doc/FPGAs.yml: added Kintex UltraScale+ reference

basic PDI prog for Spartan Ultrascale+

.github/workflows/Test.yml

@@ -14,7 +14,7 @@ jobs:
     steps:
 
     - name: '🧰 Checkout'
-      uses: actions/checkout@v2
+      uses: actions/checkout@v4
 
     - name: '📓 BuildTheDocs (BTD)'
       uses: buildthedocs/btd@v0
@@ -27,7 +27,7 @@ jobs:
       run: sudo rm -rf doc/_build/html/.git
 
     - name: '📤 Upload artifact: HTML'
-      uses: actions/upload-artifact@v2
+      uses: actions/upload-artifact@v4
       with:
         name: openFPGALoader-Documentation
         path: doc/_build/html
@@ -38,14 +38,14 @@ jobs:
       fail-fast: false
       matrix:
         os:
-        - 20
         - 22
+        - 24
     name: '🚧🐧 Ubuntu ${{ matrix.os }} | build'
     runs-on: ubuntu-${{ matrix.os }}.04
     steps:
 
     - name: '🧰 Checkout'
-      uses: actions/checkout@v2
+      uses: actions/checkout@v4
 
     - name: '⚙️ Install dependencies'
       run: |
@@ -55,7 +55,7 @@ jobs:
           gzip \
           libftdi1-2 \
           libftdi1-dev \
-          libhidapi-hidraw0 \
+          libhidapi-libusb0 \
           libhidapi-dev \
           libudev-dev \
           pkg-config \
@@ -80,7 +80,7 @@ jobs:
         tar -cvzf ../ubtuntu${{ matrix.os }}.04-openFPGALoader.tgz -C dist .
 
     - name: '📤 Upload artifact: tarball'
-      uses: actions/upload-artifact@v2
+      uses: actions/upload-artifact@v4
       with:
         name: ubtuntu${{ matrix.os }}.04-openFPGALoader
         path: ubtuntu${{ matrix.os }}.04-openFPGALoader.tgz
@@ -101,7 +101,7 @@ jobs:
     steps:
 
     - name: '🧰 Checkout'
-      uses: actions/checkout@v2
+      uses: actions/checkout@v4
 
     - name: '⚙️ Install dependencies'
       run: |
@@ -122,8 +122,8 @@ jobs:
       fail-fast: false
       matrix:
         os:
-        - 20
         - 22
+        - 24
     name: '🚦🐧 Ubuntu ${{ matrix.os }} | test'
     runs-on: ubuntu-${{ matrix.os }}.04
     steps:
@@ -133,12 +133,12 @@ jobs:
         sudo apt update -qq
         sudo apt install -y \
           libftdi1-2 \
-          libhidapi-hidraw0 \
+          libhidapi-libusb0 \
           udev \
           zlib1g
 
     - name: '📥 Download artifact: package'
-      uses: actions/download-artifact@v2
+      uses: actions/download-artifact@v4.1.7
       with:
         name: ubtuntu${{ matrix.os }}.04-openFPGALoader
 
@@ -158,7 +158,7 @@ jobs:
       jobs: ${{ steps.matrix.outputs.jobs }}
     steps:
     - id: matrix
-      uses: msys2/setup-msys2/matrix@main
+      uses: msys2/setup-msys2/matrix@a5d2c5a565c520efa5f477391e4e3f87c2e08f46
       with:
         systems: >-
           mingw64
@@ -167,7 +167,7 @@ jobs:
 
   win:
     needs: win-jobs
-    uses: msys2/setup-msys2/.github/workflows/PKGBUILD.yml@main
+    uses: msys2/setup-msys2/.github/workflows/PKGBUILD.yml@a5d2c5a565c520efa5f477391e4e3f87c2e08f46
     with:
       name: openFPGALoader
       matrix: ${{ needs.win-jobs.outputs.jobs }}
@@ -187,7 +187,7 @@ jobs:
     steps:
 
     - name: '📥 Download artifacts'
-      uses: actions/download-artifact@v2
+      uses: actions/download-artifact@v4.1.7
       with:
         path: artifact
 

99-openfpgaloader.rules

@@ -24,6 +24,7 @@ ATTRS{idVendor}=="0403", ATTRS{idProduct}=="6015", MODE="664", GROUP="plugdev",
 
 # anlogic cable
 ATTRS{idVendor}=="0547", ATTRS{idProduct}=="1002", MODE="664", GROUP="plugdev", TAG+="uaccess"
+ATTRS{idVendor}=="336c", ATTRS{idProduct}=="1002", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
 # altera usb-blaster
 ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6001", MODE="664", GROUP="plugdev", TAG+="uaccess"
@@ -35,6 +36,9 @@ ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6810", MODE="664", GROUP="plugdev",
 # altera usb-blasterII - initialized
 ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6010", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
+# altera usb-blasterIII
+ATTRS{idVendor}=="09fb", ATTRS{idProduct}=="6022", MODE="664", GROUP="plugdev", TAG+="uaccess"
+
 # dirtyJTAG
 ATTRS{idVendor}=="1209", ATTRS{idProduct}=="c0ca", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
@@ -50,10 +54,19 @@ ATTRS{idVendor}=="0d28", ATTRS{idProduct}=="0204", MODE="664", GROUP="plugdev",
 # icebreaker bitsy
 ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="6146", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
+# Radiona ULX3S/ULX4M (DFU)
+ATTRS{idVendor}=="1d50", ATTRS{idProduct}=="614b", MODE="664", GROUP="plugdev", TAG+="uaccess"
+
+# numato systems
+ATTRS{idVendor}=="2a19", ATTRS{idProduct}=="1009", MODE="644", GROUP="plugdev", TAG+="uaccess"
+
 # orbtrace-mini dfu
 ATTRS{idVendor}=="1209", ATTRS{idProduct}=="3442", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
 # QinHeng Electronics USB To UART+JTAG (ch347)
 ATTRS{idVendor}=="1a86", ATTRS{idProduct}=="55dd", MODE="664", GROUP="plugdev", TAG+="uaccess"
 
+# ESP32-S3 (usb-jtag bridge)
+ATTRS{idVendor}=="303a", ATTRS{idProduct}=="1001", MODE="664", GROUP="plugdev", TAG+="uaccess"
+
 LABEL="openfpgaloader_rules_end"

CMakeLists.txt

@@ -1,9 +1,8 @@
 cmake_minimum_required(VERSION 3.5)
 
 # set the project name
-project(openFPGALoader VERSION "0.12.0" LANGUAGES CXX)
+project(openFPGALoader VERSION "1.0.0" LANGUAGES CXX)
 add_definitions(-DVERSION=\"v${PROJECT_VERSION}\")
-
 option(ENABLE_OPTIM "Enable build with -O3 optimization level" ON)
 option(BUILD_STATIC "Whether or not to build with static libraries" OFF)
 if (${CMAKE_SYSTEM_NAME} MATCHES "Windows")
@@ -12,6 +11,7 @@ else()
 	option(ENABLE_UDEV "use udev to search JTAG adapter from /dev/xx" ON)
 endif()
 option(ENABLE_CMSISDAP "enable cmsis DAP interface (requires hidapi)" ON)
+option(ENABLE_GOWIN_GWU2X "enable Gowin GWU2X interface" ON)
 if (${CMAKE_SYSTEM_NAME} MATCHES "Linux")
 	option(ENABLE_LIBGPIOD "enable libgpiod bitbang driver (requires libgpiod)" ON)
 	option(ENABLE_REMOTEBITBANG "enable remote bitbang driver" ON)
@@ -28,7 +28,7 @@ set(ISE_PATH "/opt/Xilinx/14.7" CACHE STRING "ise root directory (default: /opt/
 set(CMAKE_CXX_STANDARD 11)
 set(CMAKE_CXX_STANDARD_REQUIRED True)
 set(CMAKE_CXX_FLAGS_DEBUG "-g -Wall -Wextra ${CMAKE_CXX_FLAGS_DEBUG}")
-if (ENABLE_OPTIM)
+if(ENABLE_OPTIM AND NOT(CMAKE_BUILD_TYPE STREQUAL "Debug"))
 	set(CMAKE_CXX_FLAGS "-O3 ${CMAKE_CXX_FLAGS}")
 endif()
 
@@ -48,10 +48,10 @@ if (USE_PKGCONFIG)
 	find_package(PkgConfig REQUIRED)
 	pkg_check_modules(LIBFTDI REQUIRED libftdi1)
 	pkg_check_modules(LIBUSB REQUIRED libusb-1.0)
-	pkg_check_modules(HIDAPI hidapi-hidraw)
-	# if hidraw not found try with libusb
+	pkg_check_modules(HIDAPI hidapi-libusb)
+	# if libusb not found try with hidraw
 	if (NOT HIDAPI_FOUND)
-		pkg_check_modules(HIDAPI hidapi-libusb)
+		pkg_check_modules(HIDAPI hidapi-hidraw)
 	endif()
 	if (NOT HIDAPI_FOUND)
 		pkg_check_modules(HIDAPI hidapi)
@@ -100,7 +100,6 @@ set(OPENFPGALOADER_SOURCE
 	src/efinix.cpp
 	src/efinixHexParser.cpp
 	src/fx2_ll.cpp
-	src/ice40.cpp
 	src/ihexParser.cpp
 	src/pofParser.cpp
 	src/rawParser.cpp
@@ -109,8 +108,6 @@ set(OPENFPGALOADER_SOURCE
 	src/usbBlaster.cpp
 	src/epcq.cpp
 	src/svf_jtag.cpp
-	src/jedParser.cpp
-	src/feaparser.cpp
 	src/display.cpp
 	src/jtag.cpp
 	src/ftdiJtagBitbang.cpp
@@ -118,12 +115,10 @@ set(OPENFPGALOADER_SOURCE
 	src/configBitstreamParser.cpp
 	src/ftdipp_mpsse.cpp
 	src/main.cpp
-	src/latticeBitParser.cpp
 	src/libusb_ll.cpp
 	src/gowin.cpp
 	src/device.cpp
 	src/jlink.cpp
-	src/lattice.cpp
 	src/progressBar.cpp
 	src/fsparser.cpp
 	src/mcsParser.cpp
@@ -134,6 +129,7 @@ set(OPENFPGALOADER_SOURCE
 	src/xilinxMapParser.cpp
 	src/colognechip.cpp
 	src/colognechipCfgParser.cpp
+	src/esp_usb_jtag.cpp
 )
 
 set(OPENFPGALOADER_HEADERS
@@ -151,7 +147,6 @@ set(OPENFPGALOADER_HEADERS
 	src/efinix.hpp
 	src/efinixHexParser.hpp
 	src/fx2_ll.hpp
-	src/ice40.hpp
 	src/ihexParser.hpp
 	src/pofParser.hpp
 	src/progressBar.hpp
@@ -167,8 +162,6 @@ set(OPENFPGALOADER_HEADERS
 	src/fsparser.hpp
 	src/part.hpp
 	src/board.hpp
-	src/jedParser.hpp
-	src/feaparser.hpp
 	src/display.hpp
 	src/mcsParser.hpp
 	src/ftdipp_mpsse.hpp
@@ -182,12 +175,30 @@ set(OPENFPGALOADER_HEADERS
 	src/gowin.hpp
 	src/cable.hpp
 	src/ftdispi.hpp
-	src/lattice.hpp
-	src/latticeBitParser.hpp
 	src/xilinx.hpp
 	src/xilinxMapParser.hpp
 	src/colognechip.hpp
 	src/colognechipCfgParser.hpp
+	src/esp_usb_jtag.hpp
+)
+
+# Lattice Drivers / Files parsers.
+list(APPEND OPENFPGALOADER_SOURCE
+	src/ice40.cpp
+	src/lattice.cpp
+	src/latticeSSPI.cpp
+	src/feaparser.cpp
+	src/jedParser.cpp
+	src/latticeBitParser.cpp
+)
+
+list(APPEND OPENFPGALOADER_HEADERS
+	src/ice40.hpp
+	src/lattice.hpp
+	src/latticeSSPI.hpp
+	src/jedParser.hpp
+	src/feaparser.hpp
+	src/latticeBitParser.hpp
 )
 
 link_directories(
@@ -218,6 +229,16 @@ target_link_libraries(openFPGALoader
 	${LIBFTDI_LIBRARIES}
 )
 
