Instead of using the number of processors in the host, use the number of
processors available to the process, respecting cpu affinity
assignments. Without pthreads, fall back and use the number of
processors in the host as before.
This is now applied everywhere so runing `nuamctl -C 0-3 verilator` or
`numactl -C 0-3 Vsim` should behave as if the host has 4 cores (e.g.
like in CI jobs)
Used to fail with "can't use --exe with --lib-create", and we didn't
have any tests for it before. (The equivalent --main --exe --build
--timing works)
Accessing the ports of hier_block instances directly under the current
hier_block (or top level) work just fine (the heir stub .sv has them),
and this can simplify hooking up dotted references into hier blocks:
push part of the reference under the hier block into the hier block, and
wire it to a port, then resolve the rest of the reference to the port of
the instance.
Internals: Refactor AstNodeBlock representation (#6280)
AstNodeBlock now has 2 child lists: 'declsp' to hold declarations within
the block, and 'stmtsp' to hold the procedural statements.
AstBegin is then just a simple subtype of AstNodeBlock.
AstFork is a proper superset of AstNodeBlock (and also AstBegin), and
adds 'forksp' which hold the parallel statements. Having the sequential
'stmtsp' in AstFork is required to properly implement variable
initializers in fork blocks (IEEE 1800-2023 9.3.2), this makes that
clear, while also separating the non AstNodeStmt declarations
(for #6280). The actual fork branches in 'AstFork::forkps()' are all
AstBegin nodes. This is required as lowering stages will introduce
additional statements in each parallel branch. (We used to wrap AstFork
statements into AstBegin in 3 different places, now they always are
AstBegin and this is enforced via the type checker/V3Broken).
Also fixes incorrect disabling of forked processes from within the `fork`.
- Delete 'finalsp'. It was used in one place, basically unnecessary and
safe to remove.
- Make 'argsp' a 'List[AstVar]'. This held before. It holds the function
argument and return variables.
- Replace 'intitsp' with 'varsp' and make it into 'List[AstVar]' to hold
the function local variables. This was most of its use before. The few
places we inserted statements here now moved into 'stmtsp' by
inserting at the front of the list.
Remove the large variety of ways raw "text" is represented in the Ast.
Particularly, the only thing that represents a string to be emitted in
the output is AstText.
There are 5 AstNodes that can contain AstText, and V3Emit will throw an
error if an AstText is encountered anywhere else:
- AstCStmt: Internally generated procedural statements involving raw
text.
- AstCStmtUser: This is the old AstUCStmt, renamed so it sorts next to
AstCStmt, as it's largely equivalent. We should never create this
internally unless used to represent user input. It is used for $c,
statements in the input, and for some 'systemc_* blocks.
- AstCExpr: Internally generaged expression involving raw text.
- AstCExprUser: This is the old AstUCFunc, renamed so it sorts next to
AstCExpr. It is largely equivalent, but also has more optimizations
disabled. This should never be created internally, it is only used for
$c expressions in the input.
- AstTextBlock: Use by V3ProtectLib only, to generate the hierarchical
wrappers.
Text "tracking" for indentation is always on for AstCStmt, AstCExpr, and
AstTextBlock, as these are always generated by us, and should always be
well formed.
Tracking is always off for AstCStmtUser and AstCExprUser, as these
contain arbitrary user input that might not be safe to parse for
indentation.
Remove subsequently redundant AstNodeSimpleText and AstNodeText types.
This patch also fixes incorrect indentation in emitted waveform tracing
functions, and makes the output more readable for hier block SV stubs.
With that, all raw text nodes are handled as a proper AstNodeStmt or
AstNodeExpr as required for #6280.
Initial idea was to remodel AssignW as Assign under Alway. Trying that
uncovered some issues, the most difficult of them was that a delay
attached to a continuous assignment behaves differently from a delay
attached to a blocking assignment statement, so we need to keep the
knowledge of which flavour an assignment was until V3Timing.
So instead of removing AstAssignW, we always wrap it in an AstAlways,
with a special `keyword()` type. This makes it into a proper procedural
statement, which is almost equivalent to AstAssign, except for the case
when they contain a delay. We still gain the benefits of #6280 and can
simplify some code. Every AstNodeStmt should now be under an
AstNodeProcedure - which we should rename to AstProcess, or an
AstNodeFTask). As a result, V3Table can now handle AssignW for free.
