luke
/
OpenRAM
mirror of https://github.com/VLSIDA/OpenRAM.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
2,464 Commits 4 Branches 63 Tags 78 MiB
Commit Graph

2114 Commits

Author SHA1 Message Date
mrg 1d5e5e3607 Don't run lvs/drc or route supplies in verilog test 2020-04-02 12:42:28 -07:00
mrg 67de7efd49 Fix syntax error. No DRC/LVS in netlist only mode. 2020-04-02 11:31:28 -07:00
mrg 9106e22b58 Fix typo and syntax error. 2020-04-02 10:37:21 -07:00
mrg 5349323acd PEP8 cleanup. DRC/LVS returns errors. 2020-04-02 09:47:39 -07:00
mrg 0d6c84036d Adjust fudge factor for pin spacing. 2020-04-02 09:47:13 -07:00
mrg a3683c5898 Separate pbitcell from hierarchical decoder 2020-04-01 16:39:47 -07:00
mrg a9d3548be1 Refactor drc/lvs error output 2020-04-01 15:54:06 -07:00
Jesse Cirimelli-Low cdf0315a90 Merge branch 'dev' into custom_mod 2020-04-01 15:35:33 -07:00
mrg 3b662026d2 pnand3 constant hack for input separation 2020-04-01 11:36:04 -07:00
mrg 7956b63d9f Add licon option to precharge 2020-04-01 11:26:45 -07:00
mrg 3e41664db6 Split precharge array to multiport and normal cell 2020-04-01 11:26:31 -07:00
mrg 3074cf3b86 Small format cleanup 2020-04-01 11:15:29 -07:00
mrg da334e47aa Separate pbitcell tests for precharge 2020-04-01 11:14:50 -07:00
mrg bc9cbe70a7 Poly overlap doesn't convert to tx device 2020-04-01 09:42:07 -07:00
Jesse Cirimelli-Low 6e2a5d7a1a set sram output cap in characterizer to be 4x dff input cap 2020-04-01 04:24:43 -07:00
mrg d916322b74 PEP8 updates 2020-03-31 10:15:46 -07:00
Joey Kunzler b0d2946c80 update to sense amp and write driver modules 2020-03-30 20:00:32 -07:00
mrg 9907daaffa Min area only for multiple layers 2020-03-26 13:05:02 -07:00
mrg d2c97d75a7 Add well contact and min area to power pin of precharge 2020-03-26 11:49:32 -07:00
mrg 1e3734cb26 Hack to fix pnand3 in freepdk45 2020-03-26 11:08:53 -07:00
Jesse Cirimelli-Low 341bde7a48 Merge branch 'dev' into custom_mod 2020-03-26 02:40:37 -07:00
mrg 2f353187ba Skywater extraction mode for si unit scales 2020-03-24 12:41:15 -07:00
mrg 1e2163c3a6 Hack for pnand3 pin spacing 2020-03-24 12:40:41 -07:00
mrg e9d0db44fd Add li_stack contact to ptx and pgate if it exists. 2020-03-23 16:55:38 -07:00
mrg f491876a5a Move up B input in pnor2 2020-03-23 13:49:08 -07:00
mrg c15b4167b6 Merge branch 'dev' into tech_migration 2020-03-23 11:57:03 -07:00
mrg f598a359d5 Remove unused contact in pnor2 2020-03-23 11:55:17 -07:00
mrg 717cbb0fe5 Remove unused contact in pnand3 2020-03-23 11:52:19 -07:00
mrg 0ee6963198 Remove unused contact in pnand2 2020-03-23 11:46:21 -07:00
mrg f21791a904 Add source drain contact options to ptx. 2020-03-23 11:36:45 -07:00
mrg 9df99beb28 Merge branch 'tech_migration' into dev 2020-03-06 15:03:46 -08:00
mrg fd7af7fc25 Matt sucks skip test 2020-03-06 15:03:31 -08:00
mrg c5a1be703c Rotate via and PEP8 formatting 2020-03-06 13:39:46 -08:00
mrg 23501c7b35 Convert pnand+pinv to pand in decoders. 2020-03-06 13:26:40 -08:00
mrg 1a2efd77ad Move rbl route away from bitcell array 2020-03-06 09:48:20 -08:00
mrg ee18f61cbf Route RBL to edge of bank. 2020-03-06 09:03:52 -08:00
mrg 05f9e809b4 PEP8 Formatting 2020-03-05 16:27:35 -08:00
mrg 6506622dfb PEP8 Formatting 2020-03-05 16:20:21 -08:00
mrg 5b23653369 PEP8 Formatting 2020-03-05 16:13:49 -08:00
mrg ad98137cd4 Merge branch 'dev' into tech_migration 2020-03-05 14:18:06 -08:00
mrg 5312629702 Remove jog in precharge. Jog is in port data 2020-03-05 12:10:13 -08:00
mrg 9c1f0657dd PEP8 Formatting 2020-03-05 11:58:36 -08:00
mrg 7adeef6c9e PEP8 Formatting 2020-03-05 10:21:18 -08:00
mrg 287a31f598 Precharge updates. 
Enable different layers for bitlines.
Jog bitlines to fit precharge transistors for close proximity bitlines.
PEP8 cleanup.
 2020-03-04 17:39:11 -08:00
Joey Kunzler d7529ce526 Vdd/gnd via stacks now use perferred directions, added cell property to override 2020-03-04 17:05:19 -08:00
