56457a4023
Merge pull request #173 from rstephan/tables
...
Nicer layout for the boards/fpga/cables table
2022-02-09 18:17:35 +01:00
63c9ec01b7
Fixed right alignment problem.
2022-02-09 17:55:16 +01:00
5aa34c6364
board: add Terasic DE1-SoC board
2022-02-09 17:22:38 +01:00
d188314ae3
part: add altera 5CSEMA5 (cyclone V Soc)
2022-02-09 17:21:19 +01:00
a0ef85d516
display: use a less dark blue
2022-02-09 08:33:21 +01:00
687503673e
jtag: for unknown IDCODE display a more complete error
2022-02-09 08:32:41 +01:00
0a43d1b797
part: add map manufacturer id <-> name
2022-02-09 08:32:06 +01:00
12c5e6ba19
Nicer layout for the boards/fpga/cables table
2022-02-08 19:31:37 +01:00
498c01889f
spiFlash: fix overflow test ( #172 )
2022-02-07 07:44:11 +01:00
350570ad2d
board: add tangnano1k to board_list
2022-01-28 13:53:33 +02:00
977900954e
part: add GW1NZ-1
2022-01-27 22:55:21 +02:00
db407a4263
adding xilinx AC701 development kit
2022-01-26 16:42:03 +01:00
f30cca46d8
no dash for zedboard fpga name
2022-01-26 16:29:35 +01:00
0d1905425c
add board zc702 in board.hpp
2022-01-26 16:21:52 +01:00
b4ffe4bf66
xilinx: fix typo
2022-01-24 18:58:32 +01:00
acf677dd46
tangnano9k: new board, with the same cable w/ tangnano4k
...
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2022-01-22 20:51:05 +08:00
dc4a454b94
gowin: add support for GW1NR-9C
...
GW1NR-9C has a different idcode with GW1NR-9.
Add support for it by adding the idcode.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2022-01-22 20:49:35 +08:00
fb2aadadad
cable: adding Olimex ARM-USB-OCD-H
2022-01-20 19:37:50 +01:00
1ab454359f
ftdiJtagMPSSE,ftdipp_mpsse: fix verbose level -> must be an int8_t not uint8_t
2022-01-19 18:42:15 +01:00
5365a9f9cf
ice40: program_cram, add TN ref
2022-01-18 08:37:07 +01:00
eb462d2bec
main: bitstream default target depends on mode spi/jtag
2022-01-18 08:09:54 +01:00
60ba2b1ccc
ice40: add CRAM support
2022-01-18 08:08:48 +01:00
dbc6551a3c
part: add Kintex 160T
...
Signed-off-by: Karol Gugala <kgugala@antmicro.com>
2022-01-14 09:01:23 +01:00
ecc76baa97
board: alinx AXU2CGA
2022-01-13 08:55:26 +01:00
904bf46315
part: adding zynqmp xczu2cg idcode
2022-01-13 08:48:53 +01:00
f44f92ea4b
xilinx: adding zynqmp support and a method to init this family of devices
2022-01-13 08:41:38 +01:00
dddee79f53
jtag: adding method to inject device into active device list
2022-01-13 07:42:14 +01:00
1f59dfd671
jtag: improving jtag chain detection: now searching for masked and unmasked idcode
2022-01-13 07:34:00 +01:00
796483f61f
jtag: fix shiftIR: bypass_after must be computed in all case
2022-01-09 15:38:37 +01:00
ce7f4566c3
board: ulx3s_dfu
2021-12-24 18:10:22 +01:00
2c5a162cc4
dfu: add debug level, only print device open fails in debug mode
2021-12-24 15:48:16 +01:00
17a874fc04
main: fix SPI access
2021-12-24 11:19:30 +01:00
cbae44e1ee
ice40: flash reset powerup are done into spiFlash
2021-12-24 11:13:36 +01:00
39ed7ec7f1
colognechip: suppress warnings
2021-12-24 10:29:21 +01:00
310d21ebf5
dfu: when libusb_open fails: skip device instead of error and stop
2021-12-24 10:26:31 +01:00
35efeb3eee
dfu: check libusb_open return value in searchDFUDevices
2021-12-23 14:08:54 +01:00
f943a8d3f0
