Merge branch 'master' into netgen-1.5

"-flat_namespace -undefined suppress -noprebind" to "-undefined
dynamic_lookup" which is what was done in magic, which has a
similar structure to netgen.

VERSION

@@ -1 +1 @@
-1.5.246
+1.5.264

base/ext.c

@@ -31,6 +31,8 @@ the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 #include "print.h"
 #include "hash.h"
 
+static int invlambda = 100;	/* Used in sim and prm files */
+
 void extCell(char *name, int filenum)
 {
   struct nlist *tp, *tp2;
@@ -450,7 +452,8 @@ void simCell(char *name, int filenum)
   struct nlist *tp, *tp2;
   struct objlist *ob, *ob2;
   char FileName[500], simclass;
-  short i;
+  char writeLine[1024], paramString[128];
+  short i, p, mult;
   double l, w, v;
 
   tp = LookupCellFile(name, filenum);
@@ -478,9 +481,9 @@ void simCell(char *name, int filenum)
   }
 
   /* print out header list */
-  /* distance units are multiplied by 100 (distances are in um) */
+  /* distance units are multiplied by invlambda */
 
-  FlushString("| units: 100    tech: scmos\n");
+  FlushString("| units: %d    tech: scmos\n", 100 * invlambda);
 
   /* now run through cell's contents, print instances */
   for (ob = tp->cell; ob != NULL; ob = ob->next) {
@@ -516,13 +519,17 @@ void simCell(char *name, int filenum)
 	 case CLASS_NPN:
 	    simclass = 'b';
 	    break;	
-	 default:
+	 case CLASS_SUBCKT:
+	 case CLASS_MODULE:
 	    simclass = 'x';
 	    break;	
+	 default:
+	    simclass = '|';
+	    break;	
       }
 
       if (simclass != 'x')
-         FlushString("%c", simclass);
+	 FlushString("%c", simclass);
 
       switch (tp2->class) {
 	 case CLASS_NMOS: case CLASS_NMOS4:
@@ -590,6 +597,115 @@ void simCell(char *name, int filenum)
 	    FlushString(" %g\n", v);   
 	    break;
 
+	 case CLASS_MODULE:
+	    *writeLine = 'x';
+	    *(writeLine + 1) = '\0';
+	    mult = 1;
+
+	    /* Important---Need to look up the cell definition;  if
+	     * the first pin is "drain" then it is a FET, and pins
+	     * get swapped from D-G-S-B to G-S-D-B.  Source and drain
+	     * are treated here as equivalent because the .sim format
+	     * has no concept of an asymmetric source and drain.
+	     */
+	    ob2 = tp2->cell;
+	    if ((*matchfunc)(ob2->next->name, "gate"))
+	    {
+	      strcat(writeLine, " ");
+	      strcat(writeLine, NodeAlias(tp, ob->next));
+	      strcat(writeLine, " ");
+	      strcat(writeLine, NodeAlias(tp, ob));
+	      ob2 = ob->next->next;
+	    }
+	    else
+	      ob2 = ob;
+
+	    while (ob2 != NULL) {
+	      strcat(writeLine, " ");
+	      strcat(writeLine, NodeAlias(tp, ob2));
+	      ob2 = ob2->next;
+	      if ((ob2 == NULL) || (ob2->type <= FIRSTPIN)) break;
+	    }
+
+	    if (ob2 && ob2->type == PROPERTY) {
+	       struct valuelist *vl;
+	       /* Only known parameters are L, W, X, and Y */
+	       for (p = 0;; p++) {
+	          vl = (struct valuelist *)(&(ob2->instance.props[p]));
+		  if (vl->type == PROP_ENDLIST) {
+	             strcat(writeLine, " l=1");   
+		     break;
+		  }
+		  else if ((*matchfunc)(vl->key, "L")) {
+	             v = vl->value.dval;
+	             sprintf(paramString, " l=%d", (int)(0.5 + (v * invlambda)));   
+	             strcat(writeLine, paramString);
+		     break;
+		  }
+	       }
+	       for (p = 0;; p++) {
+	          vl = (struct valuelist *)(&(ob2->instance.props[p]));
+		  if (vl->type == PROP_ENDLIST) {
+	             strcat(writeLine, " w=1");   
+		     break;
+		  }
+		  else if ((*matchfunc)(vl->key, "W")) {
+	             v = vl->value.dval;
+	             sprintf(paramString, " w=%d", (int)(0.5 + (v * invlambda)));   
+	             strcat(writeLine, paramString);
+		     break;
+		  }
+	       }
+	       for (p = 0;; p++) {
+	          vl = (struct valuelist *)(&(ob2->instance.props[p]));
+		  if (vl->type == PROP_ENDLIST) {
+	             strcat(writeLine, " x=0");   
+		     break;
+		  }
+		  else if ((*matchfunc)(vl->key, "X")) {
+	             i = vl->value.ival;
+	             sprintf(paramString, " x=%d", i);
+	             strcat(writeLine, paramString);
+		     break;
+		  }
+	       }
+	       for (p = 0;; p++) {
+	          vl = (struct valuelist *)(&(ob2->instance.props[p]));
+		  if (vl->type == PROP_ENDLIST) {
+	             strcat(writeLine, " y=0");   
+		     break;
+		  }
+		  else if ((*matchfunc)(vl->key, "Y")) {
+	             i = vl->value.ival;
+	             sprintf(paramString, " y=%d", i);
+	             strcat(writeLine, paramString);
+		  }
+	       }
+	       for (p = 0;; p++) {
+	          vl = (struct valuelist *)(&(ob2->instance.props[p]));
+		  if (vl->type == PROP_ENDLIST) {
+		     break;
+		  }
+		  else if ((*matchfunc)(vl->key, "M")) {
+		     if (vl->type == PROP_INTEGER)
+	                mult = vl->value.ival;
+		     else
+	                mult = vl->value.dval;
+		  }
+	       }
+	    }
+	    strcat(writeLine, " ");
+	    strcat(writeLine, tp2->name);   
+	    strcat(writeLine, "\n");   
+
+	    /* Multiple instances (M != 1) are written multiple times.
+	     * NF is ignored in favor of having a single device with
+	     * the total width.
+	     */
+	    for (i = 0; i < mult; i++)
+		FlushString(writeLine);
+	    break;
+
 	 default:
 	    FlushString("| unhandled component %s\n", tp2->name);   
 	    break;
@@ -626,6 +742,181 @@ int StrIsInt(char *s)
     return (1);
 }
 