mrg 7ba9e09e12 Incomplete precharge layer decoupling 2020-03-04 22:23:05 +00:00
Jesse Cirimelli-Low f62016ad9f revert dff_buf for no body contact 2020-03-03 12:40:08 +00:00
mrg bb2305d56a PEP8 format fixes 2020-02-28 18:24:39 +00:00
mrg e1b97f58e1 Add instance center location 2020-02-28 18:24:09 +00:00
mrg 0b73979388 Space inputs by M1 pitch 2020-02-28 18:23:49 +00:00
mrg 073bd47b31 Add source/drain/gate to structure 2020-02-28 18:23:36 +00:00
Matt Guthaus 1617840ed3 Merge branch 'dev' of github.com:VLSIDA/PrivateRAM into dev 2020-02-27 08:50:19 -08:00
mrg 266d68c395 Generalize pgate width based on nwell/pwell contacts 2020-02-25 17:09:07 +00:00
Matt Guthaus 0db0c5a3a9 Update version to 1.1.4 2020-02-25 08:09:08 -08:00
mrg e80677caf7 Merge remote-tracking branch 'origin/dev' into tech_migration 2020-02-25 00:36:43 +00:00
mrg 254e584e35 Cleanup and simplify ptx for multiple technologies 2020-02-25 00:36:22 +00:00
mrg 585a708e0c Generalize y offsets in pnand3 2020-02-25 00:36:02 +00:00
mrg d565c9ac72 Generalize input y offsets 2020-02-25 00:35:32 +00:00
mrg 6bcffb8efb Change default cell height and fix contact width error 2020-02-25 00:34:59 +00:00
mrg 35110a4453 Improve debug of non-manhattan error 2020-02-25 00:34:28 +00:00
Joey Kunzler 4c9b3c5864 Merge branch 's8_update' into dev 
Add lpp to addText(), remove reference to specific technology in gdsMill
 2020-02-24 14:02:18 -08:00
Bastian Koppelmann 0e641bf905 Remove write_driver_array.py.orig 
this was the remainder of applying a diff using "patch". To avoid this
mistake, add the filetypes created by "patch" to the .gitignore.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-21 13:29:43 +01:00
Joey Kunzler c9cb387912 fixed variable typo 2020-02-20 18:35:54 -08:00
Matt Guthaus da4c69ab98 Merge branch 'pin-pull3' into dev 2020-02-20 09:07:58 -08:00
Hunter Nichols c1cb6bf512 Changed layout input names of s_en AND gate to match the schematic 2020-02-19 23:32:11 -08:00
Joey Kunzler d6987ac584 added purposes to addText(), removed reference to specific tech from gdsMill 2020-02-19 16:26:52 -08:00
Hunter Nichols df2f981a34 Adds checks to prevent characterization of redundant corners. 2020-02-19 15:59:26 -08:00
Hunter Nichols e4fef73e3f Fixed issues with bitcell measurements variable names, made target write ports required during characterization 2020-02-19 15:34:31 -08:00
Hunter Nichols 843fce41d7 Fixed issues with sen control logic for read ports. 2020-02-19 03:06:11 -08:00
Bastian Koppelmann 76256a2f1b sense_amp: Allow custom pin names 
we don't want to propagate the sense amp's bl/br names out of the
sense_amp_array. Thus the sense_amp_array gets them named as
"bl"/"br" again.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 15:20:12 +01:00
Bastian Koppelmann 680dc6d2c7 sense_amp/array: Remove hardcoded pin names 
all pin names should be wrapped into a function/property. This ensures
that there is exactly one place to change the name.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 15:20:06 +01:00
Bastian Koppelmann 9a12b68680 write_driver: Allow custom pin names 
we don't want to propagate the write driver bl/br names out of the
write_driver_array. Thus the write_driver_array gets them named as
"bl"/"br" again.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:25:00 +01:00
Bastian Koppelmann c06cb2bfc2 write_driver/array: Remove hardcoded pin names 
all pin names should be wrapped into a function/property. This ensures
that there is exactly one place to change the name.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:23:26 +01:00
Bastian Koppelmann 656fdd1008 port_data: Refactor channel_route/connect_bitlines() 
both functions share a lot of code and are passing around a lot of data
under similar names (inst1, inst1_start_bit, inst1_bl_name, ...). Thus
we group all these elements in a named tuple to ease passing around
these elements.

