Family recognition is added, as well as minor fixes, but base generation
itself is not allowed for GW5 - this gives the ability to test the next
Apicula release and still not break installations for those who simply
specify `HIMBAECHEL_GOWIN_DEVICES = "all"`.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* Add log output
* Optimize CC_LUT1
* Update tests
* Optimize CC_LUT2 as well
* Use init enumerations
* Merge DFF in MX4
* Move repack code
* Move ramio code to pack_cpe
* Merge LUT1/2 to ADDF inputs
* Note actual CPE ports
* Merge DFF in ADDF
* Update FF params and ports first
* Check if DFFs are compatible before merging
* Optimize DFF/Latch
* Add reporting of optimized cells
* Optimize MX2/4
* Add statistics
* Use special nets for VCC/GND to skip using name
* Add warning for carry chain split
* Merge FFs where possible
* Cleanup
* Keep statistics out for now
* Add logs for packing sections
* review fixes
---------
Co-authored-by: Lofty <dan.ravensloft@gmail.com>
Adds automatic connection of a general-purpose pin to the global clock
network.
The old behaviour, where such networks have to be explicitly specified,
can be activated with the command line key
"--vopt disable_gp_clock_routing".
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* CPE mapping improvements
* Use CP_OUT for adders
* Fixes
* Small fixes
* Cleanups
* Cleanup
* Cleanups
* Fixes
* Fixes
* Optimize
* Cleanup
* clangformat
* Cleanup
* Cleanup
* Bump required version of database
* Cleanup
* Resolve name conflicts
* Fix signal routing
* Make CPE_LATCH separate
* Add more timings models, need updated values
* Fixed warning
* multiplier support from lofty/gatemate-mult
* explicitly zero some params in B passthrough
* comment the relevant CPE inputs in check_multipliers
* Rename some of bels
* remove _lower from name
* refactor multiplier checking
* Revert "remove _lower from name"
This reverts commit daa1041bdf.
* Fixe net name to be unique
* Make sure we at least generate bitstream with all info
* Simplify zero
* Bounded cell type in gui
* typo fix
* Remove A passthrough inversion option
* Clean up CarryGenCell config
* Update a passthru to use new primitives
* Cleanup for adders
* Clean up MsbRoutingCell
* Cleanup
* Refactor A connection code
* Make it more as in PR #1513
* Added cplines to bpassthru and fixed constant driver for A
* Add parts
* Added comp out connections
* clangformat
* clangformat
* Clean up B passthrough connections
* wire up a bunch of intermediate signals
* Bit of cleanup
* handing of C_EN_IN
* C_EN_CIN fixes
* connect f_route to its lines
* fix cite for FRoutingCell
* fixup, oops
* connect multfab to its lines
* Commented line
* Connect CPOUTs
* Handle C_I params
* connect CINY1 for CarryGenCell
* fix carry gen CINX
* Update L2T4 model
* Updates for ADDCIN
* clangformat
* fix some issues with multfab and f_route
* look at C_I when doing inversion
* Only set some C_I signals when used
* Fix one more place
* do not use cplines so we can merge in one cell
* Cover cases that could be optimized out
* clangformat
* Cleanups
* Disable multiplier usage for now
---------
Co-authored-by: Lofty <dan.ravensloft@gmail.com>
Use loop enumeration of PIPs instead of direct name construction for the
upper and lower ends of the segment wire.
Also do not allow clock wires for segments.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* SER_CLK support
* Update constids
* wip
* CLK_FEEDBACK
* Handle SER_CLK and SER_CLK_N
* clangformat
* Cleanup
* Use _ as separator for PLL CFGs
* Remove unused clocking cells
* Do not use same name for IO models
* Fix IDDR merge
* Cleanup
* Properly handle user global signals
* Move signal inversion in bitstream creation
* Start adding multi die support
* Display die location for pins used
* Do not use constant s as locations
* Cleanup SB_DRIVE handling
* Use DDR locations from chip database
* Place only in prefered die for now
* Set D2D
* Fixed typos
A segment router replaces the source-to-sink connection by
general-purpose PIPs with bus-branch segment network connections.
The problem arises when the source is connected to the sinks directly
without switching as in the case of LUT->DFF, such wires should be left
as is, which is what this PR does.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
* gatemate: clock router
Co-authored-by: Miodrag Milanovic <mmicko@gmail.com>
* Re-add clock router pip binding
* Refactoring
* Require globals to use a BUFG
* Fix misunderstanding of GPIO/RAM clocking
* Add plane info to chipdb
* Force clock routing along a specific plane
* Remove overly-limiting condition
* Move clock router into its own file
* Clock router based on delay
* Refine clock router conditions
* More detailed clock routing output
* Clean up debug messages
* clangformat
---------
Co-authored-by: Miodrag Milanovic <mmicko@gmail.com>
Fill in the delays for PIP classes related to HCLK and IODELAY. Also:
- if clock routing fails, we try to use the next fastest mechanism - segment networks;
- fixing harmless typos.
Signed-off-by: YRabbit <rabbit@yrabbit.cyou>
Each PLL output in ECP5 can be bypassed, which turns it into a wire
that passes through ICLK unmodified. When an outputs mux is set to
REFCLK, disregard other PLL configuration and copy the input constraint
over unchanged.
YRabbit
Miodrag Milanović
via
myrtle
José Miguel Sánchez García
Lofty
Frans Skarman
William D. Jones
Catherine
Dave Anderson
Benjamins Stürz