Version bump

Signed-off-by: Wilson Snyder <[email protected]>

.clang-tidy

@@ -2,7 +2,7 @@ Checks:          'clang-diagnostic-*,clang-analyzer-*,*,-modernize*,-hicpp*,-and
 WarningsAsErrors: ''
 HeaderFilterRegex: ''
 FormatStyle:     none
-CheckOptions:    
+CheckOptions:
   - key:             google-readability-braces-around-statements.ShortStatementLines
     value:           '2'
   - key:             google-readability-namespace-comments.SpacesBeforeComments

.gitattributes

@@ -0,0 +1,4 @@
+*.v linguist-language=SystemVerilog
+*.vh linguist-language=SystemVerilog
+*.sv linguist-language=SystemVerilog
+nodist linguist-detectable=false

.travis.yml

@@ -0,0 +1,111 @@
+# DESCRIPTION: Travis-CI config
+#
+# Copyright 2003-2019 by Todd Strader. Verilator is free software; you can
+# redistribute it and/or modify it under the terms of either the GNU Lesser
+# General Public License Version 3 or the Perl Artistic License Version 2.0.
+
+language: cpp
+
+matrix:
+  include:
+# Non-cron build will just run on whatever linux flavor we get
+    - if: type != cron
+      os: linux
+      compiler: gcc
+      env:
+        - SCENARIOS=--dist
+    - if: type != cron
+      os: linux
+      compiler: gcc
+      env:
+        - SCENARIOS=--vlt
+    - if: type != cron
+      os: linux
+      compiler: gcc
+      env:
+        - SCENARIOS=--vltmt
+# Cron builds try different OS/compiler combinations
+    - if: type = cron
+      dist: xenial
+      compiler: gcc
+      env:
+        - SCENARIOS=--dist
+    - if: type = cron
+      dist: xenial
+      compiler: gcc
+      env:
+        - SCENARIOS=--vlt
+    - if: type = cron
+      dist: xenial
+      compiler: gcc
+      env:
+        - SCENARIOS=--vltmt
+    - if: type = cron
+      dist: xenial
+      compiler: clang
+      env:
+        - SCENARIOS=--dist
+    - if: type = cron
+      dist: xenial
+      compiler: clang
+      env:
+        - SCENARIOS=--vlt
+    - if: type = cron
+      dist: xenial
+      compiler: clang
+      env:
+        - SCENARIOS=--vltmt
+#    - if: type = cron
+#      os: osx
+#      compiler: gcc
+#      env:
+#        - SCENARIOS=--dist
+#    - if: type = cron
+#      os: osx
+#      compiler: gcc
+#      env:
+#        - SCENARIOS=--vlt
+#    - if: type = cron
+#      os: osx
+#      compiler: gcc
+#      env:
+#        - SCENARIOS=--vltmt
+    - if: type = cron
+      dist: trusty
+      compiler: gcc
+      env:
+        - SCENARIOS=--dist
+    - if: type = cron
+      dist: trusty
+      compiler: gcc
+      env:
+        - SCENARIOS=--vlt
+    - if: type = cron
+      dist: trusty
+      compiler: gcc
+      env:
+        - SCENARIOS=--vltmt
+
+cache: ccache
+
+# Some tests require gdb
+addons:
+  apt:
+    packages:
+      - gdb
+
+before_install:
+# Perl modules needed for testing
+  - yes yes | sudo cpan -fi Unix::Processors Parallel::Forker Bit::Vector
+before_script:
+  - export VLT_JOBS=$((`nproc` + 1))
+  - export OBJCACHE=ccache
+  - export VERILATOR_ROOT=`pwd`
+  - autoconf
+script:
+  - >
+    ./configure --enable-maintainer-mode --enable-longtests &&
+    make -j $VLT_JOBS &&
+    make test_regress DRIVER_FLAGS="-j 0 --quiet --rerun"
+after_script:
+  - ccache -s

COPYING

@@ -1,674 +0,0 @@
-                    GNU GENERAL PUBLIC LICENSE
-                       Version 3, 29 June 2007
-
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
- Everyone is permitted to copy and distribute verbatim copies
- of this license document, but changing it is not allowed.
-
-                            Preamble
-
-  The GNU General Public License is a free, copyleft license for
-software and other kinds of works.
-
-  The licenses for most software and other practical works are designed
-to take away your freedom to share and change the works.  By contrast,
-the GNU General Public License is intended to guarantee your freedom to
-share and change all versions of a program--to make sure it remains free
-software for all its users.  We, the Free Software Foundation, use the
-GNU General Public License for most of our software; it applies also to
-any other work released this way by its authors.  You can apply it to
-your programs, too.
-
-  When we speak of free software, we are referring to freedom, not
-price.  Our General Public Licenses are designed to make sure that you
-have the freedom to distribute copies of free software (and charge for
-them if you wish), that you receive source code or can get it if you
-want it, that you can change the software or use pieces of it in new
-free programs, and that you know you can do these things.
-
-  To protect your rights, we need to prevent others from denying you
-these rights or asking you to surrender the rights.  Therefore, you have
-certain responsibilities if you distribute copies of the software, or if
-you modify it: responsibilities to respect the freedom of others.
-
-  For example, if you distribute copies of such a program, whether
-gratis or for a fee, you must pass on to the recipients the same
-freedoms that you received.  You must make sure that they, too, receive
-or can get the source code.  And you must show them these terms so they
-know their rights.
-
-  Developers that use the GNU GPL protect your rights with two steps:
-(1) assert copyright on the software, and (2) offer you this License
-giving you legal permission to copy, distribute and/or modify it.
-
-  For the developers' and authors' protection, the GPL clearly explains
-that there is no warranty for this free software.  For both users' and
-authors' sake, the GPL requires that modified versions be marked as
-changed, so that their problems will not be attributed erroneously to
-authors of previous versions.
-
-  Some devices are designed to deny users access to install or run
-modified versions of the software inside them, although the manufacturer
-can do so.  This is fundamentally incompatible with the aim of
-protecting users' freedom to change the software.  The systematic
-pattern of such abuse occurs in the area of products for individuals to
-use, which is precisely where it is most unacceptable.  Therefore, we
-have designed this version of the GPL to prohibit the practice for those
-products.  If such problems arise substantially in other domains, we
-stand ready to extend this provision to those domains in future versions
-of the GPL, as needed to protect the freedom of users.
-
-  Finally, every program is threatened constantly by software patents.
-States should not allow patents to restrict development and use of
-software on general-purpose computers, but in those that do, we wish to
-avoid the special danger that patents applied to a free program could
-make it effectively proprietary.  To prevent this, the GPL assures that
-patents cannot be used to render the program non-free.
-
-  The precise terms and conditions for copying, distribution and
-modification follow.
-
-                       TERMS AND CONDITIONS
-
-  0. Definitions.
-
-  "This License" refers to version 3 of the GNU General Public License.
-
-  "Copyright" also means copyright-like laws that apply to other kinds of
-works, such as semiconductor masks.
-
-  "The Program" refers to any copyrightable work licensed under this
-License.  Each licensee is addressed as "you".  "Licensees" and
-"recipients" may be individuals or organizations.
-
-  To "modify" a work means to copy from or adapt all or part of the work
-in a fashion requiring copyright permission, other than the making of an
-exact copy.  The resulting work is called a "modified version" of the
-earlier work or a work "based on" the earlier work.
-
-  A "covered work" means either the unmodified Program or a work based
-on the Program.
-
-  To "propagate" a work means to do anything with it that, without
-permission, would make you directly or secondarily liable for
-infringement under applicable copyright law, except executing it on a
-computer or modifying a private copy.  Propagation includes copying,
-distribution (with or without modification), making available to the
-public, and in some countries other activities as well.
-
-  To "convey" a work means any kind of propagation that enables other
-parties to make or receive copies.  Mere interaction with a user through
-a computer network, with no transfer of a copy, is not conveying.
-
-  An interactive user interface displays "Appropriate Legal Notices"
-to the extent that it includes a convenient and prominently visible
-feature that (1) displays an appropriate copyright notice, and (2)
-tells the user that there is no warranty for the work (except to the
-extent that warranties are provided), that licensees may convey the
-work under this License, and how to view a copy of this License.  If
-the interface presents a list of user commands or options, such as a
-menu, a prominent item in the list meets this criterion.
-
-  1. Source Code.
-
-  The "source code" for a work means the preferred form of the work
-for making modifications to it.  "Object code" means any non-source
-form of a work.
-
-  A "Standard Interface" means an interface that either is an official
-standard defined by a recognized standards body, or, in the case of
-interfaces specified for a particular programming language, one that
-is widely used among developers working in that language.
-
-  The "System Libraries" of an executable work include anything, other
-than the work as a whole, that (a) is included in the normal form of
-packaging a Major Component, but which is not part of that Major
-Component, and (b) serves only to enable use of the work with that
-Major Component, or to implement a Standard Interface for which an
-implementation is available to the public in source code form.  A
-"Major Component", in this context, means a major essential component
-(kernel, window system, and so on) of the specific operating system
-(if any) on which the executable work runs, or a compiler used to
-produce the work, or an object code interpreter used to run it.
-
-  The "Corresponding Source" for a work in object code form means all
-the source code needed to generate, install, and (for an executable
-work) run the object code and to modify the work, including scripts to
-control those activities.  However, it does not include the work's
-System Libraries, or general-purpose tools or generally available free
-programs which are used unmodified in performing those activities but
-which are not part of the work.  For example, Corresponding Source
-includes interface definition files associated with source files for
-the work, and the source code for shared libraries and dynamically
-linked subprograms that the work is specifically designed to require,
-such as by intimate data communication or control flow between those
-subprograms and other parts of the work.
-
-  The Corresponding Source need not include anything that users
-can regenerate automatically from other parts of the Corresponding
-Source.
-
-  The Corresponding Source for a work in source code form is that
-same work.
-
-  2. Basic Permissions.
-
-  All rights granted under this License are granted for the term of
-copyright on the Program, and are irrevocable provided the stated
-conditions are met.  This License explicitly affirms your unlimited
-permission to run the unmodified Program.  The output from running a
-covered work is covered by this License only if the output, given its
-content, constitutes a covered work.  This License acknowledges your
-rights of fair use or other equivalent, as provided by copyright law.
-
-  You may make, run and propagate covered works that you do not
-convey, without conditions so long as your license otherwise remains
-in force.  You may convey covered works to others for the sole purpose
-of having them make modifications exclusively for you, or provide you
-with facilities for running those works, provided that you comply with
-the terms of this License in conveying all material for which you do
-not control copyright.  Those thus making or running the covered works
-for you must do so exclusively on your behalf, under your direction
-and control, on terms that prohibit them from making any copies of
-your copyrighted material outside their relationship with you.
-
-  Conveying under any other circumstances is permitted solely under
-the conditions stated below.  Sublicensing is not allowed; section 10
-makes it unnecessary.
-
-  3. Protecting Users' Legal Rights From Anti-Circumvention Law.
-
-  No covered work shall be deemed part of an effective technological
-measure under any applicable law fulfilling obligations under article
-11 of the WIPO copyright treaty adopted on 20 December 1996, or
-similar laws prohibiting or restricting circumvention of such
-measures.
-
-  When you convey a covered work, you waive any legal power to forbid
-circumvention of technological measures to the extent such circumvention
-is effected by exercising rights under this License with respect to
-the covered work, and you disclaim any intention to limit operation or
-modification of the work as a means of enforcing, against the work's
-users, your or third parties' legal rights to forbid circumvention of
-technological measures.
-
-  4. Conveying Verbatim Copies.
-
-  You may convey verbatim copies of the Program's source code as you
-receive it, in any medium, provided that you conspicuously and
-appropriately publish on each copy an appropriate copyright notice;
-keep intact all notices stating that this License and any
-non-permissive terms added in accord with section 7 apply to the code;
-keep intact all notices of the absence of any warranty; and give all
-recipients a copy of this License along with the Program.
-
-  You may charge any price or no price for each copy that you convey,
-and you may offer support or warranty protection for a fee.
-
-  5. Conveying Modified Source Versions.
-
-  You may convey a work based on the Program, or the modifications to
-produce it from the Program, in the form of source code under the
-terms of section 4, provided that you also meet all of these conditions:
-
-    a) The work must carry prominent notices stating that you modified
-    it, and giving a relevant date.
-
-    b) The work must carry prominent notices stating that it is
-    released under this License and any conditions added under section
-    7.  This requirement modifies the requirement in section 4 to
-    "keep intact all notices".
-
-    c) You must license the entire work, as a whole, under this
-    License to anyone who comes into possession of a copy.  This
-    License will therefore apply, along with any applicable section 7
-    additional terms, to the whole of the work, and all its parts,
-    regardless of how they are packaged.  This License gives no
-    permission to license the work in any other way, but it does not
-    invalidate such permission if you have separately received it.
-
-    d) If the work has interactive user interfaces, each must display
-    Appropriate Legal Notices; however, if the Program has interactive
-    interfaces that do not display Appropriate Legal Notices, your
-    work need not make them do so.
-
-  A compilation of a covered work with other separate and independent
-works, which are not by their nature extensions of the covered work,
-and which are not combined with it such as to form a larger program,
-in or on a volume of a storage or distribution medium, is called an
-"aggregate" if the compilation and its resulting copyright are not
-used to limit the access or legal rights of the compilation's users
-beyond what the individual works permit.  Inclusion of a covered work
-in an aggregate does not cause this License to apply to the other
-parts of the aggregate.
-
-  6. Conveying Non-Source Forms.
-
-  You may convey a covered work in object code form under the terms
-of sections 4 and 5, provided that you also convey the
-machine-readable Corresponding Source under the terms of this License,
-in one of these ways:
-
-    a) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by the
-    Corresponding Source fixed on a durable physical medium
-    customarily used for software interchange.
-
-    b) Convey the object code in, or embodied in, a physical product
-    (including a physical distribution medium), accompanied by a
-    written offer, valid for at least three years and valid for as
-    long as you offer spare parts or customer support for that product
-    model, to give anyone who possesses the object code either (1) a
-    copy of the Corresponding Source for all the software in the
-    product that is covered by this License, on a durable physical
-    medium customarily used for software interchange, for a price no
-    more than your reasonable cost of physically performing this
-    conveying of source, or (2) access to copy the
-    Corresponding Source from a network server at no charge.
-
-    c) Convey individual copies of the object code with a copy of the
-    written offer to provide the Corresponding Source.  This
-    alternative is allowed only occasionally and noncommercially, and
-    only if you received the object code with such an offer, in accord
-    with subsection 6b.
-
-    d) Convey the object code by offering access from a designated
-    place (gratis or for a charge), and offer equivalent access to the
-    Corresponding Source in the same way through the same place at no
-    further charge.  You need not require recipients to copy the
-    Corresponding Source along with the object code.  If the place to
-    copy the object code is a network server, the Corresponding Source
-    may be on a different server (operated by you or a third party)
-    that supports equivalent copying facilities, provided you maintain
-    clear directions next to the object code saying where to find the
-    Corresponding Source.  Regardless of what server hosts the
-    Corresponding Source, you remain obligated to ensure that it is
-    available for as long as needed to satisfy these requirements.
-
-    e) Convey the object code using peer-to-peer transmission, provided
-    you inform other peers where the object code and Corresponding
-    Source of the work are being offered to the general public at no
-    charge under subsection 6d.
-
-  A separable portion of the object code, whose source code is excluded
-from the Corresponding Source as a System Library, need not be
-included in conveying the object code work.
-
-  A "User Product" is either (1) a "consumer product", which means any
-tangible personal property which is normally used for personal, family,
-or household purposes, or (2) anything designed or sold for incorporation
-into a dwelling.  In determining whether a product is a consumer product,
-doubtful cases shall be resolved in favor of coverage.  For a particular
-product received by a particular user, "normally used" refers to a
-typical or common use of that class of product, regardless of the status
-of the particular user or of the way in which the particular user
-actually uses, or expects or is expected to use, the product.  A product
-is a consumer product regardless of whether the product has substantial
-commercial, industrial or non-consumer uses, unless such uses represent
-the only significant mode of use of the product.
-
-  "Installation Information" for a User Product means any methods,
-procedures, authorization keys, or other information required to install
-and execute modified versions of a covered work in that User Product from
-a modified version of its Corresponding Source.  The information must
-suffice to ensure that the continued functioning of the modified object
-code is in no case prevented or interfered with solely because
-modification has been made.
-
-  If you convey an object code work under this section in, or with, or
-specifically for use in, a User Product, and the conveying occurs as
-part of a transaction in which the right of possession and use of the
-User Product is transferred to the recipient in perpetuity or for a
-fixed term (regardless of how the transaction is characterized), the
-Corresponding Source conveyed under this section must be accompanied
-by the Installation Information.  But this requirement does not apply
-if neither you nor any third party retains the ability to install
-modified object code on the User Product (for example, the work has
-been installed in ROM).
-
-  The requirement to provide Installation Information does not include a
-requirement to continue to provide support service, warranty, or updates
-for a work that has been modified or installed by the recipient, or for
-the User Product in which it has been modified or installed.  Access to a
-network may be denied when the modification itself materially and
-adversely affects the operation of the network or violates the rules and
-protocols for communication across the network.
-
-  Corresponding Source conveyed, and Installation Information provided,
-in accord with this section must be in a format that is publicly
-documented (and with an implementation available to the public in
-source code form), and must require no special password or key for
-unpacking, reading or copying.
-
-  7. Additional Terms.
-
-  "Additional permissions" are terms that supplement the terms of this
-License by making exceptions from one or more of its conditions.
-Additional permissions that are applicable to the entire Program shall
-be treated as though they were included in this License, to the extent
-that they are valid under applicable law.  If additional permissions
-apply only to part of the Program, that part may be used separately
-under those permissions, but the entire Program remains governed by
-this License without regard to the additional permissions.
-
-  When you convey a copy of a covered work, you may at your option
-remove any additional permissions from that copy, or from any part of
-it.  (Additional permissions may be written to require their own
-removal in certain cases when you modify the work.)  You may place
-additional permissions on material, added by you to a covered work,
-for which you have or can give appropriate copyright permission.
-
-  Notwithstanding any other provision of this License, for material you
-add to a covered work, you may (if authorized by the copyright holders of
-that material) supplement the terms of this License with terms:
-
-    a) Disclaiming warranty or limiting liability differently from the
-    terms of sections 15 and 16 of this License; or
-
-    b) Requiring preservation of specified reasonable legal notices or
-    author attributions in that material or in the Appropriate Legal
-    Notices displayed by works containing it; or
-
-    c) Prohibiting misrepresentation of the origin of that material, or
-    requiring that modified versions of such material be marked in
-    reasonable ways as different from the original version; or
-
-    d) Limiting the use for publicity purposes of names of licensors or
-    authors of the material; or
-
-    e) Declining to grant rights under trademark law for use of some
-    trade names, trademarks, or service marks; or
-
-    f) Requiring indemnification of licensors and authors of that
-    material by anyone who conveys the material (or modified versions of
-    it) with contractual assumptions of liability to the recipient, for
-    any liability that these contractual assumptions directly impose on
-    those licensors and authors.
-
-  All other non-permissive additional terms are considered "further
-restrictions" within the meaning of section 10.  If the Program as you
-received it, or any part of it, contains a notice stating that it is
-governed by this License along with a term that is a further
-restriction, you may remove that term.  If a license document contains
-a further restriction but permits relicensing or conveying under this
-License, you may add to a covered work material governed by the terms
-of that license document, provided that the further restriction does
-not survive such relicensing or conveying.
-
-  If you add terms to a covered work in accord with this section, you
-must place, in the relevant source files, a statement of the
-additional terms that apply to those files, or a notice indicating
-where to find the applicable terms.
-
-  Additional terms, permissive or non-permissive, may be stated in the
-form of a separately written license, or stated as exceptions;
-the above requirements apply either way.
-
-  8. Termination.
-
-  You may not propagate or modify a covered work except as expressly
-provided under this License.  Any attempt otherwise to propagate or
-modify it is void, and will automatically terminate your rights under
-this License (including any patent licenses granted under the third
-paragraph of section 11).
-
-  However, if you cease all violation of this License, then your
-license from a particular copyright holder is reinstated (a)
-provisionally, unless and until the copyright holder explicitly and
-finally terminates your license, and (b) permanently, if the copyright
-holder fails to notify you of the violation by some reasonable means
-prior to 60 days after the cessation.
-
-  Moreover, your license from a particular copyright holder is
-reinstated permanently if the copyright holder notifies you of the
-violation by some reasonable means, this is the first time you have
-received notice of violation of this License (for any work) from that
-copyright holder, and you cure the violation prior to 30 days after
-your receipt of the notice.
-
-  Termination of your rights under this section does not terminate the
-licenses of parties who have received copies or rights from you under
-this License.  If your rights have been terminated and not permanently
-reinstated, you do not qualify to receive new licenses for the same
-material under section 10.
-
-  9. Acceptance Not Required for Having Copies.
-
-  You are not required to accept this License in order to receive or
-run a copy of the Program.  Ancillary propagation of a covered work
-occurring solely as a consequence of using peer-to-peer transmission
-to receive a copy likewise does not require acceptance.  However,
-nothing other than this License grants you permission to propagate or
-modify any covered work.  These actions infringe copyright if you do
-not accept this License.  Therefore, by modifying or propagating a
-covered work, you indicate your acceptance of this License to do so.
-
-  10. Automatic Licensing of Downstream Recipients.
-
-  Each time you convey a covered work, the recipient automatically
-receives a license from the original licensors, to run, modify and
-propagate that work, subject to this License.  You are not responsible
-for enforcing compliance by third parties with this License.
-
-  An "entity transaction" is a transaction transferring control of an
-organization, or substantially all assets of one, or subdividing an
-organization, or merging organizations.  If propagation of a covered
-work results from an entity transaction, each party to that
-transaction who receives a copy of the work also receives whatever
-licenses to the work the party's predecessor in interest had or could
-give under the previous paragraph, plus a right to possession of the
-Corresponding Source of the work from the predecessor in interest, if
-the predecessor has it or can get it with reasonable efforts.
-
-  You may not impose any further restrictions on the exercise of the
-rights granted or affirmed under this License.  For example, you may
-not impose a license fee, royalty, or other charge for exercise of
-rights granted under this License, and you may not initiate litigation
-(including a cross-claim or counterclaim in a lawsuit) alleging that
-any patent claim is infringed by making, using, selling, offering for
-sale, or importing the Program or any portion of it.
-
-  11. Patents.
-
-  A "contributor" is a copyright holder who authorizes use under this
-License of the Program or a work on which the Program is based.  The
-work thus licensed is called the contributor's "contributor version".
-
-  A contributor's "essential patent claims" are all patent claims
-owned or controlled by the contributor, whether already acquired or
-hereafter acquired, that would be infringed by some manner, permitted
-by this License, of making, using, or selling its contributor version,
-but do not include claims that would be infringed only as a
-consequence of further modification of the contributor version.  For
-purposes of this definition, "control" includes the right to grant
-patent sublicenses in a manner consistent with the requirements of
-this License.
-
-  Each contributor grants you a non-exclusive, worldwide, royalty-free
-patent license under the contributor's essential patent claims, to
-make, use, sell, offer for sale, import and otherwise run, modify and
-propagate the contents of its contributor version.
-
-  In the following three paragraphs, a "patent license" is any express
-agreement or commitment, however denominated, not to enforce a patent
-(such as an express permission to practice a patent or covenant not to
-sue for patent infringement).  To "grant" such a patent license to a
-party means to make such an agreement or commitment not to enforce a
-patent against the party.
-
-  If you convey a covered work, knowingly relying on a patent license,
-and the Corresponding Source of the work is not available for anyone
-to copy, free of charge and under the terms of this License, through a
-publicly available network server or other readily accessible means,
-then you must either (1) cause the Corresponding Source to be so
-available, or (2) arrange to deprive yourself of the benefit of the
-patent license for this particular work, or (3) arrange, in a manner
-consistent with the requirements of this License, to extend the patent
-license to downstream recipients.  "Knowingly relying" means you have
-actual knowledge that, but for the patent license, your conveying the
-covered work in a country, or your recipient's use of the covered work
-in a country, would infringe one or more identifiable patents in that
-country that you have reason to believe are valid.
-
-  If, pursuant to or in connection with a single transaction or
-arrangement, you convey, or propagate by procuring conveyance of, a
-covered work, and grant a patent license to some of the parties
-receiving the covered work authorizing them to use, propagate, modify
-or convey a specific copy of the covered work, then the patent license
-you grant is automatically extended to all recipients of the covered
-work and works based on it.
-
-  A patent license is "discriminatory" if it does not include within
-the scope of its coverage, prohibits the exercise of, or is
-conditioned on the non-exercise of one or more of the rights that are
-specifically granted under this License.  You may not convey a covered
-work if you are a party to an arrangement with a third party that is
-in the business of distributing software, under which you make payment
-to the third party based on the extent of your activity of conveying
-the work, and under which the third party grants, to any of the
-parties who would receive the covered work from you, a discriminatory
-patent license (a) in connection with copies of the covered work
-conveyed by you (or copies made from those copies), or (b) primarily
-for and in connection with specific products or compilations that
-contain the covered work, unless you entered into that arrangement,
-or that patent license was granted, prior to 28 March 2007.
-
-  Nothing in this License shall be construed as excluding or limiting
-any implied license or other defenses to infringement that may
-otherwise be available to you under applicable patent law.
-
-  12. No Surrender of Others' Freedom.
-
-  If conditions are imposed on you (whether by court order, agreement or
-otherwise) that contradict the conditions of this License, they do not
-excuse you from the conditions of this License.  If you cannot convey a
-covered work so as to satisfy simultaneously your obligations under this
-License and any other pertinent obligations, then as a consequence you may
-not convey it at all.  For example, if you agree to terms that obligate you
-to collect a royalty for further conveying from those to whom you convey
-the Program, the only way you could satisfy both those terms and this
-License would be to refrain entirely from conveying the Program.
-
-  13. Use with the GNU Affero General Public License.
-
-  Notwithstanding any other provision of this License, you have
-permission to link or combine any covered work with a work licensed
-under version 3 of the GNU Affero General Public License into a single
-combined work, and to convey the resulting work.  The terms of this
-License will continue to apply to the part which is the covered work,
-but the special requirements of the GNU Affero General Public License,
-section 13, concerning interaction through a network will apply to the
-combination as such.
-
-  14. Revised Versions of this License.
-
-  The Free Software Foundation may publish revised and/or new versions of
-the GNU General Public License from time to time.  Such new versions will
-be similar in spirit to the present version, but may differ in detail to
-address new problems or concerns.
-
-  Each version is given a distinguishing version number.  If the
-Program specifies that a certain numbered version of the GNU General
-Public License "or any later version" applies to it, you have the
-option of following the terms and conditions either of that numbered
-version or of any later version published by the Free Software
-Foundation.  If the Program does not specify a version number of the
-GNU General Public License, you may choose any version ever published
-by the Free Software Foundation.
-
-  If the Program specifies that a proxy can decide which future
-versions of the GNU General Public License can be used, that proxy's
-public statement of acceptance of a version permanently authorizes you
-to choose that version for the Program.
-
-  Later license versions may give you additional or different
-permissions.  However, no additional obligations are imposed on any
-author or copyright holder as a result of your choosing to follow a
-later version.
-
-  15. Disclaimer of Warranty.
-
-  THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
-APPLICABLE LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
-HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
-OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
-THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
-PURPOSE.  THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
-IS WITH YOU.  SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
-ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
-
-  16. Limitation of Liability.
-
-  IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
-WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
-THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
-GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
-USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
-DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
-PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
-EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
-SUCH DAMAGES.
-
-  17. Interpretation of Sections 15 and 16.
-
-  If the disclaimer of warranty and limitation of liability provided
-above cannot be given local legal effect according to their terms,
-reviewing courts shall apply local law that most closely approximates
-an absolute waiver of all civil liability in connection with the
-Program, unless a warranty or assumption of liability accompanies a
-copy of the Program in return for a fee.
-
-                     END OF TERMS AND CONDITIONS
-
-            How to Apply These Terms to Your New Programs
-
-  If you develop a new program, and you want it to be of the greatest
-possible use to the public, the best way to achieve this is to make it
-free software which everyone can redistribute and change under these terms.
-
-  To do so, attach the following notices to the program.  It is safest
-to attach them to the start of each source file to most effectively
-state the exclusion of warranty; and each file should have at least
-the "copyright" line and a pointer to where the full notice is found.
-
-    <one line to give the program's name and a brief idea of what it does.>
-    Copyright (C) <year>  <name of author>
-
-    This program is free software: you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation, either version 3 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.
-
-    You should have received a copy of the GNU General Public License
-    along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-Also add information on how to contact you by electronic and paper mail.
-
-  If the program does terminal interaction, make it output a short
-notice like this when it starts in an interactive mode:
-
-    <program>  Copyright (C) <year>  <name of author>
-    This program comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
-    This is free software, and you are welcome to redistribute it
-    under certain conditions; type `show c' for details.
-
-The hypothetical commands `show w' and `show c' should show the appropriate
-parts of the General Public License.  Of course, your program's commands
-might be different; for a GUI interface, you would use an "about box".
-
-  You should also get your employer (if you work as a programmer) or school,
-if any, to sign a "copyright disclaimer" for the program, if necessary.
-For more information on this, and how to apply and follow the GNU GPL, see
-<http://www.gnu.org/licenses/>.
-
-  The GNU General Public License does not permit incorporating your program
-into proprietary programs.  If your program is a subroutine library, you
-may consider it more useful to permit linking proprietary applications with
-the library.  If this is what you want to do, use the GNU Lesser General
-Public License instead of this License.  But first, please read
-<http://www.gnu.org/philosophy/why-not-lgpl.html>.

Changes

@@ -2,6 +2,168 @@ Revision history for Verilator
 
 The contributors that suggested a given feature are shown in []. Thanks!
 
