6c48657896
Make status report (MS Windows only) a little smarter.
2023-07-31 14:27:13 +02:00
fe3222a118
Add an option nginfo to enable a status report during simulation
...
(currently available only with MS Windows GUI version).
2023-07-31 14:26:40 +02:00
c66f9faaab
Remove compiler warnings (VS2022)
2023-07-31 14:26:23 +02:00
b79eca646b
Prevent crashes in udevices.c when malformed U* instances are present. This would happen with incorrectly written U* gates, ff, latches which do not conform to the PSpice specs. Instead, ERROR messages are output which, hopefully, will help a user to debug their subckt.
2023-07-31 14:26:01 +02:00
480e269102
Allow netlist lines to grow during parameter substitution,
...
removing a 25-character limit on the size of string parameters.
2023-07-31 14:25:51 +02:00
576f218945
Fix the NAND and NOR variants of XSPICE code model multi_input_pwl
...
and add an example of its use with the E-source NAND variant.
2023-07-31 14:25:40 +02:00
3a260fd4d9
Fix Bug 584 - "XSPICE dac_bridge model shows incorrect output timing."
...
Remove reliance on exact breakpoint timing and tidy code.
2023-07-31 14:25:31 +02:00
bc41e48126
Change message from Circuit2 to Parse
2023-07-31 14:25:23 +02:00
4246b31126
Revert "Marcel Hendrix's fix for Bug #324 -"
...
This reverts commit d3a8634afe
2023-07-30 16:01:15 +02:00
f548e8400a
eprvcd [-a] [-t timescale] node node ...
...
timescale is now given by minimum 1fs, maximum 1s.
2023-07-30 14:44:07 +02:00
7e91a23804
Remove vs2022 linker warning (ctx potentially uninitialized)
2023-07-30 08:40:57 +02:00
b6585c8e14
replace exp10() by pow(10, ...),
...
exp10 not available in VS2022
2023-07-30 08:39:47 +02:00
2e3af2658a
fopen_with_path enable path search (directory of recent inputs or
...
NGSPICE_INPUT_DIR)
2023-07-30 08:37:55 +02:00
c61543a4f3
Fix Bug #629 - "XSPICE d_osc failures". The old code has been completely
...
replaced by a new design that is faster, more reliable and does not
usually insert analog breakpoints.
2023-07-29 09:41:13 +01:00
54b8171c53
Add code in ivars.c to look for a SPICE_ROOT environment variable
...
that gives the location of the ngspice installation. That allows
binaries to be installed in a different directory to the one
compiled in. The spinit startup file is made location-independent
by passing a variable giving the location of loadable modules,
so this fixes Bug #615 -
"spinit contains arch dependent paths, but is installed as noarch DATA".
2023-07-29 09:37:57 +01:00
bead3e3249
Add an option for parameters to the xfer code model to be provided
...
in a Touchstone-format file instead of as a model parameter.
The change to mif_inp2.c allows the "table" parameter to be omitted.
2023-07-29 09:34:12 +01:00
d3a8634afe
Marcel Hendrix's fix for Bug #324 -
...
Difference between file and line input for '];'
2023-07-29 09:30:51 +01:00
e9386155a6
Add support for including analog node changes in VCD file output,
...
and an option to explicitly set the VCD timestep. Correct the
output value for high-impedance nodes.
2023-07-29 09:16:01 +01:00
c9548c10c9
Prevent crash when number of parameter dependencies increases beyond
...
limit. Raise the limit from 100 to 200.
2023-07-25 15:18:02 +02:00
a5535d18d0
re-enable rcheck debug output with WINGUI
2023-07-25 15:16:33 +02:00
d1187e9a34
Add variable "csnumprec" to allow setting the precision of vectors
...
and variables as arguments to functions listet in manual chapter 17.5.
Default is 6, as has been standard up to now.
2023-07-24 14:18:05 +02:00
9a6d950159
Make status report (MS Windows only) a little smarter.
2023-07-22 17:10:30 +02:00
7027a49663
Add an option nginfo to enable a status report during simulation
...
(currently available only with MS Windows GUI version).
2023-07-22 16:03:34 +02:00
f46f481942
Remove compiler warnings (VS2022)
2023-07-22 10:30:37 +02:00
752c4936c0
Prevent crashes in udevices.c when malformed U* instances are present. This would happen with incorrectly written U* gates, ff, latches which do not conform to the PSpice specs. Instead, ERROR messages are output which, hopefully, will help a user to debug their subckt.
2023-07-22 10:19:27 +02:00
3f3c4dc6aa
Allow netlist lines to grow during parameter substitution,
...
removing a 25-character limit on the size of string parameters.
