9d22d62a54
part/board: adding Avnet Mini-ITX
...
Adding the Avnet Mini-ITX dev board that uses the XC7Z100 Zynq-7000
device.
2023-08-07 17:06:02 +01:00
e3c8d6be1d
board: added QMTECH cyclone10 LP starter kit (10CL016YU484C8G)
2023-08-05 11:49:53 +02:00
91f2900f0c
add support for colorlight-i9+ board + spiOverJtag/spiOverJtag_xc7a50tfgg484.bit.gz
2023-06-30 11:36:32 +02:00
3e25a33346
boards: added support for 14bits 125MHz redpitaya board (7010)
2023-06-29 16:59:42 +02:00
9331bf7a6b
add sipeed tang nano 20k
2023-05-25 19:24:48 +08:00
873de96a3b
spiOverJtag: added efinix Titanium Ti60 support
2023-04-27 16:41:58 +02:00
07a0708eb8
efinix:
...
- jtag mode: added spiOverJtag support;
- spiOverJtag: added efinix support: verilog file and t8f81 bitstream
- xyloni: part code for spiOverJtag flash access/load bridge
2023-04-27 16:41:17 +02:00
4161c79920
Add Support for Xilinx KCU116 ( #322 )
...
* initial kcu116 support
* add kintex ultrascale plus family to xilinx.cpp
* add docs
* combine xcku and xcvu check
* rebuild bitstream for -1 speedgrade
2023-03-09 20:48:19 +01:00
cda14f24e3
board: hseda-xc6slx16
2023-03-04 17:55:02 +01:00
7de494f666
adding Opal Kelly XEM8320 board
2023-02-28 22:40:41 +01:00
f54781471b
Add initial support for VCU128
2023-02-19 18:39:14 +08:00
9a09e427e3
Added Lone Dynamics Schoko and Konfekt SBCs
2023-02-11 17:15:45 +01:00
5a00f0d184
part: Add all cyclone V variant
...
board: Add the Terasic C5G
2023-01-29 15:35:47 +01:00
e5481787d8
Fix VCU118 board part name and IR length
2023-01-21 14:45:50 +01:00
67563983f9
feat(board): add support for Terasic DE10-Lite
2023-01-09 15:52:54 -06:00
fdf4c94d83
boards: add Sitlinv STLV7325
...
Sitlinv STLV7325 is a board with XC7K325T-FFG676.
Add support for it.
The board does not have JTAG cables on board, however its vendor
provides an option to buy a FT4232-based JTAG cable with the board, so
the default cable is set to ft4232.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-01-06 15:22:43 +08:00
14fce33109
feat(board): add support for Arrow/Terasic DECA
2023-01-04 13:11:21 -06:00
cc1bc89f29
boards: Trenz TEI0010 - AnalogMax
2023-01-04 19:00:08 +01:00
0591af56b7
feat(board): add support for Trenz C10LP-RefKit
2022-12-25 15:53:45 -06:00
0bdef7bab1
typo's, added git as dependency
2022-12-18 13:56:54 +01:00
0855efb29f
Add initial support for the VCU118 board
2022-12-11 22:11:50 +01:00
e536634ada
adding LiteX-Acorn-Baseboards support
2022-12-11 20:39:32 +01:00
0048431fb2
ALINX AX516 board.
2022-11-26 23:05:30 +01:00
b078aa393a
adding nexys A7 (50/100) aka nexys 4 DDR
2022-11-23 13:47:07 +01:00
42193f1db8
boards: Add USRP X300 and X310
...
Signed-off-by: Martin Braun <martin.braun@ettus.com>
2022-11-22 20:15:16 +01:00
2da7696f19
Update board.hpp
2022-10-30 15:05:22 +02:00
b3e25bc650
Add support for xc7s_csga225 and the Digilent CMOD S7 board.