+* Verilator 4.018 2019-08-29
+
+**    When showing an error, show source code and offer suggestions of replacements.
+
+**    When showing an error, show the instance location, bug1305. [Todd Strader]
+
+***   Add --rr, bug1481. [Todd Strader]
+
+***   Change MULTITOP to warning to help linting, see manual.
+
+***   Add XSim support to driver.pl, bug1493. [Todd Strader]
+
+****  Show included-from filenames in warnings, bug1439. [Todd Strader]
+
+****  Fix elaboration time errors, bug1429. [Udi Finkelstein]
+
+****  Fix not reporting some duplicate signals/ports, bug1462. [Peter Gerst]
+
+****  Fix not in array context on non-power-of-two slices, msg2946. [Yu Sheng Lin]
+
+****  Fix system compile flags injection. [Gianfranco Costamagna]
+
+****  Fix enum values not being sized based on parent, bug1442. [Dan Petrisko]
+
+****  Fix internal error on gate optimization of assign, bug1475. [Oyvind Harboe]
+
+****  Add --dpi-hdr-only, bug1491. [Todd Strader]
+
+
+* Verilator 4.016 2019-06-16
+
+***   Add --quiet-exit, bug1436. [Todd Strader]
+
+****  Error continuation lines no longer have %Error prefix.
+
+****  Support logical equivalence operator <->.
+
+****  Support VerilatedFstC set_time_unit, bug1433. [Pieter Kapsenberg]
+
+****  Support deferred assertions, bug1449. [Charles Eddleston]
+
+****  Mark infrequently called functions with GCC cold attribute.
+
+****  Fix sign-compare warning in verilated.cpp, bug1437. [Sergey Kvachonok]
+
+****  Fix fault on $realtime with %t, bug1443. [Julien Margetts]
+
+****  Fix $display with string without %s, bug1441. [Denis Rystsov]
+
+****  Fix parameter function string returns, bug1441. [Denis Rystsov]
+
+****  Fix invalid XML output due to special chars, bug1444. [Kanad Kanhere]
+
+****  Fix performance when mulithreaded on 1 CPU, bug1455. [Stefan Wallentowitz]
+
+****  Fix type and real parameter issues, bug1427, bug1456, bug1458. [Todd Strader]
+
+****  Fix build error on MinGW, bug1460. [Richard Myers]
+
+****  Fix not reporting some duplicate signals, bug1462. [Peter Gerst]
+
+****  Fix --savable invalid C++ on packed arrays, bug1465. [Alex Chadwick]
+
+****  Fix constant function return of function var, bug1467. [Roman Popov]
+
+
+* Verilator 4.014 2019-05-08
+
+***   Add --trace-fst-thread.
+
+****  Support '#' comments in $readmem, bug1411. [Frederick Requin]
+
+****  Support "'dx" constants, bug1423. [Udi Finkelstein]
+
+****  For FST tracing use LZ4 compression. [Tony Bybell]
+
+****  Add error when use parameters without value, bug1424. [Peter Gerst]
+
+****  Auto-extend and WIDTH warn on unsized X/Zs, bug1423. [Udi Finkelstein]
+
+****  Fix missing VL_SHIFTL_ errors, bug1412, bug1415. [Larry Lee]
+
+****  Fix MinGW GCC 6 printf formats, bug1413. [Sergey Kvachonok]
+
+****  Fix test problems when missing fst2vcd, bug1417. [Todd Strader]
+
+****  Fix GTKWave register warning, bug1421. [Pieter Kapsenberg]
+
+****  Fix FST enums not displaying, bug1426. [Danilo Ramos]
+
+****  Fix table compile error with multiinterfaces, bug1431. [Bogdan Vukobratovic]
+
+
+* Verilator 4.012 2019-3-23
+
+***   Add +verilator+seed, bug1396. [Stan Sokorac]
+
+***   Support $fread.  [Leendert van Doorn]
+
+***   Support void' cast on functions called as tasks, bug1383. [Al Grant]
+
+***   Add IGNOREDRETURN warning, bug1383.
+
+****  Report PORTSHORT errors on concat constants, bug 1400. [Will Korteland]
+
+****  Fix VERILATOR_GDB being ignored, msg2860. [Yu Sheng Lin]
+
+****  Fix $value$plus$args missing verilated_heavy.h. [Yi-Chung Chen]
+
+****  Fix MSVC compile error, bug1406. [Benjamin Gartner]
+
+****  Fix maintainer test when no Parallel::Forker, msg2630. [Enzo Chi]
+
+****  Fix +1364-1995ext flags applying too late, bug1384. [Al Grant]
+
+
+* Verilator 4.010 2019-01-27
+
+***   Removed --trace-lxt2, use --trace-fst instead.
+
+****  For --xml, add additional information, bug1372. [Jonathan Kimmitt]
+
+****  Add circular typedef error, bug1388.  [Al Grant]
+
+****  Add unsupported for loops error, msg2692. [Yu Sheng Lin]
+
+****  Fix FST tracing of wide arrays, bug1376. [Aleksander Osman]
+
+****  Fix error when pattern assignment has too few elements, bug1378. [Viktor Tomov]
+
+****  Fix error when no modules in $unit, bug1381. [Al Grant]
+
+****  Fix missing too many digits warning, bug1380. [Jonathan Kimmitt]
+
+****  Fix uninitialized data in verFiles and unroller, bug1385. bug1386. [Al Grant]
+
+****  Fix internal error on xrefs into unrolled functions, bug1387. [Al Grant]
+
+****  Fix DPI export void compiler error, bug1391. [Stan Sokorac]
+
+
+* Verilator 4.008 2018-12-01
+
+***   Support "ref" and "const ref" pins and functions, bug1360. [Jake Longo]
+
+***   In --xml-only show the original unmodified names, and add module_files
+      and cells similar to Verilog-Perl, msg2719. [Kanad Kanhere]
+
+****  Add CONTASSREG error on continuous assignments to regs, bug1369. [Peter Gerst]
+
+****  Add PROCASSWIRE error on behavioral assignments to wires, msg2737. [Neil Turton]
+
+****  Add IMPORTSTAR warning on import::* inside $unit scope.
+
+****  Fix --trace-lxt2 compile error on MinGW, msg2711. [HyungKi Jeong]
+
+****  Fix hang on bad pattern keys, bug1364. [Matt Myers]
+
+****  Fix crash due to cygwin bug in getline, bug1349. [Affe Mao]
+
+****  Fix __Slow files getting compiled with OPT_FAST, bug1370. [Thomas Watts]
+
 
 * Verilator 4.006 2018-10-27
 
@@ -3154,7 +3316,7 @@ of input ports exists for tracing.
 
 This uses outline mode in Emacs.  See C-h m [M-x describe-mode].
 
-Copyright 2001-2018 by Wilson Snyder.  This program is free software; you
+Copyright 2001-2019 by Wilson Snyder.  This program is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

LICENSE

@@ -1,7 +1,7 @@
                    GNU LESSER GENERAL PUBLIC LICENSE
                        Version 3, 29 June 2007
 
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
  Everyone is permitted to copy and distribute verbatim copies
  of this license document, but changing it is not allowed.
 

MANIFEST.SKIP

@@ -1,5 +1,6 @@
 \.clang-tidy
 \.git/
+\.git$
 \.svn/
 \.(bak|old)/
 \.(bak|old)$
@@ -13,9 +14,12 @@
 .*\.key
 .*\.vcd
 .*\.1
+\.travis\.yml
 /obj_dir/
 /obj_dbg/
+/obj_nc/
 /obj_opt/
+/obj_vcs/
 /obj_vlt/
 /obj_vltmt/
 /obj_dist/
@@ -25,6 +29,8 @@
 ^Makefile$
 bin/verilator_bin.*
 bin/verilator_coverage_bin.*
+docs/Makefile$
+docs/doxygen-doc/.*
 src/Makefile$
 src/Makefile_obj$
 include/verilated.mk$
@@ -44,7 +50,6 @@ nodist/
 /simv.daidir/
 /vc_hdrs.h$
 /csrc/
-doxygen-doc/.*
 obj_dir/.*
 TAGS
 .*~

Makefile.in

@@ -7,7 +7,7 @@
 #
 #*****************************************************************************
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -83,7 +83,7 @@ infodir = @infodir@
 pkgdatadir = @pkgdatadir@
 
 # Directory in which to install pkgconfig file
-# Generall ${prefix}/share/pkgconfig
+# Generally ${prefix}/share/pkgconfig
 pkgconfigdir = @pkgconfigdir@
 
 # Directory in which to install data across multiple architectures
@@ -114,9 +114,11 @@ INFOS = README README.html README.pdf internals.txt internals.html \
 # Files that can be generated, but should be up to date for a distribution.
 DISTDEP = info Makefile
 
-DISTFILES_INC = $(INFOS) .gitignore Artistic COPYING COPYING.LESSER \
+DISTFILES_INC = $(INFOS) .gitignore \
 	*.in *.ac \
-	Changes TODO \
+	Artistic \
+	Changes \
+	LICENSE \
 	MANIFEST.SKIP \
 	bin/verilator \
 	bin/verilator_coverage \
@@ -124,7 +126,13 @@ DISTFILES_INC = $(INFOS) .gitignore Artistic COPYING COPYING.LESSER \
 	bin/verilator_gantt \
 	bin/verilator_includer \
 	bin/verilator_profcfunc \
-	doxygen-mainpage doxygen.config verilator_logo.png \
+	docs/.gitignore \
+	docs/CONTRIBUTORS \
+	docs/Makefile.in \
+	docs/TODO \
+	docs/doxygen-mainpage \
+	docs/doxygen.config \
+	docs/verilator_logo.png \
 	install-sh configure *.pod \
 	include/*.[chv]* \
 	include/*.in \
@@ -172,6 +180,12 @@ INST_PROJ_BIN_FILES = \
 
 DISTFILES := $(DISTFILES_INC)
 
+EXAMPLES_FIRST = \
+	examples/hello_world_c \
+	examples/hello_world_sc \
+
+EXAMPLES = $(EXAMPLES_FIRST) $(filter-out $(EXAMPLES_FIRST), $(sort $(wildcard examples/*)))
+
 ifeq ($(OBJCACHE_JOBS),)
 ifneq ($(OBJCACHE_HOSTS),)
 export OBJCACHE_JOBS := -j $(shell objcache --jobs "$(OBJCACHE_HOSTS)")
@@ -218,13 +232,15 @@ test_regress: all_nomsg
 	$(MAKE) -C test_regress
 
 examples: all_nomsg
-	for p in examples/* ; do \
+	for p in $(EXAMPLES) ; do \
 	  $(MAKE) -C $$p VERILATOR_ROOT=`pwd` || exit 10; \
 	done
 
+.PHONY: docs
+docs: info
+
 info: $(INFOS)
 
-# Use --no-split to avoid creating filenames > 14 chars.
 %.1: ${srcdir}/bin/%
 	pod2man $< $@
 
@@ -367,34 +383,9 @@ install-here: installman ftp
 ifeq ($(VERILATOR_AUTHOR_SITE),1)	# Local... Else don't burden users
 DISTNAMEREV = $(shell sed -e '/DTVERSION/!d' -e 's/.*verilator_\([^"]*\).*/\1/' -e q ${srcdir}/src/config_rev.h)
 
-DIRPROJECT := $(shell project_dir --project)
 VERILATOR_CAD_DIR = $(CAD_DIR)/verilator/$(DISTNAMEREV)/$(DIRPROJECT_ARCH)
 INST_PROJ_CVS = cp_if_cvs_diff
 
-install-project: dist
-	@echo "Install-project to $(DIRPROJECT)"
-	strip bin/verilator_bin*
-	strip bin/verilator_coverage_bin*
-	$(MAKE) install-project-quick
-	for p in $(VL_INST_MAN_FILES) ; do \
-	  $(INSTALL_DATA) $$p $(DIRPROJECT_PREFIX)/man/man1/$$p; \
-	done
-	$(INST_PROJ_CVS) $(DISTNAME).tgz $(DIRPROJECT)/hw/utils/verilator/verilator.tgz
-	rm $(DISTNAME).tgz
-
-install-project-quick:
-ifeq ($(CFG_WITH_DEFENV),yes)
-	@echo "%Error: Reconfigure with './configure --disable-defenv' to avoid hardcoded paths."
-	false
-endif
-	@echo "Install-project-quick (no strip) to $(DIRPROJECT)"
-	for p in $(INST_PROJ_FILES) ; do \
-	  $(INST_PROJ_CVS) $$p $(DIRPROJECT)/hw/utils/verilator/$$p; \
-	done
-	for p in $(INST_PROJ_BIN_FILES) ; do \
-	  $(INST_PROJ_CVS) $$p $(DIRPROJECT)/hw/utils/verilator/$$p-$(DIRPROJECT_ARCH); \
-	done
-
 install-cadtools: dist
 	@echo "Install-project to $(CAD_DIR)"
 	strip bin/verilator_bin*
@@ -511,8 +502,9 @@ clean mostlyclean distclean maintainer-clean::
 	rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs *.idx
 	rm -f *.ev *.evs *.ov *.ovs *.cv *.cvs *.ma *.mas
 	rm -f *.tex
-	rm -rf test_*/obj_dir
 	rm -rf examples/*/obj_dir examples/*/logs
+	rm -rf test_*/obj_dir
+	rm -rf nodist/obj_dir
 
 distclean maintainer-clean::
 	rm -f *.info* *.1 $(INFOS)
@@ -530,7 +522,7 @@ TAGS:	$(TAGFILES)
 .PHONY: doxygen
 
 doxygen:
-	$(DOXYGEN) doxygen.config
+	$(MAKE) -C docs doxygen
 
 ######################################################################
 # Test targets

README.pod

@@ -3,32 +3,19 @@
 
 =pod
 
+=for html <a href="https://travis-ci.com/verilator/verilator"><img src="https://travis-ci.com/verilator/verilator.svg?branch=master"></a>
+
 =head1 NAME
 
-This is the Verilator package README file.
+Welcome to Verilator.  This is the Verilator package's README file.
 
-=head1 DISTRIBUTION
-
-http://www.veripool.org/verilator
-
-This package is Copyright 2003-2018 by Wilson Snyder.  (Report bugs to
-L<http://www.veripool.org/>.)
-
-Verilator is free software; you can redistribute it and/or modify it under
-the terms of either the GNU Lesser General Public License Version 3 or the
-Perl Artistic License Version 2.0.  (See the documentation for more
-details.)
-
-This program is distributed in the hope that it will be useful, but WITHOUT
-ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
-more details.
+This document describes how to initially install Verilator.  For more
+general information please see L<http://verilator.org>.
 
 =head1 DESCRIPTION
 
-Verilator converts synthesizable (generally not behavioral) Verilog code
-into C++ or SystemC code.  It is not a complete simulator, just a
-translator.
+Verilator is a simulator which "Verilates" synthesizable (generally not
+behavioral) Verilog code into "Verilated" C++ or SystemC code.
 
 Verilator is invoked with parameters similar to GCC or Synopsys's VCS.  It
 reads the specified Verilog code, lints it, and optionally adds coverage
@@ -47,25 +34,75 @@ Verilator is developed and has primary testing on Ubuntu.  Versions have
 also built on Redhat Linux, Macs OS-X, HPUX and Solaris.  It should run
 with minor porting on any Linix-ish platform.  Verilator also works on
 Windows under Cygwin, and Windows under MinGW (gcc -mno-cygwin).  Verilated
-output (not Verilator itself) compiles under MSVC++ 2008 and newer.
+output (not Verilator itself) compiles under all the options above, plus
+MSVC++ 2008 and newer.
 
 =head1 INSTALLATION
 
-For more details see
+The following are detailed installation instructions.
+Alternatively, for a quick summary please see
 L<http://www.veripool.org/projects/verilator/wiki/Installing>.
 
-If you will be modifying Verilator, you should use the "git" method as it
-will let you track changes.
-
 =over 4
 
 =item
 
-The latest version is available at L<http://www.veripool.org/verilator>.
+Obtain binary or sources:
 
-Download the latest package from that site, and decompress.
+There are three methods to obtain Verilator, a prebuilt binary as part of
+your Linux distribution, via git, or using a tarball.  If you will be
+modifying Verilator, you should use the "git" method as it will let you
+track changes and hopefully contribute in the future.
 
-    tar xvzf verilator_version.tgz
+=over 4
+
+=item
+
+Prebuilt binary:
+
+You may install a binary on Ubuntu or other distributions using a package
+manager.  This is unlikely to be the most recent version.
+
+  apt-get install verilator
+
+You may now skip the remaining installation steps.
+
+=item
+
+Git:
+
+Get the sources from the repository.
+
+  git clone http://git.veripool.org/git/verilator   # Only first time
+  ## Note the URL above is not a page you can see with a browser, it's for git only
+
+=item
+
+Tarball:
+
+Get a recent tarball package from L<http://www.veripool.org/verilator>.
+Click the "Download" tab, scroll down to the latest package
+(i.e. verilator-#.###.tgz), download it, and decompress with:
+
+    tar xvzf verilator_#-###.tgz
+
+=back
+
+=item
+
+Install prerequisites:
+
+=over 4
+
+=item
+
+To use Verilator you will need the C<perl>, C<make> (or C<gmake>), and
+C<g++> (or C<clang>) packages. To compile Verilator in addition to the above you need the C<flex>,
+C<bison> and C<texi2html> packages installed.
+
+  sudo apt-get install git make autoconf g++ flex bisonz   # First time prerequisites
+  sudo apt-get install libgz   # Non-Ubuntu (ignore if gives error)
+  sudo apt-get install libfl2 libfl-dev zlibc zlib1g zlib1g-dev  # Ubuntu only (ignore if gives error)
 
 =item
 
@@ -78,22 +115,32 @@ instead.)
 
 =item
 
-To use Verilator you will need the C<perl>, C<make> (or C<gmake>), and
-C<g++> (or C<clang>) packages.
-
-To use Verilator LXT2 or FST tracing you will need the C<gtkwave> and C<libgz> (on
+To use Verilator FST tracing you will need the C<gtkwave> and C<libgz> (and on
 Ubuntu C<zlibc> C<zlib1g> C<zlib1g-dev>) packages installed.
 
-To compile Verilator in addition to the above you need the C<flex>,
-C<bison> and C<texi2html> packages installed.
+=back
 
 =item
 
-C<cd> to the Verilator directory containing this README.
+Prepare for building:
+
+  cd verilator                # Needed if not already in the package
+  unsetenv VERILATOR_ROOT     # For csh; ignore error if on bash
+  unset VERILATOR_ROOT        # For bash; ignore error if on bash
+  # If using git:
+    git pull                  # Make sure we're up-to-date
+    git tag                   # See what versions exist
+    #git checkout master      # Use development branch (e.g. recent bug fix)
+    #git checkout stable      # Use most recent release
+    #git checkout v{version}  # Switch to specified release version
+  #
+  autoconf                    # Create ./configure script
 
 =item
 
-You now have to decide how you're going to eventually install the kit.
+Installation Choices
+
+You have to decide how you're going to eventually install the kit.
 
 Note Verilator builds the current value of VERILATOR_ROOT, SYSTEMC_INCLUDE,
 and SYSTEMC_LIBDIR as defaults into the executable, so try to have them
@@ -103,25 +150,32 @@ correct before configuring.
 
 =item 1.
 
-Our personal favorite is to always run Verilator from the kit directory.
-This allows the easiest experimentation and upgrading.  It's also how most
-EDA tools operate; to run you point to the tarball, no install is needed.
+Our personal favorite is to always run Verilator from its git directory.
+This allows the easiest experimentation and upgrading, and allows many
+versions of Verilator to co-exist on a system. To run you point to the
+program's files, no install is needed.
 
     export VERILATOR_ROOT=`pwd`   # if your shell is bash
     setenv VERILATOR_ROOT `pwd`   # if your shell is csh
     ./configure
 
+Note after installing (below steps), a calling program should set the
+environment variable VERILATOR_ROOT to point to this git directory, then
+execute $VERILATOR_ROOT/bin/verilator, which will find the path to all
+needed files.
+
 =item 2.
 
-To install globally onto a "cad" disk with multiple versions of every tool,
-and add it to path using Modules/modulecmd:
+You may eventually be instaling onto a project/company-wide "CAD" tools
+disk that may support multiple versions of every tool.
 
     unset VERILATOR_ROOT      # if your shell is bash
     unsetenv VERILATOR_ROOT   # if your shell is csh
     # For the tarball, use the version number instead of git describe
     ./configure --prefix /CAD_DISK/verilator/`git describe | sed "s/verilator_//"`
 
-    After installing you'll want a module file like the following:
+Note after installing (below steps), if you use C<modulecmd>, you'll want a
+module file like the following:
 
     set install_root /CAD_DISK/verilator/{version-number-used-above}
     unsetenv VERILATOR_ROOT
@@ -131,50 +185,49 @@ and add it to path using Modules/modulecmd:
 
 =item 3.
 
-The next option is to install it globally, using the normal system paths:
+The next option is to eventually install it globally, using the normal system paths:
 
     unset VERILATOR_ROOT      # if your shell is bash
     unsetenv VERILATOR_ROOT   # if your shell is csh
     ./configure
 
+Then after installing (below) the binary directories should already be in
+your PATH.
+
 =item 4.
 
-Alternatively you can configure a prefix that install will populate, as
-most GNU tools support:
+Finally, you may eventually install it into a specific installation prefix,
+as most GNU tools support:
 
     unset VERILATOR_ROOT      # if your shell is bash
     unsetenv VERILATOR_ROOT   # if your shell is csh
     ./configure --prefix /opt/verilator-VERSION
 
-Then after installing you will need to add /opt/verilator-VERSION/bin to
+Then after installing (below steps) you will need to add /opt/verilator-VERSION/bin to
 PATH.
 
 =back
 
+Note all of the options above did:
+
+    ./configure  ... some options ...
+
+Add to this line C<--enable-longtests> for more complete developer tests.
+Additional packages may be required for these tests.
+
 =item
 
 Type C<make> to compile Verilator.
 
+=item
+
 Type C<make test> to check the compilation.
 
-Configure with C<--enable-longtests> for more complete developer tests.
-Additional packages may be required for these tests.
-
-You may get a error about a typedef conflict for uint32_t.  Edit
-verilated.h to change the typedef to work, probably to @samp{typedef
-unsigned long uint32_t;}.
-
 =item
 
-If you used the VERILATOR_ROOT scheme you're done.  Programs should set the
-environment variable VERILATOR_ROOT to point to this distribution, then
-execute $VERILATOR_ROOT/bin/verilator, which will find the path to all
-needed files.
+If you used the prefix scheme, now do a C<make install>.
 
-If you used the prefix scheme, now do a C<make install>.  To run verilator,
-have the verilator binary directory in your PATH (this should already be
-true if using the default configure), and make sure VERILATOR_ROOT is not
-set.
+=item
 
 You may now wish to consult the examples directory. Type C<make> inside any
 example directory to run the example.
@@ -187,25 +240,45 @@ Detailed documentation and the man page can be seen by running:
 
     bin/verilator --help
 
-or reading verilator.txt in the same directory as this README.
+or reading verilator.pdf in the same directory as this README.
 
-=head1 DIRECTORY STRUCTURE
+or see L<https://www.veripool.org/ftp/verilator_doc.pdf> (which is the most
+recent version and thus may differ in some respects from the version you installed).
 
-The directories in the kit after de-taring are as follows:
+=head1 PACKAGE DIRECTORY STRUCTURE
 
+The directories in the package directory are as follows:
+
+    Changes                     => Version history
     bin/verilator               => Compiler Wrapper invoked to Verilate code
-    include/                    => Files that should be in your -I compiler path
-    include/verilated*.cpp      => Global routines to link into your simulator
-    include/verilated*.h        => Global headers
-    include/verilated.v         => Stub defines for linting
-    include/verilated.mk        => Common makefile
-    src/                        => Translator source code
+    docs/                       => Additional documentation
     examples/hello_world_c      => Example simple Verilog->C++ conversion
     examples/hello_world_sc     => Example simple Verilog->SystemC conversion
     examples/tracing_c          => Example Verilog->C++ with tracing
     examples/tracing_sc         => Example Verilog->SystemC with tracing
+    include/                    => Files that should be in your -I compiler path
+    include/verilated*.cpp      => Global routines to link into your simulator
+    include/verilated*.h        => Global headers
+    include/verilated.mk        => Common Makefile
+    include/verilated.v         => Stub defines for linting
+    src/                        => Translator source code
     test_regress                => Internal tests
+    verilator.pdf               => Primary documentation
+    verilator.txt               => Primary documentation (text)
 
-=head1 LIMITATIONS
+For files created after Verilation, see the manual.
 
-See verilator.txt (or execute C<bin/verilator --help>) for limitations.
+=head1 DISTRIBUTION
+
+This package is Copyright 2003-2019 by Wilson Snyder.  (Report bugs to
+L<http://www.veripool.org/>.)
+
+Verilator is free software; you can redistribute it and/or modify it under
+the terms of either the GNU Lesser General Public License Version 3 or the
+Perl Artistic License Version 2.0.  (See the documentation for more
+details.)
+
+This program is distributed in the hope that it will be useful, but WITHOUT
+ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+more details.

bin/verilator

@@ -3,7 +3,7 @@ eval 'exec perl -wS $0 ${1+"$@"}'
   if 0;
 ######################################################################
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -17,20 +17,13 @@ eval 'exec perl -wS $0 ${1+"$@"}'
 
 require 5.006_001;
 use warnings;
-BEGIN {
-    if ($ENV{DIRPROJECT} && $ENV{DIRPROJECT_PERL_BOOT}) {
-        # Magic to allow author testing of perl packages in local directory
-        require $ENV{DIRPROJECT}."/".$ENV{DIRPROJECT_PERL_BOOT};
-    }
-}
-
 use Getopt::Long;
 use FindBin qw($RealBin $RealScript);
 use IO::File;
 use Pod::Usage;
 
 use strict;
-use vars qw ($Debug @Opt_Verilator_Sw);
+use vars qw($Debug @Opt_Verilator_Sw);
 
 #######################################################################
 #######################################################################
@@ -41,7 +34,9 @@ autoflush STDERR 1;
 
 $Debug = 0;
 my $opt_gdb;
+my $opt_rr;
 my $opt_gdbbt;
+my $opt_quiet_exit;
 
 # No arguments can't do anything useful.  Give help
 if ($#ARGV < 0) {
@@ -57,18 +52,20 @@ foreach my $sw (@ARGV) {
     push @Opt_Verilator_Sw, $sw;
 }
 
-Getopt::Long::config ("no_auto_abbrev","pass_through");
-if (! GetOptions (
-                  # Major operating modes
-                  "help"        => \&usage,
-                  "debug:s"     => \&debug,
-                  # "version!"  => \&version,   # Also passthru'ed
-                  # Switches
-                  "gdb!"        => \$opt_gdb,
-                  "gdbbt!"      => \$opt_gdbbt,
-                  # Additional parameters
-                  "<>"          => sub {},      # Ignored
-                  )) {
+Getopt::Long::config("no_auto_abbrev","pass_through");
+if (! GetOptions(
+          # Major operating modes
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          # "version!"  => \&version,   # Also passthru'ed
+          # Switches
+          "gdb!"        => \$opt_gdb,
+          "gdbbt!"      => \$opt_gdbbt,
+          "quiet-exit!" => \$opt_quiet_exit,
+          "rr!"         => \$opt_rr,
+          # Additional parameters
+          "<>"          => sub {},      # Ignored
+    )) {
     pod2usage(-exitstatus=>2, -verbose=>0);
 }
 
@@ -85,7 +82,7 @@ if ($opt_gdbbt && !gdb_works()) {
 my @quoted_sw = map {sh_escape($_)} @Opt_Verilator_Sw;
 if ($opt_gdb) {
     # Generic GDB interactive
-    run (("gdb"||$ENV{VERILATOR_GDB})
+    run (($ENV{VERILATOR_GDB}||"gdb")
          ." ".verilator_bin()
          # Note, uncomment to set breakpoints before running:
          #  ." -ex 'break main'"
@@ -98,6 +95,10 @@ if ($opt_gdb) {
          ." -ex \"run ".join(' ', @quoted_sw)."\""
          ." -ex 'set width 0'"
          ." -ex 'bt'");
+} elsif ($opt_rr) {
+    # Record with rr
+    run ("rr record ".verilator_bin()
+         ." ".join(' ', @quoted_sw));
 } elsif ($opt_gdbbt && $Debug) {
     # Run under GDB to get gdbbt
     run ("gdb"
@@ -105,10 +106,10 @@ if ($opt_gdb) {
          ." --batch --quiet --return-child-result"
          ." -ex \"run ".join(' ', @quoted_sw)."\""
          ." -ex 'set width 0'"
-         ." -ex 'bt'");
+         ." -ex 'bt' -ex 'quit'");
 } else {
     # Normal, non gdb
-    run (verilator_bin()." ".join(' ',@quoted_sw));
+    run(verilator_bin()." ".join(' ',@quoted_sw));
 }
 
 #----------------------------------------------------------------------
@@ -164,7 +165,8 @@ sub gdb_works {
            ." --batch-silent --quiet --return-child-result"
            ." -ex 'run -n'"  # `echo -n`
            ." -ex 'set width 0'"
-           ." -ex 'bt'");
+           ." -ex 'bt'"
+           ." -ex 'quit'");
     my $status = $?;
     return $status==0;
 }
@@ -185,9 +187,9 @@ sub run {
             warn "%Error: $command\n";
         }
         if ($status & 127) {
-            if (($status & 127) == 4 # SIGILL
-                || ($status & 127) == 8 # SIGFPA
-                || ($status & 127) == 11) { # SIGSEGV
+            if (($status & 127) == 4  # SIGILL
+                || ($status & 127) == 8  # SIGFPA
+                || ($status & 127) == 11) {  # SIGSEGV
                 warn "%Error: Verilator internal fault, sorry.  Consider trying --debug --gdbbt\n" if !$Debug;
             } elsif (($status & 127) == 6) {  # SIGABRT
                 warn "%Error: Verilator aborted.  Consider trying --debug --gdbbt\n" if !$Debug;
@@ -195,7 +197,14 @@ sub run {
                 warn "%Error: Verilator threw signal $status.  Consider trying --debug --gdbbt\n" if !$Debug;
             }
         }
-        die "%Error: Command Failed $command\n";
+        if ($opt_quiet_exit) {
+            # Same return code as die
+            exit $! if $!;  # errno
+            exit $? >> 8 if $? >> 8;  # child exit status
+            exit 255;  # last resort
+        } else {
+            die "%Error: Command Failed $command\n";
+        }
     }
 }
 
@@ -226,7 +235,7 @@ Verilator - Convert Verilog code to C++/SystemC
     verilator --version
     verilator --cc [options] [source_files.v]... [opt_c_files.cpp/c/cc/a/o/so]
     verilator --sc [options] [source_files.v]... [opt_c_files.cpp/c/cc/a/o/so]
-    verilator --lint-only    [source_files.v]...
+    verilator --lint-only -Wall [source_files.v]...
 
