46a0560927
display: std::endl -> \n
2025-08-26 17:51:31 +02:00
850c3d74e0
progressBar: added eol for each progressBar update when no STDOUT_FILENO
2025-08-26 17:49:01 +02:00
2580aed994
esp_usb_jtag: added support for https://github.com/espressif/esp-usb-bridge + small adjusts
2025-08-25 09:38:00 +02:00
c818641cae
main: list_boards: print 'Undefined' when fpga_part or cable_name is empty
2025-08-07 11:00:49 +02:00
bc864100ff
main: list_boards now displays fpga_part too
2025-08-07 09:53:28 +02:00
c51c53ee33
Add Altera Cyclone 10 LP 10CL080
2025-07-28 13:27:06 +02:00
a53aedb137
gowin: added (undocumented) sequence to be performed when CRC Error bit is set
2025-07-20 10:23:19 +02:00
388f0b4c90
spiFlashdb: added XTX XT25F32B-S chip
2025-07-20 09:32:12 +02:00
b99672b69e
board: added ULX4M (DFU)
2025-07-19 09:45:04 +02:00
3b932dc542
colognechip: Simplify number of jtag bypass bits
2025-07-09 16:13:18 +02:00
3b1a40b798
part.hpp: MAX10: only keep size+Single(S)/Dual-supply(D). Sort between single-supply and dual-supply
2025-07-04 07:28:05 +02:00
4bd9840e46
altera: fix Wc99-designator
2025-07-02 07:17:17 +02:00
b2aa12b582
spiFlash, spiFlashdb: added global_lock flag and uses it instead of jedec_id ( #566 )
2025-06-30 18:26:22 +02:00
a1ea0c98fc
cmsisDAP: Avoid memcpy() on possibly overlapping buffer
...
I observed strange cmsisDAP behavior when building openFPGALoader with
Clang/musl in release mode: CmsisDAP:display_info() shows the correct
hardware capability that supports JTAG,
...
firmware version : 0254
hardware capabilities : 13
SWO trace buffer size : NA
...
but the detection of JTAG fails in the constructor with a strange
response sequence,
Hardware cap 00 01 00
JTAG init failed with: JTAG is not supported by the probe
With some digging, it's found that the CmsisDAP::xfer() method without
an instruction parameter may be called by the constructor with a rx_buff
pointer overlapping with _ll_buffer, for which memmove() instead of
memcpy() should be used. The behavior of memcpy() is undefined when dst
and src overlap.
Fixes: 53c5d35da6
2025-06-28 11:53:25 +00:00
e3e93a394e
main: SPI mode without board: check file_size (must be > 0)
2025-06-25 19:21:46 +02:00
dd3204a6e0
main, board: added --pins argument compatible with SPI mode
2025-06-25 19:10:13 +02:00
319c08e841
latticeSSPI: uses registers struct for status
2025-06-19 09:51:44 +02:00
dede406ebc
latticeSSPI: ECP5 driver for Slave SPI mode
2025-06-19 08:34:29 +02:00
21d4fccf28
altera,libusb_ll,mcsParser: fix some compiler's warnings
2025-06-19 08:30:35 +02:00
803bdfecce
altera: MAX10: added --flash-sector support with arbitrary binary file
2025-06-18 18:57:26 +02:00
775477ba8e
part: added Lattice ECP3 LFE3-70E
2025-06-18 16:20:32 +02:00
a7b56c3732
lattice: added ECP3 family support (SRAM only)
2025-06-18 16:20:23 +02:00
098cdd466a
jtag: allows caller to specify tdi level in toggleClk method
2025-06-18 10:01:16 +02:00
3723bf7571
Add cable support for ARM-USB-TINY-H based off ARM-USB-OCD-H
2025-06-10 21:54:54 +02:00
347088efb4
ice40: Reuses prepare_flash_access/post_flash_access as much as possible. Removed dupplicated Flash dump informations. Be coherent to status message
2025-06-08 07:20:00 +02:00
2e1c7e29a4
spiFlash: cosmetic 'Read flash ' -> 'Reading' ( #558 )
2025-06-08 07:01:14 +02:00
765ed526e3
spiFlash: dump: honour _verbose level
2025-06-04 21:38:00 +02:00
32f744979c
ice40: uses verbose_level for SPIFlash instead of verbose/quiet ( #555 )
2025-06-03 11:26:38 +02:00
c6d4a8bff1
device: added verbose_level attribute
2025-06-03 11:24:36 +02:00
5f6c1bfcd4
Merge pull request #543 from trabucayre/spiOverJtag_v2
...