+# Gowin GWU2X JTAG interface
+if(ENABLE_GOWIN_GWU2X)
+	target_sources(openFPGALoader PRIVATE src/gwu2x_jtag.cpp)
+	list (APPEND OPENFPGALOADER_HEADERS src/gwu2x_jtag.hpp)
+	add_definitions(-DENABLE_GOWIN_GWU2X=1)
+	message("Gowin GWU2X support enabled")
+else()
+	message("Gowin GWU2X support disabled")
+endif()
+
 if (${CMAKE_SYSTEM_NAME} MATCHES "Windows")
 	# winsock provides ntohs
 	target_link_libraries(openFPGALoader ws2_32)

README.md

@@ -49,7 +49,7 @@ openFPGALoader -c cmsisdap fpga_bitstream.bit
 ## Usage
 
 ```
-Usage: openFPGALoader [OPTION...] BIT_FILE
+Usage: ./openFPGALoader [OPTION...] BIT_FILE
 openFPGALoader -- a program to flash FPGA
 
       --altsetting arg          DFU interface altsetting (only for DFU mode)
@@ -61,6 +61,8 @@ openFPGALoader -- a program to flash FPGA
   -B, --bridge arg              disable spiOverJtag model detection by
                                 providing bitstream(intel/xilinx)
   -c, --cable arg               jtag interface
+      --status-pin arg          JTAG mode / FTDI: GPIO pin number to use as a
+                                status indicator (active low)
       --invert-read-edge        JTAG mode / FTDI: read on negative edge
                                 instead of positive
       --vid arg                 probe Vendor ID
@@ -71,10 +73,13 @@ openFPGALoader -- a program to flash FPGA
       --ftdi-serial arg         FTDI chip serial number
       --ftdi-channel arg        FTDI chip channel number (channels 0-3 map to
                                 A-D)
-      --detect                  detect FPGA
+  -d, --device arg              device to use (/dev/ttyUSBx)
+      --detect                  detect FPGA, add -f to show connected flash
       --dfu                     DFU mode
       --dump-flash              Dump flash mode
       --bulk-erase              Bulk erase flash
+      --enable-quad             Enable quad mode for SPI Flash
+      --disable-quad            Disable quad mode for SPI Flash
       --target-flash arg        for boards with multiple flash chips (some
                                 Xilinx UltraScale boards), select the target
                                 flash: primary (default), secondary or both
@@ -84,11 +89,13 @@ openFPGALoader -- a program to flash FPGA
                                 with dump-flash
       --file-type arg           provides file type instead of let's deduced
                                 by using extension
-      --flash-sector arg        flash sector (Lattice parts only)
+      --flash-sector arg        flash sector (Lattice and Altera MAX10 parts
+                                only)
       --fpga-part arg           fpga model flavor + package
       --freq arg                jtag frequency (Hz)
   -f, --write-flash             write bitstream in flash (default: false)
       --index-chain arg         device index in JTAG-chain
+      --misc-device arg         add JTAG non-FPGA devices <idcode,irlen,name>
       --ip arg                  IP address (XVC and remote bitbang client)
       --list-boards             list all supported boards
       --list-cables             list all supported cables
@@ -96,7 +103,8 @@ openFPGALoader -- a program to flash FPGA
   -m, --write-sram              write bitstream in SRAM (default: true)
   -o, --offset arg              Start address (in bytes) for read/write into
                                 non volatile memory (default: 0)
-      --pins arg                pin config TDI:TDO:TCK:TMS
+      --pins arg                pin config TDI:TDO:TCK:TMS or
+                                MOSI:MISO:SCK:CS[:HOLDN:WPN]
       --probe-firmware arg      firmware for JTAG probe (usbBlasterII)
       --protect-flash arg       protect SPI flash area
       --quiet                   Produce quiet output (no progress bar)
@@ -113,10 +121,15 @@ openFPGALoader -- a program to flash FPGA
                                 1:verbose, 2:debug
   -h, --help                    Give this help list
       --verify                  Verify write operation (SPI Flash only)
+      --xvc                     Xilinx Virtual Cable Functions
       --port arg                Xilinx Virtual Cable and remote bitbang Port
                                 (default 3721)
       --mcufw arg               Microcontroller firmware
       --conmcu                  Connect JTAG to MCU
+  -D, --read-dna                Read DNA (Xilinx FPGA only)
+  -X, --read-xadc               Read XADC (Xilinx FPGA only)
+      --read-register arg       Read Status Register(Xilinx FPGA only)
+      --user-flash arg          User flash file (Gowin LittleBee FPGA only)
   -V, --Version                 Print program version
 
 Mandatory or optional arguments to long options are also mandatory or optional
@@ -142,3 +155,7 @@ OPENFPGALOADER_SOJ_DIR=/somewhere openFPGALoader xxxx
 
 `OPENFPGALOADER_SOJ_DIR` must point to directory containing **spiOverJtag**
 bitstreams.
+
+## Sponsors/Partners
+
+![Sponsors](https://github.com/user-attachments/assets/cb4efce1-ed0c-461c-bd05-9caeb440870d)

doc/FPGAs.yml

@@ -1,14 +1,16 @@
 Anlogic:
 
   - Description: EG4
-    Model: S20
-    URL: http://www.anlogic.com/prod_view.aspx?TypeId=10&Id=168&FId=t3:10:3
+    Model:
+      - EG4D20
+      - EG4S20
+    URL: https://www.anlogic.com/en/product/fpga/saleagle/eg4
     Memory: OK
     Flash: AS
 
   - Description: SALELF 2
     Model: EF2M45
-    URL: http://www.anlogic.com/prod_view.aspx?TypeId=12&Id=170&FId=t3:12:3
+    URL: https://www.anlogic.com/en/product/fpga/salelf/salelf2
     Memory: OK
     Flash: OK
 
@@ -31,13 +33,17 @@ Cologne Chip:
 Efinix:
 
   - Description: Trion
-    Model: T8
+    Model:
+      - T8
+      - T13
     URL: https://www.efinixinc.com/products-trion.html
     Memory: NA
     Flash: OK
 
   - Description: Titanium
-    Model: Ti60
+    Model:
+      - Ti60
+      - Ti180
     URL: https://www.efinixinc.com/products-titanium.html
     Memory: NA
     Flash: OK
@@ -45,7 +51,7 @@ Efinix:
 
 Gowin:
 
-  - Description: GW1N
+  - Description: LittleBee (GW1N)
     Model:
      - GW1N-1
      - GW1N-4
@@ -54,17 +60,43 @@ Gowin:
      - GW1NS-2C
      - GW1NSR-4C
      - GW1NZ-1
-     - GW2A-18C
-     - GW5AST-138
-     - GW5AT-138
-     - GW5A-25
-    URL: https://www.gowinsemi.com/en/product/detail/2/
+    URL: https://www.gowinsemi.com/en/product/detail/46/
     Memory: OK
-    Flash: IF / EF
+    Flash: IF
+
+  - Description: Arora (GW2A)
+    Model:
+     - GW2A-18C
+     - GW2A-55
+    URL: https://www.gowinsemi.com/en/product/detail/38/
+    Memory: OK
+    Flash: EF
+
+  - Description: Arora V (GW5A)
+    Model:
+     - GW5A-25
+     - GW5AST-138
+     - GW5AT-60
+     - GW5AT-138
+    URL: https://www.gowinsemi.com/en/product/detail/60/
+    Memory: OK
+    Flash: EF
 
 
 Intel:
 
+  - Description: Max II(CPLD)
+    Model: EPM240T100C5N
+    URL: https://www.intel.com/content/www/us/en/support/programmable/support-resources/devices/max-ii-support.html
+    Memory: OK
+    Flash: OK
+
+  - Description: Cyclone II
+    Model: EP2C5T144C8N
+    URL: https://www.intel.com/content/www/us/en/support/programmable/support-resources/devices/cyclone-ii-support.html
+    Memory: OK
+    Flash: OK
+    
   - Description: Cyclone III
     Model: EP3C16
     URL: https://www.intel.com/content/www/us/en/programmable/products/fpga/cyclone-series/cyclone-iii/support.html
@@ -79,6 +111,13 @@ Intel:
     Memory: OK
     Flash: OK
 
+  - Description: Cyclone IV GX
+    Model:
+      - EP4CGX150
+    URL: https://www.intel.com/content/www/us/en/products/details/fpga/cyclone/iv/gx/products.html
+    Memory: OK
+    Flash: OK
+
   - Description: Cyclone V E
     Model:
       - 5CEA2
@@ -98,6 +137,13 @@ Intel:
     Memory: OK
     Flash: NT
   
+  - Description: Stratix V GS
+    Model:
+      - 5SGSD5
+    URL: https://www.intel.de/content/www/de/de/products/sku/210318/stratix-v-5sgsd5-fpga/specifications.html
+    Memory: OK
+    Flash: OK
+
   - Description: Cyclone 10 LP
     Model: 10CL025
     URL: https://www.intel.com/content/www/us/en/products/programmable/fpga/cyclone-10.html
@@ -105,10 +151,12 @@ Intel:
     Flash: OK
 
   - Description: Max 10
-    Model: 10M08
+    Model: 
+      - 10M02
+      - 10M08
     URL: https://www.intel.fr/content/www/fr/fr/products/details/fpga/max/10.html
     Memory: SVF
-    Flash: SVF
+    Flash: POF
 
 
 Lattice:
@@ -131,6 +179,12 @@ Lattice:
     Memory: OK
     Flash: OK
 
+  - Description: ECP3
+    Model: LFE3-70E
+    URL: https://www.latticesemi.com/Products/FPGAandCPLD/LatticeECP3
+    Memory: OK
+    Flash: TBD
+
   - Description: ECP5
     Model:
       - LFE5U-12
@@ -214,6 +268,7 @@ Xilinx:
       - xc7k325t
       - xc7k410t
       - xc7k420t
+      - xc7k480t
     URL: https://www.xilinx.com/products/silicon-devices/fpga/kintex-7.html#productTable
     Memory: OK
     Flash: OK
@@ -237,6 +292,7 @@ Xilinx:
 
   - Description: Artix UltraScale+
     Model:
+      - xcau15p
       - xcau25p
     URL: https://www.xilinx.com/products/silicon-devices/fpga/artix-ultrascale-plus.html
     Memory: OK
@@ -250,7 +306,15 @@ Xilinx:
       - xcku115
     URL: https://www.xilinx.com/products/silicon-devices/fpga/kintex-ultrascale.html#productTable
     Memory: OK
-    Flash: NA
+    Flash: OK (primary)
+
+  - Description: Kintex UltraScale+
+    Model:
+      - xcku3p
+      - xcku5p
+    URL: https://www.xilinx.com/products/silicon-devices/fpga/kintex-ultrascale-plus.html#productTable
+    Memory: OK
+    Flash: OK
 
   - Description: Virtex 6
     Model:
@@ -259,6 +323,13 @@ Xilinx:
     Memory: OK
     Flash: OK
 
+  - Description: Virtex UltraScale
+    Model:
+      - xcvu095
+    URL: https://www.amd.com/en/products/adaptive-socs-and-fpgas/fpga/virtex-ultrascale.html#productTable
+    Memory: OK
+    Flash: TBD
+
   - Description: Virtex UltraScale+
     Model:
       - xcvu9p
@@ -266,6 +337,13 @@ Xilinx:
     Memory: OK
     Flash: OK
 
+  - Description: Spartan UltraScale+
+    Model:
+      - xcsu35p
