Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
This patch schedules the input value change to .sfuns calls to avoid
potential recursion problems. It also cleans up two put_value calls
that did unneeded loops when putting VectorVals and the width was
greaten than 32 bits.
This patch adds a new flag to vvp "-n" that can be used to make
$stop and hence <Control-C> act like $finish. This may be desired
when using vvp in a non-interactive environment.
tgt-vvp/eval_expr.c uninitialized variables
vpi/sys_display.c uninitialized variables
vvp/vpi_priv.cc deprecated string constant usage
vvp/vpi_vthr_vector.cc deprecated string constant usage
the last entry invokes vpip_name_string() and uses const char *
in the same way as the other 9 callers in vvp/*.cc, the only
difference is that the argument is static instead of computed.
Rework the ivl_file_table_* interface to be more generic and easier
to use. Also all the vvp examples except for memory.vvp have been
fixed to run correctly with the current vvp. Someone with a bit more
experience will need to fix memory.vvp.
Add the vpiFile and vpiLineNo properties to system functions.
Most other objects have stubs that return "N/A"/0. Interactive
functions (called from the debugger) use <interactive> for the
file name.
With this change, local symbols are not emitted in the vvp target,
but are marked as local. When thus marked, the vvp run time does not
offfer any VPI access and the signals (net or var) are effectively
invisible.
The recent changes to vpi_get_str had a minor problem that was
causing a core dump when trying to get the vpiFullName of an
arrayed signal. Basically vpi_get_str is not reentrant so the
name must be duplicated. It must also be duplicated to work with
the free in the code (do not free a result_buf).
Gets rid of a few warning: deprecated conversion from string
constant to 'char*', follows IEEE 1364-2001C 27.10 in more cases,
and fixes at least one real bug (look at the previous use of
strdup/strcat in real_var_get_str() and signal_get_str()).
This patch fixes a number of problems associated with the various dumpers.
1. It catches the problem uncovered in pr1809904 and prevents the core
dumps from happening. It prints a warning message if you try to change
the file after the program has started dumping data to the file.
2. It makes all the dumpers work in the same manner. Before the VCD
$dumpfile was processed at compile time, but the LXT/LXT2 versions
did this at run time. The correct place for this is the run time so
that you can pass the task a calculated name.
3. All the dumpers use common compiletf routines located in vcd_priv.c
4. Make the LXT/LXT2 $dumpfile commands only get the file name and
let $dumpvars actually open the file. This matches the VCD code.
5. Fix the $dumpfile code to allow calculated file names.
6. Make dumpvars without a scope/variable match all toplevel modules
not just the toplevel module the $dumpvars was located in. This
now matches the standard (2001).
7. Simplify the no dumper code (vcdoff.c) and add missing functions.
8. Cleanup the code and messages.
9. vvp can take -none for no dumper.
This patch fixes another minor problem introduced by the process
end of simulation events. Specifically if the compilation has
indicated we should not run do not even start the main event loop.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
When loading a part select from the least significant bits, it is
OK to use the %load/v instruction to strip the high bits off. This
allows the zero-based part select to work in one step, without
loading excess bits.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Use the new array VPI functionality (vpiIndex, vpiParent, vpiArray)
to dynamically generate array word names. The old patch to implement
was mostly reverted.
Add the array related VPI calls. These will be used to generate
the array word name only as needed to conserve space. This patch
also makes scanmem3 from the vpi test work correctly after a
slight gold file update.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
The functor counters were left over from the v0.8 release. Rework
the counters to be relevent to the current state of vvp.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds the ability to dump array words. The words are only
dumped if they appear in a $dumpvars() statement (they are not dumped
by default). The name used for the word is <array_name>[<index>], so
you can get unexpected name conflicts.
There is also a slight increase in the memory requirements since each
array word now keeps its own name information. In the future we would
like to change this, but that is a much larger rewrite of the array
code in vvp.
This patch also needs the "Prefix escaped identifier ..." patch to
work correctly (the array word name is an escaped identifier).
Implement extended vvp command line options to control the amount
of detail that the sdf annotator emits while parsing the source
file.
