Compare commits

..
88 Commits
Author SHA1 Message Date
Tim Edwards 813b29cdc4 Merge branch 'master' into netgen-1.5 2021-05-29 03:00:10 -04:00
Tim Edwards 00949970b4 The previous method change for sorting to accommodate capacitors and
other devices that do not have a "critical property" that determines
which properties can add together was flawed and messed up the sorting
of devices like transistors and resistors that do have a critical
property.  Reworked the sorting order so that it makes sense for both
situations.
2021-05-28 21:20:39 -04:00
Tim Edwards ccf4a0a900 Merge branch 'master' into netgen-1.5 2021-05-27 03:00:32 -04:00
Tim Edwards c83b6def5b Corrected an issue with swapped arguments to PromoteProperty().
Also corrected a superficial issue with an attempt to print out an
instance name that doesn't exist.  There is an underlying bug here
related to cells that have no pins and/or no contents which has not
been debugged.  The fix just keeps netgen from segfaulting.
2021-05-26 12:46:57 -04:00
Tim Edwards e34166fdb9 Merge branch 'master' into netgen-1.5 2021-05-26 03:00:32 -04:00
Tim Edwards 8fc2c097d2 Added one modification that automatically ignores any cell that has
no pins at all.  This overrides the default behavior of treating
empty cells as "black-box" entries, and avoids attempts to compare
cells like logo artwork.
2021-05-25 12:41:57 -04:00
Tim Edwards a13491e358 Merge branch 'master' into netgen-1.5 2021-05-25 03:00:09 -04:00
Tim Edwards 2ac2a3b6f8 Fixed a bad assumption; PropertyOptimize allows devices with
different additive properties (like transistor width) to combine;
this is totally wrong and may have been left over from code written
before the routine was split into simple combinations (add similar
devices) and agressive combinations (e.g., add widths together).
2021-05-24 10:05:10 -04:00
Tim Edwards 1d05b8b676 Merge branch 'master' into netgen-1.5 2021-05-20 03:00:31 -04:00
Tim Edwards 759d63cea9 Changed a comment in the code that no longer applies after the last
modification.
2021-05-19 16:42:03 -04:00
Tim Edwards 476da015f0 Added support for expression parameters to be added to a device
class during setup, for the purpose of generating some derived
value that is used for merging and sorting, such as area = l*w.
Note that this likely needs adjusting so that the expression is
evaluated but not replaced for the purpose of sorting, since the
values to the parameter may change after parallel and series
merging.
2021-05-19 16:27:52 -04:00
Tim Edwards 4aa8a72769 Corrected an error found in ResolveAutomorphsByProperty which would
cause inexplicable output in case of a property error by showing a
netlist topography error instead of a property error (but the output
shows that the netlists match, and there is no reporting of any
property errors).  This error was discovered while implementing a
better sorting method for parallel combination.  The improved method
sorts on two properties rather than one, and so should not fall into
the error where, say, devices are sorted on W but have different L
for a device like a capacitor where no "critical" property is
specified (and other similar cases, although that is a common one).
2021-05-19 14:56:38 -04:00
Tim Edwards e97d6f1aeb Merge branch 'master' into netgen-1.5 2021-05-14 03:00:10 -04:00
Tim Edwards 47e7367c26 Updated the versio with the last commit. 2021-05-13 15:58:49 -04:00
Tim Edwards 362fb7120b Modified the behavior of the parallel combination of devices with
"similar no connect" pins so that it is not done on top-level
netlists.  This is mainly to deal with the problem where connections
that would normally be pins (but may have, for example, been
connected to a voltage source in a schematic that was deleted because
it was not a netlistable device) are treated as no-connects.
The parallel combination of devices with similar no-connects can then
differ between netlists that differ in describing transistors as
fingered vs. individual devices.  This is an obscure case, but the
output of netgen then becomes not only wrong but difficult to
understand what happened, so it is better to avoid.
2021-05-13 15:50:12 -04:00
Tim Edwards fb4759a8cd Merge branch 'master' into netgen-1.5 2021-05-04 03:00:10 -04:00
Tim Edwards 92e8fed8be Corrected an error in checking merge flags when doing sorting of
parallel and series devices.  This was a fairly major error
undermining the property sorting (the case where the same number
of devices are in parallel in both circuits and need to be sorted
by, e.g., width, prior to checking for matches).
2021-05-03 11:20:44 -04:00
Tim Edwards 45d4004d43 Merge branch 'master' into netgen-1.5 2021-05-02 03:00:09 -04:00
Tim Edwards 01b2484be3 Updated version. 2021-05-01 22:49:59 -04:00
Tim Edwards fe47d84ace Missed a corner case in the series combination code where a device
has been shuffled to the beginning of the cell, which requires
different handling.
2021-05-01 22:48:59 -04:00
Tim Edwards 0b014e6efd Merge branch 'master' into netgen-1.5 2021-03-20 03:00:09 -04:00
Tim Edwards 0a2adeb593 Modified the "flatten" command to allow class "module" to be
flattened.  This is marginally useful---since the "module" class
is a black box, it is essentially the same as using the "ignore"
command.
2021-03-19 13:57:11 -04:00
Tim Edwards 330b34139c Slight modification to print the list of cells being forced to
match for both the filename option and immediate list.
2021-03-19 10:51:42 -04:00
Tim Edwards 62d0352149 Modified the "-noflatten" command option to "lvs" so that it can be
given a filename as a value in addition to being passed a list of
cells directly.
2021-03-19 09:41:42 -04:00
Tim Edwards 9ca713dfd9 Merge branch 'master' into netgen-1.5 2021-03-18 03:00:29 -04:00
Tim Edwards b1b04b8e87 Corrected a statement related to proxy pins that can cause a
segfault condition.
2021-03-17 16:31:22 -04:00
Tim Edwards 851a1f941e Merge branch 'master' into netgen-1.5 2021-03-06 03:00:09 -05:00
Tim Edwards 6b9d92de65 Corrected some pointer-to-int and int-to-pointer conversions to
keep the compiler happy.
2021-03-05 20:19:04 -05:00
Tim Edwards d763ad0e60 First and simplest (but most effective) cut at aligning the two
sides of the output when presenting side-by-side results.  This
matches up net or device names within a partition.  Where net or
device names match, the contents are also aligned on either side.
I attempted to also do a "best match" of contents between sides,
but as this involves a lot of analyzing the contents, it is very
computationally expensive, and so the code has been disabled.  It
could be added back in as an option.  There are also various ways
to optimize it for speed.
2021-03-05 17:23:22 -05:00
Tim Edwards fd72e24a86 Corrected an error in the code that handles no-connects as valid
pins for enabling parallel combinations, which could cause a crash.
Added a "-force" option to "equate pins" to allow pins to be matched
even on subcircuits that did not correctly match;  this was done in
conjuction with an extra option to the "lvs" command "-noflatten="
to pass a list of cellname to not be flattened even if they do not
match.  This is generally discouraged, as it prevents netgen from
resolving differences between layout and schematic hierarchy, but it
can be useful for checking that the hierarchy above a certain cell
is correct, given that if a subcell is really unmatched, then its
errors will keep propagating up the top level, making additional
errors hard to diagnose.
2021-03-05 11:32:17 -05:00
Tim Edwards 20077d3d56 Modifed the handling of parallelized no-connects so that the behavior
can be turned on or off from the setup using "property parallel open"
to allow parallelizing devices with no-connect pins vs. "property
parallel connected" to only allow parallelizing of devices with all
pins connected.
