Version bump

* v3Os: include <windows.h> instead of <winnt.h>

The windows.h header file should be included prior to any other headers,
in order to ensure all definitions are available.  By only including
some headers, such as winnt.h, many "undefined symbol" messages are
generated.

Include "windows.h" to fix the build on msys2 under mingw64.

Signed-off-by: Sean Cross <[email protected]>

* configure: check for bcrypt and psapi on windows

These two libraries must be linked in order to have access to
BCryptGenRandom and GetProcessMemoryInfo respectively.

Signed-off-by: Sean Cross <[email protected]>

.clang-format

@@ -0,0 +1,111 @@
+---
+Language:        Cpp
+# BasedOnStyle:  LLVM
+AccessModifierOffset: -4
+AlignAfterOpenBracket: Align
+AlignConsecutiveAssignments: false
+AlignConsecutiveDeclarations: false
+AlignEscapedNewlines: DontAlign
+AlignOperands:   true
+AlignTrailingComments: false
+AllowAllParametersOfDeclarationOnNextLine: true
+AllowShortBlocksOnASingleLine: true
+AllowShortCaseLabelsOnASingleLine: true
+AllowShortFunctionsOnASingleLine: All
+AllowShortIfStatementsOnASingleLine: true
+AllowShortLoopsOnASingleLine: false
+AlwaysBreakAfterDefinitionReturnType: None
+AlwaysBreakAfterReturnType: None
+AlwaysBreakBeforeMultilineStrings: false
+AlwaysBreakTemplateDeclarations: false
+BinPackArguments: true
+BinPackParameters: true
+BraceWrapping:   
+  AfterClass:      false
+  AfterControlStatement: false
+  AfterEnum:       false
+  AfterFunction:   false
+  AfterNamespace:  false
+  AfterObjCDeclaration: false
+  AfterStruct:     false
+  AfterUnion:      false
+  AfterExternBlock: false
+  BeforeCatch:     false
+  BeforeElse:      false
+  IndentBraces:    false
+  SplitEmptyFunction: true
+  SplitEmptyRecord: true
+  SplitEmptyNamespace: true
+BreakBeforeBinaryOperators: All
+BreakBeforeBraces: Attach
+BreakBeforeInheritanceComma: false
+BreakBeforeTernaryOperators: true
+BreakConstructorInitializersBeforeComma: false
+BreakConstructorInitializers: BeforeComma
+BreakAfterJavaFieldAnnotations: false
+BreakStringLiterals: true
+ColumnLimit:     99
+CommentPragmas:  '^ IWYU pragma:'
+CompactNamespaces: false
+ConstructorInitializerAllOnOneLineOrOnePerLine: false
+ConstructorInitializerIndentWidth: 4
+ContinuationIndentWidth: 4
+Cpp11BracedListStyle: true
+DerivePointerAlignment: false
+DisableFormat:   false
+ExperimentalAutoDetectBinPacking: false
+FixNamespaceComments: true
+ForEachMacros:   
+  - foreach
+  - Q_FOREACH
+  - BOOST_FOREACH
+IncludeBlocks:   Preserve
+IncludeCategories: 
+  - Regex:           '^"(llvm|llvm-c|clang|clang-c)/'
+    Priority:        2
+  - Regex:           '^(<|"(gtest|gmock|isl|json)/)'
+    Priority:        3
+  - Regex:           '.*'
+    Priority:        1
+IncludeIsMainRegex: '(Test)?$'
+IndentCaseLabels: false
+IndentPPDirectives: None
+IndentWidth:     4
+IndentWrappedFunctionNames: false
+JavaScriptQuotes: Leave
+JavaScriptWrapImports: true
+KeepEmptyLinesAtTheStartOfBlocks: true
+MacroBlockBegin: ''
+MacroBlockEnd:   ''
+MaxEmptyLinesToKeep: 1
+NamespaceIndentation: None
+ObjCBlockIndentWidth: 2
+ObjCSpaceAfterProperty: false
+ObjCSpaceBeforeProtocolList: true
+PenaltyBreakAssignment: 2
+PenaltyBreakBeforeFirstCallParameter: 19
+PenaltyBreakComment: 300
+PenaltyBreakFirstLessLess: 120
+PenaltyBreakString: 1000
+PenaltyExcessCharacter: 1000000
+PenaltyReturnTypeOnItsOwnLine: 60
+PointerAlignment: Left
+ReflowComments:  true
+SortIncludes:    false
+SortUsingDeclarations: true
+SpaceAfterCStyleCast: false
+SpaceAfterTemplateKeyword: true
+SpaceBeforeAssignmentOperators: true
+SpaceBeforeParens: ControlStatements
+SpaceInEmptyParentheses: false
+SpacesBeforeTrailingComments: 2
+SpacesInAngles:  false
+SpacesInContainerLiterals: true
+SpacesInCStyleCastParentheses: false
+SpacesInParentheses: false
+SpacesInSquareBrackets: false
+Standard:        Cpp03
+TabWidth:        8
+UseTab:          Never
+...
+

.clang-tidy

@@ -2,7 +2,7 @@ Checks:          'clang-diagnostic-*,clang-analyzer-*,*,-modernize*,-hicpp*,-and
 WarningsAsErrors: ''
 HeaderFilterRegex: ''
 FormatStyle:     none
-CheckOptions:    
+CheckOptions:
   - key:             google-readability-braces-around-statements.ShortStatementLines
     value:           '2'
   - key:             google-readability-namespace-comments.SpacesBeforeComments

.codacy.yml

@@ -0,0 +1,5 @@
+---
+exclude_paths:
+  - '.github/**'
+  - 'ci/build_verilator.sh'
+  - 'include/vltstd/**'

.github/ISSUE_TEMPLATE/bug_report.md

@@ -0,0 +1,14 @@
+---
+name: Bug report
+about: Something isn't working as expected, and it isn't "Unsupported." (Note our contributor agreement at https://github.com/verilator/verilator/.github/blob/master/CONTRIBUTING.adoc)
+title: ''
+labels: new
+assignees: ''
+
+---
+
+Thanks for taking the time to report this.
+
+Can you attach an example that shows the issue?  (Must be openly licensed, ideally in test_regress format.)
+
+May we assist you in trying to fix this yourself?

.github/ISSUE_TEMPLATE/feature.md

@@ -0,0 +1,16 @@
+---
+name: Feature Request
+about: Request something should be supported, or a new feature added. (Note our contributor agreement at https://github.com/verilator/verilator/.github/blob/master/CONTRIBUTING.adoc)
+title: ''
+labels: new
+assignees: ''
+
+---
+
+Thanks for taking the time to report this.
+
+What would you like added/supported?
+
+Can you attach an example that runs on other simulators?  (Must be openly licensed, ideally in test_regress format.)
+
+May we assist you in trying to fix this yourself?

.github/ISSUE_TEMPLATE/questions.md

@@ -0,0 +1,10 @@
+---
+name: Q and A, or Other
+about: Ask a question, not related to a specific bug or feature request. (Note our contributor agreement at https://github.com/verilator/verilator/.github/blob/master/CONTRIBUTING.adoc)
+title: ''
+labels: new
+assignees: ''
+
+---
+
+How may we help - what is your question?

.github/PULL_REQUEST_TEMPLATE.md

@@ -0,0 +1 @@
+We appreciate your contributing to Verilator.  If this is your first commit, please add your name to docs/CONTRIBUTORS, and read our contributing guidelines in docs/CONTRIBUTING.adoc.

.github/labels.toml

@@ -0,0 +1,199 @@
+["area: assertions"]
+color = "ffffe8"
+name = "area: assertions"
+description = "Issue involves assertions"
+
+["area: configure/compiling"]
+color = "ffffe8"
+name = "area: configure/compiling"
+description = "Issue involves configuring or compilating Verilator itself"
+
+["area: coverage"]
+color = "ffffe8"
+name = "area: coverage"
+description = "Issue involves coverage generation"
+
+["area: data-types"]
+color = "ffffe8"
+name = "area: data-types"
+description = "Issue involves data-types"
+
+["area: documentation"]
+color = "ffffe8"
+name = "area: documentation"
+description = "Issue involves documentation"
+
+["area: elaboration"]
+color = "ffffe8"
+name = "area: elaboration"
+description = "Issue involves elaboration phase"
+
+["area: invoking/options"]
+color = "ffffe8"
+name = "area: invoking/options"
+description = "Issue involves options passed to Verilator"
+
+["area: lint"]
+color = "ffffe8"
+name = "area: lint"
+description = "Issue involves SystemVerilog lint checking"
+
+["area: parser"]
+color = "ffffe8"
+name = "area: parser"
+description = "Issue involves SystemVerilog parsing"
+
+["area: performance"]
+color = "ffffe8"
+name = "area: performance"
+description = "Issue involves performance issues"
+
+["area: portability"]
+color = "ffffe8"
+name = "area: portability"
+description = "Issue involves operating system/compiler portability"
+
+["area: runtime result"]
+color = "ffffe8"
+name = "area: runtime result"
+description = "Issue involves an incorrect runtine result from Verilated model"
+
+["area: scheduling"]
+color = "ffffe8"
+name = "area: scheduling"
+description = "Issue involves scheduling/ordering of events"
+
+["area: tests"]
+color = "ffffe8"
+name = "area: tests"
+description = "Issue involves the testing system"
+
+["area: usability"]
+color = "ffffe8"
+name = "area: usability"
+description = "Issue involves general usability"
+
+["effort: days"]
+color = "d0c0b0"
+name = "effort: days"
+description = "Expect this issue to require roughly days of invested effort to resolve"
+
+["effort: hours"]
+color = "f5e6d6"
+name = "effort: hours"
+description = "Expect this issue to require roughly hours of invested effort to resolve"
+
+["effort: minutes"]
+color = "f5e6d6"
+name = "effort: minutes"
+description = "Expect this issue to require less than an hour of invested effort to resolve"
+
+["effort: weeks"]
+color = "d0c0b0"
+name = "effort: weeks"
+description = "Expect this issue to require weeks or more of invested effort to resolve"
+
+["good first issue"]
+color = "7057ff"
+name = "good first issue"
+description = "Good for newcomers"
+
+["help wanted"]
+color = "008672"
+name = "help wanted"
+description = "Extra attention is needed"
+
+["new"]
+color = "ff4400"
+name = "new"
+description = "New issue, not yet seen by maintainers"
+
+["resolution: abandoned"]
+color = "cfd3d7"
+name = "resolution: abandoned"
+description = "Closed; not enough information or otherwise never finished"
+
+["resolution: answered"]
+color = "cfd3d7"
+name = "resolution: answered"
+description = "Closed; only applies to questions which were answered"
+
+["resolution: duplicate"]
+color = "cfd3d7"
+name = "resolution: duplicate"
+description = "Closed; issue or pull request already exists"
+
+["resolution: external"]
+color = "cfd3d7"
+name = "resolution: external"
+description = "Closed; passed to another tool's bug tracker"
+
+["resolution: fixed"]
+color = "cfd3d7"
+name = "resolution: fixed"
+description = "Closed; fixed"
+
+["resolution: invalid"]
+color = "cfd3d7"
+name = "resolution: invalid"
+description = "Closed; issue or pull request is no longer relevant"
+
+["resolution: no fix needed"]
+color = "cfd3d7"
+name = "resolution: no fix needed"
+description = "Closed; no fix required (not a bug)"
+
+["resolution: wontfix"]
+color = "cfd3d7"
+name = "resolution: wontfix"
+description = "Closed; work won't continue on an issue or pull request"
+
+["status: asked reporter"]
+color = "ffffff"
+name = "status: asked reporter"
+description = "Bug is waiting for reporter to answer a question"
+
+["status: assigned"]
+color = "a0f0ff"
+name = "status: assigned"
+description = "Issue is assigned to someone to work on"
+
+["status: blocked"]
+color = "00007f"
+name = "status: blocked"
+description = "Issue is waiting for another bug, when other bug is fixed, then goes to 'status: assigned'"
+
+["status: discussion"]
+color = "d876e3"
+name = "status: discussion"
+description = "Issue is waiting for discussions to resolve"
+
+["status: ready"]
+color = "b6c92a"
+name = "status: ready"
+description = "Issue is ready for someone to fix; then goes to 'status: assigned'"
+
+["type: bug"]
+color = "d73a4a"
+name = "type: bug"
+description = "Defect"
+
+["type: feature-IEEE"]
+color = "cfccff"
+name = "type: feature-IEEE"
+description = "Request to add new feature, described in IEEE 1800"
+
+["type: feature-non-IEEE"]
+color = "cfccff"
+name = "type: feature-non-IEEE"
+description = "Request to add new feature, outside IEEE 1800"
+
+["type: maintenance"]
+color = "cfccff"
+name = "type: maintenance"
+description = "Internal maintenance task"
+
+["type: q and a"]
+color = "84ba34"
+name = "type: q and a"
+description = "Question and answer about some feature or user question"

.gitignore

@@ -17,6 +17,7 @@
 README
 TAGS
 autom4te.cache
+compile_commands.json
 config.cache
 config.status
 configure
@@ -30,4 +31,6 @@ verilator.txt
 verilator_bin*
 verilator_coverage_bin*
 verilator.pc
+verilator-config.cmake
+verilator-config-version.cmake
 **/obj_dir/*

.travis.yml

@@ -0,0 +1,187 @@
+# DESCRIPTION: Travis-CI config
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+version: ~> 1.0
+
+os: linux
+language: cpp
+cache: ccache
+
+env:
+  global:
+    - VERILATOR_CACHE=$HOME/verilator_cache
+    - VERILATOR_ROOT=$PWD
+    - VERILATOR_NUM_JOBS=$(echo `nproc` + 1 | bc)
+    - VERILATOR_CONFIG_FLAGS="--enable-maintainer-mode --enable-longtests"
+    - VERILATOR_AUTHOR_SITE=1
+    - OBJCACHE=ccache
+
+cache:
+  directories:
+    - $VERILATOR_CACHE
+
+before_install:
+# Perl modules needed for testing
+# Not listing Bit::Vector as slow to install, and only skips one test
+  - yes yes | sudo cpan -fi Unix::Processors Parallel::Forker
+  - sudo apt-get install gdb gtkwave
+  - sudo apt-get install libgoogle-perftools-dev
+before_script:
+  - bash -x ci/build_vcddiff.sh
+  - bash -x ci/build_verilator.sh
+after_script:
+  - ccache -s
+
+stages:
+  - "Build Verilator"
+  - test
+
+jobs:
+  include:
+    - if: type != cron
+      stage: "Build Verilator"
+      name: Build Verilator
+      compiler: gcc
+      script: echo "Done building Verilator"
+# Non-cron build will just run on whatever linux flavor we get
+    - if: type != cron
+      stage: test
+      name: Dist test
+      compiler: gcc
+      script: ci/test.sh dist
+    - if: type != cron
+      stage: test
+      name: Vlt test
+      compiler: gcc
+      script: ci/test.sh vlt
+    - if: type != cron
+      stage: test
+      name: Vltmt set 0 test
+      compiler: gcc
+      script: ci/test.sh vltmt0
+    - if: type != cron
+      stage: test
+      name: Vltmt set 1 test
+      compiler: gcc
+      script: ci/test.sh vltmt1
+# Cron builds try different OS/compiler combinations
+    - if: type = cron
+      stage: "Build Verilator"
+      name: Build xenial gcc Verilator
+      os: linux
+      dist: xenial
+      compiler: gcc
+      script: echo "Done building Verilator"
+    - if: type = cron
+      stage: test
+      name: Xenial gcc dist test
+      os: linux
+      dist: xenial
+      compiler: gcc
+      script: ci/test.sh dist
+    - if: type = cron
+      stage: test
+      name: Xenial gcc vlt test
+      os: linux
+      dist: xenial
+      compiler: gcc
+      script: ci/test.sh vlt
+    - if: type = cron
+      stage: test
+      name: Xenial gcc vltmt test
+      os: linux
+      dist: xenial
+      compiler: gcc
+      script: ci/test.sh vltmt
+    - if: type = cron
+      stage: "Build Verilator"
+      name: Build xenial clang Verilator
+      os: linux
+      dist: xenial
+      compiler: clang
+      script: echo "Done building Verilator"
+    - if: type = cron
+      stage: test
+      name: Xenial clang dist test
+      os: linux
+      dist: xenial
+      compiler: clang
+      script: ci/test.sh dist
+    - if: type = cron
+      stage: test
+      name: Xenial clang vlt test
+      os: linux
+      dist: xenial
+      compiler: clang
+      script: ci/test.sh vlt
+    - if: type = cron
+      stage: test
+      name: Xenial clang vltmt test
+      os: linux
+      dist: xenial
+      compiler: clang
+      script: ci/test.sh vltmt
+#    - if: type = cron
+#      stage: "Build Verilator"
+#      name: Build OSX gcc Verilator
+#      os: osx
+#      compiler: gcc
+#      script: echo "Done building Verilator"
+#    - if: type = cron
+#      stage: test
+#      name: OSX gcc dist test
+#      os: osx
+#      compiler: gcc
+#      script: ci/test.sh dist
+#    - if: type = cron
+#      stage: test
+#      name: OSX gcc vlt test
+#      os: osx
+#      compiler: gcc
+#      script: ci/test.sh vlt
+#    - if: type = cron
+#      stage: test
+#      name: OSX gcc vltmt test
+#      os: osx
+#      compiler: gcc
+#      script: ci/test.sh vltmt
+    - if: type = cron
+      stage: "Build Verilator"
+      name: Build trusty gcc Verilator
+      os: linux
+      dist: trusty
+      compiler: gcc
+      script: echo "Done building Verilator"
+    - if: type = cron
+      stage: test
+      name: Trusty gcc dist test
+      os: linux
+      dist: trusty
+      compiler: gcc
+      script: ci/test.sh dist
+    - if: type = cron
+      stage: test
+      name: Trusty gcc vlt test
+      os: linux
+      dist: trusty
+      compiler: gcc
+      script: ci/test.sh vlt
+    - if: type = cron
+      stage: test
+      os: linux
+      dist: trusty
+      name: Trusty gcc vltmt test
+      compiler: gcc
+      script: ci/test.sh vltmt
+
+notifications:
+  email:
+    if: repo = verilator/verilator
+    recipients:
+      - [email protected]
+      - [email protected]

MANIFEST.SKIP

@@ -1,6 +1,8 @@
+\.clang-format
 \.clang-tidy
 \.git/
 \.git$
+\.github/
 \.svn/
 \.(bak|old)/
 \.(bak|old)$
@@ -14,22 +16,31 @@
 .*\.key
 .*\.vcd
 .*\.1
-/obj_dir/
+\.codacy\.yml
+\.travis\.yml
+/build/
 /obj_dbg/
+/obj_dir/
+/obj_dist/
+/obj_iv/
 /obj_nc/
 /obj_opt/
 /obj_vcs/
 /obj_vlt/
 /obj_vltmt/
-/obj_dist/
-/INCA_libs/
+INCA_libs/
 /cov_work/
 /logs/
 ^Makefile$
+README.html
 bin/verilator_bin.*
 bin/verilator_coverage_bin.*
+docs/.*\.html$
 docs/Makefile$
+docs/clang-format.txt$
 docs/doxygen-doc/.*
+examples/xml_py/copied/
+examples/xml_py/graph.*
 src/Makefile$
 src/Makefile_obj$
 include/verilated.mk$
@@ -38,6 +49,8 @@ config.cache$
 config.status$
 verilator\.log
 verilator\.tex
+verilator-config.cmake$
+verilator-config-version.cmake$
 verilator.pc$
 verilator_bin.*
 verilator_coverage_bin.*
@@ -45,10 +58,11 @@ verilator_coverage_bin.*
 ncverilog.history
 autom4te\.cache/
 nodist/
+ci/
 /simv$
 /simv.daidir/
 /vc_hdrs.h$
 /csrc/
-obj_dir/.*
+obj_dir.*
 TAGS
 .*~

Makefile.in

@@ -3,19 +3,15 @@
 #
 # This file is part of Verilator.
 #
-# Code available from: http://www.veripool.org/verilator
+# Code available from: https://verilator.org
 #
 #*****************************************************************************
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
-#
-# Verilator is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 #****************************************************************************/
 #
@@ -83,7 +79,7 @@ infodir = @infodir@
 pkgdatadir = @pkgdatadir@
 
 # Directory in which to install pkgconfig file
-# Generall ${prefix}/share/pkgconfig
+# Generally ${prefix}/share/pkgconfig
 pkgconfigdir = @pkgconfigdir@
 
 # Directory in which to install data across multiple architectures
@@ -103,13 +99,22 @@ PACKAGE_VERSION = @PACKAGE_VERSION@
 
 SHELL = /bin/sh
 
-SUBDIRS = src test_regress \
-	examples/hello_world_c  examples/hello_world_sc \
-	examples/tracing_c  examples/tracing_sc \
+SUBDIRS = docs src test_regress \
+	examples/cmake_hello_c \
+	examples/cmake_hello_sc \
+	examples/cmake_tracing_c \
+	examples/cmake_tracing_sc \
+	examples/cmake_protect_lib \
+	examples/make_hello_c \
+	examples/make_hello_sc \
+	examples/make_tracing_c \
+	examples/make_tracing_sc \
+	examples/make_protect_lib \
+	examples/xml_py \
 
-INFOS = README README.html README.pdf internals.txt internals.html \
-        internals.pdf verilator.txt verilator.html verilator.pdf \
-	$(VL_INST_MAN_FILES)
+INFOS = verilator.txt verilator.html verilator.pdf
+
+INFOS_OLD = README README.html README.pdf
 
 # Files that can be generated, but should be up to date for a distribution.
 DISTDEP = info Makefile
@@ -120,6 +125,9 @@ DISTFILES_INC = $(INFOS) .gitignore \
 	Changes \
 	LICENSE \
 	MANIFEST.SKIP \
+	README.adoc \
+	verilator-config.cmake.in \
+	verilator-config-version.cmake.in \
 	bin/verilator \
 	bin/verilator_coverage \
 	bin/verilator_difftree \
@@ -127,12 +135,16 @@ DISTFILES_INC = $(INFOS) .gitignore \
 	bin/verilator_includer \
 	bin/verilator_profcfunc \
 	docs/.gitignore \
+	docs/CONTRIBUTING.adoc \
 	docs/CONTRIBUTORS \
 	docs/Makefile.in \
 	docs/TODO \
 	docs/doxygen-mainpage \
 	docs/doxygen.config \
+	docs/install.adoc \
+	docs/internals.adoc \
 	docs/verilator_logo.png \
+	docs/xml.adoc \
 	install-sh configure *.pod \
 	include/*.[chv]* \
 	include/*.in \
@@ -146,9 +158,15 @@ DISTFILES_INC = $(INFOS) .gitignore \
 	src/.gdbinit \
 	src/*.pl src/*.pod \
 	examples/*/.*ignore examples/*/Makefile* \
-	examples/*/*.[chv]* examples/*/*.pl \
+	examples/*/*.[chv]* examples/*/vl_* \
+	examples/*/CMakeLists.txt \
 	test_*/.*ignore test_*/Makefile* test_*/*.cpp \
 	test_*/*.pl test_*/*.v test_*/*.vc test_*/*.vh \
+	test_regress/*.pl \
+	test_regress/Makefile \
+	test_regress/Makefile_obj \
+	test_regress/input.vc \
+	test_regress/CMakeLists.txt \
 	test_regress/t/t*/*.sv* \
 	test_regress/t/t*/*.v* \
 	test_regress/t/t*/*/*.sv* \
@@ -180,11 +198,14 @@ INST_PROJ_BIN_FILES = \
 
 DISTFILES := $(DISTFILES_INC)
 
-ifeq ($(OBJCACHE_JOBS),)
-ifneq ($(OBJCACHE_HOSTS),)
-export OBJCACHE_JOBS := -j $(shell objcache --jobs "$(OBJCACHE_HOSTS)")
-endif
-endif
+EXAMPLES_FIRST = \
+	examples/make_hello_c \
+	examples/make_hello_sc \
+
+EXAMPLES = $(EXAMPLES_FIRST) $(filter-out $(EXAMPLES_FIRST), $(sort $(wildcard examples/*)))
+
+# See uninstall also - don't put wildcards in this variable, it might uninstall other stuff
+VL_INST_MAN_FILES = verilator.1 verilator_coverage.1 verilator_gantt.1 verilator_profcfunc.1
 
 default: all
 all: all_nomsg msg_test
@@ -208,7 +229,9 @@ msg_test: all_nomsg
 
 .PHONY: test
 ifeq ($(CFG_WITH_LONGTESTS),yes)	# Local... Else don't burden users
-test: smoke-test examples test_regress
+test: smoke-test test_regress
+# examples is part of test_regress's test_regress/t/t_a2_examples.pl
+# (because that allows it to run in parallel with other test_regress's)
 else
 test: smoke-test examples
 endif
@@ -219,14 +242,14 @@ endif
 	@echo
 
 smoke-test: all_nomsg
-	test_regress/t/t_a_first_cc.pl
-	test_regress/t/t_a_first_sc.pl
+	test_regress/t/t_a1_first_cc.pl
+	test_regress/t/t_a2_first_sc.pl
 
 test_regress: all_nomsg
 	$(MAKE) -C test_regress
 
 examples: all_nomsg
-	for p in examples/* ; do \
+	for p in $(EXAMPLES) ; do \
 	  $(MAKE) -C $$p VERILATOR_ROOT=`pwd` || exit 10; \
 	done
 
@@ -253,47 +276,12 @@ verilator.pdf: ${srcdir}/bin/verilator Makefile $(POD2LATEXFIX)
 	pdflatex verilator.tex
 	-rm -f verilator.toc verilator.aux verilator.idx verilator.out
 
-README: README.pod
-	-rm -f $@
-	$(POD2TEXT) --loose $< > $@
-
-README.html: README.pod
-	pod2html $< >$@
-
-# PDF needs DIST variables; but having configure.ac as dependency isn't detected
-README.pdf: README.pod Makefile $(POD2LATEXFIX)
-	pod2latex --full --out README.tex $<
-	$(PERL) $(POD2LATEXFIX) "$(DISTTITLE) README File" "${DISTDATE}" < README.tex > README2.tex
-	mv README2.tex README.tex
-	pdflatex README.tex
-	pdflatex README.tex
-	-rm -f README.toc README.aux README.idx README.out
-
-internals.txt: internals.pod
-	-rm -f $@
-	$(POD2TEXT) --loose $< > $@
-
-internals.html: internals.pod
-	pod2html $< >$@
-
-# PDF needs DIST variables; but having configure.ac as dependency isn't detected
-internals.pdf: internals.pod Makefile $(POD2LATEXFIX)
-	pod2latex --full --out internals.tex $<
-	$(PERL) $(POD2LATEXFIX) "$(DISTTITLE) Internals Manual" "${DISTDATE}" < internals.tex > internals2.tex
-	mv internals2.tex internals.tex
-	pdflatex internals.tex
-	pdflatex internals.tex
-	-rm -f internals.toc internals.aux internals.idx internals.out
-
 # See uninstall also - don't put wildcards in this variable, it might uninstall other stuff
 VL_INST_BIN_FILES = verilator verilator_bin verilator_bin_dbg verilator_coverage_bin_dbg \
 	verilator_coverage verilator_gantt verilator_includer verilator_profcfunc
 # Some scripts go into both the search path and pkgdatadir,
 # so they can be found by the user, and under $VERILATOR_ROOT.
 