2022-09-30 22:27:20 +02:00
3c9792645e
add support for CmodA7-35T digilent fpga board
2022-09-30 21:17:45 +02:00
61e959f93d
main,board,ftdiJtagBitbang: use pin ID instead of shift
2022-08-23 18:37:43 +02:00
b4d343ce05
board: adding sipeed Tang Primer 20k
2022-07-26 20:25:43 +02:00
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
5295544200
Correct part number for ZCU106 board
2022-05-16 00:44:59 -06:00
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
3cef7f920d
board: Xilinx ZCU102
2022-03-19 10:08:51 +01:00
3210bcd9cb
Merge pull request #194 from infphyny/qmtech_5cefa5f23
...
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5…
2022-03-13 15:25:01 +01:00
2ed5eb5eec
Rename 5cefa5f23 to 5ce523, add documentation for board and fpga
2022-03-13 09:14:52 -04:00
7b36bdc893
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5f23.rbf.gz bitstream to write flash
2022-03-12 09:25:22 -05:00
15fb5ac591
board: PYNQ-Z2
2022-03-12 14:54:24 +01:00
259914910f
board: Xilinx ZC706
2022-03-10 18:53:41 +01:00
28ebc98b1b
board: add CERN SPEC150
2022-03-03 15:40:42 +01:00
3cfdfb1856
Update board.hpp
...
Use default cable. This is equivalent to 6MHz setting, albeit more versatile.
2022-02-21 23:05:37 -04:00
d4e8eef676
Add board and cable defaults for genesys2
2022-02-21 08:11:57 +00:00
7a7f1723ea
add support for colorlight-i9
2022-02-20 01:41:17 +01:00
6059c9dbfb
Remove the Tigard default cable, as the board does not have an on-board JTAG adapter.
2022-02-19 17:14:49 +10:30
7022e2101a
Add support for the QMTech Kintex7 Core Board
2022-02-19 14:22:55 +10:30
905e96dfec
Add digilent_zybo_z7 10/20 support
2022-02-15 21:01:11 -08:00
5aa34c6364
board: add Terasic DE1-SoC board
2022-02-09 17:22:38 +01:00
350570ad2d
board: add tangnano1k to board_list
2022-01-28 13:53:33 +02:00
db407a4263
adding xilinx AC701 development kit
2022-01-26 16:42:03 +01:00
f30cca46d8
no dash for zedboard fpga name
2022-01-26 16:29:35 +01:00
0d1905425c
add board zc702 in board.hpp
2022-01-26 16:21:52 +01:00
acf677dd46
tangnano9k: new board, with the same cable w/ tangnano4k
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2022-01-22 20:51:05 +08:00
ecc76baa97
board: alinx AXU2CGA
2022-01-13 08:55:26 +01:00
ce7f4566c3
board: ulx3s_dfu
2021-12-24 18:10:22 +01:00
fefea9fe8e
board: generic FTDI SPI
2021-12-22 19:12:02 +01:00
56a1e0310d
board: add arty S7 50
2021-12-21 18:21:39 +01:00
03c7d7faad
arty A7 100t support
2021-12-21 07:02:48 +01:00
f3e9a9fa6d
digilent_arty_z7 10/20 support
2021-12-20 18:10:17 +01:00
e026aa28c7
Digilent arty s7 25
2021-12-19 17:35:23 +01:00
18349fb6e8
efinix: add support for Titanium Ti60 f225 dev kit
2021-12-13 22:13:29 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
7ceaab0126
spiOverJtag: add bitstream for ECP4CE15F23
2021-11-28 16:51:42 +01:00
7ed432cba2
board: add QMTECH Cyclone IV Core Board
2021-11-14 08:45:11 +01:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
7d8c8b2dcb
Add Trion T120 BGA 576 Dev Kit support.
...
