This patch fixes a problem in the .part/v select when the index is
undefined. The default value needs to be INT_MIN, so when the long
is cast to an int the value is in range.
To get better functionality in V0.9 and development until we
add a select that is sign aware to .part/v this patch uses
a 32 bit integer (int) for the select value. This allows a
normal Verilog integer to produce the correct results. A
warning for smaller signed index vectors is planned, but it
needs more input.
The first input through a net needs to be propagated, since this
is used as an initialization for the net. This patch also cleans
up wires to not need the width_ member, instead inferring the
width from the saved bit value.
Whether and what to propagate after a release of a part needs to
match the behavior of the full-vector release. Nets need to restore
their driver, and regs need to hold their forced value.
filters need to be able to cope with parts of vectors moving through
the net. It makes the most sense to handle every filter as a part-
selected filter.
&PV<> was just using vpi_get_value() when a signal was driving
the select. This incorrectly returned 0 for 'bx or 'bz. This
patch adds a check for an undefined value and returns INT_MIN
for this case.
Now that .net nodes are references to filters into vvp_net_t objects
and are no longer functors on their own, the .alias node becomes
exactly the same as a .net itself.
When releasing a net, the release needs to propagate the driven
value. When releasing a variable, the driven value must be set
to the previously forced value.
These opcodes need to return 'bx or 0.0 for the real opcode when
the array index is undefined.
The patch also documents the auto incrementing of the bit
index register done by the %load/avx.p opcode.
When a part select is driving another part select any bits outside the
original select must be 'bz instead of 'bx. If we initialize the temporary
buffer to 'bz this should work as required. It there are multiple drivers
then a resolver comes into play and this should not matter.
The %shiftr/i0 and %shiftl/i0 opcodes are used for some part
selects and if we have a negative shift we want the value to be
padded with 'bx. This patch enhances the two %shift/i0 opcodes
to work with negative shifts and for negative shifts pad with
'bx instead of 'b0.
It also fixes %ix/get/s to use a uint64_t instead of a unsigned
long to avoid problems with sign extension on 32 bit machines.
Handle the case where the input to a net is a constant. Since nets
do not exist anymore as nodes in their own right, we need to create
a driver to drive a net from a constant.
Handle forward references of net inputs.
pr2827132 changed the val_ field in vvp_fun_part_sa to only store
the bit values for the selected part, not the entire source vector,
but omitted to modify the recv_vec4_pv method to handle this change.
This patch rectifies that omission.
Two small fixes: Threads should load signal values from signal_value
objects, not signal functors, and the force method should not run
its value through the filter.
It's not too likely we will ever reach this, but we should be nice
and print a message instead of just failing. We could set errno,
but for now the warning will have to be enough.
Currently, edge event functors declared in automatically allocated
scopes that are used to detect edges on signals declared in static
scopes are unable to correctly determine edge information for the
first signal delta they receive because they do not know the old
state of the signal. This patch causes the state of static signals
received by these event functors to be recorded as static state in
the functors, so the old state of the signals can be initialised
to the correct value when a new automatic context is created.
Currently a part select functor will send updates to nodes connected
to its output whenever any part of its input vector changes. This
patch ensures updates are only sent when the selected part of the
input vector changes.
Take wires out of the signals/variables and move them into a filter
instead. This is a big shift, and finally starts us on the path to
divide wires out of signals.
We want the entire force/release subsystem to only reference the
vvp_net_t or vvp_net_fil_t objects in a net. This gives us the
latitude to take wire implementations out of the vvp_net_fun classes.
These methods are type specific, but the code that invokes them
get at them from pointers to filter objects, so it makes sense to
make them abstract methods of the vvp_net_fil_t class.
This patch fixes a number of bugs related to real variable and net
arrays. Specifically the following:
1. When iterating over (scanning) a net array start at base index 0
not index 1.
2. Don't fail when iterating over (scanning) a real variable array.
3. Run the array_word_change() routine when a real variable array
word is changed. This allows array ports and value change
callbacks to work correctly.
4. Update the array_word_change() routine to work with real variable
arrays.
5. Update the array port code to support real variable arrays.
6. find_name() needs to also iterate over net array words just like
memory array words.
7. Initialize all real array words to 0.0 when the array is created.
Added support for the -N option, which causes $stop and ^C to behave
like $finish with an exit code of 1.
While I was at it, I noticed that the summary line in the man page for
vvp was missing a couple of options, so I fixed that.
The fd table used to be statically allocated with only 32 entries.
Three of these were preallocated for stdin, stdout and stderr
leaving only 29 for the user. This patch makes the allocation of
this table dynamic with a hard limit at 1024 total fds. The table
is increased in 32 bit chunks.