2021-03-03 17:31:45 -05:00
Tim Edwards fb798d6ce7 Merge branch 'master' into netgen-1.5 2021-03-03 03:00:12 -05:00
Tim Edwards a21ba820e9 Corrected a missing variable in a print statement in the SPICE read
routine that can cause a segfault.
2021-03-02 21:48:48 -05:00
Tim Edwards 792c5e569a Resolved the case mentioned in a prior commit where the case of N
devices in parallel with unconnected pins would be confused with
N devices in parallel with those pins all tied together.  This is
treated as a property error.
2021-03-02 16:49:03 -05:00
Tim Edwards f92192efd4 Corrected an error from yesterday's commit; the test case for
parallel combinations with disconnected nodes works with the error,
but in general it won't.
2021-03-02 10:58:36 -05:00
Tim Edwards 1f50c7ccc5 Updating VERSION with pull request #18 on github. 2021-03-02 10:16:54 -05:00
Ahmed Ghazy 8282460774 Remove netgen.{sh,tcl} and add them to .gitignore 2021-03-02 10:24:17 +02:00
Tim Edwards a888502038 Merge branch 'master' into netgen-1.5 2021-03-02 03:00:35 -05:00
Tim Edwards ea07642172 Removed the symmetry breaking option from the scripted "lvs"
command.
2021-03-01 16:57:49 -05:00
Tim Edwards e9da037001 Removed the code for fast symmetry breaking, as it has been found
to generate incorrect results on occasion.  The method to parallelize
cells with the same no-connect pins should avoid the worst-case
symmetry breaking that was previously plaguing the LVS of large
standard-cell layouts.
2021-03-01 16:55:07 -05:00
Tim Edwards 7ee50a3f8f Modified the parallel combination code to treat cells as equivalently
parallel if the same pins are no-connects.  These were previously not
treated as parallel because each no-connect has a unique node number,
and cells were only considered as parallel if all pins connected to
the same node numbers.  This avoids issues with long-running symmetry
breaking on standard cell designs due to cells like antenna taps or
any cell that is placed without connecting it up.  To do:  This
makes indistinguishable certain cases, e.g., N cells in circuit 1
with pin X open vs. N cells in circuit 2 with pin X all tied together.
This could be caught during property matching.
2021-03-01 16:33:55 -05:00
Tim Edwards c16258d4d1 Merge branch 'master' into netgen-1.5 2021-02-25 03:00:36 -05:00
Tim Edwards c7848c9c02 Corrected an error that (in a rare circumstance) can cause netgen
to go into an infinite loop and fill memory until it crashes, due
to a complete pin mismatch between devices causing one device to
have its pins removed and replaced with proxy pins.
2021-02-24 16:12:19 -05:00
Tim Edwards 5341d7a5fd Merge branch 'master' into netgen-1.5 2021-02-17 03:00:31 -05:00
Tim Edwards 402e1f0f25 Found a chokepoint in FlattenInstancesOf that was unnecessary as it
was running through the entire object linked list to find the
predecessor of a record that it had already found.  Solved by simply
keeping track of the predecessor record.
2021-02-16 17:12:00 -05:00
Tim Edwards 8395df633c Merge branch 'master' into netgen-1.5 2021-02-10 03:00:16 -05:00
Tim Edwards 19471275df Added handling of control blocks (.CONTROL ... .ENDC) in ngspice-
format files to the SPICE parser, so that netgen can be run
directly on a testbench file and not generate errors due to
statements in the control block.
2021-02-09 09:30:27 -05:00
Tim Edwards e75f5661e2 Added a zero-value current source to the zero-valued devices handled
by the pre-matching method.  The current source is treated like the
others except that it forms an open circuit rather than a short.
2021-02-09 09:12:22 -05:00
Tim Edwards 6554063df3 Merge branch 'master' into netgen-1.5 2021-01-22 03:00:40 -05:00
Tim Edwards a034fc16d6 Updated VERSION. 2021-01-21 13:41:20 -05:00
Tim Edwards 62fbd422e2 Modified netcmp.c "addproxies" routine to not get confused by cells
with no pins marked with a "(no pins)" placeholder.  Otherwise it
goes into an infinite loop and eats up memory until it crashes.
2021-01-21 13:38:44 -05:00
Tim Edwards 4416a380b3 Merge branch 'master' into netgen-1.5 2021-01-18 03:00:51 -05:00
Tim Edwards d0bae6aff4 Updated VERSION with the merge of pull request #15 from Alessandro de
Laurenzis.
2021-01-17 11:38:11 -05:00
Alessandro De Laurenzis 8a7bb7f2ca Fix missing prototype for ReadVerilogFile function
Unbreak OpenBSD port for mips64 arch
2021-01-17 10:21:52 +01:00
Tim Edwards 46394b2000 Merge branch 'master' into netgen-1.5 2021-01-17 03:00:15 -05:00
Tim Edwards 0df6c83df5 Updated VERSION to go along with the merge of pull request #14
from Anton Blanchard.
2021-01-16 12:05:52 -05:00
Anton Blanchard 8996fe03dc Increase OBJHASHSIZE
I have a design that is taking quite a long time for netgen to complete LVS
checking. Profiles show a large chunk of runtime is in the hash functions.

Some of the hashtables are very sparsely populated, but others are
heavily used. One hashtable has chains of over 250. Longer term it would
be worth investigating resizing the hashtables (or perhaps using other
data strutures), but for now I looked at what changing the number of
hash buckets (OBJHASHSIZE) does for performance:

OBJHASHSIZE	time (mm:ss)
997		24:18
10093		 4:42
42073		 3:12
104729		 2:51

I somewhat arbitrarily chose 42073 which gives us a 7.6x improvement in
runtime.
2021-01-15 18:24:34 -07:00
Tim Edwards 3fe3bc4cfa Merge branch 'master' into netgen-1.5 2021-01-09 03:00:32 -05:00
Tim Edwards f3cebd9099 Corrected a potential crash condition while doing series combination. 2021-01-08 09:55:00 -05:00
Tim Edwards 6661910672 Merge branch 'master' into netgen-1.5 2020-12-21 03:00:30 -05:00
Tim Edwards 920c6e6928 Corrected a problem causing a segfault during a property record
copy if the property record does not have a model.class record
(should it always?).
2020-12-20 11:55:20 -05:00
Tim Edwards e7a36630f6 Merge branch 'master' into netgen-1.5 2020-12-16 03:00:54 -05:00
Tim Edwards 69780aa048 Added patch from Mitch Bailey which sorts the objects in a verilog
file input so that pins occur first before nodes, as they do in a
SPICE netlist.  Certain parts of the comparison code depend on pins
being first in the netlist, and reordering them when reading input
is easier than rewriting the rest of the code.
2020-12-15 09:57:49 -05:00
Tim Edwards f32b0b34a3 Merge branch 'master' into netgen-1.5 2020-12-06 03:00:10 -05:00
Tim Edwards 2a0ebfde93 Updated VERSION with the commit. 2020-12-05 15:46:45 -05:00
Tim Edwards 6e9e6abe98 Removed the netgen.sh and netgen.tcl scripts from the repository,
which are generated by ./configure and should not be in the repo.
2020-12-05 15:46:03 -05:00
Tim Edwards 6b731ddd7a Merge branch 'master' into netgen-1.5 2020-12-04 03:00:27 -05:00
Tim Edwards b9769b9f55 Updated version to go along with pull request merge from github. 2020-12-03 20:17:59 -05:00
Tim 'mithro' Ansell 7e42483986 Fix configure script to not clobber CFLAGS.
