xschem/src/select.c

/* File: select.c
 *
 * This file is part of XSCHEM,
 * a schematic capture and Spice/Vhdl/Verilog netlisting tool for circuit
 * simulation.
 * Copyright (C) 1998-2021 Stefan Frederik Schippers
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include "xschem.h"

/* select all nets and pins/labels that are *physically* connected to current selected wire segments */
/* stop_at_junction==1 --> stop selecting wires at 'T' junctions */
/* Recursive routine */
static void check_connected_wire(int stop_at_junction, int n)
{ 
  int k, touches;
  xWire * const wire = xctx->wire;
  Wireentry *wireptr;
  Instentry *instptr;
  char *type;
  double x1, y1, x2, y2;
  Iterator_ctx ctx;
  
  x1 = wire[n].x1;
  y1 = wire[n].y1;
  x2 = wire[n].x2;
  y2 = wire[n].y2;
  RECTORDER(x1, y1, x2, y2);
  dbg(1, "check_connected_wire(): n=%d, %g %g %g %g\n", n, x1, y1, x2, y2);
  for(init_inst_iterator(&ctx, x1, y1, x2, y2); (instptr = inst_iterator_next(&ctx)) ;) {
    k = instptr->n;
    type = (xctx->inst[k].ptr+ xctx->sym)->type;
    if( type && (IS_LABEL_SH_OR_PIN(type) || !strcmp(type, "probe") || !strcmp(type, "ngprobe"))) {
      double rx1, ry1, x0, y0;
      int rot, flip;
      xRect *rct;
      rct=(xctx->inst[k].ptr+ xctx->sym)->rect[PINLAYER];
      if(rct) {
        x0=(rct[0].x1+rct[0].x2)/2;
        y0=(rct[0].y1+rct[0].y2)/2;
        rot=xctx->inst[k].rot;
        flip=xctx->inst[k].flip;
        ROTATION(rot, flip, 0.0,0.0,x0,y0,rx1,ry1);
        x0=xctx->inst[k].x0+rx1;
        y0=xctx->inst[k].y0+ry1;
        touches = touch(wire[n].x1, wire[n].y1, wire[n].x2, wire[n].y2, x0, y0);
        if(touches) {
          xctx->need_reb_sel_arr=1;
          xctx->inst[k].sel = SELECTED;
        }
      }
    }
  }
  for(init_wire_iterator(&ctx, x1, y1, x2, y2); (wireptr = wire_iterator_next(&ctx)) ;) {
    k = wireptr->n;
    if(n == k || xctx->wire[k].sel == SELECTED) continue;
    if(!stop_at_junction) {
      touches = touch(wire[n].x1, wire[n].y1, wire[n].x2, wire[n].y2, wire[k].x1, wire[k].y1) ||
                touch(wire[n].x1, wire[n].y1, wire[n].x2, wire[n].y2, wire[k].x2, wire[k].y2) ||
                touch(wire[k].x1, wire[k].y1, wire[k].x2, wire[k].y2, wire[n].x1, wire[n].y1) ||
                touch(wire[k].x1, wire[k].y1, wire[k].x2, wire[k].y2, wire[n].x2, wire[n].y2);
    } else {
      touches = (wire[n].x1 == wire[k].x1 && wire[n].y1 == wire[k].y1 && wire[n].end1 < 2 && wire[k].end1 < 2) ||
                (wire[n].x1 == wire[k].x2 && wire[n].y1 == wire[k].y2 && wire[n].end1 < 2 && wire[k].end2 < 2) ||
                (wire[n].x2 == wire[k].x1 && wire[n].y2 == wire[k].y1 && wire[n].end2 < 2 && wire[k].end1 < 2) ||
                (wire[n].x2 == wire[k].x2 && wire[n].y2 == wire[k].y2 && wire[n].end2 < 2 && wire[k].end2 < 2);
    } 
    if(touches) {
      xctx->need_reb_sel_arr=1;
      xctx->wire[k].sel = SELECTED;
      check_connected_wire(stop_at_junction, k); /* recursive check */
    }
  }
}

/* stop_at_junction==1 --> stop selecting wires at 'T' junctions */
void select_connected_wires(int stop_at_junction)
{
  int i, n;

  if(stop_at_junction) trim_wires();
  hash_wires();
  hash_instances();
  rebuild_selected_array(); /* does nothing as already done in most of use cases */
  for(n=0; n<xctx->lastsel; n++) {
    i = xctx->sel_array[n].n;
    switch(xctx->sel_array[n].type) {
      char *type;
      case WIRE:
        if(xctx->wire[i].sel == SELECTED) check_connected_wire(stop_at_junction, i);
        break;
      case ELEMENT:
        type = (xctx->inst[i].ptr+ xctx->sym)->type;
        if( type && (IS_LABEL_SH_OR_PIN(type) || !strcmp(type, "probe") || !strcmp(type, "ngprobe"))) {
          double rx1, ry1, x0, y0;
          int rot, flip, sqx, sqy;
          xRect *rct;
          Wireentry *wptr;
          rct = (xctx->inst[i].ptr+ xctx->sym)->rect[PINLAYER];
          if(rct) {
            x0 = (rct[0].x1 + rct[0].x2) / 2;
            y0 = (rct[0].y1 + rct[0].y2) / 2;
            rot = xctx->inst[i].rot;
            flip = xctx->inst[i].flip;
            ROTATION(rot, flip, 0.0,0.0,x0,y0,rx1,ry1);
            x0 = xctx->inst[i].x0+rx1;
            y0 = xctx->inst[i].y0+ry1;
            get_square(x0, y0, &sqx, &sqy);
            wptr = xctx->wire_spatial_table[sqx][sqy];
            while (wptr) {
               dbg(1, "select_connected_wires(): x0=%g y0=%g wire[%d]=%g %g %g %g\n",
                   x0, y0, wptr->n, xctx->wire[wptr->n].x1, xctx->wire[wptr->n].y1,
                                    xctx->wire[wptr->n].x2, xctx->wire[wptr->n].y2);
               if (touch(xctx->wire[wptr->n].x1, xctx->wire[wptr->n].y1,
                   xctx->wire[wptr->n].x2, xctx->wire[wptr->n].y2, x0,y0)) {
                 xctx->wire[wptr->n].sel = SELECTED;
                 check_connected_wire(stop_at_junction, wptr->n);
               }
               wptr=wptr->next;
            }
          } /* if(rct) */
        } /* if(type & ...) */
        break;
      default:
        break;
    } /* switch(...) */
  } /* for(... lastsel ...) */
  rebuild_selected_array();
  draw_selection(xctx->gc[SELLAYER], 0);
}


