The vvp_vector4_t often receives the results of vector arithmetic.
Add an optimized method for setting that data into the vector. Take
into account that arithmetic results have no X/Z bits, etc.
Remove dependencies on vvp_bit4_encoding outside of the vvp_net
core types. The table_functor_s class was the worst offfender and
was barely used, so it is now removed completely. There are a few
opcodes in vhtread.cc that also make vvvp_bit4_t encoding
assumptions (and used casts) and those have been fixed. There
were also various VPI interface functions that are fixed.
This patch fixes deassign to allow it to unlink from a driver.
It also zeros the cassign_link and force_link pointers after
they have been unlinked. Not doing this will cause an assert
if deassign/release are called multiple times (variable only).
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
Threads used to be deleted when they finished processing code.
The problem with this is that some of the code could be
rescheduled to run at rosync ($strobe, etc.). This allowed the
thread data the code depended on to be reaped too soon. This
patch uses a new queue to schedule thread deletion. The queue
is processed after rosync has finished.
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
draw_number_bool64() in tgt-vvp/eval_bool.c was using %ix/load to
load immediate values into registers greater than three. The problem
was that of_IX_LOAD() in vvp/vthread.cc was masking off the upper
bits. This was putting the results in the wrong register. This patch
removes the bit masking from of_IX_LOAD() and updates the %ix/load
documentation.
This patch fixes two problems. The first is that thr_check_addr()
was being used inconsistently. It should be passed a real address,
but the resize of the vector should be at least one more than this
address. The extra and unneeded CPU_WORD_BITS was also removed
from the routine.
The second problem involved an invalid memory access in
vvp_vector4_t::set_vec() when the vector being copied was an integer
multiple of the machine word width. Under this condition there would
be no remaining bits that needed to be copied but the routine was always
trying to copying some remaining bits. This code is now only executed
when there is a remainder.
Neither of these appear to be causing runtime problems. The second one
was found with valgrind. The first were found while tracking down the
second problem.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
When nets are forced by non-constant expressions, the value is linked
to the destination net through a force_link. This patch adds the code
needed to unlink a force/link so that release and new force/links can
work. This fixes pr1735836.
Signed-off-by: Stephen Williams <steve@icarus.com>
signed compare in proceedural code was comparing the absolute
value if both operands were negative. Wrong!
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <steve@icarus.com>
Real value are vector width of 1, fix real literal to reflect this.
fix leaking real registers in code generation for function arguments.
Load of signal should handle conversion from real to vector. Function
arguments, type vector passed a real value, are an example where this
comes up.
Signed-off-by: Stephen Williams <steve@icarus.com>
more general concept of arrays. The NetMemory and NetEMemory
classes are removed from the ivl core program, and the IVL_LPM_RAM
lpm type is removed from the ivl_target API.
Stephen Williams
Cary R
Larry Doolittle
steve