Signed-off-by: Tim 'mithro' Ansell <[email protected]>
2020-11-29 16:39:28 -08:00
Tim 'mithro' Ansell 97b0d08e4f Rework configure script so exit code works.
The previous script would swallow the exit code of the `./configure`
script and thus it looked like doing a configure always succeeded.

Signed-off-by: Tim 'mithro' Ansell <[email protected]>
2020-11-29 16:35:47 -08:00
Tim Edwards 99e35d8b11 Merge branch 'master' into netgen-1.5 2020-10-09 03:00:25 -04:00
Tim Edwards d2c356f9e2 Added a "-full" switch to the scripted "lvs" command that switches
to the old symmetry breaking method (see previous commit message).
2020-10-08 09:57:01 -04:00
Tim Edwards 5e99fd5ef9 Found a counterexample which shows that the fast symmetry breaking
introduced in revision 150 can result in an incorrect result
reporting a bad match where the match is actually good (as proven
by running the full symmetry breaking on the same netlist).
Because the fast symmetry breaking is orders of magnitude faster
for large circuits, and because the false positive result appears
to be rare, I have introduced a command "symmetry" to switch
methods between fast and full.  So fast symmetry breaking can be
run unless the result fails on symmetry breaking, in which case
the method can be switched to full to see if the problem is a
false positive or not.  This is not an ideal solution, and some
investigation is needed to determine if there is a way to apply
fast symmetry breaking without encountering a false positive
error.
2020-10-08 09:43:25 -04:00
Tim Edwards 65b542f0ab Merge branch 'master' into netgen-1.5 2020-10-08 03:00:22 -04:00
Tim Edwards 04dd4a64d5 Corrected problems with the port count routine not being specified
with the file number, so that it can get confused between libraries.
Also made a fix to coerce one cell class to be forced to be the
same in both circuits under some circumstances.
2020-10-07 21:32:07 -04:00
Tim Edwards b826870be9 Merge branch 'master' into netgen-1.5 2020-08-09 03:01:40 -04:00
Tim Edwards 50b0e9cb65 Found examples where the automated "pin matching" algorithm causes
the top level circuits to be declared matching with no errors even
though the pins do not match.  "proxy pins" are fine for subcells
to detect cases where one subcell has an unused pin and the matching
subcell does not declare it, but that should not be allowed on the
top level, as it cannot be known whether the pin is unused or not.
2020-08-08 13:19:26 -04:00
Tim Edwards ed5276d67b Merge branch 'master' into netgen-1.5 2020-08-04 03:00:31 -04:00
Tim Edwards 82be18ec4b Corrected a bounds check on sub-arrays inside bundles, that prevents
the bundle from being parsed correctly when any sub-array is only one
bit wide.
2020-08-03 22:57:19 -04:00
Tim Edwards 4ee3a1464b Corrected the left-hand side assignment for "assign" statements and
corrected the error statement so that it refers both to the (corrected)
left-hand side and also the portion of the right-hand side that cannot
be parsed as structural verilog.
2020-08-03 11:49:09 -04:00
Tim Edwards 69c9d85be7 Merge branch 'master' into netgen-1.5 2020-08-01 03:00:23 -04:00
Tim Edwards 8e215d3b66 Corrected the PropertyMatch() routine; previously the symmetry
breaking by property was only matching properties between circuits but
not within the same circuit, which is needed for correct symmetry
breaking.  But the PropertyMatch() routine assumed that it is passed
one item from each circuit, leading to a segfault when running the
symmetry breaking within a single circuit.  This has been fixed.
2020-07-31 12:56:20 -04:00
Tim Edwards c45d51e950 Tracked down and fixed problems with implicit pins in verilog (pins
that are not declared in the verilog netlist because they don't
connect to anything, and their presence is not required by verilog
syntax) and the printing of proxy pins created to act as placeholders
for those implicit pins.  Also removed the pinting of the "disconnected
pin" messages for black-box modules (since by definition they have
disconnected pins, because black-box modules have no contents).
2020-07-31 12:22:50 -04:00
Tim Edwards ad05d059c7 Merge branch 'master' into netgen-1.5 2020-07-31 03:00:27 -04:00
Tim Edwards 85eb34c01e Made several corrections to handling of proxy pins when matching
black-box circuits, especially those coming from verilog netlists
where a pin does not need to be declared and is implicitly floating.
This prevents the need to have an explicit black-box entry for any
verilog module that may have an instance that does not declare all
the pin connections.  Also corrected an error which causes mysterious
failures if a verilog netlist is read before a SPICE netlist,
because the former gets hashed case-sensitive and the latter changes
the hashing to case-insensitive.  Modified to force the SPICE
netlist to be treated case-sensitive, which may cause errors, but
is consistent with the reverse order handling, and doesn't cause
unexplained errors.
2020-07-30 22:51:34 -04:00
Tim Edwards 8a24c6c3ca Modified the ResolveAutomorphisms() routine once again, to break
symmetry of all elements in all symmetric partitions, rather than
(as previously done) all elements in each partition, before re-
running iterations to convergence.  This solves the problem of
having a very large number of partitions with a few elements each
taking a long time to run.
2020-07-30 14:48:08 -04:00
Tim Edwards 46cdf48bc4 Updated the version to force the tarball and github mirror. 2020-07-30 08:10:09 -04:00
Tim Edwards 9d542b92b0 Corrected one logical error in netcmp.c from the last commit,
discovered and fixed by Ahmed Ghazy.