Signed-off-by: Stephen Williams <steve@icarus.com>
Pass parsed SDF delays into the vvp run time as vpiScaledRealTime
variables, and handling the mapping of 2-values to 12-delays.
Signed-off-by: Stephen Williams <steve@icarus.com>
This was causing a core dump for a number of the vpi test cases.
The problem was that they did not need the simulation time, so it
was being set to NULL. The problem was the EndOfSimulation callback
was always setting cb_data.time to the current time. A big problem
when the pointer was NULL. The solution is to only set the time
when the pointer is not NULL
String values are known to be 2-value bits, so they are natural
candidates for using the movi instruction to load the value in
far fewer instructions. With this patch, up to 16bits (two bytes)
at a time can be loaded per instruction.
Signed-off-by: Stephen Williams <steve@icarus.com>
A previous patch I submitted to try and keep the $finish time
events missed the case of an infinite loop that did not advance
the micro time step which then prevents the debugger from
generating a finish (you can interrupt an infinite loop, but you
could not finish out of it). This patch adds a check for a
finish after each debugger call to fix this problem.
When nets are forced by non-constant expressions, the value is linked
to the destination net through a force_link. This patch adds the code
needed to unlink a force/link so that release and new force/links can
work. This fixes pr1735836.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds marks at simulation end if needed and enabled (on
and not over the limit) for vcd/lxt/lxt2 files. End of simulation
callbacks also now have the correct simulation time. The default
file names for lxt and lxt2 now match the vcd file except for the
extension. lx2 is also an alias for lxt2 and the default lxt2 file
extension is lx2. This matches what GTKWave expects. Any lxt2
diagnostic output print LXT2 instead of LXT to make it clear which
dumper you are using.
This patch fixes/enhances the array part select code. It also
verifies that any lval array index in a continuous assignment
is a constant value. Also, %set/av now uses index register 1 as
described in the documentation (as a bit offset).
Add/rework VPI access to modpaths. This allows VPI code access to
paths described in specify blocks. In the process, the VPI structure
has been reworked to conform to the IEEE1364 standard.
Signed-off-by: Stephen Williams <steve@icarus.com>
Cleanup klunky implementation of vpi_get/put_delays for modpath
objects. Remove some useless members.
Signed-off-by: Stephen Williams <steve@icarus.com>
Wide division/modulus (more bits than unsigned long) gave incorrect
results when both the divisor and dividend where the same. They also
did not produce an error message when dividing by zero.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.
Signed-off-by: Stephen Williams <steve@icarus.com>
signed compare in proceedural code was comparing the absolute
value if both operands were negative. Wrong!
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds ivl_scope_time_precision() to the compiler which can
be used to extract the local scope precision. tgt-stub and tgt-vvp
have been modified to use this new function and output a value that
is appropriate. The vvp runtime has been altered to use this new
data which is accessed with the vpip_time_precision_from_handle()
function. vpiTimePrecision uses this function to return the correct
precision.
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.
- GSoC 2007
This patch splits the end of compile and the start of simulation call
backs code into two different procedures. The end of compile events are
still executed at the same time they alway were. The start of simulation
events are now run after initialization.
The event loop used to check for $finish at every iteration. This patch
alters this behavior to only check just before you advance to the next
time step. This allows events for the current time step to complete.
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
It is possible for the compiler to generate logic gates that have
inputs from part select nodes. This implements the part select
input methods.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch makes vpiFullName for real variables return the correct
value. A Scope reference was added to the base structure along with
the relevant code to support generating the full name. A couple of
memory leaks were plugged and some formatting fixed as well.
It appears that other simulators allow the second argument to
vpi_handle_by_name to be either a scope or a module. Allowing
a module in addition to a scope significantly increases the
usability of this function.
vpi_get_str() can now return a reasonable value for most of the
types used in vvp. I'm not certain I got all of them, but they
are easy to add if any are missing. I also fixed a couple of
typos that I found while looking for all the different types.
This patch adds the missing vpiFullName property to binary and
string parameters (FYI real parameters are not currently supported
by the VPI interface).
This patch implements the swrite* and sformat system tasks. It also
makes $simtime distinguishable from the other integer time tasks.
