expressions.
This patch enhances dump() for function definitions, by indicating a
signed result with a prepended "+" and also printing the MSB and LSB.
This matches other dump() routines. It also prints the arguments with
the same information. The arguments also include their type "input",
"output" or "inout".
If implicit nets are declared during elaboration, then the success
of binding during elaboration will depend on the order of the code
in the source file.
The dup_expr() function for NetESignal was not copying the word_
expression. This would cause an individual array access to turn
into an entire array access. The file and line information was
also not being set correctly.
An assert() in tgt-vvp/eval_expr.c was also replaced with an
exit() since the appropriate information was already being
printed.
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
The IVL_EX_NONE type was not displaying any message and default did not
use the new ivl_expr_{file,lineno} functions to get the source location.
This patch remedies these problems.
vpi_put_value can mimic force and release with vpiForceFlag and
vpiReleaseFlag flags to the vpi_put_value call. With this patch,
the infrastructure is added to allow the flags argument to be passed
to the dispatched put_value function, and for signals handle those
flags as force/release of a net.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
When a bit port of a module instance is connected to a vector
argument, the MSB module instance should be connected to the MSB
of the vector argument. This matters only in the rare case that
the %m is used. It also makes wave dumps come out right.
The updates to the do_include code destroyed the
handling of absolute paths; all of the code that
handles buffer-switching was erroneously placed
in just the relative-path branch. Thanks go to
Cary R. for pointing out the problem.
Now the common code has been extracted yet again,
and the notorious goto statement has been used
in favor redundancy.
The test vvp_reg.pl produces the same output as
before, so hopefully nothing new is broken.
Signed-off-by: Michael Witten <[email protected]>
Normally processes are found in the lexical scope of a module, but
there are special cases where processes (other then task/function
definitions) are in other lexical scopes. The most likely case is
initilizations that are in the lexical scope where the assigned
variable is declared.
In the process, the behaviors list is kept in the base PScope class
instead of the Module or any other derived lexical scope class.
Case-generate alternatives create sub-scopes that need to be scanned
by the scope scanner in order to get function definitions etc. that
are defined lexically within generated scopes.
This patch converts a constant real index to an integer value when
defining an array. This can happen when using 2**8 which returns a
real value since the operands are signed.
draw_number_bool64() in tgt-vvp/eval_bool.c was using %ix/load to
load immediate values into registers greater than three. The problem
was that of_IX_LOAD() in vvp/vthread.cc was masking off the upper
bits. This was putting the results in the wrong register. This patch
removes the bit masking from of_IX_LOAD() and updates the %ix/load
documentation.
The file lexor.lex was beginning to suffer a catastrophic
increase in entropy due mainly to the mingling of spaces
and tabs--an age-old problem that often finds itself as
the subject of many a religious war.
The key rule: Make it consistent in as many editors as
possible; this was achieved by converting all hard tabs
into soft tabs (composed of spaces) of width 4.
I couldn't help but make modifications to the code as I
tabifified, but most of the changes are strictly style.
While maintainers generally treat large scale whitespace and
formatting changes with much caution, I believe that the code
is now much more maintainable; moreover, the test suite
produces the same results as before.
Signed-off-by: Michael Witten <[email protected]>
Macro names cannot be compiler directive names.
Such trespasses are now recognized and reported:
(1) Offending `define lines are skipped.
(2) Offending macros meant to be expanded
are replaced with nothing.
Signed-off-by: Michael Witten <[email protected]>
Move the storage of wires (signals) out of the Module class into
the PScope base class, and instead of putting the PWires all into
the Module object, distribute them into the various lexical scopes
(derived from PScope) so that the wire names do not need to carry
scope information.
This required some rewiring of elaboration of signals, and rewriting
of lexical scope handling.
The ordering of the logic was a little strange before.
Also, there were unnecessary operations, like the assert
and the include_dir[0]=0 business.
Signed-off-by: Michael Witten <[email protected]>
Discussions online and "standards" documents are never
conclusive, but the code that was present suggests that
iverilog adopts the sane practice of resolving relative
paths against the directory of the file that is currently
being processed.
Unfortunately, when a relative path is made absolute, the
code forgot to update the necessary include_stack_t object.
This has now been fixed.
Signed-off-by: Michael Witten <[email protected]>
When the lexical analyzer encounters and EOF, the
analyzer invokes yywrap() to determine what to do
next. The function determines one of two paths of
execution:
(1) If yywrap() returns 0, then the analyzer
assumes that yywrap() has setup a new input
source, and so scanning continues.
(2) If yywrap() returns non-zero, then the analyzer
assumes that yywrap() has not setup a new input
source, and so the analyzer proceeds to run the
matching EOF action (the default of which invokes
yyterminate()).
NOTE: The analyzer does not touch the start condition.
The old implementation was using yywrap() to destroy the current
input source and setup the next one. However, this causes problems
when the analyzer is in the middle of parsing some directive:
(1) Because yywrap() is called before any EOF action,
the include_stack_t structure is destroyed before
being used in the EOF action; the result is a segfault.
(2) Because yywrap() does not change the start condition,
any EOF action would occur completely out of context;
however, because of (1), this problem never cropped
up.
The new implementation simply:
(1) Employs "%option noyywrap", which effectively causes
the analyzer to act as though yywrap() produces a non-zero.
(2) Renames yywrap "load_next_input".
(3) Calls load_next_input() explicitly in exhaustive EOF actions,
so that control is more fine grained.
The added benefit is that the code that finishes parsing EOF terminated
directives now works properly; `include and `define directives previously
segfaulted in such situations.
