8ce190e7d6
Improve commands for vector scales. "setscale" can now change
...
or clear the scale of an individual vector and "compose" can
explicitly create a vector from XSPICE event node history.
2023-06-20 20:01:31 +02:00
64cbf224b5
Error print output consistenly only to stderr.
...
Replace out_printf by fprint(stderr, ...
2023-06-20 19:56:55 +02:00
3fd7bd2183
Prevent crash when ControlledExit* is not initialized
...
in ngspice shared library.
2023-06-18 10:32:01 +02:00
8d9695d7d6
Fix bug 637
...
Prevent crash when external current source is used.
2023-06-18 10:29:43 +02:00
82796a6fa6
Prevent crash if EXTERNAL voltage source is used
...
Fixes
98763c0ad
2023-06-14 15:34:45 +02:00
5761b71ecd
improve comment
2023-06-13 20:06:27 +02:00
a244e023c4
Prevent crash if *line == NULL
2023-06-13 20:05:49 +02:00
818bd19798
Revert "Prevent crash if *line == NULL"
...
This reverts commit b72f9516ac
2023-06-13 20:02:27 +02:00
216e5cb58b
Skip title line when resorting .params, .meas, .temp
2023-06-13 19:57:19 +02:00
b72f9516ac
Prevent crash if *line == NULL
2023-06-13 19:56:07 +02:00
2740d9a79b
Fix Bug #635 - "Starting ngspice with HOME env variable unset causes segfault".
2023-06-13 19:54:49 +02:00
bda4a83dc6
Revert "Skip the title line when re-sorting parameters"
...
This reverts commit 72496da4c9
2023-06-12 23:20:46 +02:00
630e800bd6
The 'plot' command is not available in batch mode.
...
Issue a warning and ignore it.
2023-06-09 16:31:04 +02:00
28f641b318
Remove the error message when a simulation has been started via the .control section.
2023-06-09 16:10:37 +02:00
d76e7362e7
Make the error message a little more reasonable.
...
Unfortunately the current setup does not easily allow naming
the offending command.
2023-06-09 16:09:57 +02:00
cdf66fac6b
Error message up to now was strictly for command line interactive use only.
...
Improve error message when parsing .ac lines.
2023-06-09 14:45:43 +02:00
72496da4c9
Skip the title line when re-sorting parameters
...
and removing .meas statement.
2023-06-09 14:44:40 +02:00
bf1dfa0127
Prevent crash if s == NULL
2023-06-07 16:25:24 +02:00
5e73be130a
Allow ';' also at the beginning of a line.
2023-06-04 14:53:38 +02:00
a99caf504f
No syntax check for title line
2023-06-04 14:36:27 +02:00
1ff095321c
add comment
2023-06-04 14:36:03 +02:00
525d221325
Prevent crash if no or not enough coeffs are given.
...
r is then probably not the repeat coefficient.
2023-06-04 14:23:09 +02:00
6dc09e6592
During syntax check: v,i sources need two nodes,
...
and prevent crash upon buggy ac input.
2023-06-04 14:01:44 +02:00
1ddb1f58b4
Bail out if {...} or '...' are missing around RHS of the equation.
...
(...) may be possible, elsewhere additional {} are put around,
so we have {(...)}.
2023-06-04 10:36:21 +02:00
3a535f19db
Add a control language function cvector, to create a complex vector.
...
Let vec1 = cvector(50)
will generate a complex vector, with the real part values
increasing from 0 to 49, the imaginary values are set to 0.
Useful in ac loops to store result data.
2023-06-04 09:46:13 +02:00
10e86d72d3
Prevent crash upon buggy user input (missing ] or >)
2023-06-03 17:09:10 +02:00
a03369fc12
Improve error message
2023-06-03 15:48:06 +02:00
7de5fd276e
CIDER: Plug some memory leak
2023-06-02 22:30:27 +02:00
27173c9622
CIDER: Plug some memory leaks by adding to TWOdestroy()
2023-06-02 19:44:34 +02:00
5ba0177f21
CIDER: Plug small memory leaks in INPparseNumMod()
2023-06-02 19:43:47 +02:00
981c63f1ab
Add an extra model stitching for CIDER only.
...
This one fills in actualLine, which is use by
parsing the CIDER model parameters in INPparseNumMod()
from inpgmod.c
2023-06-02 15:31:28 +02:00
e61db1d2cd
Add parsing and translation of the FREQ form of E-source devices,
...
integrated with the existing parsing of AND/NAND/OR/NOR forms (inpcom.c).
For the implementation, add a new analog XSPICE code model, xfer.
Add an example to examples/sp.
2023-05-31 16:04:51 +02:00
37453db34d
Fix Bug #623 - "Parser warning for voltage source".
...
Do not warn when a single-element vector lacks parentheses.
2023-05-29 09:47:44 +01:00
94da54bcea
Always propgate any individual scale for a vector that appears
...
in an expression, resolving conflicts by matching length and warning
only when making an arbitary choice. One effect of this is that it
is now possible to mix analog nodes with offset digital nodes
(an expression like dvalue+6) without a warning and get a correct plot.
2023-05-29 09:47:27 +01:00
d55143edca
When creating a plot vector from XSPICE event history, add a
...
final point at the end of the vector, so that a plotted line
does not end at the last event, leaving an odd spike.
2023-05-29 09:47:03 +01:00
0616965a67
Fix Bug #630 - "pwl if r=last time, simulation never ends".
...
Allowing a PWL repeat to start at the last time-point makes no sense.
2023-05-29 09:19:18 +01:00
9c75367cfb
Fix another error in 9c71db3a72.
2023-05-29 09:19:18 +01:00
6c420525d0
Apply a patch from Aleksey Morozov to fix a bug that he identified
...
and reproduced. It is the same as Bug #331 -
"XSpice skips digital output point" except that it applies to the
instance queue, not the event queue.
2023-05-29 09:19:18 +01:00
1cd15e382e
Reduce excessive use of TREALLOC
2023-05-27 16:44:30 +02:00
a56b8b2190
Revert "Reduce excessive use of TREALLOC"
...
This reverts commit 6c64d463c8
2023-05-27 16:17:23 +02:00
fd24e5af7e
re-formatting the code
2023-05-27 10:50:14 +02:00
d295fe3ac6
Slightly improve error handling and warning message
2023-05-27 10:50:02 +02:00
823465ceb8
.csparam: Add some safeguarding against wrong input and crash,
...
allow multiple parameters in a .csparam row (like .param).