+    URL: https://www.amd.com/en/products/adaptive-socs-and-fpgas/fpga/spartan-ultrascale-plus.html#productTable
+    Memory: OK
+    Flash: TBD
+
   - Description: Spartan 3
     Model:
       - xc3s200
@@ -280,6 +358,7 @@ Xilinx:
       - xc6slx16
       - xc6slx25
       - xc6slx45
+      - xc6slx45T
       - xc6slx150T
     URL: https://www.xilinx.com/products/silicon-devices/fpga/spartan-6.html
     Memory: OK

doc/boards.yml

@@ -1,7 +1,7 @@
 - ID: ac701
   Description: Xilinx Artix-7 FPGA AC701 Evaluation Kit
   URL: https://www.xilinx.com/products/boards-and-kits/ek-a7-ac701-g.html
-  FPGA: Artix xc7a200t2fbg676c
+  FPGA: Artix xc7a200tfbg676
   Memory: OK
   Flash: NT
   Constraints: AC701
@@ -13,6 +13,20 @@
   Memory: OK
   Flash: OK
 
+- ID: alinx_ax7201
+  Description: AX7201 FPGA Dev Board & Kit with AMD Artix 7
+  URL: https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7201.html
+  FPGA: Artix xc7a200tsbg484
+  Memory: OK
+  Flash: OK
+
+- ID: alinx_ax7203
+  Description: AX7203 FPGA Dev Board & Kit with AMD Artix 7
+  URL: https://www.en.alinx.com/Product/FPGA-Development-Boards/Artix-7/AX7203.html
+  FPGA: Artix xc7a200tfbg484
+  Memory: OK
+  Flash: OK
+
 - ID: litex-acorn-baseboard-mini
   Description: The LiteX-Acorn-Baseboards are baseboards developed around the SQRL's Acorn board (or Nite/LiteFury)
   URL: https://github.com/enjoy-digital/litex-acorn-baseboard/
@@ -265,6 +279,13 @@
   Memory: OK
   Flash: OK
 
+- ID: cyc5000
+  Description: Trenz CYC5000
+  URL: https://shop.trenz-electronic.de/en/TEI0050-01-AAH13A-CYC5000-with-Cyclone-V-FPGA-25kLE-8-MByte-SDRAM
+  FPGA: Cyclone V 5CEBA2U15C8
+  Memory: OK
+  Flash: OK
+
 - ID: c10lp-refkit
   Description: Trenz c10lp-refkit
   URL: https://shop.trenz-electronic.de/en/TEI0009-02-055-8CA-Cyclone-10-LP-RefKit-10CL055-Development-Board-32-MByte-SDRAM-16-MByte-Flash
@@ -323,6 +344,13 @@
   FPGA: MAX 10 10M50DAF484C6GES
   Memory: OK
 
+- ID: dragonL
+  Description: KNJN Dragon-L PCI Express & HDMI FPGA board
+  URL: https://www.knjn.com/FPGA-Dragon-L.html
+  FPGA: Spartan6 xc6slx25Tcsg324
+  Memory: OK
+  Flash: OK
+
 - ID: ecp5_evn
   Description: Lattice ECP5 5G Evaluation Board
   URL: https://www.latticesemi.com/en/Products/DevelopmentBoardsAndKits/ECP5EvaluationBoard
@@ -373,6 +401,13 @@
   Memory: OK
   Flash: NA
 
+- ID: hyvision_opt01
+  Description: HyVision PCIe OPT01 rev.F
+  URL: NA
+  FPGA: Kintex7 xc7k70tfbg676
+  Memory: OK
+  Flash: OK
+
 - ID: honeycomb
   Description: honeycomb
   URL: https://github.com/Disasm/honeycomb-pcb
@@ -453,6 +488,13 @@
   Flash: AS
   Constraints: IceZumAlhambraII
 
+- ID: icepi-zero
+  Description: Icepi Zero
+  URL: https://github.com/cheyao/icepi-zero
+  FPGA: ECP5 LFE5U
+  Memory: OK
+  Flash: OK
+
 - ID: kc705
   Description: Xilinx KC705
   URL: https://www.xilinx.com/products/boards-and-kits/ek-k7-kc705-g.html
@@ -466,7 +508,7 @@
   URL: https://www.xilinx.com/products/boards-and-kits/kcu105.html
   FPGA: Kintex UltraScale xcku040-ffva1156
   Memory: OK
-  Flash: OK
+  Flash: OK (primary and secondary)
 
 - ID: kcu116
   Description: Xilinx KCU116
@@ -496,6 +538,13 @@
   Memory: OK
   Flash: OK
 
+- ID: lilygo-t-fpga
+  Description: Lilygo T-FPGA
+  URL: https://www.lilygo.cc/products/t-fpga
+  FPGA: Gowin GW1NSR-LV4CQN48PC6/15
+  Memory: OK
+  Flash: OK
+
 - ID: machXO2EVN
   Description: Lattice MachXO2 Breakout Board Evaluation Kit
   URL: https://www.latticesemi.com/products/developmentboardsandkits/machxo2breakoutboard
@@ -517,6 +566,13 @@
   Memory: OK
   Flash: OK
 
+- ID: mlk-s200-eg4d20
+  Description: MILIANKE S200 EG4D20 Development Board
+  URL: https://www.milianke.com/product-item-108.html
+  FPGA: eagle s20 EG4D20EG176
+  Memory: OK
+  Flash: OK
+
 - ID: mini_itx
   Description: Avnet Mini-ITX Base Kit
   URL: https://www.avnet.com/wps/portal/us/products/avnet-boards/avnet-board-families/mini-itx/
@@ -524,6 +580,13 @@
   Memory: OK
   Flash: NA
 
+- ID: mimas_a7
+  Description: Numato Systems Mimas A7
+  URL: https://numato.com/product/mimas-a7-artix-7-fpga-development-board/
+  FPGA: Artix xc7a50tfgg484
+  Memory: OK
+  Flash: OK
+
 - ID: nexys_a7_50
   Description: Digilent Nexys A7(Nexys 4 DDR)
   URL: https://digilent.com/reference/programmable-logic/nexys-a7/start
@@ -561,6 +624,13 @@
   Memory: OK
   Flash: NT
 
+- ID: opensourceSDRLabKintex7
+  Description: Open Source SDR Lab Kintex-7 325t FPGA PCIE Development Board
+  URL: https://opensourcesdrlab.com/products/fpga-xilinx-kintex-7-xc7k325t-pcie-development-board-with-dual-gigabit-ethernet-ports-dual-10-gigabit-sfp-optical-communication
+  FPGA: Kintex7 xc7k325tffg676
+  Memory: OK
+  Flash: OK
+
 - ID: orbtrace_dfu
   Description: ORBTrace mini (dfu mode)
   URL: https://store.zyp.no/product/orbtrace-mini
@@ -674,6 +744,13 @@
   Memory: OK
   Flash: NA
 
+- ID: SPEC45
+  Description: CERN Simple PCIe FMC carrier SPEC
+  URL: https://ohwr.org/project/spec150/wikis/home
+  FPGA: Spartan6 xc6slx45Tfgg484
+  Memory: OK
+  Flash: OK
+
 - ID: SPEC150
   Description: CERN Simple PCIe FMC carrier SPEC
   URL: https://ohwr.org/project/spec150/wikis/home
@@ -688,6 +765,13 @@
   Memory: OK
   Flash: OK
 
+- ID: tangconsole
+  Description: Sipeed Tang Console (dock board for Tang Mega 60k or 138k SOM)
+  URL: https://wiki.sipeed.com/hardware/en/tang/tang-console/mega-console.html
+  FPGA: Gowin Arora V GW5AT-60 / GW5AT-138
+  Memory: OK
+  Flash: OK
+
 - ID: tangnano
   Description: Sipeed Tang Nano
   URL: https://tangnano.sipeed.com/en/
@@ -818,6 +902,13 @@
   Memory: NA
   Flash: OK
 
+- ID: ulx4m_dfu
+  Description: Radiona ULX4M LD/LS DFU mode
+  URL: https://github.com/intergalaktik/ulx4m-ls
+  FPGA: ECP5 LFE5U
+  Memory: NA
+  Flash: OK
+
 - ID: vec_v6
   Description: Xilinx VCU118
   URL: https://vmm-srs.docs.cern.ch/
@@ -825,6 +916,20 @@
   Memory: OK
   Flash: OK
 
+- ID: vc709
+  Description: AMD Virtex-7 FPGA VC709 Connectivity Kit
+  URL: https://www.xilinx.com/products/boards-and-kits/dk-v7-vc709-g.html
+  FPGA: Virtex7 xc7vx690tffg1761
+  Memory: OK
+  Flash: NA
+
+- ID: vcu108
+  Description: Xilinx VCU108
+  URL: https://www.xilinx.com/products/boards-and-kits/vcu108.html
+  FPGA: Virtex UltraScale xcvu095-ffva2104
+  Memory: OK
+  Flash: TBD
+
 - ID: vcu118
   Description: Xilinx VCU118
   URL: https://www.xilinx.com/products/boards-and-kits/vcu118.html
@@ -939,3 +1044,24 @@
   FPGA: xc7s50csga324?
   Memory: OK
   Flash: OK
+
+- ID: efinix_jtag_ft2232
+  Description: Efinix FT2232 development boards with JTAG on port 2 (Ti180J484 EVK, etc)
+  URL: https://www.efinixinc.com/products-devkits-titaniumti180j484.html
+  FPGA: Titanium Ti180J484 (and others)
+  Memory: OK
+  Flash: NA
+
+- ID: step-max10_v1
+  Description: STEP MAX10 V1
+  URL: https://wiki.stepfpga.com/step-max10
+  FPGA: Altera 10M02SCM153C8G
+  Memory: OK
+  Flash: NA
+
+- ID: step-mxo2_v2
+  Description: STEP MXO2 V2
+  URL: https://wiki.stepfpga.com/xo2-4000hc
+  FPGA: Lattice LCMXO2-4000HC-4MG132CC
+  Memory: OK
+  Flash: OK

doc/cable.yml

@@ -12,6 +12,13 @@ arm-usb-ocd-h:
     URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-OCD-H/
 
 
+arm-usb-tiny-h:
+
+  - Name: Olimex ARM-USB-TINY-H adapter
+    Description: Low-cost high-speed ARM USB JTAG
+    URL: https://www.olimex.com/Products/ARM/JTAG/ARM-USB-TINY-H/
+
+
 bus_blaster:
 
   - Name: Dangerousprototypes Bus Blaster
@@ -67,6 +74,13 @@ gatemate_evb_spi:
     URL: https://colognechip.com/programmable-logic/gatemate/
 
 
+gwu2x:
+
+  - Name: gwu2x
+    Description: Gowin GWUX2X
+    URL: https://www.gowinsemi.com/en/product/detail/55/
+
+
 dfu:
 
   - Name: DFU interface
@@ -228,6 +242,11 @@ lpc-link2:
     URL: https://www.nxp.com/design/microcontrollers-developer-resources/lpc-link2:OM13054
 
 
+numato:
+
+  - Name: numato
+    Description: Embedded cable for Numato Systems Mimas-A7 board
+    
 orbtrace:
 
   - Name: orbtrace interface
@@ -276,6 +295,13 @@ usb-blasterII:
     URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
 
 
+usb-blasterIII:
+
+  - Name: intel USB Blaster III interface
+    Description: JTAG programmer cable from intel/altera (FTDI2232 with custom VID/PID)
+    URL: https://www.intel.com/content/dam/www/programmable/us/en/pdfs/literature/ug/ug_usb_blstr_ii_cable.pdf
+
+
 xvc-client:
 
   - Name: Xilinx Virtual Cable

doc/guide/advanced.rst

@@ -34,7 +34,7 @@ Reading the bitstream from STDIN
   .. code-block:: bash
 
     # FPGA side
-    nc -lp port | openFPGALoader --file-type xxx [option
+    nc -lp port | openFPGALoader --file-type xxx [option]
 
     # Bitstream side
     nc -q 0 host port < /path/to/bitstream.ext
@@ -83,6 +83,35 @@ Writing to an arbitrary address in flash memory
 With FPGA using an external SPI flash (*xilinx*, *lattice ECP5/nexus/ice40*, *anlogic*, *efinix*) option ``-o`` allows
 one to write raw binary file to an arbitrary adress in FLASH.
 
+Detect/read/write on primary/secondary flash memories
+=====================================================
+
+With FPGA using two external SPI flash (some *xilinx* boards) option ``--target-flash`` allows to select the QSPI chip.
+
+To detect:
+
+.. code-block:: bash
+
+    openFPGALoader -b kcu105 -f --target-flash {primary,secondary} --detect
+
+To read the primary flash memory:
+
+.. code-block:: bash
+
+    openFPGALoader -b kcu105 -f --target-flash primary --dump-flash --file-size N_BYTES mydump.bin
+
+and the second flash memory:
+
+.. code-block:: bash
+
+    openFPGALoader -b kcu105 -f --target-flash secondary --dump-flash --file-size N_BYTES --secondary-bitstream mydump.bin
+
+To write on secondary flash memory:
+
+.. code-block:: bash
+
+    openFPGALoader -b kcu105 -f --target-flash secondary --secondary-bitstream mySecondaryBitstream.bin
+
 Using an alternative directory for *spiOverJtag*
 ================================================
 

doc/guide/install.rst

@@ -6,6 +6,32 @@ Installing openFPGALoader
 Linux
 =====
 
+Debian/Ubuntu
+----------
+
+openFPGALoader is available in the default repositories:
+
+.. code-block:: bash
+    
+    sudo apt install openfpgaloader