Signed-off-by: Michael Witten <[email protected]>
This variable was used in yywrap purportedly to obviate
hidden access to a file that should be closable.
After investigating the code flex produces, it would
seem that these fears are unfounded.
Signed-off-by: Michael Witten <[email protected]>
The verilog preprocessing language is sufficiently simple
that the parser may be implemented by hand on top of the
lexical analyzer.
In fact, ivlpp was already implemented in this way; relevant
[bison] parser files specified no grammar, and the parser
entry-point (yyparse) was simply an indirect use of the lexical
analyzer (yylex).
Therefore, parse.y has been removed, invocations of yyparse()
have been replaced by yylex(), references to bison generated
files have been removed, and Makefile.in has been updated
accordingly.
Signed-off-by: Michael Witten <[email protected]>
This patch fixes two problems. The first is that thr_check_addr()
was being used inconsistently. It should be passed a real address,
but the resize of the vector should be at least one more than this
address. The extra and unneeded CPU_WORD_BITS was also removed
from the routine.
The second problem involved an invalid memory access in
vvp_vector4_t::set_vec() when the vector being copied was an integer
multiple of the machine word width. Under this condition there would
be no remaining bits that needed to be copied but the routine was always
trying to copying some remaining bits. This code is now only executed
when there is a remainder.
Neither of these appear to be causing runtime problems. The second one
was found with valgrind. The first were found while tracking down the
second problem.
All the pform objects that represent lexical scope now are derived
from the PScope class, and are kept in a lexical_scope table so that
the scope can be managed.
This patch adds support for delaying constants at time zero. It also
cleans up the code in elab_net.cc to use this capability instead of
building it with an extra BUFZ to carry the delay information.
Modules, functions and tasks are named scopes so derive them all
from the PScope base class. These items all take scoped items, so
the eventual plan is to move these items into PScope.
This patch adds a real error message instead of an assert when
someone attempts to release a part or bit select. I plan to work
on the real functionality soon.
This patch adds the power operator for signed bit based values
in a continuous assignment. It also fixes a few other power
expression width problems. The expression width is still not
calculated correctly, since the correct method can produce huge
possible bit widths. The result is currently limited to the width
of the native long. This is because lround() is used to convert
from a double to an integer. A check in the code generator protects
the runtime from this limitation.
Generate case is a complex generate scheme where the items are
sub-schemes of the case generate itself. The parser handles them
something like nested generate statements, but storing the case
guards as the test expression. Then the elaborator notes the
case scheme and reaches into the case item schemes inside to make
up tests, select the generate item, and elaborate.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
User functions called in a continuous assignment were not getting
their scope mangled. This is needed to handle arrayed instances and
possibly other things.
This patch fixes some bugs in the implementation of signed integer
division with wide operands in constant expressions and adds support
for signed integer modulus with wide operands in constant expressions.
It also removes a few redundant lines of code.
Incorrect trimming of unsigned verinum values was causing the
compilers unsigned constant verinum pow function to give
incorrect results. This patch restores the pow compile time
optimization and fixes the trimming to always leave a single
zero in the MSB.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
Currently, if a localparam declaration does not include a type or
range, the RHS expression is cast to an unsigned value. This patch
changes this to make the localparam inherit the type of the RHS
expression, as is done for parameter declarations and is specified
by the Verilog-2001 standard.
This patch adds a check and prints a warning message when the power
operator is used with unsigned bit based values. It also fixes a couple
of typos and adds an asserts if the above power operator happens to
get to the tgt-vvp back end.
Fallout from me trying to understand the origin of pr1780480
and pr1830834. Too bad I don't understand c++ and vvp as
well as I understand English!
(Spelling and grammer fixes in comments. -ed.)
vvp/main.cc was including asm/page.h on GNU/Linux
systems, though that file does not often exist and
is not necessary.
Signed-off-by: Michael Witten <[email protected]>
Padding and continuous assignment caused problems if the continuous
assignment includes a delay. The problem is that the padding was
not necessarily included in the delay. Rework the elaboration to
make sure the padding is indeed included in the delay.
This patch adds some checks to verify that shifts, the reduction
operators and the bit wise operators are not used with real values.
It also includes a few other cleanups.
This patch makes sure the delay is calculated correctly when only some
of the bits change and you are comparing against the initial (t0) value.
Basically you have to check the initial value against all the bits in
the new signal not just the first bit since the order that bits change
is not deterministic.
This patch add delays in continuous assignments for the shift operators,
concatenations and replications. It also reports an error if the user
attempts to take the modulus of a real value.
This patch uncovers a couple other problems in the system. I am trying
to fix one of them. I will report the other problem shortly.
This patch fixes some of the delays in bit based continuous
assignments (unary -, unary +constants, string constants,
reduction operators and user functions).
Use draw_lpm_output_delay() in all functions that need it.
Addresses pr1879226 on a couple of levels. Analysis:
NetNet* PEBinary::elaborate_net_shift_() didn't flag dist==lwidth
as a case where all bits of the input are shifted away, which made
it create a real concatenator for this case. It attempted to create
NetNet*tmp with zero width, which doesn't work; (lsb,msb) ends up
as (0,-1), which is later interpreted as a 2-bit wide net.
Added an assert to the NetNet constructor to catch any other lurking
attempts to create zero-width nets.
Added short-circuit code to handle the case where all bits of the input
are shifted away. This case used to be "handled" by an assert failure.
When used in continuous assignments, user defined functions may have
delayed output. Handle that by generating the proper .delay node when
needed to delay the output of a .ufunc node.
