luke
/
OpenRAM
mirror of https://github.com/VLSIDA/OpenRAM.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
2,850 Commits 4 Branches 63 Tags 78 MiB
Commit Graph

2482 Commits

Author SHA1 Message Date
jcirimel ed54c7ab83 Merge branch 'dev' of https://github.com/VLSIDA/PrivateRAM into dev 2020-04-16 16:48:07 -07:00
mrg 8ece411954 Merge branch 'dev' into tech_migration 2020-04-16 11:32:02 -07:00
mrg 843e9414df Parameterize vdd and gnd pin in write driver array. 2020-04-16 11:28:35 -07:00
mrg 770533e7b1 Parameterize vdd and gnd pin in sense amp array. 2020-04-16 11:27:26 -07:00
mrg d1319d633d Don't widen too short wires either 2020-04-16 11:02:54 -07:00
jcirimel 24e0e326d4 merge dev in to disc... 2020-04-16 02:18:39 -07:00
jcirimel ebb1a7bedb merge local with dev 2020-04-16 02:16:56 -07:00
mrg b347e3f7a8 Try both layers for reversed layer stacks. 2020-04-15 16:49:04 -07:00
mrg 9d2902de9e Conditional well spacing 2020-04-15 15:55:49 -07:00
mrg 94eb2afa36 Change to callable DRC rule. Use bottom coordinate for bus offsets. 2020-04-15 15:29:55 -07:00
mrg e95c97d7a5 PEP8 cleanup 2020-04-15 14:29:43 -07:00
mrg 1564d6e02b PEP8 cleanup 2020-04-15 11:24:28 -07:00
mrg 43fe1ae023 Improve pitch computation 2020-04-15 11:16:45 -07:00
mrg 331a4f4606 Fix wire width bug in short jogs. PEP8 cleanup. 2020-04-15 09:48:42 -07:00
jcirimel 6c1c72c520 fix pgates binning off-by-one 2020-04-15 04:09:58 -07:00
mrg 0941ebc3da Fix well spacing issue 2020-04-14 14:08:07 -07:00
mrg 32d190b8b1 Jog connection on M1 for bank select. 2020-04-14 12:15:56 -07:00
mrg 43dcf675a1 Move pnand outputs to M1. Debug hierarchical decoder multirow. 2020-04-14 10:52:25 -07:00
jcirimel 5f4ed47c57 netlist only discrete simulating 2020-04-13 20:48:34 -07:00
Aditi Sinha 2661a42726 changes to support spare columns 2020-04-14 03:09:10 +00:00
jcirimel afcb5174ac discrete dff tests working 2020-04-11 01:19:04 -07:00
mrg 2e67d44cd7 First pass of multiple bitcells per decoder row 2020-04-10 13:29:41 -07:00
jcirimel a0eb9839ad revert units on sp_lib, begin discrete tx simulation 2020-04-09 19:39:21 -07:00
mrg 7888e54fc4 Remove dynamic bitcell multiple detection. 
Check for decoder bitcell multiple in tech file or assume 1.
PEP8 fixes.
 2020-04-09 11:38:18 -07:00
Matt Guthaus 75bd2b46a5 OpenRAM v1.1.5 2020-04-09 10:02:15 -07:00
mrg 8a55c223df Use single height for netlist_only mode 2020-04-09 09:48:54 -07:00
mrg 58fbc5351a Change rows to outputs in hierarchical decoder 2020-04-08 17:05:16 -07:00
mrg 745450fadc Syntax error 2020-04-08 17:04:50 -07:00
mrg cddfaa0dc8 Tech dependent fudge factor 2020-04-08 17:04:14 -07:00
mrg ade3b78711 Add exception errors file 2020-04-08 16:55:45 -07:00
mrg 0c27942bb2 Dynamically try and DRC decoder for height 2020-04-08 16:45:28 -07:00
Hunter Nichols 4103745de2 Merged with dev, fixed conflict in ptx 2020-04-08 02:33:05 -07:00
Hunter Nichols 95363856e4 Added logical effort and input load for ptx module. 2020-04-08 02:29:57 -07:00
mrg 7872b6a68c Merge branch 'dev' into tech_migration 2020-04-07 10:42:05 -07:00
mrg a3797094d0 Swap lvs and sp dimensions for s8 2020-04-07 10:37:49 -07:00
mrg c8c74e8b69 Fix lvs_write in sram class 2020-04-06 15:20:59 -07:00
mrg f20246abdc Merge branch 'dev' of github.com:VLSIDA/PrivateRAM into dev 2020-04-06 14:08:45 -07:00
mrg cd8dc8e20b Output lvs model instead of spice model 2020-04-06 14:08:38 -07:00
mrg a12b5d9e6c Split decoder pbitcell tests 2020-04-06 13:31:31 -07:00
Jesse Cirimelli-Low b59c789dec remove whitespace 2020-04-05 03:58:26 -07:00
Jesse Cirimelli-Low beef9441b7 fix pin check debug typo 2020-04-05 02:55:15 -07:00
Jesse Cirimelli-Low 8b33cb519f Merge branch 'dev' into custom_mod 2020-04-03 17:05:56 -07:00
mrg ab5dd47182 Ptx is in microns if lvs_lib exists 2020-04-03 14:06:56 -07:00
mrg f358de78bb Add optional lvs_lib netlists for LVS usage (sp_lib is for simulation) 2020-04-03 13:39:54 -07:00
mrg 8603d3edd6 PEP8 cleanup 2020-04-03 11:37:06 -07:00
mrg 2850b9efb5 Don't force check in lib characterization. PEP8 formatting. 2020-04-02 12:52:42 -07:00
mrg f105c9ab36 Netlist only in verilog test 2020-04-02 12:43:19 -07:00
mrg 1d5e5e3607 Don't run lvs/drc or route supplies in verilog test 2020-04-02 12:42:28 -07:00
mrg 67de7efd49 Fix syntax error. No DRC/LVS in netlist only mode. 2020-04-02 11:31:28 -07:00
mrg 9106e22b58 Fix typo and syntax error. 2020-04-02 10:37:21 -07:00
mrg 5349323acd PEP8 cleanup. DRC/LVS returns errors. 2020-04-02 09:47:39 -07:00
mrg 0d6c84036d Adjust fudge factor for pin spacing. 2020-04-02 09:47:13 -07:00
mrg a3683c5898 Separate pbitcell from hierarchical decoder 2020-04-01 16:39:47 -07:00
mrg a9d3548be1 Refactor drc/lvs error output 2020-04-01 15:54:06 -07:00
Jesse Cirimelli-Low cdf0315a90 Merge branch 'dev' into custom_mod 2020-04-01 15:35:33 -07:00
mrg 3b662026d2 pnand3 constant hack for input separation 2020-04-01 11:36:04 -07:00
mrg 7956b63d9f Add licon option to precharge 2020-04-01 11:26:45 -07:00
mrg 3e41664db6 Split precharge array to multiport and normal cell 2020-04-01 11:26:31 -07:00
mrg 3074cf3b86 Small format cleanup 2020-04-01 11:15:29 -07:00
mrg da334e47aa Separate pbitcell tests for precharge 2020-04-01 11:14:50 -07:00
mrg bc9cbe70a7 Poly overlap doesn't convert to tx device 2020-04-01 09:42:07 -07:00
Jesse Cirimelli-Low 6e2a5d7a1a set sram output cap in characterizer to be 4x dff input cap 2020-04-01 04:24:43 -07:00
mrg d916322b74 PEP8 updates 2020-03-31 10:15:46 -07:00
Joey Kunzler b0d2946c80 update to sense amp and write driver modules 2020-03-30 20:00:32 -07:00
mrg 9907daaffa Min area only for multiple layers 2020-03-26 13:05:02 -07:00
mrg d2c97d75a7 Add well contact and min area to power pin of precharge 2020-03-26 11:49:32 -07:00
mrg 1e3734cb26 Hack to fix pnand3 in freepdk45 2020-03-26 11:08:53 -07:00
Jesse Cirimelli-Low 341bde7a48 Merge branch 'dev' into custom_mod 2020-03-26 02:40:37 -07:00
mrg 2f353187ba Skywater extraction mode for si unit scales 2020-03-24 12:41:15 -07:00
mrg 1e2163c3a6 Hack for pnand3 pin spacing 2020-03-24 12:40:41 -07:00