SpiOverJtag v2
2025-05-29 08:41:10 +02:00
03045dc407
xilinx: adapted code to support existing spiOverJtag bitstreams (v1) and new bitstreams (v2)
2025-05-26 09:53:10 +02:00
ba48d53409
main: added detect_flash in SPI Mode and with a manufacturer
2025-05-24 07:50:51 +02:00
e135f1820b
ice40: added detect_flash support
2025-05-24 07:48:21 +02:00
10ba59c1ec
libusb_ll,ftdipp_mpsse: Bus and Device must be both == 0 to use filter or uses VID/PID
2025-05-24 07:46:58 +02:00
6c4dbe94cc
Merge pull request #553 from cheyao/master
...
Add support for icepi zero
2025-05-23 07:27:18 +02:00
7c423c15fd
Add icepi zero to board.hpp
2025-05-23 07:02:44 +02:00
5fefbb39af
Add support for MILIANKE-S200-EG4D20 and update document
...
Add board definition and FPGA part ID for the MILIANKE S200 EG4D20
development board. Also update related documentation and outdated URL.
Tested ok by loading bitstream to SRAM and FLASH.
Signed-off-by: Junhui Liu <junhui.liu@pigmoral.tech>
2025-05-22 11:05:51 +08:00
951db00617
anlogicCable: Fix wrong ANLOGICCABLE_VIDv1
...
ANLOGICCABLE_VIDv1 should keep the old ANLOGICCABLE_VID to compatible
with the original device.
Fixes: 4b008a0
2025-05-22 10:37:04 +08:00
e18c139941
spiFlashdb.hpp: disables quad mode configuration for all N25Q. It's useless because the chip is able by default to support single and quad transaction and after this configuration the flash is unable to works in single mode.
2025-05-21 10:17:10 +02:00
e6ee4fb99a
libusb_ll: probe type -> probe_type
2025-05-15 18:18:49 +02:00
392b4c61ee
libusb_ll/scan: improved display by align column according to max size ( #549 )
2025-05-15 08:09:25 +02:00
c291aade70
Adding support for Open Source SDR Lab Kintex-7 325t FPGA PCIE Development Board
2025-05-12 12:38:30 -03:00
4553bacb05
colognechip: performs reset after SPI Flash write
2025-05-01 16:19:05 +02:00
f6afb5ab9f
Add support for Digilent Anvyl, the Big Red Board.
...
Programming to SRAM works. Programming flash works with a renamed
spiOverJtag bitfile - cs(g)484 is different from fg(g)484, but the
configuration flash IOs all end up on the same pads in the end.
2025-04-26 23:49:24 -07:00
7a509b56ee
Merge pull request #541 from bl0x/numato-neso-support
...
Add support for Numatolab Neso board.
2025-04-24 06:59:25 +02:00
ff1e77debf
adds GCM board type and FT4232H interface B cable
2025-04-23 07:04:40 -06:00
d942c79f62
jtag: added method to retrieves number of devices in the JTAG chain
2025-04-22 18:59:19 +02:00
bdeb74b61e
Add support for Numatolab Neso board. Programming SRAM over USB works, when board jumpers are set for JTAG programming mode. SPI flashing does not work properly (does not boot).
2025-04-21 21:17:54 +02:00
198cfbe604
ihexParser: added type 04 (Extented Linear Address Record) and 05 (Start Linear Address Record)
2025-04-21 17:47:02 +02:00
c97369c241
spiFlash: only uses spi_put with distinct cmd parameter
2025-04-21 07:42:26 +02:00
Gwenhael Goavec-Merou
Denis Bodor
Patrick Urban
Yao Zi
José Miguel Sánchez García
Gwenhael Goavec-Merou
Cyao
Junhui Liu
Julio Nunes Avelar
Dusk
Mike Goelzer
Bastian Löher