OpenRAM/compiler/options.py

# See LICENSE for licensing information.
#
# Copyright (c) 2016-2019 Regents of the University of California and The Board
# of Regents for the Oklahoma Agricultural and Mechanical College
# (acting for and on behalf of Oklahoma State University)
# All rights reserved.
#
import optparse
import getpass
import os

class options(optparse.Values):
    """
    Class for holding all of the OpenRAM options. All
    of these options can be over-riden in a configuration file
    that is the sole required command-line positional argument for openram.py.
    """

    ###################
    # Configuration options
    ###################
    # This is the technology directory.
    openram_tech = ""
    
    # This is the name of the technology.
    tech_name = ""
    
    # Port configuration (1-2 ports allowed)
    num_rw_ports = 1
    num_r_ports = 0
    num_w_ports = 0

    # Write mask size, default will be overwritten with word_size if not user specified
    write_size = None
    
    # These will get initialized by the user or the tech file
    nominal_corner_only = False
    supply_voltages = ""
    temperatures = ""
    process_corners = ""

    # Size parameters must be specified by user in config file.
    # num_words = 0
    # word_size = 0
    # You can manually specify banks, but it is better to auto-detect it.
    num_banks = 1
    num_spare_rows = 0
    # num_spare_cols = 0

    ###################
    # Optimization options
    ###################
    # Approximate percentage of delay compared to bitlines
    rbl_delay_percentage = 0.5
    
    # Allow manual adjustment of the delay chain over automatic
    use_tech_delay_chain_size = False
    delay_chain_stages = 9
    delay_chain_fanout_per_stage = 4
    
    

    ###################
    # Debug options.
    ###################    
    # This is the temp directory where all intermediate results are stored.
    try:
        # If user defined the temporary location in their environment, use it
        openram_temp = os.path.abspath(os.environ.get("OPENRAM_TMP"))
    except:
        # Else use a unique temporary directory
        openram_temp = "/tmp/openram_{0}_{1}_temp/".format(getpass.getuser(),
                                                           os.getpid())
    # This is the verbosity level to control debug information. 0 is none, 1
    # is minimal, etc.
    debug_level = 0

    ###################
    # Run-time vs accuracy options.
    # Default, sacrifice accuracy/completeness for speed.
    # Must turn on options for verification, final routing, etc.
    ###################
    # When enabled, layout is not generated (and no DRC or LVS are performed)
    netlist_only = False
    # Whether we should do the final power routing
    route_supplies = False
    # This determines whether LVS and DRC is checked at all.
    check_lvsdrc = False
    # This determines whether LVS and DRC is checked for every submodule.
    inline_lvsdrc = False
    # Remove noncritical memory cells for characterization speed-up
    trim_netlist = False
    # Run with extracted parasitics
    use_pex = False

    
    ###################
    # Tool options
    ###################
    # Variable to select the variant of spice
    spice_name = ""
    # The spice executable being used which is derived from the user PATH.
    spice_exe = ""
    # Variable to select the variant of drc, lvs, pex
    drc_name = ""
    lvs_name = ""
    pex_name = ""
    # The DRC/LVS/PEX executable being used
    # which is derived from the user PATH.
    drc_exe = None
    lvs_exe = None
    pex_exe = None
    
    # Should we print out the banner at startup
    print_banner = True

    # Define the output file paths
    output_path = "."
    # Define the output file base name
    output_name = ""
    # Use analytical delay models by default
    # rather than (slow) characterization
    analytical_delay = True
    # Purge the temp directory after a successful
    # run (doesn't purge on errors, anyhow)
    purge_temp = True

    # These are the default modules that can be over-riden
    bank_select = "bank_select"
    bitcell_array = "bitcell_array"
    bitcell = "bitcell"
    column_mux_array = "single_level_column_mux_array"
    control_logic = "control_logic"
    decoder = "hierarchical_decoder"
    delay_chain = "delay_chain"
    dff_array = "dff_array"
    dff = "dff"
    dummy_bitcell = "dummy_bitcell"
    precharge_array = "precharge_array"
    ptx = "ptx"
    replica_bitcell = "replica_bitcell"
    replica_bitline = "replica_bitline"
    sense_amp_array = "sense_amp_array"
    sense_amp = "sense_amp"
    tri_gate_array = "tri_gate_array"
    tri_gate = "tri_gate"
    wordline_driver = "wordline_driver"
    write_driver_array = "write_driver_array"
    write_driver = "write_driver"
    write_mask_and_array = "write_mask_and_array"