-# See uninstall also - don't put wildcards in this variable, it might uninstall other stuff
-VL_INST_MAN_FILES = verilator.1 verilator_coverage.1 verilator_gantt.1 verilator_profcfunc.1
-
 VL_INST_INC_BLDDIR_FILES = \
 	include/verilated_config.h \
 	include/verilated.mk \
@@ -306,6 +294,7 @@ VL_INST_INC_SRCDIR_FILES = \
 
 VL_INST_DATA_SRCDIR_FILES = \
 	examples/*/*.[chv]*  examples/*/Makefile* \
+	examples/*/CMakeLists.txt
 
 installbin:
 	$(MKINSTALLDIRS) $(DESTDIR)$(bindir)
@@ -337,16 +326,24 @@ installdata:
 	; for p in $(VL_INST_INC_SRCDIR_FILES) ; do \
 	  $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p; \
 	done
-	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/hello_world_c
-	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/hello_world_sc
-	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/tracing_c
-	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/tracing_sc
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/make_hello_c
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/make_hello_sc
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/make_tracing_c
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/make_tracing_sc
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/make_protect_lib
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/cmake_hello_c
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/cmake_hello_sc
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/cmake_tracing_c
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/cmake_tracing_sc
+	$(MKINSTALLDIRS) $(DESTDIR)$(pkgdatadir)/examples/cmake_protect_lib
 	cd $(srcdir) \
 	; for p in $(VL_INST_DATA_SRCDIR_FILES) ; do \
 	  $(INSTALL_DATA) $$p $(DESTDIR)$(pkgdatadir)/$$p; \
 	done
 	$(MKINSTALLDIRS) $(DESTDIR)$(pkgconfigdir)
 	$(INSTALL_DATA) verilator.pc $(DESTDIR)$(pkgconfigdir)
+	$(INSTALL_DATA) verilator-config.cmake $(DESTDIR)$(pkgdatadir)
+	$(INSTALL_DATA) verilator-config-version.cmake $(DESTDIR)$(pkgdatadir)
 
 # We don't trust rm -rf, so rmdir instead as it will fail if user put in other files
 uninstall:
@@ -357,15 +354,24 @@ uninstall:
 	-cd $(DESTDIR)$(pkgdatadir) && rm -f $(VL_INST_INC_SRCDIR_FILES)
 	-cd $(DESTDIR)$(pkgdatadir) && rm -f $(VL_INST_DATA_SRCDIR_FILES)
 	-rm $(DESTDIR)$(pkgconfigdir)/verilator.pc
+	-rm $(DESTDIR)$(pkgdatadir)/verilator-config.cmake
+	-rm $(DESTDIR)$(pkgdatadir)/verilator-config-version.cmake
 	-rmdir $(DESTDIR)$(pkgdatadir)/bin
 	-rmdir $(DESTDIR)$(pkgdatadir)/include/gtkwave
 	-rmdir $(DESTDIR)$(pkgdatadir)/include/vltstd
 	-rmdir $(DESTDIR)$(pkgdatadir)/include
-	-rmdir $(DESTDIR)$(pkgdatadir)/examples/hello_world_c
-	-rmdir $(DESTDIR)$(pkgdatadir)/examples/hello_world_sc
-	-rmdir $(DESTDIR)$(pkgdatadir)/examples/tracing_c
-	-rmdir $(DESTDIR)$(pkgdatadir)/examples/tracing_sc
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/make_hello_c
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/make_hello_sc
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/make_tracing_c
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/make_tracing_sc
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/make_protect_lib
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/cmake_hello_c
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/cmake_hello_sc
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/cmake_tracing_c
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/cmake_tracing_sc
+	-rmdir $(DESTDIR)$(pkgdatadir)/examples/cmake_protect_lib
 	-rmdir $(DESTDIR)$(pkgdatadir)/examples
+	-rmdir $(DESTDIR)$(pkgdatadir)/cmake
 	-rmdir $(DESTDIR)$(pkgdatadir)
 	-rmdir $(DESTDIR)$(pkgconfigdir)
 
@@ -377,34 +383,9 @@ install-here: installman ftp
 ifeq ($(VERILATOR_AUTHOR_SITE),1)	# Local... Else don't burden users
 DISTNAMEREV = $(shell sed -e '/DTVERSION/!d' -e 's/.*verilator_\([^"]*\).*/\1/' -e q ${srcdir}/src/config_rev.h)
 
-DIRPROJECT := $(shell project_dir --project)
 VERILATOR_CAD_DIR = $(CAD_DIR)/verilator/$(DISTNAMEREV)/$(DIRPROJECT_ARCH)
 INST_PROJ_CVS = cp_if_cvs_diff
 
-install-project: dist
-	@echo "Install-project to $(DIRPROJECT)"
-	strip bin/verilator_bin*
-	strip bin/verilator_coverage_bin*
-	$(MAKE) install-project-quick
-	for p in $(VL_INST_MAN_FILES) ; do \
-	  $(INSTALL_DATA) $$p $(DIRPROJECT_PREFIX)/man/man1/$$p; \
-	done
-	$(INST_PROJ_CVS) $(DISTNAME).tgz $(DIRPROJECT)/hw/utils/verilator/verilator.tgz
-	rm $(DISTNAME).tgz
-
-install-project-quick:
-ifeq ($(CFG_WITH_DEFENV),yes)
-	@echo "%Error: Reconfigure with './configure --disable-defenv' to avoid hardcoded paths."
-	false
-endif
-	@echo "Install-project-quick (no strip) to $(DIRPROJECT)"
-	for p in $(INST_PROJ_FILES) ; do \
-	  $(INST_PROJ_CVS) $$p $(DIRPROJECT)/hw/utils/verilator/$$p; \
-	done
-	for p in $(INST_PROJ_BIN_FILES) ; do \
-	  $(INST_PROJ_CVS) $$p $(DIRPROJECT)/hw/utils/verilator/$$p-$(DIRPROJECT_ARCH); \
-	done
-
 install-cadtools: dist
 	@echo "Install-project to $(CAD_DIR)"
 	strip bin/verilator_bin*
@@ -445,7 +426,8 @@ CPPCHECK_H = $(wildcard \
 	$(srcdir)/src/*.h )
 CPPCHECK = src/cppcheck_filtered
 CPPCHECK_FLAGS = --enable=all --inline-suppr \
-	--suppress=unusedScopedObject --suppress=cstyleCast --suppress=useInitializationList
+	--suppress=unusedScopedObject --suppress=cstyleCast --suppress=useInitializationList \
+	--suppress=nullPointerRedundantCheck
 CPPCHECK_FLAGS += --xml
 CPPCHECK_DEP = $(subst .cpp,.cppcheck,$(CPPCHECK_CPP))
 CPPCHECK_INC = -I$(srcdir)/include -I$(srcdir)/src/obj_dbg -I$(srcdir)/src
@@ -482,7 +464,7 @@ install-msg:
 	@echo "Installed examples to $(DESTDIR)$(pkgdatadir)/examples"
 	@echo
 	@echo "For documentation see 'man verilator' or 'verilator --help'"
-	@echo "For forums and to report bugs see http://www.veripool.org/verilator"
+	@echo "For forums and to report bugs see https://verilator.org"
 	@echo
 
 IN_WILD := ${srcdir}/*.in ${srcdir}/*/*.in
@@ -521,11 +503,13 @@ clean mostlyclean distclean maintainer-clean::
 	rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs *.idx
 	rm -f *.ev *.evs *.ov *.ovs *.cv *.cvs *.ma *.mas
 	rm -f *.tex
+	rm -rf examples/*/obj_dir* examples/*/logs
 	rm -rf test_*/obj_dir
-	rm -rf examples/*/obj_dir examples/*/logs
+	rm -rf nodist/fuzzer/dictionary
+	rm -rf nodist/obj_dir
 
 distclean maintainer-clean::
-	rm -f *.info* *.1 $(INFOS)
+	rm -f *.info* *.1 $(INFOS) $(INFOS_OLD) $(VL_INST_MAN_FILES)
 	rm -f Makefile config.status config.cache config.log TAGS
 	rm -f verilator_bin* verilator_coverage_bin*
 	rm -f bin/verilator_bin* bin/verilator_coverage_bin*

README.adoc

@@ -0,0 +1,151 @@
+// Github doesn't render images unless absolute URL
+:!toc:
+
+ifdef::env-github[]
+image:https://img.shields.io/badge/License-LGPL%20v3-blue.svg[license LGPLv3,link=https://www.gnu.org/licenses/lgpl-3.0]
+image:https://img.shields.io/badge/License-Artistic%202.0-0298c3.svg[license Artistic-2.0,link=https://opensource.org/licenses/Artistic-2.0]
+image:https://api.codacy.com/project/badge/Grade/48478c986f13400682ffe4a5e0939b3a[Code Quality,link=https://www.codacy.com/gh/verilator/verilator]
+image:https://travis-ci.com/verilator/verilator.svg?branch=master[Build Status (Travis CI),link=https://travis-ci.com/verilator/verilator]
+endif::[]
+
+ifdef::env-github[]
+:link_verilator_contributing: link:docs/CONTRIBUTING.adoc
+:link_verilator_install: link:docs/install.adoc
+endif::[]
+ifndef::env-github[]
+:link_verilator_contributing: https://github.com/verilator/verilator/blob/master/docs/CONTRIBUTING.adoc
+:link_verilator_install: https://verilator.org/install
+endif::[]
+:link_verilator_commercial_support: https://verilator.org/verilator_commercial_support
+
+== Welcome to Verilator
+
+[cols="a,a",indent=0,frame="none"]
+|===
+^.^| *Welcome to Verilator, the fastest free Verilog HDL simulator.*
++++ <br/> +++ &bullet; Accepts synthesizable Verilog or SystemVerilog
++++ <br/> +++ &bullet; Performs lint code-quality checks
++++ <br/> +++ &bullet; Compiles into multithreaded {cpp}, or SystemC
++++ <br/> +++ &bullet; Creates XML to front-end your own tools
+<.^|image:https://www.veripool.org/img/verilator_256_200_min.png[Logo,256,200]
+
+>.^|image:https://www.veripool.org/img/verilator_multithreaded_performance_bg-min.png[,388,178]
+^.^| *Fast*
++++ <br/> +++ &bullet; Outperforms many commercial simulators
++++ <br/> +++ &bullet; Single- and multi-threaded output models
+
+^.^| *Widely Used*
++++ <br/> +++ &bullet; Wide industry and academic deployment
++++ <br/> +++ &bullet; Out-of-the-box support from Arm, and RISC-V vendor IP
+<.^|image:https://www.veripool.org/img/verilator_usage_400x200-min.png[,400,200]
+
+>.^|image:https://www.veripool.org/img/verilator_community_400x125-min.png[,400,125]
+^.^| *Community Driven & Openly Licensed*
++++ <br/> +++ &bullet; Guided by the https://chipsalliance.org/[CHIPS Alliance] and https://www.linuxfoundation.org/[Linux Foundation]
++++ <br/> +++ &bullet; Open, and free as in both speech and beer
++++ <br/> +++ &bullet; More simulation for your verification budget
+
+^.^| *Commercial Support Available*
++++ <br/> +++ &bullet; Commercial support contracts
++++ <br/> +++ &bullet; Design support contracts
++++ <br/> +++ &bullet; Enhancement contracts
+<.^|image:https://www.veripool.org/img/verilator_support_400x125-min.png[,400,125]
+
+|===
+
+== What Verilator Does
+
+Verilator is invoked with parameters similar to GCC or Synopsys's VCS.  It
+"Verilates" the specified synthesizable Verilog or SystemVerilog code by
+reading it, performing lint checks, and optionally inserting assertion
+checks and coverage-analysis points.  It outputs single- or multi-threaded
+.cpp and .h files, the "Verilated" code.
+
+The user writes a little {cpp}/SystemC wrapper file, which instantiates the
+"Verilated" model of the user's top level module.  These {cpp}/SystemC
+files are then compiled by a {cpp} compiler (gcc/clang/MSVC++).  The
+resulting executable performs the design simulation.  Verilator also
+supports linking its generated libraries, optionally encrypted, into other
+simulators.
+
+Verilator may not be the best choice if you are expecting a full featured
+replacement for NC-Verilog, VCS or another commercial Verilog simulator, or
+if you are looking for a behavioral Verilog simulator e.g. for a quick
+class project (we recommend http://iverilog.icarus.com[Icarus Verilog] for
+this.)  However, if you are looking for a path to migrate synthesizable
+Verilog to {cpp} or SystemC, and your team is comfortable writing just a
+touch of {cpp} code, Verilator is the tool for you.
+
+== Performance
+
+Verilator does not simply convert Verilog HDL to {cpp} or SystemC.  Rather
+than only translate, Verilator compiles your code into a much faster
+optimized and optionally thread-partitioned model, which is in turn wrapped
+inside a {cpp}/SystemC/{cpp}-under-Python module.  The results are a compiled Verilog
+model that executes even on a single-thread over 10x faster than standalone
+SystemC, and on a single thread is about 100 times faster than interpreted
+Verilog simulators such as http://iverilog.icarus.com[Icarus
+Verilog]. Another 2-10x speedup might be gained from multithreading
+(yielding 200-1000x total over interpreted simulators).
+
+Verilator has typically similar or better performance versus the commercial
+Verilog simulators (Carbon Design Systems Carbonator, Modelsim, Cadence
+Incisive/NC-Verilog, Synopsys VCS, VTOC, and Pragmatic CVer/CVC). But,
+Verilator is free, so you can spend on computes rather than licenses. Thus
+Verilator gives you more cycles/dollar than anything else available.
+
+For more information on how Verilator stacks up to some of the other
+commercial and free Verilog simulators, see the
+https://www.veripool.org/verilog_sim_benchmarks.html[Verilog Simulator
+Benchmarks].  (If you benchmark Verilator, please see the notes in the
+https://verilator.org/verilator_doc.pdf[Verilator manual (PDF)], and also
+if possible post on the forums the results; there may be additional tweaks
+possible.)
+
+== Installation & Documentation
+
+For more information:
+
+* {link_verilator_install}[Verilator installation and package directory
+  structure]
+
+* https://verilator.org/verilator_doc.html[Verilator manual (HTML)],
+or https://verilator.org/verilator_doc.pdf[Verilator manual (PDF)]
+
+* https://verilator.org/forum[Verilator forum]
+
+* https://verilator.org/issues[Verilator Issues]
+
+== Support
+
+Verilator is a community project, guided by the
+https://chipsalliance.org/[CHIPS Alliance] under the
+https://www.linuxfoundation.org/[Linux Foundation].
+
+We appreciate and welcome your contributions in whatever form; please see
+{link_verilator_contributing}[Contributing to Verilator].  Thanks to our
+https://verilator.org/verilator_doc.html#CONTRIBUTORS[Contributors and
+Sponsors].
+
+Verilator also supports and encourages commercial support models and
+organizations; please see {link_verilator_commercial_support}[Verilator
+Commercial Support].
+
+== Related Projects
+
+* http://gtkwave.sourceforge.net/[GTKwave] - Waveform viewer for Verilator
+traces.
+
+* http://iverilog.icarus.com[Icarus Verilog] - Icarus is a full featured
+interpreted Verilog simulator. If Verilator does not support your needs,
+perhaps Icarus may.
+
+== Open License
+
+Verilator is Copyright 2003-2020 by Wilson Snyder.  (Report bugs to
+https://verilator.org/issues[Verilator Issues].)
+
+Verilator is free software; you can redistribute it and/or modify it under
+the terms of either the GNU Lesser General Public License Version 3 or the
+Perl Artistic License Version 2.0.  See the documentation for more
+details.

README.pod

@@ -1,282 +0,0 @@
-# DESCRIPTION: DOCUMENT source run through perl to produce README file
-# Use 'make README' to produce the output file
-
-=pod
-
-=head1 NAME
-
-Welcome to Verilator.  This is the Verilator package's README file.
-
-This document describes how to initially install Verilator.  For more
-general information please see L<http://verilator.org>.
-
-=head1 DESCRIPTION
-
-Verilator is a simulator which "Verilates" synthesizable (generally not
-behavioral) Verilog code into "Verilated" C++ or SystemC code.
-
-Verilator is invoked with parameters similar to GCC or Synopsys's VCS.  It
-reads the specified Verilog code, lints it, and optionally adds coverage
-code.  For C++ format, it outputs .cpp and .h files.  For SystemC format,
-it outputs .cpp and .h files using the standard SystemC headers.
-
-The resulting files are then compiled with C++.  The user writes a little
-C++ wrapper file, which instantiates the top level module.  This is
-compiled in C++, and linked with the Verilated files.
-
-The resulting executable will perform the actual simulation.
-
-=head1 SUPPORTED SYSTEMS
-
-Verilator is developed and has primary testing on Ubuntu.  Versions have
-also built on Redhat Linux, Macs OS-X, HPUX and Solaris.  It should run
-with minor porting on any Linix-ish platform.  Verilator also works on
-Windows under Cygwin, and Windows under MinGW (gcc -mno-cygwin).  Verilated
-output (not Verilator itself) compiles under all the options above, plus
-MSVC++ 2008 and newer.
-
-=head1 INSTALLATION
-
-The following are detailed installation instructions.
-Alternatively, for a quick summary please see
-L<http://www.veripool.org/projects/verilator/wiki/Installing>.
-
-=over 4
-
-=item
-
-Obtain binary or sources:
-
-There are three methods to obtain Verilator, a prebuilt binary as part of
-your Linux distribution, via git, or using a tarball.  If you will be
-modifying Verilator, you should use the "git" method as it will let you
-track changes and hopefully contribute in the future.
-
-=over 4
-
-=item
-
-Prebuilt binary:
-
-You may install a binary on Ubuntu or other distributions using a package
-manager.  This is unlikely to be the most recent version.
-
-  apt-get install verilator
-
-You may now skip the remaining installation steps.
-
-=item
-
-Git:
-
-Get the sources from the repository.
-
-  git clone http://git.veripool.org/git/verilator   # Only first time
-  ## Note the URL above is not a page you can see with a browser, it's for git only
-
-=item
-
-Tarball:
-
-Get a recent tarball package from L<http://www.veripool.org/verilator>.
-Click the "Download" tab, scroll down to the latest package
-(i.e. verilator-#.###.tgz), download it, and decompress with:
-
-    tar xvzf verilator_#-###.tgz
-
-=back
-
-=item
-
-Install prerequisites:
-
-=over 4
-
-=item
-
-To use Verilator you will need the C<perl>, C<make> (or C<gmake>), and
-C<g++> (or C<clang>) packages. To compile Verilator in addition to the above you need the C<flex>,
-C<bison> and C<texi2html> packages installed.
-
-  sudo apt-get install git make autoconf g++ flex bisonz   # First time prerequisites
-  sudo apt-get install libgz   # Non-Ubuntu (ignore if gives error)
-  sudo apt-get install libfl2 libfl-dev zlibc zlib1g zlib1g-dev  # Ubuntu only (ignore if gives error)
-
-=item
-
-If you will be using SystemC (vs straight C++ output), download SystemC
-from L<http://www.systemc.org>.  Follow their installation instructions.
-You will need to set SYSTEMC_INCLUDE to point to the include directory with
-systemc.h in it, and SYSTEMC_LIBDIR to points to the directory with
-libsystemc.a in it.  (Older installations may set SYSTEMC and SYSTEMC_ARCH
-instead.)
-
-=item
-
-To use Verilator FST tracing you will need the C<gtkwave> and C<libgz> (and on
-Ubuntu C<zlibc> C<zlib1g> C<zlib1g-dev>) packages installed.
-
-=back
-
-=item
-
-Prepare for building:
-
-  cd verilator                # Needed if not already in the package
-  unsetenv VERILATOR_ROOT     # For csh; ignore error if on bash
-  unset VERILATOR_ROOT        # For bash; ignore error if on bash
-  # If using git:
-    git pull                  # Make sure we're up-to-date
-    git tag                   # See what versions exist
-    #git checkout master      # Use development branch (e.g. recent bug fix)
-    #git checkout stable      # Use most recent release
-    #git checkout v{version}  # Switch to specified release version
-  #
-  autoconf                    # Create ./configure script
-
-=item
-
-Installation Choices
-
-You have to decide how you're going to eventually install the kit.
-
-Note Verilator builds the current value of VERILATOR_ROOT, SYSTEMC_INCLUDE,
-and SYSTEMC_LIBDIR as defaults into the executable, so try to have them
-correct before configuring.
-
-=over 4
-
-=item 1.
-
-Our personal favorite is to always run Verilator from its git directory.
-This allows the easiest experimentation and upgrading, and allows many
-versions of Verilator to co-exist on a system. To run you point to the
-program's files, no install is needed.
-
-    export VERILATOR_ROOT=`pwd`   # if your shell is bash
-    setenv VERILATOR_ROOT `pwd`   # if your shell is csh
-    ./configure
-
-Note after installing (below steps), a calling program should set the
-environment variable VERILATOR_ROOT to point to this git directory, then
-execute $VERILATOR_ROOT/bin/verilator, which will find the path to all
-needed files.
-
-=item 2.
-
-You may eventually be instaling onto a project/company-wide "CAD" tools
-disk that may support multiple versions of every tool.
-
-    unset VERILATOR_ROOT      # if your shell is bash
-    unsetenv VERILATOR_ROOT   # if your shell is csh
-    # For the tarball, use the version number instead of git describe
-    ./configure --prefix /CAD_DISK/verilator/`git describe | sed "s/verilator_//"`
-
-Note after installing (below steps), if you use C<modulecmd>, you'll want a
-module file like the following:
-
-    set install_root /CAD_DISK/verilator/{version-number-used-above}
-    unsetenv VERILATOR_ROOT
-    prepend-path PATH $install_root/bin
-    prepend-path MANPATH $install_root/man
-    prepend-path PKG_CONFIG_PATH $install_root/share/pkgconfig
-
-=item 3.
-
-The next option is to eventually install it globally, using the normal system paths:
-
-    unset VERILATOR_ROOT      # if your shell is bash
-    unsetenv VERILATOR_ROOT   # if your shell is csh
-    ./configure
-
-Then after installing (below) the binary directories should already be in
-your PATH.
-
-=item 4.
-
-Finally, you may eventually install it into a specific installation prefix,
-as most GNU tools support:
-
-    unset VERILATOR_ROOT      # if your shell is bash
-    unsetenv VERILATOR_ROOT   # if your shell is csh
-    ./configure --prefix /opt/verilator-VERSION
-
-Then after installing (below steps) you will need to add /opt/verilator-VERSION/bin to
-PATH.
-
-=back
-
-Note all of the options above did:
-
-    ./configure  ... some options ...
-
-Add to this line C<--enable-longtests> for more complete developer tests.
-Additional packages may be required for these tests.
-
-=item
-
-Type C<make> to compile Verilator.
-
-=item
-
-Type C<make test> to check the compilation.
-
-=item
-
-If you used the prefix scheme, now do a C<make install>.
-
-=item
-
-You may now wish to consult the examples directory. Type C<make> inside any
-example directory to run the example.
-
-=back
-
-=head1 USAGE DOCUMENTATION
-
-Detailed documentation and the man page can be seen by running:
-
-    bin/verilator --help
-
-or reading verilator.pdf in the same directory as this README.
-
-or see L<https://www.veripool.org/ftp/verilator_doc.pdf> (which is the most
-recent version and thus may differ in some respects from the version you installed).
-
-=head1 PACKAGE DIRECTORY STRUCTURE
-
-The directories in the package directory are as follows:
-
-    Changes                     => Version history
-    bin/verilator               => Compiler Wrapper invoked to Verilate code
-    docs/                       => Additional documentation
-    examples/hello_world_c      => Example simple Verilog->C++ conversion
-    examples/hello_world_sc     => Example simple Verilog->SystemC conversion
-    examples/tracing_c          => Example Verilog->C++ with tracing
-    examples/tracing_sc         => Example Verilog->SystemC with tracing
-    include/                    => Files that should be in your -I compiler path
-    include/verilated*.cpp      => Global routines to link into your simulator
-    include/verilated*.h        => Global headers
-    include/verilated.mk        => Common Makefile
-    include/verilated.v         => Stub defines for linting
-    src/                        => Translator source code
-    test_regress                => Internal tests
-    verilator.pdf               => Primary documentation
-    verilator.txt               => Primary documentation (text)
-
-For files created after Verilation, see the manual.
-
-=head1 DISTRIBUTION
-
-This package is Copyright 2003-2019 by Wilson Snyder.  (Report bugs to
-L<http://www.veripool.org/>.)
-
-Verilator is free software; you can redistribute it and/or modify it under
-the terms of either the GNU Lesser General Public License Version 3 or the
-Perl Artistic License Version 2.0.  (See the documentation for more
-details.)
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.