+/*------------------------------------------------------*/
+/* Read a .prm format file.  This is specifically to	*/
+/* get the "device" lines that indicate how a SPICE	*/
+/* subcircuit model or a .sim "x" record needs to be	*/
+/* translated into a specific component type like a	*/
+/* FET, diode, resistor, etc.				*/
+/*------------------------------------------------------*/
+
+char *ReadPrm(char *fname, int *fnum)
+{
+  int filenum;
+  struct keyvalue *kvlist = NULL;
+  struct nlist *tp;
+
+  if ((filenum = OpenParseFile(fname, *fnum)) < 0) {
+    char name[MAX_STR_LEN];
+
+    SetExtension(name, fname, PRM_EXTENSION);
+    if (OpenParseFile(name, *fnum) < 0) {
+      Printf("Error in prm file read: No file %s\n",name);
+      *fnum = filenum;
+      return NULL;
+    }    
+  }
+
+  /* Make sure all .prm file reading is case INsensitive */
+  /* This is because the only reason to read a PRM file	 */
+  /* is to find all the subcircuit device types	so that	 */
+  /* a SPICE file can be read and a SIM file written.	 */
+
+  matchfunc = matchnocase;
+  matchintfunc = matchfile;
+  hashfunc = hashnocase;
+
+  CellDef(fname, filenum);
+
+  while (!EndParseFile()) {
+    char devicename[MAX_STR_LEN];
+    SkipTok(NULL);
+
+    if (EndParseFile()) break;
+    if (nexttok[0] == ';') continue;		/* Comment line */
+    else if (nexttok[0] == '\0') continue;	/* Blank line */
+    else if (match(nexttok, "lambda")) {
+      SkipTok(NULL);
+      invlambda = (int)(0.5 + (1.0 / atof(nexttok)));
+      SkipNewLine(NULL); /* skip any attributes */
+    }
+    else if (match(nexttok, "device")) {
+      SkipTok(NULL);
+      if (match(nexttok, "nfet")) {
+	 SkipTok(NULL);
+	 strcpy(devicename, nexttok);
+	 /* Create 4-terminal nfet subcircuit device record */
+	 if (LookupCellFile(devicename, filenum) == NULL) {
+	     CellDef(devicename, filenum);
+	     Port("drain");
+	     Port("gate");
+	     Port("source");
+	     Port("bulk");
+	     PropertyDouble(devicename, filenum, "l", 0.01, 0.0);
+	     PropertyDouble(devicename, filenum, "w", 0.01, 0.0);
+	     PropertyInteger(devicename, filenum, "nf", 0, 1);
+	     PropertyInteger(devicename, filenum, "m", 0, 1);
+	     SetClass(CLASS_MODULE);
+	     EndCell();
+	     ReopenCellDef(fname, filenum);
+	 }
+         LinkProperties(devicename, kvlist);
+         SkipNewLine(NULL); /* skip any attributes */
+      }
+      else if (match(nexttok, "pfet")) {
+	 SkipTok(NULL);
+	 strcpy(devicename, nexttok);
+	 /* Create 4-terminal pfet subcircuit device record */
+	 if (LookupCellFile(devicename, filenum) == NULL) {
+	     CellDef(devicename, filenum);
+	     Port("drain");
+	     Port("gate");
+	     Port("source");
+	     Port("well");
+	     PropertyDouble(devicename, filenum, "l", 0.01, 0.0);
+	     PropertyDouble(devicename, filenum, "w", 0.01, 0.0);
+	     PropertyInteger(devicename, filenum, "nf", 0, 1);
+	     PropertyInteger(devicename, filenum, "m", 0, 1);
+	     SetClass(CLASS_MODULE);
+	     EndCell();
+	     ReopenCellDef(fname, filenum);
+	 }
+         LinkProperties(devicename, kvlist);
+         SkipNewLine(NULL); /* skip various attributes */
+      }
+      else if (match(nexttok, "resistor")) {
+	 SkipTok(NULL);
+	 strcpy(devicename, nexttok);
+	 /* Resistor device has additional record for the value */
+	 /* (Need to do something with this. . . ?) */
+	 SkipTok(NULL);
+	 /* Create resistor subcircuit device record */
+         if (LookupCellFile(devicename, filenum) == NULL) {
+            CellDef(devicename, filenum);
+            Port("end_a");
+            Port("end_b");
+            PropertyDouble(devicename, filenum, "value", 0.01, 0.0);
+	    PropertyDouble(devicename, filenum, "l", 0.01, 0.0);
+	    PropertyDouble(devicename, filenum, "w", 0.01, 0.0);
+	    PropertyInteger(devicename, filenum, "m", 0, 1);
+            SetClass(CLASS_MODULE);
+            EndCell();
+            ReopenCellDef(fname, filenum);
+         }
+	 LinkProperties(devicename, kvlist);
+         SkipNewLine(NULL); /* skip various attributes */
+      }
+      else if (match(nexttok, "capacitor")) {
+	 SkipTok(NULL);
+	 strcpy(devicename, nexttok);
+	 /* Capacitor device has additional record for the value */
+	 /* (Need to do something with this. . . ?) */
+	 SkipTok(NULL);
+	 /* Create capacitor subcircuit device record */
+         if (LookupCellFile(devicename, filenum) == NULL) {
+            CellDef(devicename, filenum);
+            Port("top");
+            Port("bottom");
+            PropertyDouble(devicename, filenum, "value", 0.01, 0.0);
+	    PropertyDouble(devicename, filenum, "l", 0.01, 0.0);
+	    PropertyDouble(devicename, filenum, "w", 0.01, 0.0);
+	    PropertyInteger(devicename, filenum, "m", 0, 1);
+            SetClass(CLASS_MODULE);
+            EndCell();
+            ReopenCellDef(fname, filenum);  /* Reopen */
+         }
+	 LinkProperties(devicename, kvlist);
+         SkipNewLine(NULL);
+      }
+      else if (match(nexttok, "diode")) {
+	 SkipTok(NULL);
+	 strcpy(devicename, nexttok);
+	 /* Create diode subcircuit device record */
+         if (LookupCellFile(devicename, filenum) == NULL) {
+            CellDef(devicename, filenum);
+            Port("anode");
+            Port("cathode");
+	    PropertyInteger(devicename, filenum, "m", 0, 1);
+            SetClass(CLASS_MODULE);
+            EndCell();
+            ReopenCellDef(fname, filenum);  /* Reopen */
+         }
+	 LinkProperties(devicename, kvlist);
+         SkipNewLine(NULL);
+      }
+      else {
+	Printf("Unknown device type in .prm: '%s'\n", nexttok);
+        InputParseError(stderr);
+        SkipNewLine(NULL);
+      }
+    }
+    else {
+      /* Could spell out all the keywords used in .prm files    */
+      /* but probably not worth the effort.                     */
+      SkipNewLine(NULL);
+    }
+    DeleteProperties(&kvlist);
+  }
+  EndCell();
+  CloseParseFile();
+
+  tp = LookupCellFile(fname, filenum);
+  if (tp) tp->flags |= CELL_TOP;
+
+  *fnum = filenum;
+  return fname;
+}
+
 /*-------------------------*/
 /* Read a .sim format file */
 /*-------------------------*/
@@ -644,7 +935,7 @@ char *ReadSim(char *fname, int *fnum)
 
     SetExtension(name, fname, SIM_EXTENSION);
     if (OpenParseFile(name, *fnum) < 0) {
-      Printf("Error in ext file read: No file %s\n",name);
+      Printf("Error in sim file read: No file %s\n",name);
       *fnum = filenum;
       return NULL;
     }    
@@ -847,7 +1138,7 @@ char *ReadSim(char *fname, int *fnum)
     }
     else if (match(nexttok, "r")) {	/* 2-port resistors */
       if (IgnoreRC) {
-	/* ignore all capacitances */
+	/* ignore all resistances */
 	SkipNewLine(NULL);
       }
       else {

base/flatten.c

@@ -136,17 +136,16 @@ void flattenCell(char *name, int file)
 	    ob2 = ob2->next;
 	}
     
-
       /* delete all port elements from child */
       while (IsPort(ChildObjList)) {
 	/* delete all ports at beginning of list */
 	if (Debug) Printf("deleting leading port from child\n");
 	tmp = ChildObjList->next;
 	FreeObjectAndHash(ChildObjList, ChildCell);
-	ChildObjList = tmp;
+        if ((ChildObjList = tmp) == NULL) break;
       }
       tmp = ChildObjList;
-      while (tmp->next != NULL) {
+      while (tmp && (tmp->next != NULL)) {
 	if (IsPort(tmp->next)) {
 	  ob2 = (tmp->next)->next;
 	  if (Debug) Printf("deleting a port from child\n");
@@ -536,11 +535,10 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
 
          /* Do property inheritance */
 
-         /* NOTE:  Need to do:  Check properties for M > 1 and decrement
-          * and repeat without moving CurrentProp
-          */
-
          if (CurrentProp) {
+	    int i, mval;
+	    struct valuelist *kv;
+
             for (ob2 = ChildStart; ob2 != NULL; ob2=ob2->next) {
 
 	       /* If the parent cell has properties to declare, then	*/
@@ -548,10 +546,49 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
 	       /* spiceparams dictionary is active (during file		*/
 	       /* reading only).					*/
 
-	       if (ob2->type == PROPERTY)
+	       if (ob2->type == PROPERTY) {
 		  ReduceExpressions(ob2, CurrentProp, ChildCell,
 				(spiceparams.hashtab == NULL) ? 0 : 1);
-            }
+	       }
+	    }
+
+	    /* Check for property M.  If it exists and is greater than	*/
+	    /* one, reduce it and repeat;  i.e., generate multiple	*/
+	    /* child instances to match the M value.  Probably this	*/
+	    /* could be done quicker by just creating a new property	*/
+	    /* M for a single child.					*/
+
+	    mval = 0;
+	    for (i = 0; ; i++) {
+	       kv = &(CurrentProp->instance.props[i]);
+	       if (kv->type == PROP_ENDLIST) break;
+	       if ((*matchfunc)(kv->key, "M")) {
+		   if (kv->type == PROP_INTEGER) {
+		      mval = kv->value.ival;
+		      kv->value.ival = mval - 1;
+		      break;
+		   }
+		   else if (kv->type == PROP_DOUBLE) {
+		      mval = (int)kv->value.dval;
+		      kv->value.dval = (double)mval - 1;
+		      break;
+		   }
+	       }
+	    }
+	    if (mval > 1) {
+	       /* Put the child cell at the start of ChildObjList */
+	       if (ChildEnd) {
+	          ChildEnd->next = ChildObjList;
+	          ChildObjList = ChildStart;
+	
+	          /* Continue without moving CurrentProp */
+		  /* Note that if ChildEnd is NULL then the child cell
+		   * is optimized out and there is no need to do it
+		   * M times.
+		   */
+	          continue;
+	       }
+	    }
 
             /* Repeat for each property record, as each property represents a
              * unique instance that must be flattened individually.
@@ -1177,7 +1214,6 @@ int UniquePins(char *name, int filenum)
    firstport = (struct objlist **)CALLOC(maxnode + 1, sizeof(struct objlist *));
 
    portcount = FIRSTPIN;
-   lob = NULL;
    for (ob = ThisCell->cell; ob != NULL; ob = ob->next) {
       if (ob->type != PORT) break;
       if (ob->node > 0) {
@@ -1188,16 +1224,12 @@ int UniquePins(char *name, int filenum)
 			firstport[ob->node]->name, ThisCell->name, ThisCell->file);
 	       /* Do not count this as a duplicate pin. */
 	       nodecount[ob->node]--;
-	       /* Move the pin adjacent to the one it is shorted to (if it	
-		* isn't already);  this will make the work of MatchPins() easier.
+	       /* Note:  Previously there was code here to move the shorted port
+		* next to the pin it is shorted to.  This causes the cell def pins
+		* to become scrambled with respect to the pin order of its instances.
+		* Removed the code 9/1/2023.  But---Not sure if any code depends
+		* on shorted pins being adjacent.
 		*/
-	       if (firstport[ob->node]->next != ob) {
-	          lob->next = ob->next;
-	          ob->next = firstport[ob->node]->next;
-		  firstport[ob->node]->next = ob;
-	          ob = lob;
-	       }
-	       lob = ob;
 	       continue;
 	    }
 	    else {
@@ -1218,7 +1250,6 @@ int UniquePins(char *name, int filenum)
 	 }
       }
       portcount++;
-      lob = ob;
    }
 
    if (needscleanup)
@@ -1600,6 +1631,7 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
     ECompList *list0X, *listX0;
     int hascontents1, hascontents2;
     int match, modified = 0;
+    int not_top;
 
     if (file1 == -1)
 	tc1 = LookupCell(name1);
@@ -1870,6 +1902,8 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
     // Remove non-matching zero-value devices.  This can
     // be done on a per-instance basis.
 
