Fix for pr2224949
The compiler generates a concatenation LPM to zero-pad ports when the
signal widths don't match up. However, when the VHDL generator generated
the input signals to this LPM it incorrectly sized them to be the width
of the result.
The VHDL converter erroneously treated a casez and casex exactly
the same. In reality a casez compares a 'x' value (it is not a
don't care). It also adds support for a full don't care case by
just returning True for the condition.
When the parser detects a signal type conflict, print a more useful
error message. In the process, be more careful with what line number
is actually attributed to the declaration.
In a procedural single bit non-negated reduction (&, | or ^)
we need to translate a 1'bz to a 1'bx. The easiest way to do
that is with two %inv opcodes. This patch modifies the code
generator to do this for this very special case.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Eliminate three "warning: suggest parentheses around assignment used as truth value"
Obviously not needed, but it's easier to add the superfluous parentheses
than remember that these warnings are benign.
If one of the arguments of a comparison expression has a real value, then
the expression with is 1 no matter the width of the other argument. This
means that the arguments may have different widths in this special case.
Patch is from pr2251119, suggested by Martin Whitaker.
This patch moves the checks for automatic variables being passed to
the $monitor or $strobe system tasks from the calltf routine to a
new compiletf routine. It also adds the file name and line number
of an offending call to the error message.
VHDL can't select bits from arbitrary expression so sometimes
translating IVL_EX_SELECT would fail. This is easily fixed by
replacing the select with a shift in this instance (and the
resizing)
The VVP %join function was incorrectly treating the return from a
non-automatic function as a return from an automatic function in
the case that the non-automatic function result was being used as
a parameter to an automatic function. This patch fixes this error.
A simple typo in the rhs of an expression would crash the compiler.
Example:
module crash3;
reg clk;
integer cnt1=0;
always @(posedge clk) begin
cnt1 <= (cnt==81) ? 0 : (cnt1+1);
end
endmodule
This patch addresses a number of issues:
Rewrote the $test$plusargs and $value$plusargs routines to have
better error/warning messages, to support runtime strings, to
correctly load bit based values (truncating, padding, negative
value), added support for the real formats using strtod() and
added "x/X" as an alias for "h/H" to match the other part of
Icarus.
Rewrite the vpip_{bin,oct,hex}_str_to_vec4 routines to ignore
embedded "_" characters. Add support for a negative value and
set the entire value to 'bx if an invalid digit is found. A
warning is printed for this case.
Rewrite vpip_dec_str_to_vec4 to ignore embedded "_" characters,
to support a single "x" or "z" constant and to return 'bx if an
invalid digit is found. A warning is printed for this case.
It simplifies the system task/functions error/warning messages.
It removes the signed flag for the bin and dec string conversions.
This was not being used (was always false) and the new negative
value support makes this obsolete.
Add support for a real variable to handle Bin, Oct, Dec and Hex
strings. They are converted into a vvp_vector4_t which is then
converted to a real value.
Add support for setting a bit based value using a real value.
Removed an unneeded rfp signal in vpip_make_reg()
make_safe_name now makes sure a VHDL signal is never given a
name that conflicts with any reserved words. If it does, we
just prepend VL_.
(This code was already present, but the full list of reserved
words wasn't.)
In the vvp code generator, when zero/sign extending a sub-expression,
the sub-expression is first evaluated and stored in one location in
the thread vector store, then is copied and extended into a second
location. The storage used for the initial sub-expression evaluation
is never deallocated.
The NetEBAdd::eval_tree method is able to use the associative property
of addition to reduce some constants, but it is picky about widths.
Make it a little bit more resilient to expression widths.
Even though we cannot immediately give a width for a concatenation
that has a repeat expression (the expression must be evaluated first)
we still must scan the test_width of the arguments so that they can
resolve their types.
This patch adds a number of compile and run-time checks for illegal
uses of variables declared in automatic tasks and functions. It
also adds a check for event expressions in automatic tasks that use
features not yet supported in VVP.
This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
This patch fixes a minor memory leak in ivlpp and releases all
dynamically allocated memory before the program exits. Other than
the dynamically allocated push state buffer in flex, ivlpp has no
valgrind memory errors or warnings.
There was a memory leak in the preprocess_only code (cmd was not
being freed when the command completed successfully. Valgrind
was also marking the temporary file names as still reachable, so
they are not memory leaks, but freeing them makes valgrind happier.
The goal is to completely remove the svector class because the standard
vector class works perfectly well. This removes the uses in the Module.h
header file.
Signals may have VMA disciplines attached. Make the attached discipline
visible through the ivl_target.h API. Also, re-arrange the internal
handling of the discipline structure so that we can expose disciplines
through the ivl_target C API without creating new structures. The
t-dll-api implementations of the discipline access functions can look
at the elaborated discipline structure directly. This is possible since
the discipline parse and elaboration are very simple.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. This patch set covers the tgt-vhdl
directory, and was tested by Nick.
This patch fixes some problems found when trying to dump words
from a real wire array. There are still a few more things that
look suspicious and need testing.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
The arguments of logical and/or are self determined, and the width is
fixed as 1 bit. Account for this special behavior by creating the
PEBLogic class.
The comparison operator operands are self determined, but are forced
to be the width of the wider operand. This means that the operands must
be evaluated with their widths truncated. In spite of all this, note
that comparisons expression results are 1 bit wide.
The operands of divide need to be at least the width of the expression
when calculating a constant divide. The only matters for the special
case where the result is x, because the verinum implementation of
divide will get the result width from the left expression width.
Now that NetNet objects in NetScopes are kept in a map, remove the
linked list for scanning them. This improves the lookup process from
an O(e**N) process to more like O(log(N)). This matters for very
large designs.
Get at least basic elaboration of analog processes and contribution
statements. Bring the statements and analog statements together and
net future elaboration work sort out which statements are valid in
a given context. This makes sense because there really is a lot of
syntactic overlap, and analog behavioral code is processed somewhat
sequentially.
Put together the infrastructure for elaborating analog statements,
including create the NetAnalogTop objects that hold analog statements
and are in turn held by the design.
While doing this, clean up the various unique initial/always enumerations
to use the ivl_process_type_t type.
The optimization that allowed a mux that had one input always
connected to high-Z produces code that is actually slower than
the original mux, so for now we are removing that optimization.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
The bufif devices do not correctly propagate the Z value as
required by the standard. The MOS devices do propagate a Z
value, but they do not correctly handle the case where both
inputs are Z and the select is undefined/Z. The standard
specifies that this should be X, but we produce Z. The full
MUX and %blend operator also function this way, so Icarus
may not match the standard, but it is consistent. I would
also argue that the standard is incorrect. If both inputs
are Z then the output should be Z no matter what select is.
The condition expression needs its width tested, even if the width
is not used. Also clean up some handling of widths/types for other
expression types.
This fixes the sign calculation for port padding. It also reports if
the padding will be signed or not in the warning message. The inout
calculation may not be correct. It requires both the signal and the
port to be signed, but inout is not currently padded anyway.
If a part select (either a constant or constant indexed part select)
of a L-value is fully outside the signal the part select will be
omitted after printing a warning. If a part select straddles the
upper portion of a signal a warning will be printed. The run time
will use only the appropriate part of the select. Straddling the
lower part of the signal is not currently supported and a message
is printed for this case.
The right-operand of shift expressions is self-determined, but we still
need to run a test_width to get the PExpr decorated with types and
expression widths.
A casex statement cannot be directly translated to a VHDL case
statement as VHDL does not treat the don't-care bit as special.
The solution here is to generate an if statement from the casex
which compares only the non-don't-care bit positions.
The l-value doesn't really constrain the size of unsized expressions
because there are possible sub-expressions that may pull high bits
down to the low bits. (Divide, for example.)
It is possible, via the use of the $signed() function, for concatenation
expressions to be signed. Make sure the evaluated constant had the
proper sign by checking explicitly.
Continue cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in test suite.
This patch modifies the code that finds and combines similar events
such that if similar events are found in both static and automatic
scopes, the retained event will be in a static scope. This is a
performance enhancement, as VVP has more run-time overhead when
handling events declared in an automatic scope.
This code was likely never checked properly since it makes no
sense to copy the expression from the new temporary system
function. You must copy the value from the current function.
Even on 64 bit machines immediate values should be limited to
32 bits so that the a.out file will run correctly on a 32 bit
machine. This patch fixes a number of places where the code
generator was not checking for/observing this.
The signedness of comparison expressions is typically unsigned, even if
the comparison to be performed is signed. The comparison (and particularly
the expr_synth of the comparison) needs to account for this explicitly.
If either of the operands of a ternary expression are unsigned, then
both are treated as unsigned. It works just like a binary expression
in that regard.
It is up to the elaborator to sign-extend the inputs if the multiply
is signed in the Verilog source. The run time always processes the
multiply as unsigned.
The results of comparisons are unsigned, but the arguments may be signed
and the calculation performed may be signed. Handle the padding properly
for comparisons so that the math is properly signed.
When doing lossless addition to an unsized constant, we make the size
be width of an integer, only to be consistent with other tools. In fact,
don't go overboard if we don't have to.
Later passes need the intermediate results for width and size so that
some special cases, were self-determined arguments occur, can be
processed properly during elaboration. This can be especially tricky
and interesting for ternary expressions.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
This patch fixes the expression width calculation for a multiply
operation with an unsized operation. The expression width needs
to be at least the minimum of the maximum multiply result width
and the width of an integer.
Currently, a bitwise boolean operator will cause the expression
width to be reduced to the size of the result. This can give
rise to incorrect results. This patch changes the behaviour to
take into account the required precision for calculating the
two operands.
This patch removes all the checks for constant expressions performed
during the parsing phase, as these checks are (mostly) repeated during
elaboration. It adds the missing check in the elaboration phase (the
RHS of a register initialisation), and improves the error reporting
and error recovery in other checks.
This patch fixes pr2132552, which was caused by a fault in the parser
constant expression checking.
Emitting a VHDL expression like Resize("01", 32) is ambiguous
between interpreting "01" as a Signed or an Unsigned. There's
no point actually outputting this as we can sign-extend the
constant value in the code generator, which is what this
patch does.
In assignments, the expression width may be defined by the width of
operands, and not that of the l-value. Choose whichever is creater and
set (or pad) the expression to that width.
Multiply of any expression with constant 0 will always return zero.
We can handle this early, during elaboration, and save a lot of code
downstream the trouble.
Also, while we are at it, fix up test_width to re-test the left
expression width if the right expression width is unsized. This allows
for the left expression code to adapt to the unsized-ness of the
expression context.
This patch pads inputs and output ports correctly when the port
and the port expression have different widths. It does not fix
inout ports.
It also sets the file and line number information in the unsigned
pad_to_width() routine.
This patch pushes the evaluation of constant system functions into
normal elaboration vs doing them in the preliminary parameter
elaboration.
It also fixes the compiler version of clog2 to return integer_width
vs a fixed 32 bits.
There are cases where the r-value doesn't pad itself to the width
that is requested by the call to elaborate_expr. This impacts the
elaboration of PGAssign. Pad/sign extend as appropreate.
The arguments to bitwise operators are padded if *either* of the operands
is unsigned. This is according to the sign/unsigned expression rules
of Verilog, and also matches the behavior of the "Big-3."
The addition of UINT_MAX in netlist.cc requires #include <climits> when compiling with gcc-4.3.2.
I also noticed that commit 8704e3e used c style includes in c++ sources contrary to the style used in the rest of the c++ code and fixed those.
In the transition to the new expression code we forgot how to
handle the logical not (!) of a real value. This patch adds a
more appropriate error message until we get this reimplemented.
MinGW uses the GetProcAddress() function to find the address of
the vlog_startup_routines() procedure in a .vpi file. This routine
requires that the leading underscore be omitted from the name even
though the underlying routine really has one.
alloc_instance for real values was just passing a new double
to be added to the context items. The new constructor does
not set the default value so we need to do that manually.
Simple error setting the expression width of the FALSE clause of a
ternary expression when the expression is short cuirted to false.
Fix a simple error where the type of a system function is not returned
through the test_width function.
The arguments to user defined functions are self-determined. And if
the result is real valued, we can call them lossless self-determined.
Treat these arguments like r-value elaboration for assignments.
Also clean up the binary divide elaboration a little bit.
Also, floating point literals are unsized with width==1.
When a multiply expression is IVL_VT_REAL, then the default width is
the width of the operands, and not the sum of the operands. In fact, it
should turn out to be 1.
Also, the width of the multiply expression when we get to the ivl_target
API, need not be the sum of the widths of its arguments. In fact, if the
arguments are signed, that would be completely wrong. So adjust the
stub target to properly test this constraint.
Widths of real values are always 1. When paired with vectorable types
in expressions, the vectorable type is processed as losslessly self-
determined. ("unsized" in the test_width methods.)
Don't force the expression with to be different from the l-value if the
l-value is the immediate destination. This saves the effort of handling
overly wide constant values in simple cases.
Also, in determined contexts, signed unary minus does not need to pad the
width of the expression.
the PGAssign elaborate method used the test_width to get the width
of the r-value expression. This should be completely sufficient to
get the width of the expression, so always use a defined width to
elaborate the expression.