 =head1 DESCRIPTION
 
@@ -289,6 +298,7 @@ detailed descriptions in L</"VERILATION ARGUMENTS"> for more information.
     --debugi-<srcfile> <level>  Enable debugging a source file at a level
     --default-language <lang>   Default language to parse
      +define+<var>=<value>      Set preprocessor define
+    --dpi-hdr-only              Only produce the DPI header file
     --dump-defines              Show preprocessor defines with -E
     --dump-tree                 Enable dumping .tree files
     --dump-treei <level>        Enable dumping .tree files at a level
@@ -346,9 +356,11 @@ detailed descriptions in L</"VERILATION ARGUMENTS"> for more information.
     --private                   Debugging; see docs
     --public                    Debugging; see docs
      -pvalue+<name>=<value>     Overwrite toplevel parameter
+    --quiet-exit                Don't print the command on failure
     --relative-includes         Resolve includes relative to current file
     --no-relative-cfuncs        Disallow 'this->' in generated functions
     --report-unoptflat          Extra diagnostics for UNOPTFLAT
+    --rr                        Run Verilator and record with rr
     --savable                   Enable model save-restore
     --sc                        Create SystemC output
     --stats                     Create statistics file
@@ -361,7 +373,7 @@ detailed descriptions in L</"VERILATION ARGUMENTS"> for more information.
     --top-module <topname>      Name of top level input module
     --trace                     Enable waveform creation
     --trace-fst                 Enable FST waveform creation
-    --trace-lxt2                Enable LXT2 waveform creation
+    --trace-fst-thread          Enable FST threaded waveform creation
     --trace-depth <levels>      Depth of tracing
     --trace-max-array <depth>   Maximum bit width for tracing
     --trace-max-width <width>   Maximum array depth for tracing
@@ -388,6 +400,7 @@ detailed descriptions in L</"VERILATION ARGUMENTS"> for more information.
     --x-assign <mode>           Assign non-initial Xs to this value
     --x-initial <mode>          Assign initial Xs to this value
     --x-initial-edge            Enable initial X->0 and X->1 edge triggers
+    --xml-only                  Create XML parser output
      -y <dir>                   Directory to search for modules
 
 This is a short summary of the arguments to run-time Verilated arguments.
@@ -399,7 +412,8 @@ detailed descriptions in L</"RUNTIME ARGUMENTS"> for more information.
      +verilator+prof+threads+file+I<filename>  Set profile filename
      +verilator+prof+threads+start+I<value>    Set profile starting point
      +verilator+prof+threads+window+I<value>   Set profile duration
-     +verilator+rand+reset+<value>     Set random reset technique
+     +verilator+rand+reset+I<value>    Set random reset technique
+     +verilator+seed+I<value>          Set random seed
      +verilator+V                      Verbose version and config
      +verilator+version                Show version and exit
 
@@ -416,19 +430,27 @@ Specifies the Verilog file containing the top module to be Verilated.
 
 =item {file.c/.cc/.cpp/.cxx}
 
-Specifies optional C++ files to be linked in with the Verilog code.  If any
-C++ files are specified in this way, Verilator will include a make rule
-that generates a I<module> executable.  Without any C++ files, Verilator
-will stop at the I<module>__ALL.a library, and presume you'll continue
-linking with make rules you write yourself.  See also the -CFLAGS option.
+Specifies optional C++ files to be linked in with the Verilog code.  The
+file path should either be absolute, or relative to where the make will be
+executed from, or add to your makefile's VPATH the appropriate directory to
+find the file.
+
+If any C++ files are specified in this way, Verilator will include a make
+rule that generates a I<module> executable.  Without any C++ files,
+Verilator will stop at the I<module>__ALL.a library, and presume you'll
+continue linking with make rules you write yourself.  See also the -CFLAGS
+option.
 
 =item {file.a/.o/.so}
 
 Specifies optional object or library files to be linked in with the Verilog
-code, as a shorthand for -LDFLAGS "<file>".  If any files are specified in
-this way, Verilator will include a make rule that uses these files when
-linking the I<module> executable.  This generally is only useful when used
-with the --exe option.
+code, as a shorthand for -LDFLAGS "<file>". The file path should either be
+absolute, or relative to where the make will be executed from, or add to
+your makefile's VPATH the appropriate directory to find the file.
+
+If any files are specified in this way, Verilator will include a make rule
+that uses these files when linking the I<module> executable.  This
+generally is only useful when used with the --exe option.
 
 =item +1364-1995ext+I<ext>
 
@@ -720,6 +742,11 @@ Defines the given preprocessor symbol, or multiple symbols if separated by
 plusses.  Similar to -D; +define is fairly standard across Verilog tools
 while -D is an alias for GCC compatibility.
 
+=item --dpi-hdr-only
+
+Only generate the DPI header file.  This option has no effect on the name
+or location of the file.
+
 =item --dump-defines
 
 With -E, suppress normal output, and instead print a list of all defines
@@ -755,8 +782,8 @@ will also go to standard out.
 
 =item --error-limit I<value>
 
-After this number of errors or warnings are encountered, exit.  Defaults to
-50.
+After this number of errors are encountered, exit.  Warnings are not
+counted in this limit.  Defaults to 50.
 
 =item --exe
 
@@ -871,7 +898,7 @@ change the SystemC modules instantiated.
 Tune the inlining of modules.  The default value of 2000 specifies that up
 to 2000 new operations may be added to the model by inlining, if more than
 this number of operations would result, the module is not inlined.  Larger
-values, or a value <= 1 will inline everything, will lead to longer compile
+values, or a value < 1 will inline everything, will lead to longer compile
 times, but potentially faster runtimes.  This setting is ignored for very
 small modules; they will always be inlined, if allowed.
 
@@ -1014,15 +1041,15 @@ developers.
 
 =item --output-split I<bytes>
 
-Enables splitting the output .cpp files into multiple outputs.  When a
-C++ file exceeds the specified number of operations, a new file will be
-created at the next function boundary.  In addition, any slow routines will
-be placed into __Slow files.  This accelerates compilation by as
-optimization can be disabled on the slow routines, and the remaining files
-can be compiled on parallel machines.  Using --output-split should have
-only a trivial impact on performance.  With GCC 3.3 on a 2GHz Opteron,
---output-split 20000 will result in splitting into approximately
-one-minute-compile chunks.
+Enables splitting the output .cpp files into multiple outputs.  When a C++
+file exceeds the specified number of operations, a new file will be created
+at the next function boundary.  In addition, any infrequently executed
+"cold" routines will be placed into __Slow files.  This accelerates
+compilation by as optimization can be disabled on the routines in __Slow,
+and the remaining files can be compiled on parallel machines.  Using
+--output-split should have only a trivial impact on performance.  With GCC
+3.3 on a 2GHz Opteron, --output-split 20000 will result in splitting into
+approximately one-minute-compile chunks.
 
 =item --output-split-cfuncs I<statements>
 
@@ -1147,6 +1174,10 @@ inlining.  This will also turn off inlining as if all modules had a
 Overwrites the given parameter(s) of the toplevel module. See -G for a
 detailed description.
 
+=item --quiet-exit
+
+When exiting due to an error, do not display the "Command Failed" message.
+
 =item --relative-includes
 
 When a file references an include file, resolve the filename relative to
@@ -1174,6 +1205,10 @@ printing. For example:
 will generate a PDF Vt_unoptflat_simple_2_35_unoptflat.dot.pdf from the DOT
 file.
 
+=item --rr
+
+Run Verilator and record with rr.  See: rr-project.org.
+
 =item --savable
 
 Enable including save and restore functions in the generated model.
@@ -1263,12 +1298,12 @@ good value.
 When the input Verilog contains more than one top level module, specifies
 the name of the top level Verilog module to become the top, and sets the
 default for if --prefix is not used.  This is not needed with standard
-designs with only one top.
+designs with only one top.  See also the MULTITOP warning section.
 
 =item --trace
 
 Adds waveform tracing code to the model using VCD format. This overrides
-C<--trace-fst> and C<--trace-lxt2>.
+C<--trace-fst>.
 
 Verilator will generate additional {prefix}__Trace*.cpp files that will
 need to be compiled.  In addition verilated_vcd_sc.cpp (for SystemC traces)
@@ -1282,13 +1317,14 @@ even when waveforms are not turned on during model execution.
 
 =item --trace-fst
 
-Enable FST waveform tracing in the model. This overrides C<--trace> and C<--trace-lxt2>.
+Enable FST waveform tracing in the model. This overrides C<--trace> and
+C<--trace-fst-thread>.  See also C<--trace-fst-thread>.
 
-=item --trace-lxt2
+=item --trace-fst-thread
 
-Enable LXT2 waveform tracing in the model. This overrides C<--trace> and
-C<--trace-fst>.  This option is deprecated in favor of FST traces and may
-be removed in the near future.
+Enable FST waveform tracing in the model, using a separate thread. This is
+typically faster in runtime but slower in total computes than
+C<--trace-fst>.  This overrides C<--trace> and C<--trace-fst>.
 
 =item --trace-depth I<levels>
 
@@ -1413,8 +1449,8 @@ received from third parties.
 
 Disable all code style related warning messages (note by default they are
 already disabled).  This is equivalent to "-Wno-DECLFILENAME -Wno-DEFPARAM
--Wno-INCABSPATH -Wno-PINCONNECTEMPTY -Wno-PINNOCONNECT -Wno-SYNCASYNCNET
--Wno-UNDRIVEN -Wno-UNUSED -Wno-VARHIDDEN".
+-Wno-IMPORTSTAR -Wno-INCABSPATH -Wno-PINCONNECTEMPTY -Wno-PINNOCONNECT
+-Wno-SYNCASYNCNET -Wno-UNDRIVEN -Wno-UNUSED -Wno-VARHIDDEN".
 
 =item -Wno-fatal
 
@@ -1453,10 +1489,10 @@ Enable all code style related warning messages.  This is equivalent to
 =item --x-assign unique
 
 Controls the two-state value that is replaced when an assignment to X is
-encountered.  --x-assign=fast, the default, converts all Xs to whatever is
-best for performance.  --x-assign=0 converts all Xs to 0s, and is also fast.
---x-assign=1 converts all Xs to 1s, this is nearly as fast as 0, but more
-likely to find reset bugs as active high logic will fire.  --x-assign=unique
+encountered. C<--x-assign fast>, the default, converts all Xs to whatever is
+best for performance.  C<--x-assign 0> converts all Xs to 0s, and is also fast.
+C<--x-assign 1> converts all Xs to 1s, this is nearly as fast as 0, but more
+likely to find reset bugs as active high logic will fire.  C<--x-assign unique>
 will call a function to determine the value, this allows randomization of
 all Xs to find reset bugs and is the slowest, but safest for finding reset
 bugs in code.
@@ -1481,13 +1517,13 @@ variables are controlled with --x-initial.
 Controls the two-state value that is used to initialize variables that are
 not otherwise initialized.
 
---x-initial=0, initializes all otherwise uninitialized variables to zero.
+C<--x-initial 0>, initializes all otherwise uninitialized variables to zero.
 
---x-initial=unique, the default, initializes variables using a function,
+C<--x-initial unique>, the default, initializes variables using a function,
 which determines the value to use each initialization. This gives greatest
 flexibility and allows finding reset bugs.  See L</"Unknown states">.
 
---x-initial=fast, is best for performance, and initializes all variables to
+C<--x-initial fast>, is best for performance, and initializes all variables to
 a state Verilator determines is optimal.  This may allow further code
 optimizations, but will likely hide any code bugs relating to missing
 resets.
@@ -1522,7 +1558,15 @@ ensure that X E<rarr> 1 triggers a C<posedge>.
 B<Note.> Some users have reported that using this option can affect
 convergence, and that it may be necessary to use --converge-limit to
 increase the number of convergence iterations. This may be another
-indication of problems with the modelled design that should be addressed.
+indication of problems with the modeled design that should be addressed.
+
+=item --xml-only
+
+Create XML output only, do not create any other output.
+
+The XML format is intended to be used to leverage Verilator's parser and
+elaboration to feed to other downstream tools. Be aware that the XML format
+is still evolving; there will be some changes in future versions.
 
 =item -y I<dir>
 
@@ -1585,10 +1629,15 @@ posedge eval() and one negedge eval().
 
 =item +verilator+rand+reset+I<value>
 
-When a model was Verilated using "-x-inital unique", sets the
+When a model was Verilated using "-x-initial unique", sets the
 initialization technique.  0 = Reset to zeros. 1 = Reset to all-ones.  2 =
 Randomize.  See L</"Unknown states">.
 
+=item +verilator+seed+I<value>
+
+For $random and "-x-initial unique", set the random seed value.  If zero or
+not specified picks a value from the system random number generator.
+
 =item +verilator+V
 
 Shows the verbose version, including configuration information.
@@ -1688,7 +1737,7 @@ This is an example similar to the above, but using SystemC.
       #include "Vour.h"
       int sc_main(int argc, char **argv) {
           Verilated::commandArgs(argc, argv);
-          sc_clock clk ("clk",10, 0.5, 3, true);
+          sc_clock clk ("clk", 10, 0.5, 3, true);
           Vour* top;
           top = new Vour("top");
           top->clk(clk);
@@ -1749,8 +1798,8 @@ the examples directory in the distribution.
 =head1 BENCHMARKING & OPTIMIZATION
 
 For best performance, run Verilator with the "-O3 --x-assign=fast
---x-initial=fast --noassert" flags.  The -O3 flag will require longer
-compile times, and --x-assign=fast --x-initial=fast may increase the risk
+--x-initial fast --noassert" flags.  The -O3 flag will require longer
+compile times, and "--x-assign fast --x-initial fast" may increase the risk
 of reset bugs in trade for performance; see the above documentation for
 these flags.
 
@@ -1833,7 +1882,7 @@ For -cc and -sc mode, it also creates:
 
     {prefix}.cpp                        // Top level C++ file
     {prefix}.h                          // Top level header
-    {prefix}__Slow{__n}.cpp             // Constructors and infrequent routines
+    {prefix}__Slow{__n}.cpp             // Constructors and infrequent cold routines
     {prefix}{__n}.cpp                   // Additional top C++ files (--output-split)
     {prefix}{each_verilog_module}.cpp   // Lower level internal C++ files
     {prefix}{each_verilog_module}.h     // Lower level internal header files
@@ -2058,7 +2107,7 @@ command line, or the link), you'd then:
 
     #include "svdpi.h"
     #include "Vour__Dpi.h"
-    int add (int a, int b) { return a+b; }
+    int add(int a, int b) { return a+b; }
 
 =head2 DPI System Task/Functions
 
@@ -2108,7 +2157,7 @@ respect to that top level module, then the scope could be set with
 
     #include "svdpi.h"
     ...
-    svSetScope (svGetScopeFromName ("dut"));
+    svSetScope(svGetScopeFromName("dut"));
 
 (Remember that Verilator adds a "V" to the top of the module hierarchy.)
 
@@ -2122,7 +2171,7 @@ comments within the svdpi.h header for more information.
 Verilator allows writing $display like functions using this syntax:
 
    import "DPI-C" function void
-         \$my_display (input string formatted /*verilator sformat*/ );
+         \$my_display(input string formatted /*verilator sformat*/ );
 
 The /*verilator sformat*/ indicates that this function accepts a $display
 like format specifier followed by any number of arguments to satisfy the
@@ -2230,7 +2279,7 @@ accesses the above signal "readme" would be:
       #include "verilated_vpi.h"  // Required to get definitions
 
       vluint64_t main_time = 0;   // See comments in first example
-      double sc_time_stamp () { return main_time; }
+      double sc_time_stamp() { return main_time; }
 
       void read_and_check() {
           vpiHandle vh1 = vpi_handle_by_name((PLI_BYTE8*)"TOP.our.readme", NULL);
@@ -2329,9 +2378,12 @@ provides one of those threads, and the generated model will create and
 manage the other N-1 threads. It's the client's responsibility not to
 oversubscribe the available CPU cores. Under CPU oversubscription, the
 Verilated model should not livelock nor deadlock, however, you can expect
-performance to be far worse than it would be with proper stoichiometry of
+performance to be far worse than it would be with proper ratio of
 threads and CPU cores.
 
+With --trace-fst-thread, tracing occurs in a separate thread from the main
+simulation thread(s). This option is orthogonal to --threads.
+
 The remainder of this section describe behavior with --threads 1 or
 --threads N (not --no-threads).
 
@@ -2377,7 +2429,7 @@ completing after the $stop or $finish.
 If using --coverage, the coverage routines are fully thread safe.
 
 If using --dpi, Verilator assumes pure DPI imports are thread safe,
-balancing performance versus saftey. See --threads-dpi.
+balancing performance versus safety. See --threads-dpi.
 
 If using --savable, the save/restore classes are not multithreaded and are
 must be called only by the eval thread.
@@ -2410,6 +2462,10 @@ Configuration files are parsed after the normal Verilog preprocessing, so
 `ifdefs, `defines, and comments may be used as if it were normal Verilog
 code.
 
+Note that file or line-specific configuration only applies to files read
+after the configuration file. It is therefore recommended to pass the
+configuration file to Verilator as first file.
+
 The grammar of configuration commands is as follows:
 
 =over 4
@@ -2882,7 +2938,7 @@ clock pins to be sc_clocks and this is no longer needed.
 
 Used after a port declaration.  It sets the port to be of sc_bv<I<width>>
 type, instead of bool, vluint32_t or vluint64_t.  This may be useful if
-the port width is parametrized and different of such modules interface
+the port width is parameterized and different of such modules interface
 a templated module (such as a transactor) or for other reasons.  In general
 you should avoid using this attribute when not necessary as with increasing
 usage of sc_bv the performance increases significantly.
@@ -3008,9 +3064,10 @@ from a four state simulator.  An === comparison to X will always be false,
 so that Verilog code which checks for uninitialized logic will not fire.
 
 Assigning a variable to a X will actually assign the variable to a random
-value (see the --x-assign switch.)  Thus if the value is actually used, the
-random value should cause downstream errors.  Integers also randomize, even
-though the Verilog 2001 specification says they initialize to zero.
+value (see the --x-assign switch and +verilator+rand+reset runtime switch.)
+Thus if the value is actually used, the random value should cause
+downstream errors.  Integers also randomize, even though the Verilog 2001
+specification says they initialize to zero.
 
 All variables, depending on --x-initial setting, are typically randomly
 initialized using a function.  By running several random simulation runs
@@ -3272,7 +3329,7 @@ $value$plusargs.
 
 Not supported as Verilator needs to determine all formatting at compile
 time.  Generally you can just ifdef them out for no ill effect.  Note also
-VL_TIME_MULTIPLER can be defined at compile time to move the decimal point
+VL_TIME_MULTIPLIER can be defined at compile time to move the decimal point
 when displaying all times, model wide.
 
 =back
@@ -3388,7 +3445,7 @@ it's a bit slower than a non-delayed assignment.)  Here's an example
         always @ (posedge clk)
             if (~reset_l) begin
                 for (i=0; i<`ARRAY_SIZE; i++) begin
-                    array[i] = 0;        // Non-delayed for verilator
+                    array[i] = 0;  // Non-delayed for verilator
                 end
 
 This message is only seen on large or complicated loops because Verilator
@@ -3446,15 +3503,6 @@ instead intended is to use a casez with C<?>.
 Ignoring this warning will only suppress the lint check, it will simulate
 correctly.
 
-=item COLONPLUS
-
-Warns that a :+ is seen. Likely the intent was to use +: to select a range
-of bits. If the intent was a range that is explicitly positive, suggest
-adding a space, e.g. use ": +".
-
-Ignoring this warning will only suppress the lint check, it will simulate
-correctly.
-
 =item CDCRSTLOGIC
 
 With --cdc only, warns that asynchronous flop reset terms come from other
@@ -3479,6 +3527,15 @@ For example "X > 1" will always be true when X is a single bit wide.
 Ignoring this warning will only suppress the lint check, it will simulate
 correctly.
 
+=item COLONPLUS
+
+Warns that a :+ is seen. Likely the intent was to use +: to select a range
+of bits. If the intent was a range that is explicitly positive, suggest
+adding a space, e.g. use ": +".
+
+Ignoring this warning will only suppress the lint check, it will simulate
+correctly.
+
 =item COMBDLY
 
 Warns that you have a delayed assignment inside of a combinatorial block.
@@ -3491,6 +3548,18 @@ L<http://www.sunburst-design.com/papers/CummingsSNUG2000SJ_NBA_rev1_2.pdf>
 Ignoring this warning may make Verilator simulations differ from other
 simulators.
 
+=item CONTASSREG
+
+Error that a continuous assignment is setting a reg. According to IEEE
+Verilog, but not SystemVerilog, a wire must be used as the target of
+continuous assignments.
+
+This error is only reported when "--language 1364-1995", "--language
+1364-2001", or "--language 1364-2005" is used.
+
+Ignoring this error will only suppress the lint check, it will simulate
+correctly.
+
 =item DECLFILENAME
 
 Warns that a module or other declaration's name doesn't match the filename
@@ -3551,6 +3620,19 @@ code to a case statement, or a SystemVerilog 'unique if' or 'priority if'.
 Disabled by default as this is a code style warning; it will simulate
 correctly.
 
+=item IGNOREDRETURN
+
+Warns that a non-void function is being called as a task, and hence the
+return value is being ignored.
+
+This warning is required by IEEE. The portable way to suppress this warning
+(in SystemVerilog) is to use a void cast, e.g.
+
+    void'(function_being_called_as_task());
+
+Ignoring this warning will only suppress the lint check, it will simulate
+correctly.
+
 =item IMPERFECTSCH
 
 Warns that the scheduling of the model is not absolutely perfect, and some
@@ -3570,6 +3652,16 @@ Emacs, available from L<http://www.veripool.org/>
 Ignoring this warning will only suppress the lint check, it will simulate
 correctly.
 
+=item IMPORTSTAR
+
+Warns that an "import I<package>::*" statement is in $unit scope. This
+causes the imported symbols to polute the global namespace, defeating much
+of the purpose of having a package. Generally "import ::*" should only be
+used inside a lower scope such as a package or module.
+
+Disabled by default as this is a code style warning; it will simulate
+correctly.
+
 =item IMPURE
 
 Warns that a task or function that has been marked with /*verilator
@@ -3648,14 +3740,31 @@ correctly.
 
 =item MULTITOP
 
-Error that there are multiple top level modules, that is modules not
-instantiated by any other module.  Verilator only supports a single top
-level, if you need more, create a module that wraps all of the top modules.
+Warns that there are multiple top level modules, that is modules not
+instantiated by any other module, and both modules were put on the command
+line (not in a library). Three likely cases:
 
-Often this error is because some low level cell is being read in, but is
-not really needed.  The best solution is to insure that each module is in a
-unique file by the same name.  Otherwise, make sure all library files are
-read in as libraries with -v, instead of automatically with -y.
+1. A single module is intended to be the top. This warning then occurs
+because some low level cell is being read in, but is not really needed as
+part of the design.  The best solution for this situation is to ensure that
+only the top module is put on the command line without any flags, and all
+remaining library files are read in as libraries with -v, or are
+automatically resolved by having filenames that match the module names.
+
+2. A single module is intended to be the top, the name of it is known, and
+all other modules should be ignored if not part of the design.  The best
+solution is to use the --top-module option to specify the top module's
+name. All other modules that are not part of the design will be for the
+most part ignored (they must be clean in syntax and their contents will be
+removed as part of the Verilog module elaboration process.)
+
+3. Multiple modules are intended to be design tops, e.g. when linting a
+library file.  As multiple modules are desired, disable the MULTITOP
+warning.  All input/outputs will go uniquely to each module, with any
+conflicting and identical signal names being uniquified by adding a prefix
+based on the top module name followed by __02E (a Verilator-encoded ASCII
+".').  This renaming is done even if the two modules' signals seem
+identical, e.g. multiple modules with a "clk" input.
 
 =item PINCONNECTEMPTY
 
@@ -3684,6 +3793,11 @@ signal.
 Disabled by default as this is a code style warning; it will simulate
 correctly.
 
+=item PROCASSWIRE
+
+Error that a procedural assignment is setting a wire. According to IEEE, a
+var/reg must be used as the target of procedural assignments.
+
 =item REALCVT
 
 Warns that a real number is being implicitly rounded to an integer, with
@@ -3760,7 +3874,7 @@ expression as the next statement.  For example:
 
       task foo; output sig; ... endtask
       always @* begin
-           foo(bus_we_select_from[2]);   // Will get TASKNSVAR error
+           foo(bus_we_select_from[2]);  // Will get TASKNSVAR error
       end
 
 Change this to:
@@ -3826,7 +3940,7 @@ Often UNOPTFLAT is caused by logic that isn't truly circular as viewed by
 synthesis which analyzes interconnection per-bit, but is circular to
 simulation which analyzes per-bus:
 
-      wire [2:0] x = {x[1:0],shift_in};
+      wire [2:0] x = {x[1:0], shift_in};
 
 This statement needs to be evaluated multiple times, as a change in
 "shift_in" requires "x" to be computed 3 times before it becomes stable.
@@ -3835,12 +3949,12 @@ causes the warning.
 
 For significantly better performance, split this into 2 separate signals:
 
-      wire [2:0] xout = {x[1:0],shift_in};
+      wire [2:0] xout = {x[1:0], shift_in};
 
 and change all receiving logic to instead receive "xout".  Alternatively,
 change it to
 
-      wire [2:0] x = {xin[1:0],shift_in};
+      wire [2:0] x = {xin[1:0], shift_in};
 
 and change all driving logic to instead drive "xin".
 
@@ -3956,7 +4070,7 @@ Concatenate leading zeros when doing arithmetic.  In the statement
 
 The best fix, which clarifies intent and will also make all tools happy is:
 
-        wire [5:0] plus_one = from[5:0] + 6'd1 + {5'd0,carry[0]};
+        wire [5:0] plus_one = from[5:0] + 6'd1 + {5'd0, carry[0]};
 
 Ignoring this warning will only suppress the lint check, it will simulate
 correctly.
@@ -3968,12 +4082,12 @@ has an indeterminate width.  In most cases this violates the Verilog rule
 that widths inside concatenates and replicates must be sized, and should be
 fixed in the code.
 
-    wire [63:0] concat = {1,2};
+    wire [63:0] concat = {1, 2};
 
 An example where this is technically legal (though still bad form) is:
 
     parameter PAR = 1;
-    wire [63:0] concat = {PAR,PAR};
+    wire [63:0] concat = {PAR, PAR};
 
 The correct fix is to either size the 1 ("32'h1"), or add the width to the
 parameter definition ("parameter [31:0]"), or add the width to the
@@ -4128,12 +4242,12 @@ trace file if you want all data to land in the same output file.
         ...
         Verilated::traceEverOn(true);
         VerilatedVcdC* tfp = new VerilatedVcdC;
-        topp->trace (tfp, 99);
-        tfp->open ("obj_dir/t_trace_ena_cc/simx.vcd");
+        topp->trace(tfp, 99);  // Trace 99 levels of hierarchy
+        tfp->open("obj_dir/t_trace_ena_cc/simx.vcd");
         ...
         while (sc_time_stamp() < sim_time && !Verilated::gotFinish()) {
             main_time += #;
-            tfp->dump (main_time);
+            tfp->dump(main_time);
         }
         tfp->close();
     }
@@ -4164,8 +4278,8 @@ trace file if you want all data to land in the same output file.
         ...
         Verilated::traceEverOn(true);
         VerilatedVcdSc* tfp = new VerilatedVcdSc;
-        topp->trace (tfp, 99);
-        tfp->open ("obj_dir/t_trace_ena_cc/simx.vcd");
+        topp->trace(tfp, 99);  // Trace 99 levels of hierarchy
+        tfp->open("obj_dir/t_trace_ena_cc/simx.vcd");
         ...
         sc_start(1);
         ...
@@ -4176,7 +4290,8 @@ trace file if you want all data to land in the same output file.
 
 FST a format by GTKWave.
 This version provides a basic FST support.
-To dump FST format, add the --trace switch to Verilator and change the include path in the testbench to:
+To dump FST format, add the --trace-fst switch to Verilator and change the include
+path in the testbench to:
 
     #include "verilated_fst_c.h"
     VerilatedFstC* tfp = new VerilatedFstC;
@@ -4189,29 +4304,12 @@ but such requirement could be rare.
 The FST library from GTKWave does not currently support SystemC; use VCD
 format instead.
 
-=item How do I generate LXT2 waveforms (traces) in C++?
-
-LXT2 a format by GTKWave, which is usually 10x smaller than VCD format.
-This version provides a basic LXT2 support.
-To dump LXT2 format, add the --trace switch to Verilator and change the include path in the testbench to:
-
-    #include "verilated_lxt2_c.h"
-    VerilatedLxt2C* tfp = new VerilatedLxt2C;
-
-Note that currently supporting both LXT2 and VCD in a single simulation is impossible,
-but such requirement could be rare.
-
-=item How do I generate LXT2 waveforms (traces) in SystemC?
-
-The LXT2 library from GTKWave does not currently support SystemC; use VCD
-format instead.
-
 =item How do I view waveforms (traces)?
 
-Verilator makes standard VCD (Value Change Dump), LXT2 and FST files.  VCD files are viewable
+Verilator makes standard VCD (Value Change Dump) and FST files.  VCD files are viewable
 with the public domain GTKWave (recommended) or Dinotrace (legacy)
 programs, or any of the many commercial offerings;
-LXT2 and FST are supported by GTKWave only.
+FST is supported by GTKWave only.
 
 =item How do I reduce the size of large waveform (trace) files?
 
@@ -4575,7 +4673,7 @@ remain anonymous.
 
 The latest version is available from L<http://www.veripool.org/>.
 