void symbol_bbox(int i, double *x1,double *y1, double *x2, double *y2)
{
   int j, tmp;
   xText text;
   const char *tmp_txt;
   short rot,flip;
   double x0, y0 ;
   double text_x0, text_y0;
   short sym_rot, sym_flip;
   double xx1,yy1,xx2,yy2;
   #if HAS_CAIRO==1
   int customfont;
   #endif
   /* symbol bbox */
   flip = xctx->inst[i].flip;
   rot = xctx->inst[i].rot;
   x0=xctx->inst[i].x0;
   y0=xctx->inst[i].y0;
   ROTATION(rot, flip, 0.0,0.0,(xctx->inst[i].ptr+ xctx->sym)->minx,
                    (xctx->inst[i].ptr+ xctx->sym)->miny,*x1,*y1);
   ROTATION(rot, flip, 0.0,0.0,(xctx->inst[i].ptr+ xctx->sym)->maxx,
                    (xctx->inst[i].ptr+ xctx->sym)->maxy,*x2,*y2);
   RECTORDER(*x1,*y1,*x2,*y2);
   *x1+=x0;*y1+=y0;
   *x2+=x0;*y2+=y0;
   xctx->inst[i].xx1 = *x1;               /* 20070314 added bbox without text */
   xctx->inst[i].yy1 = *y1;               /* for easier select */
   xctx->inst[i].xx2 = *x2;
   xctx->inst[i].yy2 = *y2;
   dbg(2, "symbol_bbox(): instance=%s %.16g %.16g %.16g %.16g\n",xctx->inst[i].instname,*x1, *y1, *x2, *y2);
   /* strings bbox */
   for(j=0;j< (xctx->inst[i].ptr+ xctx->sym)->texts;j++)
   {
     sym_flip = flip;
     sym_rot = rot;
     text = (xctx->inst[i].ptr+ xctx->sym)->text[j];
     /* dbg(2, "symbol_bbox(): instance %d text n: %d text str=%s\n", i,j, text.txt_ptr? text.txt_ptr:"NULL"); */
     tmp_txt = translate(i, text.txt_ptr);
     /* dbg(2, "symbol_bbox(): translated text: %s\n", tmp_txt); */
     ROTATION(rot, flip, 0.0,0.0,text.x0, text.y0,text_x0,text_y0);
     #if HAS_CAIRO==1
     customfont=set_text_custom_font(&text);
     #endif
     text_bbox(tmp_txt, text.xscale, text.yscale,
       (text.rot + ( (sym_flip && (text.rot & 1) ) ? sym_rot+2 : sym_rot)) &0x3,
       sym_flip ^ text.flip, text.hcenter, text.vcenter,
       x0+text_x0,y0+text_y0, &xx1,&yy1,&xx2,&yy2, &tmp, &tmp);
     #if HAS_CAIRO==1
     if(customfont) cairo_restore(xctx->cairo_ctx);
     #endif
     if(xx1<*x1) *x1=xx1;
     if(yy1<*y1) *y1=yy1;
     if(xx2>*x2) *x2=xx2;
     if(yy2>*y2) *y2=yy2;
   }
   dbg(1, "symbol_bbox(): instance=%s %.16g %.16g %.16g %.16g\n", xctx->inst[i].instname, *x1, *y1, *x2, *y2);
}


static void del_rect_line_arc_poly(void)
{
 xRect tmp;
 int c, j, i;

 for(c=0;c<cadlayers;c++)
 {
  j = 0;
  for(i=0;i<xctx->rects[c];i++)
  {
   if(xctx->rect[c][i].sel == SELECTED)
   {
    j++;
    bbox(ADD, xctx->rect[c][i].x1, xctx->rect[c][i].y1, xctx->rect[c][i].x2, xctx->rect[c][i].y2);
    my_free(928, &xctx->rect[c][i].prop_ptr);
    set_modify(1);
    continue;
   }
   if(j)
   {
    xctx->rect[c][i-j] = xctx->rect[c][i];
   }
  }
  xctx->rects[c] -= j;
  j = 0;
  for(i=0;i<xctx->lines[c];i++)
  {
   if(xctx->line[c][i].sel == SELECTED)
   {
    j++;
    if(xctx->line[c][i].bus){
      int ov, y1, y2;
      ov = INT_BUS_WIDTH(xctx->lw);
      if(xctx->line[c][i].y1 < xctx->line[c][i].y2) { y1 = xctx->line[c][i].y1-ov; y2 = xctx->line[c][i].y2+ov; }
      else                        { y1 = xctx->line[c][i].y1+ov; y2 = xctx->line[c][i].y2-ov; }
      bbox(ADD, xctx->line[c][i].x1-ov, y1 , xctx->line[c][i].x2+ov , y2 );
    } else {
      bbox(ADD, xctx->line[c][i].x1, xctx->line[c][i].y1 , xctx->line[c][i].x2 , xctx->line[c][i].y2 );
    }
    set_modify(1);
    my_free(929, &xctx->line[c][i].prop_ptr);
    continue;
   }
   if(j)
   {
    xctx->line[c][i-j] = xctx->line[c][i];
   }
  }
  xctx->lines[c] -= j;

  j = 0;
  for(i=0;i<xctx->arcs[c];i++)
  {
   if(xctx->arc[c][i].sel == SELECTED)
   {
    j++;

    if(xctx->arc[c][i].fill)
      arc_bbox(xctx->arc[c][i].x, xctx->arc[c][i].y, xctx->arc[c][i].r, 0, 360,
               &tmp.x1, &tmp.y1, &tmp.x2, &tmp.y2);
    else
      arc_bbox(xctx->arc[c][i].x, xctx->arc[c][i].y, xctx->arc[c][i].r, xctx->arc[c][i].a, xctx->arc[c][i].b,
               &tmp.x1, &tmp.y1, &tmp.x2, &tmp.y2);
    bbox(ADD, tmp.x1, tmp.y1, tmp.x2, tmp.y2);
    my_free(930, &xctx->arc[c][i].prop_ptr);
    set_modify(1);
    continue;
   }
   if(j)
   {
    xctx->arc[c][i-j] = xctx->arc[c][i];
   }
  }
  xctx->arcs[c] -= j;