2023-07-21 08:47:10 +02:00
1876e59aaf
Fix the NAND and NOR variants of XSPICE code model multi_input_pwl
...
and add an example of its use with the E-source NAND variant.
2023-07-21 08:47:04 +02:00
53b1bf1800
Fix Bug 584 - "XSPICE dac_bridge model shows incorrect output timing."
...
Remove reliance on exact breakpoint timing and tidy code.
2023-07-21 08:46:54 +02:00
ef38b54d3c
Change message from Circuit2 to Parse
2023-07-21 08:40:26 +02:00
4d8b105b86
Simplify expression nesting depth.
2023-07-15 11:34:09 +02:00
251f1e1984
The channel data needs to be freed for some 2D Cider devices. This shows up with some of the examples/cider/parallel circuits.
2023-07-15 11:33:52 +02:00
d74e43f0f0
Move extern declaration to the top, out of any function.
...
Thus remove VC2022 compiler warnings.
2023-07-15 11:33:11 +02:00
159e185bfe
Tidy up sp_shutdown with Cider.
2023-07-15 11:32:52 +02:00
51b361bbf0
When Cider models are present, a normal batch mode sp_shutdown (for example, ngspice -b cmosinv.cir) will call com_quit(NULL). This cleans up so that valgrind will find no leaks in Cider devices after sp_shutdown. To disable this feature, set the environment variable CIDER_COM_QUIT="OFF". Even though it really does not matter that Cider memory is cleared just before exit, it makes it cleaner for valgrind checks.
2023-07-15 11:32:37 +02:00
ba2842b55a
Prevent a crash if p==NULL (due to buggy input)
2023-07-15 11:32:26 +02:00
794a37339a
ifft: in case input array is smaller then output array - fill in the rest with zero to prevent uninitialzed plot variables
2023-07-15 11:32:11 +02:00
42b803e5c2
same array size for in- and output in inverse fft function from fftw3
2023-07-15 11:31:59 +02:00
25c1c971e5
Fix the Cider memory leaks from setupContacts. TWOdestroy needed to free the contact nodes.
2023-07-15 11:31:48 +02:00
f39f89ea9b
Add DEVmodDelete functions to reduce memoory leaks in Cider models. The model memory was not freed during remcirc or quit. In the future, some of the code duplication could be refactored. The cmosinv.cir is now down to just 1 memory leak.
2023-07-15 11:31:38 +02:00
db8ac72199
The CONTACT statement does not apply to 1D devices.
2023-07-15 11:31:24 +02:00
844ea11a63
Fix some more memory leaks in the CIDER 1D and 2D destroy functions.
2023-07-15 11:31:14 +02:00
a60b7f5630
Fix sluggish output of the "Reference value" progress indicator on Linux
...
after it switched from stderr to stdout (28a3413
2023-07-15 11:31:03 +02:00
ac6487932b
Make the returned status of the "shell" command available as interpreter
...
variable "shellstatus". Also change the default shell to /bin/sh
as csh is now rare.
2023-07-15 11:30:48 +02:00
1c1a53bac8
Set default colours for the button box in the X11 plot window that
...
match the default dark background of the plot.
2023-07-15 11:30:29 +02:00
80e44a32d6
Add missing FREE to reduce some of the Cider memory leaks.
2023-07-15 11:30:02 +02:00
5f6a6a27d8
Further fix for PWL bugs introduced by 9c71db3 (Fix for Bug #607 ) and
...
partially fixed by 79c69e09c75367#468 -
"Bugs in src/spicelib/devices/vsrc/vsrcacct.c for PWL source."
2023-07-15 11:29:51 +02:00
5114d6c2f4
Add an option to the iplot command: -d sets the number of simulation
...
steps before the window is shown. The value can be chosen to
limit rapid resizing when starting and that is used in the PLL examples.
2023-07-15 11:29:32 +02:00
e5a931e537
Improve commands for vector scales. "setscale" can now change
...
or clear the scale of an individual vector and "compose" can
explicitly create a vector from XSPICE event node history.
2023-07-15 11:28:48 +02:00
d3dccc68b2
Error print output consistenly only to stderr.
...
Replace out_printf by fprint(stderr, ...
2023-07-15 11:28:25 +02:00
87f0db6f50
Prevent crash when ControlledExit* is not initialized
...
in ngspice shared library.
2023-07-15 11:28:07 +02:00
b0f2ab8764
Fix bug 637
...
Prevent crash when external current source is used.
2023-07-15 11:27:43 +02:00
90d8f7f34f
Prevent crash if EXTERNAL voltage source is used
...
Fixes
98763c0ad
2023-07-15 11:27:32 +02:00
4421d95379
improve comment
2023-07-15 11:27:14 +02:00
a28784d6d7
Prevent crash if *line == NULL
2023-07-15 11:26:52 +02:00
53b72a7693
Skip title line when resorting .params, .meas, .temp
2023-07-15 11:25:27 +02:00
762b131bb3
Fix Bug #635 - "Starting ngspice with HOME env variable unset causes segfault".
