fa262035f2
Merge pull request #253 from Chandler-Kluser/master
...
Updated Troubleshooting
2022-09-24 07:30:40 +02:00
3c619a5fd2
Simplified troubleshooting .rst and removed media
2022-09-20 18:23:04 -03:00
27d64e0248
doc/guide/install: add a note about Linux group right
2022-09-17 15:56:51 +02:00
6211aa145e
doc/guide/advanced: fix sphinx warning
2022-09-17 15:56:15 +02:00
6f05c0eae0
Updated Troubleshooting
2022-09-07 19:44:05 -03:00
fe259fb78d
gowin: add MSPI support when GW2A
2022-09-06 21:25:32 +02:00
93aa9f4dd3
cable: add lpc-link2 support
2022-08-29 21:03:30 +02:00
5f7d4d2078
Add Xilinx Kintex UltraScale KCU035 IDCode
2022-08-18 15:25:09 +02:00
f115608cb1
Add Steppenprobe cable
...
https://github.com/diegoherranz/steppenprobe
Config taken from OpenOCD repo:
https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/interface/ftdi/steppenprobe.cfg
2022-08-09 18:31:16 +02:00
df56450e96
doc/guide/install: add a note for libgpiod
2022-07-26 20:32:46 +02:00
b4d343ce05
board: adding sipeed Tang Primer 20k
2022-07-26 20:25:43 +02:00
6c28318057
doc: typo
2022-07-26 08:33:53 +02:00
a7279e1dd5
doc: Gowin: adding a note on howto recover the jtag when JTAGSSEL_N is used as GPIO
2022-07-26 08:18:44 +02:00
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
a90a7b6fa5
main: enable xvc_server
2022-07-06 21:00:24 +02:00
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
e278b87a64
Merge pull request #236 from Icenowy/gw2a
...
Add GW2A support
2022-06-16 07:06:41 +02:00
3e00756976
part: add GW2A(R)-18(C)
...
Add JTAG ID code for GW2A(R)-18(C), tested with GW2A-18C on Sipeed Tang
Primer 20K.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:54:02 +08:00
37dbaba6b8
part: add EP4CE115
...
Altera EP4CE115 is a part from Cyclone IV E line.
Add it to the part database.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 08:52:32 +08:00
958ce4d4c3
--flash-sector CFG0 for MachXO3D and more information for its Breakout Board
2022-06-10 13:32:15 +02:00
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
6a2a62cae6
support Kintex XC7K420T
2022-05-10 13:07:47 +07:00
fc07ddf076
doc/FPGAs: add 5CEBA9
2022-04-11 19:16:49 +02:00
bbef5b2e1e
doc/intel: fix svf generation command (issue #212 )
2022-04-11 19:14:18 +02:00
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
1c94c1fbca
doc: Update with a couple new supported Xilinx parts
...
Signed-off-by: Sylvain Munaut <tnt@246tNt.com>
2022-03-29 11:34:39 +02:00
9c51a0610f
doc/FPGA: update/fix ECP5 list
2022-03-28 18:58:30 +02:00
27f0ff2816
Merge pull request #205 from rstephan/spartan3e
...
Spartan3E (xc3s500evq100) and Papilio One
2022-03-28 18:37:43 +02:00
8b6b09ea25
part: Add kintex7 variant xc7k410t
2022-03-28 10:43:11 -05:00
b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
da4689157e
Documentation for the xc3s500e part
2022-03-25 21:33:58 +01:00
9f6d3dd82e
doc/guide: Add instructions for manual installation on macOS
2022-03-22 21:40:06 +01:00
3cef7f920d
board: Xilinx ZCU102
2022-03-19 10:08:51 +01:00
247c044a39
doc/boards: iCE40-HX8K: memory ok
2022-03-17 16:30:23 +01:00
d0647fc951
doc/boards: iCE40UP5K-B-EVN
2022-03-17 16:29:23 +01:00
dc12f8a1b9
doc/cable: RV-Debugger-BL702
2022-03-17 16:19:03 +01:00
3210bcd9cb
Merge pull request #194 from infphyny/qmtech_5cefa5f23
...
Add qmtechCycloneV_5cefa5f23 board and spiOverJtag/spiOverJtag_5cefa5…
2022-03-13 15:25:01 +01:00
2ed5eb5eec
Rename 5cefa5f23 to 5ce523, add documentation for board and fpga
2022-03-13 09:14:52 -04:00
18100ec0f3
cable: new SEGGER J-Link support (PoC)
2022-03-12 18:46:23 +01:00
15fb5ac591
board: PYNQ-Z2
2022-03-12 14:54:24 +01:00
964c7d6659
ftdi MPSSE / jtag: add option to use neg edge for TDO's sampling
2022-03-11 07:45:48 +01:00
73e9a31e51
doc/cable: fix build failure
2022-03-10 20:09:42 +01:00
259914910f
board: Xilinx ZC706
2022-03-10 18:53:41 +01:00
74eb812c6d
cable: digilent jtag-smt2-nc
2022-03-10 18:52:47 +01:00
28ebc98b1b
board: add CERN SPEC150
2022-03-03 15:40:42 +01:00
03769be937
spiOverJtag: Xilinx Spartan6 LX150T
2022-03-03 15:36:11 +01:00
8d1ac49ac2
doc: install: in tree build
2022-03-03 15:33:30 +01:00
70b06300f7
Update install.rst
...
Build instructions from source for debian-based distros fixed
- a git clone line was added to clarify when and where source should be
- tested on Debian GNU/Linux 11 (bullseye) / WSL2
2022-02-27 17:51:41 +01:00
f88ece80cc
Fix debian command
2022-02-27 16:48:04 +01:00
Gwenhael Goavec-Merou
Chandler Klüser
Maciej Nowak
Diego Herranz
Niklas Ekström
Icenowy Zheng
Dennis Gnad
Mike Lewis
Hans Baier
Patrick Urban
Sylvain Munaut
Steven Koo
Stephan Ruloff
Jean THOMAS
Stéphane Chevigny
RGD2
Pepijn de Vos