mrg e9d0db44fd Add li_stack contact to ptx and pgate if it exists. 2020-03-23 16:55:38 -07:00
mrg f491876a5a Move up B input in pnor2 2020-03-23 13:49:08 -07:00
mrg c15b4167b6 Merge branch 'dev' into tech_migration 2020-03-23 11:57:03 -07:00
mrg f598a359d5 Remove unused contact in pnor2 2020-03-23 11:55:17 -07:00
mrg 717cbb0fe5 Remove unused contact in pnand3 2020-03-23 11:52:19 -07:00
mrg 0ee6963198 Remove unused contact in pnand2 2020-03-23 11:46:21 -07:00
mrg f21791a904 Add source drain contact options to ptx. 2020-03-23 11:36:45 -07:00
Aditi Sinha b75eeb7688 Merge branch 'dev' into bisr 2020-03-22 21:58:04 +00:00
Aditi Sinha a5afbfe0aa Fixed errors in extra rows characterization 2020-03-22 20:54:49 +00:00
mrg 9df99beb28 Merge branch 'tech_migration' into dev 2020-03-06 15:03:46 -08:00
mrg fd7af7fc25 Matt sucks skip test 2020-03-06 15:03:31 -08:00
mrg c5a1be703c Rotate via and PEP8 formatting 2020-03-06 13:39:46 -08:00
mrg 23501c7b35 Convert pnand+pinv to pand in decoders. 2020-03-06 13:26:40 -08:00
mrg 1a2efd77ad Move rbl route away from bitcell array 2020-03-06 09:48:20 -08:00
mrg ee18f61cbf Route RBL to edge of bank. 2020-03-06 09:03:52 -08:00
mrg 05f9e809b4 PEP8 Formatting 2020-03-05 16:27:35 -08:00
mrg 6506622dfb PEP8 Formatting 2020-03-05 16:20:21 -08:00
mrg 5b23653369 PEP8 Formatting 2020-03-05 16:13:49 -08:00
mrg ad98137cd4 Merge branch 'dev' into tech_migration 2020-03-05 14:18:06 -08:00
mrg 5312629702 Remove jog in precharge. Jog is in port data 2020-03-05 12:10:13 -08:00
mrg 9c1f0657dd PEP8 Formatting 2020-03-05 11:58:36 -08:00
mrg 7adeef6c9e PEP8 Formatting 2020-03-05 10:21:18 -08:00
mrg 287a31f598 Precharge updates. 
Enable different layers for bitlines.
Jog bitlines to fit precharge transistors for close proximity bitlines.
PEP8 cleanup.
 2020-03-04 17:39:11 -08:00
Joey Kunzler d7529ce526 Vdd/gnd via stacks now use perferred directions, added cell property to override 2020-03-04 17:05:19 -08:00
mrg 7ba9e09e12 Incomplete precharge layer decoupling 2020-03-04 22:23:05 +00:00
Jesse Cirimelli-Low f62016ad9f revert dff_buf for no body contact 2020-03-03 12:40:08 +00:00
mrg bb2305d56a PEP8 format fixes 2020-02-28 18:24:39 +00:00
mrg e1b97f58e1 Add instance center location 2020-02-28 18:24:09 +00:00
mrg 0b73979388 Space inputs by M1 pitch 2020-02-28 18:23:49 +00:00
mrg 073bd47b31 Add source/drain/gate to structure 2020-02-28 18:23:36 +00:00
Matt Guthaus 1617840ed3 Merge branch 'dev' of github.com:VLSIDA/PrivateRAM into dev 2020-02-27 08:50:19 -08:00
mrg 266d68c395 Generalize pgate width based on nwell/pwell contacts 2020-02-25 17:09:07 +00:00
Matt Guthaus 0db0c5a3a9 Update version to 1.1.4 2020-02-25 08:09:08 -08:00
mrg e80677caf7 Merge remote-tracking branch 'origin/dev' into tech_migration 2020-02-25 00:36:43 +00:00
mrg 254e584e35 Cleanup and simplify ptx for multiple technologies 2020-02-25 00:36:22 +00:00
mrg 585a708e0c Generalize y offsets in pnand3 2020-02-25 00:36:02 +00:00
mrg d565c9ac72 Generalize input y offsets 2020-02-25 00:35:32 +00:00
mrg 6bcffb8efb Change default cell height and fix contact width error 2020-02-25 00:34:59 +00:00
mrg 35110a4453 Improve debug of non-manhattan error 2020-02-25 00:34:28 +00:00
Joey Kunzler 4c9b3c5864 Merge branch 's8_update' into dev 
Add lpp to addText(), remove reference to specific technology in gdsMill
 2020-02-24 14:02:18 -08:00
Bastian Koppelmann 0e641bf905 Remove write_driver_array.py.orig 
this was the remainder of applying a diff using "patch". To avoid this
mistake, add the filetypes created by "patch" to the .gitignore.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-21 13:29:43 +01:00
Joey Kunzler c9cb387912 fixed variable typo 2020-02-20 18:35:54 -08:00
Aditi Sinha 694ea5c20e Characterization for extra rows 2020-02-20 17:31:58 +00:00
Aditi Sinha 34939ebd70 Merge branch 'dev' into bisr 2020-02-20 17:09:09 +00:00
Matt Guthaus da4c69ab98 Merge branch 'pin-pull3' into dev 2020-02-20 09:07:58 -08:00
Aditi Sinha 88bc1f09cb Characterization for extra rows 2020-02-20 17:01:52 +00:00
Hunter Nichols c1cb6bf512 Changed layout input names of s_en AND gate to match the schematic 2020-02-19 23:32:11 -08:00
Joey Kunzler d6987ac584 added purposes to addText(), removed reference to specific tech from gdsMill 2020-02-19 16:26:52 -08:00
Hunter Nichols df2f981a34 Adds checks to prevent characterization of redundant corners. 2020-02-19 15:59:26 -08:00
Hunter Nichols e4fef73e3f Fixed issues with bitcell measurements variable names, made target write ports required during characterization 2020-02-19 15:34:31 -08:00
Hunter Nichols 843fce41d7 Fixed issues with sen control logic for read ports. 2020-02-19 03:06:11 -08:00
Bastian Koppelmann 76256a2f1b sense_amp: Allow custom pin names 
we don't want to propagate the sense amp's bl/br names out of the
sense_amp_array. Thus the sense_amp_array gets them named as
"bl"/"br" again.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 15:20:12 +01:00
Bastian Koppelmann 680dc6d2c7 sense_amp/array: Remove hardcoded pin names 
all pin names should be wrapped into a function/property. This ensures
that there is exactly one place to change the name.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 15:20:06 +01:00
Bastian Koppelmann 9a12b68680 write_driver: Allow custom pin names 
we don't want to propagate the write driver bl/br names out of the
write_driver_array. Thus the write_driver_array gets them named as
"bl"/"br" again.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:25:00 +01:00
Bastian Koppelmann c06cb2bfc2 write_driver/array: Remove hardcoded pin names 
all pin names should be wrapped into a function/property. This ensures
that there is exactly one place to change the name.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:23:26 +01:00
Bastian Koppelmann 656fdd1008 port_data: Refactor channel_route/connect_bitlines() 
both functions share a lot of code and are passing around a lot of data
under similar names (inst1, inst1_start_bit, inst1_bl_name, ...). Thus
we group all these elements in a named tuple to ease passing around
these elements.