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-12-23 10:29:59 +01:00
3244f2e92a
dfu: fix memory leak
2021-12-23 10:29:47 +01:00
4cab198915
colognechip integration: create CologneChip SPI object in dynamic fashion as well
2021-12-23 08:54:48 +01:00
0979194da2
dfu: force USB reset when download end in DFUIdle state
2021-12-23 07:22:06 +01:00
db92ea068c
main: add protection for all devices. Add CLI args
2021-12-22 19:12:33 +01:00
fefea9fe8e
board: generic FTDI SPI
2021-12-22 19:12:02 +01:00
45f7f72030
all devices: add support to (un)protect flash, implement pre/post flash access. Use new spiInterface methods
2021-12-22 19:11:35 +01:00
af14e9b518
ftdispi: pre/post flash access
2021-12-22 19:09:04 +01:00
ffa90fb6fb
ftdipp_mpsse: better verbose level
2021-12-22 19:08:44 +01:00
b25e2e0125
spiFlash: enable/disable protection. now handle correctly device with protection enabled
2021-12-22 19:07:00 +01:00
21b44fc22f
spiInterface.hpp: add constructor, (un)protect flash, and generic pre/post flash access methods
2021-12-22 19:05:21 +01:00
7e91d97828
device.hpp: add (un)protect flash methods
2021-12-22 19:03:57 +01:00
de2917428e
spiInterface: add common method to (un)protect, write and dump SPI flash content
2021-12-22 19:01:58 +01:00
55d5cba9fb
spiFlashdb: add spansion S25FL 064P/128P
2021-12-22 18:59:52 +01:00
50bdbde809
spiFlashdb: add micron N25Q32
2021-12-22 18:58:51 +01:00
5df1d9775d
spiFlashdb: add windbond w25q devices
2021-12-22 18:58:07 +01:00
b18191b0ba
spiFlashdb: fix tb_offset for ISSI devices
2021-12-22 18:57:34 +01:00
496e6678ec
spiFlashdb: introduce conf register for tb
2021-12-22 18:56:53 +01:00
56a1e0310d
board: add arty S7 50
2021-12-21 18:21:39 +01:00
03c7d7faad
arty A7 100t support
2021-12-21 07:02:48 +01:00
f3e9a9fa6d
digilent_arty_z7 10/20 support
2021-12-20 18:10:17 +01:00
ee7570b251
zynq xc7z010 support
2021-12-20 18:09:52 +01:00
e026aa28c7
Digilent arty s7 25
2021-12-19 17:35:23 +01:00
37abf105aa
xilinx: use gz file by default
2021-12-19 17:34:14 +01:00
648f5e8bdb
size_t is actually unsigned
2021-12-18 17:03:52 +03:00
bae403c3a9
efinix/titanium: add missing JTAG idcode
2021-12-14 09:16:08 +01:00
18349fb6e8
efinix: add support for Titanium Ti60 f225 dev kit
2021-12-13 22:13:29 +01:00
1c91928175
Merge branch 'master' into colognechip/gatemate
2021-12-13 10:18:41 +01:00
1e1b93c27a
colognechip integration: introduce waitCfgDone() and check for raw data
2021-12-12 15:34:25 +01:00
e252e713dd
colognechip integration: apply review remarks
...
* add missing #include <string>
* add comment to part.hpp why highest nibble should be kept
* remove _reverseOrder variable from colognechipCfgParser.{hpp,cpp}
* rename cfgDone() to to a more meaningfull waitCfgDone()
2021-12-12 11:55:10 +01:00
dd0d668d96
colognechip integration: update code style
2021-12-11 16:36:29 +01:00
e4971897d7
jtag: ckeck highest nibble to prevent confusion between Cologne Chip GateMate and Efinix Trion T4/T8 devices
2021-12-11 16:35:30 +01:00
bc610383cd
part: add support for Anlogic ELF2 EF2M45
...
Anlogic EF2M45 is a FPGA with a co-packaged 4Mbit SPI Flash, and the
JTAG interface is the same with EG4S20.
Add support for it by adding it to the part database.
SPI Flash programming and SRAM programming are both tested.