Someone got a bit too creative in reducing the original equations
I wrote to handle this. This patch reverts the previous code and
uses my original equations. This passes for both wide and narrow
vectors. The equations are slightly more complicated, but the old
z2x conversion had some overhead. I would expect the time to be
about the same, but you now get the correct results.
The vvp_fun_force node converts its input to a call to the
force method of the target node. This eliminates the need for
linking a net to a force input of a signal.
The vvp_net_t port 2 was used to implement force behavior, but that
is no longer how we plan to implement force, so remove it from the
implementation of signal nodes. This currently breaks much of the
force/release functionality, but we'll get it back by other means.
This patch adds real functionality for `celldefine and pushes this
property to the run time which can access this with vpiCellInstance.
This is technically only available for a module, but all scopes
have the property and only modules should return true when the
'endmodule' is between a `celldefine and `endcelldefine directive.
It looks pretty stupid and non-c++-y, but it does remove two compiler warnings
vvp/stop.cc: In function 'void stop_handler(int)':
vvp/stop.cc:492: warning: deprecated conversion from string constant to 'char*'
vvp/stop.cc:493: warning: deprecated conversion from string constant to 'char*'
The wire base class cannot carry all the overhead for handling all
the different net types, so split it out into derived classes. This
will also move me closer to splitting wires away from variables.
This patch modifies the real parameter get_value routine to use
the standard vpip_real_get_value() routine. This routine has
support for an integer and a decimal string value.
This patch fixes the three %assign/v0/x1 operators to correctly
notice that the select has fallen off the start of the vector
for the case that the negative offset equaled the width.
There is no use implementing the release and deassign methods as
port commands. It's confusing and a waste of vvp_net_t functionality.
It also obscures what needs to be done to more force/release into
the filter object.
This is moving towards moving force/release out of the signal
class. The end-game is to remove all of the wire implementation
out of the functor and into the filter. Variables will remain in
the functor.
Move the vvp_vpi_callback to the vvp_net_sig.h header file, and
collapse some useless hierarchy. (Specifically, all callbackable
items are also wordable.)
Move the run_vpi_callback invocation for wires/variables from the
output generator to the newly implemented filter object. This is
starting to get the filter class working.
This patch adds code to automatically dump the output stream
including any dump file when entering interactive mode. When
the user typed ^C or $stop was executed.
Dumping array words is an enhancement that we have added to Icarus.
The problem was that if you wanted to dump the whole array you would
like to use a for loop as follows:
for (lp = 0; lp < max ; lp = lp + 1) $dumpvars(0, array[lp]);
This used to work, but some of the VPI rework broke it because it
counted on the word select to be constant. This patch restores the
functionality by converting the variable word select into a constant
word select in the calltf routine. This is done without warning and
only for the $dumpvars() routine.
Adding this functionality necessitated adding support for vpiIndex
to the &A<> routines.
This patch adds interactive support for $stop and $finish.
$stop displays a message that the simulator is already stopped.
$finish acts exactly like (calls) the interactive "finish"
command. Having $stop do nothing and $finish not finish until
you exit interactive mode is not very intuitive.
the vvp_net.h header file is getting pretty huge. This divides
the obviously separable signal functor code out into its own
header and source files.
Also, fill out the use of the filter member of the vvp_net_t
object. Test the output of the vvp_net_t against the filter.
When adding history (add_history) use both the existence of the
library and the header file to determine if history can be
supported. Add a new USE_HISTORY that is the and of these two.
The out pointer of a vvp_net_t object is going to be a bit more
sophisticated when we redo the handling of net signals. Take a step
towards this rework by making the pointer private and implementing
methods needed to access it.
To get the correct print format for a 64 bit value it is much
better to use <inttypes.h> (when available) than building our
own value. This allows MinGW to use the non-standard I64.
(cherry picked from commit d237e35076)
The Multiword division was not handling some degenerate high
guesses for the intermediate division result guess. The end result
was an assertion. Recover from this case.
(Does the addinb back of bp need to be optimized better?)
This patch adds compiletf routines for the $sscanf/$fscanf
functions. It does not enhance the conversion routines it
only adds better error/warning messages.
It also removed the redundant IS_MCD in some of the fileio
calltf routines. This is already checked in vpi_get_file().
I also added the vpiNetArray type to allow us to distinguish
arrays of nets from other arrays (memories). Much more is
needed here, but this solved the problem of the day. The
problem was that we needed to make sure we could assign to
the word of a variable array, but not the word of a net array.
It's actually probably not needed since Icarus converts the
net array word reference to just the net, but I thought it
prudent to make sure things didn't slip by.
This is mostly a minor definition change in the parsing of literal
numbers by the vvp lexor. Allow for 64bit numbers in the .delay
records, and have the code generator also able to cope with the
situation.