All callers of channel_route/connect_bitlines() either pass in the bl/br
names or rely on "br_{}"/"bl_{}" as defaults. These hard coded values
should be determined by the instances. Thus we get the bitline names
based on the instances passed in. The callers only provide a template
string, to take care of the case that bitlines are called "bl_out_{}".

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:20:03 +01:00
Bastian Koppelmann 5e1f64c8f9 modules/port_data: Add get_bl/br_name method 
if we rely on the names of the submodules (sense_amp_array,
write_driver_array, etc.) for port_data's pins, we get into trouble on
multiport SRAMs. To avoid this we use explicit names for br/bl depending
on the port number in port_data. Now each submodule does no longer need to
figure out the right name depending on the port number.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:18:32 +01:00
Joey Kunzler 125bcafb3e fixed purposes for gdsMill 2020-02-15 15:00:30 -08:00
Bastian Koppelmann 87b5a48f9e bitcell: Remove hardcoded signal pins 
use names provided by the tech file, which can be overriden by the
technology.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:51 +01:00
Bastian Koppelmann c97bad72db custom_cell_properties: Add bitcell pin name API 
this allows users to overrride the pin names to match the names of their
GDS.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:51 +01:00
Bastian Koppelmann f6302caeac replica_bitcell_array: Connect bitcells based on bitcell bl/br/wl names 
this allows us to override the bl/br/wl names of each bitcell.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:47 +01:00
Bastian Koppelmann f9babcf666 port_data: Each submodule now specifies their bl/br names 
before the names of bl/br from the bitcell were assumed. If we want to
allow renaming of bl/br from bitcells, we have to seperate the other
modules from that. Note, that we don't touch every occurence of bl/br,
but only the once necessary that pin renaming of the bitcell works.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:00:50 +01:00
Bastian Koppelmann 64bf93e4e5 bank: Connect instances by their individual bl/br names 
each module should be able to state how their bl/br lines are named. Here we
always connect port_data with the bitcell_array, so port_data needs function
that return the names of bl/br.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:00:50 +01:00
Jesse Cirimelli-Low a23f72d5a3 Merge branch 'dev' of https://github.com/VLSIDA/PrivateRAM into dev 2020-02-12 06:54:03 +00:00
Jesse Cirimelli-Low aedbc5f968 merge custom cell and module properties 2020-02-12 04:09:40 +00:00
mrg 5928a93772 Merge branch 'dev' into tech_migration 2020-02-10 22:42:50 +00:00
mrg 0ef06ec1e1 Fix dff_buf width in netlist_only mode 2020-02-10 20:06:34 +00:00
mrg 6bf33a980f Add conservative well spacing between library FF and our pgates. 2020-02-10 19:28:30 +00:00
mrg f7915ec55e Route to top of NMOS to prevent poly overlap nmos 2020-02-10 17:12:39 +00:00
jcirimel 101eb28112 revert example scn4m to non netlist only 2020-02-09 23:52:11 -08:00
jcirimel 27eced1fbe netlist_only done 2020-02-09 23:51:01 -08:00
jcirimel 7038fad930 s8 gdsless netlist only working up to pdriver 2020-02-09 23:10:33 -08:00
jcirimel b212b3e85a s8 gdsless netlist only working up to dff array 2020-02-09 21:37:09 -08:00
mrg 4d85640a00 Change col addr spacing to col addr size 2020-02-07 22:20:16 +00:00
mrg 2ff058f5d5 PEP8 Cleanup and reverse pitch offset of col addr routing 2020-02-06 22:59:30 +00:00
mrg 4b06ab9eaf Move port 2 column address bus down. 
PEP 8 cleanup.
 2020-02-06 19:46:10 +00:00
mrg 5e514215d5 Force vertical vias on pnand3 2020-02-06 16:44:19 +00:00
mrg f0ecf385e8 Nwell fixes in pgates. 
Fix minor PEP8 format fixes.
Fix nwell to be 55% of cell height.
Move contact in hierarchical decoder for DRC error.
 2020-02-06 16:20:09 +00:00
Jesse Cirimelli-Low b107934672 fix styling 2020-02-06 12:15:52 +00:00
Jesse Cirimelli-Low 3a06141030 add simple sram sizing for netlist only 2020-02-06 12:10:49 +00:00
mrg 596302d9a9 Update pgate well and well contacts. 
Extend well left and right past a cell boundary.
Use asymmetric well contacts.
 2020-02-05 18:22:45 +00:00
mrg 04d254542d Add general well_extend_active DRC in design class. 2020-02-05 18:22:22 +00:00
mrg 4526986de3 Update contact well support. 
Add asymmetric tap overlap support in DRC rules.
Add static nwell and pwell contact in class for measurements.
 2020-02-05 18:21:01 +00:00
jcirimel 7cb3091140 Merge branch 'dev' of https://github.com/VLSIDA/PrivateRAM into custom_mod 2020-02-04 23:40:54 -08:00
jcirimel ed11145ca4 add custom module file, make dff clk pin dynamic 2020-02-04 23:35:06 -08:00
mrg 304971ff60 Fix ptx so nmos and pmos have same active offset and gates align 2020-02-04 17:38:35 +00:00
mrg 53217e4030 Check min well width in contact and redo position 2020-02-04 17:37:58 +00:00
mrg 5aed893725 Add nwell/pwell tap test 2020-02-03 18:41:06 +00:00
mrg 34c9b3a0a5 Fix well offset computation for PMOS 2020-02-03 17:37:53 +00:00
Jesse Cirimelli-Low 6cf20a0353 add technology based module customization 2020-01-30 19:44:24 +00:00
mrg 400cf0333a Pgates are 8 M1 high by default. Port data is bitcell height. 2020-01-30 03:34:04 +00:00
mrg 0880c393fd Fix base bitcell syntax error. Remove some unused imports. 2020-01-30 01:58:30 +00:00
mrg 79391b84da Cleanup and rename vias. 2020-01-30 01:45:33 +00:00
Matt Guthaus 3147b99ce0 Merge remote-tracking branch 'bkoppelmann/bit-sym' into dev 2020-01-29 11:24:09 -08:00
Bastian Koppelmann b5701af864 column_mux: Allow y axis mirroring 
since the bitlines alternate in the bitcell array we also need to mirror
the port_data elements.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:39 +01:00
Bastian Koppelmann ed66fca031 write_driver/sense_amp/precharge arrays: Allow y axis mirroring 
since the bitlines alternate in the bitcell array we also need to mirror
the port_data elements.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:39 +01:00
Bastian Koppelmann dd1afe0313 Bitcell arrays: Allow mirroring on the y axis 
this allows for bitcells that need to be mirrored on the y axis, like
thin cells. However, the portdata elements also need to be mirrored on
the y axis. Otherwise the router will fail horribly when connecting
bitlines.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:21 +01:00
Bastian Koppelmann df9f351a91 Add custom cell properties to technologies 
this is technology specific database to store data about the custom
design cells. For now it only contains on which axis the bitcells are
mirrored. This is a first step to support thin cells that need to be
mirrored on the x and y axis.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:46:14 +01:00
Bastian Koppelmann 9749c522d1 tech: Make power_grid configurable 
this is the first step to allow engineers, porting technologies, more room
for routing their handmade cells.