2023-07-15 11:22:13 +02:00
eda9cadbed
The 'plot' command is not available in batch mode.
...
Issue a warning and ignore it.
2023-07-15 11:22:00 +02:00
0e6b785728
Remove the error message when a simulation has been started via the .control section.
2023-07-15 11:21:40 +02:00
f5091bdc2d
Make the error message a little more reasonable.
...
Unfortunately the current setup does not easily allow naming
the offending command.
2023-07-15 11:21:11 +02:00
c7ebb7aabb
Error message up to now was strictly for command line interactive use only.
...
Improve error message when parsing .ac lines.
2023-07-15 11:20:41 +02:00
d46cd894cc
Prevent crash if s == NULL
2023-07-15 11:20:09 +02:00
7f8e1cecab
Allow ';' also at the beginning of a line.
2023-07-15 11:19:57 +02:00
c1db561373
No syntax check for title line
2023-07-15 11:19:31 +02:00
0c1f114dea
add comment
2023-07-15 11:19:03 +02:00
cb9cc7140d
Prevent crash if no or not enough coeffs are given.
...
r is then probably not the repeat coefficient.
2023-07-15 11:18:36 +02:00
3420e66705
During syntax check: v,i sources need two nodes,
...
and prevent crash upon buggy ac input.
2023-07-15 11:18:09 +02:00
29c51c0d30
Bail out if {...} or '...' are missing around RHS of the equation.
...
(...) may be possible, elsewhere additional {} are put around,
so we have {(...)}.
2023-07-15 11:17:34 +02:00
0ee5e3f32a
Add a control language function cvector, to create a complex vector.
...
Let vec1 = cvector(50)
will generate a complex vector, with the real part values
increasing from 0 to 49, the imaginary values are set to 0.
Useful in ac loops to store result data.
2023-07-15 11:17:10 +02:00
01e8b4da84
Prevent crash upon buggy user input (missing ] or >)
2023-07-15 11:16:57 +02:00
1340002c05
Improve error message
2023-07-15 11:16:43 +02:00
fc169fe23f
CIDER: Plug some memory leak
2023-07-15 11:16:22 +02:00
67b2ddbad5
CIDER: Plug some memory leaks by adding to TWOdestroy()
2023-07-15 11:16:13 +02:00
3bb9cd738f
CIDER: Plug small memory leaks in INPparseNumMod()
2023-07-15 11:16:01 +02:00
695c1e1bd6
Add an extra model stitching for CIDER only.
...
This one fills in actualLine, which is use by
parsing the CIDER model parameters in INPparseNumMod()
from inpgmod.c
2023-07-15 11:15:50 +02:00
d31568bd83
Add parsing and translation of the FREQ form of E-source devices,
...
integrated with the existing parsing of AND/NAND/OR/NOR forms (inpcom.c).
For the implementation, add a new analog XSPICE code model, xfer.
Add an example to examples/sp.
2023-07-15 11:15:08 +02:00
1fdf7dac51
Fix Bug #623 - "Parser warning for voltage source".
...
Do not warn when a single-element vector lacks parentheses.
2023-07-15 11:14:57 +02:00
422a205409
Always propgate any individual scale for a vector that appears
...
in an expression, resolving conflicts by matching length and warning
only when making an arbitary choice. One effect of this is that it
is now possible to mix analog nodes with offset digital nodes
(an expression like dvalue+6) without a warning and get a correct plot.
2023-07-15 11:14:35 +02:00
eeb912228a
When creating a plot vector from XSPICE event history, add a
...
final point at the end of the vector, so that a plotted line
does not end at the last event, leaving an odd spike.
2023-07-15 11:13:19 +02:00
2db6b529f2
Fix Bug #630 - "pwl if r=last time, simulation never ends".
...
Allowing a PWL repeat to start at the last time-point makes no sense.
2023-07-15 11:13:05 +02:00
f4f2f41940
Fix another error in 9c71db3a72.
2023-07-15 11:12:52 +02:00
9099a922fd
Apply a patch from Aleksey Morozov to fix a bug that he identified
...
and reproduced. It is the same as Bug #331 -
"XSpice skips digital output point" except that it applies to the
instance queue, not the event queue.
2023-07-15 11:12:31 +02:00
ee7bcac256
Reduce excessive use of TREALLOC
2023-07-15 11:12:10 +02:00
50b9a55392
Simplify expression nesting depth.
2023-07-11 09:48:16 +02:00
1e58692e6d
The channel data needs to be freed for some 2D Cider devices. This shows up with some of the examples/cider/parallel circuits.
