BOOL values have a specific cast from LOGIC, this node takes care
of it. Also arrange for the elaboration to insert them in the right
planes and for the code generator to generate them.
This patch adds -Wextra to the compilation flags for C++ files in
the vvp and vpi subdirectories. It also fixes all the problems
found while adding -Wextra. This mostly entailed removing some of
the unused arguments, removing the name for others and using the
correct number of initializers.
This patch adds a few missing initializations to various constructors
in the vvp directory. It also enhances the array alias code to copy
more values from the aliased array.
Create the .var/2u and .var/2s variable records and give them
basic implementations. Make available to VPI the proper types
for the SystemVerilog types that these variables represent.
This patch adds checks that the delay count is correct for the
various gates and adds support for a missing variable decay
time. For this case the decay time is the minimum of the rise
and fall times. This is denoted by setting the decay variable
to 0 in the vvp file. vvp notes this and sets an ignore decay
time property in the base delay. This turns off the ability
to set the decay time and the minimum delay calculation will
also update the decay time.
This patch adds two new opcodes and the infrastructure needed to call
system functions as tasks. The normal %vpi_call will generate an error
if a system function is called as a task. %vpi_call/w will generate a
warning and will ignore any value returned by the function. %vpi_call/i
will ignore the system function return value and will not print a
message. Adding this is a feature request and is supported in
SystemVerilog. Next I need to add flags to control this depending on
the compiler generation and possibly other flags.
I may leave the cast to void (%vpi_call/i) functionality unimplemented
for now.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
This patch is similar to the previous patches and cleans up a single
place in the vvp directory where an enum had a trailing ',' and a
place where a C++ routine needed extern "C".
This patch cleans up some style issues: no need to check that a value
is defined before freeing or deleting it, use C++ style casts, make
sure to NULL terminate strncpy(), empty() is faster than size() for
size == 0 or size >= 0 checks, re-scope some variables, etc.
To match the behaviour of other simulators, delayed bit-based signals
should have the value 'x' and delayed real valued signals should have
the value 0.0 until the true initial value has propagated. This patch
provides this behaviour.
In combination with the patch to make all operations on thread words
operate on 64-bit values, this patch ensures casts between real values
and large vector values work correctly.
The vvp thread word storage had previously been changed to always store
64-bit values, but some instructions still only operate on native long
values. This patch ensures all instructions that modify thread words
support 64-bit values.
The Cygwin compiler is a bit picky. This patch adds some casts
to remove compilation warnings. In the past I have had warnings
off because of problems with the STL, but for this directory we
may as well squash as many warings as we can. It also does not
recognize that an assert(0) or assert(false) ends a routine so
it complains about no return at end of function or variables
not being defined.
Handle the case where the input to a net is a constant. Since nets
do not exist anymore as nodes in their own right, we need to create
a driver to drive a net from a constant.
Handle forward references of net inputs.
The out pointer of a vvp_net_t object is going to be a bit more
sophisticated when we redo the handling of net signals. Take a step
towards this rework by making the pointer private and implementing
methods needed to access it.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
This patch adds code to free most of the memory when vvp
finishes. It also adds valgrind hooks to manage the various
memory pools. The functionality is enabled by passing
--with-valgrind to configure. It requires that the
valgrind/memcheck.h header from a recent version of
valgrind be available. It check for the existence of this
file, but not that it is new enough (version 3.1.3 is known
to not work and version 3.4.0 is known to work).
You can still use valgrind when this option is not given,
but you will have memory that is not released and the
memory pools show as a single block.
With this vvp is 100% clean for many of the tests in the
test suite. There are still a few things that need to be
cleaned up, but it should be much easier to find any real
leaks now.
Enabling this causes a negligible increase in run time and
memory. The memory could be a problem for very large
simulations. The increase in run time is only noticeable on
very short simulations where it should not matter.
