Niklas Ekström
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
Gwenhael Goavec-Merou
a90a7b6fa5
main: enable xvc_server
2022-07-06 21:00:24 +02:00
Gwenhael Goavec-Merou
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
Gwenhael Goavec-Merou
e278b87a64
Merge pull request #236 from Icenowy/gw2a
...
Add GW2A support
2022-06-16 07:06:41 +02:00
Icenowy Zheng
3e00756976
part: add GW2A(R)-18(C)
...
Add JTAG ID code for GW2A(R)-18(C), tested with GW2A-18C on Sipeed Tang
Primer 20K.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:54:02 +08:00
Icenowy Zheng
37dbaba6b8
part: add EP4CE115
...
Altera EP4CE115 is a part from Cyclone IV E line.
Add it to the part database.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 08:52:32 +08:00
Dennis Gnad
958ce4d4c3
--flash-sector CFG0 for MachXO3D and more information for its Breakout Board
2022-06-10 13:32:15 +02:00
Mike Lewis
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
Hans Baier
6a2a62cae6
support Kintex XC7K420T
2022-05-10 13:07:47 +07:00
Gwenhael Goavec-Merou
fc07ddf076
doc/FPGAs: add 5CEBA9
2022-04-11 19:16:49 +02:00
Gwenhael Goavec-Merou
bbef5b2e1e
doc/intel: fix svf generation command (issue #212 )
2022-04-11 19:14:18 +02:00
Gwenhael Goavec-Merou
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
Patrick Urban
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
Sylvain Munaut
1c94c1fbca
doc: Update with a couple new supported Xilinx parts
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-29 11:34:39 +02:00
Gwenhael Goavec-Merou
9c51a0610f
doc/FPGA: update/fix ECP5 list
2022-03-28 18:58:30 +02:00
Gwenhael Goavec-Merou
27f0ff2816
Merge pull request #205 from rstephan/spartan3e
...
Spartan3E (xc3s500evq100) and Papilio One
2022-03-28 18:37:43 +02:00
Steven Koo
8b6b09ea25
part: Add kintex7 variant xc7k410t
2022-03-28 10:43:11 -05:00
Stephan Ruloff
b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
Stephan Ruloff
da4689157e
Documentation for the xc3s500e part
2022-03-25 21:33:58 +01:00
Jean THOMAS
9f6d3dd82e
doc/guide: Add instructions for manual installation on macOS
2022-03-22 21:40:06 +01:00
Gwenhael Goavec-Merou
3cef7f920d
board: Xilinx ZCU102
2022-03-19 10:08:51 +01:00
Gwenhael Goavec-Merou
247c044a39
doc/boards: iCE40-HX8K: memory ok
2022-03-17 16:30:23 +01:00
Gwenhael Goavec-Merou
d0647fc951
doc/boards: iCE40UP5K-B-EVN
2022-03-17 16:29:23 +01:00
Gwenhael Goavec-Merou
dc12f8a1b9
doc/cable: RV-Debugger-BL702
2022-03-17 16:19:03 +01:00
Gwenhael Goavec-Merou
3210bcd9cb
Merge pull request #194 from infphyny/qmtech_5cefa5f23
...
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5…
2022-03-13 15:25:01 +01:00
Stéphane Chevigny
2ed5eb5eec
Rename 5cefa5f23 to 5ce523, add documentation for board and fpga
2022-03-13 09:14:52 -04:00
Gwenhael Goavec-Merou
18100ec0f3
cable: new SEGGER J-Link support (PoC)
2022-03-12 18:46:23 +01:00
Gwenhael Goavec-Merou
15fb5ac591
board: PYNQ-Z2
2022-03-12 14:54:24 +01:00
Gwenhael Goavec-Merou
964c7d6659
ftdi MPSSE / jtag: add option to use neg edge for TDO's sampling
2022-03-11 07:45:48 +01:00
Gwenhael Goavec-Merou
73e9a31e51
doc/cable: fix build failure
2022-03-10 20:09:42 +01:00
Gwenhael Goavec-Merou
259914910f
board: Xilinx ZC706
2022-03-10 18:53:41 +01:00
Gwenhael Goavec-Merou
74eb812c6d
cable: digilent jtag-smt2-nc
2022-03-10 18:52:47 +01:00
Gwenhael Goavec-Merou
28ebc98b1b
board: add CERN SPEC150
2022-03-03 15:40:42 +01:00
Gwenhael Goavec-Merou
03769be937
spiOverJtag: Xilinx Spartan6 LX150T
2022-03-03 15:36:11 +01:00
Gwenhael Goavec-Merou
8d1ac49ac2
doc: install: in tree build
2022-03-03 15:33:30 +01:00
RGD2
70b06300f7
Update install.rst
...
Build instructions from source for debian-based distros fixed
- a git clone line was added to clarify when and where source should be
- tested on Debian GNU/Linux 11 (bullseye) / WSL2
2022-02-27 17:51:41 +01:00
Pepijn de Vos
f88ece80cc
Fix debian command
2022-02-27 16:48:04 +01:00
jonathan kimmitt
d4e8eef676
Add board and cable defaults for genesys2
2022-02-21 08:11:57 +00:00
Gwenhael Goavec-Merou
4482deec18
doc/cable: move to yml
2022-02-20 15:47:35 +01:00
Gwenhael Goavec-Merou
7384573992
doc/boards: fix naming format for colorlight-ix boards
2022-02-20 15:11:04 +01:00
Hirosh Dabui
7a7f1723ea
add support for colorlight-i9
2022-02-20 01:41:17 +01:00
Rod Whitby
7022e2101a
Add support for the QMTech Kintex7 Core Board
2022-02-19 14:22:55 +10:30
Rod Whitby
18a24c65ea
Add spiOverJtag support for Xilinx xc7k325tffg676 part.
2022-02-19 13:14:50 +10:30
Hansem Ro
905e96dfec
Add digilent_zybo_z7 10/20 support
2022-02-15 21:01:11 -08:00
TG
94ca103360
doc: add reference to the Terasic DE1-SoC board
2022-02-09 18:40:16 +01:00
TG
89e1fb89d2
doc: add Cyclone V SE SoC FPGA to the supported parts
2022-02-09 18:40:16 +01:00
Verneri Hirvonen
a385719765
doc: tangnano1k doesn't have external flash
2022-01-29 17:50:45 +02:00
Verneri Hirvonen
a133be582d
board: add tangnano1k
2022-01-27 23:10:20 +02:00
Verneri Hirvonen
977900954e
part: add GW1NZ-1
2022-01-27 22:55:21 +02:00
Fabien Marteau
dc5eedfdde
adding constraints AC701
2022-01-27 09:32:59 +01:00