+
+Guix
+----------
+
+openFPGALoader is available in the default repositories:
+
+.. code-block:: bash
+
+    guix install openfpgaloader
+
+To use openFPGALoader under GuixSystem without root privileges it is necessary to install the necessary udev rules. This can be done by extending ``udev-service-type`` in the ``operating-system`` configuration file with this package
+
+.. code-block:: bash
+
+    (udev-rules-service 'openfpgaloader openfpgaloader #:groups '(\"plugdev\")
+
+Additionally, ``plugdev`` group should be registered in the ``supplementary-groups`` field of your ``user-account``declaration.  Refer to ``Base Services`` section in the manual for examples.
+
 Arch Linux
 ----------
 
@@ -33,7 +59,7 @@ openFPGALoader is available as a Copr repository:
     sudo dnf copr enable mobicarte/openFPGALoader
     sudo dnf install openFPGALoader
 
-From source (Debian, Ubuntu)
+From source 
 ----------------------------
 
 This application uses ``libftdi1``, so this library must be installed (and, depending on the distribution, headers too):

doc/guide/troubleshooting.rst

@@ -32,6 +32,13 @@ Check your openFPGALoader version:
 
 If it is older than release then v0.9.0, install the most recent version (from commit `f5b89bff68a5e2147404a895c075773884077438 <https://github.com/trabucayre/openFPGALoader/commit/fe259fb78d185b3113661d04cd7efa9ae0232425>`_ or later).
 
+Cannot flash Tang Nano 20k (issue `#251 <https://github.com/trabucayre/openFPGALoader/issues/511>`_)
+====================================================================================================
+
+Some firmware version cannot be flashed on Linux-based systems. Version 2024122312 is such an example. It seems this version was not published on the `SiPeed website <https://api.dl.sipeed.com/TANG/Debugger/onboard/BL616/>`_, however some boards sold have this firmware.
+
+The cause of the problem is the debugger on the Tang Nano, specifically the firmware of this debugger. This firmware can be easily updated by following `these <https://wiki.sipeed.com/hardware/en/tang/common-doc/update_debugger.html>`_ steps.
+
 Cannot flash Tang Nano 9k (issue `#251 <https://github.com/trabucayre/openFPGALoader/issues/251>`_)
 ===================================================================================================
 

doc/vendors/gowin.rst

@@ -62,3 +62,17 @@ It's possible to flash external SPI Flash (connected to MSPI) in bscan mode by u
 
   Gowin's FPGA may fails to be detected if **JTAGSEL_N** (pin 08 for *GW1N-4K*) is used as a GPIO.
   To recover you have to pull down this pin (before power up) to recover JTAG interface (*UG292 - JTAGSELL_N section*).
+
+User Flash
+----------
+
+.. ATTENTION::
+  User Flash support is based on reverse engineering of the JTAG protocol. This functionality should be considered
+  experimental as it hasn't been thoroughly tested, and may in some circumstances destroy your device.
+
+Gowin FPGA come with extra flash space that can be read and written from the programmable logic ("User Flash"). This
+flash section can also be programmed via the JTAG interface:
+
+.. code-block:: bash
+
+    openFPGALoader --write-flash /path/to/bitstream.fs --user-flash /path/to/flash.bin

doc/vendors/intel.rst

@@ -34,6 +34,14 @@ SVF and RBF files are supported.
   As mentioned in ``cyclone`` handbooks, real-time decompression is not supported by FPGA in JTAG mode.
   Keep in mind to disable this option.
 
+You can have Quartus automatically generate SVF and RBF files by adding these lines to the ``qsf`` file, or include them in a ``tcl`` file in FuseSoC
+
+.. code-block:: 
+
+    set_global_assignment -name ON_CHIP_BITSTREAM_DECOMPRESSION OFF
+    set_global_assignment -name GENERATE_RBF_FILE ON
+    set_global_assignment -name GENERATE_SVF_FILE ON
+
 file load:
 
 .. code-block:: bash
@@ -47,7 +55,13 @@ with ``boardname`` = ``de0``, ``cyc1000``, ``c10lp-refkit``, ``de0nano``, ``de0n
 SPI flash
 ---------
 
-RPD and RBF are supported.
+RPD and RBF are supported. POF is only supported for MAX10 (internal flash).
+
+``pof`` to ``rpd``:
+
+.. code-block:: bash
+
+    quartus_cpf -c project_name.pof project_name.rpd
 
 ``sof`` to ``rpd``:
 
@@ -67,3 +81,142 @@ file load:
     openFPGALoader -b boardname -r project_name.rbf
 
 with ``boardname`` = ``cyc1000``, ``c10lp-refkit``.
+
+MAX10: FPGA Programming Guide
+=============================
+
+Supported Boards:
+
+* step-max10_v1
+* analogMax
+
+Supported File Types:
+
+* ``svf``
+* ``pof``
+* ``bin`` (arbitrary binary files)
+
+Internal Flash Organization
+---------------------------
+
+The internal flash is divided into five sections:
+
+- ``UFM1`` and ``UFM0`` for user data
+- ``CFM2``, ``CFM1``, and ``CFM0`` for storing one or two bitstreams
+
+.. image:: ../figs/max10_flash-memory.png
+  :alt: max10 internal flash memory structure
+
+Flash usage depends on the configuration mode. In all modes:
+
+- ``CFM0`` is used to store a bitstream
+- ``UFM0`` and ``UFM1`` are available for user data
+- The remaining ``CFMx`` sections (``CFM1``, ``CFM2``) can be used for
+  additional bitstreams or user data
+
+Using ``svf``
+-------------
+
+This method is the **simplest** (and slowest) way to load or write a bitstream.
+
+.. note::
+
+    This method is required to load a bitstream into *SRAM*.
+
+.. code-block:: bash
+
+    openFPGALoader [-b boardname] -c cablename the_svf_file.svf
+
+**Parameters:**
+
+* ``boardname``: One of the boards supported by ``openFPGALoader`` (optional).
+* ``cablename``: One of the supported cables (see ``--list-cables``).
+
+Using ``pof``
+-------------
+
+To write a bitstream into the internal flash, using a ``pof`` file is the
+**fastest** approach.
+
+.. code-block:: bash
+
+    openFPGALoader [-b boardname] [--flash-sector] -c cablename the_pof_file.pof
+
+**Parameters:**
+
+* ``boardname``: A board supported by ``openFPGALoader`` (optional).
+* ``cablename``: One of the supported cables (see ``--list-cables``).
+* ``--flash-sector``: Optional. Comma-separated list of sectors to update.
+  If omitted, the entire flash is erased and reprogrammed.
+
+Accepted Flash Sectors:
+
+* ``UFM0``, ``UFM1``: User Flash Memory sections.
+* ``CFM0``, ``CFM1``, ``CFM2``: Configuration Flash Memory sectors.
+
+**Example:**
+
+.. code-block:: bash
+
+    openFPGALoader -c usb-blaster --flash-sector UFM1,CFM0,CFM2 the_pof_file.pof
+
+This command updates ``UFM1``, ``CFM0``, and ``CFM2``, leaving all other
+sectors unchanged.
+
+Using an arbitrary binary file
+------------------------------
+
+Unlike Altera Quartus, it supports any binary format without limitations
+(not limited to a ``.bin``).
+With this feature, it's not required to provides the file at gateware build
+time: it may be updated at any time without gateware modification/rebuild.
+
+.. note:: This approach is useful to updates, for example, a softcore CPU firmware.
+
+**Basic usage:**
+
+.. code-block:: bash
+
+    openFPGALoader [-b boardname] -c cablename [--offset $OFFSET] the_bin_file.bin
+
+* ``boardname``: a boards supported by ``openFPGALoader`` (optional).
+* ``cablename``: One of the supported cables (see ``--list-cables``).
+* ``$OFFSET``: To start writing ``$OFFSET`` bytes after *User Flash memory*
+  start address (optional, default: 0x00).
+
+This command erases and writes the contents of ``the_bin_file.bin`` into
+``UFM1`` and ``UFM0``. If ``--offset`` is specified, the binary content is
+written starting from that offset.
+
+Depending on the max10 configuration mode (see picture), it's possible to
+extend *User Flash Memory* area by using `CFM2` and `CFM1`. This is not the
+default behavior and user must explictly change this by using
+`--flash-sector` argument:
+
+* ``--flash-sector UFMx`` or ``--flash-sector CFMy`` (with x= 1 or 0 and
+  y = 2 or 1) to specify only one sector
+* ``--flash-sector UFM1,UFM0`` is equivalent to the default behavior
+* ``--flash-sector UFM1,CFM2`` to erase and update ``UFM1``, ``UFM0``
+  and ``CFM2`` (equivalent to ``--flash-sector UFM1,UFM0,CFM2``)
+
+Intel/Altera (Old Boards)
+=========================
+
+.. NOTE::
+
+  * Cyclone II (FPGA) (Tested OK: EP2C5T144C8N)
+  * Max II (CPLD) (Tested OK: EPM240T100C5N)
+
+Loading a Serial Vector Format (.svf)
+-------------------------------------
+
+SVF files are supported.
+
+To load the file:
+
+ .. code-block:: bash
+
+    openFPGALoader -c usb-blaster project_name.svf
+
+ 
+ 

doc/vendors/lattice.rst

@@ -73,8 +73,8 @@ Bin file load:
 
 Since it's a direct access to the flash (SPI) the ``-b`` option is required.
 
-ECP5/Crosslink-NX
-=================
+ECP5/ECP3/Certus-NX/CertusPro-NX/Crosslink-NX
+=============================================
 
 SRAM
 ----
@@ -89,6 +89,10 @@ SRAM
 SPI Flash
 ---------
 
+.. note::
+
+   SPI Flash write is not supported for ECP3 family.
+
 BIT:
 
 .. code-block:: bash

spiOverJtag/.gitignore

@@ -1,3 +1,6 @@
 tmp_*
 *.bit
 *.rbf
+vivado*.jou
+vivado*.log
+.Xil

spiOverJtag/Makefile

@@ -1,36 +1,41 @@
 XILINX_PARTS := xc3s500evq100 \
 	xc6slx9tqg144 xc6slx9csg324 \
-	xc6slx16ftg256 xc6slx16csg324 xc6slx45csg324 xc6slx100fgg484 \
-	xc6slx150tfgg484 xc6slx150tcsg484 \
+	xc6slx16ftg256 xc6slx16csg324 xc6slx25csg324 xc6slx45csg324 xc6slx100fgg484 \
+	xc6slx25tcsg324 xc6slx45tfgg484 xc6slx150tfgg484 xc6slx150tcsg484 \
 	xc6vlx130tff784 \
-	xc7a15tcpg236 \
-	xc7a25tcpg238 xc7a25tcsg325 \
-	xc7a35tcpg236 xc7a35tcsg324 xc7a35tftg256 xc7a35tfgg484 \
-	xc7a50tcsg324 xc7a50tfgg484 xc7a50tcpg236 xc7a75tfgg484 \
-	xc7a100tcsg324 xc7a100tfgg484 xc7a100tfgg676\
-	xc7a200tsbg484 xc7a200tfbg484 \
-	xc7s25csga225 xc7s25csga324 xc7s50csga324 \
+	xc7a12t xc7a15t xc7a25t xc7a35t xc7a50t xc7a75t xc7a100t xc7a200t \
+	xc7s6 xc7s15 xc7s25 xc7s50 xc7s75 xc7s100 \
 	xc7k70tfbg484 xc7k70tfbg676 \
 	xc7k160tffg676 \
 	xc7k325tffg676 xc7k325tffg900 \
 	xc7k420tffg901 \
 	xcku3p-ffva676 \
 	xc7vx330tffg1157 \
+	xcku040-ffva1156 xcku060-ffva1156 \
 	xcku5p-ffvb676 \
-	xcvu9p-flga2104 xcvu37p-fsvh2892
+	xcvu9p-flga2104 xcvu37p-fsvh2892 \
+	xcau15p-ffvb676