2023-07-11 09:48:10 +02:00
c6edbe44db
Move extern declaration to the top, out of any function.
...
Thus remove VC2022 compiler warnings.
2023-07-04 12:07:41 +02:00
f3b83fd4e4
Tidy up sp_shutdown with Cider.
2023-07-04 11:46:40 +02:00
b63f6e7905
When Cider models are present, a normal batch mode sp_shutdown (for example, ngspice -b cmosinv.cir) will call com_quit(NULL). This cleans up so that valgrind will find no leaks in Cider devices after sp_shutdown. To disable this feature, set the environment variable CIDER_COM_QUIT="OFF". Even though it really does not matter that Cider memory is cleared just before exit, it makes it cleaner for valgrind checks.
2023-07-04 11:46:35 +02:00
486b74f728
Prevent a crash if p==NULL (due to buggy input)
2023-07-04 11:45:27 +02:00
4c4a9c78ec
ifft: in case input array is smaller then output array - fill in the rest with zero to prevent uninitialzed plot variables
2023-07-03 10:07:32 +02:00
e83fae11bc
same array size for in- and output in inverse fft function from fftw3
2023-07-02 16:16:51 +02:00
40a89b16e6
Fix the Cider memory leaks from setupContacts. TWOdestroy needed to free the contact nodes.
2023-06-30 11:03:53 +02:00
92dcb76251
Add DEVmodDelete functions to reduce memoory leaks in Cider models. The model memory was not freed during remcirc or quit. In the future, some of the code duplication could be refactored. The cmosinv.cir is now down to just 1 memory leak.
2023-06-30 11:03:42 +02:00
cbda9ab7b5
The CONTACT statement does not apply to 1D devices.
2023-06-25 21:25:26 +02:00
42a8bafd10
Fix some more memory leaks in the CIDER 1D and 2D destroy functions.
2023-06-25 21:24:57 +02:00
d4c4ac7937
Fix sluggish output of the "Reference value" progress indicator on Linux
...
after it switched from stderr to stdout (28a3413
2023-06-24 17:24:21 +02:00
b62c9b1ef3
Make the returned status of the "shell" command available as interpreter
...
variable "shellstatus". Also change the default shell to /bin/sh
as csh is now rare.
2023-06-24 17:24:15 +02:00
e0cc583669
Set default colours for the button box in the X11 plot window that
...
match the default dark background of the plot.
2023-06-24 17:24:09 +02:00
0f15c1ab96
Add missing FREE to reduce some of the Cider memory leaks.
2023-06-20 22:57:34 +02:00
22b5a859d0
Further fix for PWL bugs introduced by 9c71db3 (Fix for Bug #607 ) and
...
partially fixed by 79c69e09c75367#468 -
"Bugs in src/spicelib/devices/vsrc/vsrcacct.c for PWL source."
2023-06-20 20:01:51 +02:00
1a056f935c
Add an option to the iplot command: -d sets the number of simulation
...
steps before the window is shown. The value can be chosen to
limit rapid resizing when starting and that is used in the PLL examples.
2023-06-20 20:01:41 +02:00
8ce190e7d6
Improve commands for vector scales. "setscale" can now change
...
or clear the scale of an individual vector and "compose" can
explicitly create a vector from XSPICE event node history.
2023-06-20 20:01:31 +02:00
64cbf224b5
Error print output consistenly only to stderr.
...
Replace out_printf by fprint(stderr, ...
2023-06-20 19:56:55 +02:00
3fd7bd2183
Prevent crash when ControlledExit* is not initialized
...
in ngspice shared library.
2023-06-18 10:32:01 +02:00
8d9695d7d6
Fix bug 637
...
Prevent crash when external current source is used.
2023-06-18 10:29:43 +02:00
82796a6fa6
Prevent crash if EXTERNAL voltage source is used
...
Fixes
98763c0ad
2023-06-14 15:34:45 +02:00
5761b71ecd
improve comment
2023-06-13 20:06:27 +02:00
a244e023c4
Prevent crash if *line == NULL
2023-06-13 20:05:49 +02:00
818bd19798
Revert "Prevent crash if *line == NULL"
...
This reverts commit b72f9516ac
2023-06-13 20:02:27 +02:00
216e5cb58b
Skip title line when resorting .params, .meas, .temp
2023-06-13 19:57:19 +02:00
b72f9516ac
Prevent crash if *line == NULL
2023-06-13 19:56:07 +02:00
2740d9a79b
Fix Bug #635 - "Starting ngspice with HOME env variable unset causes segfault".
2023-06-13 19:54:49 +02:00
bda4a83dc6
Revert "Skip the title line when re-sorting parameters"
...