2023-05-27 10:49:53 +02:00
b24c613ce6
Safeguard against bad arguments (no crash upon NULL)
2023-05-27 10:49:19 +02:00
ba7ad783a8
safeguard against crash upon buggy input
2023-05-27 10:49:07 +02:00
c723e124d9
Make error message more verbose and useful
2023-05-27 10:48:57 +02:00
9b3146b1fb
Correct the warning message
2023-05-27 10:48:41 +02:00
e834c89313
Prevent a crash when number of nodes differs in subckt and X call.
2023-05-27 10:48:30 +02:00
8c9602574e
Improve error messages
2023-05-27 10:48:15 +02:00
6ea2882c3b
Plug a memory leak
2023-05-27 10:48:00 +02:00
96bebafac5
Enable history substitution of interactive commands only when variable 'histsubst' is set.
...
This feature is in conflict with ! (logic inversion)
in .control language logic expressions.
2023-05-27 10:47:27 +02:00
e5d1885e39
make accessible
2023-05-27 10:47:11 +02:00
45015f974d
Add a "-w" option to the iplot command. It sets a width for the
...
window (in the current scale units) so that it does not re-scale
on overflow, but instead plots recently-generated data on a fixed scale.
2023-05-27 10:46:45 +02:00
7a5514a1ff
In graf.c change local function set() to do what you might expect,
...
rather than the opposite. Also fix a debug message.
2023-05-27 10:46:24 +02:00
1a97e1097f
Fix error in previous fix for Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Non-periodic PWL waveforms reverted to zero on termination.
2023-05-27 10:46:16 +02:00
923f7efab0
Prevent crash (seg fault), if measure statement is incomplete
2023-05-27 10:46:01 +02:00
66a4b2226e
.libsave: don't save the command itself, improve messaging
2023-05-27 10:44:56 +02:00
006a66b055
.libsave: Print to file the expanded library read by .lib
2023-05-27 10:44:04 +02:00
b6e9ba20b9
Add another error qualifier to decribe the current policy
...
when a doubling token exists (or is created) in the netlist.
2023-05-27 10:43:40 +02:00
c6efc6bc9c
Send 'refernce value' to stdout, not to stderr
2023-05-27 10:43:16 +02:00
ad5bb9eb8d
Fix Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Do not require breakpoints to be hit almost exactly before scheduling
the next one. That may cause the next breakpoint to be lost.
2023-05-27 10:43:01 +02:00
50a9daf24a
Line concatenation: use dstring instead of tprintf:
...
Parsing time of Skywater libs reduced by more than 35%.
2023-05-27 10:42:47 +02:00
972ff885d0
Suppress (rare) crashes during setiup
...
if device or model lists are missing.
2023-05-27 10:42:27 +02:00
6c9994ea9f
Remove linker warnings in MSVC
2023-05-27 10:42:12 +02:00
0b73d95f13
Formatting
2023-05-27 10:41:56 +02:00
962d9d2998
Avoid user induced buffer overflows.
...
Check against NULL pointer.
2023-05-27 10:41:49 +02:00
d2177bbd69
Prevent reading from NULL
2023-05-27 10:41:40 +02:00
924dc10368
get the right place for variable declaration
2023-05-27 10:41:29 +02:00
a4f6a777c0
few cleanings to prevent compiler warnings
2023-05-27 10:41:21 +02:00
5c32a3fb9c
prevent unitialized variables
2023-05-27 10:41:12 +02:00
6b85bcb805
Allocate compound gate connectors where needed.
2023-05-27 10:41:04 +02:00
de34a90bb4
Create correct translations of degenerate compound gates with $d_hi/$d_lo inputs.
2023-05-27 10:40:51 +02:00
a39052cd14
Make voltage ramp smooth around 0 and around end of ramp.
2023-05-27 10:40:42 +02:00
678a6582f6
A preliminary fix to reduce the amount of missing pulses considerably.
...
Probably not yet the final solution.
2023-05-27 10:40:32 +02:00
4231ad3f5f
Prevent reading from NULL when user input is something like .ic=v
2023-05-27 10:40:24 +02:00
02109587ee
not to forget the overlap capacitances in AC
2023-05-27 10:40:08 +02:00
56b5041266
selfheating only with rth>0
2023-05-27 10:39:48 +02:00
2fff3e2bc0
use true vector size for memcpy
2023-05-27 10:39:39 +02:00
de09636d1a
general update: fix temperature update, improve performance
2023-05-27 10:39:33 +02:00
f33e899fda
white spaces
2023-05-27 10:39:25 +02:00
d053fbda93
vbic: correct soa-check warning for C-S branch
2023-05-27 10:39:14 +02:00
797795e7c0
Shift all compatibility handlinmg from inpcom.c into its own source files
...
inpcompat.c and inpcompat.h
2023-05-27 10:39:05 +02:00
14a403e193
Use ~ on the input of a tristate buffer for INV3, and avoid creating an extra inverter. For ff/latch use ~ on set/reset and jkff clock inputs to avoid creating extra inverters.
2023-05-27 10:38:40 +02:00
b5d5cfd543
vbic: selfheating switch selft has priority, but keep compatibility
2023-05-27 10:38:25 +02:00
6c64d463c8
Reduce excessive use of TREALLOC
2023-05-26 13:31:08 +02:00
5f39fd80fb
re-formatting the code
2023-05-26 12:16:55 +02:00
61f7188ef0
Slightly improve error handling and warning message
2023-05-22 15:18:39 +02:00
3071cdd2d5
.csparam: Add some safeguarding against wrong input and crash,
...
allow multiple parameters in a .csparam row (like .param).
2023-05-22 14:46:17 +02:00
edf2c625e1
Safeguard against bad arguments (no crash upon NULL)
2023-05-17 10:08:38 +02:00
b271b6d9e3
safeguard against crash upon buggy input
2023-05-17 09:32:23 +02:00
2206956bc1
Make error message more verbose and useful
2023-05-13 23:43:44 +02:00
73e3e7f952
Correct the warning message
2023-05-12 20:02:31 +02:00
b97c273805
Prevent a crash when number of nodes differs in subckt and X call.
2023-05-12 17:00:08 +02:00
8b8200df88
Improve error messages
2023-05-12 16:59:27 +02:00
1f58cd7618
Plug a memory leak
2023-05-08 20:18:55 +02:00
5047a19112
Enable history substitution of interactive commands only when variable 'histsubst' is set.
...