This patch fixes some more memory leaks in vvp. Mostly related
to UDP compilation and one in find_scope() that was found when
testing the VPI code. The leak in ivlpp was that the define
temporary buffer not being freed when the lexor was finished.
This patch fixes a bunch of memory leaks in vvp and converts the
T_STRING lexical token to be new based. There are still two
known leaks that I need to find a way to fix and likely some
unknown leaks that still need to be found and fixed.
Tran islands are a kinds of island, so seperate the tran handling
from the core island concept. This will allow for creating new
kinds of islands. (Think analog.)
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
This patch fixes a number of problems related to the divide and
modulus operators.
The net version (CA) of modulus did not support a signed version.
Division or modulus of a value wider than the machine word did
not correctly check for division by zero and return 'bx.
Fixed a problem in procedural modulus. The sign of the result is
only dependent on the L-value.
Division or modulus of a signed value that was the same width as
the machine word was creating an incorrect sign mask.
Division of a signed value that would fit into a single machine
word was not checking for division by zero.
Division or modulus of a wide value was always being done as
unsigned.
Added a negative operator for vvp_vector2_t. This made
implementing the signed wide division and modulus easier.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
This patch splits any VVP net functor that needs to access both
statically and automatically allocated state into two sub-classes,
one for handling operations on statically allocated state, the
other for handling operations on automatically allocated state.
This undoes the increase in run-time memory use introduced when
automatic task/function support was first introduced.
This patch also fixes various issues with event handling in automatic
scopes. Event expressions in automatic scopes may now reference either
statically or automatically allocated variables or arrays, or part
selects or word selects thereof. More complex expressions (e.g.
containing arithmetic or logical operators, function calls, etc.) are
not currently supported.
This patch introduces some error checking for language constructs
that may not reference automatically allocated variables. Further
error checking will follow in a subsequent patch.
Start cleaning up shadowed variables, flagged by turning on -Wshadow.
No intended change in functionality. Patch looks right, and is tested
to compile and run on my machine. YMMV.
This patch adds non-blocking event control for array words.
It also fixes a problem where the word used to put the
calculated delay for a non-blocking array assignment was
not being released. It also fixes the non-blocking array
assignments to correctly handle off the end/beginning part
selects.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
This patch adds .cast/int and updates .cast/real to act as a local
(temporary) net and to support either a signed or unsigned input.
The vvp_vector4_t class not can convert an arbitrarily sized double
to a vector value. This removes the restriction of lround().
Also document the new statements.
This handles the general case of a non-real operand to a real-valued
division. This can turn up if only 1 operand of a divide is real. In
this case the division as a whole is real and the other operand must
be cast to real.
This method creates an extra node, but it should be a very compact
node and this node does no evaluation tricks so in the run time should
be no more expensive then folding the cast into the .arith/div.r itself.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The %load/vp0 instruction adds a signed value to the signal value being
loaded, but it doesn't allow for a signed source vector. Add the
%load/vp0/s instruction that pads the loaded vector, and add the code
generator details to properly use it.
The vvp_vector8_t constructor and destructor involve memory allocation
so it is best to pass these objects by reference as much as possible.
Also have the islands take more care not to perform resolution if the
inputs aren't really different.
NOTE: This is a port of commit 2f4e5bf5b6
from the "performance" branch, without the resolver scheduling changes.
This was causing test suite variances with pr1820472.v. It looks like
there might be a race in that program anyhow, but for now leave out the
resolver scheduling changes so that the rest of this commit can go in.
The vvp_island classes are added, as well as support for tranif nodes
that use this concept. The result is a working implementation for
tranif0 and tranif1.
In the process, the symbol table functions were cleaned up and made
into templates for better type safety, and the vvp_net_ptr_t was
generalized so that it can be used by the branches in the island
implementation.
Also fix up the array handling to use the better symbol table support,
and to remember to clear its own table when linking is done.
Clarify that operands are typically 32bits, and have the code generator
make better use of this.
Also improve the %movi implementation to work well with marger vectors.