This reverts commit 72496da4c9
2023-06-12 23:20:46 +02:00
630e800bd6
The 'plot' command is not available in batch mode.
...
Issue a warning and ignore it.
2023-06-09 16:31:04 +02:00
28f641b318
Remove the error message when a simulation has been started via the .control section.
2023-06-09 16:10:37 +02:00
d76e7362e7
Make the error message a little more reasonable.
...
Unfortunately the current setup does not easily allow naming
the offending command.
2023-06-09 16:09:57 +02:00
cdf66fac6b
Error message up to now was strictly for command line interactive use only.
...
Improve error message when parsing .ac lines.
2023-06-09 14:45:43 +02:00
72496da4c9
Skip the title line when re-sorting parameters
...
and removing .meas statement.
2023-06-09 14:44:40 +02:00
bf1dfa0127
Prevent crash if s == NULL
2023-06-07 16:25:24 +02:00
5e73be130a
Allow ';' also at the beginning of a line.
2023-06-04 14:53:38 +02:00
a99caf504f
No syntax check for title line
2023-06-04 14:36:27 +02:00
1ff095321c
add comment
2023-06-04 14:36:03 +02:00
525d221325
Prevent crash if no or not enough coeffs are given.
...
r is then probably not the repeat coefficient.
2023-06-04 14:23:09 +02:00
6dc09e6592
During syntax check: v,i sources need two nodes,
...
and prevent crash upon buggy ac input.
2023-06-04 14:01:44 +02:00
1ddb1f58b4
Bail out if {...} or '...' are missing around RHS of the equation.
...
(...) may be possible, elsewhere additional {} are put around,
so we have {(...)}.
2023-06-04 10:36:21 +02:00
3a535f19db
Add a control language function cvector, to create a complex vector.
...
Let vec1 = cvector(50)
will generate a complex vector, with the real part values
increasing from 0 to 49, the imaginary values are set to 0.
Useful in ac loops to store result data.
2023-06-04 09:46:13 +02:00
10e86d72d3
Prevent crash upon buggy user input (missing ] or >)
2023-06-03 17:09:10 +02:00
a03369fc12
Improve error message
2023-06-03 15:48:06 +02:00
7de5fd276e
CIDER: Plug some memory leak
2023-06-02 22:30:27 +02:00
27173c9622
CIDER: Plug some memory leaks by adding to TWOdestroy()
2023-06-02 19:44:34 +02:00
5ba0177f21
CIDER: Plug small memory leaks in INPparseNumMod()
2023-06-02 19:43:47 +02:00
981c63f1ab
Add an extra model stitching for CIDER only.
...
This one fills in actualLine, which is use by
parsing the CIDER model parameters in INPparseNumMod()
from inpgmod.c
2023-06-02 15:31:28 +02:00
e61db1d2cd
Add parsing and translation of the FREQ form of E-source devices,
...
integrated with the existing parsing of AND/NAND/OR/NOR forms (inpcom.c).
For the implementation, add a new analog XSPICE code model, xfer.
Add an example to examples/sp.
2023-05-31 16:04:51 +02:00
37453db34d
Fix Bug #623 - "Parser warning for voltage source".
...
Do not warn when a single-element vector lacks parentheses.
2023-05-29 09:47:44 +01:00
94da54bcea
Always propgate any individual scale for a vector that appears
...
in an expression, resolving conflicts by matching length and warning
only when making an arbitary choice. One effect of this is that it
is now possible to mix analog nodes with offset digital nodes
(an expression like dvalue+6) without a warning and get a correct plot.
2023-05-29 09:47:27 +01:00
d55143edca
When creating a plot vector from XSPICE event history, add a
...
final point at the end of the vector, so that a plotted line
does not end at the last event, leaving an odd spike.
2023-05-29 09:47:03 +01:00
0616965a67
Fix Bug #630 - "pwl if r=last time, simulation never ends".
...
Allowing a PWL repeat to start at the last time-point makes no sense.
2023-05-29 09:19:18 +01:00
9c75367cfb
Fix another error in 9c71db3a72.
2023-05-29 09:19:18 +01:00
6c420525d0
Apply a patch from Aleksey Morozov to fix a bug that he identified
...
and reproduced. It is the same as Bug #331 -
"XSpice skips digital output point" except that it applies to the
instance queue, not the event queue.
2023-05-29 09:19:18 +01:00
1cd15e382e
Reduce excessive use of TREALLOC
2023-05-27 16:44:30 +02:00
a56b8b2190
Revert "Reduce excessive use of TREALLOC"
...
This reverts commit 6c64d463c8
2023-05-27 16:17:23 +02:00
fd24e5af7e
re-formatting the code
2023-05-27 10:50:14 +02:00
d295fe3ac6
Slightly improve error handling and warning message
2023-05-27 10:50:02 +02:00
823465ceb8
.csparam: Add some safeguarding against wrong input and crash,
...
allow multiple parameters in a .csparam row (like .param).