2020-07-30 08:06:44 -04:00
15 changed files with 1684 additions and 843 deletions
+2
View File
@@ -12,3 +12,5 @@ scripts/config.status
*~
*.log
UPDATE_ME
tcltk/netgen.sh
tcltk/netgen.tcl
+1 -1
View File
@@ -1 +1 @@
1.5.151
1.5.181
+119 -47
View File
@@ -193,17 +193,19 @@ void flattenCell(char *name, int file)
if (Debug) Printf("Renaming %s to %s\n", tmp->name, tmpstr);
FreeString(tmp->name);
tmp->name = strsave(tmpstr);
#if OLDPREFIX
sprintf(tmpstr, "%s%s%s", ParentParams->instance.name, SEPARATOR,
tmp->instance.name);
#else
strcpy(tmpstr+prefixlength,tmp->instance.name);
#endif
FreeString(tmp->instance.name);
tmp->instance.name = strsave(tmpstr);
HashPtrInstall(tmp->name, tmp, &(ThisCell->objdict));
if (tmp->type == FIRSTPIN)
HashPtrInstall(tmp->instance.name, tmp, &(ThisCell->instdict));
if ((tmp->type != NODE) && (tmp->instance.name != NULL)) {
#if OLDPREFIX
sprintf(tmpstr, "%s%s%s", ParentParams->instance.name, SEPARATOR,
tmp->instance.name);
#else
strcpy(tmpstr+prefixlength,tmp->instance.name);
#endif
FreeString(tmp->instance.name);
tmp->instance.name = strsave(tmpstr);
if (tmp->type == FIRSTPIN)
HashPtrInstall(tmp->instance.name, tmp, &(ThisCell->instdict));
}
}
/* splice instance out of parent */
@@ -253,7 +255,7 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
{
struct objlist *ParentParams;
struct objlist *ParentProps;
struct objlist *NextObj;
struct objlist *NextObj, *LastObj, *prepp;
struct objlist *ChildObjList;
struct nlist *ThisCell;
struct nlist *ChildCell;
@@ -296,21 +298,35 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
while (notdone) {
notdone = 0;
ParentParams = ThisCell->cell;
LastObj = NULL;
for (ParentParams = ThisCell->cell; ParentParams != NULL;
ParentParams = NextObj) {
ParentParams = NextObj) {
if (Debug) Printf("Parent = %s, type = %d\n",
ParentParams->name, ParentParams->type);
NextObj = ParentParams->next;
if (ParentParams->type != FIRSTPIN) continue;
if (!(*matchfunc)(ParentParams->model.class, instance)) continue;
if (ParentParams->type != FIRSTPIN) {
LastObj = ParentParams;
continue;
}
if (!(*matchfunc)(ParentParams->model.class, instance)) {
LastObj = ParentParams;
continue;
}
ChildCell = LookupCellFile(ParentParams->model.class, ThisCell->file);
if (Debug)
Printf(" Flattening instance: %s, primitive = %s\n",
ParentParams->instance.name, (ChildCell->class ==
CLASS_SUBCKT) ? "no" : "yes");
if (ChildCell->class != CLASS_SUBCKT) continue;
if (ChildCell == ThisCell) continue; // Avoid infinite loop
if ((ChildCell->class != CLASS_SUBCKT) && (ChildCell->class != CLASS_MODULE)) {
LastObj = ParentParams;
continue;
}
if (ChildCell == ThisCell) {
LastObj = ParentParams;
continue; // Avoid infinite loop
}
/* Does the parent cell have properties? If so, save a pointer to them */
for (ParentProps = ParentParams->next; ParentProps &&
@@ -373,10 +389,10 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
}
/* in pathological cases, the lengths of the port lists may
change. This is an error, but that is no reason to allow
the code to core dump. We avoid this by placing a
superfluous check on ob2->type
*/
* change. This is an error, but that is no reason to allow
* the code to core dump. We avoid this by placing a
* superfluous check on ob2->type
*/
if (ob2 != NULL)
ob2 = ob2->next;
@@ -456,17 +472,19 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
if (Debug) Printf("Renaming %s to %s\n", tmp->name, tmpstr);
FreeString(tmp->name);
tmp->name = strsave(tmpstr);
#if OLDPREFIX
sprintf(tmpstr, "%s%s%s", ParentParams->instance.name, SEPARATOR,
tmp->instance.name);
#else
strcpy(tmpstr+prefixlength,tmp->instance.name);
#endif
FreeString(tmp->instance.name);
tmp->instance.name = strsave(tmpstr);
HashPtrInstall(tmp->name, tmp, &(ThisCell->objdict));
if (tmp->type == FIRSTPIN)
HashPtrInstall(tmp->instance.name, tmp, &(ThisCell->instdict));
if ((tmp->type != NODE) && (tmp->instance.name != NULL)) {
#if OLDPREFIX
sprintf(tmpstr, "%s%s%s", ParentParams->instance.name, SEPARATOR,
tmp->instance.name);
#else
strcpy(tmpstr+prefixlength,tmp->instance.name);
#endif
FreeString(tmp->instance.name);
tmp->instance.name = strsave(tmpstr);
if (tmp->type == FIRSTPIN)
HashPtrInstall(tmp->instance.name, tmp, &(ThisCell->instdict));
}
}
/* Do property inheritance */
@@ -497,10 +515,21 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
for (ob2 = ChildObjList; ob2 && ob2->next != NULL; ob2 = ob2->next) ;
}
else {
/* find ParentParams in ThisCell list */
for (ob2 = ThisCell->cell; ob2 && ob2->next != ParentParams; ob2=ob2->next);
/* find ParentParams in ThisCell list. In most cases, LastObj */
/* should be pointing to it. */
if (LastObj && (LastObj->next == ParentParams)) {
ob2 = LastObj;
}
else {
for (ob2 = LastObj; ob2 && ob2->next != ParentParams; ob2=ob2->next);
if (ob2 == NULL) {
/* It should not happen that LastObj is ahead of ParentParams */
/* but just in case, this long loop will find it. */
for (ob2 = ThisCell->cell; ob2 && ob2->next != ParentParams; ob2=ob2->next);
}
}
if (ob2)
for (ob2->next = ChildObjList; ob2->next != NULL; ob2 = ob2->next) ;
for (ob2->next = ChildObjList; ob2->next != NULL; ob2 = ob2->next) ;
}
/* now, ob2 is last element in child list, so skip and reclaim parent */
@@ -1136,9 +1165,10 @@ int UniquePins(char *name, int filenum)
struct nlist *cleanuppins(struct hashlist *p, void *clientdata)
{
struct nlist *ptr;
struct objlist *ob, *obt, *lob, *nob, *firstpin;
struct objlist *ob, *obt, *lob, *nob, *firstpin, *pob;
struct nlist *tc = (struct nlist *)clientdata;
int pinnum;
char *saveinst = NULL;
ptr = (struct nlist *)(p->ptr);
if (tc->file != ptr->file) return NULL;
@@ -1186,13 +1216,44 @@ struct nlist *cleanuppins(struct hashlist *p, void *clientdata)
}
FREE(ob->name);
if (ob->instance.name != NULL) FREE(ob->instance.name);
if (ob->instance.name != NULL) {
/* Keep a copy of the instance name (see below) */
if (saveinst != NULL) FREE(saveinst);
saveinst = ob->instance.name;
}
if (ob->model.class != NULL) FREE(ob->model.class);
FREE(ob);
}
else {
lob = ob;
ob->type = pinnum++; // Renumber pins in order
if ((ob->type == PROPERTY) && (pinnum == 1))
{
/* If this happens, then all the pins got removed,
* and there is probably something very much wrong
* with the setup. However, to keep netgen from
* blowing up, add back a "proxy(no pins)" record
* in front; otherwise we'd have an orphaned
* property record.