When ternary expressions are self-determined, use the test_width
method to get a proper reading of the expression width. Also improve
the test_width method to handle unsized operands.
This patch adds non-blocking event control for array words.
It also fixes a problem where the word used to put the
calculated delay for a non-blocking array assignment was
not being released. It also fixes the non-blocking array
assignments to correctly handle off the end/beginning part
selects.
Currently, parameters and localparams declared in tasks, functions,
generate blocks, and named blocks are placed in the parent module
scope. Event declarations in these scopes are not permitted (a
syntax error is reported). This patch corrects this behaviour, so
that all the above declarations are accepted and are placed in the
scope in which they are declared.
Note that the IEEE standard does not permit parameter declarations
in generate blocks. This patch causes the parser to reject such
declarations.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
When evaluating an expression into an index register bit 4 is used
to determine if the expression had any X/Z bits. In the case of a
constant immediate value this can not happen so make sure the bit
is cleared.
We need consistent pointer output (%p) and under MinGW we need to
us _snprintf instead of snprintf to get this. The recent event
control addition missed this. This has been reported to the MinGW
developers and they are working on a solution.
The previous patch (commit 8b0ca902a6)
dealing with the possibilities of (unsigned long) and (vvp_time64_t)
being either the same or different managed to redefine UL_AND_TIME64_DIFF
in the 64-bit case. This does, of course, trigger a compiler warning.
That warning is repeated on every .cc file with a #include "config.h",
which is to say, just about every file.
This patch inverts the sense of the preprocessor conditional, calling
it UL_AND_TIME64_SAME. No more warnings!
It takes a carefully crafted source file to cause elabortion to make
an arrayed multiple-output gate that is not vectorized into a single
wide gate. But that special case does need to be handled.
While the standard is not completely clear about this, we are making
it an error for a `timescale directive to be inside a (macro)module
definition. This means that all modules and any statements contained
within have a single well defined time unit and precision.
Logic gates usually have one output and several inputs, but a few
have multiple outputs and one input. Since the NetNode objects have
only a single output, handle the case by creating multiple NetNode
objects, one for each output.
A variable that is used to set the delay of a .delay statement
must be scaled to match the local units and for real values
rounded using the precision. This value is then converted to
the simulation precision.
Signals of a nexus must have types that exactly match, but the drivers
of a signal nexus have slightly more subtle rules for the case where
the signal is IVL_VT_LOGIC. Express those rules in the function
check_signal_drive_type, and use it to check the type of constants
driving a signal.
Remove redundant pointer to the containing NetPins object by keeping
the pointer only in the first Link (pin 0) of an array of links. In
this link, replace the pin number with the NetPins pointer, and set
a pins_zero_ flag to indicate that this has happened. This way, only
the first pin in a Link array will have the pointer to the NetPins
that contains the array, and the pointer takes up practically no space
at all.
This class was old, and its original design pulled literally from
the LPM reference. But of nine pins declared, only 4 were used.
Remove all the excess junk and clean up the designed dump handling
of the device.
The r-value expression takes on at least the width of the l-value. If
there is a sized width greater then the l-value width, take that on
instead. But if the r-value is unsized, there are unsized sub-expressions
that cause the expression as a whole to be unlimited width, so elaborate
and evalulate the r-value as lossless.
The true and false expression clauses must have compatible types,
which are not necesarily identical. In particular, VT_BOOL and
VT_LOGIC are compatible for the purposes of ternary arguments. The
test in NetETernary::synthesize was incorrect.
In the process, fix the type handling of NetConst objects to allow
for IVL_VT_BOOL constants. This is information that the downstream
may find useful, so should be handled correctly.
It's processed once by AC_OUTPUT in configure.in and then again
by AC_OUTPUT in tgt-vhdl/configure.in. This is a bug from when I
first started on the VHDL target, and was basing it on the tgt-vvp
code. The call to configure in the tgt-vhdl directory is not
actually necessary either, since it doesn't do any checks not
performed elsewhere, so that should proably be removed later.
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
The exponentiation operator in VHDL is not defined for numeric_std
types. We can get around this by converting the operands to integers,
performing the operation, then converting the result back to the
original type. This will work OK in simulation but certainly will not
synthesise unless the operands are constant.
However, even this does not work quite correctly. The Integer type in
VHDL is signed and usually only 32 bits, therefore any result larger
than this will overflow and raise an exception. I can't see a way
around this at the moment.
When the -V flag is passed to the iverilog command, we can easily
print the version information for the driver itself, but it is also
valuable to probe all the components that would have been used for
a real compile. So the driver executes the preprocessor and the ivl
core to have them print version information.
The ivl core program also tries to load the target code generator
and get version information to print. For this to work, create a new
optional entry point "target_query" that takes a query key string as
an argument and returns a const string as the result. Use this with
the key "version" to get version information out of the target.
Target selection is done by the DLL target code generator, so there
is no value having a layer of target selection ahead of it. Remove
all that redundant code and simplify the target config files to reflect
this.
It is possible for signe-extend to have a delay attached to it. (Same
for repeat.) Handle it like other LPM devices, by stuffing a .delay
device into the output path of the device, if appropriate.
Generate scopes were previously ignored, and this would cause a segfault
later on. This patch gives an error whenever it encounters a generate
scope. This should be removed once generate statements are implemented.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
Statements can have attributes attached to them. Handle a few cases in
the parser where attributes may be attached to statements, and get them
as far as the pform.
This patch adds blocking repeat event controls and also makes the
base repeat statement sign aware. If the argument to repeat is
negative (it must be a signed variable) then this is treated just
like an argument of 0 (there is no looping). Doing this allows us
to model the repeat event control as follows.
lhs = repeat(count) @(event) rhs;
is translated to:
begin
temp = rhs;
repeat (count) @(event);
lhs = temp;
end
This patch also pushes the non-blocking event control
information to the elaboration phase where it will report they
are not currently supported.
The generate block is a placeholder for the generate items, and it
is the items themselves that can specify the name of the generate
block that is created.
Add "include" to fix error with abort() in dup_expr.cc
Add "include" to AStatement.h so usage of struct PExpr works
Get rid of eval_tree.cc:577: warning: suggest parentheses around comparison in operand of ^
The right shift of vvp_vector2_t needs to
account for and mask off shifted bits. Otherwise
there will be unexpected results after
a vvp_vector2_t::trim method.
This patch adds the constant system functions for Verilog-2005
and Verilog-AMS. These are evaluated at compile time. $abs(),
$min() and $max() support their polymorphic behavior in the
compiler where it really matters. They are always evaluated
as reals in the run time and the result/argument(s) will be
converted as needed.
The Verilog-2005 functions are available if using the 2005
generation (default) and if either the icarus-misc (also on
by default) or verilog-ams flags are set.
The Verilog-AMS functions are available if either the
icarus-misc or verilog-ams flags are set.
If the argument to $clog2() is unsized constant, then trim it to the
smallest representation that doesn't lose the sign, then do the $clog2
on that.
Also, use integer_width instead of 32 for the minimum $clog2() result
for a negative value.
If the argument to $clog2() is unsized constant, then trim it to the
smallest representation that doesn't lose the sign, then do the $clog2
on that.
Also, use integer_width instead of 32 for the minimum $clog2() result
for a negative value.
This patch moves the always zero or possibly zero delay checks
to a point after the circuit is full elaborated. Before it
could try to check tasks that had not already been evaluated
resulting in a crash.
When looking for a delay_type() in a block stop when we have a
DEFINITE_DELAY. Doing this could reduce the number of statements
that need to be checked.
Previously only signedness was only corrected for the
result. This patch ensures the VHDL operands have the
same signedness as their Verilog counterparts.
This fixes a few of the signedX tests.
Assume that anything that is strength aware already handles a
recv_vec8_pv and make the default function convert the bits
to a vec4 and then call recv_vec4_pv with this new value.
It is legal for a task to have no definition. In that case, the
delay_type calculations (used to detect infinite loops) can assume
that an empty definition is a no-op and return NO_DELAY.
Be more sophisticated with the code generated for constant values.
When values are large, use an optimal mix of %movi and %mov
instructions to get the desired value, no matter what the content.
This splits up the monolithic and confusing vhdl_expr::cast function into
several smaller to_XXX functions which each generate code to cast an
expression to type XXX. This makes it much easier to understand and maintain.
In continuous assignment, the width of the expression needs to come
from the expression itself, and not just from the width of the l-value.
Use the PExpr::test_width method to get the width of the expression
to pass to the elaborate.
the sub_net_from function is used by the ::synthesize method of the
NetEUnary class to make the expression 0-N. By making that function
handle a real-valued net, the NetEUnary suddenly supports real-valued
nets, and this probably helps in other places as well.
When the condition expression of a ternary is constant 1 or 0, we can
short-circuit the elaboration by only processing the clause (true or
false) that we need. This saves compile time and execution time.
This patch adds an error message for the standard system
tasks and functions that are not currently implemented.
These are currently $fmonitor*, $ferror, $fread, the
queue and PLA tasks.
It is possible for the left operand of a left shift to be not known
early during elaborate expression. In that case, make a punt expression
and expect it to be resolved later.
GCC 4.3 has tightened up header dependencies so that
`strcmp' is no longer declared if <cstdlib> is included
(which it was in prior versions). This causes the changes
in 5e512e6570 to fail to
build with 4.3.
This patch includes <cstring> in the files that are failing.
The expr:::synthesize methods need not deal with saturating left or
right shifts if they are dealt with early, in elaborate_expr methods.
So the elaborate_expr for shift takes on much more responsibility.
Mostly this ensures that a recursive call to a function
is made with the correct types (this may involve generating
code to cast expressions to the correct type).
This patch pushes the automatic property for both tasks and
functions to the code generators. The vvp back end does not
currently support this so it will error out during code
generation. The VHDL back end should be able to use this
property and tgt-stub prints the property. Having this will
also make it easier when we do adding this to the runtime.
This patch adds the $clog2 system function. It also makes this
function work as a constant function. The runtime version still
needs to be updated to use an integer based version instead of
the current double based method. The double method suffers from
rounding errors.
This patch adds support for vpiScaledRealTime and vpiSuppressTime
to VPI callbacks. It also fixes a bug where the callback data
object was not being copied correctly and adds support for
vpiSuppressVal. This requires adding vpiSuppressVal to a few
other routines. It adds the ability for a callback to return
more than vpiScalarVal (all values supported by the
vpip_vec4_get_value() procedure). It also fixes a bug where
vpip_vec4_get_value() would incorrectly return vpiZ for a BIT4_X
scalar value. It also comments the potentially dangerous
vpiScalarVal calculation in the vvp_fun_signal::get_value()
procedure.
Since NetExpr::synthesize methods were rarely used, then had a lot
of bugs. Now that continuous assign uses these methods, these bugs
must be fixed.
Binary and Unary minus properly pad/extens its arguments,
Case compare generates correct code,
Divide properly takes on signed flag,
Signed right shift sign-extends its argument to prevent loss of sign bits
and uses the NetSignExtend instead of simple padding,
Use the correct target node for reduction NAND,
Properly handle constant arguments of NetESelect
Handle some exressions that were not handled before, include abs()
and POW.
In signed contextx, the right shift and unary minus expressions need
to be sign extended before they operate, otherwise there may be bad
results in the high bits in the greater context.
This patch causes a thread that is created to evaluate a function
to be executed immediately. The parent thread is resumed when the
function thread terminates.
Because Icarus tries to elaborate as much as it can even after
an error has occurred we need to check for these errors during
elaboration. This patch prevent an undefined identifier from
crashing the compiler.
When the continuous assignment is signed, then sign-extend the r-value
in the few cases where the expression is stubbornly smaller then the
desired width.
When multiply is done in native words, the conversion to words from the
vp_vector4_t vectors must be done signed. This only matters if the
input operands are different sizes (and themselves signed) but will
not hurt even if we want an unsigned result.
Logical (in)equality needs to look at all the bits of both operands,
and cannot short circuit the test unless defined bits differ. If there
are undefined bits, the equality is undefined at that point, but return
x only if there are not other bits that make the results clearly
unequal.
When nets are assigned directly to a net, we need to create a driver
to carry the strength. Normally, the implied drive of a continuous
assignment is carried by whatever gate the r-value expression ends
with, but with simble net-to-net assignment, there is no net so we
need to install a BUFZ to carry the assignment.
This is caused by using a hierarchical reference (which can't
be translated to VHDL). The result of get_decl is NULL since
the signal has been declared in a different VHDL architecture.
Adding the assert is cleaner than having it segfault, for the
moment, until a nicer error message can be added.
convert the continuous assign elaboration to use elaborate_expr
and synthesize methods instead of the elaborate_net methods of
PExpr. This exposes problems with the synthesize methods, but it
is a better way to do it.
Previously this was handled by creating an internal
signal that was connected to the output and could also
be read inside the entity. The correct solution is to
make the output `buffer' rather than `out'. However, this
does not work in the case when an output is connected to
an output of a child entity, and that values is read
in the parent. In this case *both* the outputs of the child
and the parent need to be made `buffer'.