This feature is in conflict with ! (logic inversion)
in .control language logic expressions.
2023-05-07 15:48:06 +02:00
48668c7d6e
make accessible
2023-05-07 15:07:08 +02:00
fdb8ee3806
Add a "-w" option to the iplot command. It sets a width for the
...
window (in the current scale units) so that it does not re-scale
on overflow, but instead plots recently-generated data on a fixed scale.
2023-05-02 13:13:02 +01:00
81e07e8ece
In graf.c change local function set() to do what you might expect,
...
rather than the opposite. Also fix a debug message.
2023-05-02 12:52:45 +01:00
79c69e0644
Fix error in previous fix for Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Non-periodic PWL waveforms reverted to zero on termination.
2023-04-26 21:38:25 +01:00
675b9e6fa2
Prevent crash (seg fault), if measure statement is incomplete
2023-04-26 17:06:39 +02:00
dfb53459dc
.libsave: don't save the command itself, improve messaging
2023-04-26 11:26:11 +02:00
ff9ff26613
.libsave: Print to file the expanded library read by .lib
2023-04-26 11:26:04 +02:00
81012de4d0
Add another error qualifier to decribe the current policy
...
when a doubling token exists (or is created) in the netlist.
2023-04-25 14:37:00 +02:00
28a3413dd2
Send 'refernce value' to stdout, not to stderr
2023-04-25 14:34:51 +02:00
9c71db3a72
Fix Bug #607 -
...
"DC Source with Pulse stops pulsing half way through simulation".
Do not require breakpoints to be hit almost exactly before scheduling
the next one. That may cause the next breakpoint to be lost.
2023-04-22 14:56:01 +02:00
5bd0346b64
Line concatenation: use dstring instead of tprintf:
...
Parsing time of Skywater libs reduced by more than 35%.
2023-04-22 14:55:23 +02:00
f5279c0ef5
Suppress (rare) crashes during setiup
...
if device or model lists are missing.
2023-04-18 10:48:08 +02:00
ee238b1632
Remove linker warnings in MSVC
2023-04-17 15:03:53 +02:00
9bc9d94244
Formatting
2023-04-17 15:00:28 +02:00
c179b01734
Avoid user induced buffer overflows.
...
Check against NULL pointer.
2023-04-17 13:53:37 +02:00
200cff4bdc
Prevent reading from NULL
2023-04-17 11:54:25 +02:00
7fc90a332a
get the right place for variable declaration
2023-04-15 17:42:20 +02:00
4fed4bafa1
few cleanings to prevent compiler warnings
2023-04-15 16:57:33 +02:00
77afc678dd
prevent unitialized variables
2023-04-15 13:50:05 +02:00
601d4bf57d
Allocate compound gate connectors where needed.
2023-04-15 11:35:39 +02:00
9f2192e711
Create correct translations of degenerate compound gates with $d_hi/$d_lo inputs.
2023-04-15 11:35:24 +02:00
4e51598562
Make voltage ramp smooth around 0 and around end of ramp.
2023-04-15 11:10:25 +02:00
c8a7f07ac1
A preliminary fix to reduce the amount of missing pulses considerably.
...
Probably not yet the final solution.
2023-04-15 10:52:59 +02:00
3d0fab9c55
Prevent reading from NULL when user input is something like .ic=v
2023-04-12 13:40:05 +02:00
add9b1d77f
not to forget the overlap capacitances in AC
2023-04-10 11:36:20 +02:00
af1963fc39
selfheating only with rth>0
2023-04-08 20:44:19 +02:00
db9711daf4
use true vector size for memcpy
2023-04-08 17:29:25 +02:00
c6a66c4c5e
general update: fix temperature update, improve performance
2023-04-08 17:10:04 +02:00
03d5f5f1e1
white spaces
2023-04-08 17:00:02 +02:00
b9ac15acf2
Merge branch 'pre-master' of ssh://git.code.sf.net/p/ngspice/ngspice into pre-master
2023-04-08 15:25:16 +02:00
217e0577b8
Shift all compatibility handlinmg from inpcom.c into its own source files
...
inpcompat.c and inpcompat.h
2023-04-08 15:24:00 +02:00
51802b8df2
vbic: correct soa-check warning for C-S branch
2023-04-03 11:30:16 +02:00
a531d8428c
Use ~ on the input of a tristate buffer for INV3, and avoid creating an extra inverter. For ff/latch use ~ on set/reset and jkff clock inputs to avoid creating extra inverters.
2023-04-02 23:08:52 +02:00
d4f49f1273
Merge branch 'pre-master' of ssh://git.code.sf.net/p/ngspice/ngspice into pre-master
2023-04-02 22:57:55 +02:00
a3bc6ae744
vbic: selfheating switch selft has priority, but keep compatibility
2023-04-02 17:22:52 +02:00
d53acbed8e
Add noise capability to XSPICE code models
...
Coded according to acan., AC analysis
MIF_NOI is not yet supported by any code model, so
MIF_AC is used (code models behave like in ac mode,
they are noiseless.
2023-04-02 15:06:28 +02:00
3c41ab1190
Formatting with MSVC2022
2023-04-02 15:06:23 +02:00
5aa48cab0b
Do not generate netlist lines that use non-existent libraries.
...
To support that, give global scope to function inp_pathresolve()
in inpcom.c. Update internal documentation (long comment).
2023-04-01 13:56:12 +02:00
8f8f7ff8ab
Command 'listing r': No extra formatting, truncation etc.
...
of netlist lines when printing to file or console.
2023-04-01 13:50:17 +02:00
95c4c0f587
Add inertial.h to the distributable headers
2023-03-25 15:36:15 +01:00
311ddeac0d
Prepare for ngspice-40
2023-03-24 22:27:12 +01:00
062785319a
When '.probe alli' is set, disable auto bridging and set a flag
2023-03-24 22:10:18 +01:00
ce38a768b5
typo
2023-03-24 22:10:12 +01:00
c30af55491
Add operating point information to SOA check,
...
using vbefwd, vbcfwd, and vsubfwd
Operating point heck is enabled by .options warn=2
2023-03-24 22:10:07 +01:00
443567dbaf
Add SOA-check for collector-substrate diode (model parameter bvsub)
2023-03-24 22:09:55 +01:00
ff77c583d7
Add model parameter selft, to switch on self-heating, default: off (selft=0)
2023-03-24 22:09:42 +01:00
5197200fb3
Fix crash reported by Brian Taylor. If "source" is used after
...
analysis, the circuit is both deleted and destroyed. Beware of
double frees.