All callers of channel_route/connect_bitlines() either pass in the bl/br
names or rely on "br_{}"/"bl_{}" as defaults. These hard coded values
should be determined by the instances. Thus we get the bitline names
based on the instances passed in. The callers only provide a template
string, to take care of the case that bitlines are called "bl_out_{}".

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:20:03 +01:00
Bastian Koppelmann 5e1f64c8f9 modules/port_data: Add get_bl/br_name method 
if we rely on the names of the submodules (sense_amp_array,
write_driver_array, etc.) for port_data's pins, we get into trouble on
multiport SRAMs. To avoid this we use explicit names for br/bl depending
on the port number in port_data. Now each submodule does no longer need to
figure out the right name depending on the port number.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-17 14:18:32 +01:00
Joey Kunzler 125bcafb3e fixed purposes for gdsMill 2020-02-15 15:00:30 -08:00
Bastian Koppelmann 87b5a48f9e bitcell: Remove hardcoded signal pins 
use names provided by the tech file, which can be overriden by the
technology.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:51 +01:00
Bastian Koppelmann c97bad72db custom_cell_properties: Add bitcell pin name API 
this allows users to overrride the pin names to match the names of their
GDS.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:51 +01:00
Bastian Koppelmann f6302caeac replica_bitcell_array: Connect bitcells based on bitcell bl/br/wl names 
this allows us to override the bl/br/wl names of each bitcell.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:37:47 +01:00
Bastian Koppelmann f9babcf666 port_data: Each submodule now specifies their bl/br names 
before the names of bl/br from the bitcell were assumed. If we want to
allow renaming of bl/br from bitcells, we have to seperate the other
modules from that. Note, that we don't touch every occurence of bl/br,
but only the once necessary that pin renaming of the bitcell works.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:00:50 +01:00
Bastian Koppelmann 64bf93e4e5 bank: Connect instances by their individual bl/br names 
each module should be able to state how their bl/br lines are named. Here we
always connect port_data with the bitcell_array, so port_data needs function
that return the names of bl/br.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-02-12 15:00:50 +01:00
Jesse Cirimelli-Low a23f72d5a3 Merge branch 'dev' of https://github.com/VLSIDA/PrivateRAM into dev 2020-02-12 06:54:03 +00:00
Jesse Cirimelli-Low aedbc5f968 merge custom cell and module properties 2020-02-12 04:09:40 +00:00
mrg 5928a93772 Merge branch 'dev' into tech_migration 2020-02-10 22:42:50 +00:00
mrg 0ef06ec1e1 Fix dff_buf width in netlist_only mode 2020-02-10 20:06:34 +00:00
mrg 6bf33a980f Add conservative well spacing between library FF and our pgates. 2020-02-10 19:28:30 +00:00
mrg f7915ec55e Route to top of NMOS to prevent poly overlap nmos 2020-02-10 17:12:39 +00:00
jcirimel 101eb28112 revert example scn4m to non netlist only 2020-02-09 23:52:11 -08:00
jcirimel 27eced1fbe netlist_only done 2020-02-09 23:51:01 -08:00
jcirimel 7038fad930 s8 gdsless netlist only working up to pdriver 2020-02-09 23:10:33 -08:00
jcirimel b212b3e85a s8 gdsless netlist only working up to dff array 2020-02-09 21:37:09 -08:00
mrg 4d85640a00 Change col addr spacing to col addr size 2020-02-07 22:20:16 +00:00