For now, we don't allow the specification of power_grids where the lower layer
prefers to be routed vertically. This is due to the router not
connecting some pins properly in that case.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 12:06:34 +01:00
Bastian Koppelmann 90a4a72bba modules: Use add_power_pin API for all modules 
sense_amp_array, write_driver_array, and single_column_mux were the only offenders.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 11:47:49 +01:00
Bastian Koppelmann 988df8ebb9 hierarchy_layout: Add methods to create via stacks 
this allows us to simplify add_power_pin() and gives a clean
API to create vias through multiple layers.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 11:47:32 +01:00
Bastian Koppelmann 3fb2b9c1c3 Bitcell arrays: Create abstract base class 
a lot of functions of dummy- and bitcell-array are either copy-pasted or
have just slight differences. Merge all of those into an abstract base
class such that we don't have too much duplicate code.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 10:59:58 +01:00
Jesse Cirimelli-Low 6e070925b6 update magic for multiport 2020-01-28 02:32:34 +00:00
Jesse Cirimelli-Low 30604fb093 add multiport support for pex labels 2020-01-28 00:28:55 +00:00
Jesse Cirimelli-Low 1a97dfc63e syncronize bitline naming convention betwen bitcell and pbitcell 2020-01-27 11:50:43 +00:00
Jesse Cirimelli-Low d42cd9a281 pbitcell working with bitline adjustments 2020-01-27 10:03:31 +00:00
Matt Guthaus e62beae805 Merge branch 'tech_migration' into dev 2020-01-25 12:03:56 -08:00
mrg 877ea53b7f Fix conflicting boundary name 2020-01-24 21:24:44 +00:00
mrg 71cbe74017 Round middle position fix 2020-01-24 18:00:28 +00:00
mrg aa8f389f28 Add fudge factor to pbitcell wells 2020-01-24 17:45:24 +00:00
Jesse Cirimelli-Low 1062cbfd7f begin fixes to pbitcell, prepare multibank pex 2020-01-24 10:24:29 +00:00
mrg 9beb0f4ece Add separate well design rules. 
Needed to fix various pgates with wells.
Did some cleanup of these gates as well.
 2020-01-23 19:43:41 +00:00
jcirimel 40c01dab85 fix bl in stim file 2020-01-21 01:44:15 -08:00
jcirimel 73691f6054 fix bug in top level bitline label placement 2020-01-21 00:20:52 -08:00
Jesse Cirimelli-Low 5778901cfe pull bitline labels to top level spice 2020-01-20 12:16:30 +00:00
jcirimel 364842569a fix s_en in stim 2020-01-16 12:16:49 -08:00
mrg 306740f0f3 Add empty minarea function 2020-01-16 19:27:59 +00:00
mrg 262782cba0 Remove print, fix compare 2020-01-16 19:27:39 +00:00
mrg a2387da29d PEP format design 2020-01-16 19:26:57 +00:00
mrg ea00258be9 Cleanup contact 2020-01-16 19:26:43 +00:00
jcirimel 075bf0d841 label bitcell in stim, add s_en top level to stim 2020-01-16 03:51:29 -08:00
Jesse Cirimelli-Low 2733c3bf3f fix custom bitcell labeling; fix gds scaling in labeling 2020-01-15 09:00:02 +00:00
Jesse Cirimelli-Low 05ab018ffc strip padding character from gds reading 2020-01-07 00:01:32 +00:00
Bastian Koppelmann 2c610036b2 router/supply_grid_router: Print init time to the user 
this can take considerable amount of time, so the user knows that
useful work is done.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 12:24:14 +01:00
Bastian Koppelmann c0c89e465a vector: Implement hash cache for vector3d and vector 
this gives us a small runtime improvement in the router.

For FreePDK45 word_size=8, num_words=256

Improved
*** Maze routing supplies: 89.8 seconds
** Routing: 279.3 seconds

Non-improved
*** Maze routing supplies: 105.1 seconds
** Routing: 293.5 seconds

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 12:16:10 +01:00
Bastian Koppelmann 7ff5121d8c base/pin_layout: Implement hash cache 
the hash value only depends of the properties 'rect' and 'layer' so we
only compute the hash if those values are changed. Otherwise we just
return the precomputed value. This gives us a major speedup (~10x) if
the hash is used as a key in a dict.

During the grouping of pins in analyze_pins() this gives the best
improvements. For example for FreePDK45 with num_bits=8, num_words=256

Improved
**** Analyzing pins: 20.9 seconds
** Routing: 293.8 seconds
** SRAM creation: 349.8 seconds

Non-improved
**** Analyzing pins: 267.9 seconds
** Routing: 537.5 seconds
** SRAM creation: 592.9 seconds

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 11:39:59 +01:00
Bastian Koppelmann 14e8a26246 base/pin_layout: Make rect and layer properties 
only rect and layer are used to compute the hash for a pin. Having
those as properties allows us to cache the hash value and only update it
if either rect or layer are written.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 11:33:34 +01:00
Jesse Cirimelli-Low 3ab99d7f9c update gds library, generalize geometry reverse transform function 2019-12-24 05:01:55 +00:00
Matthew Guthaus a6f5e59e18 Remove unused layers and simplify layer check to work without it. 2019-12-23 21:49:47 +00:00
Matthew Guthaus 082f575e2a Use active_width in ptx again despite colliding with DRC rule 2019-12-23 21:45:09 +00:00
Matthew Guthaus bec12f5b94 Cleanup. 2019-12-23 21:16:08 +00:00
Matt Guthaus 4ad920eaf7 Small fixes to tech usage. 2019-12-23 08:42:52 -08:00
Matt Guthaus 9ad06a7770 Move write mask vias to center to avoid data pins. 2019-12-20 11:48:27 -08:00
Matt Guthaus 89396698ef Non-preferred via in pnand active 2019-12-20 10:36:14 -08:00
Matt Guthaus 82496a66fe Simplify supply code. 2019-12-20 10:35:57 -08:00
Matt Guthaus 9e8b03d6c2 Merge branch 'dev' into tech_migration 2019-12-19 16:23:22 -08:00
Matt Guthaus d2461e5011 Supply indexing bug resolved. Recompute width/height basted on insts. 2019-12-19 16:19:21 -08:00
Matt Guthaus 0da8164ea6 Remove some unnecessary via directions. 2019-12-19 13:54:50 -08:00
Matt Guthaus b7d78ec2ec Fix ptx active contact orientation to non-default M1 direction. 2019-12-19 12:54:10 -08:00
Bastian Koppelmann 11760a9993 sram_factory: Add check for duplicate module name 
sram_factory cannot handle duplicate module name, thus we bail out and
raise an error if a user attempts that.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-19 16:31:52 +01:00
Bastian Koppelmann 1df16eceb6 sram_factory: Give proper priority to overrides 
modules overridden by the user are the highest priority, then modules
overridden by the technology. If nothing is overriden, use the defaults
from OPTS (if they exist) or use the requested module_type.

This fixes that custom tech_modules could not be used, if they had a default in
OPTS even if the latter was not overridden by the user.