The support of EF2M45 is also documented in this commit.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
2021-12-11 02:12:32 +08:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
e182a53659
dfu: don't check filename -> let configBitstreamParser to do check
2021-12-07 14:17:09 +01:00
dfed1d1799
configBitstreamParser: cleanup
2021-12-03 07:21:22 +01:00
9005b2880b
CMakeList/configBitstreamParser: add optional zlib-ng support. No zlibxx is required
2021-12-02 07:20:58 +01:00
7ceaab0126
spiOverJtag: add bitstream for ECP4CE15F23
2021-11-28 16:51:42 +01:00
49b6bc6ce3
device: check if it's a compressed file -> extract real extension
2021-11-26 07:35:03 +01:00
ac09ac9b96
Merge branch 'trabucayre:master' into master
2021-11-25 15:10:14 +00:00
8fc67762f6
merged
2021-11-25 15:09:38 +00:00
c06e920143
updated to set authentication mode
2021-11-25 14:59:37 +00:00
7fe0a5ab66
wip: adding pubkey programming
2021-11-25 14:50:33 +00:00
7e7e030661
wip: adding pubkey programming
2021-11-25 14:13:17 +00:00
7a19f94f19
add zlib support (currently limited to altera spiOverJtag)
2021-11-25 08:11:50 +01:00
70e9671b3a
device: if filename has no extension -> use raw type
2021-11-24 07:35:33 +01:00
533cd64f37
lattice: if unknown file type, fails only for SRAM
2021-11-24 07:35:10 +01:00
98a025d68e
lattice: improve message for idcode mismatch
2021-11-22 07:01:19 +01:00
9f4ed8aaf6
latticeBitParser: fix loop type
2021-11-20 18:36:09 +01:00
2e2e325a9b
lattice: check matching idcode between bitstream and FPGA
2021-11-20 17:01:40 +01:00
ab43af7f0e
latticeBitParser: extract FPGA idcode from configuration data
2021-11-20 17:01:13 +01:00
1637d6f484
lattice: fix REG_STATUS_CNF_CHK_MASK offset: not the same for machXO3D and others
2021-11-20 16:57:31 +01:00
7f6a68ae2c
lattice: cppcheck/lint
2021-11-20 16:07:53 +01:00
5f78204f22
Merge pull request #130 from abacomartin/master
...
adding support for MachXO3D
2021-11-20 15:35:01 +01:00
482141c556
verbose/verify modifications + common code moved to calling func + more white space!
2021-11-19 15:21:52 +00:00
393bf1d28b
Unused variables (plus some more white space fixes)
2021-11-19 15:11:02 +00:00
7ed432cba2
board: add QMTECH Cyclone IV Core Board
2021-11-14 08:45:11 +01:00
48c326130a
part: EP3C16 and EP4CE15 have same idcode
2021-11-14 08:44:39 +01:00
952084cd1d
all jtag interface: don't convert verbosity level to bool
2021-11-11 17:42:51 +01:00
8df01663ff
main: raise error when board name is provided but not found
2021-11-11 17:20:51 +01:00
07752c37e2
fix up line endings and white space issues - also moved the flash sector if block into MachXO3D family - as not required for other types
2021-11-11 09:04:50 +00:00
b6979f54f7
adding support for MachXO3D
2021-11-09 08:54:09 +00:00
3b15a633fa
ch552_jtag: cleanup and fix buffer flush with previous libftdi version
2021-11-06 10:52:53 +01:00
745844f0a0
ftdipp_mpsse: check mpsse_write return value
2021-11-06 10:33:48 +01:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
fb6a3b9f03
all cables: writeTMS len int -> uint32_t
2021-11-06 10:31:00 +01:00
28620f8ce9
altera: check file type: for an unknown type user has to explicitly provides flash mode fails otherwise
2021-11-06 08:37:14 +01:00
b27422cbe9
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-10-23 08:44:28 +02:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
859c1a1a0f
spiFlash: erase using 4 or 64Kb
2021-10-20 08:00:21 +02:00
c043da874c
spiFlash: enable_protection method
2021-10-20 07:43:47 +02:00
3730e8189d
spiFlash: extract status register display from read_status_reg
2021-10-19 07:06:46 +02:00
6714400909
spiFlashdb: introduce tb_register to know tb location register
2021-10-19 06:55:30 +02:00
d8b8afce99
spiFlash: fix len_to_bp mask
2021-10-18 07:34:27 +02:00
7d8c8b2dcb
Add Trion T120 BGA 576 Dev Kit support.
...