-Copyright 2003-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2003-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify the Verilator internals under the terms of
 either the GNU Lesser General Public License Version 3 or the Perl Artistic
 License Version 2.0.

bin/verilator_coverage

@@ -3,7 +3,7 @@ eval 'exec perl -wS $0 ${1+"$@"}'
   if 0;
 ######################################################################
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -17,13 +17,6 @@ eval 'exec perl -wS $0 ${1+"$@"}'
 
 require 5.006_001;
 use warnings;
-BEGIN {
-    if ($ENV{DIRPROJECT} && $ENV{DIRPROJECT_PERL_BOOT}) {
-	# Magic to allow author testing of perl packages in local directory
-	require $ENV{DIRPROJECT}."/".$ENV{DIRPROJECT_PERL_BOOT};
-    }
-}
-
 use Getopt::Long;
 use FindBin qw($RealBin $RealScript);
 use IO::File;
@@ -31,7 +24,7 @@ use Pod::Usage;
 use Cwd qw(abs_path getcwd);
 
 use strict;
-use vars qw ($Debug @Opt_Verilator_Sw);
+use vars qw($Debug @Opt_Verilator_Sw);
 
 #######################################################################
 #######################################################################
@@ -54,21 +47,21 @@ foreach my $sw (@ARGV) {
     push @Opt_Verilator_Sw, $sw;
 }
 
-Getopt::Long::config ("no_auto_abbrev","pass_through");
+Getopt::Long::config("no_auto_abbrev","pass_through");
 if (! GetOptions (
-	  # Major operating modes
-	  "help"	=> \&usage,
-	  "debug:s"	=> \&debug,
-	  # "version!"	=> \&version,	# Also passthru'ed
-	  # Additional parameters
-	  "<>"		=> sub {},	# Ignored
+          # Major operating modes
+          "help"        => \&usage,
+          "debug:s"     => \&debug,
+          # "version!"  => \&version,   # Also passthru'ed
+          # Additional parameters
+          "<>"          => sub {},      # Ignored
     )) {
     pod2usage(-exitstatus=>2, -verbose=>0);
 }
 
 # Normal, non gdb
-run (verilator_coverage_bin()
-     ." ".join(' ',@Opt_Verilator_Sw));
+run(verilator_coverage_bin()
+    ." ".join(' ',@Opt_Verilator_Sw));
 
 #----------------------------------------------------------------------
 
@@ -90,25 +83,25 @@ sub verilator_coverage_bin {
     my $bin = "";
     # Use VERILATOR_ROOT if defined, else assume verilator_bin is in the search path
     my $basename = ($ENV{VERILATOR_COVERAGE_BIN}
-		    || "verilator_coverage_bin_dbg");
+                    || "verilator_coverage_bin_dbg");
     if (defined($ENV{VERILATOR_ROOT})) {
-	my $dir = $ENV{VERILATOR_ROOT};
+        my $dir = $ENV{VERILATOR_ROOT};
         if (-x "$dir/bin/$basename"
             || -x "$dir/bin/$basename.exe") {  # From a "make install" into VERILATOR_ROOT
-	    $bin = "$dir/bin/$basename";
-	} else {
-	    $bin = "$dir/$basename";  # From pointing to kit directory
-	}
+            $bin = "$dir/bin/$basename";
+        } else {
+            $bin = "$dir/$basename";  # From pointing to kit directory
+        }
     } else {
         if (-x "$RealBin/$basename"
             || -x "$RealBin/$basename.exe") {
-	    $bin = "$RealBin/$basename";  # From path/to/verilator with verilator_bin installed
-	} else {
-	    $bin = $basename;  # Find in PATH
-	}
-	# Note we don't look under bin/$basename which would be right if running
-	# in the kit dir. Running that would likely break, since
-	# VERILATOR_ROOT wouldn't be set and Verilator won't find internal files.
+            $bin = "$RealBin/$basename";  # From path/to/verilator with verilator_bin installed
+        } else {
+            $bin = $basename;  # Find in PATH
+        }
+        # Note we don't look under bin/$basename which would be right if running
+        # in the kit dir. Running that would likely break, since
+        # VERILATOR_ROOT wouldn't be set and Verilator won't find internal files.
     }
     return $bin;
 }
@@ -125,23 +118,23 @@ sub run {
     system($command);
     my $status = $?;
     if ($status) {
-	if ($! =~ /no such file or directory/i) {
-	    warn "%Error: verilator_coverage: Misinstalled, or VERILATOR_ROOT might need to be in environment\n";
-	}
-	if ($Debug) {  # For easy rerunning
-	    warn "%Error: export VERILATOR_ROOT=".($ENV{VERILATOR_ROOT}||"")."\n";
-	    warn "%Error: $command\n";
-	}
-	if ($status & 127) {
-	    if (($status & 127) == 8 || ($status & 127) == 11) { # SIGFPA or SIGSEGV
-		warn "%Error: Verilator_coverage internal fault, sorry.\n" if !$Debug;
-	    } elsif (($status & 127) == 6) {  # SIGABRT
-		warn "%Error: Verilator_coverage aborted.\n" if !$Debug;
-	    } else {
-		warn "%Error: Verilator_coverage threw signal $status.\n" if !$Debug;
-	    }
-	}
-	die "%Error: Command Failed $command\n";
+        if ($! =~ /no such file or directory/i) {
+            warn "%Error: verilator_coverage: Misinstalled, or VERILATOR_ROOT might need to be in environment\n";
+        }
+        if ($Debug) {  # For easy rerunning
+            warn "%Error: export VERILATOR_ROOT=".($ENV{VERILATOR_ROOT}||"")."\n";
+            warn "%Error: $command\n";
+        }
+        if ($status & 127) {
+            if (($status & 127) == 8 || ($status & 127) == 11) { # SIGFPA or SIGSEGV
+                warn "%Error: Verilator_coverage internal fault, sorry.\n" if !$Debug;
+            } elsif (($status & 127) == 6) {  # SIGABRT
+                warn "%Error: Verilator_coverage aborted.\n" if !$Debug;
+            } else {
+                warn "%Error: Verilator_coverage threw signal $status.\n" if !$Debug;
+            }
+        }
+        die "%Error: Command Failed $command\n";
     }
 }
 
@@ -273,7 +266,7 @@ Specifies a module search directory.
 
 The latest version is available from L<http://www.veripool.org/>.
 
-Copyright 2003-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2003-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify the Verilator internals under the terms of
 either the GNU Lesser General Public License Version 3 or the Perl Artistic
 License Version 2.0.

bin/verilator_difftree

@@ -10,7 +10,7 @@ use Getopt::Long;
 use IO::File;
 use Pod::Usage;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 
@@ -37,12 +37,12 @@ my $Opt_B;
 my $Opt_Lineno = 1;
 autoflush STDOUT 1;
 autoflush STDERR 1;
-Getopt::Long::config ("no_auto_abbrev");
-if (! GetOptions (
-	  "help"	=> \&usage,
-	  "debug"	=> \&debug,
-	  "<>"		=> \&parameter,
-	  "lineno!"	=> \$Opt_Lineno,
+Getopt::Long::config("no_auto_abbrev");
+if (! GetOptions(
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          "<>"          => \&parameter,
+          "lineno!"     => \$Opt_Lineno,
     )) {
     die "%Error: Bad usage, try 'verilator_difftree --help'\n";
 }
@@ -54,9 +54,9 @@ defined $Opt_B or die "%Error: No new diff filename\n";
 -e $Opt_B or die "%Error: No new diff filename found: $Opt_B\n";
 
 if (-d $Opt_A && -d $Opt_B) {
-    diff_dir ($Opt_A, $Opt_B);
+    diff_dir($Opt_A, $Opt_B);
 } elsif (-f $Opt_A && -f $Opt_B) {
-    diff_file ($Opt_A, $Opt_B);
+    diff_file($Opt_A, $Opt_B);
 } else {
     die "%Error: Mix of files and dirs\n";
 }
@@ -68,25 +68,25 @@ sub diff_dir {
     my %files;
 
     foreach my $fn (glob("$a/*.tree")) {
-	(my $base = $fn) =~ s!.*/!!;
-	$files{$base}{a} = $fn;
+        (my $base = $fn) =~ s!.*/!!;
+        $files{$base}{a} = $fn;
     }
     foreach my $fn (glob("$b/*.tree")) {
-	(my $base = $fn) =~ s!.*/!!;
-	$files{$base}{b} = $fn;
+        (my $base = $fn) =~ s!.*/!!;
+        $files{$base}{b} = $fn;
     }
     my $any;
     foreach my $base (sort (keys %files)) {
-	my $a = $files{$base}{a};
-	my $b = $files{$base}{b};
-	next if !$a || !$b;
-	print "="x70,"\n";
-	print "= $a <-> $b\n";
-	diff_file($a,$b);
-	$any = 1;
+        my $a = $files{$base}{a};
+        my $b = $files{$base}{b};
+        next if !$a || !$b;
+        print "="x70,"\n";
+        print "= $a <-> $b\n";
+        diff_file($a,$b);
+        $any = 1;
     }
-    $any or warn ("%Warning: No .tree files found that have similar base names:\n    "
-                  .join("\n    ", sort keys %files),"\n");
+    $any or warn("%Warning: No .tree files found that have similar base names:\n    "
+                 .join("\n    ", sort keys %files),"\n");
 }
 
 sub diff_file {
@@ -101,10 +101,10 @@ sub diff_file {
     my $vera = version_from($a);
     my $verb = version_from($b);
     my $verCvt = (($vera < 0x3900 && $verb >= 0x3900)
-		  || ($vera >= 0x3900 && $verb < 0x3900));
+                  || ($vera >= 0x3900 && $verb < 0x3900));
 
-    filter ($a, $tmp_a, $verCvt);
-    filter ($b, $tmp_b, $verCvt);
+    filter($a, $tmp_a, $verCvt);
+    filter($b, $tmp_b, $verCvt);
     system("diff -u $tmp_a $tmp_b");
     unlink $tmp_a;
     unlink $tmp_b;
@@ -115,8 +115,8 @@ sub version_from {
     # Return dump format
     my $f1 = IO::File->new ($fn) or die "%Error: $! $fn,";
     while (defined (my $line=$f1->getline())) {
-	last if $. > 10;
-	return hex $1 if $line =~ /\(format (0x[0-9.]+)\)/;
+        last if $. > 10;
+        return hex $1 if $line =~ /\(format (0x[0-9.]+)\)/;
     }
     return 1.0;
 }
@@ -130,36 +130,36 @@ sub filter {
     my $f2 = IO::File->new ($fn2,"w") or die "%Error: $! $fn2,";
     while (defined (my $line=$f1->getline())) {
       same_line:
-	next if $line =~ / This=/;
-	$line =~ s/0x[a-f0-9]+/0x/g;
-	$line =~ s/<e[0-9]+\#?>/<e>/g;
-	$line =~ s/{[a-z]*\d+}/{}/g if !$Opt_Lineno;
-	if ($verCvt) {
-	    next if $line =~ /^     NETLIST/;
-	    $line =~ s!\@dt=0x\(G?/?([^)]+)\)!$1!g;  # NEW: @dt -> OLD: non @dt format
-	    #					     # Below Ver1_Non_Dtyped may replace above further
-	    if ($line =~ /: ([A-Z]+) /) {
-		my $type = $1;
-		next if $type =~ 'DTYPE';
-		if ($type eq 'TYPETABLE' || $type eq 'RANGE') {
-		    $line =~ /^(\s+\S+:) /; my $prefix = $1;
-		    while (defined ($line=$f1->getline())) {
-			next if $line =~ /^\s+[a-z]/;  # Table body
-			next if $line =~ /^${prefix}[0-9]:/;
-			goto same_line;
-		    }
-		    next;
-		}
-		if ($Ver1_Non_Dtyped{$type}) {
-		    $line =~ s! w[0-9]+!!g;
-		}
-	    }
-	    $line =~ s!\@dt=0$!NoW!g;   # NEW: dt=null -> common format
-	    $line =~ s!\@dt=0 !NoW !g;  # NEW: dt=null -> common format
-	    $line =~ s! s?w0$! NoW!g;   # OLD: no width -> common format
-	    $line =~ s! s?w0 ! NoW !g;  # OLD: no width -> common format
-	}
-	print $f2 $line;
+        next if $line =~ / This=/;
+        $line =~ s/0x[a-f0-9]+/0x/g;
+        $line =~ s/<e[0-9]+\#?>/<e>/g;
+        $line =~ s/{[a-z]*\d+}/{}/g if !$Opt_Lineno;
+        if ($verCvt) {
+            next if $line =~ /^     NETLIST/;
+            $line =~ s!\@dt=0x\(G?/?([^)]+)\)!$1!g;  # NEW: @dt -> OLD: non @dt format
+            #                                        # Below Ver1_Non_Dtyped may replace above further
+            if ($line =~ /: ([A-Z]+) /) {
+                my $type = $1;
+                next if $type =~ 'DTYPE';
+                if ($type eq 'TYPETABLE' || $type eq 'RANGE') {
+                    $line =~ /^(\s+\S+:) /; my $prefix = $1;
+                    while (defined ($line=$f1->getline())) {
+                        next if $line =~ /^\s+[a-z]/;  # Table body
+                        next if $line =~ /^${prefix}[0-9]:/;
+                        goto same_line;
+                    }
+                    next;
+                }
+                if ($Ver1_Non_Dtyped{$type}) {
+                    $line =~ s! w[0-9]+!!g;
+                }
+            }
+            $line =~ s!\@dt=0$!NoW!g;   # NEW: dt=null -> common format
+            $line =~ s!\@dt=0 !NoW !g;  # NEW: dt=null -> common format
+            $line =~ s! s?w0$! NoW!g;   # OLD: no width -> common format
+            $line =~ s! s?w0 ! NoW !g;  # OLD: no width -> common format
+        }
+        print $f2 $line;
     }
     $f1->close;
     $f2->close;
@@ -169,7 +169,7 @@ sub filter {
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub debug {
@@ -179,11 +179,11 @@ sub debug {
 sub parameter {
     my $param = shift;
     if (!defined $Opt_A) {
-	$Opt_A = $param;
+        $Opt_A = $param;
     } elsif (!defined $Opt_B) {
-	$Opt_B = $param;
+        $Opt_B = $param;
     } else {
-	die "%Error: Unknown parameter: $param\n";
+        die "%Error: Unknown parameter: $param\n";
     }
 }
 
@@ -236,7 +236,7 @@ Do not show differences in line numbering.
 
 The latest version is available from L<http://www.veripool.org/verilator>.
 
-Copyright 2005-2018 by Wilson Snyder.  This package is free software; you can
+Copyright 2005-2019 by Wilson Snyder.  This package is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

bin/verilator_gantt

@@ -9,7 +9,7 @@ use warnings;
 use Getopt::Long;
 use IO::File;
 use Pod::Usage;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 $Debug = 0;
 my $Opt_File;
@@ -44,7 +44,7 @@ exit(0);
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub parameter {
@@ -540,7 +540,7 @@ verilator_gantt.vcd.
 
 The latest version is available from L<http://www.veripool.org/>.
 
-Copyright 2018-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2018-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

bin/verilator_includer

@@ -3,7 +3,7 @@ eval 'exec perl -wS $0 ${1+"$@"}'
   if 0;
 # DESCRIPTION: Print include statements for each ARGV
 #
-# Copyright 2003-2018 by Wilson Snyder. This package is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This package is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU Lesser
 # General Public License Version 3 or the Perl Artistic License Version 2.0.
 ######################################################################

bin/verilator_profcfunc

@@ -11,7 +11,7 @@ use IO::File;
 use Pod::Usage;
 eval { use Data::Dumper;  $Data::Dumper::Indent = 1; }; # Debug, ok if missing
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 
@@ -23,12 +23,12 @@ $Debug = 0;
 my $Opt_File;
 autoflush STDOUT 1;
 autoflush STDERR 1;
-Getopt::Long::config ("no_auto_abbrev");
-if (! GetOptions (
-		  "help"	=> \&usage,
-		  "debug"	=> \&debug,
-		  "<>"		=> \&parameter,
-		  )) {
+Getopt::Long::config("no_auto_abbrev");
+if (! GetOptions(
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          "<>"          => \&parameter,
+    )) {
     die "%Error: Bad usage, try 'verilator_profcfunc --help'\n";
 }
 
@@ -40,7 +40,7 @@ profcfunc($Opt_File);
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub debug {
@@ -50,9 +50,9 @@ sub debug {
 sub parameter {
     my $param = shift;
     if (!defined $Opt_File) {
-	$Opt_File = $param;
+        $Opt_File = $param;
     } else {
-	die "%Error: Unknown parameter: $param\n";
+        die "%Error: Unknown parameter: $param\n";
     }
 }
 
@@ -66,13 +66,13 @@ sub profcfunc {
     my %funcs;
 
     while (defined (my $line=$fh->getline())) {
-	#                  %time      cumesec   selfsec     calls     {stuff}   name
-	if ($line =~ /^\s*([0-9.]+)\s+[0-9.]+\s+([0-9.]+)\s+([0-9.]+)\s+[^a-zA-Z_]*([a-zA-Z_].*)$/) {
-	    my $pct=$1; my $sec=$2; my $calls=$3; my $func=$4;
-	    $funcs{$func}{pct} += $pct;
-	    $funcs{$func}{sec} += $sec;
-	    $funcs{$func}{calls} += $calls;
-	}
+        #                  %time      cumesec   selfsec     calls     {stuff}   name
+        if ($line =~ /^\s*([0-9.]+)\s+[0-9.]+\s+([0-9.]+)\s+([0-9.]+)\s+[^a-zA-Z_]*([a-zA-Z_].*)$/) {
+            my $pct=$1; my $sec=$2; my $calls=$3; my $func=$4;
+            $funcs{$func}{pct} += $pct;
+            $funcs{$func}{sec} += $sec;
+            $funcs{$func}{calls} += $calls;
+        }
         # Older gprofs have no call column for single-call functions
         #                  %time      cumesec   selfsec      {stuff}   name
         elsif ($line =~ /^\s*([0-9.]+)\s+[0-9.]+\s+([0-9.]+)\s+[^a-zA-Z_]*([a-zA-Z_].*)$/) {
@@ -88,10 +88,10 @@ sub profcfunc {
     my %pointer_mods;
     my %verilated_mods;
     foreach my $func (keys %funcs) {
-	if ($func =~ /(.*)::_eval\(([a-zA-Z_0-9]+__Syms).*\)$/) {
-	    $verilated_mods{$1} = qr/^$1/;
-	    $pointer_mods{$2} = $1;
-	}
+        if ($func =~ /(.*)::_eval\(([a-zA-Z_0-9]+__Syms).*\)$/) {
+            $verilated_mods{$1} = qr/^$1/;
+            $pointer_mods{$2} = $1;
+        }
     }
     #print Dumper(\%pointer_mods, \%verilated_mods);
 
@@ -99,72 +99,72 @@ sub profcfunc {
     my %vfuncs;
     my %groups;
     foreach my $func (keys %funcs) {
-	my $pct = $funcs{$func}{pct};
-	my $vfunc = $func;
-	my $design;
+        my $pct = $funcs{$func}{pct};
+        my $vfunc = $func;
+        my $design;
 
-	if ($func =~ /\(([a-zA-Z_0-9]+__Syms)/) {
-	    $design = $pointer_mods{$1};
-	}
+        if ($func =~ /\(([a-zA-Z_0-9]+__Syms)/) {
+            $design = $pointer_mods{$1};
+        }
 
-	foreach my $vde (keys %verilated_mods) {
-	    last if $design;
-	    if ($func =~ /$verilated_mods{$vde}/) {
-		$design=$vde;
-		last;
-	    }
-	}
+        foreach my $vde (keys %verilated_mods) {
+            last if $design;
+            if ($func =~ /$verilated_mods{$vde}/) {
+                $design=$vde;
+                last;
+            }
+        }
 
-	if ($vfunc =~ /__PROF__([a-zA-Z_0-9]+)__l?([0-9]+)\(/) {
-	    $vfunc     = sprintf("VBlock    %s:%d", $1, $2);
-	    $groups{type}{"Verilog Blocks under $design"} += $pct;
-	    $groups{design}{$design} += $pct;
-	    $groups{module}{$1} += $pct;
-	} else {
-	    if ($design) {
-		$vfunc = sprintf("VCommon   %s", $func);
-		$groups{type}{"Common code under $design"} += $pct;
-		$groups{design}{$design} += $pct;
-		$groups{module}{$design." common code"} += $pct;
-	    } elsif ($func =~ /^VL_[A-Z0-9_]+/
-		     || $func =~ /^_?vl_[a-zA-Z0-9_]+/
-		     || $func =~ /^verilated/i) {
-		$vfunc = sprintf("VLib      %s", $func);
-		$groups{type}{'VLib'} += $pct;
-		$groups{design}{'VLib'} += $pct;
-		$groups{module}{'VLib'} += $pct;
-	    } elsif ($func =~ /^_mcount_private/) {
-		$vfunc = sprintf("Prof      %s", $func);
-		$groups{type}{'Prof'} += $pct;
-		$groups{design}{'Prof'} += $pct;
-		$groups{module}{'Prof'} += $pct;
-	    } else {
-		$vfunc = sprintf("C++       %s", $func);
-		$groups{type}{'C++'} += $pct;
-		$groups{design}{'C++'} += $pct;
-		$groups{module}{'C++'} += $pct;
-	    }
-	}
-	$vfuncs{$vfunc} = $funcs{$func};
+        if ($vfunc =~ /__PROF__([a-zA-Z_0-9]+)__l?([0-9]+)\(/) {
+            $vfunc     = sprintf("VBlock    %s:%d", $1, $2);
+            $groups{type}{"Verilog Blocks under $design"} += $pct;
+            $groups{design}{$design} += $pct;
+            $groups{module}{$1} += $pct;
+        } else {
+            if ($design) {
+                $vfunc = sprintf("VCommon   %s", $func);
+                $groups{type}{"Common code under $design"} += $pct;
+                $groups{design}{$design} += $pct;
+                $groups{module}{$design." common code"} += $pct;
+            } elsif ($func =~ /^VL_[A-Z0-9_]+/
+                     || $func =~ /^_?vl_[a-zA-Z0-9_]+/
+                     || $func =~ /^verilated/i) {
+                $vfunc = sprintf("VLib      %s", $func);
+                $groups{type}{'VLib'} += $pct;
+                $groups{design}{'VLib'} += $pct;
+                $groups{module}{'VLib'} += $pct;
+            } elsif ($func =~ /^_mcount_private/) {
+                $vfunc = sprintf("Prof      %s", $func);
+                $groups{type}{'Prof'} += $pct;
+                $groups{design}{'Prof'} += $pct;
+                $groups{module}{'Prof'} += $pct;
+            } else {
+                $vfunc = sprintf("C++       %s", $func);
+                $groups{type}{'C++'} += $pct;
+                $groups{design}{'C++'} += $pct;
+                $groups{module}{'C++'} += $pct;
+            }
+        }
+        $vfuncs{$vfunc} = $funcs{$func};
     }
 
 
     foreach my $type (qw(type design module)) {
-	my $missing = 100;
-	foreach (sort (keys %{$groups{$type}})) {
-	    $missing -= $groups{$type}{$_};
-	}
-	if ($missing) {
-	    $groups{$type}{"\377Unaccounted for/rounding error"} = $missing;
-	}
+        my $missing = 100;
+        foreach (sort (keys %{$groups{$type}})) {
+            $missing -= $groups{$type}{$_};
+        }
+        if ($missing) {
+            $groups{$type}{"\377Unaccounted for/rounding error"} = $missing;
+        }
 
-	print("Overall summary by $type:\n");
-	printf("  %-6s  %s\n","% time",$type);
-	foreach my $what (sort (keys %{$groups{$type}})) {
-	    (my $pwhat = $what) =~ s/^\377//;  # Just used to establish sort order
-	    printf("  %6.2f  %s\n", $groups{$type}{$what}, $pwhat);
-	}
-	print("\n");
+        print("Overall summary by $type:\n");
+        printf("  %-6s  %s\n","% time",$type);
+        foreach my $what (sort (keys %{$groups{$type}})) {
+            (my $pwhat = $what) =~ s/^\377//;  # Just used to establish sort order
+            printf("  %6.2f  %s\n", $groups{$type}{$what}, $pwhat);
+        }
+        print("\n");
     }
 
     print("Verilog code profile:\n");
@@ -181,14 +181,14 @@ sub profcfunc {
 
     my $cume = 0;
     foreach my $func (sort {$vfuncs{$b}{sec} <=> $vfuncs{$a}{sec}
-			    || $a cmp $b}
-		      (keys %vfuncs)) {
-	$cume += $vfuncs{$func}{sec};
-	printf +("%6.2f %9.2f %8.2f %8d   %s\n",
-		 $vfuncs{$func}{pct},
-		 $cume, $vfuncs{$func}{sec},
-		 $vfuncs{$func}{calls},
-		 $func);
+                            || $a cmp $b}
+                      (keys %vfuncs)) {
+        $cume += $vfuncs{$func}{sec};
+        printf +("%6.2f %9.2f %8.2f %8d   %s\n",
+                 $vfuncs{$func}{pct},
+                 $cume, $vfuncs{$func}{sec},
+                 $vfuncs{$func}{calls},
+                 $func);
     }
 }
 
@@ -212,7 +212,7 @@ verilator_profcfunc - Read gprof report created with --prof-cfuncs
 =head1 DESCRIPTION
 
 Verilator_profcfunc reads a profile report created by gprof.  The names of
-the functions are then transformed, assuming the user used verilator's
+the functions are then transformed, assuming the user used Verilator's
 --prof-cfuncs, and a report printed showing the percentage of time, etc,
 in each Verilog block.
 
@@ -230,7 +230,7 @@ Displays this message and program version and exits.
 
 The latest version is available from L<http://www.veripool.org/>.
 
-Copyright 2007-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2007-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

configure.ac

@@ -1,19 +1,19 @@
 # DESCRIPTION: Process this file with autoconf to produce a configure script.
 #
-# Copyright 2003-2018 by Wilson Snyder. Verilator is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. Verilator is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU Lesser
 # General Public License Version 3 or the Perl Artistic License Version 2.0.
 
 #AC_INIT([Verilator],[#.### YYYY-MM-DD])
 #AC_INIT([Verilator],[#.### devel])
-AC_INIT([Verilator],[4.006 2018-10-27],
+AC_INIT([Verilator],[4.018 2019-08-29],
         [https://www.veripool.org/verilator],
         [verilator],[https://www.veripool.org/verilator])
 # When releasing, also update header of Changes file
 # and commit using "devel release" or "Version bump" message
 
 AC_CONFIG_HEADER(src/config_build.h)
-AC_CONFIG_FILES(Makefile src/Makefile src/Makefile_obj include/verilated.mk include/verilated_config.h verilator.pc)
+AC_CONFIG_FILES(Makefile docs/Makefile src/Makefile src/Makefile_obj include/verilated.mk include/verilated_config.h verilator.pc)
 
 AC_MSG_RESULT([configuring for $PACKAGE_STRING])
 
@@ -91,10 +91,10 @@ AC_SUBST(CFG_WITH_PREC11)
 AC_MSG_RESULT($CFG_WITH_PREC11)
 
 # Compiler flags
-CFLAGS=-I${includedir}
-CPPFLAGS=-I${includedir}
-CXXFLAGS=-I${includedir}
-LDFLAGS=-L${libdir}
+CFLAGS+=" -I${includedir}"
+CPPFLAGS+=" -I${includedir}"
+CXXFLAGS+=" -I${includedir}"
+LDFLAGS+=" -L${libdir}"
 
 # Checks for programs.
 AC_PROG_CC
@@ -273,7 +273,9 @@ AC_SUBST(CFG_CXXFLAGS_PARSER)
 # without this flag, even though there's a conditional to prevent the divide.
 # We still don't add no-div-by-zero as it throws message to stdout, though doesn't die.
 #_MY_CXX_CHECK_OPT(-Wno-div-by-zero)
-_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-faligned-new)
+# For some reason -faligned-new does not work under Travis w/ clang but the
+# configure test doesn't catch this either
+AS_IF([test "x$TRAVIS_COMPILER" != xclang], [_MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-faligned-new)])
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-fbracket-depth=4096)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Qunused-arguments)
 _MY_CXX_CHECK_OPT(CFG_CXXFLAGS_NO_UNUSED,-Wno-bool-operation)

docs/.gitignore

@@ -0,0 +1 @@
+Makefile

docs/CONTRIBUTORS

@@ -0,0 +1,17 @@
+The contributors listed below have certified their Verilator contributions
+under the Developer Certificate of Origin
+(https://developercertificate.org/).
+
+Please see the Verilator manual for additional contributors.
+
+Alex Chadwick
+Gianfranco Costamagna
+Jeremy Bennett
+John Coiner
+Kanad Kanhere
+Maarten De Braekeleer
+Philipp Wagner
+Richard Myers
+Sebastien Van Cauwenberghe
+Stefan Wallentowitz
+Wilson Snyder

docs/Makefile.in

@@ -0,0 +1,50 @@
+#*****************************************************************************
+# DESCRIPTION: Verilator documentation: Makefile pre-configure version
+#
+# This file is part of Verilator.
+#
+# Code available from: http://www.veripool.org/verilator
+#
+#*****************************************************************************
+#
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
+# redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+#
+# Verilator is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+#****************************************************************************/
+#
+# This file is intended only to be called from the top-level Verilator Makefile.
+
+#### Start of system configuration section. ####
+
+DOXYGEN = doxygen
+
+#### End of system configuration section. ####
+######################################################################
+
+.SUFFIXES:
+
+default:
+	@echo "error: make not supported here, run 'make docs' from Verilator top-level"
+
+clean mostlyclean distclean maintainer-clean::
+	rm -f $(SCRIPTS) *.tmp
+	rm -f *.aux *.cp *.cps *.dvi *.fn *.fns *.ky *.kys *.log
+	rm -f *.pg *.pgs *.toc *.tp *.tps *.vr *.vrs *.idx
+	rm -f *.ev *.evs *.ov *.ovs *.cv *.cvs *.ma *.mas
+	rm -f *.tex
+
+distclean maintainer-clean::
+	rm -f *.info* *.1 $(INFOS)
+	rm -f Makefile
+
+.PHONY: doxygen
+
+doxygen:
+	$(DOXYGEN) doxygen.config

docs/TODO

@@ -1,6 +1,6 @@
 // DESCRIPTION: Verilator: List of To Do issues.
 //
-// Copyright 2004-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2004-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.

docs/doxygen.config

@@ -45,7 +45,7 @@ PROJECT_BRIEF          = "Verilog to C translator"
 # exceed 55 pixels and the maximum width should not exceed 200 pixels.
 # Doxygen will copy the logo to the output directory.
 