Allow user defined functions to take real value arguments and return
real value results in net contexts. Use the data type of the nets
attached to the ports to define the data types of the arguments and
return value.
There was much redundant code in the compile-tile handling of the
less-then and greater-then of constant expressions, and much of it
was buggy. Unify much of the code and squeeze out the bugs so that
compile-time evaluations come out correctly.
The compiler attempts to precalculate the results of <= comparisons.
Fix a few corner cases where the arguments are signed. Also fix the
important test of constant against non-constant where we try to test
if the non-constant value can possibly make the test fail.
When conditional delays are in use, it is sometimes possible for there
to be no delays available for a given input event. In that case, skip
the delay processing for that case instead of crashing.
Previously only the logical operators (~, &, |, ^, etc.) supported a
delayed value in a continuous assignment. This patch should extend this
to all operators. An extensive check of real values was done. The same
will be done shortly for bit based nets.
Checks for constructs currently unsupported in continuous assignments
provide a more explicit message (** operator, real user functions,
{!, && and ||} operators with a real argument).
Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
The continuous assignment multiply expands vectors to the sum
of the two widths. This is correct for bit based vectors, but
for real variables it should always be one bit wide.
The sys_funcs table should be left to those functions that are handled
internally by the compiler. Really, the internal sys_funcs table is a
legacy from the days before the compiler supported system function
tables in the .sft format.
System functions used in a continuous assignment must be defined
in the system function table since the name of the system functions
is kept in this definition. The default name is NULL which causes
problems. This patch add $rtoi to the system table and adds a check
for a NULL name.
The comment that shows the intended value for real constants was
being printed with a %f. This is wrong for large or small values.
This patch changes the %f to a %g to get more consistent results.
A right shift may generate extra bits to preserve the proper shift
characteristic. This patch replaces the assert that was forcing the
input vector to not be greater than the input port width with code
to only select the required lower bits from the vector if it is
larger than the input port.
This patch adds support for the following statement:
<vector>[<i>] <= #<delay> <value>.
It is a copy with slight modification of code from the next
else/if clause.
The nodangle functor tries to delete NetNet objects that are not used.
But NetNet objects that are addressed by a NetArrayDq should never be
dangling. So make sure the NetArrayDq marks the target NetNet correctly.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
In nets, if system functions return a real value the function lookup
was getting the correct width, but was also setting the width to 0,
which confused down-stream net handling. Real-value system fuctions
have a width of 1. (1 real-valued scalar.)
This patch modifies the conversion functions $rtoi, $itor,
$realtobits and $bitstoreal calltf routines to be more efficient.
This is done by caching the vpiHandle to the argument in the userdata
pointer. This eliminated the need to get the argument iterator, scan
and free the iterator.
It also updates the error messages to use the new file and line
number information that is available for system functions. It also
adds a check that verifies the functions are only called with one
argument and makes the errors fatal.
This patch schedules the input value change to .sfuns calls to avoid
potential recursion problems. It also cleans up two put_value calls
that did unneeded loops when putting VectorVals and the width was
greaten than 32 bits.
This patch adds a new flag to vvp "-n" that can be used to make
$stop and hence <Control-C> act like $finish. This may be desired
when using vvp in a non-interactive environment.
tgt-vvp/eval_expr.c uninitialized variables
vpi/sys_display.c uninitialized variables
vvp/vpi_priv.cc deprecated string constant usage
vvp/vpi_vthr_vector.cc deprecated string constant usage
the last entry invokes vpip_name_string() and uses const char *
in the same way as the other 9 callers in vvp/*.cc, the only
difference is that the argument is static instead of computed.
cvs -z3 -d:pserver:[email protected]:/cvsroot/gtkwave co -P gtkwave3
delete CVS logs embedded in files
had to add #define wave_alloca alloca to lxt2_write.h
differences remain relative to upstream .h files:
whitespace
value chosen for LXT*_WR_SYMPRIME
Regarding the latter, Tony writes "Don't worry about the .h file.
The only difference is a considerably larger initial hash size.
If this isn't a problem with Icarus now, it certainly doesn't
need to be bumped up."
Fix data type handling of module ports. When ports are declared
as ports and given data types in different statements, the parser
incorrectly (and silently) dropped the intended data type for the
default LOGIC type.
Rework the ivl_file_table_* interface to be more generic and easier
to use. Also all the vvp examples except for memory.vvp have been
fixed to run correctly with the current vvp. Someone with a bit more
experience will need to fix memory.vvp.
Add the vpiFile and vpiLineNo properties to system functions.
Most other objects have stubs that return "N/A"/0. Interactive
functions (called from the debugger) use <interactive> for the
file name.
Use the precompiled defines file support of the ivlpp preprocessor
to pass defines made in the main program to processed library modules.
In other words, a `define in the Verilog source will be visible to
library modules.
Core preprocessor support for writing out and reading precompiled
defines. The preprocessor can read initial precompiled defines from
any number of specified source files, and can write all the defines
into a specified output file.
With this change, local symbols are not emitted in the vvp target,
but are marked as local. When thus marked, the vvp run time does not
offfer any VPI access and the signals (net or var) are effectively
invisible.
Zero-based part selects are a special case that is handled with
optimized code. Properly handle the part select width to get the
desired padding.
Signed-off-by: Stephen Williams <[email protected]>
The code to handle real functions using the PLI 1 interface was
missing some functionality. This patch fixes that and fixes a
bug in the veriuser.h include file.