2023-05-27 10:49:53 +02:00
b24c613ce6
Safeguard against bad arguments (no crash upon NULL)
2023-05-27 10:49:19 +02:00
ba7ad783a8
safeguard against crash upon buggy input
2023-05-27 10:49:07 +02:00
c723e124d9
Make error message more verbose and useful
2023-05-27 10:48:57 +02:00
9b3146b1fb
Correct the warning message
2023-05-27 10:48:41 +02:00
e834c89313
Prevent a crash when number of nodes differs in subckt and X call.
2023-05-27 10:48:30 +02:00
8c9602574e
Improve error messages
2023-05-27 10:48:15 +02:00
6ea2882c3b
Plug a memory leak
2023-05-27 10:48:00 +02:00
96bebafac5
Enable history substitution of interactive commands only when variable 'histsubst' is set.
...
This feature is in conflict with ! (logic inversion)
in .control language logic expressions.
2023-05-27 10:47:27 +02:00
e5d1885e39
make accessible
2023-05-27 10:47:11 +02:00
45015f974d
Add a "-w" option to the iplot command. It sets a width for the
...
window (in the current scale units) so that it does not re-scale
on overflow, but instead plots recently-generated data on a fixed scale.
2023-05-27 10:46:45 +02:00
7a5514a1ff
In graf.c change local function set() to do what you might expect,
...
rather than the opposite. Also fix a debug message.
2023-05-27 10:46:24 +02:00
1a97e1097f
Fix error in previous fix for Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Non-periodic PWL waveforms reverted to zero on termination.
2023-05-27 10:46:16 +02:00
923f7efab0
Prevent crash (seg fault), if measure statement is incomplete
2023-05-27 10:46:01 +02:00
66a4b2226e
.libsave: don't save the command itself, improve messaging
2023-05-27 10:44:56 +02:00
006a66b055
.libsave: Print to file the expanded library read by .lib
2023-05-27 10:44:04 +02:00
b6e9ba20b9
Add another error qualifier to decribe the current policy
...
when a doubling token exists (or is created) in the netlist.
2023-05-27 10:43:40 +02:00
c6efc6bc9c
Send 'refernce value' to stdout, not to stderr
2023-05-27 10:43:16 +02:00
ad5bb9eb8d
Fix Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Do not require breakpoints to be hit almost exactly before scheduling
the next one. That may cause the next breakpoint to be lost.
2023-05-27 10:43:01 +02:00
50a9daf24a
Line concatenation: use dstring instead of tprintf:
...
Parsing time of Skywater libs reduced by more than 35%.
2023-05-27 10:42:47 +02:00
972ff885d0
Suppress (rare) crashes during setiup
...
if device or model lists are missing.
2023-05-27 10:42:27 +02:00
6c9994ea9f
Remove linker warnings in MSVC
2023-05-27 10:42:12 +02:00
0b73d95f13
Formatting
2023-05-27 10:41:56 +02:00
962d9d2998
Avoid user induced buffer overflows.
...
Check against NULL pointer.
2023-05-27 10:41:49 +02:00
d2177bbd69
Prevent reading from NULL
2023-05-27 10:41:40 +02:00
924dc10368
get the right place for variable declaration
2023-05-27 10:41:29 +02:00
a4f6a777c0
few cleanings to prevent compiler warnings
2023-05-27 10:41:21 +02:00
5c32a3fb9c
prevent unitialized variables
2023-05-27 10:41:12 +02:00
6b85bcb805
Allocate compound gate connectors where needed.
2023-05-27 10:41:04 +02:00
de34a90bb4
Create correct translations of degenerate compound gates with $d_hi/$d_lo inputs.
2023-05-27 10:40:51 +02:00
a39052cd14
Make voltage ramp smooth around 0 and around end of ramp.
2023-05-27 10:40:42 +02:00
678a6582f6
A preliminary fix to reduce the amount of missing pulses considerably.
...
Probably not yet the final solution.
2023-05-27 10:40:32 +02:00
4231ad3f5f
Prevent reading from NULL when user input is something like .ic=v
2023-05-27 10:40:24 +02:00
02109587ee
not to forget the overlap capacitances in AC
2023-05-27 10:40:08 +02:00
56b5041266
selfheating only with rth>0
2023-05-27 10:39:48 +02:00
2fff3e2bc0
use true vector size for memcpy
2023-05-27 10:39:39 +02:00
de09636d1a
general update: fix temperature update, improve performance
2023-05-27 10:39:33 +02:00
f33e899fda
white spaces
2023-05-27 10:39:25 +02:00
d053fbda93
vbic: correct soa-check warning for C-S branch
2023-05-27 10:39:14 +02:00
797795e7c0
Shift all compatibility handlinmg from inpcom.c into its own source files
...
inpcompat.c and inpcompat.h
2023-05-27 10:39:05 +02:00
14a403e193
Use ~ on the input of a tristate buffer for INV3, and avoid creating an extra inverter. For ff/latch use ~ on set/reset and jkff clock inputs to avoid creating extra inverters.