+    not_top = (PeekCompareQueueTop(NULL, NULL, NULL, NULL) == -1) ? FALSE : TRUE;
+
     ecomp = (ECompare *)HashFirst(&compdict);
     while (ecomp != NULL) {
 	if ((ecomp->num1 != ecomp->num2) && (ecomp->cell1 != NULL) &&
@@ -1916,6 +1950,33 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
 						    break;
 					    }
 					}
+
+					/* Do NOT remove shorting devices that	*/
+					/* connect two ports.  Otherwise the	*/
+					/* port lists get screwed up.  It is	*/
+					/* better in that case to force the	*/
+					/* cells to be declared mismatched.	*/
+					/* This is ignored for a top-level cell	*/
+					/* because it will just show up as a	*/
+					/* port mismatch error as it should.	*/
+
+					if ((not_top == TRUE) &&
+						(ecomp->cell1->class != CLASS_ISOURCE)) {
+					    int found1 = FALSE;
+					    int found2 = FALSE;
+					    for (ob2 = tc1->cell; ob2; ob2 = ob2->next) {
+						if (!IsPort(ob2)) break;
+						else if (ob2->node == node1)
+						    found1 = TRUE;
+						else if (ob2->node == node2)
+						    found2 = TRUE;
+						if (found1 && found2) {
+						    found = FALSE;
+						    break;
+						}
+					    }
+					}
+
 					if (found) break;
 				    }
 				    if (found) {
@@ -1929,6 +1990,16 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
 
 					if (ecomp->cell1->class != CLASS_ISOURCE) {
 					    /* merge node of endpoints */
+					    /* Prefer a port node over a non-port node */
+					    for (ob2 = tc1->cell; ob2; ob2 = ob2->next) {
+						if (!IsPort(ob2)) break;
+						else if (ob2->node == node1) break;
+						else if (ob2->node == node2) {
+						    int ntemp = node1;
+						    node1 = node2;
+						    node2 = ntemp;
+						}
+					    }
 					    for (ob2 = tc1->cell; ob2; ob2 = ob2->next) {
 						if (ob2->node == node2)
 						    ob2->node = node1;
@@ -2027,6 +2098,27 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
 						    break;
 					    }
 					}
+
+					/* (See comments above about removing shorts */
+					/* between two ports.)			     */
+
+					if ((not_top == TRUE) &&
+						(ecomp->cell2->class != CLASS_ISOURCE)) {
+					    int found1 = FALSE;
+					    int found2 = FALSE;
+					    for (ob1 = tc2->cell; ob1; ob1 = ob1->next) {
+						if (!IsPort(ob1))  break;
+						else if (ob1->node == node1)
+						    found1 = TRUE;
+						else if (ob1->node == node2)
+						    found2 = TRUE;
+						if (found1 && found2) {
+						    found = FALSE;
+						    break;
+						}
+					    }
+					}
+					
 					if (found) break;
 				    }
 				    if (found) {
@@ -2037,6 +2129,16 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
 
 					/* merge node of endpoints */
 					if (ecomp->cell2->class != CLASS_ISOURCE) {
+					    /* Prefer a port node over a non-port node */
+					    for (ob1 = tc2->cell; ob1; ob1 = ob1->next) {
+						if (!IsPort(ob1)) break;
+						else if (ob1->node == node1) break;
+						else if (ob1->node == node2) {
+						    int ntemp = node1;
+						    node1 = node2;
+						    node2 = ntemp;
+						}
+					    }
 					    for (ob1 = tc2->cell; ob1; ob1 = ob1->next) {
 						if (ob1->node == node2)
 						    ob1->node = node1;

base/inetcomp.c

@@ -17,6 +17,7 @@ along with this program; see the file copying.  If not, write to
 the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 /* inetcomp.c -- a simple wrapper to the NETCOMP() function */
+#include "config.h"
 
 #include <stdio.h>
 #include "netgen.h"

base/netcmp.c

@@ -17,7 +17,6 @@ along with this program; see the file copying.  If not, write to
 the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 /* netcmp.c  -- graph isomorphism testing */
-
 #include "config.h"
 
 #include <stdio.h>
@@ -3774,20 +3773,23 @@ int CreateCompareQueue(char *name1, int file1, char *name2, int file2)
    return 0;
 }
 
-/*----------------------------------------------*/
-/* Read the top of the compare queue, but do	*/
-/* not alter the stack.				*/
-/*----------------------------------------------*/
+/*----------------------------------------------------------------*/
+/* Read the top of the compare queue, but do not alter the stack. */
+/* Return -1 if there is no compare queue.  This is a way to	  */
+/* check if the current cells being checked are the topmost in	  */
+/* the queue.  Call with all NULL values for a quick check for a  */
+/* top-level compare.						  */
+/*----------------------------------------------------------------*/
 
 int PeekCompareQueueTop(char **name1, int *file1, char **name2, int *file2)
 {
    if (CompareQueue == NULL)
       return -1;
 
-   *name1 = CompareQueue->class1;
-   *file1 = CompareQueue->file1;
-   *name2 = CompareQueue->class2;
-   *file2 = CompareQueue->file2;
+   if (name1) *name1 = CompareQueue->class1;
+   if (file1) *file1 = CompareQueue->file1;
+   if (name2) *name2 = CompareQueue->class2;
+   if (file2) *file2 = CompareQueue->file2;
 
    return 0;
 }
@@ -4329,6 +4331,7 @@ void series_sort(struct objlist *ob1, struct nlist *tp1, int idx1, int run)
 
    // Re-sort list
    obp = ob1;
+   for (i = 0; i < idx1; i++) obp = obp->next;
    for (i = 0; i < run; i++) {
       obp->next = proplist[i].ob;
       obp = obp->next;
@@ -4532,6 +4535,7 @@ void parallel_sort(struct objlist *ob1, struct nlist *tp1, int idx1, int run)
 
    // Re-sort list
    obp = ob1;
+   for (i = 0; i < idx1; i++) obp = obp->next;
    for (i = 0; i < run; i++) {
       obp->next = proplist[i].ob;
       obp = obp->next;
@@ -5027,21 +5031,30 @@ int PropertyOptimize(struct objlist *ob, struct nlist *tp, int run, int series,
 	       switch(vl->type) {
 		  case PROP_DOUBLE:
 		  case PROP_VALUE:
-		     dval = 2 * fabs(vl->value.dval - vl2->value.dval)
+	       	     if ((vl2->type == PROP_DOUBLE) || (vl2->type == PROP_VALUE)) {
+			dval = 2 * fabs(vl->value.dval - vl2->value.dval)
 				/ (vl->value.dval + vl2->value.dval);
-		     if (dval <= kl->slop.dval) pmatch++;
+			if (dval <= kl->slop.dval) pmatch++;
+		     }
 		     break;
 		  case PROP_INTEGER:
-		     ival = abs(vl->value.ival - vl2->value.ival);
-		     if (ival <= kl->slop.ival) pmatch++; 
+		     if (vl2->type == PROP_INTEGER) {
+			ival = abs(vl->value.ival - vl2->value.ival);
+			if (ival <= kl->slop.ival) pmatch++; 
+		     }
 		     break;
 		  case PROP_STRING:
-		     if ((*matchfunc)(vl->value.string, vl2->value.string)) pmatch++;
+		     if (vl2->type == PROP_STRING) {
+			if ((*matchfunc)(vl->value.string, vl2->value.string)) pmatch++;
+		     }
 		     break;
 
-		  /* will not attempt to match expressions, but it could
+		  /* Will not attempt to match expressions, but it could
 		   * be done with some minor effort by matching each
 		   * stack token and comparing those that are strings.
+		   * Likewise, will not attempt to match properties
+		   * whose types are mismatched, but they could be
+		   * promoted here.
 		   */
 	       }
 	    }
@@ -7069,12 +7082,15 @@ int IgnoreClass(char *name, int file, unsigned char type)
 /* If file1 and file2 are -1, then these are names to	*/
 /* be checked as netcmp works through the hierarchy.  	*/
 /* Otherwise, look up the structure for each file and	*/
-/* set the classhash of the second to that of the first	*/
+/* set the classhash of the second to that of the	*/
+/* first.  If "dounique" is 1, then give the two cells	*/
+/* their own class hash;  they will not be compared	*/
+/* any other cells in either netlist.			*/
 /*							*/
 /* Return 1 on success, 0 on failure			*/
 /*------------------------------------------------------*/
 