The recent changes to vpi_get_str had a minor problem that was
causing a core dump when trying to get the vpiFullName of an
arrayed signal. Basically vpi_get_str is not reentrant so the
name must be duplicated. It must also be duplicated to work with
the free in the code (do not free a result_buf).
Add support for a default, standard, implicit include directory
in the base directory for the ivl installation, where standardized
Verilog header files may be placed.
Rework the handling of file names to use a perm_string heap to hold
the file names, instead of the custom file name heap in the lexor.
Also rename the get_line to get_fileline to reflect its real duties.
This latter chage touched a lot of files.
Gets rid of a few warning: deprecated conversion from string
constant to 'char*', follows IEEE 1364-2001C 27.10 in more cases,
and fixes at least one real bug (look at the previous use of
strdup/strcat in real_var_get_str() and signal_get_str()).
When evaluating bitwise binary expressions at compile time, get the
signed/unsigned padding correct. Pay special attention to the case
of $signed/$unsigned changing the signedness of the operand.
Prevent an overflow of command line flags if the -Wall argument
is used multiple times, and fix processing of individual flags
that may be in the beginning of the warnings flag buffer.
When user defined function calls are withing a $signed, the result
needs to be properly padded. To make this work, handle padding of
a function result exactly type the padding of a signal vector. this
is natural in that the function return value *is* in a signal vector.
This fixes pr1841300.
This patch fixes the calculation of the scope type in draw_scope.
This code is really only used in the VCD dumper so I commented it
out in the other two. The problem was that the lower scope was
used to calculate the scope type. It is also now an error to try
to draw an invalid scope type.
This patch fixes a number of problems associated with the various dumpers.
1. It catches the problem uncovered in pr1809904 and prevents the core
dumps from happening. It prints a warning message if you try to change
the file after the program has started dumping data to the file.
2. It makes all the dumpers work in the same manner. Before the VCD
$dumpfile was processed at compile time, but the LXT/LXT2 versions
did this at run time. The correct place for this is the run time so
that you can pass the task a calculated name.
3. All the dumpers use common compiletf routines located in vcd_priv.c
4. Make the LXT/LXT2 $dumpfile commands only get the file name and
let $dumpvars actually open the file. This matches the VCD code.
5. Fix the $dumpfile code to allow calculated file names.
6. Make dumpvars without a scope/variable match all toplevel modules
not just the toplevel module the $dumpvars was located in. This
now matches the standard (2001).
7. Simplify the no dumper code (vcdoff.c) and add missing functions.
8. Cleanup the code and messages.
9. vvp can take -none for no dumper.
This patch fixes another minor problem introduced by the process
end of simulation events. Specifically if the compilation has
indicated we should not run do not even start the main event loop.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
When loading a part select from the least significant bits, it is
OK to use the %load/v instruction to strip the high bits off. This
allows the zero-based part select to work in one step, without
loading excess bits.
Some patch caused a variable that held the constant base of a part
select to become unassigned. This led to unexplained failures to part
select a signal. Fix by properly detecting the case of a constant base
of 0 for the part select.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Using the parser supplied error token to get file and line number
information appears to give incorrect results at best and core dump
at worst. This patch uses the closest real token that makes sense
to alleviate this problem.
Use the new array VPI functionality (vpiIndex, vpiParent, vpiArray)
to dynamically generate array word names. The old patch to implement
was mostly reverted.
Add the array related VPI calls. These will be used to generate
the array word name only as needed to conserve space. This patch
also makes scanmem3 from the vpi test work correctly after a
slight gold file update.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
The patch for adding support for macros with arguments contained
a leftover debugging aid. This patch corrects the code. It also
should eliminate some compilation warnings.
The functor counters were left over from the v0.8 release. Rework
the counters to be relevent to the current state of vvp.
Signed-off-by: Stephen Williams <[email protected]>
This patch modifies the preprocessor to handle text macros with
arguments. It also fixes a bug that prevented a `line directive
being issued after a multi-line text macro had been instantiated.
The second argument of $sdf_annotate is the scope that is to be
annotated. The argument is optional, and the default is to annotate
the current scope, where the $sdf_annotate is invoked.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds a -D option to iverilog-vpi and updates the manual
page to document this option and some others that were missing.
From c7347239335558b26c873ea5e64d278d1feff38a Mon Sep 17 00:00:00 2001
From: Cary R <[email protected]>
Date: Thu, 29 Nov 2007 10:31:25 -0800
Subject: [PATCH] LD should be based on $CC and not hardcoded to gcc
Fix the default loader so it will be whatever the default C
compiler is ($CC).
---
iverilog-vpi.sh | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/iverilog-vpi.sh b/iverilog-vpi.sh
index fbccedb..d2512cc 100644
--- a/iverilog-vpi.sh
+++ b/iverilog-vpi.sh
@@ -25,7 +25,7 @@ CXX=@IVCXX@
CFLAGS="@PIC@ @IVCFLAGS@ -I@INCLUDEDIR@"
# These are used for linking...
-LD=gcc
+LD=$CC
LDFLAGS32="@SHARED@ -L@LIBDIR@"
LDFLAGS64="@SHARED@ -L@LIBDIR64@"
LDFLAGS="$LDFLAGS64"
--
1.5.3.4
Handle the special case that the SDF CELL instance is empty. In this
case, the SDF file is requesting the current scope instead of an
instance within the scope.
Signed-off-by: Stephen Williams <[email protected]>
the lexor didn't allow numbers in the IDENTIFIER name,
and the parser wasn't very nice with IDENTIFIER errors.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the ability to dump array words. The words are only
dumped if they appear in a $dumpvars() statement (they are not dumped
by default). The name used for the word is <array_name>[<index>], so
you can get unexpected name conflicts.