Combinatorial UDPs will be implemented with a `with ... select'
statemetnt. However the input to this must be "locally static".
This patch joins the inputs into a vector which can be used as
the select expression.
In preparation for using the synthesize method to replace the
elaborate_net method of PExpr, rework the interface to the
synthesize() method. This changes no fnctionality, but does set
up the infrastructure for the next step.
When elaborating a parameter expression fails we need to set the
expression to 0 since it has already been partially allocated.
Doing this allows us to not evaluate the dummy expression later.
This patch adds the time and realtime properties for user
task and function arguments. It also make a common rule
for real and realtime since they are the same.
This patch fixes a bug in the VVP code generator that causes syntactically
incorrect code to be generated if an event expression contains a memory or
array port.
The list of defparams in the pform module definitions (in class Module)
should not be consumed when they are used. The module may be instantiated
moltiple times, so consuming the defparams during elaboration will cause
subsequent instantiations to not have the defparams. That's wrong.
...with the correct behavior. It would be possible to
just translate it as a regular VHDL case statement (as
it was before this patch). But the behavior is not
correct as VHDL only does the equivalent of case-equality
in case statements and this can be confusing when debugging
the output. An alternative might be to emit a warning rather
than an error.
When driving an input port to a module, watch out for the case where
the net is also driven within the instance. If this is the case, take
pains to make sure what goes on in the instance doesn't leak out
through the input port. Add a BUFZ (continuous assignment) to isolate
the context from internal driving.
The old code returns a vpiIntVal for $fscanf("%d") format strings. This
limits the maximum input range arbitrarily to 32 bit.
This patch implements %d parsing similiar to %b and %x.
'?' and 'X' chars are not accepted for %d format.
If the final statement in a process is a non-blocking
assignment then there is no point adding a `wait for 0ns'
after it since it will be immediately followed by another
wait. This case is suprisingly common, so this patch helps
generate much cleaner output without breaking the cases
where the 0ns wait is actually required (e.g. to implement
non-blocking assignment properly).
The NetBranch object is connected, but not like an object, so the
NetPins object base class is factored out from NetObj to handle the
connectivity, and the NetBranch class uses the NetPins to connect a
branch.
Also, account for the fact that nets with a discipline are by default
real-valued.
This patch adds a forward declaration for every user funciton.
This fixes VHDL compile problems if a function calls another
before it has been declared.
Multiple lvals are implemented by first assigning the complete
RHS to a temporary, and then assigning each lval in turn as
bit-selects of the temporary
Previously the code generator expanded ternary assignments to
and `if' statement. This patch replaces that with a single assignment
and a call to a Ternary_* support function. This will make it
much easier to support multiple lvals later.
The double to vvp_vector4_t constructor was not using the correct
declaration for the bit words. This worked as long as unsigned and
unsigned long were the same size (usually).
Detect function call expressions that turn out to be calls to the
access function of a nature. Elaborate the access function and stub
the emit code. This gets the access function just short of the code
generator.
The preprocessor was incorrectly setting the line when starting
an include file to the line it was called from instead of 1.
This would give incorrect line numbers for errors/warnings in
the included file.
The new real to int conversion was incorrectly setting the
bits for minus infinity to all ones. This is incorrect in a
two's complement encoding where the largest negative number
would be a leading 1 followed by an infinite number of zeros.
This patch updates the %cvt/vr command to use the new double to vector
constructor. This allows the resulting bit pattern to be larger than
a long. The old method was producing incorrect results without a
warning for large bit values.
This patch makes .part/pv strength aware, resolv vec8_pv
aware. vvp_net_fun_t adds vec8_pv as a virtual function
with an appropriate error default. vvp_fun_signal should
full support vec8_pv (not tested and may not be needed).
This patch fixes a bug where a local parameter with only a range
was incorrectly setting the default parameter type to IVL_VT_NO_TYPE.
This would create a compile time assert for any untyped
parameter/localparam immediately following it.
Contribution statements have an l-value and r-value. Parse those
expressions into pform so that elaboration has something to work with.
In this process, this patch also changes the PECallFunction class to
use the vector template instead of the svector template. The latter
doesn't add anything over the STL vector template, so this is a start
of working the svector out.
Whilst adding `wait until ...' at the end of every
process is a valid translation of the input, it is not
actually synthesisable in at least one commercial
synthesiser (XST). According to the XST manual the
correct template is to use `wait until ...' at the
start of sequential processes and `wait on ...'
(equivalent to `wait until ...' with 'Event on all
the signals) at the end of combinatorial processes.
This patch implements that.
Initial processes set a magic flag in the code generator
which allows it to push constant assignments into the
VHDL signal initialisation and omit the assignment.
However, it should only do this if the signal has not
already been read (otherwise the previous read would
not get the undefined value as expected)
If the Verilog source contained a continuous assignment
of a constant to an output, it would not be present in
the VHDL output. This patch generates a VHDL continous
assignment in these cases.
If output P of A is connected to output Q of B (and A is
instantiated inside B) then VHDL does not allow B to read
the value of Q (also P), but Verilog does. To get around
this the output Q is mapped to P_Sig which is then connected
to P, this allows B to read the value of P/Q via P_Sig.
Previously the code generator tried to infer the VHDL types. Now it
takes a much more dumb approach and forces the VHDL type to be
the same as the ivl type (derived from ivl_expr_signed and
ivl_expr_width) in the expression tree. This works much better :-)
The signed/unsigned-ness of an expression needs to be
preserved over any call to Resize. Also add a sanity
check to make sure non-vector types are not resized.
Verilog_Case_Ex is used as a temporary to store the result of
any non-static case expression. This fixes a bug where it would
be declared multiple times if there were multiple case statements
in a block.
When generate schems and instance arrays are nested, it takes
multiple iterations of elaborate scope, defparams and evaluate
parameters before everything is worked out. Rework the work item
processing so that the loop elaborates scopes and runs defparams
in phases. The phases are needed so that we can tell when the
remaining defparams are orphaned.
Modules mentioned within generate schemes are not candidates for
defaults guesses at root modules. They are, obviously, used within
the generate schem.
We must run generate schemes after running defparams because the
defparams may define the results of the generate schemes. So put
the generate schemes for a module scope into elaborator work items.
The l-value of a defparam assignment is a hierarchical name that may
include array selects to select scopes from module arrays. Therefore
it makes no sense to store parsed defparams in a map. Instead, they
should go into an ordered list. This also maked more sense because later
defparams *may* have the same name as a previous defparam, and will
override the previous defparam. So replace the map of parsed defparams
with a list of parsed defparams.
Also, as soon as the defparam expression is elaborated, the list entry
is no longer needed, so delete it. Save memory.
It is possible for defparams to not find their target the first time
around, because the elaboration of the target scope is not yet done.
So retry the defparams once for each scope by putting it on a work
item in the elaborator_work_items list.
The file and line number information needs to be copied when
doing a macro expansion. This prevents a macro that expands to
an `ifdef of other construct that needs to push the stack
from core dumping.
When we detect that a module instance is an array of instances, delay
the elaboration of the array until after the first defparam processing
is complete. This allows for defparam statements to control the
instantiation of module instance arrays.
Putting scope elaboration into work queue items allows for handling
more complex processing order. The elaboration_work_list queue drives
the processing of elaborate_scope and parameter evaluation.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
Within generate schemes it is possible to have nested scopes, even
more liberally then outside generate blocks. So see to it that the
scopes properly stack with the generate blocks, and that wires and
behaviors are put in the right scopes.
Generating task/function definitions involves getting the functions
to put themselves into the generate scheme instead of the module,
and getting elaboration to elaborate those definitions in the
generate scheme.
Verilog-2001 only allows a single generate item within a generate-
endgenerate region, but allowed one to collect generate schemes with
begin/end blocks. Verilog-2005 cleaned up that mess, and it is the
2005 syntax that Icarus Verilog implements. This patch detects the
anachronistic use of begin/end within the generate region, ignores
the begin/end words, and prints a warning that the user is using an
obsolete syntax.
Named begin/end blocks burried within generate schemes need to be
elaborated. Handle this by remembering to elaborate_scope on the
statements within the generate scheme.
In the process, clean up/regularize some of the member names and
methods.
This handles the general case of a non-real operand to a real-valued
division. This can turn up if only 1 operand of a divide is real. In
this case the division as a whole is real and the other operand must
be cast to real.
This method creates an extra node, but it should be a very compact
node and this node does no evaluation tricks so in the run time should
be no more expensive then folding the cast into the .arith/div.r itself.
This patch adds checks that $fopen is only called with a valid
mode argument. It also checks that the file name for $fopen{a,r,w}?
is a valid looking file name (all characters satisfy isprint()).
The later should prevent creating weird file names because of
Verilog bugs.
This patch changes the base oct to string converter to correctly
pad the top digit. x or xx should display as a single lower case
x when they are located in the top bits. Before these were being
interpreted as 00x or 0xx and displayed X. Also modified the hex
conversion to use this same scheme instead of a loop.
First, handle the trivial (but possibly common) resolution cases in
inlined code, and only call the complete function for the complicated
cases. Then clean up the complex function for readability, and account
for the constraints that the front-end function established.
Arrays of vvp_vector4_t values redundantly store some fields in every
word. Create a special type that stores vvp_vector4_t values in a form
that does not duplicate the width of all the items. This can save a lot
of space when big memories are simulated.
The schedule_assign_plucked_vector is a better way to implement the
schedule_assign_vector, or at least no worse, so remove the now
redundent schedule_assign_vector.
It is legal (though worthy of a warning, I think) for the part select
of an l-value to me out of bounds, so replace the error message with
a warning, and generate the appropriate code. In the process, clean
up some of the code for signal l-values to divide out the various kinds
of processing that can be done. This cleans things up a bit.
This is a major rework on the sys_fileio routines. They now have
improved compiletf routines and the calltf routines are now
standardized. Along the way a few bug were fixed as well. Some
updates to other vpi files as well.
I changed the order of the $fputc() arguments to match C and the
rest of the system functions like it ($fungetc, etc.). I recently
fixed $fungetc() so I'm assuming the $fputc() needs the same fix.
It's an Icarus specific function.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The functor_ref_lookup() function fills its argument in with the
vvp_net_t* pointer that matches the var name, so there is no need
to create the vvp_net_t object before then.
The vpiIndex is really just a different view into the same object,
so implement the trickery needed to support a vpiIndex with the
absolute minimum memory cost.
The %load/vp0 instruction adds a signed value to the signal value being
loaded, but it doesn't allow for a signed source vector. Add the
%load/vp0/s instruction that pads the loaded vector, and add the code
generator details to properly use it.
The vvp_net_fun_t objects, and derived objects, are small, and are
created in large quantities. Tightly pack them into permanently
allocated space in order to save on system allocation overhead, and
thus save overall on memory.
Actually, the immediate value handling is a little chaotic and should
be cleaned up. This patch opens the door for allowing signed immediate
values, and uses them in a few places where they are explicitly handled.
We must go through the opcodes that can take immediate values and make
explicit whether they are signed/unsigned/etc, and what their size
limits are.
Part select of an entire signal returns just the NetESignal itself,
but since part selects are always unsigned, even if the selected
signal is signed, we need to cast the NetESignal to unsigned first.
The part select of a vector is converted by the compiler during
elaboration to a 0-based canonical address. But since it is legal
to address bits below the LSB, the canonical address can be negative.
So make the part select base for selecting from signals work with
signed arithmetic and make the code generator generate negative
indices when needed.
Scheduler cells are small objects that come and go in great quantities.
Even though they are allocated and deallocated a lot, they tend to a
steady state quantity, so put together a heap that is unique for each
cell type.
This heap actually saves memory overall because cells are allocated in
chunks, thus eliminating allocator overhead, and they are pulled/pushed
from/to a heap very quickly so that what overhead remains is slight and
bounded.
The vvp_net_t objects are never deleted, so overload the new operator
to do a more space efficient permanent allocation.
The %assign/v instruction copied the vvp_vector4_t object needlessly
on its way to the scheduler. Eliminate that duplication.(cherry picked from commit d0f303463d)
The vvp_vector8_t constructor and destructor involve memory allocation
so it is best to pass these objects by reference as much as possible.
Also have the islands take more care not to perform resolution if the
inputs aren't really different.
NOTE: This is a port of commit 2f4e5bf5b6
from the "performance" branch, without the resolver scheduling changes.
This was causing test suite variances with pr1820472.v. It looks like
there might be a race in that program anyhow, but for now leave out the
resolver scheduling changes so that the rest of this commit can go in.
The __vpiPV objects express themselves as vpiPartSelect objects.
Add support for value change callbacks by attaching the callback
to the signal that we part select from.
This patch adds the time and realtime types to parameters
and local parameters. It also makes the width (range) of
an integer parameter match the variable "integer_width"
(normally 32 bits). It also converts a real value to
an integer when a range is implicitly or explicitly
given. This all matches what the standard specifies.
Fixed an error in converting -1 to a unsized verinum.
The %load/v instruction was doing some spurious resizes of the vector
that comes from the signal. Eliminate those resizes that can be
removed, and optimize some that remain.