-int EquivalenceClasses(char *name1, int file1, char *name2, int file2)
+int EquivalenceClasses(char *name1, int file1, char *name2, int file2, int dounique)
 {
    char *class1, *class2;
    struct Correspond *newc;
@@ -7099,16 +7115,19 @@ int EquivalenceClasses(char *name1, int file1, char *name2, int file2)
       if (tp->flags & CELL_DUPLICATE)
 	 reverse = 1;
 
-      /* Do a cross-check for each name in the other netlist.  If 	*/
-      /* conflicting names exist, then alter the classhash to make it	*/
-      /* unique.  In the case of duplicate cells, don't do this.	*/
+      if (dounique) {
 
-      if (!(tp->flags & CELL_DUPLICATE) && !(tp2->flags & CELL_DUPLICATE) &&
+	 /* Do a cross-check for each name in the other netlist.  If 	*/
+	 /* conflicting names exist, then alter the classhash to make 	*/
+	 /* it unique.  In the case of duplicate cells, don't do this.	*/
+
+	 if (!(tp->flags & CELL_DUPLICATE) && !(tp2->flags & CELL_DUPLICATE) &&
 			!(*matchfunc)(name1, name2)) {
-	 tpx = LookupCellFile(name1, file2);
-	 if (tpx != NULL) need_new_seed = 1;
-	 tpx = LookupCellFile(name2, file1);
-	 if (tpx != NULL) need_new_seed = 1;
+	    tpx = LookupCellFile(name1, file2);
+	    if (tpx != NULL) need_new_seed = 1;
+	    tpx = LookupCellFile(name2, file1);
+	    if (tpx != NULL) need_new_seed = 1;
+	 }
       }
 
       /* Now make the classhash values the same so that these cells	*/
@@ -7423,6 +7442,8 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
    int result = 1, haspins = 0, notempty = 0;
    int hasproxy1 = 0, hasproxy2 = 0;
    int needclean1 = 0, needclean2 = 0;
+   int nomatch = 0;
+   int *correspond;
    char *ostr;
 #ifdef TCL_NETGEN
    Tcl_Obj *mlist, *plist1, *plist2;
@@ -7514,58 +7535,77 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
 		     obp = N2->object;
 		     j = 0;
 	             for (ob2 = tc2->cell; ob2 != NULL; ob2 = ob2->next, j++) {
+			nomatch = FALSE;
 	          	if ((IsPort(ob2)) && (ob2->node == obp->node)) {
 			   if (Debug == 0) {
 			      for (m = 0; m < left_col_end; m++) *(ostr + m) = ' ';
 			      for (m = left_col_end + 1; m < right_col_end; m++) *(ostr + m) = ' ';
 			      snprintf(ostr, left_col_end, "%s", ob1->name);
-			      if ((*matchfunc)(ob1->name, ob2->name))
+			   }
+			   if ((*matchfunc)(ob1->name, ob2->name)) {
+			      if (Debug == 0)
 			         snprintf(ostr + left_col_end + 1, left_col_end, "%s", ob2->name);
-			      else {
-				 /* Check remainder of ports to see if there is a name match on the
-				  * same net number (multiple ports tied to the same net)
-				  */
-				 struct objlist *ob3;
-				 for (ob3 = ob2->next, ++j; ob3 != NULL; ob3 = ob3->next, j++) {
-				     if ((IsPort(ob3)) && (ob3->node == ob2->node)) {
-					if ((*matchfunc)(ob3->name, ob1->name)) {
-					   ob2 = ob3;
+			   }
+			   else {
+			      /* Check remainder of ports to see if there is a name match on the
+			       * same net number (multiple ports tied to the same net)
+			       */
+			      struct objlist *ob3;
+			      for (ob3 = ob2->next, ++j; ob3 != NULL; ob3 = ob3->next, j++) {
+				  if ((IsPort(ob3)) && (ob3->node == ob2->node)) {
+				     if ((*matchfunc)(ob3->name, ob1->name)) {
+				        ob2 = ob3;
+					if (Debug == 0)
 			         	   snprintf(ostr + left_col_end + 1, left_col_end, "%s", ob2->name);
-					   break;
-					}
+					break;
 				     }
-				     else {
-					ob3 = NULL;
-					break;	/* All pins w/the same node should be together */
-				     }
-				 }
-				 if (ob3 == NULL) {
+				  }
+				  else {
+				     ob3 = NULL;
+				     break;	/* All pins w/the same node should be together */
+				  }
+			      }
+			      if (ob3 == NULL) {
+				 if (Debug == 0) {
 				    if (ob2->model.port == -1)
 				       snprintf(ostr + left_col_end + 1, left_col_end, "%s **Mismatch**", ob2->name);
 				    else
 				       snprintf(ostr + left_col_end + 1, left_col_end, "(no matching pin)");
-				    /* Pins with different names are on different nets,
-				     * so this should trigger an error return code.
-				     */
-				    result = 0;
 				 }
+				 nomatch = TRUE;
+				 /* Pins with different names are on different nets,
+				  * so this should trigger an error return code.
+				  */
+				 result = 0;
 			      }
+			   }
+
+			   if (Debug == 0) {
 			      for (m = 0; m < right_col_end + 1; m++)
 				 if (*(ostr + m) == '\0') *(ostr + m) = ' ';
 			      Fprintf(stdout, ostr);
 			   }
+			   else if (nomatch) {
+			      Fprintf(stderr, "No matching pin in cell %s for "
+					"cell %s pin %s\n",
+					tc2->name, tc1->name, ob1->name);
+			   }
 			   else {
 			      Fprintf(stdout, "Circuit %s port %d \"%s\""
 					" = cell %s port %d \"%s\"\n",
-					tc1->name, i, obn->name,
-					tc2->name, j, obp->name);
+					tc1->name, i, ob1->name,
+					tc2->name, j, ob2->name);
 			   }
 #ifdef TCL_NETGEN
 			   if (dolist) {
 		              Tcl_ListObjAppendElement(netgeninterp, plist1,
-					Tcl_NewStringObj(obn->name, -1));
-		              Tcl_ListObjAppendElement(netgeninterp, plist2,
-					Tcl_NewStringObj(obp->name, -1));
+					Tcl_NewStringObj(ob1->name, -1));
+			      if (nomatch)
+		 		 Tcl_ListObjAppendElement(netgeninterp, plist2,
+					Tcl_NewStringObj("(no matching pin)", -1));
+			      else
+				 Tcl_ListObjAppendElement(netgeninterp, plist2,
+					Tcl_NewStringObj(ob2->name, -1));
 			   }
 #endif
 			   ob2->model.port = i;		/* save order */
@@ -7676,6 +7716,8 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
    /* legal SPICE.						*/
 
    ob1 = tc1->cell;
+
+   correspond = (int *)CALLOC((tc1->nodename_cache_maxnodenum + 1), sizeof(int));
   
    for (i = 0; i < numorig; i++) {
       bangptr1 = strrchr(ob1->name, '!');
@@ -7718,7 +7760,7 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
 			(tc2->flags & CELL_PLACEHOLDER)) ||
 			(NodeClasses == NULL))) {
 
-	          ob2->model.port = i;		/* save order */
+	          ob2->model.port = i;			/* save order */
 	          *(cover + i) = (char)1;
 