  j = 0;
  for(i=0;i<xctx->polygons[c];i++)
  {
   if(xctx->poly[c][i].sel == SELECTED)
   {
    int k;
    double x1=0., y1=0., x2=0., y2=0.;
    for(k=0; k<xctx->poly[c][i].points; k++) {
      if(k==0 || xctx->poly[c][i].x[k] < x1) x1 = xctx->poly[c][i].x[k];
      if(k==0 || xctx->poly[c][i].y[k] < y1) y1 = xctx->poly[c][i].y[k];
      if(k==0 || xctx->poly[c][i].x[k] > x2) x2 = xctx->poly[c][i].x[k];
      if(k==0 || xctx->poly[c][i].y[k] > y2) y2 = xctx->poly[c][i].y[k];
    }
    j++;
    bbox(ADD, x1, y1, x2, y2);
    my_free(931, &xctx->poly[c][i].prop_ptr);
    my_free(932, &xctx->poly[c][i].x);
    my_free(933, &xctx->poly[c][i].y);
    my_free(934, &xctx->poly[c][i].selected_point);
    /*fprintf(errfp, "bbox: %.16g %.16g %.16g %.16g\n", x1, y1, x2, y2); */
    set_modify(1);
    continue;
   }
   if(j)
   {
    xctx->poly[c][i-j] = xctx->poly[c][i];
   }
  }
  xctx->polygons[c] -= j;
 }
}


void delete(int to_push_undo)
{
  int i, j, tmp;
  int select_rot = 0, select_flip = 0;
  #if HAS_CAIRO==1
  int customfont;
  #endif
  double xx1,yy1,xx2,yy2;

  dbg(3, "delete(): start\n");
  j = 0;
  bbox(START, 0.0 , 0.0 , 0.0 , 0.0);
  rebuild_selected_array();
  if(to_push_undo && xctx->lastsel) xctx->push_undo();
  /* first calculate bbox, because symbol_bbox() needs translate (@#0:net_name) which
   *  needs prepare_netlist_structs which needs a consistent xctx->inst[] data structure */
  find_inst_to_be_redrawn(4 + 32); /* 32: call prepare_netlist_structs(0) if show net names enabled
                                        *  4: call symbol_bbox() to precisely update bbox to current zoom level
                                        */
  for(i=0;i<xctx->texts;i++)
  {
    if(xctx->text[i].sel == SELECTED)
    {
      select_rot = xctx->text[i].rot;
      select_flip = xctx->text[i].flip;
      #if HAS_CAIRO==1
      customfont = set_text_custom_font(&xctx->text[i]);
      #endif
      text_bbox(xctx->text[i].txt_ptr, xctx->text[i].xscale,
                xctx->text[i].yscale, select_rot, select_flip, xctx->text[i].hcenter,
                xctx->text[i].vcenter, xctx->text[i].x0, xctx->text[i].y0,
                &xx1,&yy1, &xx2,&yy2, &tmp, &tmp);
      #if HAS_CAIRO==1
      if(customfont) cairo_restore(xctx->cairo_ctx);
      #endif
      bbox(ADD, xx1, yy1, xx2, yy2 );
      my_free(935, &xctx->text[i].prop_ptr);
      my_free(936, &xctx->text[i].font);
      my_free(937, &xctx->text[i].txt_ptr);
      set_modify(1);
      j++;
      continue;
    }
    if(j)
    {
      dbg(1, "select(); deleting string %d\n",i-j);
      xctx->text[i-j] = xctx->text[i];
      dbg(1, "select(); new string %d = %s\n",i-j,xctx->text[i-j].txt_ptr);
    }
  }
  xctx->texts -= j;
  j = 0;

  for(i=0;i<xctx->instances;i++)
  {
    if(xctx->inst[i].sel == SELECTED)
    {
      set_modify(1);
      if(xctx->inst[i].prop_ptr != NULL)
      {
        my_free(938, &xctx->inst[i].prop_ptr);
      }
      delete_inst_node(i);
      my_free(939, &xctx->inst[i].name);
      my_free(940, &xctx->inst[i].instname);
      my_free(878, &xctx->inst[i].lab);
      j++;
      continue;
    }
    if(j)
    {
      xctx->inst[i-j] = xctx->inst[i];
    }
  }
  xctx->instances-=j;

  if(j) {
    xctx->prep_hash_inst=0;
    xctx->prep_net_structs=0;
    xctx->prep_hi_structs=0;
  }
  j = 0;
  for(i=0;i<xctx->wires;i++)
  {
    if(xctx->wire[i].sel == SELECTED) {
      j++;
      if(xctx->wire[i].bus){
        int ov, y1, y2;
        ov = INT_BUS_WIDTH(xctx->lw)> cadhalfdotsize ? INT_BUS_WIDTH(xctx->lw) : CADHALFDOTSIZE;
        if(xctx->wire[i].y1 < xctx->wire[i].y2) { y1 = xctx->wire[i].y1-ov; y2 = xctx->wire[i].y2+ov; }
        else                        { y1 = xctx->wire[i].y1+ov; y2 = xctx->wire[i].y2-ov; }
        bbox(ADD, xctx->wire[i].x1-ov, y1 , xctx->wire[i].x2+ov , y2 );
      } else {
        int ov, y1, y2;
        ov = cadhalfdotsize;
        if(xctx->wire[i].y1 < xctx->wire[i].y2) { y1 = xctx->wire[i].y1-ov; y2 = xctx->wire[i].y2+ov; }
        else                        { y1 = xctx->wire[i].y1+ov; y2 = xctx->wire[i].y2-ov; }
        bbox(ADD, xctx->wire[i].x1-ov, y1 , xctx->wire[i].x2+ov , y2 );
      }

      my_free(941, &xctx->wire[i].prop_ptr);
      my_free(942, &xctx->wire[i].node);

      set_modify(1);
      continue;
    }
    if(j) {
      xctx->wire[i-j] = xctx->wire[i];
    }
  }
  xctx->wires -= j;
  if(j) {
    xctx->prep_hash_wires=0;
    xctx->prep_net_structs=0;
    xctx->prep_hi_structs=0;
  }
  if(tclgetboolvar("autotrim_wires")) trim_wires();
  del_rect_line_arc_poly();
  update_conn_cues(0, 0);
  if(xctx->hilight_nets) {
    propagate_hilights(1, 1, XINSERT_NOREPLACE);
  }

  find_inst_to_be_redrawn(2 + 4 + 8 + 32); /* 32: call prepare_netlist_structs(0)
                                        *  2: add previously built list
                                        *  4: call symbol_bbox to precisely update bboxes <<< needed?
                                        *  8: do not iterate over selection (there is no more selection, deleted)
                                        */
  find_inst_to_be_redrawn(16); /* clear data */
  xctx->lastsel = 0;
  bbox(SET , 0.0 , 0.0 , 0.0 , 0.0);
  draw();
  bbox(END , 0.0 , 0.0 , 0.0 , 0.0);
  xctx->ui_state &= ~SELECTION;
}