There is also a slight increase in the memory requirements since each
array word now keeps its own name information. In the future we would
like to change this, but that is a much larger rewrite of the array
code in vvp.
This patch also needs the "Prefix escaped identifier ..." patch to
work correctly (the array word name is an escaped identifier).
Comparison operands are signed only of both operands are signed.
If one is unsigned, then they both are unsigned. This does not
affect the signedness of the comparison itself, which is unsigned.
Signed-off-by: Stephen Williams <[email protected]>
Implement extended vvp command line options to control the amount
of detail that the sdf annotator emits while parsing the source
file.
Signed-off-by: Stephen Williams <[email protected]>
Pass parsed SDF delays into the vvp run time as vpiScaledRealTime
variables, and handling the mapping of 2-values to 12-delays.
Signed-off-by: Stephen Williams <[email protected]>
The LXT and LXT2 formats ignore/work with duplicate variables in
$dumpvars() commands, but VCD output includes extra definitions that
may cause some confusion. This patch checks for duplicates and prints
a warning when they are being suppressed.
It also corrects some error messages in the LXT and LXT2 files to not
reference VCD and some other message cleanup.
The min/typ/max default warning was not being produced in all
locations a min/typ/max expression could be used. This patch
adds the default warning code to all locations. It also
modifies the manual page to explicitly state that only the
first ten warnings are printed.
GTKWave needs to have escaped identifiers properly escaped (preceded
with a back slash) in its VCD input. Without this the name may not
display correctly. Even though it is not required, to keep things
consistent LXT and LXT2 formats also prefix escaped identifiers with
a back slash.
This patch causes unnamed generate blocks to be automatically named
using the naming scheme defined in the Verilog-2005 standard. This
is a fix for the problem discussed in pr1821610.
This patch cleans up some of the crashes in the synthesis
code by incrementing the error count as appropriate. This
also removes the three false positives in the test suite
(Sorry-Ran-PASSED). A few other messages will change in
the test suite as well (blocksynth? and basiclatch).
This was causing a core dump for a number of the vpi test cases.
The problem was that they did not need the simulation time, so it
was being set to NULL. The problem was the EndOfSimulation callback
was always setting cb_data.time to the current time. A big problem
when the pointer was NULL. The solution is to only set the time
when the pointer is not NULL
During elaboration certain constants were getting extended with
the MSB. This patch makes that happen only if the constant does
not have a length. At this point most should have a length so
effectively every unsigned value is extended with 0.
For text macro substitutions the lexor did not allow leading underscores.
This patch fixes that omission. All other places that text macros may be
used appear to be correct.
Most types in Icarus support a single array dimension (reals do
not support arrays at all). If you try to use an invalid number
of dimensions the parser will now display an error message.
String values are known to be 2-value bits, so they are natural
candidates for using the movi instruction to load the value in
far fewer instructions. With this patch, up to 16bits (two bytes)
at a time can be loaded per instruction.
Signed-off-by: Stephen Williams <[email protected]>
tgt-vvp was taking strings and processing them as is, but the strings
could contain octal constants. These constants needed to be converted
to binary form before they could be turned into a bit pattern.
CMOS gates like NMOS and PMOS have a strength aware output.
They were missed when the NMOS and PMOS were fixed. "cmos.v"
will now pass in the test suite.
A previous patch I submitted to try and keep the $finish time
events missed the case of an infinite loop that did not advance
the micro time step which then prevents the debugger from
generating a finish (you can interrupt an infinite loop, but you
could not finish out of it). This patch adds a check for a
finish after each debugger call to fix this problem.
When nets are forced by non-constant expressions, the value is linked
to the destination net through a force_link. This patch adds the code
needed to unlink a force/link so that release and new force/links can
work. This fixes pr1735836.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds marks at simulation end if needed and enabled (on
and not over the limit) for vcd/lxt/lxt2 files. End of simulation
callbacks also now have the correct simulation time. The default
file names for lxt and lxt2 now match the vcd file except for the
extension. lx2 is also an alias for lxt2 and the default lxt2 file
extension is lx2. This matches what GTKWave expects. Any lxt2
diagnostic output print LXT2 instead of LXT to make it clear which
dumper you are using.
Handle arithmetic right shift during compile time. This comes
up with both the operands are constant expressions. the compiler
is able to evaluate this down to a constant to replace the
expression.
Signed-off-by: Stephen Williams <[email protected]>
Here are some more array fixes. They are mostly better error messages
instead of just asserting and some code cleanup. The one new thing
that probably should have been a separate submission is that down
indexed part select [base -: width] can now be a lvalue.
This patch fixes/enhances the array part select code. It also
verifies that any lval array index in a continuous assignment
is a constant value. Also, %set/av now uses index register 1 as
described in the documentation (as a bit offset).
@* was only expanding to input nets. nex_input() for blocks was removing
any output net that was also an input. There was also a bug in how output
nets were removed. Only outputs currently defined were removed from the
input list.
always @(*) begin
y = a;
z = y;
end
would report "a" as an input. While
always @(*) begin
z = y;
y = a;
end
would report both "a" and "y" as inputs.
To fix this all nex_inputs now take a flag that when true (the default)
correctly removes any output from the input list. Both the above cases
will now return "a". If the flag is false outputs which are also inputs
will be included in the input list. This is what the @* elaboration code
uses to get the correct sensitivity list.