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
e6c01f75ad
board: fix altsetting default for non-DFU boards, use signed type
2021-10-03 18:31:55 +02:00
a38d0b2d36
board: force 0 for altsetting in non-DFU type
2021-10-03 15:23:21 +02:00
144e376d36
board: add support for 1bitsquared iCEBreaker-bitsy
2021-10-03 12:42:35 +02:00
ea613fa97a
dfu/main: add args to select altsetting and add filter to select corresponding interface
2021-10-03 12:39:06 +02:00
11bdebd884
adding reference to Tang Nano 4K kit in doc
2021-09-02 13:54:34 +02:00
b8e2939776
board: add vid/pid for DFU at board level
2021-07-17 08:34:44 +02:00
894cda820f
board: add default frequency option for BITBANG and SPI boards
2021-07-14 08:05:36 +02:00
797785ce93
Allow board configuration table to contain a default clock speed (as some boards are known to work at higher speeds safely). Move Digilent Arty to 10MHz (tested).
2021-07-11 15:20:15 +01:00
6639f0646a
board: pipistrello: add spi flash support
2021-07-11 08:58:40 +02:00
c90a4b7734
altera: spi flash support for cycloneV and qmtech
2021-07-10 08:20:27 +02:00
0c4aedcb23
altera: add spi flash support for de0nano (EP4CE22F17C6)
2021-07-09 07:40:55 +02:00
84bd19b19a
board: cyc1000: add fpga model
2021-07-08 20:53:20 +02:00
8068c84ec8
board: add Fomu support
2021-06-29 13:49:33 +02:00
8f95303daf
move to APACHE-2.0 license
2021-06-26 15:24:07 +02:00
827767b99f
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
2021-06-20 10:26:05 +02:00
dddfcbc973
board: add support for colorlight I5
2021-06-19 17:30:47 +02:00
00289503dd
README: add ZedBoard, de0nanoSoc and de10nano support
2021-06-19 15:33:26 +02:00
eaed746cf2
Add a few more Spartan6 based parts and boards (tested on an old miniSpartan6+).
2021-06-13 17:55:56 +01:00
a160cc6431
board: add terasic de0nanoSoc
2021-05-15 19:32:49 +02:00
a96fbcc99a
board: add digilent zedboard
2021-05-15 19:31:39 +02:00
a4ccdae7df
add basys3 support
2021-04-20 21:28:14 +02:00
7039465353
rework xilinx fpga spiOverJtag to respect model/package
2021-04-19 21:17:08 +02:00
858d9e6273
add support for Alchitry Au
2021-04-16 21:20:30 +02:00
16f85fff63
add support for kintex xc7k325t
2021-03-24 17:25:05 +01:00
630a976884
add support for cycloneIII and Terasic DE0 board
2021-03-20 12:23:17 +01:00
dbc78f8c57
add seeedstudio runber (gowin GW1N-4)
2021-01-28 06:19:43 +01:00
60800ee1a6
board: add entry for tec0117
2021-01-25 18:52:54 +01:00
cd625d4c99
add efinix Xyloni support (spi mode only)
2021-01-21 07:11:10 +01:00
1b065277f9
add acorn CLE 215+ support
2020-12-17 09:28:45 +01:00
6e44797677
add fairwaves xtrx pro board
2020-12-15 09:47:10 +01:00
a11ec92a25
Fix gcc 10.2 error messages.
2020-12-12 15:48:45 -08:00
14c5b8e681
add support for ice40 FPGA and iCEBreaker, icestick, iCE40-HX8K, iCE40-HX1K-EVN boards
2020-10-31 15:02:54 +01:00
7e15b5cabb
board: Fireant support
2020-10-31 10:44:44 +01:00
Shareef Jalloq
Gwenhael Goavec-Merou
Stéphane Chevigny
wonderfullook
Maik Ender
Jiajie Chen
wdevore
Olivier Galibert
Ricardo Barbedo
Marcus Andrade
Icenowy Zheng
Cedric de Wijs
Haakan T. Johansson
Martin Braun
Dvir Cohen
Bastian Löher
Hirosh Dabui
Mike Lewis
Stephan Ruloff
Torsten Reuschel
jonathan kimmitt
Rod Whitby
Hansem Ro
TG
Verneri Hirvonen
Fabien Marteau
Icenowy Zheng
Franck Jullien
Patrick Urban
Florent Kermarrec
ultraembedded
Giuseppe Gebbia
phdussud