2023-03-22 14:30:18 +01:00
98333ee89a
Fix a memory leak reported by Brian Taylor that was introduced
...
by commit 4d8e17487b
2023-03-22 14:30:11 +01:00
82de3db8ad
VBIC: Add bvbe, bvbc, and bvce as redundant SOA parameters
2023-03-22 14:30:01 +01:00
f121c433a7
Check for buggy diode instance line, avoid crash
2023-03-22 14:29:48 +01:00
2ce18ab184
Add VDMOS default junction cap IRF540 IRF9540
2023-03-22 14:29:37 +01:00
2a647f8462
Set default VDMOS model parameters to resemble IRF540, 9540
2023-03-22 14:29:22 +01:00
e25f8bd522
Add inertial delay to missed d_xnor and tidy blank lines in d_xor.
2023-03-22 14:29:03 +01:00
cecce5163e
Inertial delay for remaining simple gates and buffers:
...
nand or xor open_c open_e, but not tristate.
2023-03-22 14:28:51 +01:00
db38d4ad54
Correct timing of transitions to UNKNOWN.
2023-03-22 14:28:37 +01:00
240a2b9406
Add missed file inertial.h.
2023-03-22 14:28:23 +01:00
4623a04615
Interim version of inertial delay for tristate buffer.
...
This does not handle three-way or mixed transitions.
2023-03-22 14:28:15 +01:00
e3b4df6a51
First group of digital code models with improved implementation
...
of inertial delay: buffer, inverter, and, nor. Also adds
utility function cm_is_inertial(().
2023-03-22 14:27:54 +01:00
2643e3b17f
New code-model library functions cm_schedule_output() and cm_getvar().
...
To be used in the inertial delay code for digital code models.
2023-03-22 14:27:35 +01:00
c1659a64c3
Change output event setup in evtload.c so that, when making an event call
...
to a code model, there is no longer a reference to the value of the event
at the head of the free list. That allows all such free lists (with the
same data type) to be combined, probably improving performance.
This is in preparation for full implementation of inertial delay for
digital nodes.
2023-03-22 14:27:19 +01:00
2d0561f386
Allow string-valued parameters to XSPICE device models with no default.
...
The code model then sees the value NULL. Needed for the "family"
parameter on logic models, used by automatic bridge insertion.
2023-03-22 14:27:06 +01:00
8c69ada5b5
The logicexp example in the PSpice ref. manual has a name with a '+' character (LCN+4). Update lexer_scan.
2023-03-22 14:26:43 +01:00
40a540a2ff
Add inertial_delay=true to .model statements generated when U* instances in PSpice library subckts are translated to Xspice. Any other Xspice A* digital instances might have different inertial_delay settings in their models, so potentially there could be a mixture of delay types. For example, if a user wishes to model a DLYLINE using a d_buffer with inertial_delay=false and equal rise/fall delays.
2023-03-22 14:26:18 +01:00
164db58404
The intent now is to rely on a variable setting in .spiceinit to control the use of inertial delay XSPICE digital models. This will apply to U* instances in subcircuits which are translated to XSPICE.
2023-03-22 14:25:51 +01:00
86951501a7
Add eprvcd to the commands which set node names to lower case,
...
but not the file names after >
Does not work for manually entered eprvcd commands, where the user
has to provide lower case node names.
2023-03-19 15:24:27 +01:00
3632a6b4ae
We need to translate from degree to rad
2023-03-18 22:32:25 +01:00
2a6052517b
Fix prvious commit: allow access to all vector elements of cc
2023-03-18 22:32:19 +01:00
68156fa62c
Complex number handling other than MSVC
2023-03-18 22:32:07 +01:00
71571a1432
Add function atanh to .control section
2023-03-18 22:31:48 +01:00
3996d27b29
Make code a little more efficient
2023-03-18 22:31:33 +01:00
7af6c4a661
Re-enable single line parameter lists, separated by commas
2023-03-18 22:31:27 +01:00
f34ff7e63c
Revert "implement typedpnjlim as optional limiter for verilog-a models"
...
This reverts commit f73d3b20a0
2023-03-18 22:31:04 +01:00
63d86f5af8
Prevent a crash in strchr
...
Reported by KiCad Sentry
2023-03-18 14:37:59 +01:00
e4202ea181
The tc for R, L, C may include an expression
...
like tc={expression} or tc={expression}, 1.3u or
tc={expression}, {expression2}
2023-03-18 14:37:53 +01:00
d8505f0069
Make error message more verbose by a hint to the line (fragment).
2023-03-18 14:37:47 +01:00
c12296182c
The code in src/frontend/subckt.c has a fixed-size structure called table at the top with a size set to N_GLOBAL_NODES = 1005. If the number of items passed in formal and actual exceeds 1005, then ngspice exits immediately with an error.
...
This patch lets table be reallocated on the fly as needed to accommodate the number of subcircuit arguments, instead of being a fixed value.
2023-03-18 14:37:40 +01:00
e4601c16ee
Not a warning but an error, stopping the simulation
2023-03-18 14:37:33 +01:00
f32f3ac8cd
Improve previous commit: A bad .model line leads to a breakup
...
of the simulation.
2023-03-18 14:37:26 +01:00
c61acefef7
Prevent crash when a bad .model line is given, like
...
.model
.model xxx
2023-03-18 14:37:19 +01:00
247562c096
Update copyright notice
2023-03-18 14:37:08 +01:00
bcec3cb5e3
Updating links to ngspice web pages
2023-03-18 14:37:02 +01:00
4cc63494db
Improve error message
...
Typo
2023-03-18 14:36:55 +01:00
4111aaf110
When logicexp has a ugate timing model other than d0_gate, use its delays for an inverter or buffer.
2023-03-18 14:36:45 +01:00
a6b2773c90
For a ugate timing model, when tphlXX/tplhXX is not found, set the fall/rise delay to zero (1.0e-12).
2023-03-18 14:36:35 +01:00
0e5a5a62ac
74F550 and 74F551 have only fall delays on the inverters. Use the fall delay for both rise and fall.
2023-03-18 14:36:23 +01:00
3a76a1ef52
Prepare for inertial_delay model parameter.
2023-03-18 14:36:17 +01:00
4b30113f60
Check current_subckt is set when printing TRANS_OUT.
2023-03-18 14:36:00 +01:00
ae6375c519
Prevent a crash when "portnum" is used in a voltage source without "z0".