*/
pob = GetObject();
pob->name = (char *)MALLOC(15);
sprintf(pob->name, "proxy(no pins)");
pob->model.class = strsave(ob->model.class);
if (saveinst != NULL)
pob->instance.name = strsave(saveinst);
else
/* This should never happen */
pob->instance.name = strsave("error");
pob->type = pinnum++;
pob->node = -1;
pob->next = ob;
lob->next = pob;
lob = ob;
}
else
{
lob = ob;
ob->type = pinnum++; // Renumber pins in order
}
}
ob = nob;
obt = obt->next;
@@ -1203,6 +1264,8 @@ struct nlist *cleanuppins(struct hashlist *p, void *clientdata)
HashPtrInstall(firstpin->instance.name, firstpin, &(ptr->instdict));
}
}
if (saveinst != NULL) FREE(saveinst);
return NULL; /* Keep the search going */
}
@@ -1660,7 +1723,8 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
while (ecomp != NULL) {
if ((ecomp->num1 != ecomp->num2) && (ecomp->cell1 != NULL) &&
((ecomp->cell1->class == CLASS_RES) ||
(ecomp->cell1->class == CLASS_VSOURCE))) {
(ecomp->cell1->class == CLASS_VSOURCE) ||
(ecomp->cell1->class == CLASS_ISOURCE))) {
int node1 = -1, node2 = -1;
lob = NULL;
for (ob1 = tc1->cell; ob1; ) {
@@ -1709,11 +1773,16 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
tsub1->name,
tc1->name);
/* merge node of endpoints */
for (ob2 = tc1->cell; ob2; ob2 = ob2->next) {
if (ob2->node == node2)
ob2->node = node1;
}
/* A current source is an open, while a */
/* resistor or voltage source is a short. */
if (ecomp->cell1->class != CLASS_ISOURCE) {
/* merge node of endpoints */
for (ob2 = tc1->cell; ob2; ob2 = ob2->next) {
if (ob2->node == node2)
ob2->node = node1;
}
}
/* snip, snip. Excise this device */
if (lob == NULL) {
@@ -1765,7 +1834,8 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
if ((ecomp->num1 != ecomp->num2) && (ecomp->cell2 != NULL) &&
((ecomp->cell2->class == CLASS_RES) ||
(ecomp->cell2->class == CLASS_VSOURCE))) {
(ecomp->cell2->class == CLASS_VSOURCE) ||
(ecomp->cell2->class == CLASS_ISOURCE))) {
int node1 = -1, node2 = -1;
lob = NULL;
for (ob2 = tc2->cell; ob2; ) {
@@ -1815,9 +1885,11 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
tc2->name);
/* merge node of endpoints */
for (ob1 = tc2->cell; ob1; ob1 = ob1->next) {
if (ob1->node == node2)
ob1->node = node1;
if (ecomp->cell2->class != CLASS_ISOURCE) {
for (ob1 = tc2->cell; ob1; ob1 = ob1->next) {
if (ob1->node == node2)
ob1->node = node1;
}
}
/* snip, snip. Excise this device */
+613 -193
View File
File diff suppressed because it is too large Load Diff
+621 -533
View File
File diff suppressed because it is too large Load Diff
+12 -1
View File
@@ -43,7 +43,8 @@ extern int PropertyMerge(char *name, int fnum, char *key, int merge_type,
int merge_mask);
extern void ResolveProperties(char *name1, int file1, char *name2, int file2);
extern void CopyProperties(struct objlist *obj_to, struct objlist *obj_from);
extern int PromoteProperty(struct property *, struct valuelist *);
extern int PromoteProperty(struct property *, struct valuelist *,
struct objlist *, struct nlist *);
extern int SetPropertyDefault(struct property *, struct valuelist *);
extern struct objlist *LinkProperties(char *model, struct keyvalue *topptr);
extern int ReduceExpressions(struct objlist *instprop, struct objlist *parprops,
@@ -65,6 +66,15 @@ extern void AssignCircuits(char *name1, int file1, char *name2, int file2);
/* flatten.c */
extern int PrematchLists(char *, int, char *, int);
/* verilog.c */
struct cellstack {
char *cellname;
struct cellstack *next;
};
void ReadVerilogFile(char *fname, int filenum, struct cellstack **CellStackPtr,
int blackbox);
/* Define (enumerate) various device classes, largely based on SPICE */
/* model types, mixed with some ext/sim types. */
@@ -140,6 +150,7 @@ extern int NoOutput; /* set this to 1 to disable stdout output */
extern int Composition; /* direction of composition */
extern int UnixWildcards; /* TRUE if *,?,{},[] only; false if full REGEXP */
extern int GlobalParallelNone; /* If TRUE, don't parallel combine any cells */
extern int GlobalParallelOpen; /* If TRUE, parallel combine cells w/no-connects */
/* magic internal flag to restrict searches to recently placed cells */
extern int QuickSearch;
/* does re"CellDef"ing a cell add to it or overwrite it??? */
+13 -6
View File
@@ -289,7 +289,7 @@ static struct hashdict cell_dict;
void InitCellHashTable(void)
{
hashfunc = hash;
matchfunc = match;
matchfunc = NULL;
matchintfunc = matchfile;
InitializeHashTable(&cell_dict, CELLHASHSIZE);
}
@@ -975,7 +975,10 @@ struct objlist *CopyObjList(struct objlist *oldlist, unsigned char doforall)
newob->model.class = NULL;
else
newob->model.class = strsave(tmp->model.class);
newob->instance.name = (tmp->instance.name) ?
if (newob->type == NODE)
newob->instance.flags = tmp->instance.flags;
else
newob->instance.name = (tmp->instance.name) ?
strsave(tmp->instance.name) : NULL;
}
newob->node = tmp->node;
@@ -1095,8 +1098,8 @@ void FreeObject(struct objlist *ob)
FREE(ob->instance.props);
}
}
else {
/* All other records */
else if (ob->type != NODE) {
/* All other records except NODE, which uses this for flags */
if (ob->instance.name != NULL) FreeString(ob->instance.name);
}
if (ob->model.class != NULL) FreeString(ob->model.class);
@@ -1112,13 +1115,17 @@ void FreeObjectAndHash(struct objlist *ob, struct nlist *ptr)
/*************** GENERAL UTILITIES ****************************/
int NumberOfPorts(char *cellname)
int NumberOfPorts(char *cellname, int file)
{
struct nlist *tp;
struct objlist *ob;
int ports;
tp = LookupCell(cellname);
if (file == -1)
tp = LookupCell(cellname);
else
tp = LookupCellFile(cellname, file);
if (tp == NULL) return(0);
ports = 0;
for (ob = tp->cell; ob != NULL; ob = ob->next)
+5 -3
View File
@@ -28,6 +28,8 @@
#define PROXY (0) /* Used in model.port record of ports */
#define NO_CONNECT 1 /* Use in object list to flag an isolated net */
/* Lists of device properties. Order is defined at the time of */
/* the cell definition; values are sorted at the time instances */
/* are read. */
@@ -160,6 +162,7 @@ struct objlist {
union {
char *name; /* unique name for the instance, or */
/* (string) value of property for properties */
int flags; /* Used by NODE type to flag isolated net */
struct valuelist *props; /* Property record */
} instance;
int node; /* the electrical node number of the port/node/pin */
@@ -192,9 +195,8 @@ struct Permutation {
struct Permutation *next;
};
#define OBJHASHSIZE 997 /* the size of the object and instance hash lists */
#define OBJHASHSIZE 42073 /* the size of the object and instance hash lists */
/* prime numbers are good choices as hash sizes */
/* 101 is a good number for IBMPC */
/* cell definition for hash table */
/* NOTE: "file" must come first for the hash matching by name and file */
@@ -242,7 +244,7 @@ extern void FreeObjectAndHash(struct objlist *ob, struct nlist *ptr);
extern void FreePorts(char *cellname);
extern struct IgnoreList *ClassIgnore;
extern int NumberOfPorts(char *cellname);
extern int NumberOfPorts(char *cellname, int file);
extern struct objlist *InstanceNumber(struct nlist *tp, int inst);
extern struct objlist *List(char *list_template);
+1 -1
View File
@@ -929,7 +929,7 @@ void ToggleDebug(void)
void DescribeCell(char *name, int detail)
{
Printf("Cell: %s contains %d instances, %d nodes and %d ports\n", name,
NumberOfInstances(name), RenumberNodes(name), NumberOfPorts(name));
NumberOfInstances(name), RenumberNodes(name), NumberOfPorts(name, -1));
PrintEmbeddingTree(stdout,name,detail);
}
+7 -3
View File
@@ -801,7 +801,11 @@ void DescribeInstance(char *name, int file)
{
if (ob->node > nodemax) nodemax = ob->node;
else if ((ob->node == -1) && (ob->model.port != PROXY)) {
if (!(tp->flags & CELL_PLACEHOLDER))
/* All black-box modules and placeholders by definition have all */
/* disconnected pins, so don't report those. */
if (!(tp->flags & CELL_PLACEHOLDER) && (tp->class != CLASS_MODULE))
{
if (disconnectednodes == 0) Fprintf(stderr, "\n");
disconnectednodes++;
@@ -903,7 +907,7 @@ void PrintLeavesInCell(char *cellname, int filenum)
np->dumped = 1;
if (np->class != CLASS_SUBCKT) {
Printf("%s; %d ports; Primitive.\n", cellname, NumberOfPorts(cellname));
Printf("%s; %d ports; Primitive.\n", cellname, NumberOfPorts(cellname, filenum));
return;
}
@@ -916,7 +920,7 @@ void PrintLeavesInCell(char *cellname, int filenum)
am_a_leaf = 0;
}
if (am_a_leaf) Printf("%s; %d ports\n", cellname, NumberOfPorts(cellname));
if (am_a_leaf) Printf("%s; %d ports\n", cellname, NumberOfPorts(cellname, filenum));
return;
}
+25 -14
View File
@@ -473,15 +473,6 @@ void CleanupSubcell() {
SetClass(CLASS_MODULE);
}
/*------------------------------------------------------*/
/* Structure for stacking nested subcircuit definitions */
/*------------------------------------------------------*/
struct cellstack {
char *cellname;
struct cellstack *next;
};
/*------------------------------------------------------*/
/* Push a subcircuit name onto the stack */
/*------------------------------------------------------*/
@@ -874,6 +865,17 @@ skip_ends:
}
}
/* Ignore anything in a .CONTROL ... .ENDC block */
else if (matchnocase(nexttok, ".CONTROL")) {
while (1) {
SpiceSkipNewLine();
SkipTok(NULL);
if (EndParseFile()) break;
if (matchnocase(nexttok, ".ENDC"))
break;
}
}
// Blackbox (library) mode---parse only subcircuits and models;
// ignore all components.