This was needed to get the correct time units when $simtime was given
as an argument to $swrite*. The string constant code was also modified
to allow a string to be returned as a vector (0/1 bit pattern).
Here are some more specifics about the swrite* changes.
1. They do not share formatting code with the other display functions,
so they may/will produce different results.
2. All %{alpha} codes allow a width and justification. Others have been
enhanced (%t allows the default width and precision to be overridden,
time functions print with time formatting, better error checking and
messages, etc.).
3. %u and %z formatting codes have been added. It is important to note
that these two formats can produce embedded NULLs, since these
functions are returning a string anything after the first NULL will
not be reachable! memcpy is used instead of regular string processing
where needed so that the original string will contain the total
result. The size returned when the string is created is the true
length. A warning will be printed if a string with embedded NULLs is
produced (strlen() does not match the true length).
4. Real numbers are printed with %g instead of %f.
Once this new formatting code has been evaluated we should incorporate
the changes/fixes into the formatting code for the other functions or
the other functions could be modified to use this new code. The true
string length is available so we should be able to work around the
embedded NULL problem.
The calculated return value for the calculated strength value of
a net was left dangling. This patch fixes that. See pr1770199 in
the regression test suite.
Signed-off-by: Stephen Williams <steve@icarus.com>
The standard states that the seed for the random functions should be
an integer/time variable or a register. This patch fixes the compiletf
routines to check for this. There is also a small patch to
vvp/vpi_signal.cc that removes an assert that was failing and replaces
it with appropriate code. The assert was verifying that the source was
not bigger than an integer. The problem with this is that a time
variable or register may be bigger than an integer. I altered the code
to remove the assert and copy only the lower (8 * sizeof integer) bits.
The potential overflow/loss of precision is not checked. This passes
the regression tests.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <steve@icarus.com>
This patch adds a compiletf routine to the $deposit system task and
simplifies the calltf routine. It also patches the constant string code
to return an appropriate integer value when needed. A number of compiletf
routines that check for this can now be simplified since this (string
constants) no longer causes an assert in an integer environment.
In rare cases, the reduction logic nodes may get vector part inputs.
This patch adds support for vector parts entering a reduction node.
Signed-off-by: Stephen Williams <steve@icarus.com>
The port input count assertion was triggering incorrectly. It was
comparing the count with the bytes instead of bits in a word.
Signed-off-by: Stephen Williams <steve@icarus.com>
The argument passed to $finish and $stop is not currently used, but it
is now passed down to the functions that may someday do something
useful with it (schedule_finish() and schedule_stop() in vvp/schedule.cc).
Be careful to include bitwise differences in double values, because
it is the bit pattern we are passing aroung, not the arithmetic value.
Signed-off-by: Stephen Williams <steve@icarus.com>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <steve@icarus.com>
Make varable drivers (reg vectors and real) propagate their initial
values using a special init scheduler queue. This causes the net to
be loaded with reasonable initial values.
Signed-off-by: Stephen Williams <steve@icarus.com>
Words of net arrays were incorrectly added to the scope. They should
only be attached to the array, and accessed as a word of the array.
Signed-off-by: Stephen Williams <steve@icarus.com>
Real value are vector width of 1, fix real literal to reflect this.
fix leaking real registers in code generation for function arguments.
Load of signal should handle conversion from real to vector. Function
arguments, type vector passed a real value, are an example where this
comes up.
Signed-off-by: Stephen Williams <steve@icarus.com>
Backslash-escapes are processed early, during elaboration, so that
escaped characters show up in all places with the calculated value.
This means the $display formatting will get processed strings and
should not process back-slashes again.
Signed-off-by: Stephen Williams <steve@icarus.com>
Arrays of nets that have all their words collapsed together can become
a collapsed array as a whole. Add support for this case in the vvp code
generator and runtime.
more general concept of arrays. The NetMemory and NetEMemory
classes are removed from the ivl core program, and the IVL_LPM_RAM
lpm type is removed from the ivl_target API.
Stephen Williams
Cary R
Larry Doolittle
yang yun ju
Martin Whitaker
steve