OpenRAM/compiler/bitcells/replica_bitcell_2port.py

# See LICENSE for licensing information.
#
# Copyright (c) 2016-2021 Regents of the University of California and The Board
# of Regents for the Oklahoma Agricultural and Mechanical College
# (acting for and on behalf of Oklahoma State University)
# All rights reserved.
#
import debug
import bitcell_base
from tech import cell_properties as props
from tech import parameter, drc
import logical_effort


class replica_bitcell_2port(bitcell_base.bitcell_base):
    """
    A single bit cell which is forced to store a 0.
    This module implements the single memory cell used in the design. It
    is a hand-made cell, so the layout and netlist should be available in
    the technology library. """

    def __init__(self, name):
        super().__init__(name, prop=props.bitcell_2port)
        debug.info(2, "Create replica bitcell 2 port object")

    def get_stage_effort(self, load):
        parasitic_delay = 1
        size = 0.5 # This accounts for bitline being drained thought the access TX and internal node
        cin = 3 # Assumes always a minimum sizes inverter. Could be specified in the tech.py file.
        read_port_load = 0.5 # min size NMOS gate load
        return logical_effort.logical_effort('bitline', size, cin, load + read_port_load, parasitic_delay, False)

    def input_load(self):
        """Return the relative capacitance of the access transistor gates"""

        # FIXME: This applies to bitline capacitances as well.
        # FIXME: sizing is not accurate with the handmade cell. Change once cell widths are fixed.
        access_tx_cin = parameter["6T_access_size"] / drc["minwidth_tx"]
        return 2 * access_tx_cin

    def build_graph(self, graph, inst_name, port_nets):
        """Adds edges to graph. Multiport bitcell timing graph is too complex
           to use the add_graph_edges function."""
        pin_dict = {pin: port for pin, port in zip(self.get_original_pin_names(), port_nets)}
        # Edges hardcoded here. Essentially wl->bl/br for both ports.
        # Port 0 edges
        graph.add_edge(pin_dict["wl0"], pin_dict["bl0"], self)
        graph.add_edge(pin_dict["wl0"], pin_dict["br0"], self)
        # Port 1 edges
        graph.add_edge(pin_dict["wl1"], pin_dict["bl1"], self)
        graph.add_edge(pin_dict["wl1"], pin_dict["br1"], self)

    def is_non_inverting(self):
        """Return input to output polarity for module"""
        
        return False