When parameters are replaced, the expression that is replaced is deleted
so make sure the pointer in the map is properly updated. Also, make sure
the defparam expression itself is not deleted because it is used to
print messages, such as design dumps.
This is not a solution to all the problems, but is a better catch-all
then what is currently there. Allow the index field to be a T<> that
accesses the thread to get the address index.
Note that the lexor.lex currently returns the T<> as a T_SYMBOL, and the
users of T_SYMBOL objects need to interpret the meaning. This is
probably not the best idea, in light of all the other *<> formats that
now exist.
Part select of parameter names is fixed up to be structurally similar
to part select of signals, and also to behave similarly. (Though not
identically, for reason.)
Part selects to signals are allowed to be off the ends of the signal
itself. The bits that are beyond the vector return X. This may mean
creating constant X bits on one or both ends of the result.
This patch cleans up some of the code to use common compiletf
routines where appropriate. It also adds code to print the
number of extra arguments and cleans up the messages a bit.
Parameter value ranges support the exclude of a point as well as
range, so add the syntax to support that case. Internally it is
handled as a degenerate range, but the parse and initial elaboration
need to know about it.
If a memory word was accessed before it was defined the
code was returning a zero width vector result. Now it
returns an appropriately sized vector of 'x'.
The memory opcodes %assign/mv, %load/mv and %set/mv
were removed by a previous patch. This one removes
the documentation from opcodes.txt. It also removes
the documentation for the .mem* statements for the
same reason.
Recursive branch resolution was scanning every branch end, even though
many branch ends share ports and need not be repeatedly scanned. Handle
marks and flags to cut off recursion where it is not needed so as to
save much run time.
Conflicts:
tgt-vvp/vvp_scope.c
Note that the draw_net_input.c takes in a lot of the codes that used
to be in vvp_scope.c, so some changes may have been lost.
This patch cleans up the dump routines and adds file and
line number information for errors. It also adds some of
the missing MemoryWord properties so they can now be
dumped and monitored correctly.
This patch adds $simparam and $simparam$str from Verilog-A.
The analog simulator parameters return 0.0 or N/A. The
vvp_cpu_wordsize system function has been moved into the
$simparam call and is now named CPUWordSize.
This patch also starts the factoring of common code in the
vpi directory. Some routines were renamed.
The priv.c file was renamed to sys_priv.c to match the
include file.
System functions can now have strings put to their output.
Rather then join islands while branches are initially created, save the
island creating for the end. This way, the process is actually recursive
and greedy, reliably collecting branches into islands without conflict.
Fold the bi-directional part select into the pass switch (tran) support
so that it can be really bi-directional. This involves adding a new
tranvp device that does part select in tran islands, and reworking the
tran island resolution to handle non-identical nodes. This will be needed
for resistive tran devices anyhow.
The draw_net_input function is modified to account for nexus that is
a port of an island. Draw the ports (and the islands if necessary)
to the island and use the port output for the nexus instead of the
port input. This allows the bi-directional behavior of the port to
interpose itself in the data flow.
In this process of these changes, the draw_net_input function was
reorganized, and all the considerable amount of code for it was
moved to a file of its own. (vvp_scope.c is pretty unruly.)
NetTran devices must be collected into islands because they are all
a bi-directional mass. This is how vvp will process them and the code
generator will need a head start organizing them.
The vvp_island classes are added, as well as support for tranif nodes
that use this concept. The result is a working implementation for
tranif0 and tranif1.
In the process, the symbol table functions were cleaned up and made
into templates for better type safety, and the vvp_net_ptr_t was
generalized so that it can be used by the branches in the island
implementation.
Also fix up the array handling to use the better symbol table support,
and to remember to clear its own table when linking is done.
The code generator was reading the wrong node of a bi-directional
part select. This happens exclusively with part selects passed to
bi-directional ports, so was rare. The result was that the non-part
selected part may get an incorrect value.
The multiply runs does not need to do all the combinations of digit
products, because the higher ones cannot add into the result. Fix the
iteration to limit the scan.
ivl_switch_scope, ivl_switch_attr_cnt and ivl_switch_attr_val
are non-existent routines and should not be in ivl.def. I also
removed them from ivl_target.h. Cygwin expects that if a routine
is listed in ivl.def that it will find a real implementation.
My previous patch always used an empty file if git was not
available. This patch extends this to use the existing
version.h file if it exists (snapshot, etc.)
The handling of immediate add used to do 16bits at a time. When it went
up to 32bits, the need to work in chunks vanished, but the chunk handling
was still there, this time shifting by 32, which causes problems on 32bit
machines. Simplify the %addi handling to avoid this.
Clarify that operands are typically 32bits, and have the code generator
make better use of this.
Also improve the %movi implementation to work well with marger vectors.
Add the %andi instruction to use immediate operands.
Use high radix long division to take advantage of the divide hardware
of the host computer. It looks brute force at first glance, but since
it is using the optimized arithmetic of the host processor, it is much
faster then implementing "fast" algorithms the hard way.
This instruction adds an integer value to the value being loaded. This
optimization uses subarrays instead of the += operator. This is faster
because the value is best loaded into the vector as a subarray anyhow.
The AND and OR operators for vvp_bit4_t are slightly tweaked to be
lighter and inlinable.
The vvp_vector4_t::set_bit is optimized to do less silly mask fiddling.
This involves defining the API for switches and cleaning up the
elaborated form to match the defined ivl_target API. Also add t-dll
code to support the ivl_switch_t functions, and add stub code that
checks the results.
When processing wide vectors of these operations, it pays to process
them as vectors. This improves run-time performance. Have the run time
select vectorized or not based on the vector width.
Improve vvp_vector4_t methods copy_bits and the part selecting constructor
to make better use of vector words. Eliminate bit-by-bit processing by
these methods to take advantage of host processor words.
Improve vthread_bits_to_vector to use these improved methods and Update
the %load/av and %set/v instructions to take advantage of these changes.
The MinGW system() implementation appears to return the straight
return value instead of the waitpid() like result that more
normal systems return. Because of this just return the system()
result without processing for MinGW compilations.
Older version of the MinGW runtime (pre 3.14) just used the
underlying vsnprintf(). Which has some problems. The 3.14 version
has some nice improvements, but it has a sever bug when processing
"%*.*f", -1, -1, <some_real_value>. Because of this we need to use
the underlying version without the enhancements for now.
snprintf prints %p differently than the other printf routines
so use _snprintf to get consistent results.
Only build the PDF files if both man and ps2pdf exist.
MinGW does not know about the z modifier for %d, %u, etc.
Add some missing Makefile check targets.
These instructions can take advantage of the much optimized
vector_to_array function to do their arithmetic work quickly and
punt on X very quickly if needed. This helps some benchmarks.
If the select of a MUXZ is constant 0 or 1, then we can elide the MUX
in place of a simple BUFZ. This should allow the dead code on the
unused side to be removed as well.
Functions like $monitor need to attach callbacks to array words if
those words are to be monitored. Have the array hold all the callbacks
for words in the array, under the assumption that the monitored words
are sparse.
Array words don't have a vpiHandle with a label, so the %vpi_call
needs a special syntac for arguments that reference array words.
This syntax creates an array word reference that persists and can
be used at a VPI object by system tasks.
Memory words may have part selects assigned, but the code messed up
the testing for the validity of the part select base. This fixes do
detect constant bases so that base validity tests are handled at
compile time.
The tran devices include tran, rtran, tranif0/1 and rtranif0/1. These
are all elaborated as options on a NetTran device. It is still not
clear the best way to present tran devices via the ivl_target.h API.
Add include statements (<cstdlib> for abort()) and a cast.
Necessary and sufficient for successful compilation with
gcc-4.3 (Debian 4.3.0-4) 4.3.1 20080501 (prerelease)
The draw_input_from_net function was being used to access words of
a var array, which doesn't work. Have the draw_input_from_net punt
on that case, and by the way the mux inputs don't need to use that
function, instead they should use the general draw_net_input function
to get the input labels.
It is possible for an array to have 1 word in it, so using the array
count to detect an array is incorrect. Use the ivl_signal_dimensions
function, which is there exactly for that purpose.
Before this, the types of parameters were always logic, only the
width and signed-ness could be controlled. A parameter may take
on implicit real values if the expression were real.
With this patch, the type for the parameter can be explicitly set
to logic or real. This also means that the parameter real valued
expressions need to be more crefully treated, possibly with casting
integral expressions to real values, or real expressions to integral
values.
It is possible for the code generator to create .array/port objects
before the .array object that the port refereces, so use the resolv_list
to arrange for binding during cleanup.
Save tons of space per memory word by not creating a vpi handle for
each and every word of a variable array. (Net arrays still get a
vpiHandle for every word.) The consequence of this is that all
accesses to a variable array need to go through the indexing.
This commit handles the most common places where this impacts, but
there are still problems.
vpi_handle_by_name() was assuming it was always given a valid scope
object. In the context of vpi_chk_error() this is not required and
some users use/abuse the interface by calling the function with invalid
objects expecting a 0 return value. This patch adds an explicit check
for the supported types vpiScope and as an extension vpiModule.
Anything else should be flagged as an error once we have vpi_chk_error()
implemented, but for now it just returns 0.
The arguments to $ungetc() were backwards! This patch fixes that
and adds a bit more checking to the compile_tf routine. It still
needs more work, but that can wait for the major system function
clean up I have planned when I can find the time.
It is a quirk of the $signed() system function that the argument
is converted to signed, but the operation that is performed is
not changed. So arithmetic operators on unsigned arguments inside
a $signed() expression still perform unsigned arithmetic.
The pform is now translated/elaborated into NetScope objects. All that
remains is to check the parameter values against the ranges. This is
to be done in the evaluate_parameters() method.
A recent change to sb_to_idx() made it return a signed value
where it previously returned an unsigned value. This patch adds
explicit casts to remove the two signed vs unsigned comparison
warning messages.
Handle parameter value ranges as far as the pform. The +-inf expressions
are not handled yet, nor is the single value exclude, but the other
cases are handled.
The VAMS-2.2 LRM syntax does not include a semicolon after the nature/
discipline name, but the 2.3 LRM does. Effectively, that means that
the simicolon is option from now on.
Fix
elab_expr.cc:1561: warning: comparison between signed and unsigned integer expressions
caused by revised prototype of NetNet::sb_to_idx() in
commit dfb7bf5211
Pform parse enough of the natures that they can be mapped and the
disciplines can bind to them. Since Verilog-AMS expects natures to
be declared before use, we can do the binding early.
The VAMS-2.3 specification says that discipline and nature declarations
have a semi-colon after the identifier, but the disciplines.vams in
the appendix does not. Initial guess what that the disciplines.vams
is correct, but I've been told that the syntax is correct and the
disciplines.vams file is not.
Parse discipline declarations, net discipline declarations, and
analog contribution statements. Don't yet do anything useful with
these, just give a sorry message where they are encountered.
This is part of the standard disciplines header file, with enough
syntax to part the natures and disciplines included. Don't do anything
with the parse results yet.
The Verilog LRM specifies that it is legal to give constant part
selects that are beyond the bounds of the identifier being selected.
But elaboration was flagging that as an error. This patch changes it
to a warning, and handles the cases by generating 'bx bits as needed.
The elaborator improperly allowed user function call nodes to take on
the expression width requested of them. The result was that generated
code had junk pad bits in certain cases.
When calculating 0^z with constant arguments, make sure the result is
x. This problem only happens when the arguments are constants and the
expression is calculated at compile time.
Verilog does not allow macro expansion in strings, and that's that.
But sometimes people want strings of a macro expansion, so add a
stringify syntax that does the trick.
Verilog-AMS supports scaled real numbers, where the "e<N>" (scientific
notation) is replaced with engineering scales from "a" (atto-) to
m (milli-) and "K" (kilo-) to "T" (tera-). This syntax can be handled
way down in the lexor.
IEEE1364 has specific names for the various generations of Verilog that
are supported. Icarus Verilog should stick to those names for selection
the language feature set.
In the process, the extensions that were tied to the 2x generations
are pulled out out and given their own enable flags. The makes all the
feature control more regular and understandable.
This patch adds a new system function $vvp_cpu_wordsize. It returns
the size of the underlying CPU word (long) in bits. This function
can be used to write fully portable tests for the test suite. Other
functions will be added as needed.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
Fix when sign extending an expression that the result is also signed.
This bug caused some arithmetic operations (with extended arguments)
to not notice that they are signed.
Also be more robust in noticing that comparisons are signed and should
generate the right code.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
In continuous assign expressions, the abs() operator can't easily be
burried in generic unary handling, so add the IVL_LPM_ABS type and
generate it as needed.
The va_math module implements functions that are optional in base
Verilog but included in Verilog-AMS. So automatically include the
module if -gverilog-ams is given.
The va_math module implements functions that are optional in base
Verilog but included in Verilog-AMS. So automatically include the
module if -gverilog-ams is given.
Implement in behavioral the abs/min/max operators for real values.
The parser treats these builtin functions as operators, unary or
binary, and elaborates them appropriately.