void delete_only_rect_line_arc_poly(void)
{
 bbox(START, 0.0 , 0.0 , 0.0 , 0.0);
 del_rect_line_arc_poly();
 xctx->lastsel = 0;
 bbox(SET , 0.0 , 0.0 , 0.0 , 0.0);
 draw();
 bbox(END , 0.0 , 0.0 , 0.0 , 0.0);
 xctx->ui_state &= ~SELECTION;
}


void bbox(int what,double x1,double y1, double x2, double y2)
{
 dbg(1, "bbox: what=%d\n", what);
 switch(what)
 {
  case START:
   if(xctx->sem==1) {
     fprintf(errfp, "ERROR: rentrant bbox() call\n");
     tcleval("alert_ {ERROR: reentrant bbox() call} {}");
   }
   xctx->bbx1 = 300000000; /* screen coordinates */
   xctx->bbx2 = 0;
   xctx->bby1 = 300000000;
   xctx->bby2 = 0;
   xctx->savex1 = xctx->areax1;
   xctx->savex2 = xctx->areax2;
   xctx->savey1 = xctx->areay1;
   xctx->savey2 = xctx->areay2;
   xctx->savew = xctx->areaw;
   xctx->saveh = xctx->areah;
   xctx->savexrect = xctx->xrect[0];
   xctx->sem=1;
   break;
  case ADD:
   if(xctx->sem==0) {
     fprintf(errfp, "ERROR: bbox(ADD) call before bbox(START)\n");
     tcleval("alert_ {ERROR: bbox(ADD) call before bbox(START)} {}");
   }
   dbg(2, "bbox(ADD): %.16g %.16g %.16g %.16g\n", x1, y1, x2, y2);
   x1=X_TO_SCREEN(x1);
   y1=Y_TO_SCREEN(y1);
   x2=X_TO_SCREEN(x2);
   y2=Y_TO_SCREEN(y2);
   x1=CLIP(x1,xctx->savex1,xctx->savex2);
   x2=CLIP(x2,xctx->savex1,xctx->savex2);
   y1=CLIP(y1,xctx->savey1,xctx->savey2);
   y2=CLIP(y2,xctx->savey1,xctx->savey2);
   if(x1 < xctx->bbx1) xctx->bbx1 = (int) x1;
   if(x2 > xctx->bbx2) xctx->bbx2 = (int) x2;
   if(y1 < xctx->bby1) xctx->bby1 = (int) y1;
   if(y2 > xctx->bby2) xctx->bby2 = (int) y2;
   if(y2 < xctx->bby1) xctx->bby1 = (int) y2;
   if(y1 > xctx->bby2) xctx->bby2 = (int) y1;
   break;
  case END:
   if(xctx->sem) {
     xctx->areax1 = xctx->savex1;
     xctx->areax2 = xctx->savex2;
     xctx->areay1 = xctx->savey1;
     xctx->areay2 = xctx->savey2;
     xctx->areaw =  xctx->savew;
     xctx->areah =  xctx->saveh;
     xctx->xrect[0] = xctx->savexrect;
     if(has_x) {
       dbg(2, "bbox(END): resetting clip area: %d %d %d %d\n",
          xctx->xrect[0].x, xctx->xrect[0].y, xctx->xrect[0].width, xctx->xrect[0].height);
       set_clip_mask(END);
     }
     xctx->sem=0;
   }
   break;
  case SET:
   if(xctx->sem==0) {
     fprintf(errfp, "ERROR: bbox(SET) call before bbox(START)\n");
     tcleval("alert_ {ERROR: bbox(SET) call before bbox(START)} {}");
   }
   xctx->areax1 = xctx->bbx1-2*INT_WIDTH(xctx->lw);
   xctx->areax2 = xctx->bbx2+2*INT_WIDTH(xctx->lw);
   xctx->areay1 = xctx->bby1-2*INT_WIDTH(xctx->lw);
   xctx->areay2 = xctx->bby2+2*INT_WIDTH(xctx->lw);
   xctx->areaw = (xctx->areax2-xctx->areax1);
   xctx->areah = (xctx->areay2-xctx->areay1);

   xctx->xrect[0].x = xctx->bbx1-INT_WIDTH(xctx->lw);
   xctx->xrect[0].y = xctx->bby1-INT_WIDTH(xctx->lw);
   xctx->xrect[0].width = xctx->bbx2-xctx->bbx1+2*INT_WIDTH(xctx->lw);
   xctx->xrect[0].height = xctx->bby2-xctx->bby1+2*INT_WIDTH(xctx->lw);
   if(has_x) {
     set_clip_mask(SET);
       dbg(2, "bbox(SET): setting clip area: %d %d %d %d\n",
          xctx->xrect[0].x, xctx->xrect[0].y, xctx->xrect[0].width, xctx->xrect[0].height);
   }
   break;
  default:
   break;
 }
}

void unselect_all(void)
{
 int i,c;
 char str[PATH_MAX];
 #if HAS_CAIRO==1
 int customfont;
 #endif
    dbg(1, "unselect_all(): start\n");
    xctx->ui_state = 0;
    xctx->lastsel = 0;