Add/rework VPI access to modpaths. This allows VPI code access to
paths described in specify blocks. In the process, the VPI structure
has been reworked to conform to the IEEE1364 standard.
Signed-off-by: Stephen Williams <[email protected]>
Cleanup klunky implementation of vpi_get/put_delays for modpath
objects. Remove some useless members.
Signed-off-by: Stephen Williams <[email protected]>
Wide division/modulus (more bits than unsigned long) gave incorrect
results when both the divisor and dividend where the same. They also
did not produce an error message when dividing by zero.
This patch enhances the current fflush implementation to flush a mcd or an
individual fd. Before it always flushed everything. A compiletf routine was
also added.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
Modpaths need to be in the proper scope in order to be available to
vpi functions. The code generator manages that by writing the modpath
records with scope switch functions. Batch the modpath records at the
end of the structural stuff so that the scope switching doesn't cause
trouble.
Also seperate the modpath code into its own source file.
Signed-off-by: Stephen Williams <[email protected]>
Delay paths need a scope. This helps the code generators bind the
modpaths to the correct scope. This patch doesn't actually make use
of the information, it just makes it available to code generators.
Signed-off-by: Stephen Williams <[email protected]>
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.
Signed-off-by: Stephen Williams <[email protected]>
The << operator may not be defined when the RHS is greater than or
equal to the LHS width. To work around the problem the mask is
incrementally generated.
There have been reports in the field of number-to-real conversions
doing bad things with the calculated mantissa. This patch eliminates
a opssible portability problem by reworking the negating of negative
mantissa values.
Signed-off-by: Stephen Williams <[email protected]>
Print out a warning if extra digits are given for sized binary, octal
or hex constants. Decimal constants are very hard since we never
calculate the true number of bits the digits represent, so for now
decimal constants are not checked.
The attached patch add an implementation for $dumplimit(). It does
not do a hard limit to the file size, but for VCD files it completes
the current time step and puts a comment in the file. For lxt and
lxt2 files the functionality is in place, but because of buffering
the file can be slightly larger than expected.
Factor common code for processing signed constants to be padded.
In the process, fix some minor bugs in the padding decisions.
Signed-off-by: Stephen Williams <[email protected]>
Fixed some signed/unsigned warnings, including one that caused an
actual runtime error if not dealt with safely.
Signed-off-by: Stephen Williams <[email protected]>
The argument to $unsigned is self-determined no matter what the
context the $unsigned itself is in. This is important only where
the result can be negative but the result width is context-determined.
Do ocntext fitting manually to prevent the context fitting it and
affecting the expression argument.
Signed-off-by: Stephen Williams <[email protected]>
This patch implements the System Verilog $urandom() and $urandom_range()
functions. There are no check to verify that $urandom_range is only given
unsigned arguments. If you give it a negative value the bit pattern will
be interpreted as a unsigned number.
Fix the handling of expressions that have unsized integers and are
in self determined context. Unsized integers are generally assumed
to have at least 32bits.
Signed-off-by: Stephen Williams <[email protected]>
Constant propagation incorrectly elided an entire constant net node
if only the LSB of the driven vector was HiZ. This caused the entire
vector to look like HiZ. Also, the code generator for writing the
constant values missed bits.
Signed-off-by: Stephen Williams <[email protected]>
signed compare in proceedural code was comparing the absolute
value if both operands were negative. Wrong!
Signed-off-by: Stephen Williams <[email protected]>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the ability to call command files from other command
files. There is currently a limit of 16 total levels deep (15 stored
plus the current file). -f is now an alias for -c for both the command
line and command files. The parser also reports errors when they occur
along with the file name and line number to aid in debugging problems.
In expressions, user defined functions have a clearly defined
width and the test_width expression needs to express that. Note
that the $signed/$unsigned functions are special and magical.
Signed-off-by: Stephen Williams <[email protected]>
Variable word addresses are not to be adjusted by the bit select
of the vector direction. That is a holdover from when arrays were
stored as bit vectors.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds ivl_scope_time_precision() to the compiler which can
be used to extract the local scope precision. tgt-stub and tgt-vvp
have been modified to use this new function and output a value that
is appropriate. The vvp runtime has been altered to use this new
data which is accessed with the vpip_time_precision_from_handle()
function. vpiTimePrecision uses this function to return the correct
precision.
The outputs to bufif and nmos/pmos devices are always strength-aware,
so should have their outputs connected to a net8 device.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds min_typ_max to expressions. Remember when using a
min_typ_max triplet in an expression they must be enclosed with
parenthesis (1364-2001 section 4.3 page 58).
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.
- GSoC 2007
It is legal in Verilog to bind expressions to ports that do not
match the port width. Icarus Verilog needs to create the necessary
part selects to get the connections right.
Signed-off-by: Stephen Williams <[email protected]>
Add code to handle all the primitives currently defined and
fixed a power of ten error in the time units display (it is
either 10^{units} or 1e{units}, but not 10e{units}).
This patch adds functionality to verify that primitives are given
an appropriate number of ports. For multiple output gates (but,
not, pulldown, pullup) it also reports that Icarus currently does
not support multiple outputs when more than one is given.
When a repeat concatenation expression is translated to a netlist,
get the repeat expression right. This comes up when an elab_and_eval
elaboration contains a repeat concationation, and the expression is
ultimately turned into a netlist by expr_synth.
Signed-off-by: Stephen Williams <[email protected]>
Signed divide of 32bit values can overflow if done in a 32bit long
due to the truncation of sign bits. So use the large value algorithm
if the values are >= 31 bits (63 bits on 64bit machines).
