Fixes#3872.
Testing this is a bit tricky, as the front-end fixes up the operand
widths in shifts to match, and we need V3Const to introduce a mismatched
one by reducing `4'd2 ** x` (with x being 2 2-bit wide signal) to `4'd1
<< x`, but t_dfg_peephole runs with V3Const disabled exactly because it
makes it hard to write tests. Rather than fixing this one case in
V3Const (which we should do systematically at some point), I fixed DFG
to accept these just in case V3Const generates more of them. The
assertions were there only because of paranoia (as I thought these were
not possible inputs), the code otherwise works.
In order to avoid unexpected breakage on multi-driven variables, we
resolve in DFG construction by using only the first driver encountered.
Also issues the MULTIDRIVEN error for these signals.
Replace the 'run to fixed point' algorithm with a work list driven
approach. Instead of marking the graph as changed, we explicitly add
vertices to the work list, to be visited, when a vertex is changed. This
improves both memory locality (as the work list is processed in last in
first out order), and removed unnecessary visitations when only a few
nodes changes.
Folding an AstLogAnd with a non-zero constant operand used to coerce the
type of the other operand, yielding an ill-typed node that DFG was then
unhappy about. Add a RedOr instead if the width of the replacement
operand is greater than zero.
Fixes#3726
Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
In V3Active, we try hard to turn `always @(a or b or c)` into an
`always_comb` if the only variables read in the block are also in the
sensitivity list. In addition, also allow this optimization when reading
variables that are not in the sensitivity list, but are known to be
constant/never changing after initialization. In particular lookup
tables introduced by V3Table are covered by this. This can have a
significant impact on designs that use the `always @(a or b or c)` style
for combinational logic.
In non-static contexts like class objects or stack frames, the use of
global trigger evaluation is not feasible. The concept of dynamic
triggers allows for trigger evaluation in such cases. These triggers are
simply local variables, and coroutines are themselves responsible for
evaluating them. They await the global dynamic trigger scheduler object,
which is responsible for resuming them during the trigger evaluation
step in the 'act' eval region. Once the trigger is set, they await the
dynamic trigger scheduler once again, and then get resumed during the
resumption step in the 'act' eval region.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
This changeset brings support for accesses like:
class Cls#(type TYPE1);
TYPE1::some_method();
endclass
It is done by delaying dot resolution on type parameters until they get
resolved by V3Param, and doing a more thorough reference skip.
Prevents the possibility of assigning an integer to a class reference,
both at the SystemVerilog and the emitted C++ levels.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
`V3SchedTiming` currently assumes that if a fork still exists, it must
have statements within it (otherwise it would have been deleted by
`V3Timing`). However, in a case like this:
```
module t;
reg a;
initial fork a = 1; join
endmodule
```
the assignment in the fork is optimized out by `V3Dead` after
`V3Timing`. This leads to `V3SchedTiming` accessing fork's `stmtsp`
pointer, which at this point is null. This patch addresses that issue.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
Allow constant folding through adjacent nodes of all associative
operations, for example '((a & 2) & 3)' or '(3 & (2 & a))' can now be
folded into '(a & 2)' and '(2 & a)' respectively. Also improve speed of
making associative expression trees right leaning by using rotation of
the existing vertices whenever instead of allocation of new nodes.
Only apply when there is guaranteed to be a subsequent constant folding
and elimination of some of the expression, otherwise this sometimes
interferes with the simplification of concatenations and harms overall
performance.
Also added a testing only -fno-const-before-dfg option, as otherwise
V3Const eats up a lot of the simple inputs. A lot of the things V3Const
swallows in the simple cases can make it to DFG in complex cases, or DFG
itself can create them during optimization. In any case to save
complexity of testing DFG constant folding, we use this option to turn
off V3Const prior to the DFG passes in the relevant test.
Some optimizations are only a net win if they help us remove a graph
node (or at least ensure they don't grow the graph), or yields otherwise
special logic, so try to apply them only in these cases.
A lot of optimizations in DFG assume a DAG, but the more things are
representable, the more likely it is that a small cyclic sub-graph is
present in an otherwise very large graph that is mostly acyclic. In
order to avoid loosing optimization opportunities, we explicitly extract
the cyclic sub-graphs (which are the strongly connected components +
anything feeing them, up to variable boundaries) and treat them
separately. This enables optimization of the remaining input.
This change introduces a custom reference-counting pointer class that
allows creating such pointers from 'this'. This lets us keep the
receiver object around even if all references to it outside of a class
method no longer exist. Useful for coroutine methods, which may outlive
all external references to the object.
The deletion of objects is deferred until the next time slot. This is to
make clearing the triggered flag on named events in classes safe
(otherwise freed memory could be accessed).
Added a new data-flow graph (DFG) based combinational logic optimizer.
The capabilities of this covers a combination of V3Const and V3Gate, but
is also more capable of transforming combinational logic into simplified
forms and more.
This entail adding a new internal representation, `DfgGraph`, and
appropriate `astToDfg` and `dfgToAst` conversion functions. The graph
represents some of the combinational equations (~continuous assignments)
in a module, and for the duration of the DFG passes, it takes over the
role of AstModule. A bulk of the Dfg vertices represent expressions.
These vertex classes, and the corresponding conversions to/from AST are
mostly auto-generated by astgen, together with a DfgVVisitor that can be
used for dynamic dispatch based on vertex (operation) types.