     for(i=0;i<xctx->wires;i++)
     {
      if(xctx->wire[i].sel)
      {
       xctx->wire[i].sel = 0;
       {
         if(xctx->wire[i].bus)
           drawtempline(xctx->gctiled, THICK, xctx->wire[i].x1, xctx->wire[i].y1,
                                              xctx->wire[i].x2, xctx->wire[i].y2);
         else
           drawtempline(xctx->gctiled, ADD, xctx->wire[i].x1, xctx->wire[i].y1,
                                            xctx->wire[i].x2, xctx->wire[i].y2);
       }
      }
     }
    for(i=0;i<xctx->instances;i++)
    {
     if(xctx->inst[i].sel == SELECTED)
     {
      xctx->inst[i].sel = 0;
      for(c=0;c<cadlayers;c++)
        draw_temp_symbol(ADD, xctx->gctiled, i, c,0,0,0.0,0.0);
     }
    }
    for(i=0;i<xctx->texts;i++)
    {
     if(xctx->text[i].sel == SELECTED)
     {
      xctx->text[i].sel = 0;
      #if HAS_CAIRO==1
      customfont = set_text_custom_font(& xctx->text[i]); /* needed for bbox calculation */
      #endif
      draw_temp_string(xctx->gctiled,ADD, xctx->text[i].txt_ptr,
       xctx->text[i].rot, xctx->text[i].flip, xctx->text[i].hcenter, xctx->text[i].vcenter,
       xctx->text[i].x0, xctx->text[i].y0,
       xctx->text[i].xscale, xctx->text[i].yscale);
      #if HAS_CAIRO==1
      if(customfont) cairo_restore(xctx->cairo_ctx);
      #endif
     }
    }
    for(c=0;c<cadlayers;c++)
    {
     for(i=0;i<xctx->arcs[c];i++)
     {
      if(xctx->arc[c][i].sel)
      {
       xctx->arc[c][i].sel = 0;
       drawtemparc(xctx->gctiled, ADD, xctx->arc[c][i].x, xctx->arc[c][i].y,
                                 xctx->arc[c][i].r, xctx->arc[c][i].a, xctx->arc[c][i].b);
      }
     }
     for(i=0;i<xctx->rects[c];i++)
     {
      if(xctx->rect[c][i].sel)
      {
       xctx->rect[c][i].sel = 0;
       drawtemprect(xctx->gctiled, ADD, xctx->rect[c][i].x1, xctx->rect[c][i].y1,
                                  xctx->rect[c][i].x2, xctx->rect[c][i].y2);
      }
     }
     for(i=0;i<xctx->lines[c];i++)
     {
      if(xctx->line[c][i].sel)
      {
       xctx->line[c][i].sel = 0;
       if(xctx->line[c][i].bus)
         drawtempline(xctx->gctiled, THICK, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                      xctx->line[c][i].x2, xctx->line[c][i].y2);
       else
         drawtempline(xctx->gctiled, ADD, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                    xctx->line[c][i].x2, xctx->line[c][i].y2);
      }
     }
     for(i=0;i<xctx->polygons[c];i++)
     {
      if(xctx->poly[c][i].sel)
      {
       int k;
       for(k=0;k<xctx->poly[c][i].points; k++) xctx->poly[c][i].selected_point[k] = 0;
       xctx->poly[c][i].sel = 0;
       drawtemppolygon(xctx->gctiled, NOW, xctx->poly[c][i].x, xctx->poly[c][i].y, xctx->poly[c][i].points);
      }
     }
    }
    drawtemparc(xctx->gctiled, END, 0.0, 0.0, 0.0, 0.0, 0.0);
    drawtemprect(xctx->gctiled, END, 0.0, 0.0, 0.0, 0.0);
    drawtempline(xctx->gctiled,END, 0.0, 0.0, 0.0, 0.0);
    xctx->ui_state &= ~SELECTION;
    /*\statusmsg("",2); */
    my_snprintf(str, S(str), "%s/%s", user_conf_dir, ".selection.sch"); /* 20161115  PWD->HOME */
    xunlink(str);
    dbg(1, "unselect_all(): done\n");
}

void select_wire(int i,unsigned short select_mode, int fast)
{
  char str[1024];       /* overflow safe */
  /*my_strncpy(s,xctx->wire[i].prop_ptr!=NULL?xctx->wire[i].prop_ptr:"<NULL>",256); */
  if( !fast )
  {
    my_snprintf(str, S(str), "selected wire: n=%d end1=%d end2=%d\nnode=%s",i,
           xctx->wire[i].end1, xctx->wire[i].end2,
           xctx->wire[i].prop_ptr? xctx->wire[i].prop_ptr: "(null)");
    statusmsg(str,2);

   my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g  w = %.16g h = %.16g",
      i, xctx->wire[i].x1, xctx->wire[i].y1,
      xctx->wire[i].x2-xctx->wire[i].x1, xctx->wire[i].y2-xctx->wire[i].y1
   );
   statusmsg(str,1);
  }
  if( ((xctx->wire[i].sel|select_mode) == (SELECTED1|SELECTED2)) ||
      ((xctx->wire[i].sel == SELECTED) && select_mode) )
   xctx->wire[i].sel = SELECTED;
  else
   xctx->wire[i].sel = select_mode;
  if(select_mode) {
   dbg(1, "select(): wire[%d].end1=%d, ,end2=%d\n", i, xctx->wire[i].end1, xctx->wire[i].end2);
   if(xctx->wire[i].bus)
     drawtempline(xctx->gc[SELLAYER], THICK, xctx->wire[i].x1, xctx->wire[i].y1, xctx->wire[i].x2, xctx->wire[i].y2);
   else
     drawtempline(xctx->gc[SELLAYER], ADD, xctx->wire[i].x1, xctx->wire[i].y1, xctx->wire[i].x2, xctx->wire[i].y2);
  }
  else {
   if(xctx->wire[i].bus)
     drawtempline(xctx->gctiled, THICK, xctx->wire[i].x1, xctx->wire[i].y1, xctx->wire[i].x2, xctx->wire[i].y2);
   else
     drawtempline(xctx->gctiled, NOW, xctx->wire[i].x1, xctx->wire[i].y1, xctx->wire[i].x2, xctx->wire[i].y2);
  }
  xctx->need_reb_sel_arr=1;
}

void select_element(int i,unsigned short select_mode, int fast, int override_lock)
{
  int c, j;
  char str[1024];       /* overflow safe */
  char s[256];          /* overflow safe */

  if(!strcmp(get_tok_value(xctx->inst[i].prop_ptr, "lock", 0), "true") &&
      select_mode == SELECTED && !override_lock) return;
  my_strncpy(s,xctx->inst[i].prop_ptr!=NULL?xctx->inst[i].prop_ptr:"<NULL>",S(s));
  if( !fast )
  {
    my_snprintf(str, S(str), "selected element %d: %s properties: %s", i, xctx->inst[i].name,s);
    statusmsg(str,2);
    my_snprintf(str, S(str), "symbol name=%s", xctx->inst[i].name==NULL?"(null)":xctx->inst[i].name);
    statusmsg(str,2);
    /* 20190526 */ /*Why this? 20191125 only on small schematics. slow down on big schematics */
    if(xctx->instances < 150) {
      prepare_netlist_structs(0);
      for(j=0;j< (xctx->inst[i].ptr+ xctx->sym)->rects[PINLAYER] ;j++)
      {
        if(xctx->inst[i].node && (xctx->inst[i].ptr+ xctx->sym)->rect[PINLAYER][j].prop_ptr)
        {
          my_snprintf(str, S(str), "pin:%s -> %s",
            get_tok_value(
               (xctx->inst[i].ptr+ xctx->sym)->rect[PINLAYER][j].prop_ptr,"name",0) ,
            xctx->inst[i].node[j] ? xctx->inst[i].node[j] : "__UNCONNECTED_PIN__");
          statusmsg(str,2);
        }
      }
    }
    my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g  w = %.16g h = %.16g",i, 
       xctx->inst[i].xx1, xctx->inst[i].yy1,
       xctx->inst[i].xx2-xctx->inst[i].xx1, xctx->inst[i].yy2-xctx->inst[i].yy1
    );
    statusmsg(str,1);
  }
  xctx->inst[i].sel = select_mode;
  if(select_mode) {
    for(c=0;c<cadlayers;c++) {
      draw_temp_symbol(ADD, xctx->gc[SELLAYER], i,c,0,0,0.0,0.0);
    }
  } else {
    for(c=0;c<cadlayers;c++) {
      draw_temp_symbol(NOW, xctx->gctiled, i,c,0,0,0.0,0.0);
    }
  }
  xctx->need_reb_sel_arr=1;
}