2023-03-18 14:35:51 +01:00
8915d42241
Prevent crash during .probe p(...) when no subcircuits are given.
2023-03-18 14:35:33 +01:00
5ee7a0ad2d
prevent crash when defect .model line is given
...
(no model name or no model type)
2023-03-18 14:35:11 +01:00
d2fb3fb16b
Prevent memory leak.
...
Remove use controls.
Safeguard against NULL.
2023-03-18 14:34:57 +01:00
79fcb5d4bd
Fix plotting bug reported by Robert Turnbull: ngspice-devel 2023-02-10.
2023-03-18 14:34:50 +01:00
0caf1aa815
(fix) CALC_OP during transient analysis in OSDI interface
2023-03-18 14:34:37 +01:00
d4ee9af2e6
We are developing towards ngspice-40
2023-03-18 14:34:27 +01:00
2233e2f825
Fix Bug #624 - "Destroy All Fails with an Open Plot Window" for X11.
...
Move XftDrawDestroy() call to a point where the window still exists.
2023-03-18 14:34:20 +01:00
f83c89cce7
When path is NULL, we don't need to free it.
2023-03-18 14:33:59 +01:00
75f9451702
Fix bug 624 also for MS Windows
...
by moving DestroyGraph() from WM_CLOSE to RemoveWindow()
2023-03-18 14:33:51 +01:00
bd30bd4e85
fix memory leak more rigorously
2023-03-18 14:33:44 +01:00
d495333578
fix small memory leak in OSDI interface
2023-03-18 14:33:34 +01:00
da77fad749
In the very rare case of pPivot being NULL, prevent a crsh
...
by reordering the matrix.
2023-03-18 14:33:25 +01:00
d9b52eb3e1
Fix a bug reported by Thomas Hoffmann in ngspice-users discussion,
...
2023-02-18. Incorrect tests were used to detect a crossing in the
first two data samples.
2023-03-18 14:33:13 +01:00
06aa693852
A new fix for Bug #331 : "XSpice skips digital output point".
...
The problem was caused by removing an output queue from the "modified"
list when it had been modified by processing one of its events.
2023-03-18 14:33:02 +01:00
7457a2684b
Revert "Fixes bug #331"
...
This reverts commit 6d9876229c
2023-03-18 14:32:53 +01:00
dbb5219dc7
Fix a crash reported by Thomas Hoffmann when using the "TARG AT=xxxx"
...
variant of "measure", General Form 1.
2023-03-18 14:32:46 +01:00
8dd16feee4
Use dstrings where fixed size char buffers should not have been used.
2023-03-18 14:32:31 +01:00
3365fd4309
Remove dead code.
2023-03-18 14:32:19 +01:00
50173ac617
Enable potential calls to tprint() for debugging
2023-03-18 14:32:04 +01:00
845dfbd830
diode recombination current emission coefficient default to 2
2023-03-18 14:31:53 +01:00
45e6d319f3
partly revert last commit: only real input vector get special scaling for dc component
2023-03-18 14:31:31 +01:00
bccaee4821
correct fft dc scaling bug #620
2023-03-18 14:31:24 +01:00
7ca305804d
ret variable only used for openMP enabled
2023-03-18 14:31:17 +01:00
9c6fe3f8e4
Definitely exclude A devices from power probing (and others with less than 2 pins).
2023-03-18 14:31:05 +01:00
5924ae2dfb
bug report 619 by Hanspeter Niederstrasser
...
remove double inclusion of stdlib.h
Correction of commit 9e432838c
2023-03-18 14:30:56 +01:00
5cb5d218c9
Remove the obsolete RETSIGTYPE, replace by void
2023-03-18 14:30:29 +01:00
ff9c98f597
Patch 112 by Robert Turnbull
...
Remove compiler warning.
2023-03-18 14:30:15 +01:00
3ff9643f49
Add a scale factor 'a' (atto, 1e-18)
2023-03-18 14:30:03 +01:00
f9ed3fd080
Patch by Robert Turnbull: remove warning messages
2023-02-05 11:25:42 +01:00
4309bad14d
Set the recounter to 0 upon every exit from function inp_get_param_level
2023-02-03 18:50:55 +01:00
f73d3b20a0
implement typedpnjlim as optional limiter for verilog-a models
2023-02-03 12:57:53 +01:00
8063e56fdf
osdi: fix sigfault when using aliasparam
2023-02-03 12:07:11 +01:00
33a3557910
Safeguard against NULL pointers
2023-02-03 11:44:57 +01:00
712ed8ac77
Safeguard against stack overflow, when wrongly introduce a circular
...
parameter dependency
2023-02-03 11:33:36 +01:00
20711c1c25
Safeguard against NULL pointers
2023-02-01 22:35:01 +01:00
56d0c72924
Add port directions when logicexp or pindly are present.
2023-02-01 17:39:37 +01:00
9c9301eca8
Remove delay ifdefs.
2023-02-01 17:38:28 +01:00
f674b64264
Remove dead code from previous commit.
2023-02-01 17:37:36 +01:00
f570b04d6c
For unspecified gate delays (logic and tristate gates), which PSpice would consider as zero, set the rise and fall delays to 1.e-12s (the minimum for Xspice). For dff, jkff, dlatch, and srlatch use the Xspice default 1.0ns for rise and fall delays. If the ngspice variable (ps_port_directions & 2) is true, write the translated subckt to stdout, with TRANS_OUT prefix, for debugging purposes. The user could edit and replace the translated subckt if desired.
2023-02-01 17:36:36 +01:00
26cf1a7a57
max_align_t is used to examine the largest alignment requirement,
...
and it is expected to check the alignment value via alignof, not sizeof.
Otherwise, __attribute__((aligned)) can complain as required alignment
being invalid, e.g. on s390x.
Patch provided by Mamoru Tasaka, Fedora
2023-02-01 13:10:53 +01:00
3598a0d0c1
enable compiling of shared lib without osdi interface
2023-01-30 16:52:14 +01:00
b3676bb763
enable make dist
2023-01-30 13:09:15 +01:00
2e2b74c188
In the ngspice shared library the fcn ivers is called
...
with a NULL argument. The fix safeguards against argv0
being NULL.
In this case Spice_Exec_Path is set to NULL, it is
safeguarded against NULL when being used.
2023-01-30 10:58:50 +01:00
b68f2617c7
Preliminary bug-617 fix:
...
Don't set temperature to a step beyond the sweep boundaries.