Also add enough code generator support to handle real valued expressions
in thread context.
Verilog-2005 defines the base-10 log function to be $log10. This makes
sense because in C the log() function is the natural log. So add the
$log10 function.
Since there may be legacy code that uses the $log function, leave it
defined, but we should consider at least printing a warning when the
$log function is used.
Verilog-AMS recommends that users use the system-function style
math functions, but supports traditional style math functions for
portability. Add the keywords and parse the traditional Verilog-A
functions, and handle them as calls to the equivilent system
function.
Add the -gverilog-ams flag to the driver, and the begin_keywords support
for VAMS-2.3 keywords. With this, the infrastructure is in place to
start pulling in features from Verilog-AMS.
The begin_keywords directives manage a mask of keyword sets that are
active at a given moment. This patch makes the lexor actually test
the given keyword against the mask. If it matches, return the keyword
id, if it is disabled then it is an IDENTIFIER.
Package builders/managers find the DESTDIR variable convenient for
installing into a temporary target for building a package. This adds
the DESTDIR varilable to the root makefile.
Also, clean up the verilog.spec file to reduce redundancy so that
maintence for releases is easier.
1364-2001 does not allow a replication count of zero, but
1364-2005 allows them when the replication is enclosed in
a concatenation with other valid bits. This patch adds
code to perform these checks for procedural expressions.
Because of the NetNet object must have a width greater
than zero a replication used in a continuous assignment
can never have a count of zero.
This patch makes sure that objects either support vpiFile
and vpiLineNo or adds dummy code so that a runtime error
will not occur when accessing these properties. It also
returns 1 for the size of real variables and adds a
simplified vpiIndex that matches the Memory interface.
The begin_keywords directive allows the source code to select keyword
subsets so that a bit of code that uses identifiers that class with a
newer version of the standard can still be compiled.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
The va_math.vpi module implements systen-function versions of the
Verilog-A math functions. This library was contributed by Cary R.
Also add the constants.vams include file. This is pretty much
direct from the Verilog-AMS LRM.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
This patch does a better job of recovering from an error in a
task or function definition. This prevents the compiler from
printing many irrelevant error messages.
This patch adds the functionality to tasks/functions to handle the
declaration of multiple ports using a single ANSI declaration. It
also deletes the old range vector before it adds the new one. The
tasks and functions are different than modules so we need to copy
the range for them.
Several places in Icarus Verilog try to get the bits of the integer
part of a double by casting to unsigned or unsigned long. But that
causes some compilers to generate smart code that converts all values
less then 0 to 0, even though we are after the bits, not the math
value. So be careful to do this cast only to non-negative values and
uminus the bits if necessary to get exactly what we want.
Signed-off-by: Stephen Williams <[email protected]>
Fix handling of cases where multiple specified delays are activated
for a given output. Need to apply the standard selection criteria
that gets the minimum value.
The %sub instruction didn't have the efficent implementation that
the %add instructions used. Update subtraction to use the array
method, so that it gets the same performance benefits.
The vvp_vector4_t often receives the results of vector arithmetic.
Add an optimized method for setting that data into the vector. Take
into account that arithmetic results have no X/Z bits, etc.
Logical and/or take as inputs condition expressions, which are scalar
expressions. Be sure to reduce vectors using proper logic to get the
right condition value.
This patch adds check to determine if an always block has delay
in it or not. If there is no delay a runtime infinite loop will
occur. For the indeterminate case it will print a warning message
if the new -Winfloop flag is given. This flag is not part of the
-Wall check!
When generating a real expression you can have bits of the
expression that use vector only operands. When this happens
evaluate that part of the expression as a vector and then
convert it to a real value.
On some systems, 1UL<<X will make a mess if X is the size of
an unsigned long. This especially seems to be a problem on i386
systems. Protect those shifts in the vvp_net.cc.
When left-shifting unsized constants in self-determined contexts, the
constant value is normally pared down to its minimum required width.
But this practically guarantees loss of bits. Instead, detect this
special case and give the unsized constant a width of an integer.
Still allow for the super-special case that the shifted value and the
shift amount are constants. In that case, the result width (and value)
can be calculated precisely and there is no need to resort to default
widths.
This patch uses the true delay expression count not the truncated
one to check that the number of delay expressions is correct.
It also prints the actual number of expressions it found when
printing the error message.
By slightly altering the vvp_bit4_t encoding, a few simple
optimizations become possible. By making Z==2 and X==3, the
conversion from X/Z to X is a simple shift-or, and this can
be used to reduce the size of some of the bit4 operators.
In previous incarnations of the vvp runtime, bit vectors were passed
around as arrays of unsigned char that charried bit4 vectors. That
is no longer used. Remove the last vestiges of that dead code.
Remove dependencies on vvp_bit4_encoding outside of the vvp_net
core types. The table_functor_s class was the worst offfender and
was barely used, so it is now removed completely. There are a few
opcodes in vhtread.cc that also make vvvp_bit4_t encoding
assumptions (and used casts) and those have been fixed. There
were also various VPI interface functions that are fixed.
The vvp_vector4_t holds 4-value logic. This patch changes the encoding
of 4-value bits in the vector to use separate A- and B bit vectors,
with the B- vector signaling the A- bits that are not 0/1. This
allows rapid conversion to 2-value logic, and rapid tests for X
and Z values.
Update the rules for parsing user function definitions to allow
Verilog-2001 ANSI style port declarations. In the process, also
unify with the user task port declaration so that the types don't
diverge. The rules are the same for both, with the extra constraint
that function ports must all be input. This latter rule is checked
later, during elaboration, so that the task/function pform code
can be shared, and better error messages can be generated.
This patch fixes deassign to allow it to unlink from a driver.
It also zeros the cassign_link and force_link pointers after
they have been unlinked. Not doing this will cause an assert
if deassign/release are called multiple times (variable only).
commonly, the make install is run in a compiled directory by a
different user (i.e. an administrator) that doesn't necessarily
have write access to the build directory. This patch fixes it so
that the test that the version.h is up to date doesn't need to
write a temporary file in the build directory.
It also makes sure that if there is a real need to update the
verion.h, and it is not writable, then properly fail the build.
Passing preprocessor definitions forward into library cells was broken
by this bug in processing the precompiled macro values that were written
by the main preprocessor.
Detect thread bit allocation failures and fail gracefully. Print an
error message that points at the expression in question, and return
with an error code so that the compiler exits with an error.
When constant values are added to get another constant value, and the
expression is not otherwise a fixed size, then trim the result to
prevent unbounded expansion of unsized expression with.
In the process, find and fix a bug in the vtrim function that caused
an assert if trimming were not possible for an unsigned value.
This patch fixes the elaboration of parameters in a continuous
assignment to only pad the constants to their defined width.
Previously they were padded to the l-value width which resulted
in a vvp runtime error. This appears to be because the width
for padding is the defined width, but the constant is printed
using its internal width which previously could be larger than
its defined width.
These constants are local nets so I added that flag as well.
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
When printing the strength information for a multi bit net this patch
adds an underscore between the individual bit strength values. This
makes it easier to see the individual bit values.
A patch to insert the version string from git broke compilation when
the source was not a git repository or when building in a read-only
source tree. This patch avoids breaking compilation by using a
graceful failure mechanism for generating the version string and does
not write to the source tree.
Rework the MUXZ and MUXR code to use an enum instead of plain
integers for the select input state. This makes it more obvious
what is actually going on.
This patch adds a flag to the MUXZ object to make sure that it will
run at time zero if needed. If this is not done the default Z result
may not be overridden by an X result.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
This patch removes the overly optimistic lookaside save for a signal
that has been set (%set/v). This is incorrect because if a force or
assign are active the value will not be set as expected.
Parameters with vector descriptions that are not zero based and
are used in net contexts should generate the properly ranged
temporary signals. This causes subsequent part selects to work
out properly.
During elaborate_sig, the code to detect implicit wires did not
properly account for the possibility that the name is that of an
explicitly declared parameter.
This patch add (I believe back in) the < and > characters to the
general T_SYMBOL regular expression. The match was also moved after
the special T_SYMBOL cases so that flex would match them correctly.
Flex matching rules are longest or if a tie the first.
This patch adds code to prevent the broken synthesis code in
the development branch from core dumping. Broken code here
refers to the Icarus code not a Verilog file.
This patch fixes a delete[] vs free problem in the NexusSet
class. The items_ array was being allocated with malloc/realloc
and freed with delete[]. The quick fix was to replace delete[]
with a call to free(). A better fix would probably be to rework
the class to use a vector.
The default nettype was not always being set. This patch
modifies the NetScope constructor to get the default
nettype from a parent if it exists. It is set to NONE if
a parent does not exist.
This patch fixes some allocation problems (mostly in the parser
and lexor relating to identifiers). It also fixes a couple places
where uninitialized variables were used. All found with valgrind.
There are still 100 tests that have problems. Many of these appear
to be related.
Macro argument substitution used to just use strstr() to
find an argument that needed to be substituted. This is too
aggressive. It would do argument substitution in the middle
of keywords and other identifiers. A new routine is used
that verifies the character preceding the match is not
a normal identifier character [a-zA-Z0-9_$].
Binary bit based operators were not padding arguments if they had
different widths. The reduction operators and ! were not correctly
evaluating their arguments in a self-determined context.
vvp did not have the ability to handle real parameters.
This patch fixes that omission. Parameters are only used
by vpi calls to get compile time information.
Problems with signed expressions that are set to parameters and
that include multipliciation exposed a few bugs in the calculation
of signed multiply. Fix this and add some improved diagnostics.
It is questionable, but probably legal, for expressions passed as
arguments to input ports of various kinds of gates to implicitly
declare nets. This patch allows the scan through different types
of expressions for implicit nets.
The elaborate_sig handling here does not test for the legality of
having a non-trivial expression as argument to a port. For example,
it is definitely NOT legal to have r-value expressions passed to
output or inout ports. But that will be checked for later when the
instance is elaborated for real.
Threads used to be deleted when they finished processing code.
The problem with this is that some of the code could be
rescheduled to run at rosync ($strobe, etc.). This allowed the
thread data the code depended on to be reaped too soon. This
patch uses a new queue to schedule thread deletion. The queue
is processed after rosync has finished.
This patch makes the muxz and muxr functors schedule events
instead of directly calling vvp_send_*(). This prevents the
code from going into an infinite loop when the output feeds
back to the select.
This patch only applies to the ternary operator when used in a
continuous assignment. It adds short circuiting when the expression
is a constant true or false. It does not optimize the special case of
a constant 'bx expression with constant T/F expressions.
This patch enhances dump() for function definitions, by indicating a
signed result with a prepended "+" and also printing the MSB and LSB.
This matches other dump() routines. It also prints the arguments with
the same information. The arguments also include their type "input",
"output" or "inout".
If implicit nets are declared during elaboration, then the success
of binding during elaboration will depend on the order of the code
in the source file.
The dup_expr() function for NetESignal was not copying the word_
expression. This would cause an individual array access to turn
into an entire array access. The file and line information was
also not being set correctly.
An assert() in tgt-vvp/eval_expr.c was also replaced with an
exit() since the appropriate information was already being
printed.
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
The IVL_EX_NONE type was not displaying any message and default did not
use the new ivl_expr_{file,lineno} functions to get the source location.
This patch remedies these problems.
vpi_put_value can mimic force and release with vpiForceFlag and
vpiReleaseFlag flags to the vpi_put_value call. With this patch,
the infrastructure is added to allow the flags argument to be passed
to the dispatched put_value function, and for signals handle those
flags as force/release of a net.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
When a bit port of a module instance is connected to a vector
argument, the MSB module instance should be connected to the MSB
of the vector argument. This matters only in the rare case that
the %m is used. It also makes wave dumps come out right.
The updates to the do_include code destroyed the
handling of absolute paths; all of the code that
handles buffer-switching was erroneously placed
in just the relative-path branch. Thanks go to
Cary R. for pointing out the problem.
Now the common code has been extracted yet again,
and the notorious goto statement has been used
in favor redundancy.
The test vvp_reg.pl produces the same output as
before, so hopefully nothing new is broken.
Signed-off-by: Michael Witten <[email protected]>
Normally processes are found in the lexical scope of a module, but
there are special cases where processes (other then task/function
definitions) are in other lexical scopes. The most likely case is
initilizations that are in the lexical scope where the assigned
variable is declared.
In the process, the behaviors list is kept in the base PScope class
instead of the Module or any other derived lexical scope class.
Case-generate alternatives create sub-scopes that need to be scanned
by the scope scanner in order to get function definitions etc. that
are defined lexically within generated scopes.
This patch converts a constant real index to an integer value when
defining an array. This can happen when using 2**8 which returns a
real value since the operands are signed.
draw_number_bool64() in tgt-vvp/eval_bool.c was using %ix/load to
load immediate values into registers greater than three. The problem
was that of_IX_LOAD() in vvp/vthread.cc was masking off the upper
bits. This was putting the results in the wrong register. This patch
removes the bit masking from of_IX_LOAD() and updates the %ix/load
documentation.