The resulting combinational logic graph (a `DfgGraph`) is then optimized
in various ways. Currently we perform common sub-expression elimination,
variable inlining, and some specific peephole optimizations, but there
is scope for more optimizations in the future using the same
representation. The optimizer is run directly before and after inlining.
The pre inline pass can operate on smaller graphs and hence converges
faster, but still has a chance of substantially reducing the size of the
logic on some designs, making inlining both faster and less memory
intensive. The post inline pass can then optimize across the inlined
module boundaries. No optimization is performed across a module
boundary.
For debugging purposes, each peephole optimization can be disabled
individually via the -fno-dfg-peepnole-<OPT> option, where <OPT> is one
of the optimizations listed in V3DfgPeephole.h, for example
-fno-dfg-peephole-remove-not-not.
The peephole patterns currently implemented were mostly picked based on
the design that inspired this work, and on that design the optimizations
yields ~30% single threaded speedup, and ~50% speedup on 4 threads. As
you can imagine not having to haul around redundant combinational
networks in the rest of the compilation pipeline also helps with memory
consumption, and up to 30% peak memory usage of Verilator was observed
on the same design.
Gains on other arbitrary designs are smaller (and can be improved by
analyzing those designs). For example OpenTitan gains between 1-15%
speedup depending on build type.
- Rename `--dump-treei` option to `--dumpi-tree`, which itself is now a
special case of `--dumpi-<tag>` where tag can be a magic word, or a
filename
- Control dumping via static `dump*()` functions, analogous to `debug()`
- Make dumping independent of the value of `debug()` (so dumping always
works even without the debug flag)
- Add separate `--dumpi-graph` for dumping V3Graphs, which is again a
special case of `--dumpi-<tag>`
- Alias `--dump-<tag>` to `--dumpi-<tag> 3` as before
Before this change, some forked processes were being inlined in
`V3Timing` because they contained no `CAwait`s. This only works under
the assumption that no `CAwait`s will be added there later, which is not
true, as a function called by a forked process could be turned into a
coroutine later. The call would be wrapped in a new `CAwait`, but the
process itself would have already been inlined at this point.
This commit moves the inlining to `transformForks` in `V3SchedTiming`,
which is called at a point when all `CAwait`s are already in place.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
The recent patch to defer substitutions on V3Gate crashes on circular
logic that has cycle length >= 3 with all inlineable signals (cycle
length 2 is detected correctly and is not inlined). Fix by stopping
recursion at the loop-back edge.
Fixes#3543
Adds timing support to Verilator. It makes it possible to use delays,
event controls within processes (not just at the start), wait
statements, and forks.
Building a design with those constructs requires a compiler that
supports C++20 coroutines (GCC 10, Clang 5).
The basic idea is to have processes and tasks with delays/event controls
implemented as C++20 coroutines. This allows us to suspend and resume
them at any time.
There are five main runtime classes responsible for managing suspended
coroutines:
* `VlCoroutineHandle`, a wrapper over C++20's `std::coroutine_handle`
with move semantics and automatic cleanup.
* `VlDelayScheduler`, for coroutines suspended by delays. It resumes
them at a proper simulation time.
* `VlTriggerScheduler`, for coroutines suspended by event controls. It
resumes them if its corresponding trigger was set.
* `VlForkSync`, used for syncing `fork..join` and `fork..join_any`
blocks.
* `VlCoroutine`, the return type of all verilated coroutines. It allows
for suspending a stack of coroutines (normally, C++ coroutines are
stackless).
There is a new visitor in `V3Timing.cpp` which:
* scales delays according to the timescale,
* simplifies intra-assignment timing controls and net delays into
regular timing controls and assignments,
* simplifies wait statements into loops with event controls,
* marks processes and tasks with timing controls in them as
suspendable,
* creates delay, trigger scheduler, and fork sync variables,
* transforms timing controls and fork joins into C++ awaits
There are new functions in `V3SchedTiming.cpp` (used by `V3Sched.cpp`)
that integrate static scheduling with timing. This involves providing
external domains for variables, so that the necessary combinational
logic gets triggered after coroutine resumption, as well as statements
that need to be injected into the design eval function to perform this
resumption at the correct time.
There is also a function that transforms forked processes into separate
functions.
See the comments in `verilated_timing.h`, `verilated_timing.cpp`,
`V3Timing.cpp`, and `V3SchedTiming.cpp`, as well as the internals
documentation for more details.
Signed-off-by: Krzysztof Bieganski <kbieganski@antmicro.com>
Wilson Snyder
Andrew Nolte
Krzysztof Boroński
Ryszard Rozak
Felix Neumärker
Kamil Rakoczy
Cameron Kirk
Felix Neumärker
Adam Bagley
Todd Strader
Aleksander Kiryk
Joseph Nwabueze
github action
Larry Doolittle
Ilya Barkov
Varun Koyyalagunta
Geza Lore
James Shi
Joey Liu
Gökçe Aydos
Yutetsu TAKATSUKASA
Krzysztof Bieganski
Jevin Sweval
Mariusz Glebocki
Yinan Xu
Yves Mathieu
Mariusz Glebocki
Arkadiusz Kozdra
Topa Topino
Marcel Chang
Kanad Kanhere
Jake Merdich
Yu-Sheng Lin
Gustav Svensk
Mladen Slijepcevic
Aleksander Kiryk