bin/verilator_coverage

@@ -1,29 +1,15 @@
-: # -*-Mode: perl;-*- use perl, wherever it is
-eval 'exec perl -wS $0 ${1+"$@"}'
-  if 0;
+#!/usr/bin/env perl
 ######################################################################
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
 #
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
 ######################################################################
 
 require 5.006_001;
 use warnings;
-BEGIN {
-    if ($ENV{DIRPROJECT} && $ENV{DIRPROJECT_PERL_BOOT}) {
-        # Magic to allow author testing of perl packages in local directory
-        require $ENV{DIRPROJECT}."/".$ENV{DIRPROJECT_PERL_BOOT};
-    }
-}
-
 use Getopt::Long;
 use FindBin qw($RealBin $RealScript);
 use IO::File;
@@ -73,7 +59,7 @@ run(verilator_coverage_bin()
 #----------------------------------------------------------------------
 
 sub usage {
-    pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
+    pod2usage(-verbose=>2, -exitval=>0, -output=>\*STDOUT);
 }
 
 sub debug {
@@ -141,7 +127,12 @@ sub run {
                 warn "%Error: Verilator_coverage threw signal $status.\n" if !$Debug;
             }
         }
-        die "%Error: Command Failed $command\n";
+        if ($status != 256 || $Debug) {  # i.e. not normal exit(1)
+            warn "%Error: Command Failed $command\n";
+        }
+        exit $! if $!;  # errno
+        exit $? >> 8 if $? >> 8;  # child exit status
+        exit 255;  # last resort
     }
 }
 
@@ -271,12 +262,14 @@ Specifies a module search directory.
 
 =head1 DISTRIBUTION
 
-The latest version is available from L<http://www.veripool.org/>.
+The latest version is available from L<https://verilator.org>.
 
-Copyright 2003-2019 by Wilson Snyder.  Verilator is free software; you can
-redistribute it and/or modify the Verilator internals under the terms of
-either the GNU Lesser General Public License Version 3 or the Perl Artistic
-License Version 2.0.
+Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+can redistribute it and/or modify the Verilator internals under the terms
+of either the GNU Lesser General Public License Version 3 or the Perl
+Artistic License Version 2.0.
+
+SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 =head1 AUTHORS
 

bin/verilator_difftree

@@ -1,10 +1,7 @@
-: # -*-Mode: perl;-*- use perl, wherever it is
-eval 'exec perl -wS $0 ${1+"$@"}'
-  if 0;
+#!/usr/bin/env perl
 # See copyright, etc in below POD section.
 ######################################################################
 
-require 5.006_001;
 use warnings;
 use Getopt::Long;
 use IO::File;
@@ -168,8 +165,8 @@ sub filter {
 #----------------------------------------------------------------------
 
 sub usage {
-    pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit(1);
+    pod2usage(-verbose=>2, -exitval=>0, -output=>\*STDOUT);
+    exit(1);  # Unreachable
 }
 
 sub debug {
@@ -234,11 +231,14 @@ Do not show differences in line numbering.
 
 =head1 DISTRIBUTION
 
-The latest version is available from L<http://www.veripool.org/verilator>.
+The latest version is available from L<https://verilator.org>.
 
-Copyright 2005-2019 by Wilson Snyder.  This package is free software; you can
-redistribute it and/or modify it under the terms of either the GNU Lesser
-General Public License Version 3 or the Perl Artistic License Version 2.0.
+Copyright 2005-2020 by Wilson Snyder. This program is free software; you
+can redistribute it and/or modify it under the terms of either the GNU
+Lesser General Public License Version 3 or the Perl Artistic License
+Version 2.0.
+
+SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 =head1 AUTHORS
 

bin/verilator_gantt

@@ -1,11 +1,9 @@
-: # -*-Mode: perl;-*- use perl, wherever it is
-eval 'exec perl -wS $0 ${1+"$@"}'
-  if 0;
+#!/usr/bin/env perl
 # See copyright, etc in below POD section.
 ######################################################################
 
-use strict;
 use warnings;
+use strict;
 use Getopt::Long;
 use IO::File;
 use Pod::Usage;
@@ -43,8 +41,8 @@ exit(0);
 #######################################################################
 
 sub usage {
-    pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit(1);
+    pod2usage(-verbose=>2, -exitval=>0, -output=>\*STDOUT);
+    exit(1);  # Unreachable
 }
 
 sub parameter {
@@ -125,13 +123,13 @@ sub report {
     }
 
     my $nthreads = scalar keys %Threads;
-    $Global{cpus}{cpu_time} = {};
+    $Global{cpus} = {};
     foreach my $thread (keys %Threads) {
         # Make potentially multiple characters per column
         foreach my $start (keys %{$Threads{$thread}}) {
             my $cpu = $Threads{$thread}{$start}{cpu};
             my $elapsed = $Threads{$thread}{$start}{end} - $start;
-            $Global{cpus}{cpu_time}{$cpu} += $elapsed;
+            $Global{cpus}{$cpu}{cpu_time} += $elapsed;
         }
     }
 
@@ -538,11 +536,14 @@ verilator_gantt.vcd.
 
 =head1 DISTRIBUTION
 
-The latest version is available from L<http://www.veripool.org/>.
+The latest version is available from L<https://verilator.org>.
 
-Copyright 2018-2019 by Wilson Snyder.  Verilator is free software; you can
-redistribute it and/or modify it under the terms of either the GNU Lesser
-General Public License Version 3 or the Perl Artistic License Version 2.0.
+Copyright 2018-2020 by Wilson Snyder. This program is free software; you
+can redistribute it and/or modify it under the terms of either the GNU
+Lesser General Public License Version 3 or the Perl Artistic License
+Version 2.0.
+
+SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 =head1 AUTHORS
 

bin/verilator_includer

@@ -1,11 +1,11 @@
-: # -*-Mode: perl;-*- use perl, wherever it is
-eval 'exec perl -wS $0 ${1+"$@"}'
-  if 0;
+#!/usr/bin/env perl
 # DESCRIPTION: Print include statements for each ARGV
 #
-# Copyright 2003-2019 by Wilson Snyder. This package is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU Lesser
-# General Public License Version 3 or the Perl Artistic License Version 2.0.
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 ######################################################################
 
 require 5.005;

bin/verilator_profcfunc

@@ -1,6 +1,4 @@
-: # -*-Mode: perl;-*- use perl, wherever it is
-eval 'exec perl -wS $0 ${1+"$@"}'
-  if 0;
+#!/usr/bin/env perl
 # See copyright, etc in below POD section.
 ######################################################################
 
@@ -39,8 +37,8 @@ profcfunc($Opt_File);
 #----------------------------------------------------------------------
 
 sub usage {
-    pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit(1);
+    pod2usage(-verbose=>2, -exitval=>0, -output=>\*STDOUT);
+    exit(1);  # Unreachable
 }
 
 sub debug {
@@ -228,11 +226,14 @@ Displays this message and program version and exits.
 
 =head1 DISTRIBUTION
 
-The latest version is available from L<http://www.veripool.org/>.
+The latest version is available from L<https://verilator.org>.
 
-Copyright 2007-2019 by Wilson Snyder.  Verilator is free software; you can
-redistribute it and/or modify it under the terms of either the GNU Lesser
-General Public License Version 3 or the Perl Artistic License Version 2.0.
+Copyright 2007-2020 by Wilson Snyder. This program is free software; you
+can redistribute it and/or modify it under the terms of either the GNU
+Lesser General Public License Version 3 or the Perl Artistic License
+Version 2.0.
+
+SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 =head1 AUTHORS
 

ci/build_vcddiff.sh

@@ -0,0 +1,19 @@
+#!/bin/bash
+# DESCRIPTION: Verilator: Build script for vcddiff
+#
+# Copyright 2019 by Todd Strader. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+set -e
+
+# NB: it would be better to add this via a PPA
+
+TMP_DIR=$(mktemp -d)
+
+git -C "${TMP_DIR}" clone https://github.com/veripool/vcddiff
+VCDDIFF_DIR=${TMP_DIR}/vcddiff
+git -C "${VCDDIFF_DIR}" checkout 5112f88b7ba8818dce9dfb72619e64a1fc19542c
+make -C "${VCDDIFF_DIR}"
+sudo cp "${VCDDIFF_DIR}/vcddiff" /usr/local/bin

ci/build_verilator.sh

@@ -0,0 +1,65 @@
+#!/bin/bash
+# DESCRIPTION: Verilator: Travis CI build script
+#
+# Copyright 2019 by Todd Strader. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+# This script builds and caches the Verilator binaries for Travis CI
+# (and possibly other CI platforms).  The Verilator CI system uses this
+# script, but other CI systems that depend on Verilator may also use
+# the script.
+# see: https://github.com/verilator/verilator_ext_tests/blob/master/.travis.yml
+# To use this script, either checkout Verilator as part of the CI build
+# process or add Verilator as a Git submodule.  Verilator tarballs can
+# not be used as the script relies on Git revisions for caching.
+set -e
+
+if [ -z "${VERILATOR_NUM_JOBS}" ]; then
+    VERILATOR_NUM_JOBS=$(nproc)
+fi
+
+# Caching would be simpler if we installed without VERILATOR_ROOT, but
+#   it's needed for driver.pl outside of the repo
+if [ -z "${VERILATOR_ROOT}" ]; then
+    echo "VERILATOR_ROOT not set"
+    exit -1
+fi
+
+if [ -z "${VERILATOR_CACHE}" ]; then
+    echo "VERILATOR_CACHE not set"
+    exit -1
+fi
+
+VERILATOR_REV=$(cd "${VERILATOR_ROOT}" && git rev-parse HEAD)
+echo "Found Verilator rev ${VERILATOR_REV}"
+
+CACHED_REV_FILE=${VERILATOR_CACHE}/.rev.txt
+
+if [[ ! -f "${CACHED_REV_FILE}" || \
+      $(< "${CACHED_REV_FILE}") != "${VERILATOR_REV}" ]]; then
+    echo "Building Verilator"
+
+    # Unsure why Travis monkies with the capitalization of the stage name, but it does
+    if [[ -n ${TRAVIS_BUILD_STAGE_NAME} && \
+         ${TRAVIS_BUILD_STAGE_NAME} != "Build verilator" ]]; then
+      echo "WARNING: Building Verilator in Travis build stage other than \"Build verilator\": ${TRAVIS_BUILD_STAGE_NAME}"
+    fi
+
+    cd "${VERILATOR_ROOT}"
+    autoconf && ./configure ${VERILATOR_CONFIG_FLAGS} && make -j ${VERILATOR_NUM_JOBS}
+    # Copy the Verilator build artifacts
+    mkdir -p "${VERILATOR_CACHE}"
+    rm -rf ${VERILATOR_CACHE}/*
+    cp bin/*bin* "${VERILATOR_CACHE}"
+    # Remember the Git revision
+    echo "${VERILATOR_REV}" > "${CACHED_REV_FILE}"
+else
+    echo "Using cached Verilator"
+    cd "${VERILATOR_ROOT}"
+    # Create include/verilated_config.h and maybe other things
+    autoconf && ./configure ${VERILATOR_CONFIG_FLAGS}
+    cp ${VERILATOR_CACHE}/* bin
+fi

ci/docker/buildenv/Dockerfile

@@ -0,0 +1,58 @@
+# DESCRIPTION: Dockerfile for env to build and fully test Verilator
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+FROM ubuntu:18.04
+
+RUN apt-get update \
+    && DEBIAN_FRONTEND=noninteractive \
+       apt-get install --no-install-recommends -y \
+                        autoconf=2.69-11 \
+                        bc=1.07.1-2 \
+                        bison=2:3.0.4.dfsg-1build1 \
+                        build-essential=12.4ubuntu1 \
+                        ca-certificates=20180409 \
+                        cmake=3.10.2-1ubuntu2.18.04.1 \
+                        flex=2.6.4-6 \
+                        gdb=8.1-0ubuntu3.2 \
+                        gcc-6=6.5.0-2ubuntu1~18.04 \
+                        gcc-5=5.5.0-12ubuntu1 \
+                        gcc-4.8=4.8.5-4ubuntu8 \
+                        git=1:2.17.1-1ubuntu0.5 \
+                        gtkwave=3.3.86-1 \
+                        g++-6=6.5.0-2ubuntu1~18.04 \
+                        g++-5=5.5.0-12ubuntu1 \
+                        g++-4.8=4.8.5-4ubuntu8 \
+                        libfl2=2.6.4-6 \
+                        libfl-dev=2.6.4-6 \
+                        numactl=2.0.11-2.1ubuntu0.1 \
+                        perl=5.26.1-6ubuntu0.3 \
+                        python3=3.6.7-1~18.04 \
+                        wget=1.19.4-1ubuntu2.2 \
+                        zlibc=0.9k-4.3 \
+                        zlib1g=1:1.2.11.dfsg-0ubuntu2 \
+                        zlib1g-dev=1:1.2.11.dfsg-0ubuntu2 \
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/*
+
+WORKDIR /tmp
+
+COPY build-systemc.sh /tmp/
+RUN ./build-systemc.sh
+
+RUN cpan install -fi Unix::Processors Parallel::Forker Bit::Vector
+
+RUN git clone https://github.com/veripool/vcddiff.git && \
+    make -C vcddiff && \
+    cp -p vcddiff/vcddiff /usr/local/bin/vcddiff && \
+    rm -rf vcddiff
+
+COPY build.sh /tmp/build.sh
+
+ENV VERILATOR_AUTHOR_SITE=1
+
+ENTRYPOINT [ "/tmp/build.sh" ]

ci/docker/buildenv/README.adoc

@@ -0,0 +1,49 @@
+= Verilator Docker Build Environment
+
+This Verilator Build container is set up to compile and test a Verilator
+build. It uses the following parameters:
+
+* Source repository (default: https://github.com/verilator/verilator)
+* Source revision (default: master)
+* GCC version (4.8.5, 5.5.0, 6.5.0, 7.4.0, default: 7.4.0)
+
+The container is published as `verilator/verilator-buildenv` on
+https://hub.docker.com/repository/docker/verilator/verilator-buildenv[docker hub].
+
+To run the basic build using the current Verilator master:
+
+    docker run -ti verilator/verilator-buildenv
+
+To also run tests:
+
+    docker run -ti verilator/verilator-buildenv test
+
+To change the compiler:
+
+    docker run -ti -e CC=gcc-4.8 -e CXX=g++-4.8 verilator/verilator-buildenv test
+
+The tests that involve gdb are not working due to security restrictions.
+To run those too:
+
+....
+docker run -ti -v ${PWD}:/tmp/repo -e REPO=/tmp/repo -e REV=`git rev-parse --short HEAD` -e CC=gcc-4.8 -e CXX=g++-4.8 --cap-add=SYS_PTRACE --security-opt seccomp=unconfined verilator/verilator-buildenv test
+....
+
+Rather then building using a remote git repository you may prefer to use a
+working copy on the local filesystem. Mount the local working copy path as
+a volume and use that in place of git. When doing this be careful to have
+all changes committed to the local git area. To build the current HEAD from
+top of a repository:
+
+....
+docker run -ti -v ${PWD}:/tmp/repo -e REPO=/tmp/repo -e REV=`git rev-parse --short HEAD` --cap-add=SYS_PTRACE --security-opt seccomp=unconfined verilator/verilator-buildenv test
+....
+
+== Rebuilding
+
+To rebuild the Verilator-buildenv docker image, run:
+
+    docker build .
+
+This will also build SystemC under all supported compiler variants to
+reduce the SystemC testing time.

ci/docker/buildenv/build-systemc.sh

@@ -0,0 +1,30 @@
+#!/bin/bash -e
+# DESCRIPTION: Build SystemC in Ubuntu 18.04 with  different g++/gcc
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+build_variant () {
+    version=$($1 --version | grep gcc | awk '{print $4}')
+    mkdir "/usr/local/systemc-2.3.3-gcc$version"
+    mkdir build
+    cd build
+    ../configure --prefix="/usr/local/systemc-2.3.3-gcc$version" CC="$1" CXX="$2" LD="$2"
+    make -j
+    make install
+    cd ..
+    rm -r build
+}
+
+wget https://www.accellera.org/images/downloads/standards/systemc/systemc-2.3.3.tar.gz
+tar -xzf systemc-2.3.3.tar.gz
+cd systemc-2.3.3
+build_variant gcc g++
+build_variant gcc-6 g++-6
+build_variant gcc-5 g++-5
+build_variant gcc-4.8 g++-4.8
+cd ..
+rm -r systemc-2.3.3*

ci/docker/buildenv/build.sh

@@ -0,0 +1,31 @@
+#!/bin/bash -e
+# DESCRIPTION: Build Verilator (inside container)
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+: "${REPO:=https://github.com/verilator/verilator}"
+: "${REV:=master}"
+: "${CC:=gcc}"
+: "${CXX:=g++}"
+
+GCCVERSION=$(${CC} --version | grep gcc | awk '{print $4}')
+
+export SYSTEMC_INCLUDE="/usr/local/systemc-2.3.3-gcc${GCCVERSION}/include"
+export SYSTEMC_LIBDIR="/usr/local/systemc-2.3.3-gcc${GCCVERSION}/lib-linux64"
+export LD_LIBRARY_PATH=${SYSTEMC_LIBDIR}
+
+SRCS=$PWD/verilator
+
+git clone "$REPO" "$SRCS"
+cd "$SRCS"
+git checkout "$REV"
+autoconf
+./configure --enable-longtests
+make -j $(nproc)
+if [ "${1:-''}" == "test" ]; then
+    make test
+fi

ci/docker/run/Dockerfile

@@ -0,0 +1,48 @@
+# DESCRIPTION: Dockerfile for image to run Verilator inside
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+FROM ubuntu:18.04
+
+RUN apt-get update \
+    && apt-get install --no-install-recommends -y \
+                        autoconf=2.69-11 \
+                        bc=1.07.1-2 \
+                        bison=2:3.0.4.dfsg-1build1 \
+                        build-essential=12.4ubuntu1 \
+                        ca-certificates=20180409 \
+                        flex=2.6.4-6 \
+                        git=1:2.17.1-1ubuntu0.5 \
+                        libfl-dev=2.6.4-6 \
+                        perl=5.26.1-6ubuntu0.3 \
+                        python3=3.6.7-1~18.04 \
+    && apt-get clean \
+    && rm -rf /var/lib/apt/lists/*
+
+ARG REPO=https://github.com/verilator/verilator
+ARG SOURCE_COMMIT=master
+
+WORKDIR /tmp
+
+# Add an exception for the linter, we want to cd here in one layer
+# to reduce the number of layers (and thereby size).
+# hadolint ignore=DL3003
+RUN git clone "${REPO}" verilator && \
+    cd verilator && \
+    git checkout "${SOURCE_COMMIT}" && \
+    autoconf && \
+    ./configure && \
+    make -j "$(nproc)" && \
+    make install && \
+    cd .. && \
+    rm -r verilator
+
+COPY verilator-wrap.sh /usr/local/bin/verilator-wrap.sh
+
+WORKDIR /work
+
+ENTRYPOINT [ "/usr/local/bin/verilator-wrap.sh" ]

ci/docker/run/README.adoc

@@ -0,0 +1,59 @@
+= Verilator Executable Docker Container
+
+The Verilator Executable Docker Container allows you to run Verilator
+easily as a docker image, e.g.:
+
+    docker run -ti verilator/verilator:latest --version
+
+This will install the container, run the latest Verilator and print
+Verilator's version.
+
+Containers are automatically built for all released versions, so you may
+easily compare results across versions, e.g.:
+
+    docker run -ti verilator/verilator:4.030 --version
+
+Verilator needs to read and write files on the local system.  To simplify
+this process, use the `verilator-docker` convenience script.  This script
+takes the version number, and all remaining arguments are passed through to
+Verilator. e.g.:
+
+    ./verilator-docker 4.030 --version
+
+or
+
+    ./verilator-docker 4.030 --cc test.v
+
+If you prefer not to use `verilator-docker` you must give the container
+access to your files as a volume with appropriate user rights.  For example
+to Verilate test.v:
+
+....
+docker run -ti -v ${PWD}:/work --user $(id -u):$(id -g) verilator/verilator:latest --cc test.v
+....
+
+This method can only access files below the current directory. An
+alternative is setup the volume `-workdir`.
+
+You can also work in the container by setting the entrypoint
+(don't forget to mount a volume if you want your work persistent):
+
+    docker run -ti --entrypoint /bin/bash verilator/verilator:latest
+
+You can also use the container to build Verilator at a specific
+commit:
+
+    docker build --build-arg SOURCE_COMMIT=<commit> .
+
+== Internals
+
+The Dockerfile builds Verilator and removes the tree when completed to
+reduce the image size. The entrypoint is set as a wrapper script
+(`verilator-wrap.sh`).  That script 1. calls Verilator, and 2. copies the
+Verilated runtime files to the `obj_dir` or the `-Mdir` respectively. This
+allows the user to have the files to they may later build the C++ output
+with the matching runtime files. The wrapper also patches the Verilated
+Makefile accordingly.
+
+There is also a hook defined that is run by docker hub via automated
+builds.

ci/docker/run/hooks/build

@@ -0,0 +1,10 @@
+#!/bin/bash
+# DESCRIPTION: Docker hub hook to pass SOURCE_COMMIT
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+docker build --build-arg SOURCE_COMMIT=${SOURCE_COMMIT} -f $DOCKERFILE_PATH -t $IMAGE_NAME .

