SystemVerilog has support for time literals. The time literal for
example #10ns, adds a delay of 10ns no matter the time unit currently
in effect. For more details please refer to
http://iverilog.wikia.com/wiki/Projects#SystemVerilog_Style_Time_Literals
Tested-by: Oswaldo Cadenas <oswaldo.cadenas@gmail.com>
Signed-off-by: Prasad Joshi <prasadjoshi124@gmail.com>
This patch fixes the following problem in the compiler:
An integer task argument should be marked as an integer port.
An implicit register can be converted to either a reg or an integer.
An old style task port should default to <no type> unless reg or some
other type is provided. ANSI style is always defined. For example:
input ri;
output ro;
inout rio;
real ri, ro, rio;
should define all three task ports to be of type real.
The pform propagates the parsed enum base type information
to the elaborator so that the base type can be fully elaborated.
This is necessary to get the types of the enumeration literals
correct.
I'm adding more uses of the make_range_from_width function, so
it seems like time to get rid of its use of the svector template.
This thread led to a lot of other uses of svector that had to
also be removed.
The functions (malloc, free, etc.) that used to be provided in
malloc.h are now provided in cstdlib for C++ files and stdlib.h for
C files. Since we require a C99 compliant compiler it makes sense
that malloc.h is no longer needed.
This patch also modifies all the C++ files to use the <c...>
version of the standard C header files (e.g. <cstdlib> vs
<stdlib.h>). Some of the files used the C++ version and others did
not. There are still a few other header changes that could be done,
but this takes care of much of it.
Generate schemes may nest freely, but generate regions
(an anachronistic concept from 1364-2001) cannot nest,
not within schemes or other regions. Have the parser detect
the nesting and print an error message.
When checking for name collisions, the compiler looks for genvar
declarations in the enclosing module rather than in the current
scope, which leads to false positives. The compiler also places
all genvar declarations in the enclosing module scope, even when
the declarations are inside a generate block which has its own
scope. This patch fixes both these faults. It also fixes some
typos and outdated information in comments.
This patch is based on one from "bruce <bruce1914@gmail.com>".
I've applied all but the elaboration code, which I rewrote to
properly work with the elaboration work queue. I also constrained
the implementation so that the parameter name must have exactly
two components: the root scope name and the parameter name. This
is necessary to keep the defparm processing sane. The comments
from bruce's original patch are as follows:
--
This patch would provide function to define parameter from command
line. This serves the same functionality as 'defparam' in Verilog
source code, but provide much more ease for using. Parameter
definition can be write in command file, with following syntax:
+parameter+<scope>.<parameter>=<val>
*Do not apply any space between them*
The scope name should be full hierachical name with root name at
the begining. The following example would override test.T1 with
new value 2'b01:
+parameter+test.T1=2'b01
'test' here is the root module name. The parameter value here
should be constant. Parameter definition can also be write in
the command line:
iverilog -Ptest.T1=2'b01
This serves the same functionality with the previous example.
If we define the same parameter in command file and command line,
the one in command line would over-write all others.
This patch modifies the original SystemVerilog timeunit/timeprecision
patch in the following way:
Removed trailing space.
Reworked some code to use standard spacing rules.
Added some comments.
Combined some code.
Major rework of local/global timeunit/timeprecision logic.
Major rework of timeunit/timeprecision declaration/check code.
This was needed to remove the shift/reduce warnings.
Add a number of checks for invalid combinations.
Icarus has recognized this directive, but it did not do anything
with the information. This patch adds the functionality for most
common cases. It adds this by changing the input net type from
wire/tri to tri1 or tri0 depending on the pull. The issue is that
if the input net is not a wire or tri this is not safe and should
really be done as an external pull gate connected to the input.
We will need to handle this is it ever comes up. For now a sorry
message is printed.
This patch adds real functionality for `celldefine and pushes this
property to the run time which can access this with vpiCellInstance.
This is technically only available for a module, but all scopes
have the property and only modules should return true when the
'endmodule' is between a `celldefine and `endcelldefine directive.
Verilog generate schemes support a special case where conditional
generate schemes that contain only a nested conditional generate
scheme do not create a new scope. Instead, it relies on the nested
generate scheme to generate the scope.
The natures of disciplines were already available, this just brings
the information forward to the ivl_target.h API and exposes them via
access functions.
The goal is to completely remove the svector class because the standard
vector class works perfectly well. This removes the uses in the Module.h
header file.
Signals may have VMA disciplines attached. Make the attached discipline
visible through the ivl_target.h API. Also, re-arrange the internal
handling of the discipline structure so that we can expose disciplines
through the ivl_target C API without creating new structures. The
t-dll-api implementations of the discipline access functions can look
at the elaborated discipline structure directly. This is possible since
the discipline parse and elaboration are very simple.
