Add the swift.txt documentation.

swift.txt

@@ -0,0 +1,67 @@
+
+SWIFT MODEL SUPPORT FOR Icarus Verilog (PRELIMINARY)
+
+    Copyright 2003 Stephen Williams
+
+  NOTE: SWIFT support does not work yet, these are provisional
+  instructions, intended to show what's supposed to happen when I get
+  it working.
+
+Icarus Verilog support for SWIFT models is based on the LMTV interface
+module from Synopsys. This module is normally distributed along with
+the SWIFT models proper. This module can be linked with Icarus Verilog
+via the cadpli compatibility object. (See cadpli.txt.)
+
+* Preliminaries
+
+First, you need the LMC_HOME environment variable set to point to the
+installed directory for your SWIFT software. This setup is documented
+in your SWIFT model documentation.
+
+* Compilation
+
+When compiling your Veriog design to include a SWIFT model, you need
+to include wrappers for the model you intend to use. You may choose to
+use ncverilog or verilogxl compatible wrappers, they work the
+same. Locate your smartmodel directory, and include it in your command
+file like so:
+
+     +libdir+.../smartmodel/sol/wrappers/verilogxl
+
+The wrappers directory includes Verilog modules that wrap your SWIFT
+module, and with this +libdir+ statement in your command file, the
+Icarus Verilog compiler will be able to locate these wrappers. The
+wrappers in turn invoke the $lm_model system tasks that are the LMTV
+support for your model.
+
+  NOTE: This example uses the solaris directory of VerilogXL support
+  files as a source of wrappers. The files of interest, however, are
+  written in Verilog and are identical for all supported platforms, so
+  long as you choose the verilogxl or ncverilog files.
+
+* Execution
+
+After your simulation is compiled, run the simulation with the vvp
+command, like this:
+
+      % vvp -mcadpli a.out -cadpli=$LMC_HOME/lib/x86_linux.lib/swiftpli.so:swift_boot
+
+What this command line means is:
+
+	-mcadpli
+	   Include the cadpli compatibility module
+
+	a.out
+	   This is your compiled vvp file
+
+	-cadpli=$LMC_HOME/lib/x86_linux.lib/swiftpli.so:swift_boot
+	   This tells the cadpli module to load the swiftpli.so
+	   shared object, and boot it. This is code that comes with
+	   your SWIFT modules, and provides the generic SWIFT
+	   capabilities (lm_* system tasks) needed by the module
+	   itself.
+
+Once you start the vvp command, the SWIFT infrastructure will be
+initialized as part of the simulation setup, and all should work
+normally from here.
+