-PROJECT_LOGO           = veripool-logo.png
+PROJECT_LOGO           = verilator_logo.png
 
 # The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)
 # base path where the generated documentation will be put.

examples/hello_world_c/Makefile

@@ -5,7 +5,7 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -24,7 +24,7 @@ endif
 # e.g. examples/tracing_c.
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator

examples/hello_world_sc/Makefile

@@ -5,7 +5,7 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -24,7 +24,7 @@ endif
 # e.g. examples/tracing_sc.
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator

examples/tracing_c/Makefile

@@ -5,7 +5,7 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -21,7 +21,7 @@ endif
 # Set up variables
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator

examples/tracing_c/Makefile_obj

@@ -5,7 +5,7 @@
 #
 # This is executed in the object directory, and called by ../Makefile
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.

examples/tracing_c/sim_main.cpp

@@ -27,17 +27,21 @@ int main(int argc, char** argv, char** env) {
 
     // Prevent unused variable warnings
     if (0 && argc && argv && env) {}
-    // Pass arguments so Verilated code can see them, e.g. $value$plusargs
-    Verilated::commandArgs(argc, argv);
 
     // Set debug level, 0 is off, 9 is highest presently used
+    // May be overridden by commandArgs
     Verilated::debug(0);
 
     // Randomization reset policy
+    // May be overridden by commandArgs
     Verilated::randReset(2);
 
+    // Pass arguments so Verilated code can see them, e.g. $value$plusargs
+    // This needs to be called before you create any model
+    Verilated::commandArgs(argc, argv);
+
     // Construct the Verilated model, from Vtop.h generated from Verilating "top.v"
-    Vtop* top = new Vtop; // Or use a const unique_ptr, or the VL_UNIQUE_PTR wrapper
+    Vtop* top = new Vtop;  // Or use a const unique_ptr, or the VL_UNIQUE_PTR wrapper
 
 #if VM_TRACE
     // If verilator was invoked with --trace argument,
@@ -90,14 +94,14 @@ int main(int argc, char** argv, char** env) {
 
 #if VM_TRACE
         // Dump trace data for this cycle
-        if (tfp) tfp->dump (main_time);
+        if (tfp) tfp->dump(main_time);
 #endif
 
         // Read outputs
-        VL_PRINTF ("[%" VL_PRI64 "d] clk=%x rstl=%x iquad=%" VL_PRI64 "x"
-                   " -> oquad=%" VL_PRI64"x owide=%x_%08x_%08x\n",
-                   main_time, top->clk, top->reset_l, top->in_quad,
-                   top->out_quad, top->out_wide[2], top->out_wide[1], top->out_wide[0]);
+        VL_PRINTF("[%" VL_PRI64 "d] clk=%x rstl=%x iquad=%" VL_PRI64 "x"
+                  " -> oquad=%" VL_PRI64"x owide=%x_%08x_%08x\n",
+                  main_time, top->clk, top->reset_l, top->in_quad,
+                  top->out_quad, top->out_wide[2], top->out_wide[1], top->out_wide[0]);
     }
 
     // Final model cleanup

examples/tracing_c/top.v

@@ -14,18 +14,18 @@ module top
    input         fastclk,
    input         reset_l,
 
-   output [1:0]  out_small,
-   output [39:0] out_quad,
-   output [69:0] out_wide,
+   output wire [1:0]  out_small,
+   output wire [39:0] out_quad,
+   output wire [69:0] out_wide,
    input [1:0]   in_small,
    input [39:0]  in_quad,
    input [69:0]  in_wide
    );
 
    // Connect up the outputs, using some trivial logic
-   wire [1:0]    out_small = ~reset_l ? '0 : (in_small + 2'b1);
-   wire [39:0]   out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
-   wire [69:0]   out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
+   assign out_small = ~reset_l ? '0 : (in_small + 2'b1);
+   assign out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
+   assign out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
 
    // And an example sub module. The submodule will print stuff.
    sub sub (/*AUTOINST*/

examples/tracing_sc/Makefile

@@ -5,7 +5,7 @@
 # This calls the object directory makefile.  That allows the objects to
 # be placed in the "current directory" which simplifies the Makefile.
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -21,7 +21,7 @@ endif
 # Set up variables
 
 # If $VERILATOR_ROOT isn't in the environment, we assume it is part of a
-# package inatall, and verilator is in your path. Otherwise find the
+# package install, and verilator is in your path. Otherwise find the
 # binary relative to $VERILATOR_ROOT (such as when inside the git sources).
 ifeq ($(VERILATOR_ROOT),)
 VERILATOR = verilator

examples/tracing_sc/Makefile_obj

@@ -5,7 +5,7 @@
 #
 # This is executed in the object directory, and called by ../Makefile
 #
-# Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.

examples/tracing_sc/sc_main.cpp

@@ -24,15 +24,19 @@ int sc_main(int argc, char* argv[]) {
 
     // Prevent unused variable warnings
     if (0 && argc && argv) {}
-    // Pass arguments so Verilated code can see them, e.g. $value$plusargs
-    Verilated::commandArgs(argc, argv);
 
     // Set debug level, 0 is off, 9 is highest presently used
+    // May be overridden by commandArgs
     Verilated::debug(0);
 
     // Randomization reset policy
+    // May be overridden by commandArgs
     Verilated::randReset(2);
 
+    // Pass arguments so Verilated code can see them, e.g. $value$plusargs
+    // This needs to be called before you create any model
+    Verilated::commandArgs(argc, argv);
+
     // General logfile
     ios::sync_with_stdio();
 
@@ -95,7 +99,7 @@ int sc_main(int argc, char* argv[]) {
     if (flag && 0==strcmp(flag, "+trace")) {
         cout << "Enabling waves into logs/vlt_dump.vcd...\n";
         tfp = new VerilatedVcdSc;
-        top->trace(tfp, 99);
+        top->trace(tfp, 99);  // Trace 99 levels of hierarchy
         Verilated::mkdir("logs");
         tfp->open("logs/vlt_dump.vcd");
     }
@@ -111,9 +115,9 @@ int sc_main(int argc, char* argv[]) {
 
         // Apply inputs
         if (VL_TIME_Q() > 1 && VL_TIME_Q() < 10) {
-            reset_l = !1;       // Assert reset
+            reset_l = !1;  // Assert reset
         } else if (VL_TIME_Q() > 1) {
-            reset_l = !0;       // Deassert reset
+            reset_l = !0;  // Deassert reset
         }
 
         // Simulate 1ns

examples/tracing_sc/sub.v

@@ -49,7 +49,7 @@ module sub
 
    // An example assertion
    always_ff @ (posedge clk) begin
-      AssertionExample: assert (!reset_l || count_c<100);
+      AssertionExample: assert(!reset_l || count_c<100);
    end
 
    // And example coverage analysis

examples/tracing_sc/top.v

@@ -14,18 +14,18 @@ module top
    input         fastclk,
    input         reset_l,
 
-   output [1:0]  out_small,
-   output [39:0] out_quad,
-   output [69:0] out_wide,
+   output wire [1:0]  out_small,
+   output wire [39:0] out_quad,
+   output wire [69:0] out_wide,
    input [1:0]   in_small,
    input [39:0]  in_quad,
    input [69:0]  in_wide
    );
 
    // Connect up the outputs, using some trivial logic
-   wire [1:0]    out_small = ~reset_l ? '0 : (in_small + 2'b1);
-   wire [39:0]   out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
-   wire [69:0]   out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
+   assign out_small = ~reset_l ? '0 : (in_small + 2'b1);
+   assign out_quad  = ~reset_l ? '0 : (in_quad + 40'b1);
+   assign out_wide  = ~reset_l ? '0 : (in_wide + 70'b1);
 
    // And an example sub module. The submodule will print stuff.
    sub sub (/*AUTOINST*/

include/gtkwave/fst_config.h

@@ -2,11 +2,7 @@
 /* config.h.  Generated from config.h.in by configure.  */
 /* config.h.in.  Generated from configure.ac by autoheader.  */
 
-/* Define to 1 if you have `alloca', as a function or macro. */
-#define HAVE_ALLOCA 1
-
 /* Define to 1 if you have <alloca.h> and it should be used (not on Ultrix). */
-#define HAVE_ALLOCA_H 1
 #if !defined(__MINGW32__)
 # define HAVE_ALLOCA_H 1
 #endif

include/gtkwave/fstapi.c

@@ -196,7 +196,7 @@ if(nam) /* cppcheck warning fix: nam is always defined, so this is not needed */
         dwRetVal = GetTempPath(MAX_PATH, lpTempPathBuffer);
         if((dwRetVal > MAX_PATH) || (dwRetVal == 0))
                 {
-                fprintf(stderr, FST_APIMESS"GetTempPath() failed in "__FILE__" line %d, exiting.\n", __LINE__);
+                fprintf(stderr, FST_APIMESS "GetTempPath() failed in " __FILE__ " line %d, exiting.\n", __LINE__);
                 exit(255);
                 }
                 else
@@ -204,7 +204,7 @@ if(nam) /* cppcheck warning fix: nam is always defined, so this is not needed */
                 uRetVal = GetTempFileName(lpTempPathBuffer, TEXT("FSTW"), 0, szTempFileName);
                 if (uRetVal == 0)
                         {
-                        fprintf(stderr, FST_APIMESS"GetTempFileName() failed in "__FILE__" line %d, exiting.\n", __LINE__);
+                        fprintf(stderr, FST_APIMESS "GetTempFileName() failed in " __FILE__ " line %d, exiting.\n", __LINE__);
                         exit(255);
                         }
                         else
@@ -663,6 +663,7 @@ return(rc);
 }
 
 
+#ifndef FST_DYNAMIC_ALIAS2_DISABLE
 static int fstWriterSVarint(FILE *handle, int64_t v)
 {
 unsigned char buf[15]; /* ceil(64/7) = 10 + sign byte padded way up */
@@ -688,6 +689,7 @@ len = pnt-buf;
 fstFwrite(buf, len, 1, handle);
 return(len);
 }
+#endif
 
 
 /***********************/
@@ -808,7 +810,7 @@ if(rc<0)
         {
         xc->fseek_failed = 1;
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"Seek to #%" PRId64 " (whence = %d) failed!\n", offset, whence);
+        fprintf(stderr, FST_APIMESS "Seek to #%" PRId64 " (whence = %d) failed!\n", offset, whence);
         perror("Why");
 #endif
         }
@@ -1668,7 +1670,7 @@ if(zerocnt)
         /* fpos += */ fstWriterVarint(f, (zerocnt << 1)); /* scan-build */
         }
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"value chains: %d\n", cnt);
+fprintf(stderr, FST_APIMESS "value chains: %d\n", cnt);
 #endif
 
 xc->vchg_mem[0] = '!';
@@ -1743,7 +1745,7 @@ if(xc->dump_size_limit)
                 xc2->size_limit_locked = 1;
                 xc2->is_initial_time = 1; /* to trick emit value and emit time change */
 #ifdef FST_DEBUG
-                fprintf(stderr, FST_APIMESS"<< dump file size limit reached, stopping dumping >>\n");
+                fprintf(stderr, FST_APIMESS "<< dump file size limit reached, stopping dumping >>\n");
 #endif
                 }
         }
@@ -2483,7 +2485,7 @@ if(xc)
 #ifndef FST_WRITER_PARALLEL
         if(xc->parallel_enabled)
                 {
-                fprintf(stderr, FST_APIMESS"fstWriterSetParallelMode(), FST_WRITER_PARALLEL not enabled during compile, exiting.\n");
+                fprintf(stderr, FST_APIMESS "fstWriterSetParallelMode(), FST_WRITER_PARALLEL not enabled during compile, exiting.\n");
                 exit(255);
                 }
 #endif
@@ -2808,8 +2810,8 @@ if(ctx && name && literal_arr && val_arr && (elem_count != 0))
 	attr_str[pos-1] = 0;
 
 #ifdef FST_DEBUG
-	fprintf(stderr, FST_APIMESS"fstWriterCreateEnumTable() total_len: %d, pos: %d\n", total_len, pos);
-	fprintf(stderr, FST_APIMESS"*%s*\n", attr_str);
+	fprintf(stderr, FST_APIMESS "fstWriterCreateEnumTable() total_len: %d, pos: %d\n", total_len, pos);
+	fprintf(stderr, FST_APIMESS "*%s*\n", attr_str);
 #endif
 
 	fstWriterSetAttrBegin(xc, FST_AT_MISC, FST_MT_ENUMTABLE, attr_str, handle = ++xc->max_enumhandle);
@@ -2870,7 +2872,7 @@ if((xc) && (handle <= xc->maxhandle))
                                 xc->vchg_mem = (unsigned char *)realloc(xc->vchg_mem, xc->vchg_alloc_siz);
                                 if(!xc->vchg_mem)
                                         {
-                                        fprintf(stderr, FST_APIMESS"Could not realloc() in fstWriterEmitValueChange, exiting.\n");
+                                        fprintf(stderr, FST_APIMESS "Could not realloc() in fstWriterEmitValueChange, exiting.\n");
                                         exit(255);
                                         }
                                 }
@@ -2984,7 +2986,7 @@ if((xc) && (handle <= xc->maxhandle))
                         xc->vchg_mem = (unsigned char *)realloc(xc->vchg_mem, xc->vchg_alloc_siz);
                         if(!xc->vchg_mem)
                                 {
-                                fprintf(stderr, FST_APIMESS"Could not realloc() in fstWriterEmitVariableLengthValueChange, exiting.\n");
+                                fprintf(stderr, FST_APIMESS "Could not realloc() in fstWriterEmitVariableLengthValueChange, exiting.\n");
                                 exit(255);
                                 }
                         }
@@ -3229,7 +3231,7 @@ if(rc<0)
         {
         xc->fseek_failed = 1;
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"Seek to #%" PRId64 " (whence = %d) failed!\n", offset, whence);
+        fprintf(stderr, FST_APIMESS "Seek to #%" PRId64 " (whence = %d) failed!\n", offset, whence);
         perror("Why");
 #endif
         }
@@ -4549,7 +4551,7 @@ if(gzread_pass_status)
 
                                         if(rc != Z_OK)
                                                 {
-                                                fprintf(stderr, FST_APIMESS"fstReaderInit(), geom uncompress rc = %d, exiting.\n", rc);
+                                                fprintf(stderr, FST_APIMESS "fstReaderInit(), geom uncompress rc = %d, exiting.\n", rc);
                                                 exit(255);
                                                 }
 
@@ -4810,6 +4812,7 @@ uint32_t cur_blackout = 0;
 int packtype;
 unsigned char *mc_mem = NULL;
 uint32_t mc_mem_len; /* corresponds to largest value encountered in chain_table_lengths[i] */
+int dumpvars_state = 0;
 
 if(!xc) return(0);
 
@@ -4819,7 +4822,6 @@ length_remaining = (uint32_t *)calloc(xc->maxhandle, sizeof(uint32_t));
 
 if(fv)
         {
-        fprintf(fv, "$dumpvars\n");
 #ifndef FST_WRITEX_DISABLE
         fflush(fv);
         setvbuf(fv, (char *) NULL, _IONBF, 0); /* even buffered IO is slow so disable it and use our own routines that don't need seeking */
@@ -4840,7 +4842,7 @@ for(;;)
         if((sectype == EOF) || (sectype == FST_BL_SKIP))
                 {
 #ifdef FST_DEBUG
-                fprintf(stderr, FST_APIMESS"<< EOF >>\n");
+                fprintf(stderr, FST_APIMESS "<< EOF >>\n");
 #endif
                 break;
                 }
@@ -4879,9 +4881,9 @@ for(;;)
         mem_required_for_traversal = fstReaderUint64(xc->f);
         mem_for_traversal = (unsigned char *)malloc(mem_required_for_traversal + 66); /* add in potential fastlz overhead */
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"sec: %u seclen: %d begtim: %d endtim: %d\n",
+        fprintf(stderr, FST_APIMESS "sec: %u seclen: %d begtim: %d endtim: %d\n",
                 secnum, (int)seclen, (int)beg_tim, (int)end_tim);
-        fprintf(stderr, FST_APIMESS"mem_required_for_traversal: %d\n", (int)mem_required_for_traversal);
+        fprintf(stderr, FST_APIMESS "mem_required_for_traversal: %d\n", (int)mem_required_for_traversal);
 #endif
         /* process time block */
         {
@@ -4899,7 +4901,7 @@ for(;;)
         tsec_clen = fstReaderUint64(xc->f);
         tsec_nitems = fstReaderUint64(xc->f);
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"time section unc: %d, com: %d (%d items)\n",
+        fprintf(stderr, FST_APIMESS "time section unc: %d, com: %d (%d items)\n",
                 (int)tsec_uclen, (int)tsec_clen, (int)tsec_nitems);
 #endif
         if(tsec_clen > seclen) break; /* corrupted tsec_clen: by definition it can't be larger than size of section */
@@ -4919,7 +4921,7 @@ for(;;)
 
                 if(rc != Z_OK)
                         {
-                        fprintf(stderr, FST_APIMESS"fstReaderIterBlocks2(), tsec uncompress rc = %d, exiting.\n", rc);
+                        fprintf(stderr, FST_APIMESS "fstReaderIterBlocks2(), tsec uncompress rc = %d, exiting.\n", rc);
                         exit(255);
                         }
 
@@ -4966,8 +4968,10 @@ for(;;)
 
                                 if(beg_tim)
                                         {
+					if(dumpvars_state == 1) { wx_len = sprintf(wx_buf, "$end\n"); fstWritex(xc, wx_buf, wx_len); dumpvars_state = 2; }
                                         wx_len = sprintf(wx_buf, "#%" PRIu64 "\n", beg_tim);
                                         fstWritex(xc, wx_buf, wx_len);
+					if(!dumpvars_state) { wx_len = sprintf(wx_buf, "$dumpvars\n"); fstWritex(xc, wx_buf, wx_len); dumpvars_state = 1; }
                                         }
                                 if((xc->num_blackouts)&&(cur_blackout != xc->num_blackouts))
                                         {
@@ -4995,7 +4999,7 @@ for(;;)
                                 rc = uncompress(mu, &destlen, mc, sourcelen);
                                 if(rc != Z_OK)
                                         {
-                                        fprintf(stderr, FST_APIMESS"fstReaderIterBlocks2(), frame uncompress rc: %d, exiting.\n", rc);
+                                        fprintf(stderr, FST_APIMESS "fstReaderIterBlocks2(), frame uncompress rc: %d, exiting.\n", rc);
                                         exit(255);
                                         }
                                 free(mc);
@@ -5158,9 +5162,9 @@ for(;;)
         packtype = fgetc(xc->f);
 
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"frame_uclen: %d, frame_clen: %d, frame_maxhandle: %d\n",
+        fprintf(stderr, FST_APIMESS "frame_uclen: %d, frame_clen: %d, frame_maxhandle: %d\n",
                 (int)frame_uclen, (int)frame_clen, (int)frame_maxhandle);
-        fprintf(stderr, FST_APIMESS"vc_maxhandle: %d, packtype: %c\n", (int)vc_maxhandle, packtype);
+        fprintf(stderr, FST_APIMESS "vc_maxhandle: %d, packtype: %c\n", (int)vc_maxhandle, packtype);
 #endif
 
         indx_pntr = blkpos + seclen - 24 -tsec_clen -8;
@@ -5168,7 +5172,7 @@ for(;;)
         chain_clen = fstReaderUint64(xc->f);
         indx_pos = indx_pntr - chain_clen;
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"indx_pos: %d (%d bytes)\n", (int)indx_pos, (int)chain_clen);
+        fprintf(stderr, FST_APIMESS "indx_pos: %d (%d bytes)\n", (int)indx_pos, (int)chain_clen);
 #endif
         chain_cmem = (unsigned char *)malloc(chain_clen);
         if(!chain_cmem) goto block_err;
@@ -5287,7 +5291,7 @@ for(;;)
                 }
 
 #ifdef FST_DEBUG
-        fprintf(stderr, FST_APIMESS"decompressed chain idx len: %" PRIu32 "\n", idx);
+        fprintf(stderr, FST_APIMESS "decompressed chain idx len: %" PRIu32 "\n", idx);
 #endif
 
         mc_mem_len = 16384;
@@ -5355,7 +5359,7 @@ for(;;)
 
                                 if(rc != Z_OK)
                                         {
-                                        fprintf(stderr, FST_APIMESS"fstReaderIterBlocks2(), fac: %d clen: %d (rc=%d), exiting.\n", (int)i, (int)val, rc);
+                                        fprintf(stderr, FST_APIMESS "fstReaderIterBlocks2(), fac: %d clen: %d (rc=%d), exiting.\n", (int)i, (int)val, rc);
                                         exit(255);
                                         }
 
@@ -5400,8 +5404,10 @@ for(;;)
                                                 }
                                         }
 
+				if(dumpvars_state == 1) { wx_len = sprintf(wx_buf, "$end\n"); fstWritex(xc, wx_buf, wx_len); dumpvars_state = 2; }
                                 wx_len = sprintf(wx_buf, "#%" PRIu64 "\n", time_table[i]);
                                 fstWritex(xc, wx_buf, wx_len);
+				if(!dumpvars_state) { wx_len = sprintf(wx_buf, "$dumpvars\n"); fstWritex(xc, wx_buf, wx_len); dumpvars_state = 1; }
 
                                 if((xc->num_blackouts)&&(cur_blackout != xc->num_blackouts))
                                         {
@@ -5907,9 +5913,9 @@ mem_required_for_traversal =
         fstReaderUint64(xc->f);
 
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"rvat sec: %u seclen: %d begtim: %d endtim: %d\n",
+fprintf(stderr, FST_APIMESS "rvat sec: %u seclen: %d begtim: %d endtim: %d\n",
         secnum, (int)seclen, (int)beg_tim, (int)end_tim);
-fprintf(stderr, FST_APIMESS"mem_required_for_traversal: %d\n", (int)mem_required_for_traversal);
+fprintf(stderr, FST_APIMESS "mem_required_for_traversal: %d\n", (int)mem_required_for_traversal);
 #endif
 
 /* process time block */
@@ -5928,7 +5934,7 @@ tsec_uclen = fstReaderUint64(xc->f);
 tsec_clen = fstReaderUint64(xc->f);
 tsec_nitems = fstReaderUint64(xc->f);
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"time section unc: %d, com: %d (%d items)\n",
+fprintf(stderr, FST_APIMESS "time section unc: %d, com: %d (%d items)\n",
         (int)tsec_uclen, (int)tsec_clen, (int)tsec_nitems);
 #endif
 ucdata = (unsigned char *)malloc(tsec_uclen);
@@ -5945,7 +5951,7 @@ if(tsec_uclen != tsec_clen)
 
         if(rc != Z_OK)
                 {
-                fprintf(stderr, FST_APIMESS"fstReaderGetValueFromHandleAtTime(), tsec uncompress rc = %d, exiting.\n", rc);
+                fprintf(stderr, FST_APIMESS "fstReaderGetValueFromHandleAtTime(), tsec uncompress rc = %d, exiting.\n", rc);
                 exit(255);
                 }
 
@@ -5993,7 +5999,7 @@ if(frame_uclen == frame_clen)
         rc = uncompress(xc->rvat_frame_data, &destlen, mc, sourcelen);
         if(rc != Z_OK)
                 {
-                fprintf(stderr, FST_APIMESS"fstReaderGetValueFromHandleAtTime(), frame decompress rc: %d, exiting.\n", rc);
+                fprintf(stderr, FST_APIMESS "fstReaderGetValueFromHandleAtTime(), frame decompress rc: %d, exiting.\n", rc);
                 exit(255);
                 }
         free(mc);
@@ -6004,9 +6010,9 @@ xc->rvat_vc_start = ftello(xc->f);      /* points to '!' character */
 xc->rvat_packtype = fgetc(xc->f);
 
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"frame_uclen: %d, frame_clen: %d, frame_maxhandle: %d\n",
+fprintf(stderr, FST_APIMESS "frame_uclen: %d, frame_clen: %d, frame_maxhandle: %d\n",
         (int)frame_uclen, (int)frame_clen, (int)xc->rvat_frame_maxhandle);
-fprintf(stderr, FST_APIMESS"vc_maxhandle: %d\n", (int)xc->rvat_vc_maxhandle);
+fprintf(stderr, FST_APIMESS "vc_maxhandle: %d\n", (int)xc->rvat_vc_maxhandle);
 #endif
 
 indx_pntr = blkpos + seclen - 24 -tsec_clen -8;
@@ -6014,7 +6020,7 @@ fstReaderFseeko(xc, xc->f, indx_pntr, SEEK_SET);
 chain_clen = fstReaderUint64(xc->f);
 indx_pos = indx_pntr - chain_clen;
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"indx_pos: %d (%d bytes)\n", (int)indx_pos, (int)chain_clen);
+fprintf(stderr, FST_APIMESS "indx_pos: %d (%d bytes)\n", (int)indx_pos, (int)chain_clen);
 #endif
 chain_cmem = (unsigned char *)malloc(chain_clen);
 fstReaderFseeko(xc, xc->f, indx_pos, SEEK_SET);
@@ -6125,7 +6131,7 @@ for(i=0;i<idx;i++)
         }
 
 #ifdef FST_DEBUG
-fprintf(stderr, FST_APIMESS"decompressed chain idx len: %" PRIu32 "\n", idx);
+fprintf(stderr, FST_APIMESS "decompressed chain idx len: %" PRIu32 "\n", idx);
 #endif
 
 xc->rvat_data_valid = 1;
@@ -6185,7 +6191,7 @@ if(!xc->rvat_chain_mem)
 
                 if(rc != Z_OK)
                         {
-                        fprintf(stderr, FST_APIMESS"fstReaderGetValueFromHandleAtTime(), rvat decompress clen: %d (rc=%d), exiting.\n", (int)xc->rvat_chain_len, rc);
+                        fprintf(stderr, FST_APIMESS "fstReaderGetValueFromHandleAtTime(), rvat decompress clen: %d (rc=%d), exiting.\n", (int)xc->rvat_chain_len, rc);
                         exit(255);
                         }
 

include/gtkwave/lxt2_write.h

@@ -1,314 +0,0 @@
-/*
- * Copyright (c) 2003-2012 Tony Bybell.
- *
- * Permission is hereby granted, free of charge, to any person obtaining a
- * copy of this software and associated documentation files (the "Software"),
- * to deal in the Software without restriction, including without limitation
- * the rights to use, copy, modify, merge, publish, distribute, sublicense,
- * and/or sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
- * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
- * DEALINGS IN THE SOFTWARE.
- */
-
-#ifndef DEFS_LXTW_H
-#define DEFS_LXTW_H
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <ctype.h>
-#include <errno.h>
-#include <unistd.h>
-#include <stdint.h>
-#include <zlib.h>
-
-#ifndef HAVE_FSEEKO
-#define fseeko fseek
-#define ftello ftell
-#endif
-
-#include "wavealloca.h"
-
-#define LXT2_WR_HDRID (0x1380)
-#define LXT2_WR_VERSION (0x0001)
-
-#define LXT2_WR_GRANULE_SIZE (64)
-#define LXT2_WR_GRANULE_NUM (256)
-#define LXT2_WR_PARTIAL_SIZE (2048)
-
-#define LXT2_WR_GRAN_SECT_TIME 0
-#define LXT2_WR_GRAN_SECT_DICT 1
-#define LXT2_WR_GRAN_SECT_TIME_PARTIAL 2
-
-#define LXT2_WR_GZWRITE_BUFFER 4096
-#define LXT2_WR_SYMPRIME 500009
-
-typedef uint64_t lxttime_t;
-typedef  int64_t lxtstime_t;
-
-
-#ifndef _MSC_VER
-	#ifdef __MINGW32__
-		#define LXT2_WR_LLD "%I64d"
-	#else
-        	#define LXT2_WR_LLD "%lld"
-	#endif
-        #define LXT2_WR_LLDESC(x) x##LL
-        #define LXT2_WR_ULLDESC(x) x##ULL
-#else
-        #define LXT2_WR_LLD "%I64d"
-        #define LXT2_WR_LLDESC(x) x##i64
-        #define LXT2_WR_ULLDESC(x) x##i64
-#endif
-
-#if LXT2_WR_GRANULE_SIZE > 32
-typedef unsigned long long granmsk_t;
-#define LXT2_WR_GRAN_0VAL (LXT2_WR_ULLDESC(0))
-#define LXT2_WR_GRAN_1VAL (LXT2_WR_ULLDESC(1))
-#else
-typedef unsigned int granmsk_t;
-#define LXT2_WR_GRAN_0VAL (0)
-#define LXT2_WR_GRAN_1VAL (1)
-#endif
-
-
-enum LXT2_WR_Encodings {
-	LXT2_WR_ENC_0,
-	LXT2_WR_ENC_1,
-	LXT2_WR_ENC_INV,
-	LXT2_WR_ENC_LSH0,
-	LXT2_WR_ENC_LSH1,
-	LXT2_WR_ENC_RSH0,
-	LXT2_WR_ENC_RSH1,
-
-	LXT2_WR_ENC_ADD1,
-	LXT2_WR_ENC_ADD2,
-	LXT2_WR_ENC_ADD3,
-	LXT2_WR_ENC_ADD4,
-
-	LXT2_WR_ENC_SUB1,
-	LXT2_WR_ENC_SUB2,
-	LXT2_WR_ENC_SUB3,
-	LXT2_WR_ENC_SUB4,
-
-	LXT2_WR_ENC_X,
-	LXT2_WR_ENC_Z,
-
-	LXT2_WR_ENC_BLACKOUT,
-
-	LXT2_WR_DICT_START
-	};
-
-/*
- * integer splay
- */
-typedef struct lxt2_wr_ds_tree_node lxt2_wr_ds_Tree;
-struct lxt2_wr_ds_tree_node {
-    lxt2_wr_ds_Tree * left, * right;
-    granmsk_t item;
-    int val;
-    lxt2_wr_ds_Tree * next;
-};
-
-
-/*
- * string splay
- */
-typedef struct lxt2_wr_dslxt_tree_node lxt2_wr_dslxt_Tree;
-struct lxt2_wr_dslxt_tree_node {
-    lxt2_wr_dslxt_Tree * left, * right;
-    char *item;
-    unsigned int val;
-    lxt2_wr_dslxt_Tree * next;
-};
-
-
-struct lxt2_wr_trace
-{
-FILE *handle;
-gzFile zhandle;
-
-lxt2_wr_dslxt_Tree *dict;	/* dictionary manipulation */
-unsigned int num_dict_entries;
-unsigned int dict_string_mem_required;
-lxt2_wr_dslxt_Tree *dict_head;
-lxt2_wr_dslxt_Tree *dict_curr;
-
-lxt2_wr_ds_Tree *mapdict;	/* bitmap compression */
-unsigned int num_map_entries;
-lxt2_wr_ds_Tree *mapdict_head;
-lxt2_wr_ds_Tree *mapdict_curr;
-
-off_t position;
-off_t zfacname_predec_size, zfacname_size, zfacgeometry_size;
-off_t zpackcount, zpackcount_cumulative;
-off_t current_chunk, current_chunkz;
-
-struct lxt2_wr_symbol *sym[LXT2_WR_SYMPRIME];
-struct lxt2_wr_symbol **sorted_facs;
-struct lxt2_wr_symbol *symchain;
-unsigned int numfacs, numalias;
-int numfacbytes;
-int longestname;
-
-int numsections, numblock;
-off_t facname_offset, facgeometry_offset;
-
-lxttime_t mintime, maxtime;
-lxtstime_t timezero;
-unsigned int timegranule;
-int timescale;
-unsigned int timepos;
-unsigned int maxgranule;
-lxttime_t firsttime, lasttime;
-lxttime_t timetable[LXT2_WR_GRANULE_SIZE];
-
-unsigned int partial_iter;
-
-char *compress_fac_str;
-int compress_fac_len;
-
-lxttime_t flushtime;
-unsigned flush_valid : 1;
-
-unsigned do_strip_brackets : 1;
-unsigned emitted : 1;			/* gate off change field zmode changes when set */
-unsigned timeset : 1;			/* time has been modified from 0..0 */
-unsigned bumptime : 1;			/* says that must go to next time position in granule as value change exists for current time */
-unsigned granule_dirty : 1;		/* for flushing out final block */
-unsigned blackout : 1;			/* blackout on/off */
-unsigned partial : 1;			/* partial (vertical) trace support */
-unsigned partial_zip : 1;		/* partial (vertical) trace support for zip subregions */
-unsigned no_checkpoint : 1;		/* turns off interblock checkpointing */
-unsigned partial_preference : 1;	/* partial preference encountered on some facs */
-
-char initial_value;
-
-char zmode[4];				/* fills in with "wb0".."wb9" */
-unsigned int gzbufpnt;
-unsigned char gzdest[LXT2_WR_GZWRITE_BUFFER + 4];	/* enough for zlib buffering */
-
-char *lxtname;
-off_t break_size;
-off_t break_header_size;
-unsigned int break_number;
-};
-
-
-struct lxt2_wr_symbol
-{
-struct lxt2_wr_symbol *next;
-struct lxt2_wr_symbol *symchain;
-char *name;
-int namlen;
-
-int facnum;
-struct lxt2_wr_symbol *aliased_to;
-
-char *value;	/* fac's actual value */
-
-unsigned int rows;
-int msb, lsb;
-int len;
-int flags;
-
-unsigned partial_preference : 1;	/* in order to shove nets to the first partial group */
-
-unsigned int chgpos;
-granmsk_t msk;				/* must contain LXT2_WR_GRANULE_SIZE bits! */
-unsigned int chg[LXT2_WR_GRANULE_SIZE];
-};
-
-
-#define LXT2_WR_SYM_F_BITS         (0)
-#define LXT2_WR_SYM_F_INTEGER      (1<<0)
-#define LXT2_WR_SYM_F_DOUBLE       (1<<1)
-#define LXT2_WR_SYM_F_STRING       (1<<2)
-#define LXT2_WR_SYM_F_TIME         (LXT2_WR_SYM_F_STRING)      /* user must correctly format this as a string */
-#define LXT2_WR_SYM_F_ALIAS        (1<<3)
-
-#define LXT2_WR_SYM_F_SIGNED       (1<<4)
-#define LXT2_WR_SYM_F_BOOLEAN      (1<<5)
-#define LXT2_WR_SYM_F_NATURAL      ((1<<6)|(LXT2_WR_SYM_F_INTEGER))
-#define LXT2_WR_SYM_F_POSITIVE     ((1<<7)|(LXT2_WR_SYM_F_INTEGER))
-#define LXT2_WR_SYM_F_CHARACTER    (1<<8)
-
-#define LXT2_WR_SYM_F_CONSTANT     (1<<9)
-#define LXT2_WR_SYM_F_VARIABLE     (1<<10)
-#define LXT2_WR_SYM_F_SIGNAL       (1<<11)
-
-#define LXT2_WR_SYM_F_IN           (1<<12)
-#define LXT2_WR_SYM_F_OUT          (1<<13)
-#define LXT2_WR_SYM_F_INOUT        (1<<14)
-
-#define LXT2_WR_SYM_F_WIRE         (1<<15)
-#define LXT2_WR_SYM_F_REG          (1<<16)
-
-
-			/* file I/O */
-struct lxt2_wr_trace *	lxt2_wr_init(const char *name);
-void 			lxt2_wr_flush(struct lxt2_wr_trace *lt);
-void 			lxt2_wr_close(struct lxt2_wr_trace *lt);
-
-			/* for dealing with very large traces, split into multiple files approximately "siz" in length */
-void 			lxt2_wr_set_break_size(struct lxt2_wr_trace *lt, off_t siz);
-
-			/* 0 = no compression, 9 = best compression, 4 = default */
-void			lxt2_wr_set_compression_depth(struct lxt2_wr_trace *lt, unsigned int depth);
-
-			/* default is partial off, turning on makes for faster trace reads, nonzero zipmode causes vertical compression */
-void			lxt2_wr_set_partial_off(struct lxt2_wr_trace *lt);
-void			lxt2_wr_set_partial_on(struct lxt2_wr_trace *lt, int zipmode);
-void			lxt2_wr_set_partial_preference(struct lxt2_wr_trace *lt, const char *name);
-
-			/* turning off checkpointing makes for smaller files */
-void			lxt2_wr_set_checkpoint_off(struct lxt2_wr_trace *lt);
-void			lxt2_wr_set_checkpoint_on(struct lxt2_wr_trace *lt);
-
-			/* facility creation */
-void                    lxt2_wr_set_initial_value(struct lxt2_wr_trace *lt, char value);
-struct lxt2_wr_symbol *	lxt2_wr_symbol_find(struct lxt2_wr_trace *lt, const char *name);
-struct lxt2_wr_symbol *	lxt2_wr_symbol_add(struct lxt2_wr_trace *lt, const char *name, unsigned int rows, int msb, int lsb, int flags);
-struct lxt2_wr_symbol *	lxt2_wr_symbol_alias(struct lxt2_wr_trace *lt, const char *existing_name, const char *alias, int msb, int lsb);
-void			lxt2_wr_symbol_bracket_stripping(struct lxt2_wr_trace *lt, int doit);
-
-			/* each granule is LXT2_WR_GRANULE_SIZE (32 or 64) timesteps, default is 256 per section */
-void 			lxt2_wr_set_maxgranule(struct lxt2_wr_trace *lt, unsigned int maxgranule);
-
-			/* time ops */
-void 			lxt2_wr_set_timescale(struct lxt2_wr_trace *lt, int timescale);
-void 			lxt2_wr_set_timezero(struct lxt2_wr_trace *lt, lxtstime_t timeval);
-int 			lxt2_wr_set_time(struct lxt2_wr_trace *lt, unsigned int timeval);
-int 			lxt2_wr_inc_time_by_delta(struct lxt2_wr_trace *lt, unsigned int timeval);
-int 			lxt2_wr_set_time64(struct lxt2_wr_trace *lt, lxttime_t timeval);
-int 			lxt2_wr_inc_time_by_delta64(struct lxt2_wr_trace *lt, lxttime_t timeval);
-
-                        /* allows blackout regions in LXT files */
-void                    lxt2_wr_set_dumpoff(struct lxt2_wr_trace *lt);
-void                    lxt2_wr_set_dumpon(struct lxt2_wr_trace *lt);
-
-			/* left fill on bit_string uses vcd semantics (left fill with value[0] unless value[0]=='1', then use '0') */
-int 			lxt2_wr_emit_value_int(struct lxt2_wr_trace *lt, struct lxt2_wr_symbol *s, unsigned int row, int value);
-int 			lxt2_wr_emit_value_double(struct lxt2_wr_trace *lt, struct lxt2_wr_symbol *s, unsigned int row, double value);
-int 			lxt2_wr_emit_value_string(struct lxt2_wr_trace *lt, struct lxt2_wr_symbol *s, unsigned int row, char *value);
-int 			lxt2_wr_emit_value_bit_string(struct lxt2_wr_trace *lt, struct lxt2_wr_symbol *s, unsigned int row, char *value);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif

include/gtkwave/lz4.c

@@ -248,7 +248,7 @@ static const int LZ4_minLength = (MFLIMIT+1);
 /**************************************
 *  Common functions
 **************************************/
-static unsigned LZ4_NbCommonBytes (register size_t val)
+static unsigned LZ4_NbCommonBytes (size_t val)
 {
     if (LZ4_isLittleEndian())
     {

include/verilated.mk.in

@@ -2,7 +2,7 @@
 ######################################################################
 # DESCRIPTION: Makefile commands for all verilated target files
 #
-# Copyright 2003-2018 by Wilson Snyder. Verilator is free software; you can
+# Copyright 2003-2019 by Wilson Snyder. Verilator is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU Lesser
 # General Public License Version 3 or the Perl Artistic License Version 2.0.
 ######################################################################
@@ -116,8 +116,22 @@ endif
 
 ifneq ($(VM_THREADS),0)
  ifneq ($(VM_THREADS),)
+  CPPFLAGS += -DVL_THREADED
+  VK_LIBS_THREADED=1
+ endif
+endif
+
+ifneq ($(VM_TRACE_THREADED),0)
+ ifneq ($(VM_TRACE_THREADED),)
+  CPPFLAGS += -DVL_TRACE_THREADED
+  VK_LIBS_THREADED=1
+ endif
+endif
+
+ifneq ($(VK_LIBS_THREADED),0)
+ ifneq ($(VK_LIBS_THREADED),)
   # Need C++11 at least, so always default to newest
-  CPPFLAGS += -DVL_THREADED $(CFG_CXXFLAGS_STD_NEWEST)
+  CPPFLAGS += $(CFG_CXXFLAGS_STD_NEWEST)
   LDLIBS += $(CFG_LDLIBS_THREADS)
  endif
 endif
@@ -167,17 +181,19 @@ $(VM_PREFIX)__ALL.a: $(VK_OBJS)
 ### Compile rules
 
 ifneq ($(VM_DEFAULT_RULES),0)
-$(VM_PREFIX)__ALLsup.o: $(VM_PREFIX)__ALLsup.cpp
-	$(OBJCACHE) $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(OPT_SLOW) -c -o $@ $<
-
 $(VM_PREFIX)__ALLcls.o: $(VM_PREFIX)__ALLcls.cpp
 	$(OBJCACHE) $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(OPT_FAST) -c -o $@ $<
 
-$(VM_PREFIX)%__Slow.o: $(VM_PREFIX)%__Slow.cpp
+$(VM_PREFIX)__ALLsup.o: $(VM_PREFIX)__ALLsup.cpp
 	$(OBJCACHE) $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(OPT_SLOW) -c -o $@ $<
 
-$(VM_PREFIX)%.o: $(VM_PREFIX)%.cpp
+# VM_GLOBAL_FAST files including verilated.o use this rule
+%.o: %.cpp
 	$(OBJCACHE) $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(OPT_FAST) -c -o $@ $<
+
+%__Slow.o: %__Slow.cpp
+	$(OBJCACHE) $(CXX) $(CXXFLAGS) $(CPPFLAGS) $(OPT_SLOW) -c -o $@ $<
+
 endif
 
 #Default rule embedded in make:
@@ -189,7 +205,10 @@ endif
 
 debug-make::
 	@echo
+	@echo CXXFLAGS: $(CXXFLAGS)
 	@echo CPPFLAGS: $(CPPFLAGS)
+	@echo OPT_FAST: $(OPT_FAST)
+	@echo OPT_SLOW: $(OPT_SLOW)
 	@echo VM_PREFIX:  $(VM_PREFIX)
 	@echo VM_PARALLEL_BUILDS:  $(VM_PARALLEL_BUILDS)
 	@echo VM_CLASSES_FAST: $(VM_CLASSES_FAST)

include/verilated.v

@@ -4,7 +4,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -29,4 +29,4 @@
  // Hide file descriptor difference - deprecated - for older versions
  `define verilator_file_descriptor integer
 
-`endif // guard
+`endif  // guard

include/verilated_config.h.in

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.

include/verilated_cov.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -34,8 +34,8 @@
 
 struct VerilatedCovImpBase {
     // TYPES
-    enum { MAX_KEYS = 33 };		/// Maximum user arguments + filename+lineno
-    enum { KEY_UNDEF = 0 };		/// Magic key # for unspecified values
+    enum { MAX_KEYS = 33 };  /// Maximum user arguments + filename+lineno
+    enum { KEY_UNDEF = 0 };  /// Magic key # for unspecified values
 };
 
 //=============================================================================
@@ -45,15 +45,15 @@ struct VerilatedCovImpBase {
 class VerilatedCovImpItem : VerilatedCovImpBase {
 public:  // But only local to this file
     // MEMBERS
-    int	m_keys[MAX_KEYS];		///< Key
-    int	m_vals[MAX_KEYS];		///< Value for specified key
+    int m_keys[MAX_KEYS];  ///< Key
+    int m_vals[MAX_KEYS];  ///< Value for specified key
     // CONSTRUCTORS
     // Derived classes should call zero() in their constructor
     VerilatedCovImpItem() {
-	for (int i=0; i<MAX_KEYS; ++i) {
-	    m_keys[i]=KEY_UNDEF;
-	    m_vals[i]=0;
-	}
+        for (int i=0; i<MAX_KEYS; ++i) {
+            m_keys[i] = KEY_UNDEF;
+            m_vals[i] = 0;
+        }
     }
     virtual ~VerilatedCovImpItem() {}
     virtual vluint64_t count() const = 0;
@@ -69,7 +69,7 @@ public:  // But only local to this file
 template <class T> class VerilatedCoverItemSpec : public VerilatedCovImpItem {
 private:
     // MEMBERS
-    T*	m_countp;	///< Count value
+    T*  m_countp;  ///< Count value
 public:
     // METHODS
     // cppcheck-suppress truncLongCastReturn
@@ -96,7 +96,7 @@ private:
 
 private:
     // MEMBERS
-    VerilatedMutex	m_mutex;  ///< Protects all members, when VL_THREADED. Wrapper deals with setting it.
+    VerilatedMutex      m_mutex;  ///< Protects all members, when VL_THREADED. Wrapper deals with setting it.
     ValueIndexMap       m_valueIndexes VL_GUARDED_BY(m_mutex);  ///< For each key/value a unique arbitrary index value
     IndexValueMap       m_indexValues VL_GUARDED_BY(m_mutex);  ///< For each key/value a unique arbitrary index value
     ItemList            m_items VL_GUARDED_BY(m_mutex);  ///< List of all items
@@ -107,294 +107,296 @@ private:
 
     // CONSTRUCTORS
     VerilatedCovImp() {
-	m_insertp = NULL;
-	m_insertFilenamep = NULL;
-	m_insertLineno = 0;
+        m_insertp = NULL;
+        m_insertFilenamep = NULL;
+        m_insertLineno = 0;
     }
     VL_UNCOPYABLE(VerilatedCovImp);
 public:
     ~VerilatedCovImp() { clearGuts(); }
     static VerilatedCovImp& imp() VL_MT_SAFE {
-	static VerilatedCovImp s_singleton;
-	return s_singleton;
+        static VerilatedCovImp s_singleton;
+        return s_singleton;
     }
 
 private:
     // PRIVATE METHODS
     int valueIndex(const std::string& value) VL_REQUIRES(m_mutex) {
-	static int nextIndex = KEY_UNDEF+1;
-	ValueIndexMap::iterator iter = m_valueIndexes.find(value);
-	if (iter != m_valueIndexes.end()) return iter->second;
-	nextIndex++;  assert(nextIndex>0);
-	m_valueIndexes.insert(std::make_pair(value, nextIndex));
-	m_indexValues.insert(std::make_pair(nextIndex, value));
-	return nextIndex;
+        static int nextIndex = KEY_UNDEF+1;
+        ValueIndexMap::iterator iter = m_valueIndexes.find(value);
+        if (iter != m_valueIndexes.end()) return iter->second;
+        nextIndex++;  assert(nextIndex>0);
+        m_valueIndexes.insert(std::make_pair(value, nextIndex));
+        m_indexValues.insert(std::make_pair(nextIndex, value));
+        return nextIndex;
     }
     static std::string dequote(const std::string& text) VL_PURE {
-	// Quote any special characters
-	std::string rtn;
-	for (const char* pos = text.c_str(); *pos; ++pos) {
-	    if (!isprint(*pos) || *pos=='%' || *pos=='"') {
-		char hex[10]; sprintf(hex,"%%%02X",pos[0]);
-		rtn += hex;
-	    } else {
-		rtn += *pos;
-	    }
-	}
-	return rtn;
+        // Quote any special characters
+        std::string rtn;
+        for (const char* pos = text.c_str(); *pos; ++pos) {
+            if (!isprint(*pos) || *pos=='%' || *pos=='"') {
+                char hex[10]; sprintf(hex, "%%%02X", pos[0]);
+                rtn += hex;
+            } else {
+                rtn += *pos;
+            }
+        }
+        return rtn;
     }
     static bool legalKey(const std::string& key) VL_PURE {
-	// Because we compress long keys to a single letter, and
-	// don't want applications to either get confused if they use
-	// a letter differently, nor want them to rely on our compression...
-	// (Considered using numeric keys, but will remain back compatible.)
-	if (key.length()<2) return false;
-	if (key.length()==2 && isdigit(key[1])) return false;
-	return true;
+        // Because we compress long keys to a single letter, and
+        // don't want applications to either get confused if they use
+        // a letter differently, nor want them to rely on our compression...
+        // (Considered using numeric keys, but will remain back compatible.)
+        if (key.length()<2) return false;
+        if (key.length()==2 && isdigit(key[1])) return false;
+        return true;
     }
     static std::string keyValueFormatter(const std::string& key, const std::string& value) VL_PURE {
-	std::string name;
-	if (key.length()==1 && isalpha(key[0])) {
-	    name += std::string("\001")+key;
-	} else {
-	    name += std::string("\001")+dequote(key);
-	}
-	name += std::string("\002")+dequote(value);
-	return name;
+        std::string name;
+        if (key.length()==1 && isalpha(key[0])) {
+            name += std::string("\001")+key;
+        } else {
+            name += std::string("\001")+dequote(key);
+        }
+        name += std::string("\002")+dequote(value);
+        return name;
     }
     static std::string combineHier(const std::string& old, const std::string& add) VL_PURE {
-	// (foo.a.x, foo.b.x) => foo.*.x
-	// (foo.a.x, foo.b.y) => foo.*
-	// (foo.a.x, foo.b)   => foo.*
-	if (old == add) return add;
+        // (foo.a.x, foo.b.x) => foo.*.x
+        // (foo.a.x, foo.b.y) => foo.*
+        // (foo.a.x, foo.b)   => foo.*
+        if (old == add) return add;
         if (old.empty()) return add;
         if (add.empty()) return old;
 
-	const char* a = old.c_str();
-	const char* b = add.c_str();
+        const char* a = old.c_str();
+        const char* b = add.c_str();
 
-	// Scan forward to first mismatch
-	const char* apre = a;
-	const char* bpre = b;
-	while (*apre == *bpre) { apre++; bpre++; }
+        // Scan forward to first mismatch
+        const char* apre = a;
+        const char* bpre = b;
+        while (*apre == *bpre) { apre++; bpre++; }
 
-	// We used to backup and split on only .'s but it seems better to be verbose
-	// and not assume . is the separator
-	std::string prefix = std::string(a,apre-a);
+        // We used to backup and split on only .'s but it seems better to be verbose
+        // and not assume . is the separator
+        std::string prefix = std::string(a, apre-a);
 
-	// Scan backward to last mismatch
-	const char* apost = a+strlen(a)-1;
-	const char* bpost = b+strlen(b)-1;
-	while (*apost == *bpost
-	       && apost>apre && bpost>bpre) { apost--; bpost--; }
+        // Scan backward to last mismatch
+        const char* apost = a+strlen(a)-1;
+        const char* bpost = b+strlen(b)-1;
+        while (*apost == *bpost
+               && apost>apre && bpost>bpre) { apost--; bpost--; }
 
-	// Forward to . so we have a whole word
-	std::string suffix = *bpost ? std::string(bpost+1) : "";
+        // Forward to . so we have a whole word
+        std::string suffix = *bpost ? std::string(bpost+1) : "";
 
-	std::string out = prefix+"*"+suffix;
+        std::string out = prefix+"*"+suffix;
 
-	//cout << "\nch pre="<<prefix<<"  s="<<suffix<<"\nch a="<<old<<"\nch b="<<add<<"\nch o="<<out<<endl;
-	return out;
+        //cout << "\nch pre="<<prefix<<"  s="<<suffix<<"\nch a="<<old<<"\nch b="<<add<<"\nch o="<<out<<endl;
+        return out;
     }
     bool itemMatchesString(VerilatedCovImpItem* itemp, const std::string& match) VL_REQUIRES(m_mutex) {
-	for (int i=0; i<MAX_KEYS; ++i) {
-	    if (itemp->m_keys[i] != KEY_UNDEF) {
-		// We don't compare keys, only values
-		std::string val = m_indexValues[itemp->m_vals[i]];
-		if (std::string::npos != val.find(match)) {  // Found
-		    return true;
-		}
-	    }
-	}
-	return false;
+        for (int i=0; i<MAX_KEYS; ++i) {
+            if (itemp->m_keys[i] != KEY_UNDEF) {
+                // We don't compare keys, only values
+                std::string val = m_indexValues[itemp->m_vals[i]];
+                if (std::string::npos != val.find(match)) {  // Found
+                    return true;
+                }
+            }
+        }
+        return false;
     }
     static void selftest() VL_MT_SAFE {
-	// Little selftest
-	if (combineHier ("a.b.c","a.b.c")	!="a.b.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("a.b.c","a.b")		!="a.b*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("a.x.c","a.y.c")	!="a.*.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("a.z.z.z.c","a.b.c")	!="a.*.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("z","a")		!="*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("q.a","q.b")		!="q.*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("q.za","q.zb")		!="q.z*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
-	if (combineHier ("1.2.3.a","9.8.7.a")	!="*.a") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        // Little selftest
+        if (combineHier("a.b.c","a.b.c")     !="a.b.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("a.b.c","a.b")       !="a.b*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("a.x.c","a.y.c")     !="a.*.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("a.z.z.z.c","a.b.c") !="a.*.c") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("z","a")             !="*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("q.a","q.b")         !="q.*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("q.za","q.zb")       !="q.z*") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
+        if (combineHier("1.2.3.a","9.8.7.a") !="*.a") VL_FATAL_MT(__FILE__,__LINE__,"","%Error: selftest\n");
     }
     void clearGuts() VL_REQUIRES(m_mutex) {
-	for (ItemList::const_iterator it=m_items.begin(); it!=m_items.end(); ++it) {
-	    VerilatedCovImpItem* itemp = *(it);
-	    delete itemp;
-	}
-	m_items.clear();
-	m_indexValues.clear();
-	m_valueIndexes.clear();
+        for (ItemList::const_iterator it=m_items.begin(); it!=m_items.end(); ++it) {
+            VerilatedCovImpItem* itemp = *(it);
+            delete itemp;
+        }
+        m_items.clear();
+        m_indexValues.clear();
+        m_valueIndexes.clear();
     }
 
 public:
     // PUBLIC METHODS
     void clear() VL_EXCLUDES(m_mutex) {
-	Verilated::quiesce();
-	VerilatedLockGuard lock(m_mutex);
-	clearGuts();
+        Verilated::quiesce();
+        VerilatedLockGuard lock(m_mutex);
+        clearGuts();
     }
     void clearNonMatch(const char* matchp) VL_EXCLUDES(m_mutex) {
-	Verilated::quiesce();
-	VerilatedLockGuard lock(m_mutex);
-	if (matchp && matchp[0]) {
-	    ItemList newlist;
-	    for (ItemList::iterator it=m_items.begin(); it!=m_items.end(); ++it) {
-		VerilatedCovImpItem* itemp = *(it);
-		if (!itemMatchesString(itemp, matchp)) {
-		    delete itemp;
-		} else {
-		    newlist.push_back(itemp);
-		}
-	    }
-	    m_items = newlist;
-	}
+        Verilated::quiesce();
+        VerilatedLockGuard lock(m_mutex);
+        if (matchp && matchp[0]) {
+            ItemList newlist;
+            for (ItemList::iterator it=m_items.begin(); it!=m_items.end(); ++it) {
+                VerilatedCovImpItem* itemp = *(it);
+                if (!itemMatchesString(itemp, matchp)) {
+                    delete itemp;
+                } else {
+                    newlist.push_back(itemp);
+                }
+            }
+            m_items = newlist;
+        }
     }
     void zero() VL_EXCLUDES(m_mutex) {
-	Verilated::quiesce();
-	VerilatedLockGuard lock(m_mutex);
-	for (ItemList::const_iterator it=m_items.begin(); it!=m_items.end(); ++it) {
-	    (*it)->zero();
-	}
+        Verilated::quiesce();
+        VerilatedLockGuard lock(m_mutex);
+        for (ItemList::const_iterator it=m_items.begin(); it!=m_items.end(); ++it) {
+            (*it)->zero();
+        }
     }
 
     // We assume there's always call to i/f/p in that order
     void inserti(VerilatedCovImpItem* itemp) VL_EXCLUDES(m_mutex) {
-	VerilatedLockGuard lock(m_mutex);
-	assert(!m_insertp);
- 	m_insertp = itemp;
+        VerilatedLockGuard lock(m_mutex);
+        assert(!m_insertp);
+        m_insertp = itemp;
     }
     void insertf(const char* filenamep, int lineno) VL_EXCLUDES(m_mutex) {
-	VerilatedLockGuard lock(m_mutex);
-	m_insertFilenamep = filenamep;
-	m_insertLineno = lineno;
+        VerilatedLockGuard lock(m_mutex);
+        m_insertFilenamep = filenamep;
+        m_insertLineno = lineno;
     }
     void insertp(const char* ckeyps[MAX_KEYS],
                  const char* valps[MAX_KEYS]) VL_EXCLUDES(m_mutex) {
-	VerilatedLockGuard lock(m_mutex);
-	assert(m_insertp);
-	// First two key/vals are filename
-	ckeyps[0]="filename";	valps[0]=m_insertFilenamep;
-	std::string linestr = vlCovCvtToStr(m_insertLineno);
-	ckeyps[1]="lineno";	valps[1]=linestr.c_str();
-	// Default page if not specified
-	const char* fnstartp = m_insertFilenamep;
-	while (const char* foundp = strchr(fnstartp,'/')) fnstartp=foundp+1;
-	const char* fnendp = fnstartp;
-	while (*fnendp && *fnendp!='.') fnendp++;
-	std::string page_default = "sp_user/"+std::string(fnstartp,fnendp-fnstartp);
-	ckeyps[2]="page";	valps[2]=page_default.c_str();
+        VerilatedLockGuard lock(m_mutex);
+        assert(m_insertp);
+        // First two key/vals are filename
+        ckeyps[0]="filename";   valps[0]=m_insertFilenamep;
+        std::string linestr = vlCovCvtToStr(m_insertLineno);
+        ckeyps[1]="lineno";     valps[1]=linestr.c_str();
+        // Default page if not specified
+        const char* fnstartp = m_insertFilenamep;
+        while (const char* foundp = strchr(fnstartp,'/')) fnstartp = foundp+1;
+        const char* fnendp = fnstartp;
+        while (*fnendp && *fnendp!='.') fnendp++;
+        std::string page_default = "sp_user/"+std::string(fnstartp, fnendp-fnstartp);
+        ckeyps[2]="page";       valps[2]=page_default.c_str();
 
-	// Keys -> strings
-	std::string keys[MAX_KEYS];
-	for (int i=0; i<MAX_KEYS; ++i) {
-	    if (ckeyps[i] && ckeyps[i][0]) {
-		keys[i] = ckeyps[i];
-	    }
-	}
-	// Ignore empty keys
-	for (int i=0; i<MAX_KEYS; ++i) {
+        // Keys -> strings
+        std::string keys[MAX_KEYS];
+        for (int i=0; i<MAX_KEYS; ++i) {
+            if (ckeyps[i] && ckeyps[i][0]) {
+                keys[i] = ckeyps[i];
+            }
+        }
+        // Ignore empty keys
+        for (int i=0; i<MAX_KEYS; ++i) {
             if (!keys[i].empty()) {
-		for (int j=i+1; j<MAX_KEYS; ++j) {
-		    if (keys[i] == keys[j]) {  // Duplicate key.  Keep the last one
-			keys[i] = "";
-			break;
-		    }
-		}
-	    }
-	}
-	// Insert the values
-	int addKeynum=0;
-	for (int i=0; i<MAX_KEYS; ++i) {
-	    const std::string key = keys[i];
+                for (int j=i+1; j<MAX_KEYS; ++j) {
+                    if (keys[i] == keys[j]) {  // Duplicate key.  Keep the last one
+                        keys[i] = "";
+                        break;
+                    }
+                }
+            }
+        }
+        // Insert the values
+        int addKeynum = 0;
+        for (int i=0; i<MAX_KEYS; ++i) {
+            const std::string key = keys[i];
             if (!keys[i].empty()) {
-		const std::string val = valps[i];
-		//cout<<"   "<<__FUNCTION__<<"  "<<key<<" = "<<val<<endl;
-		m_insertp->m_keys[addKeynum] = valueIndex(key);
-		m_insertp->m_vals[addKeynum] = valueIndex(val);
-		addKeynum++;
-		if (!legalKey(key)) {
-		    std::string msg = "%Error: Coverage keys of one character, or letter+digit are illegal: "+key;
-		    VL_FATAL_MT("",0,"",msg.c_str());
-		}
-	    }
-	}
-	m_items.push_back(m_insertp);
-	// Prepare for next
-	m_insertp = NULL;
+                const std::string val = valps[i];
+                //cout<<"   "<<__FUNCTION__<<"  "<<key<<" = "<<val<<endl;
+                m_insertp->m_keys[addKeynum] = valueIndex(key);
+                m_insertp->m_vals[addKeynum] = valueIndex(val);
+                addKeynum++;
+                if (!legalKey(key)) {
+                    std::string msg
+                        = ("%Error: Coverage keys of one character, or letter+digit are illegal: "
+                           +key);
+                    VL_FATAL_MT("", 0, "", msg.c_str());
+                }
+            }
+        }
+        m_items.push_back(m_insertp);
+        // Prepare for next
+        m_insertp = NULL;
     }
 
     void write(const char* filename) VL_EXCLUDES(m_mutex) {
-	Verilated::quiesce();
-	VerilatedLockGuard lock(m_mutex);
+        Verilated::quiesce();
+        VerilatedLockGuard lock(m_mutex);
 #ifndef VM_COVERAGE
-	VL_FATAL_MT("",0,"","%Error: Called VerilatedCov::write when VM_COVERAGE disabled\n");
+        VL_FATAL_MT("", 0, "", "%Error: Called VerilatedCov::write when VM_COVERAGE disabled\n");
 #endif
-	selftest();
+        selftest();
 
         std::ofstream os(filename);
-	if (os.fail()) {
-	    std::string msg = std::string("%Error: Can't write '")+filename+"'";
-	    VL_FATAL_MT("",0,"",msg.c_str());
-	    return;
-	}
-	os << "# SystemC::Coverage-3\n";
+        if (os.fail()) {
+            std::string msg = std::string("%Error: Can't write '")+filename+"'";
+            VL_FATAL_MT("", 0, "", msg.c_str());
+            return;
+        }
+        os << "# SystemC::Coverage-3\n";
 
-	// Build list of events; totalize if collapsing hierarchy
-	typedef std::map<std::string,std::pair<std::string,vluint64_t> > EventMap;
-	EventMap eventCounts;
-	for (ItemList::iterator it=m_items.begin(); it!=m_items.end(); ++it) {
-	    VerilatedCovImpItem* itemp = *(it);
-	    std::string name;
-	    std::string hier;
-	    bool per_instance = false;
+        // Build list of events; totalize if collapsing hierarchy
+        typedef std::map<std::string,std::pair<std::string,vluint64_t> > EventMap;
+        EventMap eventCounts;
+        for (ItemList::iterator it=m_items.begin(); it!=m_items.end(); ++it) {
+            VerilatedCovImpItem* itemp = *(it);
+            std::string name;
+            std::string hier;
+            bool per_instance = false;
 
-	    for (int i=0; i<MAX_KEYS; ++i) {
-		if (itemp->m_keys[i] != KEY_UNDEF) {
-		    std::string key = VerilatedCovKey::shortKey(m_indexValues[itemp->m_keys[i]]);
-		    std::string val = m_indexValues[itemp->m_vals[i]];
-		    if (key == VL_CIK_PER_INSTANCE) {
-			if (val != "0") per_instance = true;
-		    }
-		    if (key == VL_CIK_HIER) {
-			hier = val;
-		    } else {
-			// Print it
-			name += keyValueFormatter(key,val);
-		    }
-		}
-	    }
-	    if (per_instance) {  // Not collapsing hierarchies
-		name += keyValueFormatter(VL_CIK_HIER,hier);
-		hier = "";
-	    }
+            for (int i=0; i<MAX_KEYS; ++i) {
+                if (itemp->m_keys[i] != KEY_UNDEF) {
+                    std::string key = VerilatedCovKey::shortKey(m_indexValues[itemp->m_keys[i]]);
+                    std::string val = m_indexValues[itemp->m_vals[i]];
+                    if (key == VL_CIK_PER_INSTANCE) {
+                        if (val != "0") per_instance = true;
+                    }
+                    if (key == VL_CIK_HIER) {
+                        hier = val;
+                    } else {
+                        // Print it
+                        name += keyValueFormatter(key, val);
+                    }
+                }
+            }
+            if (per_instance) {  // Not collapsing hierarchies
+                name += keyValueFormatter(VL_CIK_HIER, hier);
+                hier = "";
+            }
 
-	    // Group versus point labels don't matter here, downstream
-	    // deals with it.  Seems bad for sizing though and doesn't
-	    // allow easy addition of new group codes (would be
-	    // inefficient)
+            // Group versus point labels don't matter here, downstream
+            // deals with it.  Seems bad for sizing though and doesn't
+            // allow easy addition of new group codes (would be
+            // inefficient)
 