2023-05-27 10:38:40 +02:00
b5d5cfd543
vbic: selfheating switch selft has priority, but keep compatibility
2023-05-27 10:38:25 +02:00
6c64d463c8
Reduce excessive use of TREALLOC
2023-05-26 13:31:08 +02:00
5f39fd80fb
re-formatting the code
2023-05-26 12:16:55 +02:00
61f7188ef0
Slightly improve error handling and warning message
2023-05-22 15:18:39 +02:00
3071cdd2d5
.csparam: Add some safeguarding against wrong input and crash,
...
allow multiple parameters in a .csparam row (like .param).
2023-05-22 14:46:17 +02:00
edf2c625e1
Safeguard against bad arguments (no crash upon NULL)
2023-05-17 10:08:38 +02:00
b271b6d9e3
safeguard against crash upon buggy input
2023-05-17 09:32:23 +02:00
2206956bc1
Make error message more verbose and useful
2023-05-13 23:43:44 +02:00
73e3e7f952
Correct the warning message
2023-05-12 20:02:31 +02:00
b97c273805
Prevent a crash when number of nodes differs in subckt and X call.
2023-05-12 17:00:08 +02:00
8b8200df88
Improve error messages
2023-05-12 16:59:27 +02:00
1f58cd7618
Plug a memory leak
2023-05-08 20:18:55 +02:00
5047a19112
Enable history substitution of interactive commands only when variable 'histsubst' is set.
...
This feature is in conflict with ! (logic inversion)
in .control language logic expressions.
2023-05-07 15:48:06 +02:00
48668c7d6e
make accessible
2023-05-07 15:07:08 +02:00
fdb8ee3806
Add a "-w" option to the iplot command. It sets a width for the
...
window (in the current scale units) so that it does not re-scale
on overflow, but instead plots recently-generated data on a fixed scale.
2023-05-02 13:13:02 +01:00
81e07e8ece
In graf.c change local function set() to do what you might expect,
...
rather than the opposite. Also fix a debug message.
2023-05-02 12:52:45 +01:00
79c69e0644
Fix error in previous fix for Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Non-periodic PWL waveforms reverted to zero on termination.
2023-04-26 21:38:25 +01:00
675b9e6fa2
Prevent crash (seg fault), if measure statement is incomplete
2023-04-26 17:06:39 +02:00
dfb53459dc
.libsave: don't save the command itself, improve messaging
2023-04-26 11:26:11 +02:00
ff9ff26613
.libsave: Print to file the expanded library read by .lib
2023-04-26 11:26:04 +02:00
81012de4d0
Add another error qualifier to decribe the current policy
...
when a doubling token exists (or is created) in the netlist.
2023-04-25 14:37:00 +02:00
28a3413dd2
Send 'refernce value' to stdout, not to stderr
2023-04-25 14:34:51 +02:00
9c71db3a72
Fix Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Do not require breakpoints to be hit almost exactly before scheduling
the next one. That may cause the next breakpoint to be lost.
2023-04-22 14:56:01 +02:00
5bd0346b64
Line concatenation: use dstring instead of tprintf:
...
Parsing time of Skywater libs reduced by more than 35%.
2023-04-22 14:55:23 +02:00
f5279c0ef5
Suppress (rare) crashes during setiup
...
if device or model lists are missing.
2023-04-18 10:48:08 +02:00
ee238b1632
Remove linker warnings in MSVC
2023-04-17 15:03:53 +02:00
9bc9d94244
Formatting
2023-04-17 15:00:28 +02:00
c179b01734
Avoid user induced buffer overflows.
...
Check against NULL pointer.
2023-04-17 13:53:37 +02:00
200cff4bdc
Prevent reading from NULL
2023-04-17 11:54:25 +02:00
7fc90a332a
get the right place for variable declaration
2023-04-15 17:42:20 +02:00
4fed4bafa1
few cleanings to prevent compiler warnings
2023-04-15 16:57:33 +02:00
77afc678dd
prevent unitialized variables
2023-04-15 13:50:05 +02:00
601d4bf57d
Allocate compound gate connectors where needed.
2023-04-15 11:35:39 +02:00
9f2192e711
Create correct translations of degenerate compound gates with $d_hi/$d_lo inputs.
2023-04-15 11:35:24 +02:00
4e51598562
Make voltage ramp smooth around 0 and around end of ramp.