 	          if (Debug == 0) {
@@ -7747,6 +7789,63 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
 	          if (bangptr2) *bangptr2 = '!';
 		  break;
 	       }
+	       else if ((ob1->node != -1) && (ob2->node != -1)) {
+		  /* Check for the case of ports on both sides being shorted
+		   * together.  That means that the nodes on both sides connect
+		   * only to ports, that they connect to the same number of ports,
+		   * and that each port pair has a matching name.
+		   */
+		  int onlyports = 1;
+		  struct objlist *oba, *obb;
+		  for (oba = tc1->cell; oba != NULL; oba = oba->next) {
+		     if ((oba->node == ob1->node) && (oba->type != PORT)) {
+			onlyports = 0;
+			break;
+		     } 
+		  }
+		  if (onlyports) {
+		     for (obb = tc2->cell; obb != NULL; obb = obb->next) {
+		        if ((obb->node == ob2->node) && (obb->type != PORT)) {
+			   onlyports = 0;
+			   break;
+		        } 
+		     }
+		  }
+		  if (onlyports) {
+		     if ((correspond[ob1->node] == 0) || (correspond[ob1->node] == ob2->node)) {
+
+		        correspond[ob1->node] = ob2->node;	/* remember corresponding node */
+	                ob2->model.port = i;			/* save order */
+	                *(cover + i) = (char)1;
+
+	                if (Debug == 0) {
+		           for (m = 0; m < left_col_end; m++) *(ostr + m) = ' ';
+		           for (m = left_col_end + 1; m < right_col_end; m++) *(ostr + m) = ' ';
+		           snprintf(ostr, left_col_end, "%s", ob1->name);
+		           snprintf(ostr + left_col_end + 1, left_col_end, "%s", ob2->name);
+		           for (m = 0; m < right_col_end + 1; m++)
+		              if (*(ostr + m) == '\0') *(ostr + m) = ' ';
+		           Fprintf(stdout, ostr);
+	                }
+	                else {
+		           Fprintf(stdout, "Circuit %s port %d \"%s\""
+					" = cell %s port %d \"%s\"\n",
+				tc1->name, i, ob1->name,
+				tc2->name, j, ob2->name);
+	                }
+#ifdef TCL_NETGEN
+	                if (dolist) {
+		           Tcl_ListObjAppendElement(netgeninterp, plist1,
+					Tcl_NewStringObj(ob1->name, -1));
+		           Tcl_ListObjAppendElement(netgeninterp, plist2,
+					Tcl_NewStringObj(ob2->name, -1));
+	                }
+#endif
+		     }
+	             if (bangptr2) *bangptr2 = '!';
+		     break;
+		  }
+	       }
 	    }
 	    if (bangptr2) *bangptr2 = '!';
 	    j++;
@@ -7755,6 +7854,7 @@ int MatchPins(struct nlist *tc1, struct nlist *tc2, int dolist)
       ob1 = ob1->next;
       if (bangptr1) *bangptr1 = '!';
    }
+   FREE(correspond);
 
    /* Find the end of the pin list in tc1, for adding proxy pins */
 

base/netcmp.h

@@ -38,7 +38,8 @@ extern int PermuteSetup(char *model, int filenum, char *pin1, char *pin2);
 extern int PermuteForget(char *model, int filenum, char *pin1, char *pin2);
 extern int EquivalenceElements(char *name1, int file1, char *name2, int file2);
 extern int EquivalenceNodes(char *name1, int file1, char *name2, int file2);
-extern int EquivalenceClasses(char *name1, int file1, char *name2, int file2);
+extern int EquivalenceClasses(char *name1, int file1, char *name2, int file2,
+		int dounique);
 extern int IgnoreClass(char *name, int file, unsigned char type);
 extern int MatchPins(struct nlist *tp1, struct nlist *tp2, int dolist);
 extern int PropertyOptimize(struct objlist *ob, struct nlist *tp, int run,

base/netfile.c

@@ -183,7 +183,6 @@ void CloseFile(char *filename)
 		fclose(outfile);
 }
 
-
 /* STUFF TO READ INPUT FILES */
 
 static char *line = NULL;	/* actual line read in */
@@ -207,6 +206,21 @@ struct hashdict *definitions = (struct hashdict *)NULL;
 
 #define WHITESPACE_DELIMITER " \t\n\r"
 
+/*----------------------------------------------------------------------*/
+/* Seek and Tell on infile stream, for use with handling generate	*/
+/* loops in verilog.							*/
+/*----------------------------------------------------------------------*/
+
+void SeekFile(long offset)
+{
+    fseek(infile, offset, SEEK_SET);
+}
+
+long TellFile()
+{
+    return ftell(infile);
+}
+
 /*----------------------------------------------------------------------*/
 /* TrimQuoted() ---							*/
 /* Remove spaces from inside single- or double-quoted strings.		*/
@@ -597,7 +611,8 @@ void SpiceTokNoNewline(void)
 }
 
 /*----------------------------------------------------------------------*/
-/* Skip to the next token, ignoring any C-style comments.		*/
+/* Skip to the next token, ignoring any C-style comments and verilog	*/
+/* "(* ... *)"-style comments.						*/
 /*----------------------------------------------------------------------*/
 
 void SkipTokComments(char *delimiter)
@@ -613,6 +628,11 @@ void SkipTokComments(char *delimiter)
 		SkipTok(delimiter);
 	    if (nexttok) SkipTok(delimiter);
 	}
+	else if (match(nexttok, "(*")) {
+	    while (nexttok && !match(nexttok, "*)"))
+		SkipTok(delimiter);
+	    if (nexttok) SkipTok(delimiter);
+	}
 	else break;
     }
 }
@@ -717,7 +737,7 @@ char *strdtok(char *pstring, char *delim1, char *delim2)
     if (*s == '\\') {
         s++;
         while (*s != '\0') {
-	    if ((*s == ' ') || (*s == '\\')) {
+	    if ((*s == ' ') || ((*s == '\\') && (*(s + 1) == '\0'))) {
 		s++;
 		break;
 	    }
@@ -866,7 +886,7 @@ char *ReadNetlist(char *fname, int *fnum)
   };
   
 #ifdef mips
-  struct filetype formats[7];
+  struct filetype formats[8];
 
   formats[0].extension = NTK_EXTENSION;
   formats[0].proc = ReadNtk;
@@ -874,14 +894,16 @@ char *ReadNetlist(char *fname, int *fnum)
   formats[1].proc = ReadExtHier;
   formats[2].extension = SIM_EXTENSION;
   formats[2].proc = ReadSim;
-  formats[3].extension = SPICE_EXTENSION;
-  formats[3].proc = ReadSpice;
-  formats[4].extension = NETGEN_EXTENSION;
-  formats[4].proc = ReadNetgenFile;
-  formats[5].extension = VERILOG_EXTENSION;
-  formats[5].proc = ReadVerilogFile;
-  formats[6].extension = NULL;
-  formats[6].proc = NULL;
+  formats[3].extension = PRM_EXTENSION;
+  formats[3].proc = ReadPrm;
+  formats[4].extension = SPICE_EXTENSION;
+  formats[4].proc = ReadSpice;
+  formats[5].extension = NETGEN_EXTENSION;
+  formats[5].proc = ReadNetgenFile;
+  formats[6].extension = VERILOG_EXTENSION;
+  formats[6].proc = ReadVerilogFile;
+  formats[7].extension = NULL;
+  formats[7].proc = NULL;
 
 #else  /* not mips (i.e. compiler with reasonable initializers) */
   
@@ -890,6 +912,7 @@ char *ReadNetlist(char *fname, int *fnum)
       {NTK_EXTENSION, ReadNtk},
       {EXT_EXTENSION, ReadExtHier},
       {SIM_EXTENSION, ReadSim},
+      {PRM_EXTENSION, ReadPrm},
       {SPICE_EXTENSION, ReadSpice},
       {SPICE_EXT2, ReadSpice},
       {SPICE_EXT3, ReadSpice},

base/netfile.h

@@ -7,6 +7,7 @@
 #define WOMBAT_EXTENSION ".wom"
 #define EXT_EXTENSION ".ext"
 #define SIM_EXTENSION ".sim"
+#define PRM_EXTENSION ".prm"
 #define SPICE_EXTENSION ".spice"
 #define SPICE_EXT2 ".spc"
 #define SPICE_EXT3 ".sp"
@@ -47,5 +48,7 @@ extern void InputParseError(FILE *f);
 extern int OpenParseFile(char *name, int fnum);
 extern int EndParseFile(void);
 extern int CloseParseFile(void);
+extern void SeekFile(long offset);	/* handles verilog 'for' loops */
+extern long TellFile();			/* handles verilog 'for' loops */
 
 #endif /* _NETFILE_H */

base/netgen.h

@@ -191,6 +191,7 @@ extern char *ReadNtk (char *fname, int *fnum);
 extern char *ReadExtHier(char *fname, int *fnum);
 extern char *ReadExtFlat(char *fname, int *fnum);
 extern char *ReadSim(char *fname, int *fnum);
+extern char *ReadPrm(char *fname, int *fnum);
 extern char *ReadSpice(char *fname, int *fnum);
 extern char *ReadSpiceLib(char *fname, int *fnum);
 extern char *ReadNetgenFile (char *fname, int *fnum);

base/test.c

@@ -34,6 +34,8 @@ the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 #include "print.h"
 #endif
 
+extern void Finsert(FILE *f);
+
 void test_entry(void) 
 { 
 

base/verilog.c

@@ -42,6 +42,7 @@ the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 #include <stdio.h>
 #include <stdlib.h>  /* for calloc(), free(), getenv() */
+#include <ctype.h>   /* for isalnum() */
 #ifndef IBMPC
 #include <sys/types.h>	/* for getpwnam() tilde expansion */
 #include <pwd.h>
@@ -63,6 +64,7 @@ the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 #define VLOG_EQUATION_DELIMITERS "X///**/#((**)X,;:(){}[]=+-*/"
 #define VLOG_PIN_NAME_DELIMITERS "X///**/(**)X()"
 #define VLOG_PIN_CHECK_DELIMITERS "X///**/(**)X,;(){}"
+#define VLOG_INTEGER_DELIMITERS "X///**/X;[]"
 
 // Used by portelement structure "flags" record.
 #define PORT_NOT_FOUND	0
@@ -83,6 +85,16 @@ struct bus {
     int end;
 };
 