We don't need extra defaults in the tech_modules, as we now only use them,
if they have been overridden by the tech_module.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-19 15:58:00 +01:00
Matt Guthaus 36cb675150 Fix minwidth for multiple via bug. 2019-12-18 09:30:00 -08:00
Bastian Koppelmann fab963701b sram_base: Instantiate "dff_array" and "bank" through sram_factory 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:50 +01:00
Bastian Koppelmann 451ef4d896 sram_factory: Allow a prefered module name 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:47 +01:00
Bastian Koppelmann de6b207798 hierachy_layout: Move number of via arg to add_power_pins() 
this allows custom modules to state how many vias they need
for power rails.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:43 +01:00
Jesse Cirimelli-Low 88d3da0b4a fix control logic pex labels with multiport 2019-12-18 12:45:12 +00:00
jcirimel f0958b0b11 squashed update of pex progress due to timezone error 2019-12-18 03:03:13 -08:00
Matt Guthaus aceaa9fb21 Standardize contact names. 2019-12-17 15:55:20 -08:00
Matthew Guthaus 8e151553e4 Update contact types. 
Use preferred directions in tech files.
Programmatically generate based on interconnect stacks.
 2019-12-17 23:45:07 +00:00
Matthew Guthaus fc4685c7f7 Cleanup. 2019-12-17 23:07:01 +00:00
Matthew Guthaus 449b0a7c28 Make wire test programmatic 2019-12-17 22:36:38 +00:00
Matt Guthaus c025ce6356 Add li to preferred direction 2019-12-17 14:06:23 -08:00
Matt Guthaus 24546461ad Fix over-writing of active spacing rule. 2019-12-17 11:23:59 -08:00
Matt Guthaus ed28b4983b Clean up and generalize layer rules. 
Convert metalN to mN.
Generalize helper constants in modules for
space, width, enclose, etc.
Use layer stacks whever possible.
Try to remove drc() calls in liu of helper constants.
 2019-12-17 11:03:36 -08:00
Matt Guthaus a79d03fef4 Remove poly contact 2019-12-16 17:18:49 -08:00
Matt Guthaus d3a2c46cb9 Remove some contact tests 2019-12-16 17:15:29 -08:00
Matt Guthaus 6058af994c Fix ignore gds files 2019-12-16 15:39:32 -08:00
Matt Guthaus 3eb0dad06a Remove cells from DRC/LVS in the blackbox tech list. 2019-12-16 15:33:30 -08:00
Matt Guthaus acbbbe9403 Make exception more readable. 2019-12-16 12:07:40 -08:00
Matt Guthaus f30d0b9197 Fix KeyError for bitell types. 2019-12-16 12:04:33 -08:00
Matt Guthaus 5176a70f84 Add comments to module importing routines 2019-12-16 10:21:24 -08:00
Matt Guthaus 2a9129ef45 Small fix to tech and config over-rides 2019-12-16 10:11:26 -08:00
Matt Guthaus be4893839b Remove old drc/lvs override name 2019-12-16 10:05:52 -08:00
Bastian Koppelmann 306c0b92c3 globals: Add tech module path to Pythonpath if it exists 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-16 16:56:16 +01:00
Bastian Koppelmann 74cd4f989d Remove hardcoded module class names 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-16 16:56:06 +01:00
Bastian Koppelmann 233ec010ff modules: Create a class that wraps all the module class names 
this removes hard coded values from the module instatiations. It also allows
users to override certain modules with their custom cells.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-16 16:51:38 +01:00
Matt Guthaus f71cfe0d9d Generalize active and poly stacks 2019-12-13 14:56:14 -08:00
Matt Guthaus e143a6033f Use layer stacks from tech file in design class and throughout 2019-12-13 14:13:41 -08:00
Matt Guthaus 8d3f1d19cb Fix missing rule 2019-12-11 18:02:32 -08:00
Matt Guthaus 76f7019432 Merge branch 'dev' into tech_migration 2019-12-11 17:59:51 -08:00
Matt Guthaus e048ada23c Abstract basic DRC checks 2019-12-11 17:56:55 -08:00
Matt Guthaus f9a66e86b4 Add npc option to contact 2019-12-11 09:09:59 -08:00
Matt Guthaus 31de5ab87e Merge remote-tracking branch 'bkoppelmann/master' into dev 2019-12-11 08:46:52 -08:00
Bastian Koppelmann 928b02aa1f gdsMill: Fix reader/writer ignoring the 'DATATYPE' of 'PATH' records 
most readers (like KLayout/Calibre) will not open gds files omiting the
DATATYPE.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-11 10:47:38 +01:00
Aditi Sinha 5b3846e1e5 Changed replica bitcell array to work with bank tests for non power of two rows 2019-12-08 13:24:39 +00:00
Matt Guthaus 4a1b10ff0d Remove extra cast 2019-12-05 21:33:13 -08:00
Matthew Guthaus f3286fb0c2 Don't add boundary to ptx 2019-12-06 02:37:12 +00:00
Matthew Guthaus 5af22b79e2 Only add boundary for if there's a DRC stdc layer 2019-12-06 02:17:58 +00:00
Matt Guthaus 53c72c6054 Merge branch 'tech_migration' of github.com:VLSIDA/PrivateRAM into tech_migration 2019-12-05 15:41:56 -08:00
Matt Guthaus d150b165de Merge branch 'tech_migration' of github.com:VLSIDA/PrivateRAM into tech_migration 2019-12-05 15:38:29 -08:00
Matt Guthaus b1d8a35aa7 Add contact variation 2019-12-05 15:38:25 -08:00
Matthew Guthaus 3deeaf7164 Decrease verbosity of boundary layer 2019-12-05 23:33:23 +00:00
Matthew Guthaus 7397f110c5 Add bbox for special DRC rule boundary 2019-12-05 23:14:25 +00:00
Matthew Guthaus 8f473b26a9 Add replica bitcell test for 1 port 2019-12-05 01:14:06 +00:00
Matthew Guthaus d519c00aa1 Fix contact order in test 2019-12-05 01:06:31 +00:00
Matt Guthaus 69bb245f28 Updates to gdsMill/tech layers 
Create active and poly contact types.
Define standard cell boundary option.
DataType and PurposeLayer are the same. Text must have type 0.
Remove vector from vlsiLayout. More debug in reader.
 2019-12-04 16:12:53 -08:00
Matt Guthaus 0d35941241 Fix missing dbUnit conversion in gdsMill 2019-12-03 12:06:58 -08:00
Matt Guthaus 7b9e7ff35b Nominal corner only for sim tests. Netlist only for speed. 2019-11-30 12:48:25 -08:00
Matt Guthaus 615c24f7bc Merge branch 'dev' into tech_migration 2019-11-30 12:38:35 -08:00
Matt Guthaus 6ef1b6a4ec Blackbox option for DRC waivers 2019-11-29 15:50:32 -08:00
Matt Guthaus 46c2cbd2d9 Check nominal_corner_only in new corner creation routine 2019-11-29 14:47:02 -08:00
Matt Guthaus bedae87315 Only use max/min and typical corner 2019-11-29 13:31:44 -08:00
Matt Guthaus 2a912dab7a Remove unused config files 2019-11-29 12:35:35 -08:00