mrg 2ff058f5d5 PEP8 Cleanup and reverse pitch offset of col addr routing 2020-02-06 22:59:30 +00:00
mrg 4b06ab9eaf Move port 2 column address bus down. 
PEP 8 cleanup.
 2020-02-06 19:46:10 +00:00
mrg 5e514215d5 Force vertical vias on pnand3 2020-02-06 16:44:19 +00:00
mrg f0ecf385e8 Nwell fixes in pgates. 
Fix minor PEP8 format fixes.
Fix nwell to be 55% of cell height.
Move contact in hierarchical decoder for DRC error.
 2020-02-06 16:20:09 +00:00
Jesse Cirimelli-Low b107934672 fix styling 2020-02-06 12:15:52 +00:00
Jesse Cirimelli-Low 3a06141030 add simple sram sizing for netlist only 2020-02-06 12:10:49 +00:00
mrg 596302d9a9 Update pgate well and well contacts. 
Extend well left and right past a cell boundary.
Use asymmetric well contacts.
 2020-02-05 18:22:45 +00:00
mrg 04d254542d Add general well_extend_active DRC in design class. 2020-02-05 18:22:22 +00:00
mrg 4526986de3 Update contact well support. 
Add asymmetric tap overlap support in DRC rules.
Add static nwell and pwell contact in class for measurements.
 2020-02-05 18:21:01 +00:00
jcirimel 7cb3091140 Merge branch 'dev' of https://github.com/VLSIDA/PrivateRAM into custom_mod 2020-02-04 23:40:54 -08:00
jcirimel ed11145ca4 add custom module file, make dff clk pin dynamic 2020-02-04 23:35:06 -08:00
mrg 304971ff60 Fix ptx so nmos and pmos have same active offset and gates align 2020-02-04 17:38:35 +00:00
mrg 53217e4030 Check min well width in contact and redo position 2020-02-04 17:37:58 +00:00
mrg 5aed893725 Add nwell/pwell tap test 2020-02-03 18:41:06 +00:00
mrg 34c9b3a0a5 Fix well offset computation for PMOS 2020-02-03 17:37:53 +00:00
Jesse Cirimelli-Low 6cf20a0353 add technology based module customization 2020-01-30 19:44:24 +00:00
mrg 400cf0333a Pgates are 8 M1 high by default. Port data is bitcell height. 2020-01-30 03:34:04 +00:00
mrg 0880c393fd Fix base bitcell syntax error. Remove some unused imports. 2020-01-30 01:58:30 +00:00
mrg 79391b84da Cleanup and rename vias. 2020-01-30 01:45:33 +00:00
Matt Guthaus 3147b99ce0 Merge remote-tracking branch 'bkoppelmann/bit-sym' into dev 2020-01-29 11:24:09 -08:00
Bastian Koppelmann b5701af864 column_mux: Allow y axis mirroring 
since the bitlines alternate in the bitcell array we also need to mirror
the port_data elements.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:39 +01:00
Bastian Koppelmann ed66fca031 write_driver/sense_amp/precharge arrays: Allow y axis mirroring 
since the bitlines alternate in the bitcell array we also need to mirror
the port_data elements.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:39 +01:00
Bastian Koppelmann dd1afe0313 Bitcell arrays: Allow mirroring on the y axis 
this allows for bitcells that need to be mirrored on the y axis, like
thin cells. However, the portdata elements also need to be mirrored on
the y axis. Otherwise the router will fail horribly when connecting
bitlines.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:51:21 +01:00
Bastian Koppelmann df9f351a91 Add custom cell properties to technologies 
this is technology specific database to store data about the custom
design cells. For now it only contains on which axis the bitcells are
mirrored. This is a first step to support thin cells that need to be
mirrored on the x and y axis.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 15:46:14 +01:00
Bastian Koppelmann 9749c522d1 tech: Make power_grid configurable 
this is the first step to allow engineers, porting technologies, more room
for routing their handmade cells.