 XILINX_BIT_FILES := $(addsuffix .bit.gz,$(addprefix spiOverJtag_, $(XILINX_PARTS)))
 
 ALTERA_PARTS := 10cl025256 10cl016484 10cl055484 \
-	ep4ce2217 ep4ce1523 ep4ce11523 5ce223 5ce423 5ce523 5ce927
+	ep4ce622 ep4ce1017 ep4ce2217 ep4ce1523 ep4ce11523 ep4cgx15027 5ce215 5ce223 5ce423 5ce523 5ce927 5sgsd5
 ALTERA_BIT_FILES := $(addsuffix .rbf.gz, $(addprefix spiOverJtag_, $(ALTERA_PARTS)))
 
-BIT_FILES := $(ALTERA_BIT_FILES) $(XILINX_BIT_FILES)
+EFINIX_PARTS := t8f81 t13f256 ti180j484
+EFINIX_BIT_FILES := $(addsuffix .bit.gz, $(addprefix spiOverJtag_efinix_, $(EFINIX_PARTS)))
+
+BIT_FILES := $(ALTERA_BIT_FILES) $(EFINIX_BIT_FILES) $(XILINX_BIT_FILES)
 
 all: $(BIT_FILES)
 
-$(XILINX_BIT_FILES) : spiOverJtag_%.bit.gz : tmp_%/spiOverJtag.bit
+$(EFINIX_BIT_FILES) : spiOverJtag_efinix_%.bit.gz : tmp_efinix_%/efinix_spiOverJtag.bit
 	gzip -9 -c $< > $@
-tmp_%/spiOverJtag.bit : xilinx_spiOverJtag.v
+tmp_efinix_%/efinix_spiOverJtag.bit : efinix_spiOverJtag.v
+	./efinix_build.py --device $*
+
+$(XILINX_BIT_FILES) : spiOverJtag_%.bit.gz : tmp_%/spiOverJtag.bit
+
+tmp_%/spiOverJtag.bit : xilinx_spiOverJtag.v spiOverJtag_core.v
 	./build.py $*
 
 $(ALTERA_BIT_FILES): spiOverJtag_%.rbf.gz: tmp_%/spiOverJtag.rbf

spiOverJtag/altera_spiOverJtag.v

@@ -19,6 +19,8 @@ module spiOverJtag ();
 		.INTENDED_DEVICE_FAMILY  ("Cyclone IV E"),
 `elsif cyclonev
 		.INTENDED_DEVICE_FAMILY  ("Cyclone V"),
+`elsif stratixv
+		.INTENDED_DEVICE_FAMILY  ("Stratix V"),
 `endif
 		.ENHANCED_MODE           (1),
 		.ENABLE_SHARED_ACCESS    ("ON"),

spiOverJtag/build.py

@@ -1,6 +1,41 @@
 #!/usr/bin/env python3
-from edalize.edatool import get_edatool
+
 import os
+import re
+
+from edalize.edatool import get_edatool
+
+packages = {
+    "Artix": {
+        "xc7a12t"  : ["cpg238", "csg325"],
+        "xc7a15t"  : ["cpg236", "csg324", "csg325", "ftg256", "fgg484"],
+        "xc7a25t"  : ["cpg238", "csg325"],
+        "xc7a35t"  : ["cpg236", "csg324", "csg325", "ftg256", "fgg484"],
+        "xc7a50t"  : ["cpg236", "csg324", "csg325", "ftg256", "fgg484"],
+        "xc7a75t"  : ["csg324", "ftg256", "fgg484", "fgg676"],
+        "xc7a100t" : ["csg324", "ftg256", "fgg484", "fgg676"],
+        "xc7a200t" : ["sbg484", "fbg484", "fbg676", "ffg1156"],
+    },
+    # Added but seems not possible to use same bitstream
+    # for all Kintex with the same size but different package.
+    "Kintex 7": {
+        "xc7k70t"  : ["fbg484", "fbg676"],
+        "xc7k160t" : ["fbg484", "fbg676", "ffg676"],
+        "xc7k325t" : ["fbg676", "ffg676", "fbg900", "ffg900"],
+        "xc7k355t" : ["ffg901"],
+        "xc7k410t" : ["fbg676", "ffg676", "fbg900", "ffg900"],
+        "xc7k420t" : ["ffg901", "ffg1156"],
+        "xc7k480t" : ["ffg901", "ffg1156"],
+    },
+    "Spartan 7": {
+        "xc7s6"   : ["ftgb196", "cpga196", "csga225"],
+        "xc7s15"  : ["ftgb196", "cpga196", "csga225"],
+        "xc7s25"  : ["ftgb196", "csga225", "csga324"],
+        "xc7s50"  : ["ftgb196", "csga324", "fgga484"],
+        "xc7s75"  : ["fgga484", "fgga676"],
+        "xc7s100" : ["fgga484", "fgga676"],
+    },
+}
 
 if len(os.sys.argv) != 2:
     print("missing board param")
@@ -16,9 +51,12 @@ if not os.path.isdir(build_dir):
     else:
         print ("Successfully created the directory %s " % build_dir)
 
-currDir = os.path.abspath(os.path.curdir) + '/'
-files = []
+currDir    = os.path.abspath(os.path.curdir) + '/'
+files      = []
 parameters = {}
+pkg_name   = None
+pkg        = None
+model      = ""
 
 subpart = part[0:4].lower()
 if subpart == '10cl':
@@ -32,9 +70,15 @@ elif subpart[0:2] == '5c':
     tool = "quartus"
     files.append({'name': currDir + 'constr_cycloneV.tcl',
                   'file_type': 'tclSource'})
+elif subpart[0:2] == '5s':
+    family = "Stratix V"
+    tool = "quartus"
+    files.append({'name': currDir + 'constr_cycloneV.tcl',
+                  'file_type': 'tclSource'})
 elif subpart == "xc7a":
     family = "Artix"
-    tool = "vivado"
+    tool   = "vivado"
+    model  = subpart
 elif subpart == "xc7v":
     family = "Virtex 7"
     tool = "vivado"
@@ -47,9 +91,11 @@ elif subpart == "xc7k":
         family = "Kintex7"
         tool = "ise"
     speed = -2
+    model = subpart
 elif subpart == "xc7s":
     family = "Spartan 7"
-    tool = "vivado"
+    tool   = "vivado"
+    model  = subpart
 elif subpart == "xc6s":
     family = "Spartan6"
     tool = "ise"
@@ -62,13 +108,23 @@ elif subpart == "xc6v":
     family = "Virtex6"
     tool = "ise"
     speed = -1
-elif subpart in ["xcvu", "xcku"]:
+elif subpart in ["xcvu", "xcku", "xcau"]:
     family = "Xilinx UltraScale"
     tool = "vivado"
 else:
     print("Error: unknown device")
     os.sys.exit()
 
+if model in ["xc7a", "xc7s"]:
+    pkg      = packages[family][part][0]
+    pkg_name = f"{model}_{pkg}"
+if model in ["xc7k"]:
+    m        = re.match(r"(xc7k\d+t)(\w+)", part)
+    pkg      = m.group(2)
+    pkg_name = f"{model}_{pkg}"
+    if tool == "ise":
+        model = m.group(1)
+
 if tool in ["ise", "vivado"]:
     pkg_name = {
         "xc3s500evq100"    : "xc3s_vq100",
@@ -76,42 +132,23 @@ if tool in ["ise", "vivado"]:
         "xc6slx9csg324"    : "xc6s_csg324",
         "xc6slx16ftg256"   : "xc6s_ftg256",
         "xc6slx16csg324"   : "xc6s_csg324",
+        "xc6slx25csg324"   : "xc6s_csg324",
+        "xc6slx25tcsg324"  : "xc6s_t_csg324",
         "xc6slx45csg324"   : "xc6s_csg324",
+        "xc6slx45tfgg484"  : "xc6s_t_fgg484",
         "xc6slx100fgg484"  : "xc6s_fgg484",
         "xc6slx150tcsg484" : "xc6s_csg484",
         "xc6slx150tfgg484" : "xc6s_t_fgg484",
         "xc6vlx130tff784"  : "xc6v_ff784",
-        "xc7a15tcpg236"    : "xc7a_cpg236",
-        "xc7a25tcpg238"    : "xc7a_cpg238",
-        "xc7a25tcsg325"    : "xc7a_csg325",
-        "xc7a35tcpg236"    : "xc7a_cpg236",
-        "xc7a35tcsg324"    : "xc7a_csg324",
-        "xc7a35tftg256"    : "xc7a_ftg256",
-        "xc7a35tfgg484"    : "xc7a_fgg484",
-        "xc7a50tcpg236"    : "xc7a_cpg236",
-        "xc7a50tcsg324"    : "xc7a_csg324",
-        "xc7a50tfgg484"	   : "xc7a_fgg484",
-        "xc7a75tfgg484"    : "xc7a_fgg484",
-        "xc7a100tcsg324"   : "xc7a_csg324",
-        "xc7a100tfgg484"   : "xc7a_fgg484",
-        "xc7a100tfgg676"   : "xc7a_fgg676",
-        "xc7a200tsbg484"   : "xc7a_sbg484",
-        "xc7a200tfbg484"   : "xc7a_fbg484",
-        "xc7k70tfbg484"    : "xc7k_fbg484",
-        "xc7k70tfbg676"    : "xc7k_fbg676",
-        "xc7k160tffg676"   : "xc7k_ffg676",
-        "xc7k325tffg676"   : "xc7k_ffg676",
-        "xc7k325tffg900"   : "xc7k_ffg900",
-        "xc7k420tffg901"   : "xc7k_ffg901",
         "xc7vx330tffg1157" : "xc7v_ffg1157",
-        "xc7s25csga225"    : "xc7s_csga225",
-        "xc7s25csga324"    : "xc7s_csga324",
-        "xc7s50csga324"    : "xc7s_csga324",
-        "xcvu9p-flga2104" : "xcvu9p_flga2104",
+        "xcku040-ffva1156" : "xcku040_ffva1156",
+        "xcku060-ffva1156" : "xcku060_ffva1156",
+        "xcvu9p-flga2104"  : "xcvu9p_flga2104",
         "xcvu37p-fsvh2892" : "xcvu37p_fsvh2892",
-        "xcku3p-ffva676" : "xcku3p_ffva676",
-        "xcku5p-ffvb676" : "xcku5p_ffvb676",
-        }[part]
+        "xcku3p-ffva676"   : "xcku3p_ffva676",
+        "xcku5p-ffvb676"   : "xcku5p_ffvb676",
+        "xcau15p-ffvb676"  : "xcau15p_ffvb676",
+    }.get(part, pkg_name)
     if tool == "ise":
         cst_type = "UCF"
         tool_options = {'family': family,
@@ -121,35 +158,38 @@ if tool in ["ise", "vivado"]:
                             "xc6slx9csg324":    "xc6slx9",
                             "xc6slx16ftg256":   "xc6slx16",
                             "xc6slx16csg324":   "xc6slx16",
+                            "xc6slx25csg324":   "xc6slx25",
+                            "xc6slx25tcsg324":  "xc6slx25t",
                             "xc6slx45csg324":   "xc6slx45",
+                            "xc6slx45tfgg484":  "xc6slx45t",
                             "xc6slx100fgg484":  "xc6slx100",
                             "xc6slx150tcsg484": "xc6slx150t",
                             "xc6slx150tfgg484": "xc6slx150t",
                             "xc6vlx130tff784":  "xc6vlx130t",
-                            "xc7k325tffg676":   "xc7k325t",
-                            "xc7k325tffg900":   "xc7k325t",
-                            "xc7k420tffg901":   "xc7k420t",
-                            }[part],
+                            }.get(part, model),
                         'package': {
                             "xc3s500evq100":    "vq100",
                             "xc6slx9tqg144":    "tqg144",
                             "xc6slx9csg324":    "csg324",
                             "xc6slx16ftg256":   "ftg256",
                             "xc6slx16csg324":   "csg324",
+                            "xc6slx25csg324":   "csg324",
+                            "xc6slx25tcsg324":  "csg324",
                             "xc6slx45csg324":   "csg324",
+                            "xc6slx45tfgg484":  "fgg484",
                             "xc6slx100fgg484":  "fgg484",
                             "xc6slx150tcsg484": "csg484",
                             "xc6slx150tfgg484": "fgg484",
                             "xc6vlx130tff784":  "ff784",
-                            "xc7k325tffg676":   "ffg676",
-                            "xc7k325tffg900":   "ffg900",
-                            "xc7k420tffg901":   "ffg901",
-                            }[part],
+                            }.get(part, pkg),
                         'speed' : speed
                 }
     else:
         cst_type = "xdc"
-        if family == "Xilinx UltraScale":
+        # Artix/Spartan 7 Specific use case:
+        if family in ["Artix", "Spartan 7"]:
+            tool_options = {'part': f"{part}{pkg}-1"}
+        elif family == "Xilinx UltraScale":
             if part in ["xcvu9p-flga2104", "xcku5p-ffvb676"]:
                 tool_options = {'part': part + '-1-e'}
                 parameters["secondaryflash"]= {
@@ -161,32 +201,50 @@ if tool in ["ise", "vivado"]:
                 tool_options = {'part': part + '-2-e'}
             elif part == "xcvu37p-fsvh2892":
                 tool_options = {'part': part + '-2L-e'}
+            elif part in ["xcku040-ffva1156", "xcku060-ffva1156"]:
+                tool_options = {'part': part + '-2-e'}
+                parameters["secondaryflash"]= {
+                    'datatype': 'int',
+                    'paramtype': 'vlogdefine',
+                    'description': 'secondary flash',
+                    'default': 1}
+            elif part == "xcau15p-ffvb676":
+                tool_options = {'part': part + '-2-e'}
         else:
             tool_options = {'part': part + '-1'}
+
     cst_file = currDir + "constr_" + pkg_name + "." + cst_type.lower()
     files.append({'name': currDir + 'xilinx_spiOverJtag.v',
                   'file_type': 'verilogSource'})
     files.append({'name': cst_file, 'file_type': cst_type})
 else:
     full_part = {
-        "10cl016484": "10CL016YU484C8G",
-        "10cl025256": "10CL025YU256C8G",
-        "10cl055484": "10CL055YU484C8G",
-        "ep4ce11523": "EP4CE115F23C7",
-        "ep4ce2217" : "EP4CE22F17C6",
-        "ep4ce1523" : "EP4CE15F23C8",
-        "5ce223"    : "5CEFA2F23I7",
-        "5ce523"    : "5CEFA5F23I7",
-        "5ce423"    : "5CEBA4F23C8",
-        "5ce927"    : "5CEBA9F27C7",
-        "5cse423"   : "5CSEMA4U23C6",
-        "5cse623"   : "5CSEBA6U23I7"}[part]
+        "10cl016484" : "10CL016YU484C8G",
+        "10cl025256" : "10CL025YU256C8G",
+        "10cl055484" : "10CL055YU484C8G",
+        "ep4cgx15027": "EP4CGX150DF27I7",
+        "ep4ce11523" : "EP4CE115F23C7",
+        "ep4ce2217"  : "EP4CE22F17C6",
+        "ep4ce1523"  : "EP4CE15F23C8",
+        "ep4ce1017"  : "EP4CE10F17C8",
+        "ep4ce622"   : "EP4CE6E22C8",
+        "5ce215"     : "5CEBA2U15C8",
+        "5ce223"     : "5CEFA2F23I7",
+        "5ce523"     : "5CEFA5F23I7",
+        "5ce423"     : "5CEBA4F23C8",
+        "5ce927"     : "5CEBA9F27C7",
+        "5cse423"    : "5CSEMA4U23C6",
+        "5cse623"    : "5CSEBA6U23I7",
+        "5sgsd5"     : "5SGSMD5K2F40I3"}[part]
     files.append({'name': currDir + 'altera_spiOverJtag.v',
                   'file_type': 'verilogSource'})
     files.append({'name': currDir + 'altera_spiOverJtag.sdc',
                   'file_type': 'SDC'})
     tool_options = {'device': full_part, 'family':family}
 
+files.append({'name': currDir + 'spiOverJtag_core.v',
+              'file_type': 'verilogSource'})
+
 parameters[family.lower().replace(' ', '')]= {
     'datatype': 'int',
     'paramtype': 'vlogdefine',
@@ -204,7 +262,20 @@ backend = get_edatool(tool)(edam=edam, work_root=build_dir)
 backend.configure()
 backend.build()
 
-if tool == "vivado":
+if tool in ["vivado", "ise"]:
     import shutil
-    shutil.copy("tmp_" + part + "/spiOverJtag.runs/impl_1/spiOverJtag.bit",
-            "tmp_" + part);
+    import subprocess
+    import gzip
+
+    # Compress bitstream.
+    with open(f"tmp_{part}/spiOverJtag.bit", 'rb') as bit:
+        with gzip.open(f"spiOverJtag_{part}.bit.gz", 'wb', compresslevel=9) as bit_gz:
+            shutil.copyfileobj(bit, bit_gz)
+
+    # Create Symbolic links for all supported packages.
+    if family in ["Artix", "Spartan 7"]:
+        in_file = f"spiOverJtag_{part}.bit.gz"
+        for pkg in packages[family][part]:
+            out_file = f"spiOverJtag_{part}{pkg}.bit.gz"
+            if not os.path.exists(out_file):
+                subprocess.run(["ln", "-s", in_file, out_file])

spiOverJtag/constr_xc6s_t_csg324.ucf

@@ -0,0 +1,11 @@
+CONFIG VCCAUX = "2.5";
+
+NET "sdi_dq0"  LOC = T13 | IOSTANDARD = LVCMOS25;
+NET "sdo_dq1"  LOC = R13 | IOSTANDARD = LVCMOS25;
+NET "wpn_dq2"  LOC = T14 | IOSTANDARD = LVCMOS25;
+NET "hldn_dq3" LOC = V14 | IOSTANDARD = LVCMOS25;
+NET "csn"      LOC = V3  | IOSTANDARD = LVCMOS25;
+NET "sck"      LOC = R15 | IOSTANDARD = LVCMOS25;
+
+NET "sck" TNM_NET = "PRDsck";
+TIMESPEC "TSsck" = PERIOD "PRDsck" 6 ns HIGH 50%;

spiOverJtag/constr_xc7a_cpg236.xdc

@@ -2,9 +2,12 @@ set_property CFGBVS VCCO [current_design]
 set_property CONFIG_VOLTAGE 3.3 [current_design]
 set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
 set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
 set_property -dict {PACKAGE_PIN K19 IOSTANDARD LVCMOS33} [get_ports {csn}];
 set_property -dict {PACKAGE_PIN D18 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
 set_property -dict {PACKAGE_PIN D19 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN G18 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN F18 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_cpg238.xdc

@@ -9,3 +9,5 @@ set_property -dict {PACKAGE_PIN D19 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN E19 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN F19 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_csg324.xdc

@@ -8,3 +8,6 @@ set_property -dict {PACKAGE_PIN K17 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
 set_property -dict {PACKAGE_PIN K18 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN L14 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN M14 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_csg325.xdc

@@ -9,3 +9,5 @@ set_property -dict {PACKAGE_PIN L17 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN J15 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN J16 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7a_csg325_1v35.xdc

@@ -0,0 +1,24 @@
+set_property CFGBVS GND [current_design]
+set_property CONFIG_VOLTAGE 1.8 [current_design]
+set_property BITSTREAM.CONFIG.CONFIGRATE 16 [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property CONFIG_MODE SPIx4 [current_design]
+set_property BITSTREAM.CONFIG.SPI_32BIT_ADDR NO [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH 4 [current_design]
+set_property BITSTREAM.CONFIG.M1PIN PULLNONE [current_design]
+set_property BITSTREAM.CONFIG.M2PIN PULLNONE [current_design]
+set_property BITSTREAM.CONFIG.M0PIN PULLNONE [current_design]
+
+set_property BITSTREAM.CONFIG.USR_ACCESS TIMESTAMP [current_design]
+set_property BITSTREAM.CONFIG.UNUSEDPIN PULLDOWN [current_design]
+set_property BITSTREAM.CONFIG.OVERTEMPPOWERDOWN ENABLE [current_design]
+
+set_property -dict {PACKAGE_PIN L15 IOSTANDARD SSTL135_R} [get_ports csn]
+set_property -dict {PACKAGE_PIN K16 IOSTANDARD SSTL135_R} [get_ports sdi_dq0]
+set_property -dict {PACKAGE_PIN L17 IOSTANDARD SSTL135_R} [get_ports sdo_dq1]
+set_property -dict {PACKAGE_PIN J15 IOSTANDARD SSTL135_R} [get_ports wpn_dq2]
+set_property -dict {PACKAGE_PIN J16 IOSTANDARD SSTL135_R} [get_ports hldn_dq3]
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7a_fbg484.xdc

@@ -9,3 +9,5 @@ set_property -dict {PACKAGE_PIN R22 IOSTANDARD LVTTL} [get_ports {sdo_dq1}]
 set_property -dict {PACKAGE_PIN P21 IOSTANDARD LVTTL} [get_ports {wpn_dq2}]
 set_property -dict {PACKAGE_PIN R21 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_fbg676.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN P18 IOSTANDARD LVTTL} [get_ports {csn}]
+set_property -dict {PACKAGE_PIN R14 IOSTANDARD LVTTL} [get_ports {sdi_dq0}]
+set_property -dict {PACKAGE_PIN R15 IOSTANDARD LVTTL} [get_ports {sdo_dq1}]
+set_property -dict {PACKAGE_PIN P14 IOSTANDARD LVTTL} [get_ports {wpn_dq2}]
+set_property -dict {PACKAGE_PIN N14 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_fgg484.xdc

@@ -1,6 +1,7 @@
 set_property CFGBVS VCCO [current_design]
 set_property CONFIG_VOLTAGE 3.3 [current_design]
 set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
 
 set_property -dict {PACKAGE_PIN T19 IOSTANDARD LVTTL} [get_ports {csn}]
 set_property -dict {PACKAGE_PIN P22 IOSTANDARD LVTTL} [get_ports {sdi_dq0}]
@@ -8,3 +9,5 @@ set_property -dict {PACKAGE_PIN R22 IOSTANDARD LVTTL} [get_ports {sdo_dq1}]
 set_property -dict {PACKAGE_PIN P21 IOSTANDARD LVTTL} [get_ports {wpn_dq2}]
 set_property -dict {PACKAGE_PIN R21 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_fgg676.xdc

@@ -3,9 +3,11 @@ set_property CONFIG_VOLTAGE 3.3 [current_design]
 set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
 set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
 
-set_property -dict {PACKAGE_PIN T19 IOSTANDARD LVTTL} [get_ports {csn}]
+set_property -dict {PACKAGE_PIN P18 IOSTANDARD LVTTL} [get_ports {csn}]
 set_property -dict {PACKAGE_PIN R14 IOSTANDARD LVTTL} [get_ports {sdi_dq0}]
 set_property -dict {PACKAGE_PIN R15 IOSTANDARD LVTTL} [get_ports {sdo_dq1}]
 set_property -dict {PACKAGE_PIN P14 IOSTANDARD LVTTL} [get_ports {wpn_dq2}]
-set_property -dict {PACKAGE_PIN P18 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
+set_property -dict {PACKAGE_PIN N14 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
 
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_ftg256.xdc

@@ -8,3 +8,6 @@ set_property -dict {PACKAGE_PIN J13 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
 set_property -dict {PACKAGE_PIN J14 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN K15 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN K16 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK}]
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK}]

spiOverJtag/constr_xc7a_sbg384.xdc

@@ -7,3 +7,6 @@ set_property -dict {PACKAGE_PIN P22 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}]
 set_property -dict {PACKAGE_PIN R22 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}]
 set_property -dict {PACKAGE_PIN P21 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}]
 set_property -dict {PACKAGE_PIN R21 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}]
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7a_sbg484.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN T19 IOSTANDARD LVTTL} [get_ports {csn}]
+set_property -dict {PACKAGE_PIN P22 IOSTANDARD LVTTL} [get_ports {sdi_dq0}]
+set_property -dict {PACKAGE_PIN R22 IOSTANDARD LVTTL} [get_ports {sdo_dq1}]
+set_property -dict {PACKAGE_PIN P21 IOSTANDARD LVTTL} [get_ports {wpn_dq2}]
+set_property -dict {PACKAGE_PIN R21 IOSTANDARD LVTTL} [get_ports {hldn_dq3}]