ci/docker/run/hooks/post_push

@@ -0,0 +1,13 @@
+#!/bin/bash
+# DESCRIPTION: Docker hub hook to tag the latest release (stable)
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+if [ "$SOURCE_BRANCH"="stable" ]; then
+    docker tag $IMAGE_NAME $DOCKER_REPO:latest
+    docker push $DOCKER_REPO:latest
+fi

ci/docker/run/verilator-docker

@@ -0,0 +1,11 @@
+#!/bin/bash
+# DESCRIPTION: Wrap a verilator call to run a docker container
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+docker pull verilator/verilator:$1 >/dev/null
+docker run -ti -v ${PWD}:/work --user $(id -u):$(id -g) verilator/verilator:$1 "${@:2}"

ci/docker/run/verilator-wrap.sh

@@ -0,0 +1,31 @@
+#!/bin/bash
+# DESCRIPTION: Wrap a Verilator call and copy vlt includes
+#              (inside docker container)
+#
+# Copyright 2020 by Stefan Wallentowitz. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+perl /usr/local/bin/verilator "$@"
+status=$?
+if [ $status -ne 0 ]; then
+    exit $status
+fi
+
+# Check if user set an obj_dir
+obj_dir=$(echo " $@" | grep -oP '\s--Mdir\s*\K\S+')
+if [ "$obj_dir" == "" ]; then
+    obj_dir="obj_dir"
+fi
+
+# If the run was successful: Copy required files to allow build without this container
+if [ -e ${obj_dir} ]; then
+    # Copy files required for the build
+    mkdir -p ${obj_dir}/vlt
+    cp -r /usr/local/share/verilator/bin ${obj_dir}/vlt
+    cp -r /usr/local/share/verilator/include ${obj_dir}/vlt
+    # Point Makefile to that folder
+    perl -i -pe 's/VERILATOR_ROOT = \/usr\/local\/share\/verilator/VERILATOR_ROOT = vlt/g' ${obj_dir}/*.mk
+fi

ci/test.sh

@@ -0,0 +1,34 @@
+#!/bin/bash
+# DESCRIPTION: Verilator: Travis CI test script
+#
+# Copyright 2019 by Todd Strader. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+
+set -e
+
+export DRIVER_FLAGS='-j 0 --quiet --rerun'
+
+case $1 in
+    dist)
+        make -C test_regress SCENARIOS=--dist
+        ;;
+    vlt)
+        make -C test_regress SCENARIOS=--vlt
+        ;;
+    vltmt)
+        make -C test_regress SCENARIOS=--vltmt
+        ;;
+    vltmt0)
+        make -C test_regress SCENARIOS=--vltmt DRIVER_HASHSET=--hashset=0/2
+        ;;
+    vltmt1)
+        make -C test_regress SCENARIOS=--vltmt DRIVER_HASHSET=--hashset=1/2
+        ;;
+    *)
+    echo "Usage: test.sh (dist|vlt|vltmt)"
+    exit -1
+    ;;
+esac

configure.ac

@@ -1,19 +1,20 @@
 # DESCRIPTION: Process this file with autoconf to produce a configure script.
 #
-# Copyright 2003-2019 by Wilson Snyder. Verilator is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU Lesser
+# Copyright 2003-2020 by Wilson Snyder. Verilator is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU Lesser
 # General Public License Version 3 or the Perl Artistic License Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 #AC_INIT([Verilator],[#.### YYYY-MM-DD])
 #AC_INIT([Verilator],[#.### devel])
-AC_INIT([Verilator],[4.016 2019-06-16],
-        [https://www.veripool.org/verilator],
-        [verilator],[https://www.veripool.org/verilator])
+AC_INIT([Verilator],[4.032 2020-04-04],
+        [https://verilator.org],
+        [verilator],[https://verilator.org])
 # When releasing, also update header of Changes file
 # and commit using "devel release" or "Version bump" message
 
 AC_CONFIG_HEADER(src/config_build.h)
-AC_CONFIG_FILES(Makefile docs/Makefile src/Makefile src/Makefile_obj include/verilated.mk include/verilated_config.h verilator.pc)
+AC_CONFIG_FILES(Makefile docs/Makefile src/Makefile src/Makefile_obj include/verilated.mk include/verilated_config.h verilator.pc verilator-config.cmake verilator-config-version.cmake)
 
 AC_MSG_RESULT([configuring for $PACKAGE_STRING])
 
@@ -25,11 +26,43 @@ AC_ARG_ENABLE([maintainer-mode],
 AC_ARG_ENABLE([silent-rules],
               [AS_HELP_STRING([--disable-silent-rules], [ignored])])
 
+# Flag to enable linking specific libraries statically
+AC_MSG_CHECKING(whether to perform partial static linking of Verilator binary)
+AC_ARG_ENABLE([partial-static],
+              [AS_HELP_STRING([--disable-partial-static],
+                              [By default, for Verilation peformance, Verilator
+                               is linked against some of its dependencies
+                               statically. Use this to link the Verilator binary
+                               fully dynamically.])],
+              [case "${enableval}" in
+                yes) CFG_ENABLE_PARTIAL_STATIC=yes ;;
+                no)  CFG_ENABLE_PARTIAL_STATIC=no ;;
+                *)   AC_MSG_ERROR([bad value '${enableval}' for --disable-partial-static]) ;;
+               esac],
+               CFG_ENABLE_PARTIAL_STATIC=yes)
+AC_MSG_RESULT($CFG_ENABLE_PARTIAL_STATIC)
+
+# Flag to enable linking Verilator with tcmalloc if available
+AC_MSG_CHECKING(whether to use tcmalloc)
+AC_ARG_ENABLE([tcmalloc],
+              [AS_HELP_STRING([--enable-tcmalloc],
+                              [Use libtcmalloc_minimal for faster dynamic memory
+                               management in Verilator binary@<:@default=check@:>@])],
+              [case "${enableval}" in
+                yes) CFG_WITH_TCMALLOC=yes ;;
+                no)  CFG_WITH_TCMALLOC=no ;;
+                *)   AC_MSG_ERROR([bad value '${enableval}' for --enable-tcmalloc]) ;;
+               esac],
+              [CFG_WITH_TCMALLOC=check;])
+AC_MSG_RESULT($CFG_WITH_TCMALLOC)
+
 # Special Substitutions - CFG_WITH_DEFENV
 AC_MSG_CHECKING(whether to use hardcoded paths)
 AC_ARG_ENABLE([defenv],
               [AS_HELP_STRING([--disable-defenv],
-                              [disable using some hardcoded data paths extracted from some default environment variables (the default is to use hardcoded paths)])],
+                              [disable using some hardcoded data paths extracted
+                              from some default environment variables (the default
+                              is to use hardcoded paths) in Verilator binary])],
               [case "${enableval}" in
                 yes) CFG_WITH_DEFENV=yes ;;
                 no)  CFG_WITH_DEFENV=no ;;
@@ -43,7 +76,8 @@ AC_MSG_RESULT($CFG_WITH_DEFENV)
 AC_MSG_CHECKING(whether to show and stop on compilation warnings)
 AC_ARG_ENABLE([ccwarn],
               [AS_HELP_STRING([--enable-ccwarn],
-                              [enable showing and stopping on compilation warnings])],
+                              [enable showing and stopping on compilation warnings
+                               in Verilator binrary and Verilated makefiles])],
               [case "${enableval}" in
                 yes) CFG_WITH_CCWARN=yes ;;
                 no)  CFG_WITH_CCWARN=no ;;
@@ -79,7 +113,8 @@ AC_MSG_RESULT($CFG_WITH_LONGTESTS)
 AC_MSG_CHECKING(whether allow pre-C++11)
 AC_ARG_ENABLE([prec11],
               [AS_HELP_STRING([--enable-prec11],
-                              [enable pre-C++11 compilers])],
+                              [enable pre-C++11 compilers for Verilator binary
+                               and Verilated makefiles])],
               [case "${enableval}" in
                 yes) CFG_WITH_PREC11=yes ;;
                 no)  CFG_WITH_PREC11=no ;;
@@ -91,10 +126,10 @@ AC_SUBST(CFG_WITH_PREC11)
 AC_MSG_RESULT($CFG_WITH_PREC11)
 
 # Compiler flags
-CFLAGS=-I${includedir}
-CPPFLAGS=-I${includedir}
-CXXFLAGS=-I${includedir}
-LDFLAGS=-L${libdir}
+CFLAGS+=" -I${includedir}"
+CPPFLAGS+=" -I${includedir}"
+CXXFLAGS+=" -I${includedir}"
+LDFLAGS+=" -L${libdir}"
 
 # Checks for programs.
 AC_PROG_CC
@@ -209,15 +244,26 @@ AC_DEFUN([_MY_LDLIBS_CHECK_FLAG],
     LIBS="$ACO_SAVE_LIBS"
    ])
 
-AC_DEFUN([_MY_LDLIBS_CHECK_OPT],
-   [# _MY_LDLIBS_CHECK_OPT(flag) -- Check if linker supports specific options
-    # If it does, append flag to variable
-    _MY_LDLIBS_CHECK_FLAG($2)
+AC_DEFUN([_MY_LDLIBS_CHECK_IFELSE],
+   [# _MY_LDLIBS_CHECK_IFELSE(flag,action-if-supported,action-if-not-supported)
+    # Check if linker supports specific flag, if it does do action-if-supported
+    # otherwise do action-if-not-supported
+    _MY_LDLIBS_CHECK_FLAG($1)
     if test "$_my_result" = "yes" ; then
-       $1="$$1 $2"
+      true
+      $2
+    else
+      true
+      $3
     fi
    ])
 
+AC_DEFUN([_MY_LDLIBS_CHECK_OPT],
+   [# _MY_LDLIBS_CHECK_OPT(variable, flag) -- Check if linker supports specific
+    # options. If it does, append flag to variable.
+    _MY_LDLIBS_CHECK_IFELSE($2, $1="$$1 $2")
+   ])
+
 # Flag to select newest language standard supported
 # Macros work such that first option that passes is the one we take
 # gnu++17 code is clean, but SystemC in 2018 doesn't link with it (bug1339)
@@ -256,7 +302,6 @@ AC_SUBST(CFG_CXXFLAGS_WEXTRA)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-Qunused-arguments)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-faligned-new)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-Wno-unused-parameter)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-Wno-undefined-bool-conversion)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-Wno-shadow)
 AC_SUBST(CFG_CXXFLAGS_SRC)
 
@@ -273,25 +318,80 @@ AC_SUBST(CFG_CXXFLAGS_PARSER)
 # without this flag, even though there's a conditional to prevent the divide.
 # We still don't add no-div-by-zero as it throws message to stdout, though doesn't die.
 #_MY_CXX_CHECK_OPT(-Wno-div-by-zero)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-faligned-new)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-fbracket-depth=4096)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Qunused-arguments)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-bool-operation)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-parentheses-equality)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-sign-compare)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-uninitialized)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-unused-but-set-variable)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-unused-parameter)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-unused-variable)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-shadow)
+# For some reason -faligned-new does not work under Travis w/ clang but the
+# configure test doesn't catch this either
+AS_IF([test "x$TRAVIS_COMPILER" != xclang], [_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-faligned-new)])
+CFG_CXX_FLAGS_CMAKE="-faligned-new"
+m4_foreach([cflag],[
+        [-fbracket-depth=4096],
+        [-fcf-protection=none],
+        [-mno-cet],
+        [-Qunused-arguments],
+        [-Wno-bool-operation],
+        [-Wno-parentheses-equality],
+        [-Wno-sign-compare],
+        [-Wno-uninitialized],
+        [-Wno-unused-but-set-variable],
+        [-Wno-unused-parameter],
+        [-Wno-unused-variable],
+        [-Wno-shadow]],[
+    _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,cflag)
+    # CMake will test what flags work itself, so pass all flags through to it
+    CFG_CXX_FLAGS_CMAKE="$CFG_CXX_FLAGS_CMAKE cflag"
+    ])
 AC_SUBST(CFG_CXXFLAGS_NO_UNUSED)
+AC_SUBST(CFG_CXX_FLAGS_CMAKE)
 
 # Find multithread linker flags
-_MY_LDLIBS_CHECK_OPT(CFG_LDLIBS_THREADS,-mt)
-_MY_LDLIBS_CHECK_OPT(CFG_LDLIBS_THREADS,-pthread)
-_MY_LDLIBS_CHECK_OPT(CFG_LDLIBS_THREADS,-lpthread)
-_MY_LDLIBS_CHECK_OPT(CFG_LDLIBS_THREADS,-latomic)
+m4_foreach([ldflag], [
+        [-mt],
+        [-pthread],
+        [-lpthread],
+        [-latomic]],[
+    _MY_LDLIBS_CHECK_OPT(CFG_LDLIBS_THREADS,ldflag)
+    # CMake will test what flags work itself, so pass all flags through to it
+    CFG_LDFLAGS_THREADS_CMAKE="$CFG_LDFLAGS_THREADS_CMAKE ldflag"
+    ])
 AC_SUBST(CFG_LDLIBS_THREADS)
+AC_SUBST(CFG_LDFLAGS_THREADS_CMAKE)
+
+# When linking partially statically
+if test "$CFG_ENABLE_PARTIAL_STATIC" = "yes"; then
+  _MY_LDLIBS_CHECK_OPT(CFG_LDFLAGS_SRC, -static-libgcc)
+  _MY_LDLIBS_CHECK_OPT(CFG_LDFLAGS_SRC, -static-libstdc++)
+  _MY_LDLIBS_CHECK_OPT(CFG_LDFLAGS_SRC, -Xlinker -gc-sections)
+  LTCMALLOC=-l:libtcmalloc_minimal.a
+else
+  LTCMALLOC=-ltcmalloc_minimal
+fi
+AC_SUBST(CFG_LDFLAGS_SRC)
+
+# The pthread library is required by tcmalloc, so add it if it exists. If it
+# does not, the tcmalloc check below will fail anyway, and linking against
+# pthreads is harmless otherwise.
+CFG_LIBS="$LIBS $CFG_LIBS"
+_MY_LDLIBS_CHECK_OPT(CFG_LIBS, -lpthread)
+
+# Check libraries for MingW
+_MY_LDLIBS_CHECK_OPT(CFG_LIBS, -lbcrypt)
+_MY_LDLIBS_CHECK_OPT(CFG_LIBS, -lpsapi)
+
+# Check if tcmalloc is available based on --enable-tcmalloc
+_MY_LDLIBS_CHECK_IFELSE(
+  $LTCMALLOC,
+  [if test "$CFG_WITH_TCMALLOC" != "no"; then
+    CFG_LIBS="$LTCMALLOC $CFG_LIBS";
+    # If using tcmalloc, add some extra options to make the compiler not assume
+    # it is using it's own versions of the standard library functions
+    _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-fno-builtin-malloc)
+    _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-fno-builtin-calloc)
+    _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-fno-builtin-realloc)
+    _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_SRC,-fno-builtin-free)
+   fi],
+  [if test "$CFG_WITH_TCMALLOC" = "yes"; then
+    AC_MSG_ERROR([--enable-tcmalloc was given but test for ${LTCMALLOC} failed])
+   fi])
+AC_SUBST(CFG_LIBS)
 
 # Set CFG_WITH_THREADED if can support threading
 AC_MSG_CHECKING(whether $CXX supports Verilated threads)

docs/.gitignore

@@ -1 +1,4 @@
+*.1
+*.html
+*.pdf
 Makefile

docs/CONTRIBUTING.adoc

@@ -0,0 +1,82 @@
+= How to contribute to Verilator
+
+Thanks for using Verilator!  We welcome your contributions in whatever form.
+
+This contributing document contains some suggestions that may make
+contributions flow more efficiently.
+
+==== Did you find a bug?
+
+* Please **Ensure the bug was not already reported** by searching
+  https://verilator.org/issues[Verilator Issues].
+
+* If you're unable to find an open issue addressing the problem,
+  https://verilator.org/issues/new[open a new Verilator issue].
+
+** Be sure to include a **code sample** or an **executable test case**
+   demonstrating the bug and expected behavior that is not occurring.
+
+** The ideal example works against other simulators, and is in the
+   test_regress/t test format, as described in
+   link:internals.adoc[docs/internals].
+
+==== Did you write a patch that fixes a bug?
+
+* Please https://verilator.org/issues/new[Open a new issue].
+
+* You may attach a patch to the issue, or (preferred) may request a GitHub
+  pull request.
+
+** Verilator uses Travis CI to provide continuous integration. You may
+   want to setup Travis CI on your GitHub branch to ensure your changes
+   keep the tests passing.  See link:internals.adoc[docs/internals].
+
+* Your source-code contributions must be certified as open source, under
+  the https://developercertificate.org/[Developer Certificate of
+  Origin]. On your first contribution, you must either:
+
+** Have your patch include the addition of your name to
+   link:CONTRIBUTORS[docs/CONTRIBUTORS] (preferred).
+
+** Use "git -s" as part of your commit. This adds a "signed-of-by"
+   attribute which will certify your contribution as described in the
+   https://github.com/wking/signed-off-by/blob/master/Documentation/SubmittingPatches[Signed-of-By
+   convention].
+
+** Email, or post in an issue a statement that you certify your
+   contributions.
+
+** In any of these cases your name will be added to
+   link:CONTRIBUTORS[docs/CONTRIBUTORS] and you are agreeing all future
+   contributions are also certified.
+
+** We occasionally accept contributions where people do not want their name
+   published. Please email us; you must still privately certify your
+   contribution.
+
+* Your test contributions are generally considered released into the
+  Creative Commons Public Domain (CC0), unless you request otherwise or put
+  a GNU/Artistic license on your file.
+
+* Most important is we get your patch. If you'd like to clean up
+  indentation and related issues ahead of our feedback, that is
+  appreciated; please see the coding conventions in
+  link:internals.adoc[docs/internals].
+
+==== Do you have questions?
+
+* Please see FAQ section and rest of the
+  https://verilator.org/verilator_doc.html[Verilator manual],
+  or https://verilator.org/verilator_doc.pdf[Verilator manual (PDF)].
+
+* Ask any question in the
+  https://verilator.org/forum[Verilator forum].
+
+==== Code of Conduct
+
+* Our contributors and participants pledge to make participation in our
+  project and our community a positive experience for everyone.  We follow
+  the https://www.contributor-covenant.org/version/1/4/code-of-conduct.html[Contributor
+  Covenant version 1.4].
+
+Thanks!

docs/CONTRIBUTORS

@@ -2,12 +2,43 @@ The contributors listed below have certified their Verilator contributions
 under the Developer Certificate of Origin
 (https://developercertificate.org/).
 
-Please see the Verilator manual for additional contributors.
+Please see the Verilator manual for 200+ additional contributors. Thanks to
+all.
 
-Jeremy Bennett
+Ahmed El-Mahmoudy
 Alex Chadwick
+Chris Randall
+David Stanford
+Driss Hafdi
+Eric Rippey
+Garrett Smith
+Geza Lore
+Gianfranco Costamagna
+Howard Su
+Iztok Jeras
+Jeremy Bennett
 John Coiner
+Julien Margetts
 Kanad Kanhere
+Kevin Kiningham
+Kuba Ober
+Lukasz Dalek
+Maarten De Braekeleer
+Maciej Sobkowski
+Marco Widmer
+Matthew Ballance
+Mike Popoloski
+Patrick Stewart
+Peter Monsson
+Philipp Wagner
+Pieter Kapsenberg
 Richard Myers
+Sean Cross
+Sebastien Van Cauwenberghe
 Stefan Wallentowitz
+Tobias Rosenkranz
+Tobias Wölfel
+Todd Strader
 Wilson Snyder
+Yutetsu TAKATSUKASA
+Yves Mathieu

docs/Makefile.in

@@ -3,19 +3,15 @@
 #
 # This file is part of Verilator.
 #
-# Code available from: http://www.veripool.org/verilator
+# Code available from: https://verilator.org
 #
 #*****************************************************************************
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
-#
-# Verilator is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 #****************************************************************************/
 #
@@ -23,6 +19,7 @@
 
 #### Start of system configuration section. ####
 
+ASCIIDOCTOR = asciidoctor
 DOXYGEN = doxygen
 
 #### End of system configuration section. ####
@@ -33,6 +30,9 @@ DOXYGEN = doxygen
 default:
 	@echo "error: make not supported here, run 'make docs' from Verilator top-level"
 
+%.html: %.adoc
+	$(ASCIIDOCTOR) $< -n -o $@
+
 clean mostlyclean distclean maintainer-clean::
 	rm -f $(SCRIPTS) *.tmp
 	rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
@@ -41,7 +41,7 @@ clean mostlyclean distclean maintainer-clean::
 	rm -f *.tex
 
 distclean maintainer-clean::
-	rm -f *.info* *.1 $(INFOS)
+	rm -f *.info* *.1 *.html *.pdf $(INFOS)
 	rm -f Makefile
 
 .PHONY: doxygen

docs/TODO

@@ -1,9 +1,10 @@
 // DESCRIPTION: Verilator: List of To Do issues.
 //
-// Copyright 2004-2019 by Wilson Snyder. This program is free software; you can
+// Copyright 2004-2020 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
+// SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 
 * Language support:
 ** Fix ordering of each bit separately in a signal (mips)
@@ -22,17 +23,10 @@
 ** Assertions
 ** Tristate support
 
-* Configure/Make/Install
-** Distribute with flex/bison already expanded?
-   Flex library not needed.  Probably too difficult to be worth it.
-
 * Testing:
-** Capture all inputs into global "rerun it" file
 ** Code to make wrapper that sets signals, so can do comparison checks
 ** New random program generator
 ** Better graph viewer with search and zoom
-** Port and test against opencores.org code
-** // verilator debug in code so can see only tree affecting those nodes
 