For now, we don't allow the specification of power_grids where the lower layer
prefers to be routed vertically. This is due to the router not
connecting some pins properly in that case.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 12:06:34 +01:00
Bastian Koppelmann 90a4a72bba modules: Use add_power_pin API for all modules 
sense_amp_array, write_driver_array, and single_column_mux were the only offenders.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 11:47:49 +01:00
Bastian Koppelmann 988df8ebb9 hierarchy_layout: Add methods to create via stacks 
this allows us to simplify add_power_pin() and gives a clean
API to create vias through multiple layers.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 11:47:32 +01:00
Bastian Koppelmann 3fb2b9c1c3 Bitcell arrays: Create abstract base class 
a lot of functions of dummy- and bitcell-array are either copy-pasted or
have just slight differences. Merge all of those into an abstract base
class such that we don't have too much duplicate code.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-28 10:59:58 +01:00
Matt Guthaus e62beae805 Merge branch 'tech_migration' into dev 2020-01-25 12:03:56 -08:00
mrg 877ea53b7f Fix conflicting boundary name 2020-01-24 21:24:44 +00:00
mrg 71cbe74017 Round middle position fix 2020-01-24 18:00:28 +00:00
mrg aa8f389f28 Add fudge factor to pbitcell wells 2020-01-24 17:45:24 +00:00
mrg 9beb0f4ece Add separate well design rules. 
Needed to fix various pgates with wells.
Did some cleanup of these gates as well.
 2020-01-23 19:43:41 +00:00
mrg 306740f0f3 Add empty minarea function 2020-01-16 19:27:59 +00:00
mrg 262782cba0 Remove print, fix compare 2020-01-16 19:27:39 +00:00
mrg a2387da29d PEP format design 2020-01-16 19:26:57 +00:00
mrg ea00258be9 Cleanup contact 2020-01-16 19:26:43 +00:00
Bastian Koppelmann 2c610036b2 router/supply_grid_router: Print init time to the user 
this can take considerable amount of time, so the user knows that
useful work is done.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 12:24:14 +01:00
Bastian Koppelmann c0c89e465a vector: Implement hash cache for vector3d and vector 
this gives us a small runtime improvement in the router.