Also uncovered and fixed a bug in handling intra-assignment delays if
a function is present on the RHS of an AssignW.
There is more work to be done towards #6280, and potentially simplifying
AssignW handing, but this is the minimal change required to tick it off
the TODO list for #6280.
I stared this because the emitted makefiles for hierarchical verilation
were non-deterministic (iterating unordered_map indexed by pointers).
Then I realized that the V3HierPlan is just a dependency graph encoded
in a slightly idiosyncratic way. We do have a data structure to use for
that instead.
With that the output should always be deterministic + have nicer dumps.
This patch implements #6480. All loop statements are represented using
AstLoop and AstLoopTest.
This necessitates rework of the loop unroller to handle loops of
arbitrary form. To enable this, I have split the old unroller used for
'generate for' statements and moved it into V3Param, and subsequently
rewrote V3Unroll to handle the new representation. V3Unroll can now
unroll more complex loops, including with loop conditions containing
multiple variable references or inlined functions.
Handling the more generic code also requires some restrictions. If a
loop contains any of the following, it cannot be unrolled:
- A timing control that might suspend the loop
- A non-inlined call to a non-pure function
These constructs can change the values of variables in the loop, so are
generally not safe to unroll if they are present. (We could still unroll
if all the variables needed for unrolling are automatic, however we
don't do that right now.)
These restrictions seem ok in the benchmark suite, where the new
unroller can generally unroll many more loops than before.
Internals: Refactor generate construct Ast handling (#6280)
We introduce AstNodeGen, the common base class of AstGenBlock,
AstGenCase, AstGenFor, and AstGenIf, which together represent all SV
generate constructs. Subsequently remove AstNodeFor, AstNodeCase
(AstCase is now directly derived from AstNodeStmt) and adjust internals
to work on the new representation.
Output is identical modulo hashes do to changed AstNode type ids, no
functional change intended.
Step towards #6280.
Rename AstAssignAlias to AstAlias and make it derive from AstNode
instead of AstNodeStmt.
Replace AstAlias with AstAssignW in V3LinkDot::linkDotScope, which is
the last place we need to be aware of the alias construct. Using
AstAssignW dowstream enables further optimization while preserving the
same functionality.
The only use for the clocker attribute and the AstVar::isUsedClock that
is actually necessary today for correctness is to mark top level inputs
of --lib-create blocks as being (or driving) a clock signal. Correctness
of --lib-create (and hence hierarchical blocks) actually used to depend
on having the right optimizations eliminate intermediate clocks (e.g.:
V3Gate), when the top level port was not used directly in a sensitivity
list, or marking top level signals manually via --clk or the clocker
attribute. However V3Sched::partition already needs to trace through the
logic to figure out what signals might drive a sensitivity list, so it
can very easily mark all top level inputs as such.
In this patch we remove the AstVar::attrClocker and AstVar::isUsedClock
attributes, and replace them with AstVar::isPrimaryClock, automatically
set by V3Sched::partition. This eliminates all need for manual
annotation so we are deprecating the --clk/--no-clk options and the
clocker/no_clocker attributes.
This also eliminates the opportunity for any further mis-optimization
similar to #6453.
Regarding the other uses of the removed AstVar attributes:
- As of 5.000, initial edges are triggered via a separate mechanism
applied in V3Sched, so the use in V3EmitCFunc.cpp is redundant
- Also as of 5.000, we can handle arbitrary sensitivity expressions, so
the restriction on eliminating clock signals in V3Gate is unnecessary
- Since the recent change when Dfg is applied after V3Scope, it does
perform the equivalent of GateClkDecomp, so we can delete that pass.
These are no longer required for correct scheduling. They are still
accepted for backward compatibility, but have no effect on simulation
and are dropped in the front-end. Also removed the then redundant
AstAlwaysPublic class.
Fixes#6442
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
Signed-off-by: Artur Bieniek <abieniek@internships.antmicro.com>
Co-authored-by: Krzysztof Bieganski <kbieganski@antmicro.com>
Combined Dfg variable elimination into the regularization pass that runs
before converting back to Ast. This avoids introducing some unnecessary
temporaries.