Signed-off-by: Stephen Williams <[email protected]>
This patch adds checks to verify that functions do not invoke
statements that are invalid for them (#, @, wait, enable/call
tasks and non blocking assignment). For reference see section
10.3.4 of 1364-2001.
C style comments were not recognized as comments in false or
suppressed sections of ifdef/etc. blocks. This prohibited an
unneeded endif/else/etc. from being commented out with this
style of comment.
I decided not to delete these since we may at some point in time want
this functionality back. For now they are commented out with an
explanation so we know what is going on.
This patch splits the end of compile and the start of simulation call
backs code into two different procedures. The end of compile events are
still executed at the same time they alway were. The start of simulation
events are now run after initialization.
The event loop used to check for $finish at every iteration. This patch
alters this behavior to only check just before you advance to the next
time step. This allows events for the current time step to complete.
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Previously list of port declarations were considered a complete
definition of the port. This caused problems for some, so this patch
allows implicitly defined ports (no wire/reg/etc.) to have net
declarations in the body.
This would have never been a problem with the actual circuit generated.
The problem was that the assert was checking values that had never been
set. The constructor now explicitly sets these values to zero and while
I was at it I added a couple more asserts.
This patch is rather large and fixes a couple of problems. The major
change is that instead of keeping all the range specifications in
a list that is later processed the information is now kept as
individual entries for the port and net definitions. This allows
easier checking for multiple definitions (pr1660028), more
detailed error messages and the ability to pass the now deprecated
style of a scalar I/O definition used with a vectored net definition.
These changes did require extra code to prevent a single definition
from setting the range values in more than on place.
When using the new ANSI-C style of port declarations (1364-2001 12.3.4
list_of_port_declarations) the compiler ensures that you do not
redeclare the port in the body (it is already completely defined).
This caught a few errors in the test suite (pr859 and sqrt32*).
The flag to disable the normal port checking and allow the deprecated
port syntax is -gno-io-range-error. This will print a warning for the
case of a scalar port with a vectored definition in the body. All
other cases are still considered an error.
This patch adds better checking for a missing endmodule or an attempt
to nest modules. A more descriptive message is printed and the location
of the original module definition is printed.
It is possible for the compiler to generate logic gates that have
inputs from part select nodes. This implements the part select
input methods.
Signed-off-by: Stephen Williams <[email protected]>
This patch fixes an incorrect optimization that was skipping a
call to set the port width when there was no width (a scalar).
The problem with this is that since a (0,0) pair was not added
to the list, later when the width was define to (1,0) the checking
code did not have the (0,0) to tell that there was a mismatch in
the port size. Section 12.3.3 States that the two sizes shall be
identical, so yes this is an error even though it is very minor.
This patch makes vpiFullName for real variables return the correct
value. A Scope reference was added to the base structure along with
the relevant code to support generating the full name. A couple of
memory leaks were plugged and some formatting fixed as well.
It appears that other simulators allow the second argument to
vpi_handle_by_name to be either a scope or a module. Allowing
a module in addition to a scope significantly increases the
usability of this function.
vpi_get_str() can now return a reasonable value for most of the
types used in vvp. I'm not certain I got all of them, but they
are easy to add if any are missing. I also fixed a couple of
typos that I found while looking for all the different types.
Real value constants have width 1 in Icarus Verilog. This is not
the same as the output from $bitstoreal, which is *not* a real
valued expression but a logic vector that losslessly carries the
real value.
Also remove unused CVS markings.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the missing vpiFullName property to binary and
string parameters (FYI real parameters are not currently supported
by the VPI interface).
This patch implements the swrite* and sformat system tasks. It also
makes $simtime distinguishable from the other integer time tasks.
This was needed to get the correct time units when $simtime was given
as an argument to $swrite*. The string constant code was also modified
to allow a string to be returned as a vector (0/1 bit pattern).
Here are some more specifics about the swrite* changes.
1. They do not share formatting code with the other display functions,
so they may/will produce different results.
2. All %{alpha} codes allow a width and justification. Others have been
enhanced (%t allows the default width and precision to be overridden,
time functions print with time formatting, better error checking and
messages, etc.).
3. %u and %z formatting codes have been added. It is important to note
that these two formats can produce embedded NULLs, since these
functions are returning a string anything after the first NULL will
not be reachable! memcpy is used instead of regular string processing
where needed so that the original string will contain the total
result. The size returned when the string is created is the true
length. A warning will be printed if a string with embedded NULLs is
produced (strlen() does not match the true length).
4. Real numbers are printed with %g instead of %f.
Once this new formatting code has been evaluated we should incorporate
the changes/fixes into the formatting code for the other functions or
the other functions could be modified to use this new code. The true
string length is available so we should be able to work around the
embedded NULL problem.
The calculated return value for the calculated strength value of
a net was left dangling. This patch fixes that. See pr1770199 in
the regression test suite.
Signed-off-by: Stephen Williams <[email protected]>
distinguish between self-determined and value-preserving when
evaluating constants that are arguments to concatenations.
Signed-off-by: Stephen Williams <[email protected]>
Support initialization assignments of real value variables. In the
process, clean up the processing of real variable declarations in
the parser.
Signed-off-by: Stephen Williams <[email protected]>
The standard states that the seed for the random functions should be
an integer/time variable or a register. This patch fixes the compiletf
routines to check for this. There is also a small patch to
vvp/vpi_signal.cc that removes an assert that was failing and replaces
it with appropriate code. The assert was verifying that the source was
not bigger than an integer. The problem with this is that a time
variable or register may be bigger than an integer. I altered the code
to remove the assert and copy only the lower (8 * sizeof integer) bits.