2023-04-15 11:10:25 +02:00
c8a7f07ac1
A preliminary fix to reduce the amount of missing pulses considerably.
...
Probably not yet the final solution.
2023-04-15 10:52:59 +02:00
3d0fab9c55
Prevent reading from NULL when user input is something like .ic=v
2023-04-12 13:40:05 +02:00
add9b1d77f
not to forget the overlap capacitances in AC
2023-04-10 11:36:20 +02:00
af1963fc39
selfheating only with rth>0
2023-04-08 20:44:19 +02:00
db9711daf4
use true vector size for memcpy
2023-04-08 17:29:25 +02:00
c6a66c4c5e
general update: fix temperature update, improve performance
2023-04-08 17:10:04 +02:00
03d5f5f1e1
white spaces
2023-04-08 17:00:02 +02:00
b9ac15acf2
Merge branch 'pre-master' of ssh://git.code.sf.net/p/ngspice/ngspice into pre-master
2023-04-08 15:25:16 +02:00
217e0577b8
Shift all compatibility handlinmg from inpcom.c into its own source files
...
inpcompat.c and inpcompat.h
2023-04-08 15:24:00 +02:00
51802b8df2
vbic: correct soa-check warning for C-S branch
2023-04-03 11:30:16 +02:00
a531d8428c
Use ~ on the input of a tristate buffer for INV3, and avoid creating an extra inverter. For ff/latch use ~ on set/reset and jkff clock inputs to avoid creating extra inverters.
2023-04-02 23:08:52 +02:00
d4f49f1273
Merge branch 'pre-master' of ssh://git.code.sf.net/p/ngspice/ngspice into pre-master
2023-04-02 22:57:55 +02:00
a3bc6ae744
vbic: selfheating switch selft has priority, but keep compatibility
2023-04-02 17:22:52 +02:00
d53acbed8e
Add noise capability to XSPICE code models
...
Coded according to acan., AC analysis
MIF_NOI is not yet supported by any code model, so
MIF_AC is used (code models behave like in ac mode,
they are noiseless.
2023-04-02 15:06:28 +02:00
3c41ab1190
Formatting with MSVC2022
2023-04-02 15:06:23 +02:00
5aa48cab0b
Do not generate netlist lines that use non-existent libraries.
...
To support that, give global scope to function inp_pathresolve()
in inpcom.c. Update internal documentation (long comment).
2023-04-01 13:56:12 +02:00
8f8f7ff8ab
Command 'listing r': No extra formatting, truncation etc.
...
of netlist lines when printing to file or console.
2023-04-01 13:50:17 +02:00
95c4c0f587
Add inertial.h to the distributable headers
2023-03-25 15:36:15 +01:00
311ddeac0d
Prepare for ngspice-40
2023-03-24 22:27:12 +01:00
062785319a
When '.probe alli' is set, disable auto bridging and set a flag
2023-03-24 22:10:18 +01:00
ce38a768b5
typo
2023-03-24 22:10:12 +01:00
c30af55491
Add operating point information to SOA check,
...
using vbefwd, vbcfwd, and vsubfwd
Operating point heck is enabled by .options warn=2
2023-03-24 22:10:07 +01:00
443567dbaf
Add SOA-check for collector-substrate diode (model parameter bvsub)
2023-03-24 22:09:55 +01:00
ff77c583d7
Add model parameter selft, to switch on self-heating, default: off (selft=0)
2023-03-24 22:09:42 +01:00
5197200fb3
Fix crash reported by Brian Taylor. If "source" is used after
...
analysis, the circuit is both deleted and destroyed. Beware of
double frees.
2023-03-22 14:30:18 +01:00
98333ee89a
Fix a memory leak reported by Brian Taylor that was introduced
...
by commit 4d8e17487b
2023-03-22 14:30:11 +01:00
82de3db8ad
VBIC: Add bvbe, bvbc, and bvce as redundant SOA parameters
2023-03-22 14:30:01 +01:00
f121c433a7
Check for buggy diode instance line, avoid crash
2023-03-22 14:29:48 +01:00
2ce18ab184
Add VDMOS default junction cap IRF540 IRF9540
2023-03-22 14:29:37 +01:00
2a647f8462
Set default VDMOS model parameters to resemble IRF540, 9540
2023-03-22 14:29:22 +01:00
e25f8bd522
Add inertial delay to missed d_xnor and tidy blank lines in d_xor.
2023-03-22 14:29:03 +01:00
cecce5163e
Inertial delay for remaining simple gates and buffers:
...
nand or xor open_c open_e, but not tristate.
2023-03-22 14:28:51 +01:00
Holger Vogt
Brian Taylor
Giles Atkinson
dwarning
Pascal Kuthe