void select_text(int i,unsigned short select_mode, int fast)
{
  char str[1024];       /* overflow safe */
  char s[256];          /* overflow safe */
  #if HAS_CAIRO==1
  int customfont;
  #endif

  if(!fast) {
    my_strncpy(s,xctx->text[i].prop_ptr!=NULL?xctx->text[i].prop_ptr:"<NULL>",S(s));
    my_snprintf(str, S(str), "selected text %d: properties: %s", i,s);
    statusmsg(str,2);
    my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g", i, xctx->text[i].x0, xctx->text[i].y0);
    statusmsg(str,1);
  }
  xctx->text[i].sel = select_mode;

  #if HAS_CAIRO==1
  customfont = set_text_custom_font(&xctx->text[i]);
  #endif
  if(select_mode)
    draw_temp_string(xctx->gc[SELLAYER],ADD, xctx->text[i].txt_ptr,
     xctx->text[i].rot, xctx->text[i].flip, xctx->text[i].hcenter, xctx->text[i].vcenter,
     xctx->text[i].x0, xctx->text[i].y0,
     xctx->text[i].xscale, xctx->text[i].yscale);
  else
    draw_temp_string(xctx->gctiled,NOW, xctx->text[i].txt_ptr,
     xctx->text[i].rot, xctx->text[i].flip, xctx->text[i].hcenter, xctx->text[i].vcenter,
     xctx->text[i].x0, xctx->text[i].y0,
     xctx->text[i].xscale, xctx->text[i].yscale);
  #if HAS_CAIRO==1
  if(customfont) cairo_restore(xctx->cairo_ctx);
  #endif
  xctx->need_reb_sel_arr=1;
}

void select_box(int c, int i, unsigned short select_mode, int fast)
{
  char str[1024];       /* overflow safe */
  char s[256];          /* overflow safe */
  if(!fast)
  {
   my_strncpy(s,xctx->rect[c][i].prop_ptr!=NULL?xctx->rect[c][i].prop_ptr:"<NULL>",S(s));
   my_snprintf(str, S(str), "selected box : layer=%d, n=%d properties: %s",c-4,i,s);
   statusmsg(str,2);

   my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g  w = %.16g h = %.16g",
      i, xctx->rect[c][i].x1, xctx->rect[c][i].y1,
      xctx->rect[c][i].x2-xctx->rect[c][i].x1, xctx->rect[c][i].y2-xctx->rect[c][i].y1
   );
   statusmsg(str,1);
  }
  if(select_mode) {
    if(select_mode==SELECTED) {
      xctx->rect[c][i].sel = select_mode;
    } else {
      xctx->rect[c][i].sel |= select_mode;
    }
    drawtemprect(xctx->gc[SELLAYER], ADD, xctx->rect[c][i].x1, xctx->rect[c][i].y1,
                                    xctx->rect[c][i].x2, xctx->rect[c][i].y2);
  } else {
    xctx->rect[c][i].sel = 0;
    drawtemprect(xctx->gctiled, NOW, xctx->rect[c][i].x1, xctx->rect[c][i].y1,
                               xctx->rect[c][i].x2, xctx->rect[c][i].y2);
  }

  if( xctx->rect[c][i].sel == (SELECTED1|SELECTED2|SELECTED3|SELECTED4)) xctx->rect[c][i].sel = SELECTED;

  xctx->need_reb_sel_arr=1;
}



void select_arc(int c, int i, unsigned short select_mode, int fast)
{
  char str[1024];   /* overflow safe */
  char s[256];    /* overflow safe */
  if(!fast)
  {
   my_strncpy(s,xctx->rect[c][i].prop_ptr!=NULL?xctx->rect[c][i].prop_ptr:"<NULL>",S(s));
   my_snprintf(str, S(str), "selected arc : layer=%d, n=%d properties: %s",c-4,i,s);
   statusmsg(str,2);

   my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g  r = %.16g a = %.16g b = %.16g",
      i, xctx->arc[c][i].x, xctx->arc[c][i].y, xctx->arc[c][i].r, xctx->arc[c][i].a, xctx->arc[c][i].b);
   statusmsg(str,1);
  }
  if(select_mode) {
    xctx->arc[c][i].sel = select_mode;
    drawtemparc(xctx->gc[SELLAYER], ADD, xctx->arc[c][i].x, xctx->arc[c][i].y,
                                   xctx->arc[c][i].r, xctx->arc[c][i].a, xctx->arc[c][i].b);
  } else {
    xctx->arc[c][i].sel = 0;
    drawtemparc(xctx->gctiled, NOW, xctx->arc[c][i].x, xctx->arc[c][i].y,
                              xctx->arc[c][i].r, xctx->arc[c][i].a, xctx->arc[c][i].b);
  }