The file lexor.lex was beginning to suffer a catastrophic
increase in entropy due mainly to the mingling of spaces
and tabs--an age-old problem that often finds itself as
the subject of many a religious war.
The key rule: Make it consistent in as many editors as
possible; this was achieved by converting all hard tabs
into soft tabs (composed of spaces) of width 4.
I couldn't help but make modifications to the code as I
tabifified, but most of the changes are strictly style.
While maintainers generally treat large scale whitespace and
formatting changes with much caution, I believe that the code
is now much more maintainable; moreover, the test suite
produces the same results as before.
Signed-off-by: Michael Witten <[email protected]>
Macro names cannot be compiler directive names.
Such trespasses are now recognized and reported:
(1) Offending `define lines are skipped.
(2) Offending macros meant to be expanded
are replaced with nothing.
Signed-off-by: Michael Witten <[email protected]>
Move the storage of wires (signals) out of the Module class into
the PScope base class, and instead of putting the PWires all into
the Module object, distribute them into the various lexical scopes
(derived from PScope) so that the wire names do not need to carry
scope information.
This required some rewiring of elaboration of signals, and rewriting
of lexical scope handling.
The ordering of the logic was a little strange before.
Also, there were unnecessary operations, like the assert
and the include_dir[0]=0 business.
Signed-off-by: Michael Witten <[email protected]>
Discussions online and "standards" documents are never
conclusive, but the code that was present suggests that
iverilog adopts the sane practice of resolving relative
paths against the directory of the file that is currently
being processed.
Unfortunately, when a relative path is made absolute, the
code forgot to update the necessary include_stack_t object.
This has now been fixed.
Signed-off-by: Michael Witten <[email protected]>
When the lexical analyzer encounters and EOF, the
analyzer invokes yywrap() to determine what to do
next. The function determines one of two paths of
execution:
(1) If yywrap() returns 0, then the analyzer
assumes that yywrap() has setup a new input
source, and so scanning continues.
(2) If yywrap() returns non-zero, then the analyzer
assumes that yywrap() has not setup a new input
source, and so the analyzer proceeds to run the
matching EOF action (the default of which invokes
yyterminate()).
NOTE: The analyzer does not touch the start condition.
The old implementation was using yywrap() to destroy the current
input source and setup the next one. However, this causes problems
when the analyzer is in the middle of parsing some directive:
(1) Because yywrap() is called before any EOF action,
the include_stack_t structure is destroyed before
being used in the EOF action; the result is a segfault.
(2) Because yywrap() does not change the start condition,
any EOF action would occur completely out of context;
however, because of (1), this problem never cropped
up.
The new implementation simply:
(1) Employs "%option noyywrap", which effectively causes
the analyzer to act as though yywrap() produces a non-zero.
(2) Renames yywrap "load_next_input".
(3) Calls load_next_input() explicitly in exhaustive EOF actions,
so that control is more fine grained.
The added benefit is that the code that finishes parsing EOF terminated
directives now works properly; `include and `define directives previously
segfaulted in such situations.
Signed-off-by: Michael Witten <[email protected]>
This variable was used in yywrap purportedly to obviate
hidden access to a file that should be closable.
After investigating the code flex produces, it would
seem that these fears are unfounded.
Signed-off-by: Michael Witten <[email protected]>
The verilog preprocessing language is sufficiently simple
that the parser may be implemented by hand on top of the
lexical analyzer.
In fact, ivlpp was already implemented in this way; relevant
[bison] parser files specified no grammar, and the parser
entry-point (yyparse) was simply an indirect use of the lexical
analyzer (yylex).
Therefore, parse.y has been removed, invocations of yyparse()
have been replaced by yylex(), references to bison generated
files have been removed, and Makefile.in has been updated
accordingly.
Signed-off-by: Michael Witten <[email protected]>
This patch fixes two problems. The first is that thr_check_addr()
was being used inconsistently. It should be passed a real address,
but the resize of the vector should be at least one more than this
address. The extra and unneeded CPU_WORD_BITS was also removed
from the routine.
The second problem involved an invalid memory access in
vvp_vector4_t::set_vec() when the vector being copied was an integer
multiple of the machine word width. Under this condition there would
be no remaining bits that needed to be copied but the routine was always
trying to copying some remaining bits. This code is now only executed
when there is a remainder.
Neither of these appear to be causing runtime problems. The second one
was found with valgrind. The first were found while tracking down the
second problem.
All the pform objects that represent lexical scope now are derived
from the PScope class, and are kept in a lexical_scope table so that
the scope can be managed.
This patch adds support for delaying constants at time zero. It also
cleans up the code in elab_net.cc to use this capability instead of
building it with an extra BUFZ to carry the delay information.
Modules, functions and tasks are named scopes so derive them all
from the PScope base class. These items all take scoped items, so
the eventual plan is to move these items into PScope.
This patch adds a real error message instead of an assert when
someone attempts to release a part or bit select. I plan to work
on the real functionality soon.
This patch adds the power operator for signed bit based values
in a continuous assignment. It also fixes a few other power
expression width problems. The expression width is still not
calculated correctly, since the correct method can produce huge
possible bit widths. The result is currently limited to the width
of the native long. This is because lround() is used to convert
from a double to an integer. A check in the code generator protects
the runtime from this limitation.
Generate case is a complex generate scheme where the items are
sub-schemes of the case generate itself. The parser handles them
something like nested generate statements, but storing the case
guards as the test expression. Then the elaborator notes the
case scheme and reaches into the case item schemes inside to make
up tests, select the generate item, and elaborate.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
User functions called in a continuous assignment were not getting
their scope mangled. This is needed to handle arrayed instances and
possibly other things.
This patch fixes some bugs in the implementation of signed integer
division with wide operands in constant expressions and adds support
for signed integer modulus with wide operands in constant expressions.
It also removes a few redundant lines of code.
Incorrect trimming of unsigned verinum values was causing the
compilers unsigned constant verinum pow function to give
incorrect results. This patch restores the pow compile time
optimization and fixes the trimming to always leave a single
zero in the MSB.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
Currently, if a localparam declaration does not include a type or
range, the RHS expression is cast to an unsigned value. This patch
changes this to make the localparam inherit the type of the RHS
expression, as is done for parameter declarations and is specified
by the Verilog-2001 standard.
This patch adds a check and prints a warning message when the power
operator is used with unsigned bit based values. It also fixes a couple
of typos and adds an asserts if the above power operator happens to
get to the tgt-vvp back end.
Fallout from me trying to understand the origin of pr1780480
and pr1830834. Too bad I don't understand c++ and vvp as
well as I understand English!
(Spelling and grammer fixes in comments. -ed.)
vvp/main.cc was including asm/page.h on GNU/Linux
systems, though that file does not often exist and
is not necessary.
Signed-off-by: Michael Witten <[email protected]>
Padding and continuous assignment caused problems if the continuous
assignment includes a delay. The problem is that the padding was
not necessarily included in the delay. Rework the elaboration to
make sure the padding is indeed included in the delay.
This patch adds some checks to verify that shifts, the reduction
operators and the bit wise operators are not used with real values.
It also includes a few other cleanups.
This patch makes sure the delay is calculated correctly when only some
of the bits change and you are comparing against the initial (t0) value.
Basically you have to check the initial value against all the bits in
the new signal not just the first bit since the order that bits change
is not deterministic.
This patch add delays in continuous assignments for the shift operators,
concatenations and replications. It also reports an error if the user
attempts to take the modulus of a real value.
This patch uncovers a couple other problems in the system. I am trying
to fix one of them. I will report the other problem shortly.
This patch fixes some of the delays in bit based continuous
assignments (unary -, unary +constants, string constants,
reduction operators and user functions).
Use draw_lpm_output_delay() in all functions that need it.
Addresses pr1879226 on a couple of levels. Analysis:
NetNet* PEBinary::elaborate_net_shift_() didn't flag dist==lwidth
as a case where all bits of the input are shifted away, which made
it create a real concatenator for this case. It attempted to create
NetNet*tmp with zero width, which doesn't work; (lsb,msb) ends up
as (0,-1), which is later interpreted as a 2-bit wide net.
Added an assert to the NetNet constructor to catch any other lurking
attempts to create zero-width nets.
Added short-circuit code to handle the case where all bits of the input
are shifted away. This case used to be "handled" by an assert failure.
When used in continuous assignments, user defined functions may have
delayed output. Handle that by generating the proper .delay node when
needed to delay the output of a .ufunc node.
Allow user defined functions to take real value arguments and return
real value results in net contexts. Use the data type of the nets
attached to the ports to define the data types of the arguments and
return value.
There was much redundant code in the compile-tile handling of the
less-then and greater-then of constant expressions, and much of it
was buggy. Unify much of the code and squeeze out the bugs so that
compile-time evaluations come out correctly.
The compiler attempts to precalculate the results of <= comparisons.
Fix a few corner cases where the arguments are signed. Also fix the
important test of constant against non-constant where we try to test
if the non-constant value can possibly make the test fail.
When conditional delays are in use, it is sometimes possible for there
to be no delays available for a given input event. In that case, skip
the delay processing for that case instead of crashing.
Previously only the logical operators (~, &, |, ^, etc.) supported a
delayed value in a continuous assignment. This patch should extend this
to all operators. An extensive check of real values was done. The same
will be done shortly for bit based nets.
Checks for constructs currently unsupported in continuous assignments
provide a more explicit message (** operator, real user functions,
{!, && and ||} operators with a real argument).
Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
The continuous assignment multiply expands vectors to the sum
of the two widths. This is correct for bit based vectors, but
for real variables it should always be one bit wide.
The sys_funcs table should be left to those functions that are handled
internally by the compiler. Really, the internal sys_funcs table is a
legacy from the days before the compiler supported system function
tables in the .sft format.
System functions used in a continuous assignment must be defined
in the system function table since the name of the system functions
is kept in this definition. The default name is NULL which causes
problems. This patch add $rtoi to the system table and adds a check
for a NULL name.
The comment that shows the intended value for real constants was
being printed with a %f. This is wrong for large or small values.
This patch changes the %f to a %g to get more consistent results.
A right shift may generate extra bits to preserve the proper shift
characteristic. This patch replaces the assert that was forcing the
input vector to not be greater than the input port width with code
to only select the required lower bits from the vector if it is
larger than the input port.
This patch adds support for the following statement:
<vector>[<i>] <= #<delay> <value>.
It is a copy with slight modification of code from the next
else/if clause.
The nodangle functor tries to delete NetNet objects that are not used.
But NetNet objects that are addressed by a NetArrayDq should never be
dangling. So make sure the NetArrayDq marks the target NetNet correctly.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
In nets, if system functions return a real value the function lookup
was getting the correct width, but was also setting the width to 0,
which confused down-stream net handling. Real-value system fuctions
have a width of 1. (1 real-valued scalar.)
This patch modifies the conversion functions $rtoi, $itor,
$realtobits and $bitstoreal calltf routines to be more efficient.
This is done by caching the vpiHandle to the argument in the userdata
pointer. This eliminated the need to get the argument iterator, scan
and free the iterator.
It also updates the error messages to use the new file and line
number information that is available for system functions. It also
adds a check that verifies the functions are only called with one
argument and makes the errors fatal.
This patch schedules the input value change to .sfuns calls to avoid
potential recursion problems. It also cleans up two put_value calls
that did unneeded loops when putting VectorVals and the width was
greaten than 32 bits.
This patch adds a new flag to vvp "-n" that can be used to make
$stop and hence <Control-C> act like $finish. This may be desired
when using vvp in a non-interactive environment.
tgt-vvp/eval_expr.c uninitialized variables
vpi/sys_display.c uninitialized variables
vvp/vpi_priv.cc deprecated string constant usage
vvp/vpi_vthr_vector.cc deprecated string constant usage
the last entry invokes vpip_name_string() and uses const char *
in the same way as the other 9 callers in vvp/*.cc, the only
difference is that the argument is static instead of computed.
cvs -z3 -d:pserver:[email protected]:/cvsroot/gtkwave co -P gtkwave3
delete CVS logs embedded in files
had to add #define wave_alloca alloca to lxt2_write.h
differences remain relative to upstream .h files:
whitespace
value chosen for LXT*_WR_SYMPRIME
Regarding the latter, Tony writes "Don't worry about the .h file.
The only difference is a considerably larger initial hash size.
If this isn't a problem with Icarus now, it certainly doesn't
need to be bumped up."
Fix data type handling of module ports. When ports are declared
as ports and given data types in different statements, the parser
incorrectly (and silently) dropped the intended data type for the
default LOGIC type.
Rework the ivl_file_table_* interface to be more generic and easier
to use. Also all the vvp examples except for memory.vvp have been
fixed to run correctly with the current vvp. Someone with a bit more
experience will need to fix memory.vvp.
Add the vpiFile and vpiLineNo properties to system functions.
Most other objects have stubs that return "N/A"/0. Interactive
functions (called from the debugger) use <interactive> for the
file name.
Use the precompiled defines file support of the ivlpp preprocessor
to pass defines made in the main program to processed library modules.
In other words, a `define in the Verilog source will be visible to
library modules.