+// Global storage for a 'for' loop
+struct _loop {
+    char *loopvar;
+    int start;
+    int end;
+    long filepos;
+};
+
+struct _loop loop;
+
 // Free a bus structure in the hash table during cleanup
 
 int freebus (struct hashlist *p)
@@ -244,7 +256,16 @@ int EvalExpr(struct expr_stack **stackptr, int *valptr)
 
 	for (texp = start; texp; texp = texp->next) {
 	    if ((texp->last != NULL) && (texp->next != NULL) && (texp->oper != '\0')) {
-		if ((texp->last->oper == '\0') && (texp->next->oper == '\0')) {
+		/* Watch for (a)*b+c or a+b*(c);  multiplies must be solved first */
+		if ((texp->last->last != NULL) && ((texp->last->last->oper == '*')
+				|| (texp->last->last->oper == '/'))) {
+			/* Do nothing */
+		}
+		else if ((texp->next->next != NULL) && ((texp->next->next->oper == '*')
+				|| (texp->next->next->oper == '/'))) {
+			/* Do nothing */
+		}
+		else if ((texp->last->oper == '\0') && (texp->next->oper == '\0')) {
 		    if (texp->oper == '-') {
 			/* Subtract */
 			texp->last->value -= texp->next->value;
@@ -290,6 +311,7 @@ int EvalExpr(struct expr_stack **stackptr, int *valptr)
 		}
 	    }
 	}
+
     }
 
     /* If only one numerical item remains, then place it in valptr and return 1 */
@@ -311,6 +333,134 @@ int EvalExpr(struct expr_stack **stackptr, int *valptr)
     return 0;
 }
 
+//-------------------------------------------------------------------------
+// Parse an expression which must resolve to a single integer.
+// If it does, return "1" and put the integer in the return
+// pointer "iptr".  If not, return "0" and iptr is undefined.
+// The expression may use parameters, standard arithmetic,
+// and parenthetic grouping.  This routine does not tokenize input
+// but assumes that the entire expression is in the string "expr".
+//-------------------------------------------------------------------------
+
+int ParseIntegerExpression(char *expr, int *iptr)
+{
+    int result, value;
+    char *sptr, *cptr, savec;
+    struct property *kl = NULL;
+    struct expr_stack *stack, *newexp;
+
+    stack = NULL;
+    savec = '\0';
+    sptr = expr;
+    result = 1;
+
+    while (sptr && (*sptr != '\0')) {
+	// Move sptr to first non-space character
+	while (isspace(*sptr)) sptr++;
+
+	// Tokenize.  Look ahead to next delimeter and truncate string there.
+	cptr = sptr + 1;
+	if (isalnum(*sptr) || (*sptr == '_') || (*sptr == '$')) {
+	    while (*cptr != '\0') {
+		if (isalnum(*cptr)) cptr++;
+		else if ((*cptr == '_') || (*cptr == '$')) cptr++;
+		else break;
+	    }
+	}
+	savec = *cptr;
+	*cptr = '\0';
+
+	if (match(sptr, "+") || match(sptr, "-")
+	    	|| match(sptr, "*") || match(sptr, "/")
+	    	|| match(sptr, "(") || match(sptr, ")")) {
+	    newexp = (struct expr_stack *)MALLOC(sizeof(struct expr_stack));
+	    newexp->oper = *sptr;
+	    newexp->value = 0;
+	    newexp->next = NULL;
+	    newexp->last = stack;
+	    if (stack) stack->next = newexp;
+	    stack = newexp;
+
+	    sptr = cptr;
+	    *cptr = savec;
+	    continue;
+	}
+	if ((result = sscanf(sptr, "%d", &value)) != 1) {
+
+	    // Is name in the parameter list?
+	    kl = (struct property *)HashLookup(nexttok, &verilogparams);
+	    if (kl == NULL) {
+		Printf("Value %s in expression is not a number or a parameter.\n",
+				sptr);
+		value = 0;
+		break;
+	    }
+	    else {
+		if (kl->type == PROP_STRING) {
+		    result = sscanf(kl->pdefault.string, "%d", &value);
+		    if (result != 1) {
+		        Printf("Parameter %s has value %s that cannot be parsed"
+				" as an integer.\n",
+				nexttok, kl->pdefault.string);
+		    	value = 0;
+			break;
+		    }
+		}
+		else if (kl->type == PROP_INTEGER) {
+		    value = kl->pdefault.ival;
+		}
+		else if (kl->type == PROP_DOUBLE) {
+		    value = (int)kl->pdefault.dval;
+		    if ((double)value != kl->pdefault.dval) {
+		        Printf("Parameter %s has value %g that cannot be parsed"
+				" as an integer.\n",
+				nexttok, kl->pdefault.dval);
+		    	value = 0;
+			break;
+		    }
+		}
+		else {
+		    Printf("Parameter %s has unknown type; don't know how"
+				" to parse.\n", nexttok);
+		    value = 0;
+		    break;
+		}
+	    }
+	}
+
+	newexp = (struct expr_stack *)MALLOC(sizeof(struct expr_stack));
+	newexp->oper = '\0';
+	newexp->value = value;
+	newexp->next = NULL;
+	newexp->last = stack;
+	if (stack) stack->next = newexp;
+	stack = newexp;
+
+	/* Move to next token */
+	sptr = cptr;
+	*cptr = savec;
+    }
+
+    if (result != 0) {
+	if (stack == NULL) {
+	    Printf("Empty array found.\n");
+	    result = 0;
+	}
+	else if (EvalExpr(&stack, iptr) != 1) {
+	    Printf("Bad expression found in array.\n");
+	    result = 0;
+	}
+    }
+
+    /* In case of error, stack may need cleaning up */
+    while (stack != NULL) {
+	newexp = stack;
+	stack = stack->last;
+	FREE(newexp);
+    }
+    return result;
+}
+
 //-------------------------------------------------------------------------
 // Get bus indexes from the notation name[a:b].  If there is only "name"
 // then look up the name in the bus hash list and return the index bounds.
@@ -323,7 +473,6 @@ int EvalExpr(struct expr_stack **stackptr, int *valptr)
 int GetBusTok(struct bus *wb)
 {
     int result, start, end, value;
-    char oper;
     struct property *kl = NULL;
     struct expr_stack *stack, *newexp;
 
@@ -338,7 +487,6 @@ int GetBusTok(struct bus *wb)
 
     if (match(nexttok, "[")) {
 	start = end = -1;
-	oper = '\0';
 	while (nexttok) {
 	    SkipTokComments(VLOG_EQUATION_DELIMITERS);
     	    if (match(nexttok, "]")) {
@@ -467,13 +615,16 @@ int GetBusTok(struct bus *wb)
 
 //--------------------------------------------------------------------
 // GetBus() is similar to GetBusTok() (see above), but it parses from
-// a string instead of the input tokenizer.
+// a string instead of the input tokenizer, and expressions are not
+// allowed.
 //--------------------------------------------------------------------
 
 int GetBus(char *astr, struct bus *wb)
 {
     char *colonptr, *brackstart, *brackend, *sigend, sdelim, *aastr;
     int result, start, end;
+    struct property *kl = NULL;
+    struct expr_stack *stack, *newexp;
 
     if (wb == NULL) return 0;
     else {
@@ -531,7 +682,7 @@ int GetBus(char *astr, struct bus *wb)
 	*brackend = '\0';
 	colonptr = strvchr(aastr, ':');
 	if (colonptr) *colonptr = '\0';
-	result = sscanf(brackstart + 1, "%d", &start);
+	result = ParseIntegerExpression(brackstart + 1, &start);
 	if (colonptr) *colonptr = ':';
 	if (result != 1) {
 	    Printf("Badly formed array notation \"%s\"\n", astr);
@@ -539,7 +690,7 @@ int GetBus(char *astr, struct bus *wb)
 	    return 1;
 	}
 	if (colonptr)
-	    result = sscanf(colonptr + 1, "%d", &end);
+	    result = ParseIntegerExpression(colonptr + 1, &end);
 	else {
 	    result = 1;
 	    end = start;        // Single bit
@@ -866,16 +1017,17 @@ void ReadVerilogFile(char *fname, int filenum, struct cellstack **CellStackPtr,
   char devtype, in_module, in_param;
   char *eqptr, *matchptr;
   struct keyvalue *kvlist = NULL;
-  char inst[MAX_STR_LEN], model[MAX_STR_LEN], instname[MAX_STR_LEN], portname[MAX_STR_LEN], pkey[MAX_STR_LEN];
+  char inst[MAX_STR_LEN], model[MAX_STR_LEN], portname[MAX_STR_LEN], pkey[MAX_STR_LEN];
   struct nlist *tp;
   struct objlist *parent, *sobj, *nobj, *lobj, *pobj, *cref;
 
   inst[MAX_STR_LEN-1] = '\0';
   model[MAX_STR_LEN-1] = '\0';
-  instname[MAX_STR_LEN-1] = '\0';
   in_module = (char)0;
   in_param = (char)0;
 