@@ -1184,7 +1186,7 @@ skip_ends:
else if (CountPorts(model, filenum) != 2) {
/* Modeled device: Make sure it has the right number of ports */
Fprintf(stderr, "Device \"%s\" has wrong number of ports for a "
"resistor.\n");
"resistor.\n", model);
goto baddevice;
}
usemodel = 1;
@@ -1900,10 +1902,19 @@ char *ReadSpiceTop(char *fname, int *fnum, int blackbox)
}
}
/* Make sure all SPICE file reading is case insensitive */
matchfunc = matchnocase;
matchintfunc = matchfilenocase;
hashfunc = hashnocase;
/* Make sure all SPICE file reading is case insensitive */
/* BUT if a verilog file was read before it, then it will */
/* be forced to be case sensitive, caveat end-user. */
if (matchfunc == match) {
Printf("Warning: A case-sensitive file has been read and so the "
"SPICE netlist must be treated case-sensitive to match.\n");
}
else {
matchfunc = matchnocase;
matchintfunc = matchfilenocase;
hashfunc = hashnocase;
}
InitializeHashTable(&spiceparams, OBJHASHSIZE);
+59 -10
View File
@@ -553,9 +553,43 @@ void CleanupModule() {
int maxnode = 0;
int has_submodules = FALSE;
struct objlist *sobj, *nobj, *lobj, *pobj;
struct objlist *myLastPort, *object_it, *myNextObject;
if (CurrentCell == NULL) return;
myLastPort = NULL;
/* Reorder objects so that all ports come first, before nodes, because
* parts of the code depend on it.
*/
for (object_it = CurrentCell->cell; object_it && object_it->type <= 0;
object_it = myNextObject ) {
myNextObject = object_it->next;
if (!myNextObject) // end of list
continue;
if (myLastPort == NULL) {
if (object_it->type == PORT) {
myLastPort = object_it; // port at begining of list
myNextObject = object_it; // otherwise skips one
}
else if (myNextObject->type == PORT) {
object_it->next = myNextObject->next;
myNextObject->next = CurrentCell->cell;
CurrentCell->cell = myNextObject;
myLastPort = myNextObject;
}
}
else if (myNextObject->type == PORT) {
object_it->next = myNextObject->next;
myNextObject->next = myLastPort->next;
myLastPort->next = myNextObject;
myLastPort = myNextObject;
}
}
for (sobj = CurrentCell->cell; sobj; sobj = sobj->next)
if (sobj->node > maxnode)
maxnode = sobj->node + 1;
@@ -598,11 +632,6 @@ void CleanupModule() {
/* Structure for stacking nested module definitions */
/*------------------------------------------------------*/
struct cellstack {
char *cellname;
struct cellstack *next;
};
/* Forward declarations */
extern void IncludeVerilog(char *, int, struct cellstack **, int);
@@ -1225,7 +1254,12 @@ skip_endmodule:
lhs = LookupObject(nodename, CurrentCell);
*aptr = '[';
}
else strcpy(noderoot, nexttok);
else {
strcpy(noderoot, nexttok);
/* Set LHS to the start of the vector */
sprintf(nodename, "%s[%d]", nexttok, wb.start);
lhs = LookupObject(nodename, CurrentCell);
}
}
else {
lhs = LookupObject(nexttok, CurrentCell);
@@ -1290,13 +1324,21 @@ skip_endmodule:
if (rhs != NULL) {
Printf("Improper assignment; left-hand side cannot "
"be parsed.\n");
Printf("Right-hand side is \"%s\".\n", rhs->name);
if (j != -1)
Printf("Right-hand side is \"%s\".\n", assignroot);
else
Printf("Right-hand side is \"%s\".\n", rhs->name);
Printf("Improper expression is \"%s\".\n", nexttok);
break;
}
if (lhs != NULL) {
Printf("Improper assignment; right-hand side cannot "
"be parsed.\n");
Printf("Left-hand side is \"%s\".\n", lhs->name);
if (i != -1)
Printf("Left-hand side is \"%s\".\n", noderoot);
else
Printf("Left-hand side is \"%s\".\n", lhs->name);
Printf("Improper expression is \"%s\".\n", nexttok);
/* Not parsable, probably behavioral verilog? */
Printf("Module '%s' is not structural verilog, "
"making black-box.\n", model);
@@ -1854,7 +1896,7 @@ nextinst:
if (is_bundle &&
((i == -1) ||
((wbb.start > wbb.end) && (i < wbb.end)) ||
((wbb.start < wbb.end) && (i > wbb.end)))) {
((wbb.start <= wbb.end) && (i > wbb.end)))) {
if (bptr) *bptr = '[';
netname = cptr + 1;
@@ -1933,7 +1975,9 @@ nextinst:
sprintf(localnet, "_noconnect_%d_", localcount++);
Node(localnet);
join(localnet, obptr->name);
Fprintf(stderr, "Note: Implicit pin %s\n", obpinname);
Fprintf(stderr,
"Note: Implicit pin %s in instance %s of %s in cell %s\n",
obpinname, locinst, modulename, CurrentCell->name);
}
else if (GetBus(scan->net, &wb) == 0) {
char *bptr2;
@@ -2094,6 +2138,11 @@ char *ReadVerilogTop(char *fname, int *fnum, int blackbox)
Printf("Warning: A case-insensitive file has been read and so the "
"verilog file must be treated case-insensitive to match.\n");
}
else {
matchfunc = match;
matchintfunc = matchfile;
hashfunc = hash;
}
InitializeHashTable(&verilogparams, OBJHASHSIZE);
InitializeHashTable(&verilogdefs, OBJHASHSIZE);