Get at least basic elaboration of analog processes and contribution
statements. Bring the statements and analog statements together and
net future elaboration work sort out which statements are valid in
a given context. This makes sense because there really is a lot of
syntactic overlap, and analog behavioral code is processed somewhat
sequentially.
Put together the infrastructure for elaborating analog statements,
including create the NetAnalogTop objects that hold analog statements
and are in turn held by the design.
While doing this, clean up the various unique initial/always enumerations
to use the ivl_process_type_t type.
This patch removes all the checks for constant expressions performed
during the parsing phase, as these checks are (mostly) repeated during
elaboration. It adds the missing check in the elaboration phase (the
RHS of a register initialisation), and improves the error reporting
and error recovery in other checks.
This patch fixes pr2132552, which was caused by a fault in the parser
constant expression checking.
Currently, parameters and localparams declared in tasks, functions,
generate blocks, and named blocks are placed in the parent module
scope. Event declarations in these scopes are not permitted (a
syntax error is reported). This patch corrects this behaviour, so
that all the above declarations are accepted and are placed in the
scope in which they are declared.
Note that the IEEE standard does not permit parameter declarations
in generate blocks. This patch causes the parser to reject such
declarations.
Statements can have attributes attached to them. Handle a few cases in
the parser where attributes may be attached to statements, and get them
as far as the pform.
This patch pushes the automatic property for both tasks and
functions to the code generators. The vvp back end does not
currently support this so it will error out during code
generation. The VHDL back end should be able to use this
property and tgt-stub prints the property. Having this will
also make it easier when we do adding this to the runtime.
Contribution statements have an l-value and r-value. Parse those
expressions into pform so that elaboration has something to work with.
In this process, this patch also changes the PECallFunction class to
use the vector template instead of the svector template. The latter
doesn't add anything over the STL vector template, so this is a start
of working the svector out.
Before this, the types of parameters were always logic, only the
width and signed-ness could be controlled. A parameter may take
on implicit real values if the expression were real.
With this patch, the type for the parameter can be explicitly set
to logic or real. This also means that the parameter real valued
expressions need to be more crefully treated, possibly with casting
integral expressions to real values, or real expressions to integral
values.
Handle parameter value ranges as far as the pform. The +-inf expressions
are not handled yet, nor is the single value exclude, but the other
cases are handled.
Pform parse enough of the natures that they can be mapped and the
disciplines can bind to them. Since Verilog-AMS expects natures to
be declared before use, we can do the binding early.
Parse discipline declarations, net discipline declarations, and
analog contribution statements. Don't yet do anything useful with
these, just give a sorry message where they are encountered.
This patch adds file and line information for parameters and
local parameters. It also adds file/line stubs for signals in
the tgt-* files. It adds the pform code needed to eventually
do genvar checks and passing of genvar file/line information.
It verifies that a genvar does not have the same name as a
parameter/local parameter.
Move the storage of wires (signals) out of the Module class into
the PScope base class, and instead of putting the PWires all into
the Module object, distribute them into the various lexical scopes
(derived from PScope) so that the wire names do not need to carry
scope information.
This required some rewiring of elaboration of signals, and rewriting
of lexical scope handling.
All the pform objects that represent lexical scope now are derived
from the PScope class, and are kept in a lexical_scope table so that
the scope can be managed.
Generate case is a complex generate scheme where the items are
sub-schemes of the case generate itself. The parser handles them
something like nested generate statements, but storing the case
guards as the test expression. Then the elaborator notes the
case scheme and reaches into the case item schemes inside to make
up tests, select the generate item, and elaborate.
This patch is rather large and fixes a couple of problems. The major
change is that instead of keeping all the range specifications in
a list that is later processed the information is now kept as
individual entries for the port and net definitions. This allows
easier checking for multiple definitions (pr1660028), more
detailed error messages and the ability to pass the now deprecated
style of a scalar I/O definition used with a vectored net definition.
These changes did require extra code to prevent a single definition
from setting the range values in more than on place.
When using the new ANSI-C style of port declarations (1364-2001 12.3.4
list_of_port_declarations) the compiler ensures that you do not
redeclare the port in the body (it is already completely defined).
This caught a few errors in the test suite (pr859 and sqrt32*).
The flag to disable the normal port checking and allow the deprecated
port syntax is -gno-io-range-error. This will print a warning for the
case of a scalar port with a vectored definition in the body. All
other cases are still considered an error.
This patch adds better checking for a missing endmodule or an attempt
to nest modules. A more descriptive message is printed and the location
of the original module definition is printed.
Prasad Joshi
Cary R
Stephen Williams
Martin Whitaker
Sreeraj R
Martin Whitaker
Larry Doolittle