Previously Icarus normalized the results so array [7:0] would
be the same as array [0:7]. This works just fine for
simulation, but the VPI calls can select the left or right
value and this was incorrect for the [7:0] case since it was
being normalized to [0:7]. This patch swaps the two values in
the a.out file and from this creates the previous first/last
values and a new flag that can be used to get the correct
left and right values for the VPI interface.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
Two bugs:
(1) propagating values through the branch accidentally also
did a part select.
(2) Not all nodes of the branch nexus didn't receive a calculated
values, even though they were all marked as done.
In the process, I cleaned up the code a bit, and documented it for
better understanding.
The code was using vpi_free_object() to free a vpiCallback
object and that was creating a memory leak since this is a
do nothing routine. You need to explicitly use delete.
The newer mkinstalldirs can handle paths that have spaces in them.
While I'm at it, I also updated the Makefiles so that installation
can also work to DESTDIR directories that have spaces.
When cleaning up the &A<> and &PV<> we need to check if the handle
argument is a nested call to another &A<> or &PV<> if it is then
we need to also delete that construct.
We also need to cleanup the vcd_info information list.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
If an &A() operator contains a label for an array that has not
yet been declared, vvp fails with an assertion error. This
patch delays the calls to array_find() in the functions that
compile &A() operators, using the usual resolve list mechanism.
Most named objects should have a vpiModule handle to get a handle
to the enclosing module. This patch adds code to get this for all
the elements that I could find that needed it.
It also adds a three more names to vpi_get_str(vpiType, ...) and
fixes a problem in the vpiLeftRange for PV signals.
This completes the transition to the new string based formatting.
All the tasks now use the string formatting routines. Better
compile time checking and better messages were also added.
Also a couple of types were added to vpi_get_str(vpiType, ...)
and the calculation for vpiConstantSelect was fixed for both
the &A<> and &PV<> constructs. If the value is a plain variable
or if it is calculated in thread space we assume it is not a
constant. This may not be true because of limitations/bugs in
the compiler (constant user functions are one known problem).
Certain paths through vpi_put_value cause a vpip_put_value_event to
be created with no path for deleting in. Add the capability in the
schedule_generic method, so that it can be delete as soon as it is
executed.
This patch fixes vvp to use the standard static result buffer
when returning the vector value of a constant string. The
previous calloc method was creating a memory leak.
This patch fixes some more memory leaks in vvp. Mostly related
to UDP compilation and one in find_scope() that was found when
testing the VPI code. The leak in ivlpp was that the define
temporary buffer not being freed when the lexor was finished.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
Rather then spread VERSION= defines throughout all the makefiles, put
the base version in version_base.in. Use that to generate a version.h
that includes the base version as well as the detailed version.
This reverts commit 31d67fcd3e.
The concensus has been that this causes too many build problems in
the general case and what is needed instead is a way to turn on the
extra warnings for developers only.
Functions that appear in continuous assignment expressions and that
have hidden dependencies or side effects need to be re-evaluated
whenever any input to the expression changes. This patch adds support
in the compiler and vvp runtime to enable this. This is currently
activated for any system function call that has no arguments. The
user may also force it to be used for any user function by passing
the option -gstrict-ca-eval to the compiler driver.
This patch also removes the -dautomatic option which was used for
gaining confidence in the code that supports automatic tasks and
functions. It is believed that the testsuite provides reasonable
fault coverage, and further tests can be added if bugs are found.
The code base is almost shadow-free now, so this won't add much noise to the compiles.
Problems I know about:
lxt{,2}_write.c: patch sent upstream
cflexor.c: exposes gray area of name space boundary
Finish cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. No regressions in the test suite.
This is the end of the simple, coordination-free patches.
The remaining shadows are special cases that will need extra attention.
This patch cleans up the Makefile.in files.
We only need to delete config.log in the lower directories.
We reference the *.in files at $(srcdir)/
We need to make distclean for the tgt-(fpga,pal,verilog) directories.
This is to cleanup the Makefile.
Add some missing "rm -r f dep"
Collapse all the configure checks to a single configure script in
the root of the source tree. This makes the configure process run
a lot faster, expecially on Windows systems that are slower in general.
Remove the #ident and $Log$ strings from all the header files and
almost all of the C/C++ source files. I think it is better to get
this done all at once, then to wait for each of the files to be
touched and edited in unrelated patches.
Tran islands are a kinds of island, so seperate the tran handling
from the core island concept. This will allow for creating new
kinds of islands. (Think analog.)
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
This patch removes the CVS ident information from the Makefile.in
files it also puts in the current version 0.9.devel for the default
VERSION definition. This is normally passed down, but a local make
will use the value from the local Makefile. This will eventually be
replaced with a file based version to give us just one place to
reliably modify the version.