+  loop.loopvar = NULL;
+
   while (!EndParseFile()) {
 
     SkipTokComments(VLOG_DELIMITERS); /* get the next token */
@@ -1416,6 +1568,145 @@ skip_endmodule:
 	while (!match(nexttok, ";")) SkipTok("X///**/X,;");
 	continue;
     }
+    else if (match(nexttok, "end")) {
+	/* Handle a 'for' loop */
+	if (loop.loopvar != NULL) {
+	    int loopval;
+	    struct property *klr;
+
+	    klr = (struct property *)HashLookup(loop.loopvar, &verilogparams);
+	    loopval = klr->pdefault.ival;
+
+	    if (loopval < loop.end) loopval++;
+	    else if (loopval > loop.end) loopval--;
+	    SeekFile(loop.filepos);
+	    if (loopval == loop.end)
+	    {
+		HashDelete(loop.loopvar, &verilogparams);
+		FREE(klr);
+		FREE(loop.loopvar);
+		loop.loopvar = NULL;
+	    }
+	    else
+		klr->pdefault.ival = loopval;
+	}
+	continue;
+    }
+    else if (match(nexttok, "begin") || match(nexttok, "generate")) {
+	/* 'generate' section or 'for' loop start is ignored */
+	continue;
+    }
+    else if (match(nexttok, "generate") || match(nexttok, "endgenerate")) {
+	/* 'generate' section is ignored */
+	continue;
+    }
+    else if (match(nexttok, "genvar")) {
+	while (!match(nexttok, ";")) SkipTok("X///**/X,;");
+	continue;
+    }
+    else if (match(nexttok, "for")) {
+	char limittype = '\0';
+	char *paramkey = NULL;
+	struct property *kl = NULL, *klr;
+	/* Parse out the loop variable and count.  Set the loop
+	 * variable as a parameter.  Find the beginning of the
+	 * loop block and record the file position so that the
+	 * block can be re-parsed for each loop iteration.
+	 */
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if ((nexttok == NULL) || !match(nexttok, "(")) {
+	    Printf("Badly formed 'for' loop.\n");
+	    FREE(paramkey);
+	    break;
+	}
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	/* Next token must be the loop variable */
+	if (nexttok == NULL) break;
+	paramkey = strsave(nexttok);
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if (!match(nexttok, "=")) {
+	    Printf("Badly formed 'for' loop.\n");
+	    FREE(paramkey);
+	    break;
+	}
+	SkipTokNoNewline(VLOG_INTEGER_DELIMITERS);
+	if (ParseIntegerExpression(nexttok, &ival) == 0) {
+	    FREE(paramkey);
+	    break;
+	}
+
+	kl = NewProperty();
+	kl->type = PROP_INTEGER;
+	kl->slop.ival = 0;
+	kl->pdefault.ival = ival;
+	kl->key = paramkey;
+	kl->idx = 0;
+	kl->merge = MERGE_NONE;
+
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if (!match(nexttok, ";")) {
+	    Printf("Badly formed 'for' loop.\n");
+	    FREE(paramkey);
+	    FREE(kl);
+	    break;
+	}
+
+	/* Assuming a standard 'for' loop here */
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if (!match(nexttok, paramkey)) {
+	    Printf("Don't know how to parse this 'for' loop!\n");
+	    FREE(paramkey);
+	    FREE(kl);
+	    break;
+	}
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if (strlen(nexttok) == 1) limittype = *nexttok;
+	SkipTokNoNewline(VLOG_INTEGER_DELIMITERS);
+	if (ParseIntegerExpression(nexttok, &ival) == 0) {
+	    FREE(kl);
+	    FREE(paramkey);
+	    break;
+	}
+
+	/* Loops will stop after the last value, so if value is > or <,
+	 * then adjust the end value accordingly.
+	 */
+	if (limittype == '<')
+	    ival--;
+	else if (limittype == '>')
+	    ival++;
+
+	SkipTokNoNewline(VLOG_DELIMITERS);
+	if (!match(nexttok, ";")) {
+	    Printf("Badly formed 'for' loop.\n");
+	    FREE(paramkey);
+	    FREE(kl);
+	    break;
+	}
+
+	/* Assume a standard 'for' loop and skip to the block begin	*/
+	/* To do:  Parse out the loop increment value.			*/
+	while (1) {
+	    SkipTokNoNewline(VLOG_DELIMITERS);
+	    if (EndParseFile()) break;
+	    else if (match(nexttok, "begin")) break;
+	}
+	if (EndParseFile()) {
+	    Printf("Badly formed 'for' loop:  No begin/end block.\n");
+	    FREE(paramkey);
+	    FREE(kl);
+	    break;
+	}
+
+	/* Save the loop variable, ending value, and file position */
+	loop.loopvar = paramkey;
+	loop.start = kl->pdefault.ival;
+	loop.end = ival;
+	loop.filepos = TellFile();
+
+	/* 'for' loop has been completely parsed, so save the loop variable */
+	HashPtrInstall(paramkey, kl, &verilogparams);
+    }
     else if (match(nexttok, "wire") || match(nexttok, "assign")) {	/* wire = node */
 	struct bus wb, wb2, *nb;
 	char nodename[MAX_STR_LEN], noderoot[MAX_STR_LEN];
@@ -1479,7 +1770,7 @@ skip_endmodule:
 	}
 	else {	    /* "assign" */
 	    SkipTokComments(VLOG_PIN_CHECK_DELIMITERS);
-	    if (GetBus(nexttok, &wb) == 0) {
+	    if (GetBusTok(&wb) == 0) {
 		char *aptr = strvchr(nexttok, '[');
 		if (aptr != NULL) {
 		    *aptr = '\0';
@@ -1514,9 +1805,11 @@ skip_endmodule:
 	//    "assign a = b" joins two nets.
 	//    "assign a = {b, c, ...}" creates a bus from components.
 	//    "assign" using any boolean arithmetic is not structural verilog.
+	//    "assign a = {x{b}}" creates a bus by repeating a component.
 
 	if (nexttok && match(nexttok, "=")) {
 	    char assignname[MAX_STR_LEN], assignroot[MAX_STR_LEN];
+	    int multiplier = 1;
 
 	    i = wb.start;
 	    while (1) {
@@ -1525,6 +1818,10 @@ skip_endmodule:
 
 		if (match(nexttok, "{")) {
 		    /* RHS is a bundle */
+		    /* Make provisional multiplier active.  NOTE:	*/
+		    /* this is not going to properly handle complex	*/
+		    /* multipliers like {2{a,b}}.  Needs rework.	*/
+		    if (multiplier < 0) multiplier = -multiplier;
 		    continue;
 		}
 		else if (match(nexttok, "}")) {
@@ -1540,7 +1837,7 @@ skip_endmodule:
 		    break;
 		}
 		else {
-		    if (GetBus(nexttok, &wb2) == 0) {
+		    if (GetBusTok(&wb2) == 0) {
 			char *aptr = strvchr(nexttok, '[');
 			j = wb2.start;
 			if (aptr != NULL) {
@@ -1556,6 +1853,18 @@ skip_endmodule:
 		    else {
 			j = -1;
 			rhs = LookupObject(nexttok, CurrentCell);
+
+			/* Check if rhs starts with a signal multiplier */
+			if (rhs == NULL) {
+			    if (ConvertStringToInteger(nexttok, &multiplier) == 1) {
+				/* Set multiplier to a negative value to
+				 * indicate that it is provisional, waiting on
+				 * signal specification to follow.
+				 */
+				multiplier = -multiplier;
+				continue;
+			    }
+			}
 		    }
 		    if ((lhs == NULL) || (rhs == NULL)) {
 			if (rhs != NULL) {
@@ -1568,7 +1877,7 @@ skip_endmodule:
 			    Printf("Improper expression is \"%s\".\n", nexttok);
 			    break;
 			}
-			if (lhs != NULL) {
+			if ((lhs != NULL) || (multiplier < 0)) {
 			    Printf("Improper assignment;  right-hand side cannot "
 					"be parsed.\n");
 			    if (i != -1)
@@ -1588,21 +1897,36 @@ skip_endmodule:
 			/* until bits in signal are exhausted or LHS is full.	    */
 
 			if (i != -1)
-			    sprintf(nodename, "%s[%d]", noderoot, i);
-			else
-			    sprintf(nodename, lhs->name);
+			    snprintf(nodename, MAX_STR_LEN, "%s[%d]", noderoot, i);
+			else if (lhs != NULL)
+			    strncpy(nodename, lhs->name, MAX_STR_LEN - 1);
+			else {
+			    Printf("Error:  Improper node name \"%s\".\n", noderoot);
+			    goto skip_endmodule;
+			}
 			if (j != -1)
-			    sprintf(assignname, "%s[%d]", assignroot, j);
-			else
-			    sprintf(assignname, rhs->name);
+			    snprintf(assignname, MAX_STR_LEN, "%s[%d]", assignroot, j);
+			else if (rhs != NULL)
+			    strncpy(assignname, rhs->name, MAX_STR_LEN - 1);
+			else {
+			    Printf("Error:  Improper assignment name \"%s\".\n",
+					assignroot);
+			    goto skip_endmodule;
+			}
 
 			join(nodename, assignname);
 
 			if (i == wb.end) break;
 			i += (wb.end > wb.start) ? 1 : -1;
 