For FreePDK45 word_size=8, num_words=256

Improved
*** Maze routing supplies: 89.8 seconds
** Routing: 279.3 seconds

Non-improved
*** Maze routing supplies: 105.1 seconds
** Routing: 293.5 seconds

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 12:16:10 +01:00
Bastian Koppelmann 7ff5121d8c base/pin_layout: Implement hash cache 
the hash value only depends of the properties 'rect' and 'layer' so we
only compute the hash if those values are changed. Otherwise we just
return the precomputed value. This gives us a major speedup (~10x) if
the hash is used as a key in a dict.

During the grouping of pins in analyze_pins() this gives the best
improvements. For example for FreePDK45 with num_bits=8, num_words=256

Improved
**** Analyzing pins: 20.9 seconds
** Routing: 293.8 seconds
** SRAM creation: 349.8 seconds

Non-improved
**** Analyzing pins: 267.9 seconds
** Routing: 537.5 seconds
** SRAM creation: 592.9 seconds

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 11:39:59 +01:00
Bastian Koppelmann 14e8a26246 base/pin_layout: Make rect and layer properties 
only rect and layer are used to compute the hash for a pin. Having
those as properties allows us to cache the hash value and only update it
if either rect or layer are written.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2020-01-03 11:33:34 +01:00
Matthew Guthaus a6f5e59e18 Remove unused layers and simplify layer check to work without it. 2019-12-23 21:49:47 +00:00
Matthew Guthaus 082f575e2a Use active_width in ptx again despite colliding with DRC rule 2019-12-23 21:45:09 +00:00
Matthew Guthaus bec12f5b94 Cleanup. 2019-12-23 21:16:08 +00:00
Matt Guthaus 4ad920eaf7 Small fixes to tech usage. 2019-12-23 08:42:52 -08:00
Matt Guthaus 9ad06a7770 Move write mask vias to center to avoid data pins. 2019-12-20 11:48:27 -08:00
Matt Guthaus 89396698ef Non-preferred via in pnand active 2019-12-20 10:36:14 -08:00
Matt Guthaus 82496a66fe Simplify supply code. 2019-12-20 10:35:57 -08:00
Matt Guthaus 9e8b03d6c2 Merge branch 'dev' into tech_migration 2019-12-19 16:23:22 -08:00
Matt Guthaus d2461e5011 Supply indexing bug resolved. Recompute width/height basted on insts. 2019-12-19 16:19:21 -08:00
Matt Guthaus 0da8164ea6 Remove some unnecessary via directions. 2019-12-19 13:54:50 -08:00
Matt Guthaus b7d78ec2ec Fix ptx active contact orientation to non-default M1 direction. 2019-12-19 12:54:10 -08:00
Bastian Koppelmann 11760a9993 sram_factory: Add check for duplicate module name 
sram_factory cannot handle duplicate module name, thus we bail out and
raise an error if a user attempts that.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-19 16:31:52 +01:00
Bastian Koppelmann 1df16eceb6 sram_factory: Give proper priority to overrides 
modules overridden by the user are the highest priority, then modules
overridden by the technology. If nothing is overriden, use the defaults
from OPTS (if they exist) or use the requested module_type.

This fixes that custom tech_modules could not be used, if they had a default in
OPTS even if the latter was not overridden by the user.

We don't need extra defaults in the tech_modules, as we now only use them,
if they have been overridden by the tech_module.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-19 15:58:00 +01:00
Matt Guthaus 36cb675150 Fix minwidth for multiple via bug. 2019-12-18 09:30:00 -08:00
Bastian Koppelmann fab963701b sram_base: Instantiate "dff_array" and "bank" through sram_factory 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:50 +01:00
Bastian Koppelmann 451ef4d896 sram_factory: Allow a prefered module name 
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:47 +01:00
Bastian Koppelmann de6b207798 hierachy_layout: Move number of via arg to add_power_pins() 
this allows custom modules to state how many vias they need
for power rails.

Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
 2019-12-18 17:33:43 +01:00