2023-01-29 17:05:56 +01:00
6ef94cb9f2
Prevent from endless loop
2023-01-28 17:01:03 +01:00
6da2659026
Remove the debug printout
2023-01-27 16:44:54 +01:00
4b8d575122
Add a user definable variable enable_noisy_r (for .spiceinit)
...
to enable noise calculation for all behavioral resistors.
May locally be switched off by instance parameter noisy=0
If enable_noisy_r is not set, noise simulation
may locally be enabled by instance parameter noisy=1.
2023-01-27 16:12:42 +01:00
167c708e69
Add searchpath for *.osdi relative to ngspice executable
2023-01-27 16:10:28 +01:00
65cd01f3c5
fix comment
2023-01-27 16:09:51 +01:00
802ab2a2c5
Do not try to load *.osdi automatically
2023-01-27 16:09:38 +01:00
be6bd990db
Error message to stderr
2023-01-27 16:09:19 +01:00
b9eef23eed
Update the example structure for OSDI/OpenVAF:
...
all compiled models into lib/ngspice
spinit updated to load the models via command 'osdi'
local calls with 'pre_osdi' commanted out.
2023-01-27 16:08:17 +01:00
71002aa42f
Prepare for ngspice-39
2023-01-24 15:49:42 +01:00
33a2637530
correct header entry
2023-01-24 15:17:14 +01:00
9c26206a68
bsim4 version update from 4.8.1 to 4.8.2
2023-01-24 15:16:55 +01:00
d0c35512ab
properly abort for invalid OSDI paramters
2023-01-23 12:04:10 +01:00
653db022ea
better comment
2023-01-20 15:08:26 +01:00
3260492987
Enhance the search path for osdi files: when not found rel. to
...
inputdir, search rel. to current working directory.
2023-01-20 15:08:14 +01:00
1280e199a3
Add boolean variables as flags when XSPICE and/or OSDI are enabled
2023-01-20 15:07:57 +01:00
49b7cb85db
Add a shunt resistor of 1e15 Ohms to any X (subcircuit call) line
...
when the node name contain 'unconnected' and .probe alli is called.
2023-01-15 13:38:15 +01:00
02789b2c42
The modulo function a % n should accept a==0.
...
The fix adds this to the control section function parser. The numparam
parser already has this feature. n==0 is rejected as usual.
2023-01-15 13:37:57 +01:00
dcfe4e7134
ERROR messages should be printed to stderr.
2023-01-15 13:37:42 +01:00
a76f8d5149
Fix some comments.
2023-01-09 16:33:25 +01:00
167ff74422
enable compiling without XSPICE on specific OSs
2023-01-09 16:32:54 +01:00
036775efa5
OSDI: fix const declaration, unused variables
2023-01-09 16:32:30 +01:00
31b0b640de
For memcpy in PREDICTOR
2023-01-09 16:32:16 +01:00
ebd430e51b
A preliminary fix to bug report 612
...
Don't set series voltage sources when flag probe_alli_nox
is set in .spiceinit
2023-01-09 16:32:00 +01:00
1a4880344f
Update to fcn tprint:
...
allow multiple printouts in a single simulation run,
without overwriting the previous printout.
2023-01-09 16:31:44 +01:00
164ed05786
enable 'off', 'print', 'save' being part of a node name.
...
Only plain 'off' (case of bipolar), or 'print', 'save'
(in case of CIDER) will not be allowed.
2023-01-09 16:31:15 +01:00
6117836d01
Ensure that amatch output is not binary data.
2023-01-09 16:30:22 +01:00
90ec717f3b
Add variable ps_udevice_exit. If set non-zero, ngspice will exit if there is an error processing f_logicexp or f_pindly.
2023-01-09 16:29:24 +01:00
5e6452099e
Return errors from f_logicexp and f_pindly without calling exit.
2023-01-09 16:29:08 +01:00
0a3cdf8e3a
Add more error checks for f_logicexp and f_pindly.
2023-01-09 16:28:43 +01:00
97e0c0f37e
Prevent memory leak while "PREDICTOR" is selected
2023-01-09 16:27:55 +01:00
301f50335d
Add limited support for string-valued parameters in .param lines.
...
The right-hand side of an assignment may be a string expression
made up from quoted strings, and identifiers for other string parameters,
optionally in braces. There may be no un-quoted spaces.
Example: .param str4=str1"String 4"str2{str3}
Subcircuits may have default and actual string parameters, but the values
must be single identifiers, not quoted strings or string expressions.
2023-01-09 16:26:59 +01:00
fe52771aff
Remove the old inverter code.
2022-12-27 14:21:05 +01:00
3578deda80
Refactor new_gen_output_models.
2022-12-27 14:20:43 +01:00
26e73c09b3
add instance parameter mulu0 for mobility reduction bsim4.5 and 4.6
2022-12-27 14:20:20 +01:00
199b9deee6
For OSDI n devices: Enable model translation,
...
if model has been inside subcircuit.
2022-12-27 14:19:37 +01:00
d0bd945c00
slightly optimize predictor
2022-12-27 14:11:07 +01:00
5791a2d449
ensure config.h is always included in cktdefs.h to ensure correct
...
type signature
2022-12-27 14:10:16 +01:00
a7fced9327
ensure compilation succedes without OSDI
2022-12-27 14:09:52 +01:00
79b2d2d520
removed unneded changes
2022-12-27 14:09:22 +01:00
b285fa6e1c
fix opvar readout
2022-12-27 14:08:46 +01:00
06229c2a46
fix typos
2022-12-27 14:08:26 +01:00
3be143423a
add openmp support for osdi
2022-12-27 14:08:08 +01:00
a4d13dae24
Suppress model type warning when device is of type N.
2022-12-27 14:04:56 +01:00
771155e463
Prevent double definition error when both OSDI and XSPICE are enabled.
2022-12-27 14:04:09 +01:00
8f0eab90ee
Replace 'a' by 'n' for OSDI device
2022-12-27 14:03:39 +01:00
e6265a3eed
Move reference designator from A to N
...
replace inp2n by a copy of inp2a
OSDI is now called in case N: in inppas2
2022-12-27 14:03:18 +01:00
a95b114768
Revert previous commit: now treat a devices like ordinary devices.
2022-12-27 13:59:42 +01:00
d8eb685fcc
Preliminary fix to get_number_terminals:
...
check for tokens with '=' to stop and get number of nodes by
stepping back.