Matt Guthaus 0cdd3af1aa Change default nominal corners to false and enable in test config. 2019-11-29 12:08:53 -08:00
Matt Guthaus d511f648c6 Move DRC/LVS/PEX tools to tech file. 2019-11-29 12:01:33 -08:00
Matt Guthaus abd8b0a23a Only setup bitcell when running top-level OpenRAM 2019-11-26 13:54:37 -08:00
Matt Guthaus b71d630643 None for layer means unused. 2019-11-26 13:34:39 -08:00
Matt Guthaus 04045cf672 Fix syntax error 2019-11-26 13:24:19 -08:00
Matt Guthaus f4599b7121 Default tools are calibre except for SCMOS 2019-11-26 13:23:18 -08:00
Matt Guthaus 102758881a Use layer instead of special flags for wells 2019-11-26 13:22:52 -08:00
Matt Guthaus 909321326d Ignore unused layers 2019-11-26 13:21:29 -08:00
Matt Guthaus 67a0928303 Merge branch 'dev' into tech_migration 2019-11-21 11:02:33 -08:00
Matt Guthaus 982e12be5e Increment minor version 2019-11-21 11:00:22 -08:00
Matt Guthaus 807923cbf1 Ignore pycache dirs. Fix output error message. 2019-11-21 10:11:19 -08:00
Matt Guthaus 190c5a078e Fix permissions on pwrite_driver test 2019-11-20 11:49:39 -08:00
Matt Guthaus 3364f47e56 Fix wrong supply voltage in config files. 2019-11-20 09:50:27 -08:00
Matt Guthaus 240c416100 Remove extra print 2019-11-17 10:40:01 -08:00
Matthew Guthaus cdf01c6c23 Fix test 30 for generic configs 2019-11-17 00:49:38 +00:00
Matthew Guthaus b3fb4e3183 Make unit test configs generic to tech_name 2019-11-17 00:44:31 +00:00
Matthew Guthaus b3b3cf0210 Merge remote-tracking branch 'origin/dev' into tech_migration 2019-11-17 00:15:18 +00:00
Matthew Guthaus aca99b87bc Fix config for tests 30 2019-11-16 22:22:30 +00:00
Matthew Guthaus 0b3d2fe9de Undo pdriver size change for now. 2019-11-16 19:54:39 +00:00
Matthew Guthaus c4cf8134fe Undo changes for config expansion. Change unit tests to use OPENRAM_HOME. 2019-11-15 18:47:59 +00:00
Aditi Sinha 2c7aa5d0da Non-power of 2 address decode tentative 2019-11-15 03:59:57 +00:00
Matthew Guthaus 7e9d08206c Fix config import to be location independent 2019-11-14 20:18:18 +00:00
Matthew Guthaus 131f4bda4a Add layer-purpose GDS support. Various PEP8 fixes. 2019-11-14 18:17:20 +00:00
Matthew Guthaus bba6995653 Call debugger if debug_level more than 0 and an error. 2019-11-08 19:42:09 +00:00
Matthew Guthaus 8d158e9eb5 Fix lpp change 2019-11-08 15:45:25 +00:00
Matthew Guthaus 32f1cde897 PEP8 formatting 2019-11-07 16:48:37 +00:00
Matthew Guthaus 0dea153919 PEP8 formatting 2019-11-07 16:33:13 +00:00
Matthew Guthaus a2422cc8d4 Sometimes round down pdriver to fix polarity 2019-11-06 21:51:21 +00:00
Matthew Guthaus 35e65fc6f2 PEP8 wordline driver 2019-11-06 21:19:36 +00:00
Matthew Guthaus 04af5480d2 Add skeleton files for pwrite_driver 2019-10-30 21:34:03 +00:00
Matt Guthaus 38213d998f Add separate layer and purpose pairs to tech layers. 2019-10-25 10:03:25 -07:00
Matt Guthaus 764d4da1bd Clean up config file organization. Improve gdsMill debug output. 2019-10-23 10:48:18 -07:00
Matt Guthaus ccc6a67021 Update version to 1.1.2 2019-10-07 12:28:02 -07:00
Matt Guthaus 84c7146792 Fix some pep8 errors/warnings in pgate and examples. 2019-10-06 17:30:16 +00:00
vagrant 67c768d22c Refactor bitcell to bitcell_base. Pep8 format bitcells. 2019-10-06 01:08:23 +00:00
Hunter Nichols d722311822 Merge branch 'dev' into update_scmos_models 2019-10-03 13:16:32 -07:00
mrg d583695959 Remove some flake8 errors/warnings. 2019-10-02 23:26:02 +00:00
Hunter Nichols b420f77ff1 Updated leakage power golden data in hspice delay test. 2019-10-01 15:26:34 -07:00
Hunter Nichols 19a09470d4 Merged with dev, conflict in golden data of hspice delay test. 2019-10-01 14:26:34 -07:00
Hunter Nichols 7b029a4582 Updated golden values in delay tests due to model changes. 2019-09-30 14:02:00 -07:00
Matt Guthaus b0dcfb5b2d Fix leakage mismatch in results. 2019-09-27 15:14:01 -07:00
Matt Guthaus 289d3b3988 Feedthru port edits. 
Comment about write driver size for write through to work, but
disable write through in functional simulation.
Provide warning in Verilog about write throughs.
 2019-09-27 14:18:49 -07:00
Matt Guthaus cbbcb97a10 Merge branch 'dev' into feedthru 2019-09-27 09:42:51 -07:00
Matt Guthaus 99507ba5c5 Remove rbl_bl_delay_bar from w_en logic inputs. 2019-09-07 23:22:01 -07:00
Matt Guthaus 9ec663e0b1 Write all write ports first cycle. Don't check feedthru. 2019-09-07 20:20:44 -07:00
Matt Guthaus 35a8dd2eec Factor out masking function 2019-09-07 20:05:05 -07:00
Matt Guthaus 322af0ec09 Remove sense enable during writes 2019-09-07 20:04:48 -07:00
Matt Guthaus e5db02f7d8 Fix wrong function. Except unknown ports. 2019-09-06 14:59:23 -07:00
Matt Guthaus 93c89895c9 Remove unused test structures 2019-09-06 14:58:47 -07:00
Matt Guthaus b5b0e35c8a Fix syntax error. 2019-09-06 12:29:28 -07:00
Matt Guthaus 86c22c8904 Clean and simplify simulation code. Feedthru check added. 2019-09-06 12:09:12 -07:00
Matt Guthaus 6bee66f9dc Forgot to add cs_bar to rw port rails. 2019-09-06 09:29:23 -07:00
Matt Guthaus 969cca28e4 Enable sensing during writes. Need to add dedicated test. 2019-09-06 07:16:50 -07:00
jsowash 1c65b90c70 Merge branch 'dev' into add_wmask 2019-09-05 09:15:05 -07:00
Matt Guthaus 678b2cc3fa Fix functional test clk name 2019-09-04 18:59:08 -07:00
Matt Guthaus 4c3b171b72 Share nominal temperature and voltage. Nominal instead of typical. 2019-09-04 16:53:58 -07:00
jsowash 8c33749223 Uncommented offset_all_coordinates. 2019-09-04 16:41:27 -07:00
jsowash febc053587 Moved SRAM macro in LEF file to origin and removed poly. 2019-09-04 16:11:12 -07:00
Matt Guthaus 585ce63dff Removing unused tech parms. Simplifying redundant parms. 2019-09-04 16:08:18 -07:00
Matt Guthaus 8c601ce939 Model tests don't need layout 2019-09-04 16:06:12 -07:00
Matt Guthaus c5568e86fe Enable spice and don't purge option to test 30 2019-09-04 14:33:25 -07:00
jsowash fbecb9bc02 Added poly to LEF files. 2019-09-04 14:06:17 -07:00
jsowash d6e7047e2f Added metal4 to lef files since it's now used with a wmask. 2019-09-04 13:04:51 -07:00
Matt Guthaus eadb5d5e48 Allow gds file for front end with new options 2019-09-04 10:26:54 -07:00
jsowash 496a9919b8 Added wmask as a type group to .lib. 2019-09-04 09:45:11 -07:00