-			if (j == wb2.end) break;
-			j += (wb2.end > wb2.start) ? 1 : -1;
+			if (j == wb2.end) {
+			    if (multiplier <= 1)
+			    	break;
+			    else
+				multiplier--;
+			}
+			else
+			    j += (wb2.end > wb2.start) ? 1 : -1;
 		    }
 		}
 	    }
@@ -1810,6 +2134,31 @@ nextinst:
 		     }
 		     new_port->net = wire_bundle;
 		  }
+		  else if ((strchr(nexttok, '[') != NULL) &&
+				(strchr(nexttok, ']') == NULL)) {
+		     /* If a bus expressions has whitespace, then treat it like
+		      * a bundle, above, concatenating to the closing ']'.
+		      */
+		     char *array_expr = (char *)MALLOC(1);
+		     char *new_array_expr = NULL;
+		     *array_expr = '\0';
+		     /* Read to "]" */
+		     while (nexttok) {
+			 new_array_expr = (char *)MALLOC(strlen(array_expr) +
+				    strlen(nexttok) + 1);
+			 /* Roundabout way to do realloc() becase there is no REALLOC() */
+			 strcpy(new_array_expr, array_expr);
+			 strcat(new_array_expr, nexttok);
+			 FREE(array_expr);
+			 array_expr = new_array_expr;
+			 if (strchr(nexttok, ']')) break;
+			 SkipTokComments(VLOG_PIN_CHECK_DELIMITERS);
+		     }
+		     if (!nexttok) {
+			 Printf("Unterminated net in pin %s\n", array_expr);
+		     }
+		     new_port->net = array_expr;
+		  }
 		  else if (nexttok[0] == '~' || nexttok[0] == '!' || nexttok[0] == '-') {
 		     /* All of these imply that the signal is logically manipulated */
 		     /* in turn implying behavioral code.			    */

netgen/inetcomp.c

@@ -17,6 +17,7 @@ along with this program; see the file copying.  If not, write to
 the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 /* inetcomp.c -- a simple wrapper to the NETCOMP() function */
+#include "config.h"
 
 #include <stdio.h>
 #include "netgen.h"

netgen/netcomp.c

@@ -17,6 +17,7 @@ along with this program; see the file copying.  If not, write to
 the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 /* netcomp.c -- a simple wrapper to provide netlist comparison functionality */
+#include "config.h"
 
 #include <stdio.h>
 #include "netgen.h"

netgen/netgen_main.c

@@ -23,6 +23,7 @@ the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 #include <stdlib.h>  /* for getenv */
 #endif
 #include "netgen.h"
+#include "print.h"
 
 int main(int argc, char **argv)
 {

netgen/ntk2xnf.c

@@ -20,9 +20,11 @@ along with this program; see the file copying.  If not, write to
 the Free Software Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
 
 /* ntk2xnf.c  -- a simple wrapper to translate .ntk to Xilinx XNF format */
+#include "config.h"
 
 #include <stdio.h>
 #include "netgen.h"
+#include "xilinx.h"
 
 #ifdef HAVE_X11
 /* the following two X procedures are to permit linking

scripts/configure

@@ -6302,7 +6302,7 @@ fi
 
     *darwin*)
       SHDLIB_EXT=".dylib"
-      LDDL_FLAGS="-dynamiclib -flat_namespace -undefined suppress -noprebind"
+      LDDL_FLAGS="-dynamiclib -undefined dynamic_lookup"
       LDFLAGS="${LDFLAGS} ${LIB_SPECS}"
       CFLAGS="${CFLAGS} ${X_CFLAGS} ${INC_SPECS} -I/sw/include -fno-common"
       ;;

scripts/configure.in

@@ -1033,7 +1033,7 @@ fi
 
     *darwin*)
       SHDLIB_EXT=".dylib"
-      LDDL_FLAGS="-dynamiclib -flat_namespace -undefined suppress -noprebind"
+      LDDL_FLAGS="-dynamiclib -undefined dynamic_lookup"
       LDFLAGS="${LDFLAGS} ${LIB_SPECS}"
       CFLAGS="${CFLAGS} ${X_CFLAGS} ${INC_SPECS} -I/sw/include -fno-common"
       ;;

tcltk/netgen.tcl.in

@@ -479,8 +479,12 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
 
    netgen::compare assign "$fnum1 $cell1" "$fnum2 $cell2"
 
-   if {[file exists $setupfile]} {
-      puts stdout "Reading setup file $setupfile"
+   if {$setupfile == ""} {
+      puts stdout "\nNo setup file specified.  Using trivial default setup.\n"
+      netgen::permute default	;# transistors and resistors
+      netgen::property default
+   } elseif {[file exists $setupfile]} {
+      puts stdout "\nReading setup file $setupfile\n"
       # Instead of sourcing the setup file, run each line so we can
       # catch individual errors and not let them halt the LVS process
       set perrors 0
@@ -508,8 +512,10 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
 	 puts stdout "Warning:  There were errors reading the setup file"
       }
    } elseif {[string first nosetup $setupfile] < 0} {
-      netgen::permute default	;# transistors and resistors
-      netgen::property default
+      puts stderr "\nError:  Setup file $setupfile does not exist.\n"
+      return
+   } else {
+      puts stderr "\nNo setup file specified.  Continuing without a setup.\n"
    }
 
    if {[string first nolog $logfile] < 0} {
@@ -735,6 +741,19 @@ set auto_noexec 1       ;# don't EVER call UNIX commands w/o "shell" in front
 # Cross-Application section
 #----------------------------------------------------------------------
 
+# For use with open_pdks, set PDK_ROOT from the environment.  If no
+# such environment variable exists, check some common locations.
+
+if {[catch {set PDK_ROOT $::env(PDK_ROOT)}]} {
+    if {[file isdir /usr/local/share/pdk] == 1} {
+	set PDK_ROOT /usr/local/share/pdk
+    } elseif {[file isdir /usr/share/pdk] == 1} {
+	set PDK_ROOT /usr/share/pdk
+    } elseif {[file isdir /foss/pdk] == 1} {
+	set PDK_ROOT /foss/pdk
+    }
+}
+
 # Setup IRSIM assuming that the Tcl version is installed.
 # We do not need to rename procedure irsim to NULL because it is
 # redefined in a script, which simply overwrites the original.

tcltk/tclnetgen.c

@@ -707,11 +707,11 @@ _netgen_readnet(ClientData clientData,
     Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])
 {
    char *formats[] = {
-      "automatic", "ext", "extflat", "sim", "ntk", "spice",
+      "automatic", "ext", "extflat", "sim", "prm", "ntk", "spice",
       "verilog", "netgen", "actel", "xilinx", NULL
    };
    enum FormatIdx {
-      AUTO_IDX, EXT_IDX, EXTFLAT_IDX, SIM_IDX, NTK_IDX,
+      AUTO_IDX, EXT_IDX, EXTFLAT_IDX, SIM_IDX, PRM_IDX, NTK_IDX,
       SPICE_IDX, VERILOG_IDX, NETGEN_IDX, ACTEL_IDX, XILINX_IDX
    };
    struct nlist *tc;
@@ -807,6 +807,9 @@ _netgen_readnet(ClientData clientData,
          case SIM_IDX:
             retstr = ReadSim(savstr, &filenum);
             break;
+         case PRM_IDX:
+            retstr = ReadPrm(savstr, &filenum);
+            break;
          case NTK_IDX:
             retstr = ReadNtk(savstr, &filenum);
             break;
@@ -2902,7 +2905,7 @@ _netcmp_equate(ClientData clientData,
    struct ElementClass *saveEclass = NULL;
    struct NodeClass *saveNclass = NULL;
    int file1, file2;
-   int i, l1, l2, ltest, lent, dolist = 0, doforce = 0;
+   int i, l1, l2, ltest, lent, dolist = 0, doforce = 0, dounique = 0;
    Tcl_Obj *tobj1, *tobj2, *tobj3;
 
    while (objc > 1) {
@@ -2918,6 +2921,11 @@ _netcmp_equate(ClientData clientData,
 	 objv++;
 	 objc--;
       }
+      else if (!strcmp(optstart, "unique")) {
+	 dounique = 1;
+	 objv++;
+	 objc--;
+      }
       else
 	 break;
    }
@@ -3342,19 +3350,9 @@ _netcmp_equate(ClientData clientData,
 		    return TCL_ERROR;
 		}
 	    }
-
-	    /* Now that all pins are assigned by name, reorder	*/
-	    /* the pin lists of the 2nd cell to match the	*/
-	    /* order of the 1st.				*/
-
-	    /* Reorder the pin lists of instances of the 2nd	*/
-	    /* cell to match the order of the 1st.		*/
-
-	    // pindata.cell2 = tp2;
-	    // RecurseCellHashTable2(pinorder, (void *)(&pindata));
 	 }
 
-	 if (EquivalenceClasses(tp1->name, file1, tp2->name, file2)) {
+	 if (EquivalenceClasses(tp1->name, file1, tp2->name, file2, dounique)) {
 	    Fprintf(stdout, "Device classes %s and %s are equivalent.\n",
 			tp1->name, tp2->name);
 	    Tcl_SetObjResult(interp, Tcl_NewBooleanObj(1));