Added replacing of variables with constants in the Ast if after the
Dfg passes they are known to be constants. This is only done in final
scoped Dfg application.
Avoid introducing temporaries for common sub-expressions that are
cheaper to re-compute than store in a temporary variable.
Enable removal of redundant unpacked array variables.
Also fixes#6394 as this patch involved changes to that code.
These are all genuine bugs, brief descriptions.
1. V3OrderCFuncEmitter.h used to delete a node early that was still
reference in a graph dump later. Not a big deal, it can be deleted
later at the end of V3Order.
2. V3Param.cpp: this one is tricky. The variable referenced by
AstVarXRef was deleted at the end of `visit(AstGenCase*)`, but then
`visit(AstVarXRef*)` checks `nodep->varp()` (already deleted) to see
if it's in an interface.
3. V3String::wildMatch is sometimes called with an empty 's' (the string
we are matching against tha pattern 'p'), in which case it used to go
off into the woods. Added check on call. An arbitrary number of `*`
will still match the empty string.
4. V3Task.cpp: There was an error reported for an unsupported construct,
then a subsequent SEGV. Just signal the error upward so we bail on an
error in a more graceful way.
5. verylog.y: Some unsupported constructs failed to set the parsed node,
so some memory thrash made it into some code downstream. Just parse
these into nullptr.
Also increased the timeout on one test, which sometimes tripped with
asan on GCC during heavy host load.
Added a mini type system for Dfg using DfgDataType to replace Dfg's use
of AstNodeDType. This is much more restricted and represents only the
types Dfg can handle in a canonical form. This will be needed when
adding more support for unpacked arrays and maybe unpacked structs one
day.
Also added an internal type checker for DfgGraphs which encodes all the
assumptions the code makes about type relationships in the graph. Run
this in a few places with --debug-check. Fix resulting fallout.
Reduce set of synthesized logic to be more in-line with what Dfg used to
handle before + drivers of circular variables. This was always the
intention but the previous algorithm was both a bit too eager, and also
missed some circular variables. We can add back more heuristics based on
performance measurements for non-circular logic later.
Large scale refactoring to simplify some of the more obtuse internals of
DFG. Remove multiple redundant internal APIs, simplify representation of
variables, fix potential unsoundness in circular decomposition. No
functional change intended.
* Fix broken support of unassigned virtual interfaces
Unassigned virtual interface support added by #6245 is broken - PR marks
dead module as alive - we can't do that as once a module is dead it
needs to remain dead because earlier steps (e.g. port resolution) have
already been skipped.
This commit handles unassigned virtual interfaces at the beginning of
first pass of LinkDot (so it is never marked as dead, and no linking
steps are getting skipped).
Fixes#6253.
* Apply suggestions from code review
Co-authored-by: Wilson Snyder <wsnyder@wsnyder.org>
* Apply 'make format'
* Revert add of redundant iterateChildren() call
* Add original test case
---------
Co-authored-by: Wilson Snyder <wsnyder@wsnyder.org>
Co-authored-by: github action <action@example.com>
The previous algorithm was designed to handle the general case where a
full control flow path predicate is required to select which value to
use when synthesizing control flow join point in an always block.
Here we add a better algorithm that tries to use the predicate of
the closest dominating branch if the branch paths dominate the joining
paths. This is almost universally true in synthesizable logic (RTLMeter
has no exceptions), however there are cases where this is not
applicable, for which we fall back on the previous generic algorithm.
Overall this significantly simplifies the synthesized Dfg graphs and
enables further optimization.
* Skip profiling tests on non-glibc platforms
* Enforce dumb terminal in tests
* Include POSIX headers whenever __unix__ macro is defined
* Treat no procfs as normal condition
* Respect MAKE variable when running make
There were a couple corner case bugs in V3Inline, and one in Dfg when
dealing with inlining of modules/variables.
V3Inline:
- Invalid code generated when inlining an input that also had an
assignment to it (Throws an ASSIGNIN, but this is sometimes reasonable
to do, e.g. hiererchical reference to an unonnected input port)
- Inlining (aliasing) publicly writeable input port.
- Inlining forcable port connected to constant.