Add the %andi instruction to use immediate operands.
It is possible for the code generator to create .array/port objects
before the .array object that the port refereces, so use the resolv_list
to arrange for binding during cleanup.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
This patch adds code to push the file and line information
for scope objects (modules, functions, tasks, etc.) to the
runtime. For modules, this includes the definition fields.
This patch adds ifnone functionality. It does not produce an
error when both an ifnone and an unconditional simple module
path are given. For this case the ifnone delays are ignored.
Remove dependencies on vvp_bit4_encoding outside of the vvp_net
core types. The table_functor_s class was the worst offfender and
was barely used, so it is now removed completely. There are a few
opcodes in vhtread.cc that also make vvvp_bit4_t encoding
assumptions (and used casts) and those have been fixed. There
were also various VPI interface functions that are fixed.
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
vvp did not have the ability to handle real parameters.
This patch fixes that omission. Parameters are only used
by vpi calls to get compile time information.
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
This patch adds the power operator for signed bit based values
in a continuous assignment. It also fixes a few other power
expression width problems. The expression width is still not
calculated correctly, since the correct method can produce huge
possible bit widths. The result is currently limited to the width
of the native long. This is because lround() is used to convert
from a double to an integer. A check in the code generator protects
the runtime from this limitation.
This patch adds the power operator for unsigned bit based values
in a continuous assignment. It also refactors the power code for
normal expressions and continuous assignments.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
Rework the encoding of a real value in the Cr<> label to be similar to
the format used by the %loadi/wr instruction. This mantissa-expoment
format better carries all the bits of the desired real value with
plenty of fidelity and range.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
Add the vpiFile and vpiLineNo properties to system functions.
Most other objects have stubs that return "N/A"/0. Interactive
functions (called from the debugger) use <interactive> for the
file name.
Parse SDF file annotations of edge sensitive delay paths.
Add vpi support for getting the specified edge sensitivity of
an edge sensitive path, and annotate paths with proper attention
to the edge that is specified for the path.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
Where and expression is an immediate value added to a signal value,
it is possible to optimize them to a single instruction that combines
the load with an add at the same time.
The modpath source node defines the modpath object, and carries the
nodes for the source expression. The modpath outputs are references
by pointers to the vpiModPath that is not in itself a vpi object
any more. This makes the VPI view of a module path look like the
source-destinaiton pair that is the IEEE1364 description of the
modpath.
Add vvp support for modpath path term outputs. This also introduces
the concept of path terms and moves towards the path term in general
for getting at the endpoits of a modpath.
Clean up rather poorly written modpath vpi support, fixing the
parse of the modpath syntax element to not use pointless globals.
Collect the modpath code into the delay.cc file instead of the
inapropriate vpi_signal.cc source file.
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <steve@icarus.com>
Add support for accessing the modpath nodes via PLI,
and add support for the vpi_set_delays and vpi_put_delays
functions to set the delays on those paths.
- GSoC 2007
Modified the code that deals with real variables to accept an integer
value when using vpi_put_value(). Also added some type of diagnostic
message for all switch defaults that have an assert(0) to indicate an
error condition, removed CVS comments and removed a small section of
unreachable code.
Delat the compiletf calls until after all the label references
are resolved and link bindings are complete. Otherwise, there may
be dangling references.
Signed-off-by: Stephen Williams <steve@icarus.com>
The runtime is a vvp runtime engine debug aid that allows for
detailed dump into a debug log. The trace is enabled by setting
the VVP_DEBUG variable and activating specific debug messages
in the vvp source.
Signed-off-by: Stephen Williams <steve@icarus.com>
more general concept of arrays. The NetMemory and NetEMemory
classes are removed from the ivl core program, and the IVL_LPM_RAM
lpm type is removed from the ivl_target API.
Stephen Williams
Cary R
Martin Whitaker
Martin Whitaker
Larry Doolittle
yang yun ju
steve