The potential overflow/loss of precision is not checked. This passes
the regression tests.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds a compiletf routine to the $deposit system task and
simplifies the calltf routine. It also patches the constant string code
to return an appropriate integer value when needed. A number of compiletf
routines that check for this can now be simplified since this (string
constants) no longer causes an assert in an integer environment.
Better handle cases where the scope part of a heirarchical name does
not match any existing scope, or where scope index expressions are
not correct.
Signed-off-by: Stephen Williams <[email protected]>
In rare cases, the reduction logic nodes may get vector part inputs.
This patch adds support for vector parts entering a reduction node.
Signed-off-by: Stephen Williams <[email protected]>
This fixes r-value type references to memory words for memories
that have a non-zero base address. Elaborate the expression
needed to get the canonical word index.
The port input count assertion was triggering incorrectly. It was
comparing the count with the bytes instead of bits in a word.
Signed-off-by: Stephen Williams <[email protected]>
The argument passed to $finish and $stop is not currently used, but it
is now passed down to the functions that may someday do something
useful with it (schedule_finish() and schedule_stop() in vvp/schedule.cc).
Add the missing probabilistic functions and add compiletf routines
for all the functions. The original calltf routines have been
modified as appropriate. The base functions are straight copies
from the standard. I have visually verified the curves with 5,000
points and they look correct.
Even though vpiFinish does not currently do anything with it's
argument I thought it would be best to have them all be in the
correct range [0, 1, 2], so they have been updated as appropriate.
Handle real valued expressions in vector declarations. Also clean
up the handling of vector declaration expressions.
Signed-off-by: Stephen Williams <[email protected]>
Nil parameter overrides can turn up in positional paramter override
lists, where items are intentionally skipped.
Signed-off-by: Stephen Williams <[email protected]>
Be careful to include bitwise differences in double values, because
it is the bit pattern we are passing aroung, not the arithmetic value.
Signed-off-by: Stephen Williams <[email protected]>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <[email protected]>
Make varable drivers (reg vectors and real) propagate their initial
values using a special init scheduler queue. This causes the net to
be loaded with reasonable initial values.
Signed-off-by: Stephen Williams <[email protected]>
Non-constant indexed part select in continuous assignment generates
a select node with the correct width. In the process factor out and
share some of the part select calculations with expr part select
handling methods.
Signed-off-by: Stephen Williams <[email protected]>
Words of net arrays were incorrectly added to the scope. They should
only be attached to the array, and accessed as a word of the array.
Signed-off-by: Stephen Williams <[email protected]>
Real value are vector width of 1, fix real literal to reflect this.
fix leaking real registers in code generation for function arguments.
Load of signal should handle conversion from real to vector. Function
arguments, type vector passed a real value, are an example where this
comes up.
Signed-off-by: Stephen Williams <[email protected]>
Backslash-escapes are processed early, during elaboration, so that
escaped characters show up in all places with the calculated value.
This means the $display formatting will get processed strings and
should not process back-slashes again.
Signed-off-by: Stephen Williams <[email protected]>
Parameter expressions that do not otherwise have a size should
evaluate expressions losslessly, expanding as necessary to prevent
overflow of data.
Signed-off-by: Stephen Williams <[email protected]>
Arrays of nets that have all their words collapsed together can become
a collapsed array as a whole. Add support for this case in the vvp code
generator and runtime.
more general concept of arrays. The NetMemory and NetEMemory
classes are removed from the ivl core program, and the IVL_LPM_RAM
lpm type is removed from the ivl_target API.
including assing, cassign and force.
Generate NetConcat devices for gate outputs that feed into a
vector results. Use this to hande gate arrays. Also let gate
arrays handle vectors of gates when the outputs allow for it.
Add a vvp_event_anyedge class to handle the special
case of .event statements of edge type. This also
frees the posedge/negedge types to handle all 4 inputs.
Implement table functor recv_vec4 method to receive
and process vectors.
2) adds acc_compare_handle, acc_fetch_range, acc_next_scope and
tf_isetrealdelay, acc_handle_scope
3) makes acc_next reentrant
4) adds basic vpiWire type support
5) fills in some acc_object_of_type() and acc_fetch_{full}type()
6) add vpiLeftRange/RigthRange to signals
as well as a user specified log file, set log
file to buffer lines.
Add vpi_flush function, and clear up some cunfused
return codes from other vpi functions.
Adjust $display and vcd/lxt messages to use the
standard output/log file.
acc_ functions. Add support for standard ACC
string handling.
Add the _pli_types.h header file to carry the
IEEE1364-2001 standard PLI type declarations.
scaled to the local units. Change the internal
implementation of vpiSystemTime the $time functions
to properly account for this. Also add $simtime
to get the simulation time.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stephen Williams
Martin Whitaker
Gordon McGregor
Cary R
Larry Doolittle
Ole Henrik Jahren
Alexander Klimov
Nick Gasson
Prasad Joshi
Jared Casper
Pawel Szostek
Prasad Joshi
Martin Whitaker
Greg Steuck
Pawel Szostek
Joe Auricchio
Patrick Doyle
Picture Elements Inc
Sreeraj R
nog
Purdea Andrei
Michael Strelnikov
Martin Whitaker
Martin Whitaker
Martin Whitaker
Holger Wächtler
Stephen Williams
GuntherDannoritzer
thiede
J Varshney
Michael
Michael Witten
Gyorgy Jeney
Martic Whitaker
yang yun ju
steve