Core preprocessor support for writing out and reading precompiled
defines. The preprocessor can read initial precompiled defines from
any number of specified source files, and can write all the defines
into a specified output file.
With this change, local symbols are not emitted in the vvp target,
but are marked as local. When thus marked, the vvp run time does not
offfer any VPI access and the signals (net or var) are effectively
invisible.
Zero-based part selects are a special case that is handled with
optimized code. Properly handle the part select width to get the
desired padding.
Signed-off-by: Stephen Williams <[email protected]>
The code to handle real functions using the PLI 1 interface was
missing some functionality. This patch fixes that and fixes a
bug in the veriuser.h include file.
The recent changes to vpi_get_str had a minor problem that was
causing a core dump when trying to get the vpiFullName of an
arrayed signal. Basically vpi_get_str is not reentrant so the
name must be duplicated. It must also be duplicated to work with
the free in the code (do not free a result_buf).
Add support for a default, standard, implicit include directory
in the base directory for the ivl installation, where standardized
Verilog header files may be placed.
Rework the handling of file names to use a perm_string heap to hold
the file names, instead of the custom file name heap in the lexor.
Also rename the get_line to get_fileline to reflect its real duties.
This latter chage touched a lot of files.
Gets rid of a few warning: deprecated conversion from string
constant to 'char*', follows IEEE 1364-2001C 27.10 in more cases,
and fixes at least one real bug (look at the previous use of
strdup/strcat in real_var_get_str() and signal_get_str()).
When evaluating bitwise binary expressions at compile time, get the
signed/unsigned padding correct. Pay special attention to the case
of $signed/$unsigned changing the signedness of the operand.
Prevent an overflow of command line flags if the -Wall argument
is used multiple times, and fix processing of individual flags
that may be in the beginning of the warnings flag buffer.
When user defined function calls are withing a $signed, the result
needs to be properly padded. To make this work, handle padding of
a function result exactly type the padding of a signal vector. this
is natural in that the function return value *is* in a signal vector.
This fixes pr1841300.
This patch fixes the calculation of the scope type in draw_scope.
This code is really only used in the VCD dumper so I commented it
out in the other two. The problem was that the lower scope was
used to calculate the scope type. It is also now an error to try
to draw an invalid scope type.
This patch fixes a number of problems associated with the various dumpers.
1. It catches the problem uncovered in pr1809904 and prevents the core
dumps from happening. It prints a warning message if you try to change
the file after the program has started dumping data to the file.
2. It makes all the dumpers work in the same manner. Before the VCD
$dumpfile was processed at compile time, but the LXT/LXT2 versions
did this at run time. The correct place for this is the run time so
that you can pass the task a calculated name.
3. All the dumpers use common compiletf routines located in vcd_priv.c
4. Make the LXT/LXT2 $dumpfile commands only get the file name and
let $dumpvars actually open the file. This matches the VCD code.
5. Fix the $dumpfile code to allow calculated file names.
6. Make dumpvars without a scope/variable match all toplevel modules
not just the toplevel module the $dumpvars was located in. This
now matches the standard (2001).
7. Simplify the no dumper code (vcdoff.c) and add missing functions.
8. Cleanup the code and messages.
9. vvp can take -none for no dumper.
This patch fixes another minor problem introduced by the process
end of simulation events. Specifically if the compilation has
indicated we should not run do not even start the main event loop.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
When loading a part select from the least significant bits, it is
OK to use the %load/v instruction to strip the high bits off. This
allows the zero-based part select to work in one step, without
loading excess bits.
Some patch caused a variable that held the constant base of a part
select to become unassigned. This led to unexplained failures to part
select a signal. Fix by properly detecting the case of a constant base
of 0 for the part select.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Using the parser supplied error token to get file and line number
information appears to give incorrect results at best and core dump
at worst. This patch uses the closest real token that makes sense
to alleviate this problem.
Use the new array VPI functionality (vpiIndex, vpiParent, vpiArray)
to dynamically generate array word names. The old patch to implement
was mostly reverted.
Add the array related VPI calls. These will be used to generate
the array word name only as needed to conserve space. This patch
also makes scanmem3 from the vpi test work correctly after a
slight gold file update.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
The patch for adding support for macros with arguments contained
a leftover debugging aid. This patch corrects the code. It also
should eliminate some compilation warnings.
The functor counters were left over from the v0.8 release. Rework
the counters to be relevent to the current state of vvp.
Signed-off-by: Stephen Williams <[email protected]>
This patch modifies the preprocessor to handle text macros with
arguments. It also fixes a bug that prevented a `line directive
being issued after a multi-line text macro had been instantiated.
The second argument of $sdf_annotate is the scope that is to be
annotated. The argument is optional, and the default is to annotate
the current scope, where the $sdf_annotate is invoked.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds a -D option to iverilog-vpi and updates the manual
page to document this option and some others that were missing.
From c7347239335558b26c873ea5e64d278d1feff38a Mon Sep 17 00:00:00 2001
From: Cary R <[email protected]>
Date: Thu, 29 Nov 2007 10:31:25 -0800
Subject: [PATCH] LD should be based on $CC and not hardcoded to gcc
Fix the default loader so it will be whatever the default C
compiler is ($CC).
---
iverilog-vpi.sh | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/iverilog-vpi.sh b/iverilog-vpi.sh
index fbccedb..d2512cc 100644
--- a/iverilog-vpi.sh
+++ b/iverilog-vpi.sh
@@ -25,7 +25,7 @@ CXX=@IVCXX@
CFLAGS="@PIC@ @IVCFLAGS@ -I@INCLUDEDIR@"
# These are used for linking...
-LD=gcc
+LD=$CC
LDFLAGS32="@SHARED@ -L@LIBDIR@"
LDFLAGS64="@SHARED@ -L@LIBDIR64@"
LDFLAGS="$LDFLAGS64"
--
1.5.3.4
Handle the special case that the SDF CELL instance is empty. In this
case, the SDF file is requesting the current scope instead of an
instance within the scope.
Signed-off-by: Stephen Williams <[email protected]>
the lexor didn't allow numbers in the IDENTIFIER name,
and the parser wasn't very nice with IDENTIFIER errors.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the ability to dump array words. The words are only
dumped if they appear in a $dumpvars() statement (they are not dumped
by default). The name used for the word is <array_name>[<index>], so
you can get unexpected name conflicts.
There is also a slight increase in the memory requirements since each
array word now keeps its own name information. In the future we would
like to change this, but that is a much larger rewrite of the array
code in vvp.
This patch also needs the "Prefix escaped identifier ..." patch to
work correctly (the array word name is an escaped identifier).
Comparison operands are signed only of both operands are signed.
If one is unsigned, then they both are unsigned. This does not
affect the signedness of the comparison itself, which is unsigned.
Signed-off-by: Stephen Williams <[email protected]>
Implement extended vvp command line options to control the amount
of detail that the sdf annotator emits while parsing the source
file.
Signed-off-by: Stephen Williams <[email protected]>
Pass parsed SDF delays into the vvp run time as vpiScaledRealTime
variables, and handling the mapping of 2-values to 12-delays.
Signed-off-by: Stephen Williams <[email protected]>
The LXT and LXT2 formats ignore/work with duplicate variables in
$dumpvars() commands, but VCD output includes extra definitions that
may cause some confusion. This patch checks for duplicates and prints
a warning when they are being suppressed.
It also corrects some error messages in the LXT and LXT2 files to not
reference VCD and some other message cleanup.
The min/typ/max default warning was not being produced in all
locations a min/typ/max expression could be used. This patch
adds the default warning code to all locations. It also
modifies the manual page to explicitly state that only the
first ten warnings are printed.
GTKWave needs to have escaped identifiers properly escaped (preceded
with a back slash) in its VCD input. Without this the name may not
display correctly. Even though it is not required, to keep things
consistent LXT and LXT2 formats also prefix escaped identifiers with
a back slash.
This patch causes unnamed generate blocks to be automatically named
using the naming scheme defined in the Verilog-2005 standard. This
is a fix for the problem discussed in pr1821610.
This patch cleans up some of the crashes in the synthesis
code by incrementing the error count as appropriate. This
also removes the three false positives in the test suite
(Sorry-Ran-PASSED). A few other messages will change in
the test suite as well (blocksynth? and basiclatch).
This was causing a core dump for a number of the vpi test cases.
The problem was that they did not need the simulation time, so it
was being set to NULL. The problem was the EndOfSimulation callback
was always setting cb_data.time to the current time. A big problem
when the pointer was NULL. The solution is to only set the time
when the pointer is not NULL
During elaboration certain constants were getting extended with
the MSB. This patch makes that happen only if the constant does
not have a length. At this point most should have a length so
effectively every unsigned value is extended with 0.
For text macro substitutions the lexor did not allow leading underscores.
This patch fixes that omission. All other places that text macros may be
used appear to be correct.
Most types in Icarus support a single array dimension (reals do
not support arrays at all). If you try to use an invalid number
of dimensions the parser will now display an error message.
String values are known to be 2-value bits, so they are natural
candidates for using the movi instruction to load the value in
far fewer instructions. With this patch, up to 16bits (two bytes)
at a time can be loaded per instruction.
Signed-off-by: Stephen Williams <[email protected]>
tgt-vvp was taking strings and processing them as is, but the strings
could contain octal constants. These constants needed to be converted
to binary form before they could be turned into a bit pattern.
CMOS gates like NMOS and PMOS have a strength aware output.
They were missed when the NMOS and PMOS were fixed. "cmos.v"
will now pass in the test suite.
A previous patch I submitted to try and keep the $finish time
events missed the case of an infinite loop that did not advance
the micro time step which then prevents the debugger from
generating a finish (you can interrupt an infinite loop, but you
could not finish out of it). This patch adds a check for a
finish after each debugger call to fix this problem.
When nets are forced by non-constant expressions, the value is linked
to the destination net through a force_link. This patch adds the code
needed to unlink a force/link so that release and new force/links can
work. This fixes pr1735836.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds marks at simulation end if needed and enabled (on
and not over the limit) for vcd/lxt/lxt2 files. End of simulation
callbacks also now have the correct simulation time. The default
file names for lxt and lxt2 now match the vcd file except for the
extension. lx2 is also an alias for lxt2 and the default lxt2 file
extension is lx2. This matches what GTKWave expects. Any lxt2
diagnostic output print LXT2 instead of LXT to make it clear which
dumper you are using.
Handle arithmetic right shift during compile time. This comes
up with both the operands are constant expressions. the compiler
is able to evaluate this down to a constant to replace the
expression.
Signed-off-by: Stephen Williams <[email protected]>
Here are some more array fixes. They are mostly better error messages
instead of just asserting and some code cleanup. The one new thing
that probably should have been a separate submission is that down
indexed part select [base -: width] can now be a lvalue.
This patch fixes/enhances the array part select code. It also
verifies that any lval array index in a continuous assignment
is a constant value. Also, %set/av now uses index register 1 as
described in the documentation (as a bit offset).
@* was only expanding to input nets. nex_input() for blocks was removing
any output net that was also an input. There was also a bug in how output
nets were removed. Only outputs currently defined were removed from the
input list.
always @(*) begin
y = a;
z = y;
end
would report "a" as an input. While
always @(*) begin
z = y;
y = a;
end
would report both "a" and "y" as inputs.
To fix this all nex_inputs now take a flag that when true (the default)
correctly removes any output from the input list. Both the above cases
will now return "a". If the flag is false outputs which are also inputs
will be included in the input list. This is what the @* elaboration code
uses to get the correct sensitivity list.
Add/rework VPI access to modpaths. This allows VPI code access to
paths described in specify blocks. In the process, the VPI structure
has been reworked to conform to the IEEE1364 standard.
Signed-off-by: Stephen Williams <[email protected]>
Cleanup klunky implementation of vpi_get/put_delays for modpath
objects. Remove some useless members.
Signed-off-by: Stephen Williams <[email protected]>
Wide division/modulus (more bits than unsigned long) gave incorrect
results when both the divisor and dividend where the same. They also
did not produce an error message when dividing by zero.
This patch enhances the current fflush implementation to flush a mcd or an
individual fd. Before it always flushed everything. A compiletf routine was
also added.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
Modpaths need to be in the proper scope in order to be available to
vpi functions. The code generator manages that by writing the modpath
records with scope switch functions. Batch the modpath records at the
end of the structural stuff so that the scope switching doesn't cause
trouble.
Also seperate the modpath code into its own source file.
Signed-off-by: Stephen Williams <[email protected]>
Delay paths need a scope. This helps the code generators bind the
modpaths to the correct scope. This patch doesn't actually make use
of the information, it just makes it available to code generators.
Signed-off-by: Stephen Williams <[email protected]>
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.
Signed-off-by: Stephen Williams <[email protected]>
The << operator may not be defined when the RHS is greater than or
equal to the LHS width. To work around the problem the mask is
incrementally generated.
There have been reports in the field of number-to-real conversions
doing bad things with the calculated mantissa. This patch eliminates
a opssible portability problem by reworking the negating of negative
mantissa values.