2022-12-27 13:59:20 +01:00
6ece9b5748
Exclude XSPICE specific error message.
...
Don't call fcn get_adevice_model_name().
Return a fixed value (5) for number of nodes:
This is wrong. It has to be replaced by a safe
method to figure out the number of terminals for
varying Verilog-A device models.
2022-12-27 13:57:20 +01:00
638ddbc91f
Add case 'a' to fcn translate.
...
This is a hack, to be removed/altered when switching to
reference designator N instead of A.
2022-12-27 13:56:50 +01:00
f75e970ecf
Initialze sim_param_vals
2022-12-27 13:56:24 +01:00
77a86647f7
remove __attribute__, replace by __declspec
2022-12-27 13:55:53 +01:00
6e08bb3090
Add include file shlwapi.h
2022-12-27 13:55:18 +01:00
acfaf023b3
prototype for Verilog-A integration using OSDI and OpenVAF
...
This initial prototype is capable of performing DC, transient and AC
analysis. Not all features of OSDI are supported yet and there are still
some open questions regarding ngspice integration. However many usecase
already work very well and a large amount of CMC models are supported.
The biggest missing feature right now is noise analysis.
test: test case for diode DC working with SH
test: add transient analysis to osdi_diode test
test: added docu text to osdi_diode test
test: added test case directories
fix: bug in osdi_load
test: small change to netlist
fix: implement DEVunsetup
fix: correct behaviour for MODEINITSMSIG
test: osdi diode enable all analysis modes
removed netlist
ignoring test results
added the build of the diode shared object to the python test script
deleting old stuff and always rebuilding the shared object
added diode_va.c to the repo
preparing CI
Create .gitlab-ci.yml file
(testing) add res, cap and multiple devices test
feat: use osdi command to load files
Previously OSDI shared object files were loaded from fixed directories.
This was unreliable, inconvenient and caused conflicts with XSPICE.
This commit remove the old loading mechanism and instead introduces the
`osdi` command that can load (a list of) osdi object files (like the
codemodel command for XSPICE). A typical usecase will use this as a
precommand in the netlist:
.control
pre_osdi foo.osdi
.endc
If the specified file is a relative path it is first resolved relative
to the parent directory of the netlist. If the osdi command is invoked
from the interactive prompt the file is resolved relative to the current
working directory instead.
This commit also moves osdi from the devices folder to the root src
folder like xspice. This better reflects the role of the code as users
may otherthwise (mistakenly) assume that osdi is just another
handwritten model.
test: update tests to new command
fix: do not ignore first parameter
feat: implement log message callback
fix: don't generate ddt matrix/rhs in DC sweep
fix: missing linker script
update to osdi 0.3
(testing) simplify test cases, fix bug
(testing) multiple devices test improvement
(testig) node collapsing bugfix
test: increase tolerance in tests
feat: update to newest OSDI header
fix: temperature update dt behaviour
fix: ignored models
fix: compilation script
fix: allow hicum/l2 to compile with older c++ compilers
fix: set required compiler flags for osdi
fix: disable x by default
fix: add missing SPICE functions
fix: update diode to latest ngspice version
feat: implement python CMC test runner
doc: Add README_OSDI.md
fix: make testing script work with python version before 3.9
fix: free of undefined local variable
fix: do not calculate time derivative during tran op
update osdi version
fixes for compilation on windows
2022-12-27 13:51:57 +01:00
0805856fb7
Distinguish between set/reset delays when possible.
2022-12-19 12:43:00 +01:00
253df17949
Make it optional to use zl/zh/lz/hz delays for utgate.
2022-12-19 12:42:36 +01:00
4c457a3cd4
Avoid unnecessary calculations for utgate.
2022-12-19 12:42:06 +01:00
a4b609fb6a
For utgate timing models, if hl/lh are not present use zl/zh/lz/hz to give a more accurate tristate delay.
2022-12-19 12:41:18 +01:00
021982799e
More conservative delay estimates for timing model type ugff.
2022-12-19 12:40:50 +01:00
11f6eace68
For dff/jkff, obtain more conservative estimates for clk_delay, set_delay and reset_delay.
2022-12-19 12:40:06 +01:00
cc8b651562
re-enable making old app nutmeg
2022-12-11 15:47:22 +01:00
d4fcef9bf6
Repair the broken --enable-oldapps option
2022-12-11 15:47:05 +01:00
e28d3feee0
Remove unused variable debarr.
...
Add another example.
2022-12-11 15:39:10 +01:00
6c1be283a7
Add a function ddt (derivative versus time) to the B-source funtion parser.
2022-12-11 15:38:22 +01:00
47260e2eb8
Rewrite extract_model_param.
2022-12-11 15:38:08 +01:00
0924fbb7eb
Modify the delay calculation for non-conforming timing model in .subckt CD4572UB.
2022-12-11 15:37:34 +01:00
a5eaac128a
For monotonic plotting find out the majority of increasing or decreasing
...
x-axis values, add a warning to add 'retraceplot' to plot all if more than
10% of the values deviate from the majority.
2022-12-11 15:37:14 +01:00
9613625840
Prevent seg fault after strange input like
...
*no circuit
.save all
.probe alli
.op
.end
2022-12-11 15:36:22 +01:00
744002dc49
fix sigfault on older c compilers
2022-12-11 15:35:53 +01:00
7ead974a5a
Prevent crash when cm_analog_set_temp_bkpt() is called during OPtran().
2022-12-11 15:35:31 +01:00
73e8fed0fc
Fix warnings from gcc 10.2.1.
2022-12-11 15:35:14 +01:00
929d1f5190
Added xor/xnor for logicexp timing models.
2022-12-11 15:34:56 +01:00
7ff8f3773f
Handle cases where logicexp has a timing model but no pindly. This is rare, only 22 tests from the digital libraries. Move digital examples, add missing .spiceint file.
2022-12-11 15:34:33 +01:00
a0cf65ca1a
Add B-source note
2022-12-11 15:33:24 +01:00
631ff35c34
The 8th parameter on a voltage or current source now is 'number of pulses'.
...
Previous usage had been PHASE, introduced by XSPICE, which has
been redundant to DELAY. PHASE is again available when compatibility flag
xs has been set.
2022-12-11 15:32:51 +01:00
e967b31c94
Add a new compatibility mode xs (for XSPICE)
2022-12-11 15:32:30 +01:00
27fb6cd0a6
Allow resetting the limit for warning mesaages, when a new run is started.