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
103de667f7
protection descriptor for IS25LP128
2021-10-14 20:55:42 +02:00
eb545b5256
typo
2021-10-14 20:52:46 +02:00
4b3755f368
cmsisDAP: fix buffer length
2021-10-13 07:16:30 +02:00
b1b1e5a4a8
main: don't limit vid/pid to dfu
2021-10-13 06:51:22 +02:00
de88698b0c
cmsisDAP: close device and context after use/ when fail
2021-10-13 06:46:05 +02:00
2d26b9d485
cmsisDAP: typo
2021-10-12 16:38:03 +02:00
6a4d24cf7a
cmsisDAP: send disconnect after use
2021-10-12 07:52:38 +02:00
dd4e3e40df
spiFlash: typo
2021-10-10 18:27:41 +02:00
ddcf8fd1b1
spiFlash: add flash_model, method to convert len to block protect and block protect to len
2021-10-10 18:26:04 +02:00
22c095547e
spi: introduce list of known spi flash devices (required for protection)
2021-10-10 18:25:09 +02:00
4c2a091ab1
xilinx: introduce coolrunner-II support
2021-10-06 08:46:00 +02:00
69ac10e2f7
Merge branch 'master' of github.com:trabucayre/openFPGALoader
2021-10-03 18:34:07 +02:00
6858cabc7d
main: introduce vid/pid args
2021-10-03 18:33:55 +02:00
2adf4d585e
dfu: throw exception when vid & pid == 0; change altsetting type
2021-10-03 18:33:07 +02:00
e6c01f75ad
board: fix altsetting default for non-DFU boards, use signed type
2021-10-03 18:31:55 +02:00
f6dfee2db0
xilinx: Adapt wait times with JTAG frequency.
...
Allowed frequency is up to 10 MHz according to xc95XXXxl_1532.bsd
2021-10-03 17:37:28 +02:00
c165154317
xilinxMapParser: typo
2021-10-03 16:46:12 +02:00
1233459528
xilinxMapParser: fuse mapping for xc2c jed
2021-10-03 16:25:41 +02:00
a38d0b2d36
board: force 0 for altsetting in non-DFU type
2021-10-03 15:23:21 +02:00
144e376d36
board: add support for 1bitsquared iCEBreaker-bitsy
2021-10-03 12:42:35 +02:00
ea613fa97a
dfu/main: add args to select altsetting and add filter to select corresponding interface
2021-10-03 12:39:06 +02:00
abef1f4968
add verbose-level args: -1 quiet, 0 normal mode, 1 verbose, 2 debug lowlevel
2021-10-03 08:22:35 +02:00
28cbd1faad
spiFlash: workaround for dump > 1M
2021-10-02 19:25:04 +02:00
fe1634897f
part: merge ECP5-12 & ECP5-25 (same idcode)
2021-10-02 15:20:55 +02:00
2e64a52cb5
Merge pull request #118 from UweBonnes/mpsse_toggle
...
ftdiJtagMPSSE: Fix TCK toggle for large numbers.
2021-09-29 06:31:50 +02:00
f9a62b418b
ftdiJtagMPSSE: Fix TCK toggle for large numbers.
2021-09-28 21:06:46 +02:00
8ec009fcea
part.hpp: Fix wrong description of XC95288XL
2021-09-28 12:33:14 +02:00
cee91fa5a1
jedParser: p2
2021-09-25 15:06:47 +02:00
bd903be6b6
jedParser: fix checksum when configuration data size is not multiple of 8bits
2021-09-25 15:06:13 +02:00
36783d74c4
progressBar: Use only stdout.
...
The progress markers of the progress bar were output to stderr while the
rest was output to stdout. Move everything to stdout.
2021-09-20 15:14:23 +02:00
3698b98976
ftdiJtagMPSSE: improve a bit USB transaction
2021-09-18 14:54:40 +02:00
57c0f16be4
ftdipp_mpsse: typo in setClkFreq
2021-09-16 07:41:05 +02:00
85b53b5918
add gowin external spi in bscan and --external-flash option
2021-09-15 20:18:49 +02:00
ae2fcfdca1
main: args. Fix comments for load and write bitstream
2021-09-13 14:10:42 +02:00
b70bd83ced
Merge branch 'trabucayre:master' into master
2021-09-03 08:52:18 +02:00
2ef040774e
fsparser: gw1nsr-4c idcode/nb_line
2021-09-03 07:47:58 +02:00
23cf631b85
fix part name GW1NSR-4 -> GW1NSR-4C
2021-09-02 14:56:22 +02:00
11bdebd884
adding reference to Tang Nano 4K kit in doc
2021-09-02 13:54:34 +02:00
94385a758e
adding IDCODE for GW1NSR, for Tang Nano 4K kit
2021-09-02 13:46:35 +02:00
Gwenhael Goavec-Merou
Stephan Ruloff
TG
Verneri Hirvonen
Fabien Marteau
Icenowy Zheng
Karol Gugala
Patrick Urban
uis
Franck Jullien
abacomartin
Martin Beynon
Florent Kermarrec
emard
Uwe Bonnes
Vegard Storheil Eriksen
Fabien Marteau