Signed-off-by: Stephen Williams <[email protected]>
Print out a warning if extra digits are given for sized binary, octal
or hex constants. Decimal constants are very hard since we never
calculate the true number of bits the digits represent, so for now
decimal constants are not checked.
The attached patch add an implementation for $dumplimit(). It does
not do a hard limit to the file size, but for VCD files it completes
the current time step and puts a comment in the file. For lxt and
lxt2 files the functionality is in place, but because of buffering
the file can be slightly larger than expected.
Factor common code for processing signed constants to be padded.
In the process, fix some minor bugs in the padding decisions.
Signed-off-by: Stephen Williams <[email protected]>
Fixed some signed/unsigned warnings, including one that caused an
actual runtime error if not dealt with safely.
Signed-off-by: Stephen Williams <[email protected]>
The argument to $unsigned is self-determined no matter what the
context the $unsigned itself is in. This is important only where
the result can be negative but the result width is context-determined.
Do ocntext fitting manually to prevent the context fitting it and
affecting the expression argument.
Signed-off-by: Stephen Williams <[email protected]>
This patch implements the System Verilog $urandom() and $urandom_range()
functions. There are no check to verify that $urandom_range is only given
unsigned arguments. If you give it a negative value the bit pattern will
be interpreted as a unsigned number.
Fix the handling of expressions that have unsized integers and are
in self determined context. Unsized integers are generally assumed
to have at least 32bits.
Signed-off-by: Stephen Williams <[email protected]>
Constant propagation incorrectly elided an entire constant net node
if only the LSB of the driven vector was HiZ. This caused the entire
vector to look like HiZ. Also, the code generator for writing the
constant values missed bits.
Signed-off-by: Stephen Williams <[email protected]>
signed compare in proceedural code was comparing the absolute
value if both operands were negative. Wrong!
Signed-off-by: Stephen Williams <[email protected]>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the ability to call command files from other command
files. There is currently a limit of 16 total levels deep (15 stored
plus the current file). -f is now an alias for -c for both the command
line and command files. The parser also reports errors when they occur
along with the file name and line number to aid in debugging problems.
In expressions, user defined functions have a clearly defined
width and the test_width expression needs to express that. Note
that the $signed/$unsigned functions are special and magical.
Signed-off-by: Stephen Williams <[email protected]>
Variable word addresses are not to be adjusted by the bit select
of the vector direction. That is a holdover from when arrays were
stored as bit vectors.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds ivl_scope_time_precision() to the compiler which can
be used to extract the local scope precision. tgt-stub and tgt-vvp
have been modified to use this new function and output a value that
is appropriate. The vvp runtime has been altered to use this new
data which is accessed with the vpip_time_precision_from_handle()
function. vpiTimePrecision uses this function to return the correct
precision.
The outputs to bufif and nmos/pmos devices are always strength-aware,
so should have their outputs connected to a net8 device.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds min_typ_max to expressions. Remember when using a
min_typ_max triplet in an expression they must be enclosed with
parenthesis (1364-2001 section 4.3 page 58).
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.
- GSoC 2007
It is legal in Verilog to bind expressions to ports that do not
match the port width. Icarus Verilog needs to create the necessary
part selects to get the connections right.
Signed-off-by: Stephen Williams <[email protected]>
Add code to handle all the primitives currently defined and
fixed a power of ten error in the time units display (it is
either 10^{units} or 1e{units}, but not 10e{units}).
This patch adds functionality to verify that primitives are given
an appropriate number of ports. For multiple output gates (but,
not, pulldown, pullup) it also reports that Icarus currently does
not support multiple outputs when more than one is given.
When a repeat concatenation expression is translated to a netlist,
get the repeat expression right. This comes up when an elab_and_eval
elaboration contains a repeat concationation, and the expression is
ultimately turned into a netlist by expr_synth.
Signed-off-by: Stephen Williams <[email protected]>
Signed divide of 32bit values can overflow if done in a 32bit long
due to the truncation of sign bits. So use the large value algorithm
if the values are >= 31 bits (63 bits on 64bit machines).
Signed-off-by: Stephen Williams <[email protected]>
This patch adds checks to verify that functions do not invoke
statements that are invalid for them (#, @, wait, enable/call
tasks and non blocking assignment). For reference see section
10.3.4 of 1364-2001.
C style comments were not recognized as comments in false or
suppressed sections of ifdef/etc. blocks. This prohibited an
unneeded endif/else/etc. from being commented out with this
style of comment.
I decided not to delete these since we may at some point in time want
this functionality back. For now they are commented out with an
explanation so we know what is going on.
This patch splits the end of compile and the start of simulation call
backs code into two different procedures. The end of compile events are
still executed at the same time they alway were. The start of simulation
events are now run after initialization.
The event loop used to check for $finish at every iteration. This patch
alters this behavior to only check just before you advance to the next
time step. This allows events for the current time step to complete.
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Previously list of port declarations were considered a complete
definition of the port. This caused problems for some, so this patch
allows implicitly defined ports (no wire/reg/etc.) to have net
declarations in the body.
This would have never been a problem with the actual circuit generated.
The problem was that the assert was checking values that had never been
set. The constructor now explicitly sets these values to zero and while
I was at it I added a couple more asserts.
This patch is rather large and fixes a couple of problems. The major
change is that instead of keeping all the range specifications in
a list that is later processed the information is now kept as
individual entries for the port and net definitions. This allows
easier checking for multiple definitions (pr1660028), more
detailed error messages and the ability to pass the now deprecated
style of a scalar I/O definition used with a vectored net definition.
These changes did require extra code to prevent a single definition
from setting the range values in more than on place.
When using the new ANSI-C style of port declarations (1364-2001 12.3.4
list_of_port_declarations) the compiler ensures that you do not
redeclare the port in the body (it is already completely defined).
This caught a few errors in the test suite (pr859 and sqrt32*).
The flag to disable the normal port checking and allow the deprecated
port syntax is -gno-io-range-error. This will print a warning for the
case of a scalar port with a vectored definition in the body. All
other cases are still considered an error.
This patch adds better checking for a missing endmodule or an attempt
to nest modules. A more descriptive message is printed and the location
of the original module definition is printed.
It is possible for the compiler to generate logic gates that have
inputs from part select nodes. This implements the part select
input methods.
Signed-off-by: Stephen Williams <[email protected]>
This patch fixes an incorrect optimization that was skipping a
call to set the port width when there was no width (a scalar).
The problem with this is that since a (0,0) pair was not added
to the list, later when the width was define to (1,0) the checking
code did not have the (0,0) to tell that there was a mismatch in
the port size. Section 12.3.3 States that the two sizes shall be
identical, so yes this is an error even though it is very minor.
This patch makes vpiFullName for real variables return the correct
value. A Scope reference was added to the base structure along with
the relevant code to support generating the full name. A couple of
memory leaks were plugged and some formatting fixed as well.
It appears that other simulators allow the second argument to
vpi_handle_by_name to be either a scope or a module. Allowing
a module in addition to a scope significantly increases the
usability of this function.
vpi_get_str() can now return a reasonable value for most of the
types used in vvp. I'm not certain I got all of them, but they
are easy to add if any are missing. I also fixed a couple of
typos that I found while looking for all the different types.
Real value constants have width 1 in Icarus Verilog. This is not
the same as the output from $bitstoreal, which is *not* a real
valued expression but a logic vector that losslessly carries the
real value.
Also remove unused CVS markings.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds the missing vpiFullName property to binary and
string parameters (FYI real parameters are not currently supported
by the VPI interface).
This patch implements the swrite* and sformat system tasks. It also
makes $simtime distinguishable from the other integer time tasks.
This was needed to get the correct time units when $simtime was given
as an argument to $swrite*. The string constant code was also modified
to allow a string to be returned as a vector (0/1 bit pattern).
Here are some more specifics about the swrite* changes.
1. They do not share formatting code with the other display functions,
so they may/will produce different results.
2. All %{alpha} codes allow a width and justification. Others have been
enhanced (%t allows the default width and precision to be overridden,
time functions print with time formatting, better error checking and
messages, etc.).
3. %u and %z formatting codes have been added. It is important to note
that these two formats can produce embedded NULLs, since these
functions are returning a string anything after the first NULL will
not be reachable! memcpy is used instead of regular string processing
where needed so that the original string will contain the total
result. The size returned when the string is created is the true
length. A warning will be printed if a string with embedded NULLs is
produced (strlen() does not match the true length).
4. Real numbers are printed with %g instead of %f.
Once this new formatting code has been evaluated we should incorporate
the changes/fixes into the formatting code for the other functions or
the other functions could be modified to use this new code. The true
string length is available so we should be able to work around the
embedded NULL problem.
The calculated return value for the calculated strength value of
a net was left dangling. This patch fixes that. See pr1770199 in
the regression test suite.
Signed-off-by: Stephen Williams <[email protected]>
distinguish between self-determined and value-preserving when
evaluating constants that are arguments to concatenations.
Signed-off-by: Stephen Williams <[email protected]>
Support initialization assignments of real value variables. In the
process, clean up the processing of real variable declarations in
the parser.
Signed-off-by: Stephen Williams <[email protected]>
The standard states that the seed for the random functions should be
an integer/time variable or a register. This patch fixes the compiletf
routines to check for this. There is also a small patch to
vvp/vpi_signal.cc that removes an assert that was failing and replaces
it with appropriate code. The assert was verifying that the source was
not bigger than an integer. The problem with this is that a time
variable or register may be bigger than an integer. I altered the code
to remove the assert and copy only the lower (8 * sizeof integer) bits.
The potential overflow/loss of precision is not checked. This passes
the regression tests.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <[email protected]>
This patch adds a compiletf routine to the $deposit system task and
simplifies the calltf routine. It also patches the constant string code
to return an appropriate integer value when needed. A number of compiletf
routines that check for this can now be simplified since this (string
constants) no longer causes an assert in an integer environment.
Better handle cases where the scope part of a heirarchical name does
not match any existing scope, or where scope index expressions are
not correct.
Signed-off-by: Stephen Williams <[email protected]>
In rare cases, the reduction logic nodes may get vector part inputs.
This patch adds support for vector parts entering a reduction node.
Signed-off-by: Stephen Williams <[email protected]>
This fixes r-value type references to memory words for memories
that have a non-zero base address. Elaborate the expression
needed to get the canonical word index.
The port input count assertion was triggering incorrectly. It was
comparing the count with the bytes instead of bits in a word.
Signed-off-by: Stephen Williams <[email protected]>
The argument passed to $finish and $stop is not currently used, but it
is now passed down to the functions that may someday do something
useful with it (schedule_finish() and schedule_stop() in vvp/schedule.cc).
Add the missing probabilistic functions and add compiletf routines
for all the functions. The original calltf routines have been
modified as appropriate. The base functions are straight copies
from the standard. I have visually verified the curves with 5,000
points and they look correct.
Even though vpiFinish does not currently do anything with it's
argument I thought it would be best to have them all be in the
correct range [0, 1, 2], so they have been updated as appropriate.
Handle real valued expressions in vector declarations. Also clean
up the handling of vector declaration expressions.
Signed-off-by: Stephen Williams <[email protected]>
Nil parameter overrides can turn up in positional paramter override
lists, where items are intentionally skipped.
Signed-off-by: Stephen Williams <[email protected]>
Be careful to include bitwise differences in double values, because
it is the bit pattern we are passing aroung, not the arithmetic value.
Signed-off-by: Stephen Williams <[email protected]>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <[email protected]>
Make varable drivers (reg vectors and real) propagate their initial
values using a special init scheduler queue. This causes the net to
be loaded with reasonable initial values.
Signed-off-by: Stephen Williams <[email protected]>
Non-constant indexed part select in continuous assignment generates
a select node with the correct width. In the process factor out and
share some of the part select calculations with expr part select
handling methods.
Signed-off-by: Stephen Williams <[email protected]>
Words of net arrays were incorrectly added to the scope. They should
only be attached to the array, and accessed as a word of the array.
Signed-off-by: Stephen Williams <[email protected]>
Real value are vector width of 1, fix real literal to reflect this.
fix leaking real registers in code generation for function arguments.
Load of signal should handle conversion from real to vector. Function
arguments, type vector passed a real value, are an example where this
comes up.
Signed-off-by: Stephen Williams <[email protected]>
Backslash-escapes are processed early, during elaboration, so that
escaped characters show up in all places with the calculated value.
This means the $display formatting will get processed strings and
should not process back-slashes again.
Signed-off-by: Stephen Williams <[email protected]>
Parameter expressions that do not otherwise have a size should
evaluate expressions losslessly, expanding as necessary to prevent
overflow of data.
Signed-off-by: Stephen Williams <[email protected]>
Arrays of nets that have all their words collapsed together can become
a collapsed array as a whole. Add support for this case in the vvp code
generator and runtime.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
Stephen Williams
Nick Gasson
Cary R
Larry Doolittle
Martin Whitaker
Martin Whitaker
Jared Casper
Martin Whitaker
Martin Whitaker
Holger Wächtler
nog
Stephen Williams
GuntherDannoritzer
thiede
J Varshney
Michael
Michael Witten
Gyorgy Jeney
Martic Whitaker
yang yun ju