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_cpga196.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN D13 IOSTANDARD LVCMOS33} [get_ports {csn}];
+set_property -dict {PACKAGE_PIN C10 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
+set_property -dict {PACKAGE_PIN C11 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
+set_property -dict {PACKAGE_PIN B11 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
+set_property -dict {PACKAGE_PIN A12 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_csga225.xdc

@@ -8,3 +8,6 @@ set_property -dict {PACKAGE_PIN H14 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
 set_property -dict {PACKAGE_PIN H15 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN J12 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN K13 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_csga324.xdc

@@ -8,3 +8,6 @@ set_property -dict {PACKAGE_PIN K17 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
 set_property -dict {PACKAGE_PIN K18 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
 set_property -dict {PACKAGE_PIN L14 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
 set_property -dict {PACKAGE_PIN M15 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_fgga484.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN N17 IOSTANDARD LVCMOS33} [get_ports {csn}];
+set_property -dict {PACKAGE_PIN M21 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
+set_property -dict {PACKAGE_PIN M22 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
+set_property -dict {PACKAGE_PIN N21 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
+set_property -dict {PACKAGE_PIN N22 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_fgga676.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN R20 IOSTANDARD LVCMOS33} [get_ports {csn}];
+set_property -dict {PACKAGE_PIN N23 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
+set_property -dict {PACKAGE_PIN N24 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
+set_property -dict {PACKAGE_PIN P23 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
+set_property -dict {PACKAGE_PIN R23 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xc7s_ftgb196.xdc

@@ -0,0 +1,13 @@
+set_property CFGBVS VCCO [current_design]
+set_property CONFIG_VOLTAGE 3.3 [current_design]
+set_property BITSTREAM.CONFIG.SPI_BUSWIDTH {4} [current_design]
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+
+set_property -dict {PACKAGE_PIN C11 IOSTANDARD LVCMOS33} [get_ports {csn}];
+set_property -dict {PACKAGE_PIN B11 IOSTANDARD LVCMOS33} [get_ports {sdi_dq0}];
+set_property -dict {PACKAGE_PIN B12 IOSTANDARD LVCMOS33} [get_ports {sdo_dq1}];
+set_property -dict {PACKAGE_PIN D10 IOSTANDARD LVCMOS33} [get_ports {wpn_dq2}];
+set_property -dict {PACKAGE_PIN C10 IOSTANDARD LVCMOS33} [get_ports {hldn_dq3}];
+
+create_clock -period 33.000 -name jtag_tck -waveform {0.000 16.500} [get_pins {bscane2_inst/DRCK]}}
+create_clock -period 33.000 -name vers_tck -waveform {0.000 16.500} [get_pins {bscane2_version/DRCK]}}

spiOverJtag/constr_xcau15p_ffvb676.xdc

@@ -0,0 +1,7 @@
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+set_property CONFIG_VOLTAGE 1.8 [current_design]
+# Table 1-2 from UG570
+set_property CFGBVS GND [current_design]
+
+# Primary QSPI flash
+# Connection done through the STARTUPE3 block

spiOverJtag/constr_xcku040_ffva1156.xdc

@@ -0,0 +1,25 @@
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+set_property CONFIG_VOLTAGE 1.8 [current_design]
+# Table 1-5 from UG917
+set_property CFGBVS GND [current_design]
+
+# Primary QSPI flash
+# Connection done through the STARTUPE3 block
+# sdi_dq0  - PACKAGE_PIN AC7      - QSPI0_IO0                 Bank   0 - D00_MOSI_0
+# sdo_dq1  - PACKAGE_PIN AB7      - QSPI0_IO1                 Bank   0 - D01_DIN_0
+# wpn_dq2  - PACKAGE_PIN AA7      - QSPI0_IO2                 Bank   0 - D02_0
+# hldn_dq3 - PACKAGE_PIN Y7       - QSPI0_IO3                 Bank   0 - D03_0
+# csn      - PACKAGE_PIN U7       - QSPI0_CSB                 Bank   0 - RDWR_FCS_B_0
+# sck      - PACKAGE_PIN AA9      - FPGA_CCLK                 Bank   0 - CCLK_0
+
+# Secondary QSPI flash
+set_property PACKAGE_PIN M20       [get_ports "sdi_sec_dq0"] ;# Bank  65 VCCO - VCC1V8   - IO_L22P_T3U_N6_DBC_AD0P_D04_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "sdi_sec_dq0"] ;# Bank  65 VCCO - VCC1V8   - IO_L22P_T3U_N6_DBC_AD0P_D04_65
+set_property PACKAGE_PIN L20       [get_ports "sdo_sec_dq1"] ;# Bank  65 VCCO - VCC1V8   - IO_L22N_T3U_N7_DBC_AD0N_D05_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "sdo_sec_dq1"] ;# Bank  65 VCCO - VCC1V8   - IO_L22N_T3U_N7_DBC_AD0N_D05_65
+set_property PACKAGE_PIN R21       [get_ports "wpn_sec_dq2"] ;# Bank  65 VCCO - VCC1V8   - IO_L21P_T3L_N4_AD8P_D06_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "wpn_sec_dq2"] ;# Bank  65 VCCO - VCC1V8   - IO_L21P_T3L_N4_AD8P_D06_65
+set_property PACKAGE_PIN R22       [get_ports "hldn_sec_dq3"] ;# Bank  65 VCCO - VCC1V8   - IO_L21N_T3L_N5_AD8N_D07_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "hldn_sec_dq3"] ;# Bank  65 VCCO - VCC1V8   - IO_L21N_T3L_N5_AD8N_D07_65
+set_property PACKAGE_PIN G26       [get_ports "csn_sec"] ;# Bank  65 VCCO - VCC1V8   - IO_L2N_T0L_N3_FWE_FCS2_B_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "csn_sec"] ;# Bank  65 VCCO - VCC1V8   - IO_L2N_T0L_N3_FWE_FCS2_B_65

spiOverJtag/constr_xcku060_ffva1156.xdc

@@ -0,0 +1,25 @@
+set_property BITSTREAM.GENERAL.COMPRESS TRUE [current_design]
+set_property CONFIG_VOLTAGE 1.8 [current_design]
+# Table 1-5 from UG917
+set_property CFGBVS GND [current_design]
+
+# Primary QSPI flash
+# Connection done through the STARTUPE3 block
+# sdi_dq0  - PACKAGE_PIN AC7      - QSPI0_IO0                 Bank   0 - D00_MOSI_0
+# sdo_dq1  - PACKAGE_PIN AB7      - QSPI0_IO1                 Bank   0 - D01_DIN_0
+# wpn_dq2  - PACKAGE_PIN AA7      - QSPI0_IO2                 Bank   0 - D02_0
+# hldn_dq3 - PACKAGE_PIN Y7       - QSPI0_IO3                 Bank   0 - D03_0
+# csn      - PACKAGE_PIN U7       - QSPI0_CSB                 Bank   0 - RDWR_FCS_B_0
+# sck      - PACKAGE_PIN AA9      - FPGA_CCLK                 Bank   0 - CCLK_0
+
+# Secondary QSPI flash
+set_property PACKAGE_PIN M20       [get_ports "sdi_sec_dq0"] ;# Bank  65 VCCO - VCC1V8   - IO_L22P_T3U_N6_DBC_AD0P_D04_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "sdi_sec_dq0"] ;# Bank  65 VCCO - VCC1V8   - IO_L22P_T3U_N6_DBC_AD0P_D04_65
+set_property PACKAGE_PIN L20       [get_ports "sdo_sec_dq1"] ;# Bank  65 VCCO - VCC1V8   - IO_L22N_T3U_N7_DBC_AD0N_D05_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "sdo_sec_dq1"] ;# Bank  65 VCCO - VCC1V8   - IO_L22N_T3U_N7_DBC_AD0N_D05_65
+set_property PACKAGE_PIN R21       [get_ports "wpn_sec_dq2"] ;# Bank  65 VCCO - VCC1V8   - IO_L21P_T3L_N4_AD8P_D06_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "wpn_sec_dq2"] ;# Bank  65 VCCO - VCC1V8   - IO_L21P_T3L_N4_AD8P_D06_65
+set_property PACKAGE_PIN R22       [get_ports "hldn_sec_dq3"] ;# Bank  65 VCCO - VCC1V8   - IO_L21N_T3L_N5_AD8N_D07_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "hldn_sec_dq3"] ;# Bank  65 VCCO - VCC1V8   - IO_L21N_T3L_N5_AD8N_D07_65
+set_property PACKAGE_PIN G26       [get_ports "csn_sec"] ;# Bank  65 VCCO - VCC1V8   - IO_L2N_T0L_N3_FWE_FCS2_B_65
+set_property IOSTANDARD  LVCMOS18  [get_ports "csn_sec"] ;# Bank  65 VCCO - VCC1V8   - IO_L2N_T0L_N3_FWE_FCS2_B_65

spiOverJtag/efinix_build.py

@@ -0,0 +1,186 @@
+#!/usr/bin/env python3
+
+import argparse
+import datetime
+import os
+import pathlib
+import pprint
+import re
+import sys
+
+from edalize.edatool import get_edatool
+from edalize.flows.efinity import Efinity
+
+#from xml.dom import expatbuilder
+#import xml.etree.ElementTree as et
+
+#efinity_home = os.environ["EFINITY_HOME"]
+#script_path  = efinity_home + "/scripts" 
+curr_path = os.getcwd()
+
+efinix_pinout = {
+    "Trion": {
+        "F49": { # t4/t8
+            "ss_n": "G3", "cclk": "F3", "cdi0": "F2", "cdi1": "F1", "cdi2": "E2", "cdi3": "D2",
+        },
+        "F81": { # t4/t8
+            "ss_n": "J4", "cclk": "H4", "cdi0": "F4", "cdi1": "H3", "cdi2": "J2", "cdi3": "F3",
+        },
+        "F169": { # t13/t20
+            "ss_n": "L1", "cclk": "K1", "cdi0": "J1", "cdi1": "J2", "cdi2": "F1", "cdi3": "G2",
+        },
+        "F256": { # t13/t20
+            "ss_n": "P3", "cclk": "H3", "cdi0": "L3", "cdi1": "N1", "cdi2": "K4", "cdi3": "L2",
+        },
+        "F324": { # t20/t85/t120
+            "ss_n": "P15", "cclk": "N13", "cdi0": "M13", "cdi1": "N14", "cdi2": "K14", "cdi3": "K18",
+        },
+        "F400": { # t20/
+            "ss_n": "W18", "cclk": "W19", "cdi0": "Y17", "cdi1": "Y18", "cdi2": "P15", "cdi3": "R17",
+        },
+        "Q100": { # t13/t20
+            "ss_n": "24", "cclk": "26", "cdi0": "19", "cdi1": "18", "cdi2": "8", "cdi3": "14",
+        },
+        "Q144": { # t20/
+            "ss_n": "31", "cclk": "30", "cdi0": "29", "cdi1": "28", "cdi2": "20", "cdi3": "19",
+        },
+        "W80": { # t20/
+            "ss_n": "K3", "cclk": "K2", "cdi0": "J1", "cdi1": "J2", "cdi2": "F1", "cdi3": "G2",
+        },
+    },
+    "Titanium": {
+        "J484": { # ti180, ...
+            "ss_n": "E2", "cclk": "J2", "cdi0": "G2", "cdi1": "H2", "cdi2": "F3", "cdi3": "G3",
+        },
+    },
+}
+
+timing_models = {
+    "T8F81": "C2",
+    "T13F256": "C3",
+    "TI180J484": "C3",
+}
+
+def gen_isf_constr(gateware_name, build_path, device_name, family, pkg):
+
+    # Basic settings
+    isf_array = [
+        "# Device setting",
+        "design.set_device_property(\"1A\",\"VOLTAGE\",\"3.3\",\"IOBANK\")",
+        "design.set_device_property(\"1B\",\"VOLTAGE\",\"3.3\",\"IOBANK\")",
+        "design.set_device_property(\"1C\",\"VOLTAGE\",\"1.1\",\"IOBANK\")",
+        "design.set_device_property(\"2A\",\"VOLTAGE\",\"3.3\",\"IOBANK\")",
+        "design.set_device_property(\"2B\",\"VOLTAGE\",\"3.3\",\"IOBANK\")",
+        "",
+    ]
+
+    # JTAG settings
+    isf_array.append("# ---------- JTAG 1 ---------")