Vendored
+3 -1
View File
@@ -4,4 +4,6 @@
# all of its config scripts in a different directory than the configure
# script itself.
( CFLAGS="-g" ; export CFLAGS ; cd scripts ; ./configure "$@" )
export CFLAGS="$CFLAGS -g"
cd scripts
exec ./configure "$@"
+96 -12
View File
@@ -352,7 +352,7 @@ proc netgen::convert_to_json {filename lvs_final} {
close $fjson
}
#----------------------------------------------------------------
#-----------------------------------------------------------------------
# Define the "lvs" command as a way of calling the netgen options
# for standard compare, essentially the same as the old "netcomp"
# standalone program.
@@ -361,14 +361,20 @@ proc netgen::convert_to_json {filename lvs_final} {
# although if the cells have not been read in yet, then the
# original syntax of filename or {filename cellname} is required.
#
# "args" is passed to verify and may therefore contain only the
# value "-list" or nothing. If "-list", then output is returned
# as a nested list.
#----------------------------------------------------------------
# "args" may be "-list", "-json", or "-blackbox".
# "-list" returns output as a nested list.
# "-json" creates a .json-format output file in addition to stdout.
# "-blackbox" treats empty cells as black-box entries.
# "-noflatten={list}" is a list of cells not to flatten if mismatched.
# i.e., the cells are expected to match and any mismatch cannot be
# expected to be resolved by flattening the contents of the mismatched
# cells.
#-----------------------------------------------------------------------
proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
set dolist 0
set dojson 0
set noflat {}
foreach arg $args {
if {$arg == "-list"} {
puts stdout "Generating list result"
@@ -382,6 +388,30 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
} elseif {$arg == "-blackbox"} {
puts stdout "Treating empty subcircuits as black-box cells"
netgen::model blackbox on
} elseif {[string first "-noflatten=" $arg] == 0} {
set value [string range $arg 11 end]
# If argument is a filename then read the list of cells from it;
# otherwise, argument is the list of files itself in quotes or
# braces.
if {![catch {file exists $value}]} {
if {![catch {open $value r} fnf]} {
while {[gets $fnf line] >= 0} {
if {[lindex $line 0] != "#"} {
foreach cell $line {
lappend noflat $cell
}
}
}
close $fnf
} else {
puts stderr "Cannot open file $value for reading cell list."
}
} else {
set noflat [string trim $value \"\{\}]
}
if {[llength $noflat] > 0} {
puts stdout "Will not flatten these subcells: $noflat"
}
}
}
@@ -501,6 +531,8 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
return
}
set properr {}
set matcherr {}
set pinsgood 0
while {$endval != {}} {
if {$dolist == 1} {
netgen::run -list converge
@@ -528,9 +560,30 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
# Flatten the non-matching subcircuit (but not the top-level cells)
if {[netgen::print queue] != {}} {
netgen::log put " Flattening non-matched subcircuits $endval"
netgen::flatten class "[lindex $endval 0] $fnum1"
netgen::flatten class "[lindex $endval 1] $fnum2"
if {([lsearch $noflat [lindex $endval 0]] == -1) &&
([lsearch $noflat [lindex $endval 1]] == -1)} {
netgen::log put " Flattening non-matched subcircuits $endval"
netgen::flatten class "[lindex $endval 0] $fnum1"
netgen::flatten class "[lindex $endval 1] $fnum2"
} else {
netgen::log put " Continuing with black-boxed subcircuits $endval"
lappend matcherr [lindex $endval 0]
# Match pins
netgen::log echo off
if {$dolist == 1} {
set result [equate -list -force pins "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"]
} else {
set result [equate -force pins "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"]
}
if {$result != 0} {
equate classes "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"
}
set pinsgood $result
netgen::log echo on
}
}
} else {
# Match pins
@@ -546,15 +599,39 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
equate classes "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"
}
set pinsgood $result
netgen::log echo on
}
if {$uresult == 2} {lappend properr [lindex $endval 0]}
} else {
# Flatten the non-matching subcircuit (but not the top-level cells)
if {[netgen::print queue] != {}} {
netgen::log put " Flattening non-matched subcircuits $endval"
netgen::flatten class "[lindex $endval 0] $fnum1"
netgen::flatten class "[lindex $endval 1] $fnum2"
if {([lsearch $noflat [lindex $endval 1]] == -1) &&
([lsearch $noflat [lindex $endval 1]] == -1)} {
netgen::log put " Flattening non-matched subcircuits $endval"
netgen::flatten class "[lindex $endval 0] $fnum1"
netgen::flatten class "[lindex $endval 1] $fnum2"
} else {
netgen::log put " Continuing with black-boxed subcircuits $endval"
lappend matcherr [lindex $endval 0]
netgen::log put " Continuing with black-boxed subcircuits $endval"
lappend matcherr [lindex $endval 0]
# Match pins
netgen::log echo off
if {$dolist == 1} {
set result [equate -list -force pins "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"]
} else {
set result [equate -force pins "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"]
}
if {$result != 0} {
equate classes "$fnum1 [lindex $endval 0]" \
"$fnum2 [lindex $endval 1]"
}
set pinsgood $result
netgen::log echo on
}
}
}
netgen::log echo off
@@ -569,10 +646,17 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
netgen::log echo off
puts stdout "Result: " nonewline
netgen::log echo on
verify only
if {$pinsgood == 0} {
netgen::log put "The top level cell failed pin matching.\n"
} else {
verify only
}
if {$properr != {}} {
netgen::log put "The following cells had property errors: $properr\n"
}
if {$matcherr != {}} {
netgen::log put "The following subcells failed to match: $matcherr\n"
}
if {$dolog} {
netgen::log end
}
+107 -18
View File
@@ -94,6 +94,7 @@ int _netcmp_ignore(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_permute(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_property(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_exhaustive(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_symmetry(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_restart(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_global(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
int _netcmp_convert(ClientData, Tcl_Interp *, int, Tcl_Obj *CONST objv[]);
@@ -244,6 +245,8 @@ Command netcmp_cmds[] = {
{"exhaustive", _netcmp_exhaustive,
"\n "
"toggle exhaustive subdivision"},
{"symmetry", _netcmp_symmetry,
"(deprecated)"},
{"restart", _netcmp_restart,
"\n "
"start over (reset data structures)"},
@@ -1532,23 +1535,24 @@ int
_netgen_model(ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])
{
struct nlist *tp;
struct nlist *tp, *tp2;