 * Usability:
 ** Detect and pre-remove most UNOPTFLATs

docs/clang-format.txt

@@ -0,0 +1,159 @@
+clang-format is used to standardize the indentation of the internal C++
+code.
+
+For the most part clang-format changes provide good consistency, the two
+main exceptions being the indentation of preprocessor directives, and
+tables of statements.
+
+Reformatting is generally performed only before other large changes are to
+be made to a file.  The following files are not yet clang-format clean:
+
+clang-format -i include/verilated.h
+clang-format -i include/verilated_dpi.h
+clang-format -i include/verilated_fst_c.h
+clang-format -i include/verilated_heavy.h
+clang-format -i include/verilated_imp.h
+clang-format -i include/verilated_save.h
+clang-format -i include/verilated_sym_props.h
+clang-format -i include/verilated_unordered_set_map.h
+clang-format -i include/verilated_vcd_c.h
+clang-format -i include/verilatedos.h
+
+clang-format -i include/verilated.cpp
+clang-format -i include/verilated_cov.cpp
+clang-format -i include/verilated_dpi.cpp
+clang-format -i include/verilated_fst_c.cpp
+clang-format -i include/verilated_save.cpp
+clang-format -i include/verilated_threads.cpp
+clang-format -i include/verilated_vcd_c.cpp
+clang-format -i include/verilated_vpi.cpp
+
+clang-format -i src/V3Ast.h
+clang-format -i src/V3AstNodes.h
+clang-format -i src/V3EmitCBase.h
+clang-format -i src/V3Error.h
+clang-format -i src/V3File.h
+clang-format -i src/V3FileLine.h
+clang-format -i src/V3Global.h
+clang-format -i src/V3Graph.h
+clang-format -i src/V3GraphDfa.h
+clang-format -i src/V3GraphStream.h
+clang-format -i src/V3Hashed.h
+clang-format -i src/V3LanguageWords.h
+clang-format -i src/V3LinkDot.h
+clang-format -i src/V3List.h
+clang-format -i src/V3Number.h
+clang-format -i src/V3Options.h
+clang-format -i src/V3OrderGraph.h
+clang-format -i src/V3Os.h
+clang-format -i src/V3ParseImp.h
+clang-format -i src/V3ParseSym.h
+clang-format -i src/V3Partition.h
+clang-format -i src/V3PartitionGraph.h
+clang-format -i src/V3PreLex.h
+clang-format -i src/V3PreProc.h
+clang-format -i src/V3Scoreboard.h
+clang-format -i src/V3SenTree.h
+clang-format -i src/V3Simulate.h
+clang-format -i src/V3Stats.h
+clang-format -i src/V3String.h
+clang-format -i src/V3SymTable.h
+clang-format -i src/V3TSP.h
+clang-format -i src/V3Task.h
+clang-format -i src/V3WidthCommit.h
+
+clang-format -i src/V3Active.cpp
+clang-format -i src/V3ActiveTop.cpp
+clang-format -i src/V3Assert.cpp
+clang-format -i src/V3AssertPre.cpp
+clang-format -i src/V3Ast.cpp
+clang-format -i src/V3AstNodes.cpp
+clang-format -i src/V3Begin.cpp
+clang-format -i src/V3Branch.cpp
+clang-format -i src/V3Broken.cpp
+clang-format -i src/V3CCtors.cpp
+clang-format -i src/V3Case.cpp
+clang-format -i src/V3Cast.cpp
+clang-format -i src/V3Cdc.cpp
+clang-format -i src/V3Changed.cpp
+clang-format -i src/V3Clean.cpp
+clang-format -i src/V3Clock.cpp
+clang-format -i src/V3Combine.cpp
+clang-format -i src/V3Const.cpp
+clang-format -i src/V3Coverage.cpp
+clang-format -i src/V3CoverageJoin.cpp
+clang-format -i src/V3Dead.cpp
+clang-format -i src/V3Delayed.cpp
+clang-format -i src/V3Depth.cpp
+clang-format -i src/V3DepthBlock.cpp
+clang-format -i src/V3EmitC.cpp
+clang-format -i src/V3EmitCInlines.cpp
+clang-format -i src/V3EmitCMake.cpp
+clang-format -i src/V3EmitCSyms.cpp
+clang-format -i src/V3EmitMk.cpp
+clang-format -i src/V3EmitV.cpp
+clang-format -i src/V3EmitXml.cpp
+clang-format -i src/V3Error.cpp
+clang-format -i src/V3Expand.cpp
+clang-format -i src/V3File.cpp
+clang-format -i src/V3FileLine.cpp
+clang-format -i src/V3Gate.cpp
+clang-format -i src/V3GenClk.cpp
+clang-format -i src/V3Graph.cpp
+clang-format -i src/V3GraphAcyc.cpp
+clang-format -i src/V3GraphAlg.cpp
+clang-format -i src/V3GraphDfa.cpp
+clang-format -i src/V3GraphPathChecker.cpp
+clang-format -i src/V3GraphTest.cpp
+clang-format -i src/V3Hashed.cpp
+clang-format -i src/V3Inline.cpp
+clang-format -i src/V3Inst.cpp
+clang-format -i src/V3InstrCount.cpp
+clang-format -i src/V3Life.cpp
+clang-format -i src/V3LifePost.cpp
+clang-format -i src/V3LinkCells.cpp
+clang-format -i src/V3LinkDot.cpp
+clang-format -i src/V3LinkJump.cpp
+clang-format -i src/V3LinkLValue.cpp
+clang-format -i src/V3LinkLevel.cpp
+clang-format -i src/V3LinkParse.cpp
+clang-format -i src/V3LinkResolve.cpp
+clang-format -i src/V3Localize.cpp
+clang-format -i src/V3Name.cpp
+clang-format -i src/V3Number.cpp
+clang-format -i src/V3Number_test.cpp
+clang-format -i src/V3Options.cpp
+clang-format -i src/V3Order.cpp
+clang-format -i src/V3Os.cpp
+clang-format -i src/V3Param.cpp
+clang-format -i src/V3ParseGrammar.cpp
+clang-format -i src/V3ParseImp.cpp
+clang-format -i src/V3ParseLex.cpp
+clang-format -i src/V3Partition.cpp
+clang-format -i src/V3PreProc.cpp
+clang-format -i src/V3PreShell.cpp
+clang-format -i src/V3Premit.cpp
+clang-format -i src/V3ProtectLib.cpp
+clang-format -i src/V3Reloop.cpp
+clang-format -i src/V3Scope.cpp
+clang-format -i src/V3Scoreboard.cpp
+clang-format -i src/V3Slice.cpp
+clang-format -i src/V3Split.cpp
+clang-format -i src/V3SplitAs.cpp
+clang-format -i src/V3SplitVar.cpp
+clang-format -i src/V3Stats.cpp
+clang-format -i src/V3StatsReport.cpp
+clang-format -i src/V3String.cpp
+clang-format -i src/V3Subst.cpp
+clang-format -i src/V3TSP.cpp
+clang-format -i src/V3Table.cpp
+clang-format -i src/V3Task.cpp
+clang-format -i src/V3Trace.cpp
+clang-format -i src/V3TraceDecl.cpp
+clang-format -i src/V3Tristate.cpp
+clang-format -i src/V3Undriven.cpp
+clang-format -i src/V3Unknown.cpp
+clang-format -i src/V3Unroll.cpp
+clang-format -i src/V3Width.cpp
+clang-format -i src/V3WidthSel.cpp
+clang-format -i src/Verilator.cpp

docs/doxygen-mainpage

@@ -3,4 +3,4 @@
  * \section intro_sec Introduction
  *
  * This is a full doxygen analysis of the Verilator source tree.
- */
+ */

docs/install.adoc

@@ -0,0 +1,306 @@
+= Verilator Installation
+:toc: right
+
+// Github doesn't render unless absolute URL
+image::https://www.veripool.org/img/verilator_256_200_min.png[Logo,256,200,role="right"]
+
+== Introduction
+
+This discusses how to install Verilator.  For more general information
+please see https://verilator.org[verilator.org].
+
+== Quick-start
+
+=== Install From a Package Manager
+
+Using a distribution's package manager is the easiest way to get
+started. (Note packages are unlikely to have the most recent version, so
+Git, below, maybe a better alternative.) To install as a package:
+
+   apt-get install verilator
+
+If this works, skip down to <<Running Verilator>>.
+
+=== Docker
+
+Verilator is available in pre-built Docker containers. See
+https://github.com/verilator/verilator/blob/master/ci/docker/run/README.adoc
+
+=== Git
+
+Installing Verilator with Git provides the most flexibility.
+For additional options and details see the additional sections below.  In
+brief:
+
+// Also update README
+....
+# Prerequisites:
+#sudo apt-get install git make autoconf g++ flex bison
+#sudo apt-get install libfl2  # Ubuntu only (ignore if gives error)
+#sudo apt-get install libfl-dev  # Ubuntu only (ignore if gives error)
+
+git clone https://git.veripool.org/git/verilator   # Only first time
+## Note the URL above is not a page you can see with a browser, it's for git only
+
+# Every time you need to build:
+unsetenv VERILATOR_ROOT  # For csh; ignore error if on bash
+unset VERILATOR_ROOT  # For bash
+cd verilator
+git pull        # Make sure git repository is up-to-date
+git tag         # See what versions exist
+#git checkout master      # Use development branch (e.g. recent bug fixes)
+#git checkout stable      # Use most recent stable release
+#git checkout v{version}  # Switch to specified release version
+
+autoconf        # Create ./configure script
+./configure
+make
+sudo make install
+# Now see "man verilator" or online verilator.pdf's for the example tutorials
+....
+
+If this works, skip down to <<Running Verilator>>.
+
+== Detailed Build Instructions
+
+This section describes details of the build process, and assumes you are
+building from Git or a tarball.  For using a pre-built binary for your
+Linux distribution, see instead <<Install From a Package Manager>>.
+
+=== OS Requirements
+
+Verilator is developed and has primary testing on Ubuntu.  Versions have
+also built on Redhat Linux, Apple OS-X, HPUX and Solaris.  It should run
+with minor porting on any GNU/Linux-ish platform.  Verilator also works on
+Windows under Cygwin, and Windows under MinGW (gcc -mno-cygwin).  Verilated
+output (not Verilator itself) compiles under all the options above, plus
+MSVC++.
+
+=== Install Prerequisites
+
+To build Verilator you will need to install some standard packages:
+
+   sudo apt-get install git
+   sudo apt-get install autoconf
+   sudo apt-get install flex bison
+
+The following are optional, but improve compilation speed:
+
+   sudo apt-get install libgoogle-perftools-dev
+
+Additionally, to build or run Verilator you need these standard packages:
+
+   sudo apt-get install perl python3
+   sudo apt-get install make
+   sudo apt-get install g++  # Alternatively, clang
+   sudo apt-get install libgz  # Non-Ubuntu (ignore if gives error)
+   sudo apt-get install libfl2 libfl-dev zlibc zlib1g zlib1g-dev  # Ubuntu only (ignore if gives error)
+
+Those developing Verilator may also want these (see internals.adoc):
+
+   sudo apt-get install gdb asciidoctor graphviz cmake
+   cpan install Pod::Perldoc
+   cpan install Unix::Processors
+   cpan install Parallel::Forker
+   cpan install Bit::Vector
+
+==== Install SystemC
+
+If you will be using SystemC (vs straight C++ output), download
+https://www.accellera.org/downloads/standards/systemc[SystemC].
+Follow their installation instructions.  You will need to set `SYSTEMC_INCLUDE`
+to point to the include directory with `systemc.h` in it, and `SYSTEMC_LIBDIR`
+to points to the directory with `libsystemc.a` in it.  (Older installations
+may set `SYSTEMC` and `SYSTEMC_ARCH` instead.)
+
+==== Install GTKWave
+
+To make use of Verilator FST tracing you will want
+http://gtkwave.sourceforge.net/[GTKwave] installed, however this is not
+required at Verilator build time.
+
+=== Obtain Sources
+
+You may use Git or a tarball for the sources.  Git is the supported option.
+(If using a historical build that uses a tarball, tarballs are obtained
+from https://www.veripool.org/projects/verilator/wiki/Download[Verilator
+Downloads]; we presume you know how to use it, and is not described here.)
+
+Get the sources from the repository: (You need do this only once, ever.)
+
+   git clone https://git.veripool.org/git/verilator   # Only first time
+   ## Note the URL above is not a page you can see with a browser, it's for git only
+
+Enter the checkout and determine what version/branch to use:
+
+   cd verilator
+   git pull        # Make sure we're up-to-date
+   git tag         # See what versions exist
+   #git checkout master      # Use development branch (e.g. recent bug fix)
+   #git checkout stable      # Use most recent release
+   #git checkout v{version}  # Switch to specified release version
+
+=== Auto Configure
+
+Create the configuration script:
+
+   autoconf        # Create ./configure script
+
+=== Eventual Installation Options
+
+Before configuring the build, you have to decide how you're going to
+eventually install the kit.  Verilator will be compiling the current value
+of `VERILATOR_ROOT`, `SYSTEMC_INCLUDE`, and `SYSTEMC_LIBDIR` as defaults
+into the executable, so they must be correct before configuring.
+
+These are the options:
+
+==== 1. Run-in-Place from VERILATOR_ROOT
+
+Our personal favorite is to always run Verilator in-place from its Git
+directory.  This allows the easiest experimentation and upgrading, and
+allows many versions of Verilator to co-exist on a system.
+
+   export VERILATOR_ROOT=`pwd`   # if your shell is bash
+   setenv VERILATOR_ROOT `pwd`   # if your shell is csh
+   ./configure
+   # Running will use files from $VERILATOR_ROOT, so no install needed
+
+Note after installing (below steps), a calling program or shell must set
+the environment variable `VERILATOR_ROOT` to point to this Git directory,
+then execute `$VERILATOR_ROOT/bin/verilator`, which will find the path to
+all needed files.
+
+==== 2. Install into a CAD Disk
+
+You may eventually be installing onto a project/company-wide "CAD" tools
+disk that may support multiple versions of every tool.  Target the build to
+a destination directory name that includes the Verilator version name:
+
+   unset VERILATOR_ROOT      # if your shell is bash
+   unsetenv VERILATOR_ROOT   # if your shell is csh
+   # For the tarball, use the version number instead of git describe
+   ./configure --prefix /CAD_DISK/verilator/`git describe | sed "s/verilator_//"`
+
+Note after installing (below steps), if you use
+http://modules.sourceforge.net/[modulecmd], you'll want a module file like
+the following:
+
+.modulecmd's verilator/version file
+----
+set install_root /CAD_DISK/verilator/{version-number-used-above}
+unsetenv VERILATOR_ROOT
+prepend-path PATH $install_root/bin
+prepend-path MANPATH $install_root/man
+prepend-path PKG_CONFIG_PATH $install_root/share/pkgconfig
+----
+
+==== 3. Install into a Specific Path
+
+You may eventually install Verilator into a specific installation prefix,
+as most GNU tools support:
+
+   unset VERILATOR_ROOT      # if your shell is bash
+   unsetenv VERILATOR_ROOT   # if your shell is csh
+   ./configure --prefix /opt/verilator-VERSION
+
+Then after installing (below steps) you will need to add
+`/opt/verilator-VERSION/bin` to `$PATH`.
+
+==== 4. Install System Globally
+
+The final option is to eventually install Verilator globally, using the
+normal system paths:
+
+   unset VERILATOR_ROOT      # if your shell is bash
+   unsetenv VERILATOR_ROOT   # if your shell is csh
+   ./configure
+
+Then after installing (below) the binary directories should already be in
+your `$PATH`.
+
+=== Configure
+
+The command to configure the package was described in the previous step.
+Developers should configure to have more complete developer tests.
+Additional packages may be required for these tests.
+
+   export VERILATOR_AUTHOR_SITE=1    # Put in your .bashrc
+   ./configure --enable-longtests  ...above options...
+
+=== Compile
+
+Compile Verilator:
+
+   make -j
+
+=== Test
+
+Check the compilation by running self-tests:
+
+   make test
+
+=== Install
+
+If you used any but the <<1. Run-in-Place from VERILATOR_ROOT>> scheme,
+install to the OS-standard place:
+
+   make install
+
+== Running Verilator
+
+To run Verilator, see the example sections in the
+https://verilator.org/verilator_doc.html[Verilator manual (HTML)],
+or https://verilator.org/verilator_doc.pdf[Verilator manual (PDF)].
+
+Also see the `examples/` directory that is part of the kit, and is installed
+(in a OS-specific place, often in e.g. `/usr/local/share/verilator/examples`).
+
+     cd examples/make_hello_c
+     make
+
+Note if you did a `make install` above you should not have `VERILATOR_ROOT`
+set in your environment; it is built into the executable.
+
+== Announcements
+
+To get notified of new releases, login to
+https://www.veripool.org[Veripool], and click the "watch" button near the
+top right under https://www.veripool.org/projects/verilator/news[Verilator
+News].
+
+== Directory Structure
+
+Some relevant files and directories in this package are as follows:
+
+   Changes                     => Version history
+   README.adoc                 => This document
+   bin/verilator               => Compiler wrapper invoked to Verilate code
+   docs/                       => Additional documentation
+   examples/make_hello_c       => Example GNU-make simple Verilog->C++ conversion
+   examples/make_hello_sc      => Example GNU-make simple Verilog->SystemC conversion
+   examples/make_tracing_c     => Example GNU-make Verilog->C++ with tracing
+   examples/make_tracing_sc    => Example GNU-make Verilog->SystemC with tracing
+   examples/make_protect_lib   => Example using --protect-lib
+   examples/cmake_hello_c      => Example building make_hello_c with CMake
+   examples/cmake_hello_sc     => Example building make_hello_sc with CMake
+   examples/cmake_tracing_c    => Example building make_tracing_c with CMake
+   examples/cmake_tracing_sc   => Example building make_tracing_sc with CMake
+   examples/cmake_protect_lib  => Example building make_protect_lib with CMake
+   include/                    => Files that should be in your -I compiler path
+   include/verilated*.cpp      => Global routines to link into your simulator
+   include/verilated*.h        => Global headers
+   include/verilated.mk        => Common Makefile
+   src/                        => Translator source code
+   test_regress                => Internal tests
+
+For files created after a design is Verilated, see the
+https://verilator.org/verilator_doc.html[Verilator manual (HTML)],
+or https://verilator.org/verilator_doc.pdf[Verilator manual (PDF)].
+
+== License
+
+Copyright 2008-2020 by Wilson Snyder.  Verilator is free software; you can
+redistribute it and/or modify it under the terms of either the GNU Lesser
+General Public License Version 3 or the Perl Artistic License Version 2.0.
+// SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0

docs/xml.adoc

@@ -0,0 +1,72 @@
+= Verilator XML Output
+:toc: right
+
+// Github doesn't render unless absolute URL
+image::https://www.veripool.org/img/verilator_256_200_min.png[Logo,256,200,role="right"]
+
+== Introduction
+
+This document describes Verilator's XML output. For more general information
+please see https://verilator.org[verilator.org].
+
+== General
+
+Verilator's XML output is enabled with the `--xml-only` flag. It contains
+limited information about the elaborated design including files, modules,
+instance hierarchy, logic and data types. There is no formal schema since part
+of the structure of the XML document matches the compiled code which would
+require the schema to describe legal SystemVerilog structure. The intended
+usage is to enable other downstream tools to take advantage of Verilator's
+parser.
+
+== Structure
+
+The XML document is consists of 4 sections within the top level `verilator_xml`
+element:
+
+`<files>`...`</files>`::
+
+This section contains a list of all design files read, including the
+built-in constructs and the command line as their own entries.  Each
+`<file>` has an attribute `id` which is a short ASCII string unique to that
+file. Other elements' `loc` attributes use this id to refer to a particular
+file.
+
+`<module_files>`...`</module_files>`::
+
+All files containing Verilog module definitions are listed in this section.
+This element's contents is a subset of the `<files>` element's contents.
+
+`<cells>`...`</cells>`::
+
+The cells section of the XML document contains the design instance
+hierarchy.  Each instance is represented with the `<cell>` element with the
+following attributes:
+
+* `fl` (deprecated): The file id and line number where the module was
+  instanced.  Use `loc` instead.
+
+* `loc`: The file id, first line number, last line number, first column
+   number and last column number of the identifier where the module was
+   instanced, separated by commas.
+
+* `name`: The instance name.
+
+* `submodname`: The module name uniquified with particular parameter values (if any).
+
+* `hier`: The full hierarchy path.
+
+`<netlist>`...`</netlist>`::
+
+The netlist section contains a number of `<module>`...`</module>` elements,
+each describing the contents of that module, and a single `<typetable>`...
+`</typetable>` element which lists all used types used within the
+modules. Each type has a numeric `id` attribute that is referred to by
+elements in the `<module>` elements using the `dtype_id` attribute.
+
+== Distribution
+
+Copyright 2020-2020 by Wilson Snyder.  Verilator is free software; you can
+redistribute it and/or modify it under the terms of either the GNU Lesser
+General Public License Version 3 or the Perl Artistic License Version 2.0.
+// SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0

examples/cmake_hello_c/.gitignore

@@ -0,0 +1 @@
+build*

examples/cmake_hello_c/CMakeLists.txt

@@ -0,0 +1,38 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake Example: Small CMakeLists.txt
+#
+# This is an example cmake script to build a verilog to systemc project
+# using cmake and verilator.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This example builds the tracing_c example using CMake
+# To use it, run the following:
+
+# cd /path/to/verilator/examples/cmake_c
+# rm -rf build && mkdir build && cd build
+# cmake ..
+# cmake --build .
+
+cmake_minimum_required(VERSION 3.8)
+project(cmake_hello_c)
+
+find_package(verilator HINTS $ENV{VERILATOR_ROOT} ${VERILATOR_ROOT})
+if (NOT verilator_FOUND)
+  message(FATAL_ERROR "Verilator was not found. Either install it, or set the VERILATOR_ROOT environment variable")
+endif()
+
+# Create a new executable target that will contain all your sources
+add_executable(example ../make_hello_c/sim_main.cpp)
+
+# Add the Verilated circuit to the target
+verilate(example
+  INCLUDE_DIRS "../make_hello_c"
+  SOURCES ../make_hello_c/top.v)

examples/cmake_hello_c/Makefile

@@ -0,0 +1,80 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake example usage
+#
+# This file shows usage of the CMake script.
+# This makefile is here for testing the examples and should
+# generally not be added to a CMake project.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR_COVERAGE = verilator_coverage
+else
+export VERILATOR_ROOT
+VERILATOR_COVERAGE = $(VERILATOR_ROOT)/bin/verilator_coverage
+endif
+######################################################################
+
+# Check if CMake is installed and of correct version
+ifeq ($(shell which cmake),)
+TARGET := nocmake
+else
+CMAKE_VERSION := $(shell cmake --version | grep -Po '(\d[\.\d]+)')
+CMAKE_MAJOR := $(shell echo $(CMAKE_VERSION) | cut -f1 -d.)
+CMAKE_MINOR := $(shell echo $(CMAKE_VERSION) | cut -f2 -d.)
+CMAKE_GT_3_8 := $(shell [ $(CMAKE_MAJOR) -gt 3 -o \( $(CMAKE_MAJOR) -eq 3 -a $(CMAKE_MINOR) -ge 8 \) ] && echo true)
+ifeq ($(CMAKE_GT_3_8),true)
+TARGET := run
+else
+TARGET := oldcmake
+endif
+endif
+
+default: $(TARGET)
+
+run:
+	@echo
+	@echo "-- Verilator CMake hello world example"
+
+	@echo
+	@echo "-- CMake ----------------"
+	mkdir -p build && cd build && cmake ..
+
+	@echo
+	@echo "-- COMPILE -----------------"
+	cmake --build build
+
+	@echo
+	@echo "-- RUN ---------------------"
+	build/example
+
+	@echo
+	@echo "-- DONE --------------------"
+	@echo
+
+clean mostlyclean distclean maintainer-clean:
+	@rm -rf build logs
+
+nocmake:
+	@echo
+	@echo "%Skip: CMake has not been found"
+	@echo
+
+oldcmake:
+	@echo
+	@echo "%Skip: CMake version is too old (need at least 3.8)"
+	@echo

examples/cmake_hello_sc/.gitignore

@@ -0,0 +1 @@
+build*

examples/cmake_hello_sc/CMakeLists.txt

@@ -0,0 +1,47 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake Example: Small CMakeLists.txt with SystemC
+#
+# This is an example cmake script to build a verilog to SystemC project
+# using CMake and Verilator.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This example builds the tracing_sc example using CMake
+# To use it, run the following:
+
+# cd /path/to/verilator/examples/cmake_sc
+# rm -rf build && mkdir build && cd build
+# cmake ..
+# cmake --build .
+
+cmake_minimum_required(VERSION 3.8)
+project(cmake_hello_sc)
+
+find_package(verilator HINTS $ENV{VERILATOR_ROOT} ${VERILATOR_ROOT})
+if (NOT verilator_FOUND)
+  message(FATAL_ERROR "Verilator was not found. Either install it, or set the VERILATOR_ROOT environment variable")
+endif()
+
+# SystemC dependencies
+set(THREADS_PREFER_PTHREAD_FLAG ON)
+find_package(Threads REQUIRED)
+
+# Find SystemC using SystemC's CMake integration
+find_package(SystemCLanguage QUIET)
+
+# Create a new executable target that will contain all your sources
+add_executable(example ../make_hello_sc/sc_main.cpp)
+
+# Add the Verilated circuit to the target
+verilate(example SYSTEMC
+  INCLUDE_DIRS "../make_hello_sc"
+  SOURCES ../make_hello_sc/top.v)
+
+verilator_link_systemc(example)