+    isf_array.append("design.create_block(\"jtag_soc\", block_type=\"JTAG\")")
+    isf_array.append("design.assign_resource(\"jtag_soc\", \"JTAG_USER1\", \"JTAG\")")
+    jtag_pads = [
+        "CAPTURE", "DRCK", "RESET", "RUNTEST", "SEL", "SHIFT", "TCK", "TDI", "TMS", "UPDATE", "TDO"
+    ]
+
+    for pad in jtag_pads:
+        isf_array.append(f"design.set_property(\"jtag_soc\", \"{pad}\", \"jtag_1_{pad}\", \"JTAG\")")
+
+    # SPI pins settings
+    pins = efinix_pinout.get(family).get(pkg, None)
+    assert pins is not None
+    
+    pin_lst = [
+        {"name" : "csn",     "dir": "out", "pin": pins["ss_n"], "io_std": "3.3 V LVTTL / LVCMOS"},
+        {"name" : "sck",     "dir": "out", "pin": pins["cclk"], "io_std": "3.3 V LVTTL / LVCMOS"},
+        {"name" : "sdi_dq0", "dir": "out", "pin": pins["cdi0"], "io_std": "3.3 V LVTTL / LVCMOS"},
+        {"name" : "sdo_dq1", "dir": "in",  "pin": pins["cdi1"], "io_std": "3.3 V LVTTL / LVCMOS"},
+    ]
+    
+    for pin_cfg in pin_lst:
+        name = pin_cfg["name"]
+        pin_loc = pin_cfg["pin"]
+        if pin_cfg["dir"] == "in":
+            isf_array.append(f"design.create_input_gpio(\"{name}\")")
+        else:
+            isf_array.append(f"design.create_output_gpio(\"{name}\")")
+        isf_array.append(f"design.assign_pkg_pin(\"{name}\", \"{pin_loc}\")")
+    
+    isf_array.append("")
+
+    # Save ISF file
+    with open(os.path.join(build_dir, build_name+".isf"), "w") as fd:
+        fd.write("\n".join(isf_array))
+
+if __name__ == "__main__":
+    parser = argparse.ArgumentParser("SpiOverJtag for Efinix devices")
+    parser.add_argument("--device", help="Efinix Device")
+    args = parser.parse_args()
+
+    assert args.device is not None
+
+    device        = args.device.upper()
+    build_name    = "efinix_spiOverJtag"
+    build_dir     = os.path.join(curr_path, f"tmp_efinix_{device.lower()}")
+    timing_model  = timing_models.get(device, "C3")
+    sources       = [
+        {
+            'name': os.path.join(curr_path, "efinix_spiOverJtag.v"),
+            "file_type": "verilogSource",
+        },
+        {
+            'name': os.path.join(build_dir, "efinix_spiOverJtag.isf"),
+            "file_type": "ISF",
+        },
+    ]
+
+    force_restart = False
+
+    t = re.compile(r"(T[I]*)(\d+)(\w\d+)")
+    tt = t.match(device)
+    if tt is None:
+        print("fails")
+    else:
+        (fam, size, package) = tt.groups()
+        
+        assert fam in ["TI", "T"]
+
+        family = {True:"Titanium", False:"Trion"}[fam == "TI"]
+        if fam == "TI":
+            device = device.replace("TI", "Ti")
+
+        if os.path.exists(build_dir) and force_restart:
+            os.rmdir(build_dir)
+
+        if not os.path.exists(build_dir):
+            try:
+                os.mkdir(build_dir)
+            except FileExistsError:
+                pass
+
+        gen_isf_constr(
+            gateware_name = build_name,
+            build_path    = build_dir,
+            device_name   = device,
+            family        = family,
+            pkg           = package
+        )
+
+        tool_options = {
+            'part'   : device,
+            'family' : family,
+            'timing' : timing_model,
+        }
+
+        edam = {
+            'name'         : build_name,
+            'files'        : sources,
+            'flow_options' : tool_options,
+            'toplevel'     : 'spiOverJtag',
+        }
+        
+        backend = Efinity(edam=edam, work_root=build_dir)
+        backend.configure()
+        backend.build()
+
+        import shutil
+        shutil.copy(os.path.join(build_dir, "outflow", "efinix_spiOverJtag.bit"), build_dir)

spiOverJtag/spiOverJtag_core.v

@@ -0,0 +1,250 @@
+`default_nettype none
+/*
+ * JTAG: rising edge: sampling
+ *       falling esge: update
+ * SPI:
+ */
+
+module spiOverJtag_core (
+	/* JTAG state/controls */
+	input  wire sel,
+	input  wire capture,
+	input  wire update,
+	input  wire shift,
+	input  wire drck,
+	input  wire tdi,
+	output wire tdo,
+
+	/* JTAG endpoint to version */
+	input  wire ver_sel,
+	input  wire ver_cap,
+	input  wire ver_shift,
+	input  wire ver_drck,
+	input  wire ver_tdi,
+	output wire ver_tdo,
+	/* phys */
+	output reg  csn,
+	output wire sck,
+	output reg  sdi_dq0,
+	input  wire sdo_dq1,
+	output wire wpn_dq2,
+	output wire hldn_dq3,
+
+	/* debug signals */
+	output wire [ 6:0] dbg_header1,
+	output wire [13:0] dbg_header,
+	output wire [ 3:0] dbg_hdr_cnt,
+	output wire [ 2:0] dbg_jtag_state,
+	output wire        dbg_rst,
+	output wire        dbg_clk,
+	output wire        dbg_start_header,
+
+    output wire        dbg_ver_start,
+    output wire        dbg_ver_rst,
+    output wire        dbg_ver_state,
+    output wire [15:0] dbg_ver_cnt,
+    output wire [39:0] dbg_ver_shft
+);
+
+/* no global reset at start time:
+ * reset system at capture time (before shift)
+ * and at update time (after shift)
+ */
+wire rst = ((capture | update) & sel);
+
+/*
+ * if the FPGAs executing this code is somewhere in a complex
+ * JTAG chain first bit isn't necessary for him
+ * Fortunately dummy bits sent are equal to '0' -> we sent a 'start bit'
+ */
+wire start_header = (tdi & shift & sel);
+
+localparam hdr_len = 16;
+reg  [hdr_len-1:0] header;     /* number of bits to receive / send in XFER state */
+reg  [hdr_len-1:0] header_d;
+/* Primary header with mode and length LSB
+ * 6:5: mode (00: normal, 01: no header2, 10: infinite loop)
+ * 4:0: Byte length LSB
+ */
+reg  [        6:0] header1;
+reg  [        6:0] header1_d;
+wire [        6:0] header1_next = {tdi, header1[6:1]};
+wire [        1:0] mode         = header1[1:0];
+/* Secondary header with extended length */
+wire [hdr_len-1:0] header_next = {tdi, header[hdr_len-1:1]};
+reg  [        3:0] hdr_cnt; /* counter of bit received in RECV_HEADERx states */
+reg  [        3:0] hdr_cnt_d;
+
+/* ---------------- */
+/*       FSM        */
+/* ---------------- */
+
+localparam IDLE  = 3'b000,
+	RECV_HEADER1 = 3'b001,
+	RECV_HEADER2 = 3'b010,
+	XFER         = 3'b011,
+	WAIT_END     = 3'b100;
+
+reg [2:0] jtag_state, jtag_state_d;
+
+/*
+ * 1. receives 8bits (
+ */
+always @(*) begin
+	jtag_state_d = jtag_state;
+	hdr_cnt_d    = hdr_cnt;
+	header_d     = header;
+	header1_d    = header1;
+	case (jtag_state)
+		IDLE: begin /* nothing: wait for the 'start bit' */
+			hdr_cnt_d = 6;
+			if (start_header) begin
+				jtag_state_d = RECV_HEADER1;
+			end
+		end
+		RECV_HEADER1: begin /* first header with 1:0 : mode, 6:2: XFER length (LSB) */
+			hdr_cnt_d = hdr_cnt - 1'b1;
+			header1_d = header1_next;
+			if (hdr_cnt == 0) begin
+				if (header1_next[1:0] == 2'b00) begin
+					hdr_cnt_d    = 7;
+					header_d     = {header1_next[6:2], 3'b000, 8'd0};
+					jtag_state_d = RECV_HEADER2;
+				end else begin
+					header_d     = {8'b0, header1_next[6:2], 3'b000};
+					jtag_state_d = XFER;
+				end
+			end
+		end
+
+		RECV_HEADER2: begin /* fill a counter with 16bits (number of bits to pass to the flash) */
+			hdr_cnt_d = hdr_cnt - 1'b1;
+			header_d  = header_next;
+			if (hdr_cnt == 0) begin
+				jtag_state_d = XFER;
+			end
+		end
+		XFER: begin
+			header_d = header - 1;
+			if (header == 1 && mode != 2'b10)
+				jtag_state_d = WAIT_END;
+		end
+		WAIT_END: begin /* move to this state when header bits have been transfered to the SPI flash */
+		//	/* nothing to do: rst will move automagically state in IDLE */
+		end
+		default: begin
+			jtag_state_d = IDLE;
+		end
+	endcase
+end
+
+always @(posedge drck) begin
+	header  <= header_d;
+	header1 <= header1_d;
+	hdr_cnt <= hdr_cnt_d;
+end
+
+always @(posedge drck or posedge rst) begin
+	if (rst) begin
+		jtag_state <= IDLE;
+	end else begin
+		jtag_state <= jtag_state_d;
+	end
+end
+
+/* JTAG <-> phy SPI */
+always @(posedge drck or posedge rst) begin
+	if (rst) begin
+		sdi_dq0 <= 1'b0;
+		csn     <= 1'b1;
+	end else begin
+		sdi_dq0 <= tdi;
+		csn     <= ~(jtag_state == XFER);
+	end
+end
+
+assign sck      = ~drck;
+assign tdo      = sdo_dq1;
+assign wpn_dq2  = 1'b1;
+assign hldn_dq3 = 1'b1;
+
+/* ------------- */
+/*    Version    */
+/* ------------- */
+/* no global reset at start time: reset system at capture time (before shift) */
+wire ver_rst = (ver_cap & ver_sel);
+
+/* start bit */
+wire ver_start = (ver_tdi & ver_shift & ver_sel);
+
+localparam VER_VALUE = 40'h30_30_2E_32_30; // 02.00
+reg [ 6:0] ver_cnt, ver_cnt_d;
+reg [39:0] ver_shft, ver_shft_d;
+
+reg [2:0] ver_state, ver_state_d;
+always @(*) begin
+	ver_state_d = ver_state;
+	ver_cnt_d   = ver_cnt;
+    ver_shft_d  = ver_shft;
+	case (ver_state)
+		IDLE: begin /* nothing: wait for the 'start bit' */
+			ver_cnt_d = 6;
+			if (ver_start) begin
+				ver_state_d = RECV_HEADER1;
+			end
+		end
+		RECV_HEADER1: begin
+			ver_cnt_d = ver_cnt - 1'b1;
+			if (ver_cnt == 0) begin
+				ver_state_d = XFER;
+				ver_cnt_d   = 39;
+				ver_shft_d  = VER_VALUE;
+			end
+		end
+		XFER: begin
+			ver_cnt_d  = ver_cnt - 1;
+			ver_shft_d = {1'b1, ver_shft[39:1]};
+			if (ver_cnt == 0)
+				ver_state_d = WAIT_END;
+		end
+		WAIT_END: begin /* move to this state when header bits have been transfered to the SPI flash */
+		//  /* nothing to do: rst will move automagically state in IDLE */
+		end
+		default: begin
+			ver_state_d = IDLE;
+		end
+	endcase
+end
+
+always @(posedge ver_drck) begin
+	ver_cnt  <= ver_cnt_d;
+	ver_shft <= ver_shft_d;
+end
+
+always @(posedge ver_drck or posedge ver_rst) begin
+	if (ver_rst)
+		ver_state <= IDLE;
+	else
+		ver_state <= ver_state_d;
+end
+
+assign ver_tdo = ver_shft[0];
+
+/* --------- */
+/*   debug   */
+/* --------- */
+assign dbg_header1      = header1;
+assign dbg_header       = header;
+assign dbg_hdr_cnt      = hdr_cnt;
+assign dbg_jtag_state   = jtag_state;
+assign dbg_rst          = rst;
+assign dbg_clk          = ~drck;
+assign dbg_start_header = start_header;
+
+assign dbg_ver_start    = ver_start;
+assign dbg_ver_state    = ver_state;
+assign dbg_ver_cnt      = ver_cnt;
+assign dbg_ver_shft     = ver_shft;
+assign dbg_ver_rst      = ver_rst;
+
+endmodule