  /*if( xctx->arc[c][i].sel == (SELECTED1|SELECTED2|SELECTED3|SELECTED4)) xctx->arc[c][i].sel = SELECTED; */

  xctx->need_reb_sel_arr=1;
}

void select_polygon(int c, int i, unsigned short select_mode, int fast )
{
  char str[1024];       /* overflow safe */
  char s[256];          /* overflow safe */
  if(!fast)
  {
   my_strncpy(s,xctx->poly[c][i].prop_ptr!=NULL?xctx->poly[c][i].prop_ptr:"<NULL>",S(s));
   my_snprintf(str, S(str), "selected polygon: layer=%d, n=%d properties: %s",c-4,i,s);
   statusmsg(str,2);

   my_snprintf(str, S(str), "n=%4d x0 = %.16g  y0 = %.16g ...", i, xctx->poly[c][i].x[0], xctx->poly[c][i].y[0]);
   statusmsg(str,1);
  }
  xctx->poly[c][i].sel = select_mode;
  if(select_mode) {
   drawtemppolygon(xctx->gc[SELLAYER], NOW, xctx->poly[c][i].x, xctx->poly[c][i].y, xctx->poly[c][i].points);
  }
  else
   drawtemppolygon(xctx->gctiled, NOW, xctx->poly[c][i].x, xctx->poly[c][i].y, xctx->poly[c][i].points);
  xctx->need_reb_sel_arr=1;
}

void select_line(int c, int i, unsigned short select_mode, int fast )
{
  char str[1024];       /* overflow safe */
  char s[256];          /* overflow safe */
  if(!fast)
  {
   my_strncpy(s,xctx->line[c][i].prop_ptr!=NULL?xctx->line[c][i].prop_ptr:"<NULL>",S(s));
   my_snprintf(str, S(str), "selected line: layer=%d, n=%d properties: %s",c-4,i,s);
   statusmsg(str,2);

   my_snprintf(str, S(str), "n=%4d x = %.16g  y = %.16g  w = %.16g h = %.16g",
      i, xctx->line[c][i].x1, xctx->line[c][i].y1,
      xctx->line[c][i].x2-xctx->line[c][i].x1, xctx->line[c][i].y2-xctx->line[c][i].y1
   );
   statusmsg(str,1);
  }
  if( ((xctx->line[c][i].sel|select_mode) == (SELECTED1|SELECTED2)) ||
      ((xctx->line[c][i].sel == SELECTED) && select_mode) )
   xctx->line[c][i].sel = SELECTED;
  else
   xctx->line[c][i].sel = select_mode;
  if(select_mode) {
   if(xctx->line[c][i].bus)
     drawtempline(xctx->gc[SELLAYER], THICK, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                       xctx->line[c][i].x2, xctx->line[c][i].y2);
   else
     drawtempline(xctx->gc[SELLAYER], ADD, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                     xctx->line[c][i].x2, xctx->line[c][i].y2);
  }
  else
   if(xctx->line[c][i].bus)
     drawtempline(xctx->gctiled, THICK, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                  xctx->line[c][i].x2, xctx->line[c][i].y2);
   else
     drawtempline(xctx->gctiled, NOW, xctx->line[c][i].x1, xctx->line[c][i].y1,
                                xctx->line[c][i].x2, xctx->line[c][i].y2);
  xctx->need_reb_sel_arr=1;
}

/* 20160503 return type field */
unsigned short select_object(double mx,double my, unsigned short select_mode, int override_lock)
{
   Selected sel;
   sel = find_closest_obj(mx, my);

   dbg(1, "select_object(): sel.n=%d, sel.col=%d, sel.type=%d\n", sel.n, sel.col, sel.type);

   switch(sel.type)
   {
    case WIRE:
     select_wire(sel.n, select_mode, 0);
     break;
    case xTEXT:
     select_text(sel.n, select_mode, 0);
     break;
    case LINE:
     select_line(sel.col, sel.n, select_mode,0);
     break;
    case POLYGON:
     select_polygon(sel.col, sel.n, select_mode,0);
     break;
    case xRECT:
     select_box(sel.col,sel.n, select_mode,0);
     break;
    case ARC:
     select_arc(sel.col,sel.n, select_mode,0);
     break;
    case ELEMENT:
     select_element(sel.n,select_mode,0, override_lock);
     break;
    default:
     break;
   } /*end switch */

   drawtemparc(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0, 0.0);
   drawtemprect(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);
   drawtempline(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);

   if(sel.type)  xctx->ui_state |= SELECTION;
   return sel.type;
}

void select_inside(double x1,double y1, double x2, double y2, int sel) /*added unselect (sel param) */
{
 int c,i, tmpint;
 double x, y, r, a, b, xa, ya, xb, yb; /* arc */
 double xx1,yy1,xx2,yy2;
 xRect tmp;
 int en_s;
 int select_rot = 0, select_flip = 0;
 #if HAS_CAIRO==1
 int customfont;
 #endif

 en_s = tclgetboolvar("enable_stretch");
 for(i=0;i<xctx->wires;i++)
 {
  if(RECTINSIDE(xctx->wire[i].x1,xctx->wire[i].y1,xctx->wire[i].x2,xctx->wire[i].y2, x1,y1,x2,y2))
  {
   xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
   sel ? select_wire(i,SELECTED, 1): select_wire(i,0, 1);
  }
  else if( sel && en_s && POINTINSIDE(xctx->wire[i].x1,xctx->wire[i].y1, x1,y1,x2,y2) )
  {
   xctx->ui_state |= SELECTION;
   select_wire(i,SELECTED1, 1);
  }
  else if( sel && en_s && POINTINSIDE(xctx->wire[i].x2,xctx->wire[i].y2, x1,y1,x2,y2) )
  {
   xctx->ui_state |= SELECTION;
   select_wire(i,SELECTED2, 1);
  }
 }
 for(i=0;i<xctx->texts;i++)
 {
  select_rot = xctx->text[i].rot;
  select_flip = xctx->text[i].flip;
  #if HAS_CAIRO==1
  customfont = set_text_custom_font(&xctx->text[i]);
  #endif
  text_bbox(xctx->text[i].txt_ptr,
             xctx->text[i].xscale, xctx->text[i].yscale, select_rot, select_flip, 
             xctx->text[i].hcenter, xctx->text[i].vcenter,
             xctx->text[i].x0, xctx->text[i].y0,
             &xx1,&yy1, &xx2,&yy2, &tmpint, &tmpint);
  #if HAS_CAIRO==1
  if(customfont) cairo_restore(xctx->cairo_ctx);
  #endif
  if(RECTINSIDE(xx1,yy1, xx2, yy2,x1,y1,x2,y2))
  {
   xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
   sel ? select_text(i, SELECTED, 1): select_text(i, 0, 1);
  }
 }
 for(i=0;i<xctx->instances;i++)
 {
  if(RECTINSIDE(xctx->inst[i].xx1, xctx->inst[i].yy1, xctx->inst[i].xx2, xctx->inst[i].yy2, x1,y1,x2,y2))
  {
   xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
   sel ? select_element(i,SELECTED,1, 0): select_element(i,0,1, 0);
  }
 }
 for(c=0;c<cadlayers;c++)
 {
  if(!xctx->enable_layer[c]) continue;
  for(i=0;i<xctx->polygons[c]; i++) {
    int k, selected_points, flag;