2022-12-11 15:32:11 +01:00
8e175f1e77
Replace obscure warning "singular matrix: check nodes mymode1 and mynode1" by
...
"singular matrix: check node mynode1", if both node names are equal.
2022-12-11 15:31:41 +01:00
1511214874
Add more debug instrumentation.
2022-12-11 15:31:09 +01:00
fe733a8ca2
Use tilde '~' inputs instead of creating inverters.
2022-12-11 15:30:41 +01:00
59e28ac2a2
Remove mentioning line number 0, which has been incomprehensible.
2022-12-11 15:30:12 +01:00
59413a7f71
Add error messages when controlled_exit is called:
...
No exit without message.
2022-12-11 15:29:47 +01:00
75c2a3c621
calculate log frequency sweep such that start frequency and stop frequency are always exactly included
2022-12-11 15:29:19 +01:00
c5d5da15ee
fix: allow hicum/l2 to compile with older c++ compilers
2022-12-11 15:28:59 +01:00
f13aa89626
Add new functions for operators x**y or x^y
...
compatmode hs: x>0 pow(x, y), x<0 pow(x, round(y)), X=0 0
compatmode lt: x>0 pow(x, y), x<0 pow(x, y) if y is close to integer, else 0
2022-12-11 15:27:26 +01:00
d0f686727d
Add new functions for operators x**y or x^y
...
compatmode hs: x>0 pow(x, y), x<0 pow(x, round(y)), X=0 0
compatmode lt: x>0 pow(x, y), x<0 pow(x, y) if y is close to integer, else 0
2022-12-11 15:27:02 +01:00
9932a78e39
Add safety braces.
2022-12-11 15:26:42 +01:00
5726c9ff0b
Tidy up debug tracing code.
2022-12-11 15:26:16 +01:00
aa2f3b7bbb
Fix memory leaks.
2022-12-11 15:25:52 +01:00
4294f49968
Add more vectors to behavioral 283 circuit. Add tristate buffer circuit which shows glitches until inertial delays are implemented.
2022-12-11 15:25:24 +01:00
cefa6b380c
When the gen_tab has only one entry, do not call optimize_gen_tab, it is not necessary.
2022-12-11 15:25:00 +01:00
029df5a3d6
Check that the bparse gen_tab optimization loop finishes when no more improvements occur.
2022-12-11 15:24:35 +01:00
6af73bc97f
remove unused
2022-12-11 15:24:04 +01:00
d77e36dc1b
To find the nearest integer, use nearbyint(). trunc() has delivered
...
only one-sided answers.
2022-12-11 15:23:20 +01:00
47f2b7c6af
AlmostEqualUlps setting has been too strict: it failed in MINGW gcc.
...
3 --> 10
2022-12-11 15:22:54 +01:00
ba6ff75dab
Trim trailing spaces
2022-12-11 15:22:30 +01:00
f26c9146f5
Don't allocate memory for control array at every time step
...
Use loc instead, setting it up once during INIT
2022-12-11 15:22:01 +01:00
aff20b9db1
Remove asserts, replace fixed size lexer_buf.
2022-12-11 15:21:09 +01:00
d54c1fc091
Add pindly tristate example. Cleanup error handling.
2022-12-11 15:20:27 +01:00
0627af435a
Remove most asserts.
2022-12-11 15:20:03 +01:00
b142be7fde
Add behavioral (LOGICEXP, PINDLY) test for 283 circuit. There are glitches in the simulation for some of the s* outputs. Probably due to not having inertial delays. And why not set 'zero' delays as close to zero as permitted by XSPICE.
2022-12-11 15:19:39 +01:00
4e76586b6b
Reduce the delays of 'zero' delay gates to 1.0e-11. Add decoder test for logicexpr and pindly.
2022-12-11 15:19:17 +01:00
13c01abf0d
Fix a typo, add more comments.
2022-12-11 15:18:52 +01:00
68f0d49f58
Add support for TRISTATE: in PINDLY.
2022-12-11 15:18:32 +01:00
363179ce2f
Fix potential memory leak, clean out debug code.
2022-12-11 15:18:12 +01:00
499bef097e
Better estimates of rise/fall delays in PINDLYs with outputs separated by CASE.
2022-12-11 15:17:51 +01:00
a01edf2f36
Fix visualc compiler warnings.
2022-12-11 15:17:33 +01:00
22a3af8a1e
Improve delay estimates for pindly output buffers.
2022-12-11 15:17:17 +01:00
64c2c1ee05
Initial handling of PINDLY. Output buffers without rise/fall delay estimates.
2022-12-11 15:16:57 +01:00
62aab3885d
Move f_logicexp, f_pindly calls to u_process_instance. Use u_add_instance to copy gate instances and models to the replacement cards.
2022-12-11 15:16:37 +01:00
7c699a599f
Fix potential memory leak.
2022-12-11 15:16:20 +01:00
a54aa4d1f7
Initial logicexp parser and gate generator.
2022-12-11 15:16:02 +01:00
4a904cdf18
Add drive 0/1 for $d_lo/$d_hi.
2022-12-11 15:15:44 +01:00
e47049f31a
Add STATIC_VAR_TABLE locdata
...
Add CALLBACK cm_d_pwm_callback
Reserve memory for x, y arrays only once during INIT
2022-12-11 15:15:22 +01:00
f1165052ad
We are developing towards ngspice-39
2022-11-06 11:23:17 +01:00
14f42f805d
Add info on new function ngCM_Input_Path
2022-10-29 15:48:58 +02:00
eb70d81dab
Add function
...
char* ngCM_Input_Path(const char* path);
to shared ngspice API
to send file path for code model input files (e.g. dsource).
Such path cannot be extracted automatically when netlist has
been sent by ngSpice_Circ
2022-10-28 14:12:53 +02:00
4b15632f9b
Function ngSpice_Circ() may receive empty lines.
...
Skip these lines while setting the netlist.
2022-10-26 22:24:52 +02:00
97ee2d8047
Fix typo
2022-10-26 17:48:34 +02:00
7eafd48cc0
Add udevices.h to makefile.am for 'make dist'
2022-10-24 20:27:57 +02:00
a6c28e44ff
Add info on shared library
2022-10-24 17:04:45 +02:00
638a09b718
Make doxygen documentation complete as an example.
2022-10-22 19:51:32 +02:00
Giles Atkinson
Holger Vogt
Pascal Kuthe
dwarning
Brian Taylor
R. Timothy Edwards
Markus Mueller
Francesco Lannutti
holger