char *model, *retclass;
unsigned char class;
int fnum = -1;
int result, index, nports;
int result, index, nports, nports2;
char *modelclasses[] = {
"undefined", "nmos", "pmos", "pnp", "npn",
"resistor", "capacitor", "diode",
"inductor", "module", "blackbox", "xline",
"moscap", "mosfet", "bjt", "subcircuit", NULL
"moscap", "mosfet", "bjt", "subcircuit", "copy",
NULL
};
enum OptionIdx {
UNDEF_IDX, NMOS_IDX, PMOS_IDX, PNP_IDX, NPN_IDX,
RES_IDX, CAP_IDX, DIODE_IDX, INDUCT_IDX,
MODULE_IDX, BLACKBOX_IDX, XLINE_IDX, MOSCAP_IDX,
MOSFET_IDX, BJT_IDX, SUBCKT_IDX
MOSFET_IDX, BJT_IDX, SUBCKT_IDX, COPY_IDX
};
if (objc != 3 && objc != 2) {
@@ -1580,7 +1584,7 @@ _netgen_model(ClientData clientData,
if (objc == 3) {
model = Tcl_GetString(objv[2]);
nports = NumberOfPorts(model);
nports = NumberOfPorts(model, fnum);
if (Tcl_GetIndexFromObj(interp, objv[2], (CONST84 char **)modelclasses,
"class", 0, &index) != TCL_OK) {
@@ -1644,6 +1648,40 @@ _netgen_model(ClientData clientData,
break;
case SUBCKT_IDX:
class = CLASS_SUBCKT;
break;
case COPY_IDX:
/* "copy" is not a class, but indicates that the cell, */
/* if undefined or a module, should have its class */
/* taken from the other circuit, if that circuit has a */
/* cell of the same name. */
if (Circuit1 == NULL || Circuit2 == NULL) {
Tcl_SetResult(interp, "Circuits have not been queued for comparison.",
NULL);
return TCL_ERROR;
}
if (tp == Circuit1) {
tp2 = LookupCellFile(tp->name, Circuit2->file);
nports2 = NumberOfPorts(tp2->name, Circuit2->file);
}
else if (tp == Circuit2) {
tp2 = LookupCellFile(tp->name, Circuit1->file);
nports2 = NumberOfPorts(tp2->name, Circuit1->file);
}
else {
Tcl_SetResult(interp, "The referenced netlist is not being compared.",
NULL);
return TCL_ERROR;
}
/* Should a non-matching number of ports be considered a fatal error? */
// if (nports2 != nports) {
// Tcl_SetResult(interp, "The number of ports for this cell does not "
// "match between netlists.", NULL);
// return TCL_ERROR;
// }
class = tp2->class;
/* To do (maybe): Rename tp ports to match tp2? */
break;
}
tp->class = class;
@@ -2419,8 +2457,7 @@ _netcmp_run(ClientData clientData,
automorphisms = ResolveAutomorphsByProperty();
if (automorphisms == 0)
Fprintf(stdout, "Netlists match uniquely.\n");
else {
else if (automorphisms > 0) {
// Next, attempt to resolve automorphisms uniquely by
// using the pin names
automorphisms = ResolveAutomorphsByPin();
@@ -2428,14 +2465,17 @@ _netcmp_run(ClientData clientData,
if (automorphisms == 0)
Fprintf(stdout, "Netlists match uniquely.\n");
else
else if (automorphisms > 0) {
// Anything left is truly indistinguishable
Fprintf(stdout, "Netlists match with %d symmetr%s.\n",
automorphisms, (automorphisms == 1) ? "y" : "ies");
while ((automorphisms = ResolveAutomorphisms()) > 0);
if (automorphisms == -1) Fprintf(stdout, "Netlists do not match.\n");
else Fprintf(stdout, "Circuits match correctly.\n");
while ((automorphisms = ResolveAutomorphisms()) > 0);
}
if (automorphisms == -1)
Fprintf(stdout, "Netlists do not match.\n");
else
Fprintf(stdout, "Circuits match correctly.\n");
}
if (PropertyErrorDetected) {
Fprintf(stdout, "There were property errors.\n");
@@ -2789,11 +2829,13 @@ _netcmp_equate(ClientData clientData,
char *name1 = NULL, *name2 = NULL, *optstart;
struct nlist *tp1, *tp2, *SaveC1, *SaveC2;
struct objlist *ob1, *ob2;
struct ElementClass *saveEclass = NULL;
struct NodeClass *saveNclass = NULL;
int file1, file2;
int i, l1, l2, ltest, lent, dolist = 0;
int i, l1, l2, ltest, lent, dolist = 0, doforce = 0;
Tcl_Obj *tobj1, *tobj2, *tobj3;
if (objc > 1) {
while (objc > 1) {
optstart = Tcl_GetString(objv[1]);
if (*optstart == '-') optstart++;
if (!strcmp(optstart, "list")) {
@@ -2801,6 +2843,13 @@ _netcmp_equate(ClientData clientData,
objv++;
objc--;
}
else if (!strcmp(optstart, "force")) {
doforce = 1;
objv++;
objc--;
}
else
break;
}
if ((objc != 2) && (objc != 4) && (objc != 6)) {
@@ -2958,6 +3007,12 @@ _netcmp_equate(ClientData clientData,
break;
case PINS_IDX:
if ((ElementClasses != NULL) && (doforce == TRUE)) {
saveEclass = ElementClasses;
saveNclass = NodeClasses;
ElementClasses = NULL;
NodeClasses = NULL;
}
if ((ElementClasses == NULL) && (auto_blackbox == FALSE)) {
if (CurrentCell == NULL) {
Fprintf(stderr, "Equate elements: no current cell.\n");
@@ -3020,6 +3075,12 @@ _netcmp_equate(ClientData clientData,
/* Recover temporarily set global variables (see above) */
Circuit1 = SaveC1;
Circuit2 = SaveC2;
/* Recover ElementClasses if forcing pins on mismatched circuits */
if (doforce == TRUE) {
ElementClasses = saveEclass;
NodeClasses = saveNclass;
}
}
break;
@@ -3282,10 +3343,10 @@ _netcmp_property(ClientData clientData,
int result, index, idx2;
char *suboptions[] = {
"integer", "double", "value", "string", NULL
"integer", "double", "value", "string", "expression", NULL
};
enum SubOptionIdx {
INTEGER_IDX, DOUBLE_IDX, VALUE_IDX, STRING_IDX
INTEGER_IDX, DOUBLE_IDX, VALUE_IDX, STRING_IDX, EXPRESSION_IDX
};
/* Note: "merge" has been deprecated, but kept for backwards compatibility. */
@@ -3379,9 +3440,15 @@ _netcmp_property(ClientData clientData,
GlobalParallelNone = FALSE;
SetParallelCombine(TRUE);
}
else if (!strcmp(Tcl_GetString(objv[2]), "connected")) {
GlobalParallelOpen = FALSE;
}
else if (!strcmp(Tcl_GetString(objv[2]), "open")) {
GlobalParallelOpen = TRUE;
}
else {
Tcl_SetResult(interp, "Bad option, should be property parallel none|all",
NULL);
Tcl_SetResult(interp, "Bad option, should be property parallel "
"none|all|connected", NULL);
return TCL_ERROR;
}
return TCL_OK;
@@ -3668,6 +3735,11 @@ _netcmp_property(ClientData clientData,
PropertyString(tp->name, fnum,
Tcl_GetString(tobj1), ival, NULL);
break;
case EXPRESSION_IDX:
PropertyString(tp->name, fnum,
Tcl_GetString(tobj1), 0,
Tcl_GetString(tobj3));
break;
}
break;
}
@@ -3937,6 +4009,23 @@ _netcmp_permute(ClientData clientData,
return TCL_OK;
}
/*------------------------------------------------------*/
/* Function name: _netcmp_symmetry */
/* Syntax: netgen::symmetry [fast|full] */
/* Formerly: x */
/* Results: */
/* Side Effects: */
/* Notes: Deprecated, retained for compatibility. */
/*------------------------------------------------------*/
int
_netcmp_symmetry(ClientData clientData,
Tcl_Interp *interp, int objc, Tcl_Obj *CONST objv[])
{
Printf("Symmetry breaking method has been deprecated.\n");
return TCL_OK;
}
/*------------------------------------------------------*/
/* Function name: _netcmp_exhaustive */
/* Syntax: netgen::exhaustive [on|off] */
@@ -3958,7 +4047,7 @@ _netcmp_exhaustive(ClientData clientData,
int result, index;
if (objc == 1)
index = YES_IDX;
index = -1;
else {
if (Tcl_GetIndexFromObj(interp, objv[1], (CONST84 char **)yesno,
"option", 0, &index) != TCL_OK)