-	    // Find or insert the named event
-	    EventMap::iterator cit = eventCounts.find(name);
-	    if (cit != eventCounts.end()) {
-		const std::string& oldhier = cit->second.first;
-		cit->second.second += itemp->count();
-		cit->second.first  = combineHier(oldhier, hier);
-	    } else {
-		eventCounts.insert(std::make_pair(name, make_pair(hier,itemp->count())));
-	    }
-	}
+            // Find or insert the named event
+            EventMap::iterator cit = eventCounts.find(name);
+            if (cit != eventCounts.end()) {
+                const std::string& oldhier = cit->second.first;
+                cit->second.second += itemp->count();
+                cit->second.first  = combineHier(oldhier, hier);
+            } else {
+                eventCounts.insert(std::make_pair(name, make_pair(hier, itemp->count())));
+            }
+        }
 
-	// Output body
-	for (EventMap::const_iterator it=eventCounts.begin(); it!=eventCounts.end(); ++it) {
-	    os<<"C '"<<std::dec;
-	    os<<it->first;
-            if (!it->second.first.empty()) os<<keyValueFormatter(VL_CIK_HIER,it->second.first);
-	    os<<"' "<<it->second.second;
-	    os<<std::endl;
-	}
+        // Output body
+        for (EventMap::const_iterator it=eventCounts.begin(); it!=eventCounts.end(); ++it) {
+            os<<"C '"<<std::dec;
+            os<<it->first;
+            if (!it->second.first.empty()) os<<keyValueFormatter(VL_CIK_HIER, it->second.first);
+            os<<"' "<<it->second.second;
+            os<<std::endl;
+        }
     }
 };
 
@@ -420,7 +422,7 @@ void VerilatedCov::_inserti(vluint64_t* itemp) VL_MT_SAFE {
     VerilatedCovImp::imp().inserti(new VerilatedCoverItemSpec<vluint64_t>(itemp));
 }
 void VerilatedCov::_insertf(const char* filename, int lineno) VL_MT_SAFE {
-    VerilatedCovImp::imp().insertf(filename,lineno);
+    VerilatedCovImp::imp().insertf(filename, lineno);
 }
 
 #define K(n) const char* key ## n
@@ -431,12 +433,12 @@ void VerilatedCov::_insertp(A(0),A(1),A(2),A(3),A(4),A(5),A(6),A(7),A(8),A(9),
                             A(10),A(11),A(12),A(13),A(14),A(15),A(16),A(17),A(18),A(19),
                             A(20),A(21),A(22),A(23),A(24),A(25),A(26),A(27),A(28),A(29)) VL_MT_SAFE {
     const char* keyps[VerilatedCovImpBase::MAX_KEYS]
-	= {NULL,NULL,NULL,	// filename,lineno,page
-	   key0,key1,key2,key3,key4,key5,key6,key7,key8,key9,
-	   key10,key11,key12,key13,key14,key15,key16,key17,key18,key19,
-	   key20,key21,key22,key23,key24,key25,key26,key27,key28,key29};
+        = {NULL,NULL,NULL,  // filename,lineno,page
+           key0,key1,key2,key3,key4,key5,key6,key7,key8,key9,
+           key10,key11,key12,key13,key14,key15,key16,key17,key18,key19,
+           key20,key21,key22,key23,key24,key25,key26,key27,key28,key29};
     const char* valps[VerilatedCovImpBase::MAX_KEYS]
-	= {NULL,NULL,NULL,	// filename,lineno,page
+        = {NULL,NULL,NULL,  // filename,lineno,page
            valp0,valp1,valp2,valp3,valp4,valp5,valp6,valp7,valp8,valp9,
            valp10,valp11,valp12,valp13,valp14,valp15,valp16,valp17,valp18,valp19,
            valp20,valp21,valp22,valp23,valp24,valp25,valp26,valp27,valp28,valp29};
@@ -446,14 +448,14 @@ void VerilatedCov::_insertp(A(0),A(1),A(2),A(3),A(4),A(5),A(6),A(7),A(8),A(9),
 // And versions with fewer arguments  (oh for a language with named parameters!)
 void VerilatedCov::_insertp(A(0),A(1),A(2),A(3),A(4),A(5),A(6),A(7),A(8),A(9)) VL_MT_SAFE {
     _insertp(C(0),C(1),C(2),C(3),C(4),C(5),C(6),C(7),C(8),C(9),
-	     N(10),N(11),N(12),N(13),N(14),N(15),N(16),N(17),N(18),N(19),
-	     N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
+             N(10),N(11),N(12),N(13),N(14),N(15),N(16),N(17),N(18),N(19),
+             N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
 }
 void VerilatedCov::_insertp(A(0),A(1),A(2),A(3),A(4),A(5),A(6),A(7),A(8),A(9),
                             A(10),A(11),A(12),A(13),A(14),A(15),A(16),A(17),A(18),A(19)) VL_MT_SAFE {
     _insertp(C(0),C(1),C(2),C(3),C(4),C(5),C(6),C(7),C(8),C(9),
-	     C(10),C(11),C(12),C(13),C(14),C(15),C(16),C(17),C(18),C(19),
-	     N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
+             C(10),C(11),C(12),C(13),C(14),C(15),C(16),C(17),C(18),C(19),
+             N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
 }
 // Backward compatibility for Verilator
 void VerilatedCov::_insertp(A(0), A(1),  K(2),int val2,  K(3),int val3,
@@ -461,10 +463,10 @@ void VerilatedCov::_insertp(A(0), A(1),  K(2),int val2,  K(3),int val3,
     std::string val2str = vlCovCvtToStr(val2);
     std::string val3str = vlCovCvtToStr(val3);
     _insertp(C(0),C(1),
-	     key2,val2str.c_str(),  key3,val3str.c_str(),  key4, val4.c_str(),
-	     C(5),C(6),N(7),N(8),N(9),
-	     N(10),N(11),N(12),N(13),N(14),N(15),N(16),N(17),N(18),N(19),
-	     N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
+             key2,val2str.c_str(),  key3,val3str.c_str(),  key4, val4.c_str(),
+             C(5),C(6),N(7),N(8),N(9),
+             N(10),N(11),N(12),N(13),N(14),N(15),N(16),N(17),N(18),N(19),
+             N(20),N(21),N(22),N(23),N(24),N(25),N(26),N(27),N(28),N(29));
 }
 #undef A
 #undef C

include/verilated_cov.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -44,31 +44,31 @@
 /// The value may be a string, or another type which will be auto-converted to a string.
 ///
 /// Some typical keys:
-///	filename	File the recording occurs in.  Defaults to __FILE__
-///	lineno		Line number the recording occurs in.  Defaults to __LINE__
-///	column		Column number (or occurrence# for dup file/lines).  Defaults to undef.
-///	hier		Hierarchical name.  Defaults to name()
-///	type		Type of coverage.  Defaults to "user"
-///			Other types are 'block', 'fsm', 'toggle'.
-///	comment		Description of the coverage event.  Should be set by the user.
-///			Comments for type==block: 'if', 'else', 'elsif', 'case'
-///	thresh		Threshold to consider fully covered.
-///			If unspecified, downstream tools will determine it.
+///     filename        File the recording occurs in.  Defaults to __FILE__
+///     lineno          Line number the recording occurs in.  Defaults to __LINE__
+///     column          Column number (or occurrence# for dup file/lines).  Defaults to undef.
+///     hier            Hierarchical name.  Defaults to name()
+///     type            Type of coverage.  Defaults to "user"
+///                     Other types are 'block', 'fsm', 'toggle'.
+///     comment         Description of the coverage event.  Should be set by the user.
+///                     Comments for type==block: 'if', 'else', 'elsif', 'case'
+///     thresh          Threshold to consider fully covered.
+///                     If unspecified, downstream tools will determine it.
 ///
 /// Examples:
 ///
-///	vluint32_t m_cases[10];
-///	constructor {
-///	    for (int i=0; i<10; ++i) { m_cases[i]=0; }
+///     vluint32_t m_cases[10];
+///     constructor {
+///         for (int i=0; i<10; ++i) { m_cases[i]=0; }
+///     }
+///     for (int i=0; i<10; ++i) {
+///             VL_COVER_INSERT(&m_cases[i], "comment", "Coverage Case", "i", cvtToNumStr(i));
 ///     }
-///	for (int i=0; i<10; ++i) {
-///		VL_COVER_INSERT(&m_cases[i], "comment", "Coverage Case", "i", cvtToNumStr(i));
-///	}
 
 #define VL_COVER_INSERT(countp,args...) \
-    VL_IF_COVER(VerilatedCov::_inserti(countp);	\
-		VerilatedCov::_insertf(__FILE__,__LINE__);	\
-		VerilatedCov::_insertp("hier", name(), args))
+    VL_IF_COVER(VerilatedCov::_inserti(countp); \
+                VerilatedCov::_insertf(__FILE__,__LINE__);      \
+                VerilatedCov::_insertp("hier", name(), args))
 
 //=============================================================================
 /// Convert VL_COVER_INSERT value arguments to strings
@@ -106,8 +106,8 @@ public:
     // much slower (nearly 2x) than having smaller versions also.  However
     // there's not much more gain in having a version for each number of args.
 #define K(n) const char* key ## n
-#define A(n) const char* key ## n, const char* valp ## n	// Argument list
-#define D(n) const char* key ## n = NULL, const char* valp ## n = NULL	// Argument list
+#define A(n) const char* key ## n, const char* valp ## n  // Argument list
+#define D(n) const char* key ## n = NULL, const char* valp ## n = NULL  // Argument list
     static void _insertp(D(0),D(1),D(2),D(3),D(4),D(5),D(6),D(7),D(8),D(9));
     static void _insertp(A(0),A(1),A(2),A(3),A(4),A(5),A(6),A(7),A(8),A(9)
                          ,A(10),D(11),D(12),D(13),D(14),D(15),D(16),D(17),D(18),D(19));
@@ -129,4 +129,4 @@ public:
     static void zero() VL_MT_SAFE;
 };
 
-#endif // guard
+#endif  // Guard

include/verilated_cov_key.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -140,4 +140,4 @@ public:
     }
 };
 
-#endif // guard
+#endif  // guard

include/verilated_dpi.cpp

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2009-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2009-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -147,7 +147,7 @@ void svPutPartselBit(svBitVecVal* dp, const svBitVecVal s, int lbit, int width)
     else {
         int hword = VL_BITWORD_I(hbit);
         int lword = VL_BITWORD_I(lbit);
-        if (hword==lword) {     // know < 32 bits because above checks it
+        if (hword==lword) {  // know < 32 bits because above checks it
             IData insmask = (VL_MASK_I(hoffset-loffset+1))<<loffset;
             dp[lword] = (dp[lword] & ~insmask) | ((s<<loffset) & insmask);
         } else {
@@ -172,7 +172,7 @@ void svPutPartselLogic(svLogicVecVal* dp, const svLogicVecVal s, int lbit, int w
     else {
         int hword = VL_BITWORD_I(hbit);
         int lword = VL_BITWORD_I(lbit);
-        if (hword==lword) {     // know < 32 bits because above checks it
+        if (hword==lword) {  // know < 32 bits because above checks it
             IData insmask = (VL_MASK_I(hoffset-loffset+1))<<loffset;
             dp[lword].aval = (dp[lword].aval & ~insmask) | ((s.aval<<loffset) & insmask);
             dp[lword].bval = (dp[lword].bval & ~insmask) | ((s.bval<<loffset) & insmask);
@@ -320,7 +320,8 @@ static void _vl_svGetBitArrElemVecVal(svBitVecVal* d, const svOpenArrayHandle s,
         return;
     }
     default:
-        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n", varp->vltype());
+        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n",
+                       varp->vltype());
         return;
     }
 }
@@ -348,7 +349,8 @@ static void _vl_svGetLogicArrElemVecVal(svLogicVecVal* d, const svOpenArrayHandl
         return;
     }
     default:
-        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n", varp->vltype());
+        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n",
+                       varp->vltype());
         return;
     }
 }
@@ -370,7 +372,8 @@ static void _vl_svPutBitArrElemVecVal(const svOpenArrayHandle d, const svBitVecV
         return;
     }
     default:
-        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n", varp->vltype());
+        _VL_SVDPI_WARN("%%Warning: DPI svOpenArrayHandle function unsupported datatype (%d).\n",
+                       varp->vltype());
         return;
     }
 }
@@ -474,7 +477,7 @@ void* svGetArrElemPtr(const svOpenArrayHandle h, int indx1, ...) {
             datap = _vl_svGetArrElemPtr(h, 2, indx1, indx2, 0); break; }
     case 3: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int);
             datap = _vl_svGetArrElemPtr(h, 3, indx1, indx2, indx3); break; }
-    default: datap = _vl_svGetArrElemPtr(h, -1, 0, 0, 0); break; // Will error
+    default: datap = _vl_svGetArrElemPtr(h, -1, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
     return datap;
@@ -500,7 +503,7 @@ void svPutBitArrElemVecVal(const svOpenArrayHandle d, const svBitVecVal* s,
             _vl_svPutBitArrElemVecVal(d, s, 2, indx1, indx2, 0); break; }
     case 3: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int);
             _vl_svPutBitArrElemVecVal(d, s, 3, indx1, indx2, indx3); break; }
-    default: _vl_svPutBitArrElemVecVal(d, s, -1, 0, 0, 0); break; // Will error
+    default: _vl_svPutBitArrElemVecVal(d, s, -1, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -527,7 +530,7 @@ void svPutLogicArrElemVecVal(const svOpenArrayHandle d, const svLogicVecVal* s,
             _vl_svPutLogicArrElemVecVal(d, s, 2, indx1, indx2, 0); break; }
     case 3: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int);
             _vl_svPutLogicArrElemVecVal(d, s, 3, indx1, indx2, indx3); break; }
-    default: _vl_svPutLogicArrElemVecVal(d, s, -1, 0, 0, 0); break; // Will error
+    default: _vl_svPutLogicArrElemVecVal(d, s, -1, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -558,7 +561,7 @@ void svGetBitArrElemVecVal(svBitVecVal* d, const svOpenArrayHandle s,
             _vl_svGetBitArrElemVecVal(d, s, 2, indx1, indx2, 0); break; }
     case 3: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int);
             _vl_svGetBitArrElemVecVal(d, s, 3, indx1, indx2, indx3); break; }
-    default: _vl_svGetBitArrElemVecVal(d, s, -1, 0, 0, 0); break; // Will error
+    default: _vl_svGetBitArrElemVecVal(d, s, -1, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -585,7 +588,7 @@ void svGetLogicArrElemVecVal(svLogicVecVal* d, const svOpenArrayHandle s,
             _vl_svGetLogicArrElemVecVal(d, s, 2, indx1, indx2, 0); break; }
     case 3: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int);
             _vl_svGetLogicArrElemVecVal(d, s, 3, indx1, indx2, indx3); break; }
-    default: _vl_svGetLogicArrElemVecVal(d, s, -1, 0, 0, 0); break; // Will error
+    default: _vl_svGetLogicArrElemVecVal(d, s, -1, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -615,7 +618,7 @@ svBit svGetBitArrElem(const svOpenArrayHandle s, int indx1, ...) {
             out = _vl_svGetBitArrElem(s, 3, indx1, indx2, indx3, 0); break; }
     case 4: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int); int indx4=va_arg(ap,int);
             out = _vl_svGetBitArrElem(s, 4, indx1, indx2, indx3, indx4); break; }
-    default: out = _vl_svGetBitArrElem(s, -1, 0, 0, 0, 0); break; // Will error
+    default: out = _vl_svGetBitArrElem(s, -1, 0, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
     return out;
@@ -643,7 +646,7 @@ svLogic svGetLogicArrElem(const svOpenArrayHandle s, int indx1, ...) {
             out = _vl_svGetBitArrElem(s, 3, indx1, indx2, indx3, 0); break; }
     case 4: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int); int indx4=va_arg(ap,int);
             out = _vl_svGetBitArrElem(s, 4, indx1, indx2, indx3, indx4); break; }
-    default: out = _vl_svGetBitArrElem(s, -1, 0, 0, 0, 0); break; // Will error
+    default: out = _vl_svGetBitArrElem(s, -1, 0, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
     return out;
@@ -673,7 +676,7 @@ void svPutBitArrElem(const svOpenArrayHandle d, svBit value, int indx1, ...) {
             _vl_svPutBitArrElem(d, value, 3, indx1, indx2, indx3, 0); break; }
     case 4: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int); int indx4=va_arg(ap,int);
             _vl_svPutBitArrElem(d, value, 4, indx1, indx2, indx3, indx4); break; }
-    default: _vl_svPutBitArrElem(d, value, -1, 0, 0, 0, 0); break; // Will error
+    default: _vl_svPutBitArrElem(d, value, -1, 0, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -699,7 +702,7 @@ void svPutLogicArrElem(const svOpenArrayHandle d, svLogic value, int indx1, ...)
             _vl_svPutBitArrElem(d, value, 3, indx1, indx2, indx3, 0); break; }
     case 4: { int indx2=va_arg(ap,int); int indx3=va_arg(ap,int); int indx4=va_arg(ap,int);
             _vl_svPutBitArrElem(d, value, 4, indx1, indx2, indx3, indx4); break; }
-    default: _vl_svPutBitArrElem(d, value, -1, 0, 0, 0, 0); break; // Will error
+    default: _vl_svPutBitArrElem(d, value, -1, 0, 0, 0, 0); break;  // Will error
     }
     va_end(ap);
 }
@@ -707,11 +710,13 @@ void svPutLogicArrElem1(const svOpenArrayHandle d, svLogic value, int indx1) {
     // Verilator doesn't support X/Z so can just call Bit version
     svPutBitArrElem1(d, value, indx1);
 }
-void svPutLogicArrElem2(const svOpenArrayHandle d, svLogic value, int indx1, int indx2) {
+void svPutLogicArrElem2(const svOpenArrayHandle d, svLogic value,
+                        int indx1, int indx2) {
     // Verilator doesn't support X/Z so can just call Bit version
     svPutBitArrElem2(d, value, indx1, indx2);
 }
-void svPutLogicArrElem3(const svOpenArrayHandle d, svLogic value, int indx1, int indx2, int indx3) {
+void svPutLogicArrElem3(const svOpenArrayHandle d, svLogic value,
+                        int indx1, int indx2, int indx3) {
     // Verilator doesn't support X/Z so can just call Bit version
     svPutBitArrElem3(d, value, indx1, indx2, indx3);
 }
@@ -763,7 +768,7 @@ int svGetCallerInfo(const char** fileNamepp, int *lineNumberp) {
 // Disables
 
 int svIsDisabledState() {
-    return 0; // Disables not implemented
+    return 0;  // Disables not implemented
 }
 
 void svAckDisabledState() {

include/verilated_dpi.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -26,7 +26,7 @@
 
 
 #ifndef _VERILATED_DPI_H_
-#define _VERILATED_DPI_H_ 1 ///< Header Guard
+#define _VERILATED_DPI_H_ 1  ///< Header Guard
 
 #include "verilatedos.h"
 #include "verilated.h"  // Also presumably included by caller
@@ -80,4 +80,4 @@ static inline void VL_SET_SVLV_Q(int, svLogicVecVal* owp, QData ld) VL_MT_SAFE {
 
 //======================================================================
 
-#endif // _VERILATED_DPI_H_
+#endif  // Guard

include/verilated_fst_c.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -24,6 +24,12 @@
 #include "verilated.h"
 #include "verilated_fst_c.h"
 
+// GTKWave configuration
+#ifdef VL_TRACE_THREADED
+# define HAVE_LIBPTHREAD
+# define FST_WRITER_PARALLEL
+#endif
+
 // Include the GTKWave implementation directly
 #include "gtkwave/fastlz.c"
 #include "gtkwave/fstapi.c"
@@ -57,7 +63,7 @@ protected:
     VerilatedFstCallInfo(VerilatedFstCallback_t icb, VerilatedFstCallback_t fcb,
                          VerilatedFstCallback_t changecb,
                          void* ut, vluint32_t code)
-        : m_initcb(icb), m_fullcb(fcb), m_changecb(changecb), m_userthis(ut), m_code(code) {};
+        : m_initcb(icb), m_fullcb(fcb), m_changecb(changecb), m_userthis(ut), m_code(code) {}
     ~VerilatedFstCallInfo() {}
 };
 
@@ -72,6 +78,10 @@ VerilatedFst::VerilatedFst(void* fst)
 void VerilatedFst::open(const char* filename) VL_MT_UNSAFE {
     m_assertOne.check();
     m_fst = fstWriterCreate(filename, 1);
+    fstWriterSetPackType(m_fst, FST_WR_PT_LZ4);
+#ifdef VL_TRACE_THREADED
+    fstWriterSetParallelMode(m_fst, 1);
+#endif
     m_curScope.clear();
 
     for (vluint32_t ent = 0; ent< m_callbacks.size(); ++ent) {
@@ -164,7 +174,8 @@ void VerilatedFst::addCallback(
     VerilatedFstCallback_t changecb, void* userthis) VL_MT_UNSAFE_ONE {
     m_assertOne.check();
     if (VL_UNLIKELY(isOpen())) {
-        std::string msg = std::string("Internal: ")+__FILE__+"::"+__FUNCTION__+" called with already open file";
+        std::string msg = (std::string("Internal: ")+__FILE__+"::"+__FUNCTION__
+                           +" called with already open file");
         VL_FATAL_MT(__FILE__,__LINE__,"",msg.c_str());
     }
     VerilatedFstCallInfo* vci = new VerilatedFstCallInfo(initcb, fullcb, changecb, userthis, 1);
@@ -220,16 +231,16 @@ char* VerilatedFst::array2Str(const vluint32_t* newval, int bits) {
     int bq = bits/32, br = bits%32;
     m_valueStrBuffer.resize(bits+1);
     char* s = m_valueStrBuffer.data();
+    for (int i = 0; i < br; ++i) {
+        *s = '0' + ((newval[bq]>>(br-i-1))&1);
+        ++s;
+    }
     for (int w = bq-1; w >= 0; --w) {
         for (int i = 0; i < 32; ++i) {
             *s = '0' + ((newval[w]>>(32-i-1))&1);
             ++s;
         }
     }
-    for (int i = 0; i < br; ++i) {
-        *s = '0' + ((newval[bq]>>(br-i-1))&1);
-        ++s;
-    }
     *s = '\0';
     return m_valueStrBuffer.data();
 }

include/verilated_fst_c.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -77,11 +77,11 @@ public:
         fstWriterClose(m_fst);
         m_fst = NULL;
     }
-    // void set_time_unit(const char* unitp);  ///< Set time units (s/ms, defaults to ns)
-    // void set_time_unit(const std::string& unit) { set_time_unit(unit.c_str()); }
+    void set_time_unit(const char* unitp) { fstWriterSetTimescaleFromString(m_fst, unitp); }
+    void set_time_unit(const std::string& unit) { set_time_unit(unit.c_str()); }
 
-    // void set_time_resolution(const char* unitp);  ///< Set time resolution (s/ms, defaults to ns)
-    // void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
+    void set_time_resolution(const char* unitp) { if (unitp) {} }
+    void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
 
     // double timescaleToDouble(const char* unitp);
     // std::string doubleToTimescale(double value);
@@ -157,12 +157,18 @@ public:
         fstWriterEmitValueChange(m_fst, m_code2symbol[code], array2Str(newval, bits));
     }
 
-    void fullBit(vluint32_t code, const vluint32_t newval) { chgBit(code, newval); }
-    void fullBus(vluint32_t code, const vluint32_t newval, int bits) { chgBus(code, newval, bits); }
-    void fullDouble(vluint32_t code, const double newval) { chgDouble(code, newval); }
-    void fullFloat(vluint32_t code, const float newval) { chgFloat(code, newval); }
-    void fullQuad(vluint32_t code, const vluint64_t newval, int bits) { chgQuad(code, newval, bits); }
-    void fullArray(vluint32_t code, const vluint32_t* newval, int bits) { chgArray(code, newval, bits); }
+    void fullBit(vluint32_t code, const vluint32_t newval) {
+        chgBit(code, newval); }
+    void fullBus(vluint32_t code, const vluint32_t newval, int bits) {
+        chgBus(code, newval, bits); }
+    void fullDouble(vluint32_t code, const double newval) {
+        chgDouble(code, newval); }
+    void fullFloat(vluint32_t code, const float newval) {
+        chgFloat(code, newval); }
+    void fullQuad(vluint32_t code, const vluint64_t newval, int bits) {
+        chgQuad(code, newval, bits); }
+    void fullArray(vluint32_t code, const vluint32_t* newval, int bits) {
+        chgArray(code, newval, bits); }
 
     void declTriBit   (vluint32_t code, const char* name, int arraynum);
     void declTriBus   (vluint32_t code, const char* name, int arraynum, int msb, int lsb);
@@ -216,11 +222,11 @@ public:
     void dump(int timestamp) { dump(static_cast<vluint64_t>(timestamp)); }
     /// Set time units (s/ms, defaults to ns)
     /// See also VL_TIME_PRECISION, and VL_TIME_MULTIPLIER in verilated.h
-    void set_time_unit(const char* unit) { /* TODO */ }
+    void set_time_unit(const char* unitp) { m_sptrace.set_time_unit(unitp); }
     void set_time_unit(const std::string& unit) { set_time_unit(unit.c_str()); }
     /// Set time resolution (s/ms, defaults to ns)
     /// See also VL_TIME_PRECISION, and VL_TIME_MULTIPLIER in verilated.h
-    void set_time_resolution(const char* unit) { /* TODO */ }
+    void set_time_resolution(const char* unitp) { m_sptrace.set_time_resolution(unitp); }
     void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
 
     /// Internal class access

include/verilated_heavy.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2010-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2010-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -27,7 +27,7 @@
 
 
 #ifndef _VERILATED_HEAVY_H_
-#define _VERILATED_HEAVY_H_ 1 ///< Header Guard
+#define _VERILATED_HEAVY_H_ 1  ///< Header Guard
 
 #include "verilated.h"
 
@@ -70,8 +70,10 @@ extern void VL_READMEM_N(bool hex, int width, int depth, int array_lsb,
 extern void VL_WRITEMEM_N(bool hex, int width, int depth, int array_lsb,
                           const std::string& filename,
                           const void* memp, IData start, IData end) VL_MT_SAFE;
-extern IData VL_SSCANF_INX(int lbits, const std::string& ld, const char* formatp, ...) VL_MT_SAFE;
-extern void VL_SFORMAT_X(int obits_ignored, std::string& output, const char* formatp, ...) VL_MT_SAFE;
+extern IData VL_SSCANF_INX(int lbits, const std::string& ld,
+                           const char* formatp, ...) VL_MT_SAFE;
+extern void VL_SFORMAT_X(int obits_ignored, std::string& output,
+                         const char* formatp, ...) VL_MT_SAFE;
 extern std::string VL_SFORMATF_NX(const char* formatp, ...) VL_MT_SAFE;
 extern IData VL_VALUEPLUSARGS_INW(int rbits, const std::string& ld, WDataOutP rwp) VL_MT_SAFE;
 inline IData VL_VALUEPLUSARGS_INI(int rbits, const std::string& ld, IData& rdr) VL_MT_SAFE {
@@ -88,4 +90,4 @@ inline IData VL_VALUEPLUSARGS_INQ(int rbits, const std::string& ld, QData& rdr)
 }
 extern IData VL_VALUEPLUSARGS_INN(int, const std::string& ld, std::string& rdr) VL_MT_SAFE;
 
-#endif // Guard
+#endif  // Guard

include/verilated_imp.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2009-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2009-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -22,7 +22,7 @@
 
 
 #ifndef _VERILATED_IMP_H_
-#define _VERILATED_IMP_H_ 1 ///< Header Guard
+#define _VERILATED_IMP_H_ 1  ///< Header Guard
 
 #if !defined(_VERILATED_CPP_) && !defined(_VERILATED_DPI_CPP_)
 # error "verilated_imp.h only to be included by verilated*.cpp internals"
@@ -57,8 +57,8 @@ public:
     };
 private:
     // MEMBERS
-    vluint32_t          m_mtaskId;      ///< MTask that did enqueue
-    std::function<void()> m_cb; 	///< Lambda to execute when message received
+    vluint32_t m_mtaskId;  ///< MTask that did enqueue
+    std::function<void()> m_cb;  ///< Lambda to execute when message received
 public:
     // CONSTRUCTORS
     VerilatedMsg(const std::function<void()>& cb)
@@ -92,32 +92,32 @@ public:
     // METHODS
     //// Add message to queue (called by producer)
     void post(const VerilatedMsg& msg) VL_EXCLUDES(m_mutex) {
-	VerilatedLockGuard lock(m_mutex);
-	m_queue.insert(msg);  // Pass by value to copy the message into queue
-	++m_depth;
+        VerilatedLockGuard lock(m_mutex);
+        m_queue.insert(msg);  // Pass by value to copy the message into queue
+        ++m_depth;
     }
     /// Service queue until completion (called by consumer)
     void process() VL_EXCLUDES(m_mutex) {
-	// Tracking m_depth is redundant to e.g. getting the mutex and looking at queue size,
-	// but on the reader side it's 4x faster to test an atomic then getting a mutex
-	while (m_depth) {
-	    // Wait for a message to be added to the queue
-	    // We don't use unique_lock as want to unlock with the message copy still in scope
-	    m_mutex.lock();
-	    assert(!m_queue.empty()); // Otherwise m_depth is wrong
-	    // Unfortunately to release the lock we need to copy the message
-	    // (Or have the message be a pointer, but then new/delete cost on each message)
-	    // We assume messages are small, so copy
-	    auto it = m_queue.begin();
-	    const VerilatedMsg msg = *(it);
-	    m_queue.erase(it);
-	    m_mutex.unlock();
-	    m_depth--;  // Ok if outside critical section as only this code checks the value
-	    {
+        // Tracking m_depth is redundant to e.g. getting the mutex and looking at queue size,
+        // but on the reader side it's 4x faster to test an atomic then getting a mutex
+        while (m_depth) {
+            // Wait for a message to be added to the queue
+            // We don't use unique_lock as want to unlock with the message copy still in scope
+            m_mutex.lock();
+            assert(!m_queue.empty());  // Otherwise m_depth is wrong
+            // Unfortunately to release the lock we need to copy the message
+            // (Or have the message be a pointer, but then new/delete cost on each message)
+            // We assume messages are small, so copy
+            auto it = m_queue.begin();
+            const VerilatedMsg msg = *(it);
+            m_queue.erase(it);
+            m_mutex.unlock();
+            m_depth--;  // Ok if outside critical section as only this code checks the value
+            {
                 VL_DEBUG_IF(VL_DBG_MSGF("Executing callback from mtaskId=%d\n", msg.mtaskId()););
                 msg.run();
-	    }
-	}
+            }
+        }
     }
 };
 