This patch makes the code generator put the compiler version
information in the vvp output file. It also adds checks in vvp
to verify that this version is compatible with the run time.
I am assuming that a base release 0.9.0, etc. will have a
blank VERSION_TAG. Any change relative to the release will have
a VERSION_TAG.
This patch adds a -V flag to the runtime to print version information.
It also updates the manual page to document this and makes some minor
changes to the iverilog an iverilog-vpi manual pages.
Users expect that vpi_put_value() will keep a copy of the string
that is passed to it. This patch implements this buy copying the
string and then freeing it after the actual put_value call.
This configure option causes the installed commands to have
a suffix string that makes them distinct from other versions
that also have a suffix string. This allows for multiple
installed versions of Icarus Verilog.
Also, move installed C/C++ header files into a subdirectory of
their own under the target include directory, to make clearer
the purpose and source of those files.
Eliminate three "warning: suggest parentheses around assignment used as truth value"
Obviously not needed, but it's easier to add the superfluous parentheses
than remember that these warnings are benign.
The VVP %join function was incorrectly treating the return from a
non-automatic function as a return from an automatic function in
the case that the non-automatic function result was being used as
a parameter to an automatic function. This patch fixes this error.
This patch addresses a number of issues:
Rewrote the $test$plusargs and $value$plusargs routines to have
better error/warning messages, to support runtime strings, to
correctly load bit based values (truncating, padding, negative
value), added support for the real formats using strtod() and
added "x/X" as an alias for "h/H" to match the other part of
Icarus.
Rewrite the vpip_{bin,oct,hex}_str_to_vec4 routines to ignore
embedded "_" characters. Add support for a negative value and
set the entire value to 'bx if an invalid digit is found. A
warning is printed for this case.
Rewrite vpip_dec_str_to_vec4 to ignore embedded "_" characters,
to support a single "x" or "z" constant and to return 'bx if an
invalid digit is found. A warning is printed for this case.
It simplifies the system task/functions error/warning messages.
It removes the signed flag for the bin and dec string conversions.
This was not being used (was always false) and the new negative
value support makes this obsolete.
Add support for a real variable to handle Bin, Oct, Dec and Hex
strings. They are converted into a vvp_vector4_t which is then
converted to a real value.
Add support for setting a bit based value using a real value.
Removed an unneeded rfp signal in vpip_make_reg()
This patch adds a number of compile and run-time checks for illegal
uses of variables declared in automatic tasks and functions. It
also adds a check for event expressions in automatic tasks that use
features not yet supported in VVP.
This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
This patch fixes some problems found when trying to dump words
from a real wire array. There are still a few more things that
look suspicious and need testing.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
If a part select (either a constant or constant indexed part select)
of a L-value is fully outside the signal the part select will be
omitted after printing a warning. If a part select straddles the
upper portion of a signal a warning will be printed. The run time
will use only the appropriate part of the select. Straddling the
lower part of the signal is not currently supported and a message
is printed for this case.
It is up to the elaborator to sign-extend the inputs if the multiply
is signed in the Verilog source. The run time always processes the
multiply as unsigned.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
MinGW uses the GetProcAddress() function to find the address of
the vlog_startup_routines() procedure in a .vpi file. This routine
requires that the leading underscore be omitted from the name even
though the underlying routine really has one.
alloc_instance for real values was just passing a new double
to be added to the context items. The new constructor does
not set the default value so we need to do that manually.
This patch adds non-blocking event control for array words.
It also fixes a problem where the word used to put the
calculated delay for a non-blocking array assignment was
not being released. It also fixes the non-blocking array
assignments to correctly handle off the end/beginning part
selects.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
The previous patch (commit 8b0ca902a6)
dealing with the possibilities of (unsigned long) and (vvp_time64_t)
being either the same or different managed to redefine UL_AND_TIME64_DIFF
in the 64-bit case. This does, of course, trigger a compiler warning.
That warning is repeated on every .cc file with a #include "config.h",
which is to say, just about every file.
This patch inverts the sense of the preprocessor conditional, calling
it UL_AND_TIME64_SAME. No more warnings!
A variable that is used to set the delay of a .delay statement
must be scaled to match the local units and for real values
rounded using the precision. This value is then converted to
the simulation precision.
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
The right shift of vvp_vector2_t needs to
account for and mask off shifted bits. Otherwise
there will be unexpected results after
a vvp_vector2_t::trim method.
Assume that anything that is strength aware already handles a
recv_vec8_pv and make the default function convert the bits
to a vec4 and then call recv_vec4_pv with this new value.
Stephen Williams
Cary R
Martin Whitaker
Patrick Doyle
Larry Doolittle
Martin Whitaker