examples/cmake_hello_sc/Makefile

@@ -0,0 +1,130 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake example usage
+#
+# This file shows usage of the CMake script.
+# This makefile is here for testing the examples and should
+# generally not be added to a CMake project.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR_COVERAGE = verilator_coverage
+else
+export VERILATOR_ROOT
+VERILATOR_COVERAGE = $(VERILATOR_ROOT)/bin/verilator_coverage
+endif
+######################################################################
+
+# Check if CMake is installed and of correct version
+ifeq ($(shell which cmake),)
+	TARGET := nocmake
+else
+CMAKE_VERSION := $(shell cmake --version | grep -Po '(\d[\.\d]+)')
+CMAKE_MAJOR := $(shell echo $(CMAKE_VERSION) | cut -f1 -d.)
+CMAKE_MINOR := $(shell echo $(CMAKE_VERSION) | cut -f2 -d.)
+CMAKE_GT_3_8 := $(shell [ $(CMAKE_MAJOR) -gt 3 -o \( $(CMAKE_MAJOR) -eq 3 -a $(CMAKE_MINOR) -ge 8 \) ] && echo true)
+ifneq ($(CMAKE_GT_3_8),true)
+TARGET := oldcmake
+else
+
+# Test existence of SYSTEMC_INCLUDE and SYSTEMC_LIBDIR environment variabless
+ifneq (,$(SYSTEMC_INCLUDE))
+ifneq (,${SYSTEMC_LIBDIR})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test existence of SYSTEMC_ROOT environment variable
+ifneq (SYSTEMC_SET, true)
+ifneq (,${SYSTEMC_ROOT})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test existence of SYSTEMC environment variable
+ifneq (SYSTEMC_SET, true)
+ifneq (,${SYSTEMC})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test whether SystemC is installed with CMake support
+# This will print a CMake error about processing arguments that can (currently) be ignored.
+ifneq (SYSTEMC_SET, true)
+FINDSC := $(shell mkdir -p build && cd build && cmake --find-package -DNAME=SystemCLanguage -DCMAKE_USE_PTHREADS_INIT=ON -DCOMPILER_ID=GNU -DLANGUAGE=CXX -DMODE=EXIST -DThreads_FOUND=ON)
+ifneq (,$(findstring SystemCLanguage found,$(FINDSC)))
+SYSTEMC_SET := true
+endif
+endif
+
+ifeq ($(SYSTEMC_SET), true)
+TARGET := run
+else
+TARGET := nosc
+endif
+
+endif
+endif
+
+default: $(TARGET)
+
+run:
+	@echo
+	@echo "-- Verilator CMake SystemC hello-world simple example"
+
+	@echo
+	@echo "-- CMake ----------------"
+	mkdir -p build && cd build && cmake ..
+
+	@echo
+	@echo "-- COMPILE -----------------"
+	cmake --build build
+
+	@echo
+	@echo "-- RUN ---------------------"
+	@mkdir -p logs
+	build/example
+
+	@echo "-- DONE --------------------"
+	@echo "Note: Once this example is understood, see examples/cmake_tracing_sc."
+	@echo "Note: Also see the EXAMPLE section in the verilator manpage/document."
+
+clean mostlyclean distclean maintainer-clean:
+	@rm -rf build logs
+
+nocmake:
+	@echo
+	@echo "%Skip: CMake has not been found"
+	@echo
+
+oldcmake:
+	@echo
+	@echo "%Skip: CMake version is too old (need at least 3.8)"
+	@echo
+
+nosc:
+	@echo
+	@echo "%Skip: CMake could not find SystemC."
+	@echo "% Make sure that either:"
+	@echo "% - The environment variables SYSTEMC_INCLUDE and SYSTEMC_LIBDIR are exported."
+	@echo "% - Or, the environment variable SYSTEMC_ROOT is exported."
+	@echo "% - Or, The environment variable SYSTEMC is exported."
+	@echo "% - Or, if the SystemC installation provides CMake support,"
+	@echo "%   that its installation prefix is in CMAKE_PREFIX_PATH."
+	@echo "% Also that the C++ standard of the SystemC library is the same as this example."
+	@echo "% Please see the Verilator documentation's CMake section for more information."
+	@echo

examples/cmake_protect_lib/.gitignore

@@ -0,0 +1 @@
+build*

examples/cmake_protect_lib/CMakeLists.txt

@@ -0,0 +1,61 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake Example: Small CMakeLists.txt
+#
+# This is an example cmake script to build a verilog to systemc project
+# using cmake and verilator.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This example builds the tracing_c example using CMake
+# To use it, run the following:
+
+# cd /path/to/verilator/examples/cmake_c
+# rm -rf build && mkdir build && cd build
+# cmake ..
+# cmake --build .
+
+cmake_minimum_required(VERSION 3.8)
+project(cmake_protect_lib)
+
+find_package(verilator HINTS $ENV{VERILATOR_ROOT} ${VERILATOR_ROOT})
+if (NOT verilator_FOUND)
+  message(FATAL_ERROR "Verilator was not found. Either install it, or set the VERILATOR_ROOT environment variable")
+endif()
+
+# Create the main executable target
+add_executable(example ../make_protect_lib/sim_main.cpp)
+
+# Create a secret library
+add_library(verilated_secret STATIC) # or SHARED for a shared library
+target_link_libraries(example PRIVATE verilated_secret)
+# To create both libraries on CMake >= 3.12 replace the above 2 lines with the following:
+# add_library(verilated_secret OBJECT)
+# set_property(TARGET verilated_secret PROPERTY POSITION_INDEPENDENT_CODE 1)
+# add_library(verilated_secret_static STATIC  $<TARGET_OBJECTS:verilated_secret>)
+# set_target_properties(verilated_secret_static PROPERTIES OUTPUT_NAME verilated_secret)
+# add_library(verilated_secret_shared SHARED  $<TARGET_OBJECTS:verilated_secret>)
+# set_target_properties(verilated_secret_shared PROPERTIES OUTPUT_NAME verilated_secret)
+# target_link_libraries(example PRIVATE verilated_secret_static)
+
+# Setup random seed
+verilator_generate_key(KEY_INIT)
+set(PROTECT_KEY ${KEY_INIT} CACHE STRING "Random seed for protection")
+
+# Add the Verilated modules to the targets
+verilate(verilated_secret
+  VERILATOR_ARGS --protect-lib verilated_secret
+                 --protect-key ${PROTECT_KEY}
+  DIRECTORY ${CMAKE_CURRENT_BINARY_DIR}/verilated_secret
+  SOURCES ../make_protect_lib/secret_impl.v)
+
+# Include location of verilated_secret.sv wrapper
+verilate(example
+  VERILATOR_ARGS "-I${CMAKE_CURRENT_BINARY_DIR}/verilated_secret"
+  SOURCES ../make_protect_lib/top.v)

examples/cmake_protect_lib/Makefile

@@ -0,0 +1,80 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake example usage
+#
+# This file shows usage of the CMake script.
+# This makefile is here for testing the examples and should
+# generally not be added to a CMake project.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR_COVERAGE = verilator_coverage
+else
+export VERILATOR_ROOT
+VERILATOR_COVERAGE = $(VERILATOR_ROOT)/bin/verilator_coverage
+endif
+######################################################################
+
+# Check if CMake is installed and of correct version
+ifeq ($(shell which cmake),)
+TARGET := nocmake
+else
+CMAKE_VERSION := $(shell cmake --version | grep -Po '(\d[\.\d]+)')
+CMAKE_MAJOR := $(shell echo $(CMAKE_VERSION) | cut -f1 -d.)
+CMAKE_MINOR := $(shell echo $(CMAKE_VERSION) | cut -f2 -d.)
+CMAKE_GT_3_8 := $(shell [ $(CMAKE_MAJOR) -gt 3 -o \( $(CMAKE_MAJOR) -eq 3 -a $(CMAKE_MINOR) -ge 8 \) ] && echo true)
+ifeq ($(CMAKE_GT_3_8),true)
+TARGET := run
+else
+TARGET := oldcmake
+endif
+endif
+
+default: $(TARGET)
+
+run:
+	@echo
+	@echo "-- Verilator CMake protect_lib example"
+
+	@echo
+	@echo "-- CMake ----------------"
+	mkdir -p build && cd build && cmake ..
+
+	@echo
+	@echo "-- COMPILE -----------------"
+	cmake --build build
+
+	@echo
+	@echo "-- RUN ---------------------"
+	build/example
+
+	@echo
+	@echo "-- DONE --------------------"
+	@echo
+
+clean mostlyclean distclean maintainer-clean:
+	@rm -rf build logs
+
+nocmake:
+	@echo
+	@echo "%Skip: CMake has not been found"
+	@echo
+
+oldcmake:
+	@echo
+	@echo "%Skip: CMake version is too old (need at least 3.8)"
+	@echo

examples/cmake_tracing_c/.gitignore

@@ -0,0 +1,2 @@
+build*
+logs

examples/cmake_tracing_c/CMakeLists.txt

@@ -0,0 +1,39 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake Example: Small CMakeLists.txt with tracing
+#
+# This is an example cmake script to build a verilog to systemc project
+# using cmake and verilator.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This example builds the make_tracing_c example using CMake
+# To use it, run the following:
+
+# cd /path/to/verilator/examples/cmake_tracing_c
+# rm -rf build && mkdir build && cd build
+# cmake ..
+# cmake --build .
+
+cmake_minimum_required(VERSION 3.8)
+project(cmake_tracing_c)
+
+find_package(verilator HINTS $ENV{VERILATOR_ROOT} ${VERILATOR_ROOT})
+if (NOT verilator_FOUND)
+  message(FATAL_ERROR "Verilator was not found. Either install it, or set the VERILATOR_ROOT environment variable")
+endif()
+
+# Create a new executable target that will contain all your sources
+add_executable(example ../make_tracing_c/sim_main.cpp)
+
+# Add the Verilated circuit to the target
+verilate(example COVERAGE TRACE
+  INCLUDE_DIRS "../make_tracing_c"
+  VERILATOR_ARGS -f ../make_tracing_c/input.vc -Os -x-assign 0
+  SOURCES ../make_tracing_c/top.v)

examples/cmake_tracing_c/Makefile

@@ -0,0 +1,86 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake example usage
+#
+# This file shows usage of the CMake script.
+# This makefile is here for testing the examples and should
+# generally not be added to a CMake project.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR_COVERAGE = verilator_coverage
+else
+export VERILATOR_ROOT
+VERILATOR_COVERAGE = $(VERILATOR_ROOT)/bin/verilator_coverage
+endif
+######################################################################
+
+# Check if CMake is installed and of correct version
+ifeq ($(shell which cmake),)
+TARGET := nocmake
+else
+CMAKE_VERSION := $(shell cmake --version | grep -Po '(\d[\.\d]+)')
+CMAKE_MAJOR := $(shell echo $(CMAKE_VERSION) | cut -f1 -d.)
+CMAKE_MINOR := $(shell echo $(CMAKE_VERSION) | cut -f2 -d.)
+CMAKE_GT_3_8 := $(shell [ $(CMAKE_MAJOR) -gt 3 -o \( $(CMAKE_MAJOR) -eq 3 -a $(CMAKE_MINOR) -ge 8 \) ] && echo true)
+ifeq ($(CMAKE_GT_3_8),true)
+TARGET := run
+else
+TARGET := oldcmake
+endif
+endif
+
+default: $(TARGET)
+
+run:
+	@echo
+	@echo "-- Verilator CMake tracing example"
+
+	@echo
+	@echo "-- CMake ----------------"
+	mkdir -p build && cd build && cmake ..
+
+	@echo
+	@echo "-- COMPILE -----------------"
+	cmake --build build
+
+	@echo
+	@echo "-- RUN ---------------------"
+	@mkdir -p logs
+	build/example +trace
+
+	@echo
+	@echo "-- COVERAGE ----------------"
+	$(VERILATOR_COVERAGE) --annotate logs/annotated logs/coverage.dat
+
+	@echo
+	@echo "-- DONE --------------------"
+	@echo "To see waveforms, open vlt_dump.vcd in a waveform viewer"
+	@echo
+
+clean mostlyclean distclean maintainer-clean:
+	@rm -rf build logs
+
+nocmake:
+	@echo
+	@echo "%Skip: CMake has not been found"
+	@echo
+
+oldcmake:
+	@echo
+	@echo "%Skip: CMake version is too old (need at least 3.8)"
+	@echo

examples/cmake_tracing_sc/.gitignore

@@ -0,0 +1,7 @@
+*.dmp
+*.log
+*.csrc
+*.vcd
+obj_*
+logs
+build*

examples/cmake_tracing_sc/CMakeLists.txt

@@ -0,0 +1,48 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake Example: Small CMakeLists.txt with SystemC tracing
+#
+# This is an example cmake script to build a verilog to SystemC project
+# using CMake and Verilator.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This example builds the tracing_sc example using CMake
+# To use it, run the following:
+
+# cd /path/to/verilator/examples/cmake_tracing_sc
+# rm -rf build && mkdir build && cd build
+# cmake ..
+# cmake --build .
+
+cmake_minimum_required(VERSION 3.8)
+project(cmake_tracing_sc_example)
+
+find_package(verilator HINTS $ENV{VERILATOR_ROOT} ${VERILATOR_ROOT})
+if (NOT verilator_FOUND)
+  message(FATAL_ERROR "Verilator was not found. Either install it, or set the VERILATOR_ROOT environment variable")
+endif()
+
+# SystemC dependencies
+set(THREADS_PREFER_PTHREAD_FLAG ON)
+find_package(Threads REQUIRED)
+
+# Find SystemC using SystemC's CMake integration
+find_package(SystemCLanguage QUIET)
+
+# Create a new executable target that will contain all your sources
+add_executable(example ../make_tracing_sc/sc_main.cpp)
+
+# Add the Verilated circuit to the target
+verilate(example SYSTEMC COVERAGE TRACE
+  INCLUDE_DIRS "../make_tracing_sc"
+  VERILATOR_ARGS -f ../make_tracing_sc/input.vc -Os -x-assign 0
+  SOURCES ../make_tracing_sc/top.v)
+
+verilator_link_systemc(example)

examples/cmake_tracing_sc/Makefile

@@ -0,0 +1,135 @@
+######################################################################
+#
+# DESCRIPTION: Verilator CMake example usage
+#
+# This file shows usage of the CMake script.
+# This makefile is here for testing the examples and should
+# generally not be added to a CMake project.
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR_COVERAGE = verilator_coverage
+else
+export VERILATOR_ROOT
+VERILATOR_COVERAGE = $(VERILATOR_ROOT)/bin/verilator_coverage
+endif
+######################################################################
+
+# Check if CMake is installed and of correct version
+ifeq ($(shell which cmake),)
+	TARGET := nocmake
+else
+CMAKE_VERSION := $(shell cmake --version | grep -Po '(\d[\.\d]+)')
+CMAKE_MAJOR := $(shell echo $(CMAKE_VERSION) | cut -f1 -d.)
+CMAKE_MINOR := $(shell echo $(CMAKE_VERSION) | cut -f2 -d.)
+CMAKE_GT_3_8 := $(shell [ $(CMAKE_MAJOR) -gt 3 -o \( $(CMAKE_MAJOR) -eq 3 -a $(CMAKE_MINOR) -ge 8 \) ] && echo true)
+ifneq ($(CMAKE_GT_3_8),true)
+TARGET := oldcmake
+else
+
+# Test existence of SYSTEMC_INCLUDE and SYSTEMC_LIBDIR environment variabless
+ifneq (,$(SYSTEMC_INCLUDE))
+ifneq (,${SYSTEMC_LIBDIR})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test existence of SYSTEMC_ROOT environment variable
+ifneq (SYSTEMC_SET, true)
+ifneq (,${SYSTEMC_ROOT})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test existence of SYSTEMC environment variable
+ifneq (SYSTEMC_SET, true)
+ifneq (,${SYSTEMC})
+SYSTEMC_SET := true
+endif
+endif
+
+# Test whether SystemC is installed with CMake support
+# This will print a CMake error about processing arguments that can (currently) be ignored.
+ifneq (SYSTEMC_SET, true)
+FINDSC := $(shell mkdir -p build && cd build && cmake --find-package -DNAME=SystemCLanguage -DCMAKE_USE_PTHREADS_INIT=ON -DCOMPILER_ID=GNU -DLANGUAGE=CXX -DMODE=EXIST -DThreads_FOUND=ON)
+ifneq (,$(findstring SystemCLanguage found,$(FINDSC)))
+SYSTEMC_SET := true
+endif
+endif
+
+ifeq ($(SYSTEMC_SET), true)
+TARGET := run
+else
+TARGET := nosc
+endif
+
+endif
+endif
+
+default: $(TARGET)
+
+run:
+	@echo
+	@echo "-- Verilator CMake SystemC tracing example"
+
+	@echo
+	@echo "-- CMake ----------------"
+	mkdir -p build && cd build && cmake ..
+
+	@echo
+	@echo "-- COMPILE -----------------"
+	cmake --build build
+
+	@echo
+	@echo "-- RUN ---------------------"
+	@mkdir -p logs
+	build/example +trace
+
+	@echo
+	@echo "-- COVERAGE ----------------"
+	$(VERILATOR_COVERAGE) --annotate logs/annotated logs/coverage.dat
+
+	@echo
+	@echo "-- DONE --------------------"
+	@echo "To see waveforms, open vlt_dump.vcd in a waveform viewer"
+	@echo
+
+clean mostlyclean distclean maintainer-clean:
+	@rm -rf build logs
+
+nocmake:
+	@echo
+	@echo "%Skip: CMake has not been found"
+	@echo
+
+oldcmake:
+	@echo
+	@echo "%Skip: CMake version is too old (need at least 3.8)"
+	@echo
+
+nosc:
+	@echo
+	@echo "%Skip: CMake could not find SystemC."
+	@echo "% Make sure that either:"
+	@echo "% - The environment variables SYSTEMC_INCLUDE and SYSTEMC_LIBDIR are exported."
+	@echo "% - Or, the environment variable SYSTEMC_ROOT is exported."
+	@echo "% - Or, The environment variable SYSTEMC is exported."
+	@echo "% - Or, if the SystemC installation provides CMake support,"
+	@echo "%   that its installation prefix is in CMAKE_PREFIX_PATH."
+	@echo "% Also that the C++ standard of the SystemC library is the same as this example."
+	@echo "% Please see the Verilator documentation's CMake section for more information."
+	@echo

examples/make_hello_c/Makefile

@@ -5,10 +5,11 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 ######################################################################
 # Check for sanity to avoid later confusion
@@ -21,10 +22,10 @@ endif
 
 # This is intended to be a minimal example.  Before copying this to start a
 # real project, it is better to start with a more complete example,
-# e.g. examples/tracing_c.
+# e.g. examples/make_tracing_c.
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator
@@ -42,7 +43,7 @@ default:
 	@echo "-- RUN ---------------------"
 	obj_dir/Vtop
 	@echo "-- DONE --------------------"
-	@echo "Note: Once this example is understood, see examples/tracing_c."
+	@echo "Note: Once this example is understood, see examples/make_tracing_c."
 	@echo "Note: Also see the EXAMPLE section in the verilator manpage/document."
 
 ######################################################################

examples/make_hello_c/sim_main.cpp

@@ -1,7 +1,8 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 //======================================================================
 
 // Include common routines

examples/make_hello_c/top.v

@@ -1,7 +1,8 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 
 // See also the EXAMPLE section in the verilator manpage/document.
 module top;

examples/make_hello_sc/Makefile

@@ -5,10 +5,11 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 ######################################################################
 # Check for sanity to avoid later confusion
@@ -21,10 +22,10 @@ endif
 
 # This is intended to be a minimal example.  Before copying this to start a
 # real project, it is better to start with a more complete example,
-# e.g. examples/tracing_sc.
+# e.g. examples/make_tracing_sc.
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator
@@ -51,7 +52,7 @@ run:
 	@echo "-- RUN ---------------------"
 	obj_dir/Vtop
 	@echo "-- DONE --------------------"
-	@echo "Note: Once this example is understood, see examples/tracing_sc."
+	@echo "Note: Once this example is understood, see examples/make_tracing_sc."
 	@echo "Note: Also see the EXAMPLE section in the verilator manpage/document."
 
 ######################################################################

examples/make_hello_sc/sc_main.cpp

@@ -1,8 +1,9 @@
 // -*- SystemC -*-
 // DESCRIPTION: Verilator Example: Top level main for invoking SystemC model
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 //======================================================================
 
 // SystemC global header

examples/make_hello_sc/top.v

@@ -1,7 +1,8 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 
 // See also the EXAMPLE section in the verilator manpage/document.
 module top;

examples/make_protect_lib/.gitignore

@@ -0,0 +1,2 @@
+obj_*
+logs

examples/make_protect_lib/Makefile

@@ -0,0 +1,98 @@
+######################################################################
+#
+# DESCRIPTION: Verilator Example: --protect-lib Makefile
+#
+# This calls the object directory makefiles.  That allows the objects to
+# be placed in the "current directory" which simplifies the Makefile.
+#
+# Copyright 2019 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+# Check for sanity to avoid later confusion
+
+ifneq ($(words $(CURDIR)),1)
+ $(error Unsupported: GNU Make cannot build in directories containing spaces, build elsewhere: '$(CURDIR)')
+endif
+
+######################################################################
+# Set up variables
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR = verilator
+else
+export VERILATOR_ROOT
+VERILATOR = $(VERILATOR_ROOT)/bin/verilator
+endif
+
+VERILATOR_FLAGS =
+# Generate C++
+VERILATOR_FLAGS += -cc
+# Optimize
+VERILATOR_FLAGS += -Os -x-assign 0
+# Warn abount lint issues; may not want this on less solid designs
+VERILATOR_FLAGS += -Wall
+# Make waveforms
+TOP_VERILATOR_FLAGS = $(VERILATOR_FLAGS) --trace
+
+######################################################################
+default: run
+
+run:
+	@echo
+	@echo "-- Verilator --protect-lib example -_--------------------------"
+
+	@echo
+	@echo "-- VERILATE secret module -------------------------------------"
+	@echo " --protect-lib will produce both a static and shared library"
+	@echo " In this example the static library is used, but some"
+	@echo " simulators may require the shared library."
+	@echo "---------------------------------------------------------------"
+	$(VERILATOR) $(VERILATOR_FLAGS) --protect-lib verilated_secret -Mdir obj_dir_secret/ secret_impl.v
+
+	@echo
+	@echo "-- COMPILE protected library ----------------------------------"
+	@echo " This builds verilated_secret.sv, libverilated_secret.a and"
+	@echo " libverilated_secret.so which can be distributed apart from"
+	@echo " the source"
+	@echo "---------------------------------------------------------------"
+	$(MAKE) -j 4 -C obj_dir_secret -f Vsecret_impl.mk
+
+	@echo
+	@echo "-- VERILATE top module ----------------------------------------"
+	@echo " Use the SystemVerilog wrapper (verilated_secret.sv) and the"
+	@echo " library (libverilated_secret.a) generated from the previous"
+	@echo " step"
+	@echo "---------------------------------------------------------------"
+	$(VERILATOR) $(TOP_VERILATOR_FLAGS) --exe -LDFLAGS '-L../obj_dir_secret -lverilated_secret -static' top.v obj_dir_secret/verilated_secret.sv sim_main.cpp
+
+	@echo
+	@echo "-- COMPILE entire design --------------------------------------"
+	$(MAKE) -j 4 -C obj_dir -f Vtop.mk
+
+	@echo
+	@echo "-- RUN --------------------------------------------------------"
+	@mkdir -p logs
+	obj_dir/Vtop +trace
+
+	@echo
+	@echo "-- DONE -------------------------------------------------------"
+	@echo "To see waveforms, open logs/vlt_dump.vcd in a waveform viewer"
+	@echo
+
+
+######################################################################
+# Other targets
+
+show-config:
+	$(VERILATOR) -V
+
+maintainer-copy::
+clean mostlyclean distclean maintainer-clean::
+	-rm -rf obj_dir* logs *.log core

examples/make_protect_lib/secret_impl.v

@@ -0,0 +1,28 @@
+// DESCRIPTION: Verilator: --protect-lib example secret module
+//
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2019 by Todd Strader.
+// SPDX-License-Identifier: CC0-1.0
+
+// This module will be used as libsecret.a or libsecret.so without
+// exposing the source.
+module secret_impl(
+		   input [31:0]        a,
+		   input [31:0]        b,
+		   output logic [31:0] x,
+		   input 	       clk);
+
+   logic [31:0] 		       accum_q = 0;
+   logic [31:0] 		       secret_value = 9;
+
+   initial $display("%m: initialized");
+
+   always @(posedge clk) begin
+      accum_q <= accum_q + a;
+      if (accum_q > 10)
+        x <= b;
+      else
+        x <= a + b + secret_value;
+   end
+
+endmodule

examples/make_protect_lib/sim_main.cpp

@@ -0,0 +1,73 @@
+// DESCRIPTION: Verilator: --protect-lib example module
+//
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2019 by Todd Strader.
+// SPDX-License-Identifier: CC0-1.0
+//======================================================================
+
+// See examples/tracing_c for notes on tracing
+
+// Include common routines
+#include <verilated.h>
+
+#include "Vtop.h"
+
+#if VM_TRACE
+# include <verilated_vcd_c.h>
+#endif
+
+vluint64_t main_time = 0;
+double sc_time_stamp() {
+    return main_time;
+}
+
+int main(int argc, char** argv, char** env) {
+    if (0 && argc && argv && env) {}
+
+    Verilated::debug(0);
+    Verilated::randReset(2);
+    Verilated::commandArgs(argc, argv);
+
+    // Construct the Verilated model, including the secret module
+    Vtop* top = new Vtop;
+
+#if VM_TRACE
+    // When tracing, the contents of the secret module will not be seen
+    VerilatedVcdC* tfp = NULL;
+    const char* flag = Verilated::commandArgsPlusMatch("trace");
+    if (flag && 0==strcmp(flag, "+trace")) {
+        Verilated::traceEverOn(true);
+        VL_PRINTF("Enabling waves into logs/vlt_dump.vcd...\n");
+        tfp = new VerilatedVcdC;
+        top->trace(tfp, 99);
+        Verilated::mkdir("logs");
+        tfp->open("logs/vlt_dump.vcd");
+    }
+#endif
+
+    top->clk = 0;
+
+    // Simulate until $finish
+    while (!Verilated::gotFinish()) {
+        main_time++;
+        top->clk = ~top->clk & 0x1;
+        top->eval();
+#if VM_TRACE
+        if (tfp) tfp->dump(main_time);
+#endif
+    }
+
+    // Final model cleanup
+    top->final();
+
+    // Close trace if opened
+#if VM_TRACE
+    if (tfp) { tfp->close(); tfp = NULL; }
+#endif
+
+    // Destroy model
+    delete top; top = NULL;
+
+    // Fin
+    exit(0);
+}

examples/make_protect_lib/top.v

@@ -0,0 +1,35 @@
+// DESCRIPTION: Verilator: --protect-lib example module
+//
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2019 by Todd Strader.
+// SPDX-License-Identifier: CC0-1.0
+
+// See also the EXAMPLE section in the verilator manpage/document.
+module top (input clk);
+
+   integer cyc = 0;
+   logic [31:0] a = 0;
+   logic [31:0] b = 0;
+   logic [31:0] x;
+
+   verilated_secret secret (.a, .b, .x, .clk);
+
+   always @(posedge clk) begin
+      $display("[%0t] cyc=%0d a=%0d b=%0d x=%0d", $time, cyc, a, b, x);
+      cyc <= cyc + 1;
+      if (cyc == 0) begin
+         a <= 5;
+         b <= 7;
+      end else if (cyc == 1) begin
+         a <= 6;
+         b <= 2;
+      end else if (cyc == 2) begin
+         a <= 1;
+         b <= 9;
+      end else if (cyc > 3) begin
+         $display("Done");
+         $finish;
+      end
+   end
+
+endmodule

examples/make_tracing_c/Makefile

@@ -5,10 +5,11 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 ######################################################################
 # Check for sanity to avoid later confusion
@@ -21,7 +22,7 @@ endif
 # Set up variables
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator
@@ -38,7 +39,7 @@ VERILATOR_FLAGS += -cc --exe
 # Generate makefile dependencies (not shown as complicates the Makefile)
 #VERILATOR_FLAGS += -MMD
 # Optimize
-VERILATOR_FLAGS += -O2 -x-assign 0
+VERILATOR_FLAGS += -Os -x-assign 0
 # Warn abount lint issues; may not want this on less solid designs
 VERILATOR_FLAGS += -Wall
 # Make waveforms
@@ -52,6 +53,9 @@ VERILATOR_FLAGS += --coverage
 # Add this trace to get a backtrace in gdb
 #VERILATOR_FLAGS += --gdbbt
 