jsowash 452cc5e443 Added wmask to lib.py. 2019-09-04 09:29:45 -07:00
jsowash 1a72070f04 Removed LVS error where w_en went over whole AND array in 2 port. 2019-09-03 17:14:31 -07:00
jsowash 4c40804b8f Moved via in write driver up for 2 port. 2019-09-03 15:14:41 -07:00
jsowash abb86c338b Added port specification. 2019-09-03 14:52:43 -07:00
jsowash dd67490823 Changed routing to allow for 2 write port with write mask. 2019-09-03 14:43:03 -07:00
jsowash 01bdea23ae Merge branch 'add_wmask' of https://github.com/VLSIDA/PrivateRAM into add_wmask 2019-09-03 11:50:57 -07:00
jsowash b5ca417b26 Added fix for column mux lib generation.: 2019-09-03 11:50:39 -07:00
jsowash 4a8ec7a687 Added 2 port test for wmask. 2019-09-03 11:49:37 -07:00
Matt Guthaus 69c5608b53 Allow gds to be written with supplies off. Fix extraction bug with new options. 2019-09-03 11:23:35 -07:00
jsowash e8435d0d83 Added test for picorv32 memory without characterization. 2019-08-30 11:24:20 -07:00
jsowash e3b42430bd Changed max_gap_size_wmask to take into account column ffs. 2019-08-29 17:09:17 -07:00
jsowash bbe235074c Added max gap size for wmask and edited max gap size for data ff's to take into account m3 spacing. 2019-08-29 16:41:58 -07:00
Matt Guthaus a78245786c Merge branch 'add_wmask' of github.com:VLSIDA/PrivateRAM into add_wmask 2019-08-29 16:06:39 -07:00
Matt Guthaus 7fe9e5704d Convert vcg and nets to ordered dict 2019-08-29 16:06:34 -07:00
jsowash 37116ce9d8 Increased spacing between wmask and data dffs. 2019-08-29 16:00:50 -07:00
jsowash c1906ade3f Removed A pin's via connection since it's created in the SRAM level and rearranged the SRAM flip flop creation. 2019-08-29 14:48:13 -07:00
jsowash af3d2af0ec Merge branch 'dev' into add_wmask 2019-08-29 12:56:11 -07:00
jsowash f13c8eae8d Moved column mux ff's to be horizontal with wmask flip flops and adjusted wmask AND array en pin location starting point. 2019-08-29 11:07:42 -07:00
jsowash 5099ff6f6c Changed A/Z pins to copy_layout_pin and made en (B) pin a single pin. 2019-08-29 09:01:35 -07:00
Matt Guthaus 64fc771fc4 Simplify is not None 2019-08-22 15:02:52 -07:00
Matt Guthaus ee2456f433 Merge branch 'add_wmask' into dev 2019-08-22 15:01:41 -07:00
Matt Guthaus bdf29c3a26 Fix non-preferred route width again. This time it is likely right. 2019-08-22 13:57:14 -07:00
Matt Guthaus 560d768010 Fix syntax error in router 2019-08-22 13:46:32 -07:00
Matt Guthaus afaa946f9c Fix width of non-preferred trunk wire 2019-08-22 12:03:38 -07:00
jsowash 27ec617315 Fixed M1.5 error in 8mux tests which came from pdriver. 2019-08-22 09:34:53 -07:00
Matt Guthaus 2ffdfb18a4 Fix trunks less than a pitch in channel route 2019-08-21 17:11:02 -07:00
jsowash a8df5528f9 Added 2 mux test for wmask. 2019-08-21 16:06:36 -07:00
Matt Guthaus 98f526427e Merge branch 'add_wmask' of github.com:VLSIDA/PrivateRAM into add_wmask 2019-08-21 15:33:03 -07:00
Matt Guthaus 9ada9a7dfa Fix pitch in channel router to support M3/M4. 2019-08-21 15:32:49 -07:00
jsowash 737e873923 Changed via direction for via1 in flip flops. 2019-08-21 14:49:54 -07:00
Matt Guthaus 9f54afbf2c Fix capitalization in verilog golden files 2019-08-21 14:29:57 -07:00
jsowash 980760b724 Add preferred direction to via1, routed between supply lines in wmask AND array, and only uses m3 for channel route with a write mask. 2019-08-21 14:02:57 -07:00
Matt Guthaus 5f3ffdb8ba Output name and version in help 2019-08-21 14:00:55 -07:00
Matt Guthaus d0f04405a6 Convert capital names to lower case for consistency 2019-08-21 13:45:34 -07:00
jsowash 4f01eeb3c1 Combined changes to the pin locations and vias. 2019-08-21 12:36:53 -07:00
jsowash c2015335b0 Fixed merge issues. 2019-08-21 11:54:22 -07:00
jsowash 4813c01d56 Moved dff's up and moved wmask_AND/wdriver pins left/down, respectively. 2019-08-21 11:50:28 -07:00
Matt Guthaus b0821a5a0e Re-add simplified power pins on edges 2019-08-21 11:42:56 -07:00
Matt Guthaus b94af3e3fd Add vias for new channel routes 2019-08-21 11:33:43 -07:00
Matt Guthaus f281510828 Merge branch 'add_wmask' of github.com:VLSIDA/PrivateRAM into add_wmask 2019-08-21 11:20:42 -07:00
Matt Guthaus 2b7025335c Use pand2 of correct size. Simplify width checking of AND array. 2019-08-21 11:20:35 -07:00
jsowash 43d45fba98 Moved pwr/gnd pins to the right of the rail. 2019-08-21 10:44:04 -07:00
Matt Guthaus c39b09c736 Merge branch 'add_wmask' of github.com:VLSIDA/PrivateRAM into add_wmask 2019-08-21 10:18:59 -07:00
Matt Guthaus 54ab9440db Use pdriver instead of pinv in pand gates. 2019-08-21 10:18:46 -07:00
jsowash 0cbc4a7acf Moved wmask dff above data dff and changed channel route to m3/m4 for data and m1/m2 for wmask. 2019-08-21 10:07:20 -07:00
Matt Guthaus 53d0544291 Minor cleanup and additional assertion checking. 2019-08-21 08:50:12 -07:00
Matt Guthaus f2568fec80 Change permissions on tests to +x. Add single bank wmask test. 2019-08-21 08:49:46 -07:00
jsowash 71af70a636 Moved pwr/gnd vias and corrected width boundary. 2019-08-20 09:14:23 -07:00
jsowash 316132a33c Sized inverter for number of driven write drivers. 2019-08-19 13:31:49 -07:00
jsowash c19bada8df Performed clean up and added comments. 2019-08-19 08:57:05 -07:00
jsowash a28c9fed8b Fixed bug for more than 2 wmasks and changed test to test 4 wmasks. 2019-08-16 14:27:44 -07:00
jsowash d02ea06ff2 Added method to route between the output of wmask AND array and en of write driver. 2019-08-16 14:12:41 -07:00
jsowash aaa1e3a614 Added change to route wmask en between driver and AND gates. Need to apply it to all cases. 2019-08-16 10:23:51 -07:00
jsowash 92e0671e15 Removed DRC error with AND array in freepdk45 and moved pin on en_{} pin in port data. 2019-08-15 12:36:17 -07:00
jsowash f0f811bad9 Added a condiitonal to only route wmask dff when there's a write size. 2019-08-14 12:40:14 -07:00
jsowash 858fbb062d Placed wmask dff and added connections for wmask pins. 2019-08-14 11:45:22 -07:00
jsowash 0d7170eb95 Created wmask AND array en pin to go through to top layer. 2019-08-14 09:59:40 -07:00
jsowash aa4803f3c4 Increased enable pin's width for larger # of column mux ways. 2019-08-11 15:25:05 -07:00