    polygon_bbox(xctx->poly[c][i].x, xctx->poly[c][i].y, xctx->poly[c][i].points, &xa, &ya, &xb, &yb);
    if(OUTSIDE(xa, ya, xb, yb, x1, y1, x2, y2)) continue;
    selected_points = 0;
    flag=0;
    for(k=0; k<xctx->poly[c][i].points; k++) {
      if(xctx->poly[c][i].sel==SELECTED) xctx->poly[c][i].selected_point[k] = 1;
      if( POINTINSIDE(xctx->poly[c][i].x[k],xctx->poly[c][i].y[k], x1,y1,x2,y2)) {
        flag=1;
        xctx->poly[c][i].selected_point[k] = sel;
      }
      if(xctx->poly[c][i].selected_point[k]) selected_points++;
    }
    if(flag) {
      if(selected_points==0) {
        select_polygon(c, i, 0, 1);
      }
      if(selected_points==xctx->poly[c][i].points) {
        xctx->ui_state |= SELECTION;
        select_polygon(c, i, SELECTED, 1);
      } else if(selected_points) {
        /* for polygon, SELECTED1 means partial sel */
        if(sel && en_s) select_polygon(c, i, SELECTED1,1);
      }
    }

  }
  for(i=0;i<xctx->lines[c];i++)
  {
   if(RECTINSIDE(xctx->line[c][i].x1,xctx->line[c][i].y1,xctx->line[c][i].x2,xctx->line[c][i].y2, x1,y1,x2,y2))
   {
    xctx->ui_state |= SELECTION;
    sel? select_line(c,i,SELECTED,1): select_line(c,i,0,1);
   }
   else if( sel && en_s && POINTINSIDE(xctx->line[c][i].x1,xctx->line[c][i].y1, x1,y1,x2,y2) )
   {
    xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
    select_line(c, i,SELECTED1,1);
   }
   else if( sel && en_s && POINTINSIDE(xctx->line[c][i].x2,xctx->line[c][i].y2, x1,y1,x2,y2) )
   {
    xctx->ui_state |= SELECTION;
    select_line(c, i,SELECTED2,1);
   }
  }
  for(i=0;i<xctx->arcs[c];i++) {
    x = xctx->arc[c][i].x;
    y = xctx->arc[c][i].y;
    a = xctx->arc[c][i].a;
    b = xctx->arc[c][i].b;
    r = xctx->arc[c][i].r;
    xa = x + r * cos(a * XSCH_PI/180.);
    ya = y - r * sin(a * XSCH_PI/180.);
    xb = x + r * cos((a+b) * XSCH_PI/180.);
    yb = y - r * sin((a+b) * XSCH_PI/180.);
    arc_bbox(x, y, r, a, b, &tmp.x1, &tmp.y1, &tmp.x2, &tmp.y2);
    if(RECTINSIDE(tmp.x1, tmp.y1, tmp.x2, tmp.y2, x1,y1,x2,y2)) {
      xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
      sel? select_arc(c, i, SELECTED,1): select_arc(c, i, 0,1);
    }
    else if( sel && en_s && POINTINSIDE(x, y, x1, y1, x2, y2) )
    {
     xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
     select_arc(c, i,SELECTED1,1);
    }
    else if( sel && en_s && POINTINSIDE(xb, yb, x1, y1, x2, y2) )
    {
     xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
     select_arc(c, i,SELECTED3,1);
    }
    else if( sel && en_s && POINTINSIDE(xa, ya, x1, y1, x2, y2) )
    {
     xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
     select_arc(c, i,SELECTED2,1);
    }
  }
  for(i=0;i<xctx->rects[c];i++)
  {
   if(RECTINSIDE(xctx->rect[c][i].x1,xctx->rect[c][i].y1,xctx->rect[c][i].x2,xctx->rect[c][i].y2, x1,y1,x2,y2))
   {
    xctx->ui_state |= SELECTION; /* set xctx->ui_state to SELECTION also if unselecting by area ???? */
    sel? select_box(c,i, SELECTED, 1): select_box(c,i, 0, 1);
   }
   else {
     if( sel && en_s && POINTINSIDE(xctx->rect[c][i].x1,xctx->rect[c][i].y1, x1,y1,x2,y2) )
     {                                  /*20070302 added stretch select */
      xctx->ui_state |= SELECTION;
      select_box(c, i,SELECTED1,1);
     }
     if( sel && en_s && POINTINSIDE(xctx->rect[c][i].x2,xctx->rect[c][i].y1, x1,y1,x2,y2) )
     {
      xctx->ui_state |= SELECTION;
      select_box(c, i,SELECTED2,1);
     }
     if( sel && en_s && POINTINSIDE(xctx->rect[c][i].x1,xctx->rect[c][i].y2, x1,y1,x2,y2) )
     {
      xctx->ui_state |= SELECTION;
      select_box(c, i,SELECTED3,1);
     }
     if( sel && en_s && POINTINSIDE(xctx->rect[c][i].x2,xctx->rect[c][i].y2, x1,y1,x2,y2) )
     {
      xctx->ui_state |= SELECTION;
      select_box(c, i,SELECTED4,1);
     }
   }

  } /* end for i */
 } /* end for c */
 drawtemparc(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0, 0.0);
 drawtemprect(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);
 drawtempline(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);
}

void select_all(void)
{
 int c,i;

 for(i=0;i<xctx->wires;i++)
 {
   select_wire(i,SELECTED, 1);
 }
 for(i=0;i<xctx->texts;i++)
 {
   select_text(i, SELECTED, 1);
 }
 for(i=0;i<xctx->instances;i++)
 {
   select_element(i,SELECTED,1, 0);
 }
 for(c=0;c<cadlayers;c++)
 {
  for(i=0;i<xctx->polygons[c];i++)
  {
    select_polygon(c,i,SELECTED,1);
  }
  for(i=0;i<xctx->lines[c];i++)
  {
    select_line(c,i,SELECTED,1);
  }
  for(i=0;i<xctx->arcs[c];i++)
  {
    select_arc(c,i, SELECTED, 1);
  }
  for(i=0;i<xctx->rects[c];i++)
  {
    select_box(c,i, SELECTED, 1);
  }
 } /* end for c */
 drawtemparc(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0, 0.0);
 drawtemprect(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);
 drawtempline(xctx->gc[SELLAYER], END, 0.0, 0.0, 0.0, 0.0);
 rebuild_selected_array(); /* sets or clears xctx->ui_state SELECTION flag */
}