+# Input files for Verilator
+VERILATOR_INPUT = -f input.vc top.v sim_main.cpp
+
 ######################################################################
 default: run
 
@@ -61,7 +65,7 @@ run:
 
 	@echo
 	@echo "-- VERILATE ----------------"
-	$(VERILATOR) $(VERILATOR_FLAGS) -f input.vc top.v sim_main.cpp
+	$(VERILATOR) $(VERILATOR_FLAGS) $(VERILATOR_INPUT)
 
 	@echo
 	@echo "-- COMPILE -----------------"
@@ -72,11 +76,13 @@ run:
 
 	@echo
 	@echo "-- RUN ---------------------"
+	@rm -rf logs
 	@mkdir -p logs
 	obj_dir/Vtop +trace
 
 	@echo
 	@echo "-- COVERAGE ----------------"
+	@rm -rf logs/annotated
 	$(VERILATOR_COVERAGE) --annotate logs/annotated logs/coverage.dat
 
 	@echo

examples/make_tracing_c/Makefile_obj

@@ -5,10 +5,11 @@
 #
 # This is executed in the object directory, and called by ../Makefile
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 #######################################################################
 
@@ -38,7 +39,7 @@ endif
 # SystemC takes minutes to optimize, thus it is off by default.
 OPT_SLOW =
 # Fast path optimizations.  Most time is spent in these classes.
-OPT_FAST = -O2 -fstrict-aliasing
+OPT_FAST = -Os -fstrict-aliasing
 #OPT_FAST = -O
 #OPT_FAST =
 

examples/make_tracing_c/sim_main.cpp

@@ -1,7 +1,8 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 //======================================================================
 
 // Include common routines
@@ -10,11 +11,6 @@
 // Include model header, generated from Verilating "top.v"
 #include "Vtop.h"
 
-// If "verilator --trace" is used, include the tracing class
-#if VM_TRACE
-# include <verilated_vcd_c.h>
-#endif
-
 // Current simulation time (64-bit unsigned)
 vluint64_t main_time = 0;
 // Called by $time in Verilog
@@ -23,7 +19,7 @@ double sc_time_stamp() {
 }
 
 int main(int argc, char** argv, char** env) {
-    // This is a more complicated example, please also see the simpler examples/hello_world_c.
+    // This is a more complicated example, please also see the simpler examples/make_hello_c.
 
     // Prevent unused variable warnings
     if (0 && argc && argv && env) {}
@@ -36,31 +32,21 @@ int main(int argc, char** argv, char** env) {
     // May be overridden by commandArgs
     Verilated::randReset(2);
 
+    // Verilator must compute traced signals
+    Verilated::traceEverOn(true);
+
     // Pass arguments so Verilated code can see them, e.g. $value$plusargs
     // This needs to be called before you create any model
     Verilated::commandArgs(argc, argv);
 
+    // Create logs/ directory in case we have traces to put under it
+    Verilated::mkdir("logs");
+
     // Construct the Verilated model, from Vtop.h generated from Verilating "top.v"
     Vtop* top = new Vtop;  // Or use a const unique_ptr, or the VL_UNIQUE_PTR wrapper
 
-#if VM_TRACE
-    // If verilator was invoked with --trace argument,
-    // and if at run time passed the +trace argument, turn on tracing
-    VerilatedVcdC* tfp = NULL;
-    const char* flag = Verilated::commandArgsPlusMatch("trace");
-    if (flag && 0==strcmp(flag, "+trace")) {
-        Verilated::traceEverOn(true);  // Verilator must compute traced signals
-        VL_PRINTF("Enabling waves into logs/vlt_dump.vcd...\n");
-        tfp = new VerilatedVcdC;
-        top->trace(tfp, 99);  // Trace 99 levels of hierarchy
-        Verilated::mkdir("logs");
-        tfp->open("logs/vlt_dump.vcd");  // Open the dump file
-    }
-#endif
-
     // Set some inputs
     top->reset_l = !0;
-    top->fastclk = 0;
     top->clk = 0;
     top->in_small = 1;
     top->in_quad = 0x1234;
@@ -72,31 +58,29 @@ int main(int argc, char** argv, char** env) {
     while (!Verilated::gotFinish()) {
         main_time++;  // Time passes...
 
-        // Toggle clocks and such
-        top->fastclk = !top->fastclk;
-        if ((main_time % 10) == 3) {
-            top->clk = 1;
-        }
-        if ((main_time % 10) == 8) {
-            top->clk = 0;
-        }
-        if (main_time > 1 && main_time < 10) {
-            top->reset_l = !1;  // Assert reset
-        } else {
-            top->reset_l = !0;  // Deassert reset
-        }
+        // Toggle a fast (time/2 period) clock
+        top->clk = !top->clk;
 
-        // Assign some other inputs
-        top->in_quad += 0x12;
+        // Toggle control signals on an edge that doesn't correspond
+        // to where the controls are sampled; in this example we do
+        // this only on a negedge of clk, because we know
+        // reset is not sampled there.
+        if (!top->clk) {
+            if (main_time > 1 && main_time < 10) {
+                top->reset_l = !1;  // Assert reset
+            } else {
+                top->reset_l = !0;  // Deassert reset
+            }
+            // Assign some other inputs
+            top->in_quad += 0x12;
+        }
 
         // Evaluate model
+        // (If you have multiple models being simulated in the same
+        // timestep then instead of eval(), call eval_step() on each, then
+        // eval_end_step() on each.)
         top->eval();
 
-#if VM_TRACE
-        // Dump trace data for this cycle
-        if (tfp) tfp->dump(main_time);
-#endif
-
         // Read outputs
         VL_PRINTF("[%" VL_PRI64 "d] clk=%x rstl=%x iquad=%" VL_PRI64 "x"
                   " -> oquad=%" VL_PRI64"x owide=%x_%08x_%08x\n",
@@ -107,11 +91,6 @@ int main(int argc, char** argv, char** env) {
     // Final model cleanup
     top->final();
 
-    // Close trace if opened
-#if VM_TRACE
-    if (tfp) { tfp->close(); tfp = NULL; }
-#endif
-
     //  Coverage analysis (since test passed)
 #if VM_COVERAGE
     Verilated::mkdir("logs");

examples/make_tracing_c/sub.v

@@ -1,31 +1,17 @@
 // DESCRIPTION: Verilator: Verilog Test module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2003 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2003 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 // ======================================================================
 
 module sub
   (
    input clk,
-   input fastclk,
    input reset_l
    );
 
    // Example counter/flop
-   reg [31:0] count_f;
-   always_ff @ (posedge fastclk) begin
-      if (!reset_l) begin
-         /*AUTORESET*/
-         // Beginning of autoreset for uninitialized flops
-         count_f <= 32'h0;
-         // End of automatics
-      end
-      else begin
-         count_f <= count_f + 1;
-      end
-   end
-
-   // Another example flop
    reg [31:0] count_c;
    always_ff @ (posedge clk) begin
       if (!reset_l) begin
@@ -37,8 +23,6 @@ module sub
       else begin
          count_c <= count_c + 1;
          if (count_c >= 3) begin
-            $display("[%0t] fastclk is %0d times faster than clk\n",
-                     $time, count_f/count_c);
             // This write is a magic value the Makefile uses to make sure the
             // test completes successfully.
             $write("*-* All Finished *-*\n");

examples/make_tracing_c/top.v

@@ -1,41 +1,45 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2003 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2003 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 // ======================================================================
 
 // This is intended to be a complex example of several features, please also
-// see the simpler examples/hello_world_c.
+// see the simpler examples/make_hello_c.
 
 module top
   (
    // Declare some signals so we can see how I/O works
    input         clk,
-   input         fastclk,
    input         reset_l,
 
-   output [1:0]  out_small,
-   output [39:0] out_quad,
-   output [69:0] out_wide,
+   output wire [1:0]  out_small,
+   output wire [39:0] out_quad,
+   output wire [69:0] out_wide,
    input [1:0]   in_small,
    input [39:0]  in_quad,
    input [69:0]  in_wide
    );
 
    // Connect up the outputs, using some trivial logic
-   wire [1:0]    out_small = ~reset_l ? '0 : (in_small + 2'b1);
-   wire [39:0]   out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
-   wire [69:0]   out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
+   assign out_small = ~reset_l ? '0 : (in_small + 2'b1);
+   assign out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
+   assign out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
 
    // And an example sub module. The submodule will print stuff.
    sub sub (/*AUTOINST*/
             // Inputs
             .clk                        (clk),
-            .fastclk                    (fastclk),
             .reset_l                    (reset_l));
 
    // Print some stuff as an example
    initial begin
+      if ($test$plusargs("trace") != 0) begin
+         $display("[%0t] Tracing to logs/vlt_dump.vcd...\n", $time);
+         $dumpfile("logs/vlt_dump.vcd");
+         $dumpvars();
+      end
       $display("[%0t] Model running...\n", $time);
    end
 

examples/make_tracing_sc/Makefile

@@ -5,10 +5,11 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 ######################################################################
 # Check for sanity to avoid later confusion
@@ -21,7 +22,7 @@ endif
 # Set up variables
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator
@@ -38,7 +39,7 @@ VERILATOR_FLAGS += -sc --exe
 # Generate makefile dependencies (not shown as complicates the Makefile)
 #VERILATOR_FLAGS += -MMD
 # Optimize
-VERILATOR_FLAGS += -O2 -x-assign 0
+VERILATOR_FLAGS += -Os -x-assign 0
 # Warn abount lint issues; may not want this on less solid designs
 VERILATOR_FLAGS += -Wall
 # Make waveforms
@@ -52,6 +53,9 @@ VERILATOR_FLAGS += --coverage
 # Add this trace to get a backtrace in gdb
 #VERILATOR_FLAGS += --gdbbt
 
+# Input files for Verilator
+VERILATOR_INPUT = -f input.vc top.v sc_main.cpp
+
 # Check if SC exists via a verilator call (empty if not)
 SYSTEMC_EXISTS := $(shell $(VERILATOR) --getenv SYSTEMC_INCLUDE)
 
@@ -69,10 +73,10 @@ run:
 
 	@echo
 	@echo "-- VERILATE ----------------"
-	$(VERILATOR) $(VERILATOR_FLAGS) -f input.vc top.v sc_main.cpp
+	$(VERILATOR) $(VERILATOR_FLAGS) $(VERILATOR_INPUT)
 
 	@echo
-	@echo "-- COMPILE ----------------="
+	@echo "-- COMPILE -----------------"
 # To compile, we can either just do what Verilator asks,
 # or call a submakefile where we can override the rules ourselves
 #	$(MAKE) -j 4 -C obj_dir -f Vtop.mk
@@ -80,11 +84,13 @@ run:
 
 	@echo
 	@echo "-- RUN ---------------------"
+	@rm -rf logs
 	@mkdir -p logs
 	obj_dir/Vtop +trace
 
 	@echo
 	@echo "-- COVERAGE ----------------"
+	@rm -rf logs/annotated
 	$(VERILATOR_COVERAGE) --annotate logs/annotated logs/coverage.dat
 
 	@echo
@@ -92,6 +98,7 @@ run:
 	@echo "To see waveforms, open vlt_dump.vcd in a waveform viewer"
 	@echo
 
+
 ######################################################################
 # Other targets
 

examples/make_tracing_sc/Makefile_obj

@@ -5,10 +5,11 @@
 #
 # This is executed in the object directory, and called by ../Makefile
 #
-# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
-# redistribute it and/or modify it under the terms of either the GNU
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
 #
 #######################################################################
 
@@ -46,7 +47,7 @@ endif
 # SystemC takes minutes to optimize, thus it is off by default.
 OPT_SLOW =
 # Fast path optimizations.  Most time is spent in these classes.
-OPT_FAST = -O2 -fstrict-aliasing
+OPT_FAST = -Os -fstrict-aliasing
 #OPT_FAST = -O
 #OPT_FAST =
 

examples/make_tracing_sc/sc_main.cpp

@@ -1,8 +1,9 @@
 // -*- SystemC -*-
 // DESCRIPTION: Verilator Example: Top level main for invoking SystemC model
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2017 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2017 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 //======================================================================
 
 // SystemC global header
@@ -20,7 +21,7 @@
 #include "Vtop.h"
 
 int sc_main(int argc, char* argv[]) {
-    // This is a more complicated example, please also see the simpler examples/hello_world_c.
+    // This is a more complicated example, please also see the simpler examples/make_hello_c.
 
     // Prevent unused variable warnings
     if (0 && argc && argv) {}
@@ -37,6 +38,9 @@ int sc_main(int argc, char* argv[]) {
     // This needs to be called before you create any model
     Verilated::commandArgs(argc, argv);
 
+    // Create logs/ directory in case we have traces to put under it
+    Verilated::mkdir("logs");
+
     // General logfile
     ios::sync_with_stdio();
 

examples/make_tracing_sc/sub.v

@@ -1,7 +1,8 @@
 // DESCRIPTION: Verilator: Verilog Test module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2003 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2003 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 // ======================================================================
 
 module sub

examples/make_tracing_sc/top.v

@@ -1,11 +1,12 @@
 // DESCRIPTION: Verilator: Verilog example module
 //
-// This file ONLY is placed into the Public Domain, for any use,
-// without warranty, 2003 by Wilson Snyder.
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2003 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
 // ======================================================================
 
 // This is intended to be a complex example of several features, please also
-// see the simpler examples/hello_world_c.
+// see the simpler examples/make_hello_c.
 
 module top
   (
@@ -14,18 +15,18 @@ module top
    input         fastclk,
    input         reset_l,
 
-   output [1:0]  out_small,
-   output [39:0] out_quad,
-   output [69:0] out_wide,
+   output wire [1:0]  out_small,
+   output wire [39:0] out_quad,
+   output wire [69:0] out_wide,
    input [1:0]   in_small,
    input [39:0]  in_quad,
    input [69:0]  in_wide
    );
 
    // Connect up the outputs, using some trivial logic
-   wire [1:0]    out_small = ~reset_l ? '0 : (in_small + 2'b1);
-   wire [39:0]   out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
-   wire [69:0]   out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
+   assign out_small = ~reset_l ? '0 : (in_small + 2'b1);
+   assign out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
+   assign out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
 
    // And an example sub module. The submodule will print stuff.
    sub sub (/*AUTOINST*/

examples/xml_py/.gitignore

@@ -0,0 +1,6 @@
+obj_*
+copied
+*.csv
+*.dot
+*.dmp
+*.pdf

examples/xml_py/Makefile

@@ -0,0 +1,63 @@
+######################################################################
+#
+# DESCRIPTION: Verilator Example: XML tests
+#
+# Copyright 2003-2020 by Wilson Snyder. This program is free software; you
+# can redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+# SPDX-License-Identifier: LGPL-3.0-only OR Artistic-2.0
+#
+######################################################################
+
+# This makefile is not intended to be useful as an example itself,
+# it is just to run the small example scripts in this directory.
+
+# If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
+# package install, and verilator is in your path. Otherwise find the
+# binary relative to $VERILATOR_ROOT (such as when inside the git sources).
+ifeq ($(VERILATOR_ROOT),)
+VERILATOR = verilator
+else
+export VERILATOR_ROOT
+VERILATOR = $(VERILATOR_ROOT)/bin/verilator
+endif
+
+DOT = dot
+PYTHON = python3
+
+PYTHON_VERSION := $(shell ${PYTHON} --version 2>&1)
+PYTHON_VERSION_FULL := $(wordlist 2,4,$(subst ., ,${PYTHON_VERSION}))
+PYTHON_VERSION_MAJOR := $(word 1,${PYTHON_VERSION_FULL})
+PYTHON_VERSION_MINOR := $(word 2,${PYTHON_VERSION_FULL})
+PYTHON_GE_3_5 := $(shell [ ${PYTHON_VERSION_MAJOR} -eq 3 -a ${PYTHON_VERSION_MINOR} -ge 5 ] && echo true)
+
+ifeq (${PYTHON_GE_3_5},true)
+default: test
+else
+default: python_message
+endif
+
+python_message:
+	@echo "Found Python version ${PYTHON_VERSION}, but require >= 3.5"
+
+test: \
+	test-vl_file_copy \
+	test-vl_hier_graph \
+
+test-vl_file_copy:
+	@echo "-- vl_file_copy example"
+	$(PYTHON) vl_file_copy -odir copied top.v
+	@cmp copied/top.v top.v
+	@cmp copied/sub.v sub.v
+
+test-vl_hier_graph:
+	@echo "-- vl_hier_graph example"
+	$(PYTHON) vl_hier_graph -o graph.dot top.v
+	@echo "Manually run: " $(DOT) -Tpdf -o graph.pdf graph.dot
+
+######################################################################
+
+maintainer-copy::
+clean mostlyclean distclean maintainer-clean::
+	-rm -rf obj_dir *.log *.csv *.dmp *.dot *.vpd *.pdf core copied

examples/xml_py/sub.v

@@ -0,0 +1,18 @@
+// DESCRIPTION: Verilator: Verilog Test module
+//
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2019 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
+// ======================================================================
+
+module sub
+  #(parameter type TYPE_t = logic)
+   (
+    input TYPE_t in,
+    output TYPE_t out
+    );
+
+   // Some simple logic
+   always_comb out = ~ in;
+
+endmodule

examples/xml_py/top.v

@@ -0,0 +1,33 @@
+// DESCRIPTION: Verilator: Verilog example module
+//
+// This file ONLY is placed under the Creative Commons Public Domain, for
+// any use, without warranty, 2019 by Wilson Snyder.
+// SPDX-License-Identifier: CC0-1.0
+// ======================================================================
+
+module top
+  (
+   input         clk,
+   input         fastclk,
+   input         reset_l,
+
+   output wire [1:0]  out_small,
+   output wire [39:0] out_quad,
+   output wire [69:0] out_wide,
+   input [1:0]   in_small,
+   input [39:0]  in_quad,
+   input [69:0]  in_wide
+   );
+
+   sub #(.TYPE_t(logic [1:0])) sub_small
+     (.in(in_small),
+      .out(out_small));
+
+   sub #(.TYPE_t(logic [39:0])) sub_quad
+     (.in(in_quad),
+      .out(out_quad));
+
+   sub #(.TYPE_t(logic [69:0])) sub_wide
+     (.in(in_wide),
+      .out(out_wide));
+endmodule

examples/xml_py/vl_file_copy

@@ -0,0 +1,114 @@
+#!/usr/bin/env python3
+# -*- Python -*- See copyright, etc below
+######################################################################
+
+import argparse
+import os
+import re
+import subprocess
+import sys
+import tempfile
+import xml.etree.ElementTree as ET
+from shutil import copy2
+from pprint import pprint,pformat
+
+#######################################################################
+
+class VlFileCopy:
+    def __init__(self,
+                 verilator_args,  # presently all verilator options are passed-thru
+                 # ideally this script would check against options mentioned in help
+                 debug=0,
+                 output_dir='copied'):  # directory name we output file uses
+        self.debug = debug
+
+        xml_temp = tempfile.NamedTemporaryFile()
+
+        args = ['--xml-output', xml_temp.name,
+                '--bbox-sys',  # Parse some stuff can't translate
+                '--bbox-unsup',
+                '--prefix vlxml']  # So we know name of .xml output
+        args += verilator_args
+        self.run_verilator(args)
+        self.tree = ET.parse(xml_temp.name)
+
+        os.makedirs(output_dir, 0o777, True)
+
+        # Find and copy the files
+        root = self.tree.getroot()
+        xfiles = root.find('files')
+        for xfile in xfiles.findall('file'):
+            filename = xfile.get('filename')
+            if not re.match('^<', filename):  # e.g. <built-in>
+                if self.debug:
+                    print("\tcp %s %s" % (filename, output_dir))
+                copy2(filename, output_dir)
+
+    def run_verilator(self, args):
+        """Run Verilator command, check errors"""
+        if os.getenv("VERILATOR_ROOT"):
+            command = os.getenv("VERILATOR_ROOT") + "/bin/verilator"
+        else:
+            command = "verilator"
+        command += ' ' + ' '.join(args)
+        if self.debug:
+            print("\t%s " % command)
+        status = subprocess.call(command, shell=True)
+        if status != 0:
+            raise Exception("Command failed running Verilator with '"+command+"', stopped")
+
+#######################################################################
+
+if __name__=='__main__':
+    parser = argparse.ArgumentParser(
+        allow_abbrev=False,
+        formatter_class=argparse.RawTextHelpFormatter,
+        description=
+"""Example of using Verilator XML output to copy a list of files to an
+output directory (-odir, defaults to 'copied'), e.g. to easily create a
+tarball of the design to pass to others.
+
+Example usage:
+     vl_file_copy -f input.vc top.v -odir mycopy
+     # This will make at least mycopy/top.v
+""",
+        epilog=
+"""All other arguments are pass-thru to Verilator: e.g.:
+
+  +define+<var>=<value>      Set preprocessor define
+  -F <file>                  Parse options from a file, relatively
+  -f <file>                  Parse options from a file
+  -G<name>=<value>           Overwrite toplevel parameter
+  +incdir+<dir>              Directory to search for includes
+  +libext+<ext>+[ext]...     Extensions for finding modules
+  -v <filename>              Verilog library
+  -y <dir>                   Directory to search for modules
+
+This file ONLY is placed under the Creative Commons Public Domain, for
+any use, without warranty, 2019 by Wilson Snyder.
+SPDX-License-Identifier: CC0-1.0
+"""
+    )
+    parser.add_argument('-debug', '--debug',
+                        action='store_const', const=9,
+                        help='enable debug')
+    parser.add_argument('-odir', '--odir',
+                        action='store', metavar='directory', required=True,
+                        help='target output directory')
+    (args, rem) = parser.parse_known_args()
+
+    print("NOTE: vl_file_copy is only an example starting point for writing your own tool.")
+    # That is:
+    # 1. We will accept basic patches
+    # 2. We are not expecting to make this globally useful. (e.g. we don't cleanup obj_dir)
+    # 3. "make install" will not install this.
+    # 4. This has not had production-worthy validation.
+
+    fc = VlFileCopy(output_dir = args.odir,
+                    debug = args.debug,
+                    verilator_args = rem)
+
+######################################################################
+### Local Variables:
+### compile-command: "./vl_file_copy -h ; VERILATOR_ROOT=$V4 ./vl_file_copy +define+thru top.v"
+### End:

examples/xml_py/vl_hier_graph

@@ -0,0 +1,138 @@
+#!/usr/bin/env python3
+# -*- Python -*- See copyright, etc below
+######################################################################
+
+import argparse
+import os
+import re
+import subprocess
+import sys
+import tempfile
+import xml.etree.ElementTree as ET
+from shutil import copy2
+from pprint import pprint,pformat
+
+#######################################################################
+
+class VlHierGraph:
+    def __init__(self,
+                 verilator_args,  # presently all verilator options are passed-thru
+                 # ideally this script would check against options mentioned in help
+                 debug=0,
+                 output_filename='graph.dot'):  # output filename
+        self.debug = debug
+        self.next_vertex_number = 0
+        self.name_to_number = {}
+
+        xml_temp = tempfile.NamedTemporaryFile()
+
+        args = ['--xml-output', xml_temp.name,
+                '--bbox-sys',  # Parse some stuff can't translate
+                '--bbox-unsup',
+                '--prefix vlxml']  # So we know name of .xml output
+        args += verilator_args
+        self.run_verilator(args)
+        self.tree = ET.parse(xml_temp.name)
+
+        with open(output_filename, "w") as fh:
+            # For more serious purposes, use the python graphviz package instead
+            fh.write("digraph {\n")
+            fh.write("  dpi=300;\n")
+            fh.write("  order=LR;\n")
+            fh.write("  node [fontsize=8 shape=\"box\" margin=0.01 width=0 height=0]")
+            fh.write("  edge [fontsize=6]")
+            # Find cells
+            root = self.tree.getroot()
+            netlist = root.find('netlist')
+            for module in netlist.findall('module'):
+                # origNames are before parameterization, name if after
+                mod_name = module.get('name')
+                mod_number = self.name_to_vertex_number(mod_name)
+                fh.write("  n%d [label=\"%s\""
+                         % (mod_number, mod_name))
+                if module.get('topModule'):
+                    fh.write(" color=\"red\" rank=1")
+                fh.write("];\n")
+
+                for instance in module.findall('instance'):
+                    inst_name = instance.get('name')
+                    def_name = instance.get('defName')
+                    def_number = self.name_to_vertex_number(def_name)
+                    fh.write("  n%d->n%d [label=\"%s\"];\n"
+                             % (mod_number, def_number, inst_name));
+
+            fh.write("}\n")
+
+    def name_to_vertex_number(self, name):
+        if not name in self.name_to_number:
+            self.next_vertex_number += 1
+            self.name_to_number[name] = self.next_vertex_number
+        return self.name_to_number[name]
+
+    def run_verilator(self, args):
+        """Run Verilator command, check errors"""
+        if os.getenv("VERILATOR_ROOT"):
+            command = os.getenv("VERILATOR_ROOT") + "/bin/verilator"
+        else:
+            command = "verilator"
+        command += ' ' + ' '.join(args)
+        if self.debug:
+            print("\t%s " % command)
+        status = subprocess.call(command, shell=True)
+        if status != 0:
+            raise Exception("Command failed running Verilator with '"+command+"', stopped")
+
+#######################################################################
+
+if __name__=='__main__':
+    parser = argparse.ArgumentParser(
+        allow_abbrev=False,
+        formatter_class=argparse.RawTextHelpFormatter,
+        description=
+"""Example of using Verilator XML output to create a .dot file showing the
+design module hierarchy.
+
+Example usage:
+     vl_hier_graph -f input.vc top.v -o graph.dot
+     dot -Tpdf -o graph.pdf graph.dot
+""",
+        epilog=
+"""All other arguments are pass-thru to Verilator: e.g.:
+
+  +define+<var>=<value>      Set preprocessor define
+  -F <file>                  Parse options from a file, relatively
+  -f <file>                  Parse options from a file
+  -G<name>=<value>           Overwrite toplevel parameter
+  +incdir+<dir>              Directory to search for includes
+  +libext+<ext>+[ext]...     Extensions for finding modules
+  -v <filename>              Verilog library
+  -y <dir>                   Directory to search for modules
+
+This file ONLY is placed under the Creative Commons Public Domain, for
+any use, without warranty, 2019 by Wilson Snyder.
+SPDX-License-Identifier: CC0-1.0
+"""
+    )
+    parser.add_argument('-debug', '--debug',
+                        action='store_const', const=9,
+                        help='enable debug')
+    parser.add_argument('-o', '--o',
+                        action='store', metavar='filename', required=True,
+                        help='output filename')
+    (args, rem) = parser.parse_known_args()
+
+    print("NOTE: vl_hier_graph is only an example starting point for writing your own tool.")
+    # That is:
+    # 1. We will accept basic patches
+    # 2. We are not expecting to make this globally useful. (e.g. we don't cleanup obj_dir)
+    # 3. "make install" will not install this.
+    # 4. This has not had production-worthy validation.
+
+    fc = VlHierGraph(output_filename = args.o,
+                     debug = args.debug,
+                     verilator_args = rem)
+
+######################################################################
+### Local Variables:
+### compile-command: "./vl_hier_graph -h ; VERILATOR_ROOT=$V4 ./vl_hier_graph +define+thru top.v"
+### End:

include/gtkwave/fastlz.c

@@ -22,6 +22,8 @@
   LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
   THE SOFTWARE.
+
+  SPDX-License-Identifier: MIT
 */
 
 #include "fastlz.h"

include/gtkwave/fastlz.h

@@ -22,6 +22,8 @@
   LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
   OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
   THE SOFTWARE.
+
+  SPDX-License-Identifier: MIT
 */
 
 #ifndef FASTLZ_H

include/gtkwave/fstapi.c

@@ -18,6 +18,8 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  * DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: MIT
  */
 
 /*
@@ -37,13 +39,15 @@
  *
  */
 
-// Verilator: use hardcoded config file
-//#include <config.h>
-#include "fst_config.h"
+#ifndef FST_CONFIG_INCLUDE
+# define FST_CONFIG_INCLUDE <config.h>
+#endif
+#include FST_CONFIG_INCLUDE
 
 #include "fstapi.h"
 #include "fastlz.h"
 #include "lz4.h"
+#include <errno.h>
 
 #ifndef HAVE_LIBPTHREAD
 #undef FST_WRITER_PARALLEL
@@ -130,6 +134,16 @@ void **JenkinsIns(void *base_i, const unsigned char *mem, uint32_t length, uint3
 #include <sys/sysctl.h>
 #endif
 
+#ifdef __GNUC__
+/* Boolean expression more often true than false */
+#define FST_LIKELY(x) __builtin_expect(!!(x), 1)
+/* Boolean expression more often false than true */
+#define FST_UNLIKELY(x) __builtin_expect(!!(x), 0)
+#else
+#define FST_LIKELY(x) (!!(x))
+#define FST_UNLIKELY(x) (!!(x))
+#endif
+
 #define FST_APIMESS "FSTAPI  | "
 
 /***********************/
@@ -725,6 +739,9 @@ off_t hier_file_len;
 uint32_t *valpos_mem;
 unsigned char *curval_mem;
 
+unsigned char *outval_mem; /* for two-state / Verilator-style value changes */
+uint32_t outval_alloc_siz;
+
 char *filename;
 
 fstHandle maxhandle;
@@ -954,6 +971,19 @@ fflush(xc->handle);
 /*
  * mmap functions
  */
+static void fstWriterMmapSanity(void *pnt, const char *file, int line, const char *usage)
+{
+#if !defined(__CYGWIN__) && !defined(__MINGW32__)
+if(pnt == MAP_FAILED)
+	{
+	fprintf(stderr, "fstMmap() assigned to %s failed: errno: %d, file %s, line %d.\n", usage, errno, file, line);
+	perror("Why");
+	pnt = NULL;
+	}
+#endif
+}
+
+
 static void fstWriterCreateMmaps(struct fstWriterContext *xc)
 {
 off_t curpos = ftello(xc->handle);
@@ -976,19 +1006,29 @@ fflush(xc->handle);
 if(!xc->valpos_mem)
         {
         fflush(xc->valpos_handle);
-        xc->valpos_mem = (uint32_t *)fstMmap(NULL, xc->maxhandle * 4 * sizeof(uint32_t), PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->valpos_handle), 0);
+	errno = 0;
+	if(xc->maxhandle)
+		{
+	        fstWriterMmapSanity(xc->valpos_mem = (uint32_t *)fstMmap(NULL, xc->maxhandle * 4 * sizeof(uint32_t), PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->valpos_handle), 0), __FILE__, __LINE__, "xc->valpos_mem");
+		}
         }
 if(!xc->curval_mem)
         {
         fflush(xc->curval_handle);
-        xc->curval_mem = (unsigned char *)fstMmap(NULL, xc->maxvalpos, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->curval_handle), 0);
+	errno = 0;
+	if(xc->maxvalpos)
+		{
+	        fstWriterMmapSanity(xc->curval_mem = (unsigned char *)fstMmap(NULL, xc->maxvalpos, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->curval_handle), 0), __FILE__, __LINE__, "xc->curval_handle");
+		}
         }
 }
 
 
 static void fstDestroyMmaps(struct fstWriterContext *xc, int is_closing)
 {
+#if !defined __CYGWIN__ && !defined __MINGW32__
 (void)is_closing;
+#endif
 
 fstMunmap(xc->valpos_mem, xc->maxhandle * 4 * sizeof(uint32_t));
 xc->valpos_mem = NULL;
@@ -1684,7 +1724,8 @@ fflush(xc->tchn_handle);
 tlen = ftello(xc->tchn_handle);
 fstWriterFseeko(xc, xc->tchn_handle, 0, SEEK_SET);
 
-tmem = (unsigned char *)fstMmap(NULL, tlen, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->tchn_handle), 0);
+errno = 0;
+fstWriterMmapSanity(tmem = (unsigned char *)fstMmap(NULL, tlen, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->tchn_handle), 0), __FILE__, __LINE__, "tmem");
 if(tmem)
         {
         unsigned long destlen = tlen;
@@ -1876,7 +1917,7 @@ if(xc)
 
 if(xc && !xc->already_in_close && !xc->already_in_flush)
         {
-        unsigned char *tmem;
+        unsigned char *tmem = NULL;
         off_t fixup_offs, tlen, hlen;
 
         xc->already_in_close = 1; /* never need to zero this out as it is freed at bottom */
@@ -1892,7 +1933,7 @@ if(xc && !xc->already_in_close && !xc->already_in_flush)
                 xc->skip_writing_section_hdr = 1;
                 if(!xc->size_limit_locked)
                         {
-                        if(xc->is_initial_time) /* simulation time never advanced so mock up the changes as time zero ones */
+                        if(FST_UNLIKELY(xc->is_initial_time)) /* simulation time never advanced so mock up the changes as time zero ones */
                                 {
                                 fstHandle dupe_idx;
 
@@ -1910,11 +1951,21 @@ if(xc && !xc->already_in_close && !xc->already_in_flush)
                         }
                 }
         fstDestroyMmaps(xc, 1);
+	if(xc->outval_mem)
+		{
+		free(xc->outval_mem); xc->outval_mem = NULL;
+		xc->outval_alloc_siz = 0;
+		}
 
         /* write out geom section */
         fflush(xc->geom_handle);
         tlen = ftello(xc->geom_handle);
-        tmem = (unsigned char *)fstMmap(NULL, tlen, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->geom_handle), 0);
+	errno = 0;
+	if(tlen)
+		{
+	        fstWriterMmapSanity(tmem = (unsigned char *)fstMmap(NULL, tlen, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->geom_handle), 0), __FILE__, __LINE__, "tmem");
+		}
+
         if(tmem)
                 {
                 unsigned long destlen = tlen;
@@ -2022,14 +2073,18 @@ if(xc && !xc->already_in_close && !xc->already_in_flush)
                         {
                         int lz4_maxlen;
                         unsigned char *mem;
-                        unsigned char *hmem;
+                        unsigned char *hmem = NULL;
                         int packed_len;
 
                         fflush(xc->handle);
 
                         lz4_maxlen = LZ4_compressBound(xc->hier_file_len);
                         mem = (unsigned char *)malloc(lz4_maxlen);
-                        hmem = (unsigned char *)fstMmap(NULL, xc->hier_file_len, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->hier_handle), 0);
+			errno = 0;
+			if(xc->hier_file_len)
+				{
+	                        fstWriterMmapSanity(hmem = (unsigned char *)fstMmap(NULL, xc->hier_file_len, PROT_READ|PROT_WRITE, MAP_SHARED, fileno(xc->hier_handle), 0), __FILE__, __LINE__, "hmem");
+				}
                         packed_len = LZ4_compress((char *)hmem, (char *)mem, xc->hier_file_len);
                         fstMunmap(hmem, xc->hier_file_len);
 
@@ -2845,12 +2900,12 @@ const unsigned char *buf = (const unsigned char *)val;
 uint32_t offs;
 int len;
 
-if((xc) && (handle <= xc->maxhandle))
+if(FST_LIKELY((xc) && (handle <= xc->maxhandle)))
         {
         uint32_t fpos;
         uint32_t *vm4ip;
 
-        if(!xc->valpos_mem)
+        if(FST_UNLIKELY(!xc->valpos_mem))
                 {
                 xc->vc_emitted = 1;
                 fstWriterCreateMmaps(xc);
@@ -2860,17 +2915,17 @@ if((xc) && (handle <= xc->maxhandle))
         vm4ip = &(xc->valpos_mem[4*handle]);
 
         len  = vm4ip[1];
-        if(len) /* len of zero = variable length, use fstWriterEmitVariableLengthValueChange */
+        if(FST_LIKELY(len)) /* len of zero = variable length, use fstWriterEmitVariableLengthValueChange */
                 {
-                if(!xc->is_initial_time)
+                if(FST_LIKELY(!xc->is_initial_time))
                         {
                         fpos = xc->vchg_siz;
 
-                        if((fpos + len + 10) > xc->vchg_alloc_siz)
+                        if(FST_UNLIKELY((fpos + len + 10) > xc->vchg_alloc_siz))
                                 {
                                 xc->vchg_alloc_siz += (xc->fst_break_add_size + len); /* +len added in the case of extremely long vectors and small break add sizes */
                                 xc->vchg_mem = (unsigned char *)realloc(xc->vchg_mem, xc->vchg_alloc_siz);
-                                if(!xc->vchg_mem)
+                                if(FST_UNLIKELY(!xc->vchg_mem))
                                         {
                                         fprintf(stderr, FST_APIMESS "Could not realloc() in fstWriterEmitValueChange, exiting.\n");
                                         exit(255);
@@ -2955,18 +3010,139 @@ if((xc) && (handle <= xc->maxhandle))
         }
 }
 
+void fstWriterEmitValueChange32(void *ctx, fstHandle handle,
+                                uint32_t bits, uint32_t val) {
+        char buf[32];
+        char *s = buf;
+        uint32_t i;
+        for (i = 0; i < bits; ++i)
+        {
+                *s++ = '0' + ((val >> (bits - i - 1)) & 1);
+        }
+        fstWriterEmitValueChange(ctx, handle, buf);
+}
+void fstWriterEmitValueChange64(void *ctx, fstHandle handle,
+                                uint32_t bits, uint64_t val) {
+        char buf[64];
+        char *s = buf;
+        uint32_t i;
+        for (i = 0; i < bits; ++i)
+        {
+                *s++ = '0' + ((val >> (bits - i - 1)) & 1);
+        }
+        fstWriterEmitValueChange(ctx, handle, buf);
+}
+void fstWriterEmitValueChangeVec32(void *ctx, fstHandle handle,
+                                   uint32_t bits, const uint32_t *val) {
+        struct fstWriterContext *xc = (struct fstWriterContext *)ctx;
+        if (FST_UNLIKELY(bits <= 32))
+        {
+                fstWriterEmitValueChange32(ctx, handle, bits, val[0]);
+        }
+        else if(FST_LIKELY(xc))
+        {
+                int bq = bits / 32;
+                int br = bits & 31;
+                int i;
+                int w;
+                uint32_t v;
+                unsigned char* s;
+                if (FST_UNLIKELY(bits > xc->outval_alloc_siz))
+                {
+                        xc->outval_alloc_siz = bits*2 + 1;
+                        xc->outval_mem = (unsigned char*)realloc(xc->outval_mem, xc->outval_alloc_siz);
+                        if (FST_UNLIKELY(!xc->outval_mem))
+                        {
+                                fprintf(stderr,
+                                        FST_APIMESS "Could not realloc() in fstWriterEmitValueChangeVec32, exiting.\n");
+                                exit(255);
+                        }
+                }
+                s = xc->outval_mem;
+                {
+                        w = bq;
+                        v = val[w];
+                        for (i = 0; i < br; ++i)
+                        {
+                                *s++ = '0' + ((v >> (br - i - 1)) & 1);
+                        }
+                }
+                for (w = bq - 1; w >= 0; --w)
+                {
+                        v = val[w];
+                        for (i = (32 - 4); i >= 0; i -= 4) {
+                                s[0] = '0' + ((v >> (i + 3)) & 1);
+                                s[1] = '0' + ((v >> (i + 2)) & 1);
+                                s[2] = '0' + ((v >> (i + 1)) & 1);
+                                s[3] = '0' + ((v >> (i + 0)) & 1);
+                                s += 4;
+                        }
+                }
+                fstWriterEmitValueChange(ctx, handle, xc->outval_mem);
+        }
+}
+void fstWriterEmitValueChangeVec64(void *ctx, fstHandle handle,
+                                   uint32_t bits, const uint64_t *val) {
+        struct fstWriterContext *xc = (struct fstWriterContext *)ctx;
+        if (FST_UNLIKELY(bits <= 64))
+        {
+                fstWriterEmitValueChange64(ctx, handle, bits, val[0]);
+        }
+        else if(FST_LIKELY(xc))
+        {
+                int bq = bits / 64;
+                int br = bits & 63;
+                int i;
+                int w;
+                uint32_t v;
+                unsigned char* s;
+                if (FST_UNLIKELY(bits > xc->outval_alloc_siz))
+                {
+                        xc->outval_alloc_siz = bits*2 + 1;
+                        xc->outval_mem = (unsigned char*)realloc(xc->outval_mem, xc->outval_alloc_siz);
+                        if (FST_UNLIKELY(!xc->outval_mem))
+                        {
+                                fprintf(stderr,
+                                        FST_APIMESS "Could not realloc() in fstWriterEmitValueChangeVec64, exiting.\n");
+                                exit(255);
+                        }
+                }
+                s = xc->outval_mem;
+                {
+                        w = bq;
+                        v = val[w];
+                        for (i = 0; i < br; ++i)
+                        {
+                                *s++ = '0' + ((v >> (br - i - 1)) & 1);
+                        }
+                }
+                for (w = bq - 1; w >= 0; --w) {
+                        v = val[w];
+                        for (i = (64 - 4); i >= 0; i -= 4)
+                        {
+                                s[0] = '0' + ((v >> (i + 3)) & 1);
+                                s[1] = '0' + ((v >> (i + 2)) & 1);
+                                s[2] = '0' + ((v >> (i + 1)) & 1);
+                                s[3] = '0' + ((v >> (i + 0)) & 1);
+                                s += 4;
+                        }
+                }
+                fstWriterEmitValueChange(ctx, handle, xc->outval_mem);
+        }
+}
+
 
 void fstWriterEmitVariableLengthValueChange(void *ctx, fstHandle handle, const void *val, uint32_t len)
 {
 struct fstWriterContext *xc = (struct fstWriterContext *)ctx;
 const unsigned char *buf = (const unsigned char *)val;
 
-if((xc) && (handle <= xc->maxhandle))
+if(FST_LIKELY((xc) && (handle <= xc->maxhandle)))
         {
         uint32_t fpos;
         uint32_t *vm4ip;
 
-        if(!xc->valpos_mem)
+        if(FST_UNLIKELY(!xc->valpos_mem))
                 {
                 xc->vc_emitted = 1;
                 fstWriterCreateMmaps(xc);
@@ -2976,15 +3152,15 @@ if((xc) && (handle <= xc->maxhandle))
         vm4ip = &(xc->valpos_mem[4*handle]);
 
         /* there is no initial time dump for variable length value changes */
-        if(!vm4ip[1]) /* len of zero = variable length */
+        if(FST_LIKELY(!vm4ip[1])) /* len of zero = variable length */
                 {
                 fpos = xc->vchg_siz;
 
-                if((fpos + len + 10 + 5) > xc->vchg_alloc_siz)
+                if(FST_UNLIKELY((fpos + len + 10 + 5) > xc->vchg_alloc_siz))
                         {
                         xc->vchg_alloc_siz += (xc->fst_break_add_size + len + 5); /* +len added in the case of extremely long vectors and small break add sizes */
                         xc->vchg_mem = (unsigned char *)realloc(xc->vchg_mem, xc->vchg_alloc_siz);
-                        if(!xc->vchg_mem)
+                        if(FST_UNLIKELY(!xc->vchg_mem))
                                 {
                                 fprintf(stderr, FST_APIMESS "Could not realloc() in fstWriterEmitVariableLengthValueChange, exiting.\n");
                                 exit(255);
@@ -3006,7 +3182,7 @@ unsigned int i;
 int skip = 0;
 if(xc)
         {
-        if(xc->is_initial_time)
+        if(FST_UNLIKELY(xc->is_initial_time))
                 {
                 if(xc->size_limit_locked)       /* this resets xc->is_initial_time to one */
                         {

include/gtkwave/fstapi.h

@@ -18,6 +18,8 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  * DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: MIT
  */
 
 #ifndef FST_API_H
@@ -355,6 +357,14 @@ fstHandle       fstWriterCreateVar2(void *ctx, enum fstVarType vt, enum fstVarDi
 void            fstWriterEmitDumpActive(void *ctx, int enable);
 void 		fstWriterEmitEnumTableRef(void *ctx, fstEnumHandle handle);
 void            fstWriterEmitValueChange(void *ctx, fstHandle handle, const void *val);
+void            fstWriterEmitValueChange32(void *ctx, fstHandle handle,
+                        uint32_t bits, uint32_t val);
+void            fstWriterEmitValueChange64(void *ctx, fstHandle handle,
+                        uint32_t bits, uint64_t val);
+void            fstWriterEmitValueChangeVec32(void *ctx, fstHandle handle,
+                        uint32_t bits, const uint32_t *val);
+void            fstWriterEmitValueChangeVec64(void *ctx, fstHandle handle,
+                        uint32_t bits, const uint64_t *val);
 void            fstWriterEmitVariableLengthValueChange(void *ctx, fstHandle handle, const void *val, uint32_t len);
 void            fstWriterEmitTimeChange(void *ctx, uint64_t tim);
 void            fstWriterFlushContext(void *ctx);

include/gtkwave/lz4.c

@@ -27,6 +27,8 @@
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+   SPDX-License-Identifier: BSD-2-Clause
+
    You can contact the author at :
    - LZ4 source repository : https://github.com/Cyan4973/lz4
    - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c

include/gtkwave/lz4.h

@@ -28,6 +28,8 @@
    (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
    OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+   SPDX-License-Identifier: BSD-2-Clause
+
    You can contact the author at :
    - LZ4 source repository : https://github.com/Cyan4973/lz4
    - LZ4 public forum : https://groups.google.com/forum/#!forum/lz4c

include/gtkwave/wavealloca.h

@@ -18,6 +18,8 @@
  * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
  * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
  * DEALINGS IN THE SOFTWARE.
+ *
+ * SPDX-License-Identifier: MIT
  */
 
 #ifndef WAVE_ALLOCA_H
@@ -33,9 +35,6 @@
 #else
 #include <malloc.h>
 #endif
-#elif defined(_MSC_VER)
-#include <malloc.h>
-#define alloca _alloca
 #endif
 #define wave_alloca alloca
 #endif