jsowash 2573b5f48b Fixed merge conflict. 2019-08-11 14:39:36 -07:00
jsowash d259efbcda Connected wdriver_sel between write_mask_and_array and write_driver_array. 2019-08-11 14:33:08 -07:00
Matt Guthaus e5618b88af Don't add sense amp to write only port. Fix write_and None define. 2019-08-11 08:46:36 -07:00
Matt Guthaus d56a972d61 Update ngspice tests due to new version 2019-08-10 17:59:30 -07:00
Matt Guthaus c09005dab9 Redo logic for detecting bad bitlines 2019-08-10 17:32:36 -07:00
Matt Guthaus 6cf7366c56 Gate sen during first half period 2019-08-10 16:30:02 -07:00
Matt Guthaus 8d6a4c74e7 Merge branch 'dev' into control_fix 2019-08-10 13:07:30 -07:00
Matt Guthaus 23676c0f37 Route bl in SRAM write ports too 2019-08-10 12:53:07 -07:00
Matt Guthaus 34d28a19e6 Connect wl_en in all ports to bank. 2019-08-10 12:30:23 -07:00
Matt Guthaus bac684a82a Fix control logic routing. 2019-08-10 08:53:02 -07:00
jsowash d5e331d4f3 Connected en together in write_mask_and_array. 2019-08-09 14:27:53 -07:00
Hunter Nichols 2573d4e7d0 Removed testing code from config file. 2019-08-08 19:27:44 -07:00
Hunter Nichols 1d22d39667 Uncommented tests that use model delays. Fixed issue in sense amp cin. 2019-08-08 18:26:12 -07:00
jsowash 49fffcbc92 Added way to determine length of en pin with wmask in write_driver_array and shortened en to width of driver. 2019-08-08 15:49:23 -07:00
Hunter Nichols d273c0eef5 Merge branch 'dev' into analytical_cleanup 2019-08-08 13:20:27 -07:00
jsowash 0cfa0ac755 Shortened write driver enable pin so that a write mask can be used without a col mux in layout. 2019-08-08 12:57:32 -07:00
jsowash 59e5441aef Added write mask to write driver array 2019-08-08 08:46:58 -07:00
Hunter Nichols 3c44ce2df6 Replaced analytical characterization with graph implementation. Removed most analytical delay functions used by old chacterizer. 2019-08-08 02:33:51 -07:00
Hunter Nichols fc1cba099c Made all cin function relate to farads and all input_load relate to relative units. 2019-08-08 01:57:04 -07:00
Matt Guthaus d36f14b408 New control logic, netlist only working 2019-08-07 17:14:33 -07:00
Matt Guthaus 275891084b Add pand3 2019-08-07 16:33:29 -07:00
Matt Guthaus c2655fcaa9 Update pnor2 to new placement logic 2019-08-07 16:01:05 -07:00
jsowash 9409f60237 Merge branch 'dev' into add_wmask 2019-08-07 09:42:55 -07:00
jsowash abb9af0ea8 Added layout pins for wmask_and_array 2019-08-07 09:33:19 -07:00
jsowash a6bb410560 Begin implementing a write mask layout as the port data level. 2019-08-07 09:12:21 -07:00
Hunter Nichols 6860d3258e Added graph functions to compute analytical delay based on graph path. 2019-08-07 01:50:48 -07:00
Matt Guthaus ae46a464b9 Undo delay changes. Fix bus order for DRC. 2019-08-06 17:17:59 -07:00
Hunter Nichols 2ce7323838 Removed all unused analytical delay functions. 2019-08-06 17:09:25 -07:00
Matt Guthaus a2f81aeae4 Combine rbl_wl and wl_en. Size p_en_bar slower than wl_en. 2019-08-06 16:29:07 -07:00
Hunter Nichols 2efc0a3983 Merge branch 'dev' into analytical_cleanup 2019-08-06 14:51:30 -07:00
Matt Guthaus ad35f8745e Add direction to pins of all modules 2019-08-06 14:14:09 -07:00
Matt Guthaus c3f38a5cac ngspice delays updated (again) 2019-08-05 16:09:27 -07:00
Matt Guthaus aae8566ff2 Update golden delays. Fix uninitialized boolean. 2019-08-05 15:45:59 -07:00
Matt Guthaus 4d11de64ac Additional debug. Smaller psram func tests. 2019-08-05 13:53:14 -07:00
Matt Guthaus e4532083da Increase stages and FO of fixed delay line. 2019-08-05 13:52:32 -07:00
jsowash a4a72a9639 Merge branch 'dev' into add_wmask 2019-08-01 13:49:52 -07:00
Matt Guthaus 7ba97ee0ba Fix missing port in control logic 2019-08-01 12:42:51 -07:00
Matt Guthaus 8771ffbfed Fix bug to add all p_en_bar to banks 2019-08-01 12:28:21 -07:00
Matt Guthaus ff64e7663e Add p_en_bar to write ports as well 2019-08-01 12:21:43 -07:00
Matt Guthaus a8d09acd40 Use ordered dict instead of sorting keys 2019-08-01 12:21:30 -07:00
jsowash e4d8ba90a5 Merge branch 'dev' into add_wmask 2019-08-01 12:07:14 -07:00
Matt Guthaus d403362183 Sort keys for random read address choice. 2019-08-01 11:32:49 -07:00
jsowash bb1627bcec Added test to end of w_mask_and_array so a regression test will be performed on it. 2019-07-31 14:59:33 -07:00
jsowash 9819b5356e Merge branch 'dev' into add_wmask 2019-07-31 14:43:48 -07:00
jsowash 774f08da51 Added layout pins to and test for write_mask_and_array. 2019-07-31 14:11:37 -07:00
Hunter Nichols b4ef0ec36d Removed unused characterization module. 2019-07-30 20:33:17 -07:00
Hunter Nichols 24b1fa38a0 Added graph fixes to handmade multiport cells. 2019-07-30 20:31:32 -07:00
Hunter Nichols c12dd987dc Fixed pbitcell graph edge formation. 2019-07-30 00:49:43 -07:00
Matt Guthaus 98878a0a27 Conditionally path exclude 2019-07-27 12:14:00 -07:00
Matt Guthaus 8e43469486 Update spice results 2019-07-27 12:13:44 -07:00
Matt Guthaus d7bc3e8207 Add dummy pbitcell 2019-07-27 12:13:35 -07:00
Matt Guthaus 2824315f79 Fix error in wmask if 2019-07-27 11:51:40 -07:00
Matt Guthaus 5cb320a4ef Fix wrong pin error. 2019-07-27 11:44:35 -07:00
Matt Guthaus fa4f98b122 Fix ALL of the indents. 2019-07-27 11:30:48 -07:00
Matt Guthaus 37fffb2ed2 Fix bad indent. 2019-07-27 11:14:56 -07:00
Matt Guthaus 468a759d1e Fixed control problems (probably) 
Extended functional tests for 15 cycles (slow, but more checking)
Fixed s_en to be gated AFTER the RBL.
 2019-07-27 11:09:08 -07:00
Matt Guthaus 52029d8e48 Fix incorrect port_data BL pin name. 2019-07-27 06:11:45 -07:00
Matt Guthaus 179efe4d04 Fix bitline names in merge error 2019-07-26 22:03:50 -07:00
Matt Guthaus e750ef22f5 Undo some control logic changes. 2019-07-26 21:41:27 -07:00
Matt Guthaus 0c5cd2ced9 Merge branch 'dev' into rbl_revamp 2019-07-26 18:01:43 -07:00
Matt Guthaus 7eea63116f Control logic LVS clean 2019-07-26 15:50:10 -07:00
Matt Guthaus dce852d945 Restructure control logic for improved drive and timing. 2019-07-26 14:54:55 -07:00
Matt Guthaus 3327fa58c0 Add some signal names to functional test comments 2019-07-26 14:49:53 -07:00
Hunter Nichols dc46d07ca3 Removed unused code for input loads 2019-07-26 14:20:47 -07:00