Dfg:
- Inining publicly writeable variables
The tests that cover these are the same and fixing one will trigger the
other bug, so fixing them all in one go. Also cleanup V3Inline to be less
out of order and rely less on unique APIs only used by V3Inine (will
remove those in follow up patch).
Small step towards #6280.
This patch adds DfgLogic, which is a vertex that represents a whole,
arbitrarily complex combinational AstAlways or AstAssignW in the
DfgGraph.
Implementing this requires computing the variables live at entry to the
AstAlways (variables read by the block), so there is a new
ControlFlowGraph data structure and a classical data-flow analysis based
live variable analysis to do that at the variable level (as opposed to
bit/element level).
The actual CFG construction and live variable analysis is best effort,
and might fail for currently unhandled constructs or data types. This
can be extended later.
V3DfgAstToDfg is changed to convert the Ast into an initial DfgGraph
containing only DfgLogic, DfgVertexSplice and DfgVertexVar vertices.
The DfgLogic are then subsequently synthesized into primitive operations
by the new V3DfgSynthesize pass, which is a combination of the old
V3DfgAstToDfg conversion and new code to handle AstAlways blocks with
complex flow control.
V3DfgSynthesize by default will synthesize roughly the same constructs
as V3DfgAstToDfg used to handle before, plus any logic that is part of a
combinational cycle within the DfgGraph. This enables breaking up these
cycles, for which there are extensions to V3DfgBreakCycles in this patch
as well. V3DfgSynthesize will then delete all non synthesized or non
synthesizable DfgLogic vertices and the rest of the Dfg pipeline is
identical, with minor changes to adjust for the changed representation.
Because with this change we can now eliminate many more UNOPTFLAT, DFG
has been disabled in all the tests that specifically target testing the
scheduling and reporting of circular combinational logic.
NBAs targeting a variable in a different scope are now allocated
temporary variables for captured values in the scope of the NBA, not the
scope of the target variable.
Fixes#6286
When we had a `{a, b} = ...`, and the DFG conversion of `a = ...`
succeeded, but `b = ...` failed, we still used to include `a = ...` in
the DFG, which then caused a spurious multi-driver error for `a` on
a subsequent DFG pass, as the original `{a, b} = ...` was still present
in the Ast, but we also had the extra `a = ...` from converting out of
DFG on the previous pass.
In this patch we only convert assignments with a concatenation on the
LHS, if all target LValues can be converted into DFG.
This is the proper fix for #4231
Remove AstJumpLabel
AstJumpGo now references one if its enclosing AstJumpBlocks, and
branches straight after the referenced block.
That is:
```
JumpBlock a {
...
JumpGo(a);
...
}
// <--- the JumpGo(a) goes here
```
This is sufficient for all use cases and makes control flow much easier to
reason about. As a result, V3Const can optimize a bit more aggressively.
Second half of, and fixes#6216
Added test for a particularly convoluted case requiring fixup in
V3Premit. To help with statistics stability, also prevent V3Premit from
introducing temporaries for assignment where the RHS reads the LHS, but
the assignment is known to be atomic (by emitted C++ semantics).
Also rename `createWideTemp` to `createTemp`, as it is used for non-wide
expressions as well.
Previously DFG was limited to having a Sel, or an ArraySel potentially
under a Concat on the LHS of combinational assignments. Other forms or
combinations were not representable in the graph.
This adds support for arbitrary combinations of the above by
combining DfgSplicePacked and DfgSpliceArray vertices introduced in
#6176. In particular, Sel(ArraySel(VarRef,_),_) enables a lot more code
to be represented in DFG.
Wilson Snyder
Geza Lore
Todd Strader
Igor Zaworski
Christian Hecken
Ryszard Rozak
Matt Stroud
Bartłomiej Chmiel
Aleksander Kiryk
Artur Bieniek
Szymon Gizler
Krzysztof Bieganski
Jakub Wasilewski
Aleksander Kiryk
Mateusz Gancarz
github action
Michael Bedford Taylor
Rodrigo Batista de Moraes
Paul Swirhun
Paul Swirhun
George Polack
Yilou Wang
Danny Oler
Max Wipfli
Ibrahim Burak Yorulmaz