@@ -128,15 +128,15 @@ public:
     // CONSTRUCTORS
     VerilatedThreadMsgQueue() { }
     ~VerilatedThreadMsgQueue() {
-	// The only call of this with a non-empty queue is a fatal error.
-	// So this does not flush the queue, as the destination queue is not known to this class.
+        // The only call of this with a non-empty queue is a fatal error.
+        // So this does not flush the queue, as the destination queue is not known to this class.
     }
 private:
     VL_UNCOPYABLE(VerilatedThreadMsgQueue);
     // METHODS
     static VerilatedThreadMsgQueue& threadton() {
-	static VL_THREAD_LOCAL VerilatedThreadMsgQueue t_s;
-	return t_s;
+        static VL_THREAD_LOCAL VerilatedThreadMsgQueue t_s;
+        return t_s;
     }
 public:
     /// Add message to queue, called by producer
@@ -153,14 +153,14 @@ public:
     }
     /// Push all messages to the eval's queue
     static void flush(VerilatedEvalMsgQueue* evalMsgQp) VL_MT_SAFE {
-	while (!threadton().m_queue.empty()) {
-	    evalMsgQp->post(threadton().m_queue.front());
-	    threadton().m_queue.pop();
-	    Verilated::endOfEvalReqdDec();
-	}
+        while (!threadton().m_queue.empty()) {
+            evalMsgQp->post(threadton().m_queue.front());
+            threadton().m_queue.pop();
+            Verilated::endOfEvalReqdDec();
+        }
     }
 };
-#endif // VL_THREADED
+#endif  // VL_THREADED
 
 //======================================================================
 // VerilatedImp
@@ -174,7 +174,7 @@ class VerilatedImp {
     typedef std::map<const char*, int, VerilatedCStrCmp>  ExportNameMap;
 
     // MEMBERS
-    static VerilatedImp	s_s;		///< Static Singleton; One and only static this
+    static VerilatedImp s_s;  ///< Static Singleton; One and only static this
 
     // Nothing here is save-restored; users expected to re-register appropriately
 
@@ -197,14 +197,14 @@ class VerilatedImp {
     std::vector<FILE*>  m_fdps VL_GUARDED_BY(m_fdMutex);  ///< File descriptors
     std::deque<IData>   m_fdFree VL_GUARDED_BY(m_fdMutex);  ///< List of free descriptors (SLOW - FOPEN/CLOSE only)
 
-public: // But only for verilated*.cpp
+public:  // But only for verilated*.cpp
     // CONSTRUCTORS
     VerilatedImp()
-	: m_argVecLoaded(false), m_exportNext(0) {
-	m_fdps.resize(3);
-	m_fdps[0] = stdin;
-	m_fdps[1] = stdout;
-	m_fdps[2] = stderr;
+        : m_argVecLoaded(false), m_exportNext(0) {
+        m_fdps.resize(3);
+        m_fdps[0] = stdin;
+        m_fdps[1] = stdout;
+        m_fdps[2] = stderr;
     }
     ~VerilatedImp() {}
 private:
@@ -219,21 +219,21 @@ public:
     static void commandArgs(int argc, const char** argv) VL_EXCLUDES(s_s.m_argMutex);
     static void commandArgsAdd(int argc, const char** argv) VL_EXCLUDES(s_s.m_argMutex);
     static std::string argPlusMatch(const char* prefixp) VL_EXCLUDES(s_s.m_argMutex) {
-	VerilatedLockGuard lock(s_s.m_argMutex);
-	// Note prefixp does not include the leading "+"
-	size_t len = strlen(prefixp);
-	if (VL_UNLIKELY(!s_s.m_argVecLoaded)) {
-	    s_s.m_argVecLoaded = true;  // Complain only once
-	    VL_FATAL_MT("unknown",0,"",
-			"%Error: Verilog called $test$plusargs or $value$plusargs without"
-			" testbench C first calling Verilated::commandArgs(argc,argv).");
-	}
-	for (ArgVec::const_iterator it=s_s.m_argVec.begin(); it!=s_s.m_argVec.end(); ++it) {
-	    if ((*it)[0]=='+') {
-		if (0==strncmp(prefixp, it->c_str()+1, len)) return *it;
-	    }
-	}
-	return "";
+        VerilatedLockGuard lock(s_s.m_argMutex);
+        // Note prefixp does not include the leading "+"
+        size_t len = strlen(prefixp);
+        if (VL_UNLIKELY(!s_s.m_argVecLoaded)) {
+            s_s.m_argVecLoaded = true;  // Complain only once
+            VL_FATAL_MT("unknown", 0, "",
+                        "%Error: Verilog called $test$plusargs or $value$plusargs without"
+                        " testbench C first calling Verilated::commandArgs(argc,argv).");
+        }
+        for (ArgVec::const_iterator it=s_s.m_argVec.begin(); it!=s_s.m_argVec.end(); ++it) {
+            if ((*it)[0]=='+') {
+                if (0==strncmp(prefixp, it->c_str()+1, len)) return *it;
+            }
+        }
+        return "";
     }
 private:
     static void commandArgsAddGuts(int argc, const char** argv) VL_REQUIRES(s_s.m_argMutex);
@@ -247,79 +247,81 @@ public:
     // There's often many more scopes than userdata's and thus having a ~48byte
     // per map overhead * N scopes would take much more space and cache thrashing.
     static inline void userInsert(const void* scopep, void* userKey, void* userData) VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_userMapMutex);
-	UserMap::iterator it=s_s.m_userMap.find(std::make_pair(scopep,userKey));
-	if (it != s_s.m_userMap.end()) it->second = userData;
-	// When we support VL_THREADs, we need a lock around this insert, as it's runtime
-	else s_s.m_userMap.insert(it, std::make_pair(std::make_pair(scopep,userKey),userData));
+        VerilatedLockGuard lock(s_s.m_userMapMutex);
+        UserMap::iterator it=s_s.m_userMap.find(std::make_pair(scopep, userKey));
+        if (it != s_s.m_userMap.end()) it->second = userData;
+        // When we support VL_THREADs, we need a lock around this insert, as it's runtime
+        else s_s.m_userMap.insert(it, std::make_pair(std::make_pair(scopep, userKey), userData));
     }
     static inline void* userFind(const void* scopep, void* userKey) VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_userMapMutex);
-	UserMap::const_iterator it=s_s.m_userMap.find(std::make_pair(scopep,userKey));
-	if (VL_LIKELY(it != s_s.m_userMap.end())) return it->second;
-	else return NULL;
+        VerilatedLockGuard lock(s_s.m_userMapMutex);
+        UserMap::const_iterator it=s_s.m_userMap.find(std::make_pair(scopep, userKey));
+        if (VL_LIKELY(it != s_s.m_userMap.end())) return it->second;
+        else return NULL;
     }
 private:
     /// Symbol table destruction cleans up the entries for each scope.
     static void userEraseScope(const VerilatedScope* scopep) VL_MT_SAFE {
-	// Slow ok - called once/scope on destruction, so we simply iterate.
-	VerilatedLockGuard lock(s_s.m_userMapMutex);
-	for (UserMap::iterator it=s_s.m_userMap.begin(); it!=s_s.m_userMap.end(); ) {
-	    if (it->first.first == scopep) {
-		s_s.m_userMap.erase(it++);
-	    } else {
-		++it;
-	    }
-	}
+        // Slow ok - called once/scope on destruction, so we simply iterate.
+        VerilatedLockGuard lock(s_s.m_userMapMutex);
+        for (UserMap::iterator it=s_s.m_userMap.begin(); it!=s_s.m_userMap.end(); ) {
+            if (it->first.first == scopep) {
+                s_s.m_userMap.erase(it++);
+            } else {
+                ++it;
+            }
+        }
     }
     static void userDump() VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_userMapMutex);  // Avoid it changing in middle of dump
-	bool first = true;
-	for (UserMap::const_iterator it=s_s.m_userMap.begin(); it!=s_s.m_userMap.end(); ++it) {
-	    if (first) { VL_PRINTF_MT("  userDump:\n"); first=false; }
-	    VL_PRINTF_MT("    DPI_USER_DATA scope %p key %p: %p\n",
-		      it->first.first, it->first.second, it->second);
-	}
+        VerilatedLockGuard lock(s_s.m_userMapMutex);  // Avoid it changing in middle of dump
+        bool first = true;
+        for (UserMap::const_iterator it=s_s.m_userMap.begin(); it!=s_s.m_userMap.end(); ++it) {
+            if (first) { VL_PRINTF_MT("  userDump:\n"); first=false; }
+            VL_PRINTF_MT("    DPI_USER_DATA scope %p key %p: %p\n",
+                      it->first.first, it->first.second, it->second);
+        }
     }
 
-public: // But only for verilated*.cpp
+public:  // But only for verilated*.cpp
     // METHODS - scope name
     static void scopeInsert(const VerilatedScope* scopep) VL_MT_SAFE {
-	// Slow ok - called once/scope at construction
-	VerilatedLockGuard lock(s_s.m_nameMutex);
-	VerilatedScopeNameMap::iterator it=s_s.m_nameMap.find(scopep->name());
-	if (it == s_s.m_nameMap.end()) {
-	    s_s.m_nameMap.insert(it, std::make_pair(scopep->name(),scopep));
-	}
+        // Slow ok - called once/scope at construction
+        VerilatedLockGuard lock(s_s.m_nameMutex);
+        VerilatedScopeNameMap::iterator it=s_s.m_nameMap.find(scopep->name());
+        if (it == s_s.m_nameMap.end()) {
+            s_s.m_nameMap.insert(it, std::make_pair(scopep->name(), scopep));
+        }
     }
     static inline const VerilatedScope* scopeFind(const char* namep) VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_nameMutex);  // If too slow, can assume this is only VL_MT_SAFE_POSINIT
-	VerilatedScopeNameMap::const_iterator it=s_s.m_nameMap.find(namep);
-	if (VL_LIKELY(it != s_s.m_nameMap.end())) return it->second;
-	else return NULL;
+        VerilatedLockGuard lock(s_s.m_nameMutex);
+        // If too slow, can assume this is only VL_MT_SAFE_POSINIT
+        VerilatedScopeNameMap::const_iterator it=s_s.m_nameMap.find(namep);
+        if (VL_LIKELY(it != s_s.m_nameMap.end())) return it->second;
+        else return NULL;
     }
     static void scopeErase(const VerilatedScope* scopep) VL_MT_SAFE {
-	// Slow ok - called once/scope at destruction
-	VerilatedLockGuard lock(s_s.m_nameMutex);
-	userEraseScope(scopep);
-	VerilatedScopeNameMap::iterator it=s_s.m_nameMap.find(scopep->name());
-	if (it != s_s.m_nameMap.end()) s_s.m_nameMap.erase(it);
+        // Slow ok - called once/scope at destruction
+        VerilatedLockGuard lock(s_s.m_nameMutex);
+        userEraseScope(scopep);
+        VerilatedScopeNameMap::iterator it=s_s.m_nameMap.find(scopep->name());
+        if (it != s_s.m_nameMap.end()) s_s.m_nameMap.erase(it);
     }
     static void scopesDump() VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_nameMutex);
-	VL_PRINTF_MT("  scopesDump:\n");
-	for (VerilatedScopeNameMap::const_iterator it=s_s.m_nameMap.begin(); it!=s_s.m_nameMap.end(); ++it) {
-	    const VerilatedScope* scopep = it->second;
-	    scopep->scopeDump();
-	}
-	VL_PRINTF_MT("\n");
+        VerilatedLockGuard lock(s_s.m_nameMutex);
+        VL_PRINTF_MT("  scopesDump:\n");
+        for (VerilatedScopeNameMap::const_iterator it=s_s.m_nameMap.begin();
+             it!=s_s.m_nameMap.end(); ++it) {
+            const VerilatedScope* scopep = it->second;
+            scopep->scopeDump();
+        }
+        VL_PRINTF_MT("\n");
     }
     static const VerilatedScopeNameMap* scopeNameMap() VL_MT_SAFE_POSTINIT {
-	// Thread save only assuming this is called only after model construction completed
+        // Thread save only assuming this is called only after model construction completed
         return &s_s.m_nameMap;
     }
 
-public: // But only for verilated*.cpp
+public:  // But only for verilated*.cpp
     // METHODS - export names
 
     // Each function prototype is converted to a function number which we
@@ -329,73 +331,75 @@ public: // But only for verilated*.cpp
     // Rather than a 2D map, the integer scheme saves 500ish ns on a likely
     // miss at the cost of a multiply, and all lookups move to slowpath.
     static int exportInsert(const char* namep) VL_MT_SAFE {
-	// Slow ok - called once/function at creation
-	VerilatedLockGuard lock(s_s.m_exportMutex);
-	ExportNameMap::iterator it=s_s.m_exportMap.find(namep);
-	if (it == s_s.m_exportMap.end()) {
-	    s_s.m_exportMap.insert(it, std::make_pair(namep, s_s.m_exportNext++));
-	    return s_s.m_exportNext++;
-	} else {
-	    return it->second;
-	}
+        // Slow ok - called once/function at creation
+        VerilatedLockGuard lock(s_s.m_exportMutex);
+        ExportNameMap::iterator it=s_s.m_exportMap.find(namep);
+        if (it == s_s.m_exportMap.end()) {
+            s_s.m_exportMap.insert(it, std::make_pair(namep, s_s.m_exportNext++));
+            return s_s.m_exportNext++;
+        } else {
+            return it->second;
+        }
     }
     static int exportFind(const char* namep) VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_exportMutex);
-	ExportNameMap::const_iterator it=s_s.m_exportMap.find(namep);
-	if (VL_LIKELY(it != s_s.m_exportMap.end())) return it->second;
-	std::string msg = (std::string("%Error: Testbench C called ")+namep
-			   +" but no such DPI export function name exists in ANY model");
-	VL_FATAL_MT("unknown",0,"", msg.c_str());
-	return -1;
+        VerilatedLockGuard lock(s_s.m_exportMutex);
+        ExportNameMap::const_iterator it=s_s.m_exportMap.find(namep);
+        if (VL_LIKELY(it != s_s.m_exportMap.end())) return it->second;
+        std::string msg = (std::string("%Error: Testbench C called ")+namep
+                           +" but no such DPI export function name exists in ANY model");
+        VL_FATAL_MT("unknown", 0, "", msg.c_str());
+        return -1;
     }
     static const char* exportName(int funcnum) VL_MT_SAFE {
-	// Slowpath; find name for given export; errors only so no map to reverse-map it
-	VerilatedLockGuard lock(s_s.m_exportMutex);
-	for (ExportNameMap::const_iterator it=s_s.m_exportMap.begin(); it!=s_s.m_exportMap.end(); ++it) {
-	    if (it->second == funcnum) return it->first;
-	}
-	return "*UNKNOWN*";
+        // Slowpath; find name for given export; errors only so no map to reverse-map it
+        VerilatedLockGuard lock(s_s.m_exportMutex);
+        for (ExportNameMap::const_iterator it=s_s.m_exportMap.begin();
+             it!=s_s.m_exportMap.end(); ++it) {
+            if (it->second == funcnum) return it->first;
+        }
+        return "*UNKNOWN*";
     }
     static void exportsDump() VL_MT_SAFE {
-	VerilatedLockGuard lock(s_s.m_exportMutex);
-	bool first = true;
-	for (ExportNameMap::const_iterator it=s_s.m_exportMap.begin(); it!=s_s.m_exportMap.end(); ++it) {
-	    if (first) { VL_PRINTF_MT("  exportDump:\n"); first=false; }
-	    VL_PRINTF_MT("    DPI_EXPORT_NAME %05d: %s\n", it->second, it->first);
-	}
+        VerilatedLockGuard lock(s_s.m_exportMutex);
+        bool first = true;
+        for (ExportNameMap::const_iterator it=s_s.m_exportMap.begin();
+             it!=s_s.m_exportMap.end(); ++it) {
+            if (first) { VL_PRINTF_MT("  exportDump:\n"); first=false; }
+            VL_PRINTF_MT("    DPI_EXPORT_NAME %05d: %s\n", it->second, it->first);
+        }
     }
     // We don't free up m_exportMap until the end, because we can't be sure
     // what other models are using the assigned funcnum's.
 
-public: // But only for verilated*.cpp
+public:  // But only for verilated*.cpp
     // METHODS - file IO
     static IData fdNew(FILE* fp) VL_MT_SAFE {
-	if (VL_UNLIKELY(!fp)) return 0;
-	// Bit 31 indicates it's a descriptor not a MCD
-	VerilatedLockGuard lock(s_s.m_fdMutex);
-	if (s_s.m_fdFree.empty()) {
-	    // Need to create more space in m_fdps and m_fdFree
-	    size_t start = s_s.m_fdps.size();
-	    s_s.m_fdps.resize(start*2);
-	    for (size_t i=start; i<start*2; ++i) s_s.m_fdFree.push_back(static_cast<IData>(i));
-	}
-	IData idx = s_s.m_fdFree.back(); s_s.m_fdFree.pop_back();
-	s_s.m_fdps[idx] = fp;
-	return (idx | (1UL<<31));  // bit 31 indicates not MCD
+        if (VL_UNLIKELY(!fp)) return 0;
+        // Bit 31 indicates it's a descriptor not a MCD
+        VerilatedLockGuard lock(s_s.m_fdMutex);
+        if (s_s.m_fdFree.empty()) {
+            // Need to create more space in m_fdps and m_fdFree
+            size_t start = s_s.m_fdps.size();
+            s_s.m_fdps.resize(start*2);
+            for (size_t i=start; i<start*2; ++i) s_s.m_fdFree.push_back(static_cast<IData>(i));
+        }
+        IData idx = s_s.m_fdFree.back(); s_s.m_fdFree.pop_back();
+        s_s.m_fdps[idx] = fp;
+        return (idx | (1UL<<31));  // bit 31 indicates not MCD
     }
     static void fdDelete(IData fdi) VL_MT_SAFE {
-	IData idx = VL_MASK_I(31) & fdi;
-	VerilatedLockGuard lock(s_s.m_fdMutex);
-	if (VL_UNLIKELY(!(fdi & (1ULL<<31)) || idx >= s_s.m_fdps.size())) return;
-	if (VL_UNLIKELY(!s_s.m_fdps[idx])) return;  // Already free
-	s_s.m_fdps[idx] = NULL;
-	s_s.m_fdFree.push_back(idx);
+        IData idx = VL_MASK_I(31) & fdi;
+        VerilatedLockGuard lock(s_s.m_fdMutex);
+        if (VL_UNLIKELY(!(fdi & (1ULL<<31)) || idx >= s_s.m_fdps.size())) return;
+        if (VL_UNLIKELY(!s_s.m_fdps[idx])) return;  // Already free
+        s_s.m_fdps[idx] = NULL;
+        s_s.m_fdFree.push_back(idx);
     }
     static inline FILE* fdToFp(IData fdi) VL_MT_SAFE {
-	IData idx = VL_MASK_I(31) & fdi;
-	VerilatedLockGuard lock(s_s.m_fdMutex);  // This might get slow, if it does we can cache it
-	if (VL_UNLIKELY(!(fdi & (1ULL<<31)) || idx >= s_s.m_fdps.size())) return NULL;
-	return s_s.m_fdps[idx];
+        IData idx = VL_MASK_I(31) & fdi;
+        VerilatedLockGuard lock(s_s.m_fdMutex);  // This might get slow, if it does we can cache it
+        if (VL_UNLIKELY(!(fdi & (1ULL<<31)) || idx >= s_s.m_fdps.size())) return NULL;
+        return s_s.m_fdps[idx];
     }
 };
 

include/verilated_lxt2_c.cpp

@@ -1,180 +0,0 @@
-// -*- mode: C++; c-file-style: "cc-mode" -*-
-//=============================================================================
-//
-// THIS MODULE IS PUBLICLY LICENSED
-//
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
-// you can redistribute it and/or modify it under the terms of either the GNU
-// Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
-//
-// This is distributed in the hope that it will be useful, but WITHOUT ANY
-// WARRANTY; without even the implied warranty of MERCHANTABILITY or
-// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-// for more details.
-//
-//=============================================================================
-///
-/// \file
-/// \brief C++ Tracing in LXT2 Format
-///
-//=============================================================================
-// SPDIFF_OFF
-
-#include "verilatedos.h"
-#include "verilated.h"
-#include "verilated_lxt2_c.h"
-
-// Include the GTKWave implementation directly
-#include "gtkwave/lxt2_write.cpp"
-
-#include <algorithm>
-#include <cerrno>
-#include <ctime>
-#include <fcntl.h>
-#include <sstream>
-#include <sys/stat.h>
-
-#if defined(_WIN32) && !defined(__MINGW32__) && !defined(__CYGWIN__)
-# include <io.h>
-#else
-# include <unistd.h>
-#endif
-
-//=============================================================================
-
-class VerilatedLxt2CallInfo {
-protected:
-    friend class VerilatedLxt2;
-    VerilatedLxt2Callback_t m_initcb;  ///< Initialization Callback function
-    VerilatedLxt2Callback_t m_fullcb;  ///< Full Dumping Callback function
-    VerilatedLxt2Callback_t m_changecb;  ///< Incremental Dumping Callback function
-    void* m_userthis;  ///< Fake "this" for caller
-    vluint32_t m_code;  ///< Starting code number
-    // CONSTRUCTORS
-    VerilatedLxt2CallInfo (VerilatedLxt2Callback_t icb, VerilatedLxt2Callback_t fcb,
-                           VerilatedLxt2Callback_t changecb,
-                           void* ut, vluint32_t code)
-        : m_initcb(icb), m_fullcb(fcb), m_changecb(changecb), m_userthis(ut), m_code(code) {};
-    ~VerilatedLxt2CallInfo() {}
-};
-
-//=============================================================================
-// VerilatedLxt2
-
-VerilatedLxt2::VerilatedLxt2(lxt2_wr_trace* lxt2)
-    : m_lxt2(lxt2),
-      m_fullDump(true),
-      m_scopeEscape('.') {}
-
-void VerilatedLxt2::open(const char* filename) VL_MT_UNSAFE {
-    m_assertOne.check();
-    m_lxt2 = lxt2_wr_init(filename);
-    for (vluint32_t ent = 0; ent< m_callbacks.size(); ent++) {
-        VerilatedLxt2CallInfo* cip = m_callbacks[ent];
-        cip->m_code = 1;
-        (cip->m_initcb)(this, cip->m_userthis, cip->m_code);
-    }
-}
-
-void VerilatedLxt2::module(const std::string& name) {
-    m_module = name;
-}
-
-//=============================================================================
-// Decl
-
-void VerilatedLxt2::declSymbol(vluint32_t code, const char* name, int arraynum, int msb, int lsb, int flags) {
-    if (msb == 0 && lsb == 0) {
-        msb = lsb = -1;
-    }
-    std::pair<Code2SymbolType::iterator, bool> p
-        = m_code2symbol.insert(std::make_pair(code, (lxt2_wr_symbol*)(NULL)));
-    std::stringstream name_ss;
-    name_ss <<m_module<<"."<<name;
-    if (arraynum >= 0) {
-        name_ss <<"("<<arraynum<<")";
-    }
-    std::string name_s = name_ss.str();
-    for (std::string::iterator it = name_s.begin(); it != name_s.end(); ++it) {
-        if (isScopeEscape(*it)) {
-            *it = '.';
-        }
-    }
-    if (p.second) {  // New
-        p.first->second = lxt2_wr_symbol_add(m_lxt2, name_s.c_str(), 0, msb, lsb, flags);
-        assert(p.first->second);
-    } else {  // Alias
-        lxt2_wr_symbol_alias(m_lxt2, p.first->second->name, name_s.c_str(), msb, lsb);
-    }
-}
-
-//=============================================================================
-// Callbacks
-
-void VerilatedLxt2::addCallback(
-    VerilatedLxt2Callback_t initcb, VerilatedLxt2Callback_t fullcb,
-    VerilatedLxt2Callback_t changecb, void* userthis) VL_MT_UNSAFE_ONE {
-    m_assertOne.check();
-    if (VL_UNLIKELY(isOpen())) {
-        std::string msg = std::string("Internal: ")+__FILE__+"::"+__FUNCTION__+" called with already open file";
-        VL_FATAL_MT(__FILE__,__LINE__,"",msg.c_str());
-    }
-    VerilatedLxt2CallInfo* vci = new VerilatedLxt2CallInfo(initcb, fullcb, changecb, userthis, 1);
-    m_callbacks.push_back(vci);
-}
-
-//=============================================================================
-// Dumping
-
-void VerilatedLxt2::dump(vluint64_t timeui) {
-    if (!isOpen()) return;
-    if (VL_UNLIKELY(m_fullDump)) {
-        m_fullDump = false;  // No need for more full dumps
-        for (vluint32_t ent = 0; ent< m_callbacks.size(); ent++) {
-            VerilatedLxt2CallInfo* cip = m_callbacks[ent];
-            (cip->m_fullcb)(this, cip->m_userthis, cip->m_code);
-        }
-        return;
-    }
-    lxt2_wr_set_time64(m_lxt2, timeui);
-    for (vluint32_t ent = 0; ent< m_callbacks.size(); ++ent) {
-        VerilatedLxt2CallInfo* cip = m_callbacks[ent];
-        (cip->m_changecb)(this, cip->m_userthis, cip->m_code);
-    }
-}
-
-//=============================================================================
-// Helpers
-
-char* VerilatedLxt2::quad2Str(vluint64_t newval, int bits) {
-    m_valueStrBuffer.resize(bits+1);
-    char* s = m_valueStrBuffer.data();
-    for (int i = 0; i < bits; ++i) {
-        *s = '0' + ((newval>>(bits-i-1))&1);
-        ++s;
-    }
-    *s = '\0';
-    return m_valueStrBuffer.data();
-}
-
-char* VerilatedLxt2::array2Str(const vluint32_t* newval, int bits) {
-    int bq = bits/32, br = bits%32;
-    m_valueStrBuffer.resize(bits+1);
-    char* s = m_valueStrBuffer.data();
-    for (int w = bq-1; w >= 0; --w) {
-        for (int i = 0; i < 32; ++i) {
-            *s = '0' + ((newval[w]>>(32-i-1))&1);
-            ++s;
-        }
-    }
-    for (int i = 0; i < br; ++i) {
-        *s = '0' + ((newval[bq]>>(br-i-1))&1);
-        ++s;
-    }
-    *s = '\0';
-    return m_valueStrBuffer.data();
-}
-
-//********************************************************************
-// Local Variables:
-// End:

include/verilated_lxt2_c.h

@@ -1,205 +0,0 @@
-// -*- mode: C++; c-file-style: "cc-mode" -*-
-//=============================================================================
-//
-// THIS MODULE IS PUBLICLY LICENSED
-//
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
-// you can redistribute it and/or modify it under the terms of either the GNU
-// Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
-//
-// This is distributed in the hope that it will be useful, but WITHOUT ANY
-// WARRANTY; without even the implied warranty of MERCHANTABILITY or
-// FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
-// for more details.
-//
-//=============================================================================
-///
-/// \file
-/// \brief C++ Tracing in LXT2 Format
-///
-//=============================================================================
-// SPDIFF_OFF
-
-#ifndef _VERILATED_LXT2_C_H_
-#define _VERILATED_LXT2_C_H_ 1
-
-#include "verilatedos.h"
-#include "verilated.h"
-
-#include "gtkwave/lxt2_write.h"
-
-#include <map>
-#include <string>
-#include <vector>
-
-class VerilatedLxt2;
-class VerilatedLxt2CallInfo;
-typedef void (*VerilatedLxt2Callback_t)(VerilatedLxt2* vcdp, void* userthis, vluint32_t code);
-
-//=============================================================================
-// VerilatedLxt2
-/// Base class to create a Verilator LXT2 dump
-/// This is an internally used class - see VerilatedLxt2C for what to call from applications
-
-class VerilatedLxt2 {
-    typedef std::map<vluint32_t, lxt2_wr_symbol*> Code2SymbolType;
-    typedef std::vector<VerilatedLxt2CallInfo*> CallbackVec;
-private:
-    lxt2_wr_trace* m_lxt2;
-    VerilatedAssertOneThread m_assertOne;  ///< Assert only called from single thread
-    bool m_fullDump;
-    char m_scopeEscape;
-    std::string m_module;
-    CallbackVec m_callbacks;  ///< Routines to perform dumping
-    Code2SymbolType m_code2symbol;
-    // CONSTRUCTORS
-    VL_UNCOPYABLE(VerilatedLxt2);
-    void declSymbol(vluint32_t code, const char* name, int arraynum, int msb, int lsb, int flags);
-    // helpers
-    std::vector<char> m_valueStrBuffer;
-    char* quad2Str(vluint64_t newval, int bits);
-    char* array2Str(const vluint32_t *newval, int bits);
-public:
-    explicit VerilatedLxt2(lxt2_wr_trace* lxt2=NULL);
-    ~VerilatedLxt2() { if (m_lxt2 == NULL) { lxt2_wr_close(m_lxt2); } }
-    bool isOpen() const { return m_lxt2 != NULL; }
-    void open(const char* filename) VL_MT_UNSAFE;
-    void flush() VL_MT_UNSAFE { lxt2_wr_flush(m_lxt2); }
-    void close() VL_MT_UNSAFE {
-        m_assertOne.check();
-        lxt2_wr_close(m_lxt2);
-        m_lxt2 = NULL;
-    }
-    // void set_time_unit(const char* unitp);  ///< Set time units (s/ms, defaults to ns)
-    // void set_time_unit(const std::string& unit) { set_time_unit(unit.c_str()); }
-
-    // void set_time_resolution(const char* unitp);  ///< Set time resolution (s/ms, defaults to ns)
-    // void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
-
-    // double timescaleToDouble(const char* unitp);
-    // std::string doubleToTimescale(double value);
-
-    /// Change character that splits scopes.  Note whitespace are ALWAYS escapes.
-    void scopeEscape(char flag) { m_scopeEscape = flag; }
-    /// Is this an escape?
-    bool isScopeEscape(char c) { return isspace(c) || c==m_scopeEscape; }
-    /// Inside dumping routines, called each cycle to make the dump
-    void dump(vluint64_t timeui);
-    /// Inside dumping routines, declare callbacks for tracings
-    void addCallback(VerilatedLxt2Callback_t initcb, VerilatedLxt2Callback_t fullcb,
-                     VerilatedLxt2Callback_t changecb,
-                     void* userthis) VL_MT_UNSAFE_ONE;
-
-    /// Inside dumping routines, declare a module
-    void module(const std::string& name);
-    /// Inside dumping routines, declare a signal
-    void declBit(vluint32_t code, const char* name, int arraynum) {
-        declSymbol(code, name, arraynum, 0, 0, LXT2_WR_SYM_F_BITS);
-    }
-    void declBus(vluint32_t code, const char* name, int arraynum, int msb, int lsb) {
-        declSymbol(code, name, arraynum, msb, lsb, LXT2_WR_SYM_F_BITS);
-    }
-    void declDouble(vluint32_t code, const char* name, int arraynum) {
-        declSymbol(code, name, arraynum, 63, 0, LXT2_WR_SYM_F_DOUBLE);
-    }
-    void declFloat(vluint32_t code, const char* name, int arraynum) {
-        declSymbol(code, name, arraynum, 63, 0, LXT2_WR_SYM_F_DOUBLE);
-    }
-    void declQuad(vluint32_t code, const char* name, int arraynum, int msb, int lsb) {
-        declSymbol(code, name, arraynum, msb, lsb, LXT2_WR_SYM_F_BITS);
-    }
-    void declArray(vluint32_t code, const char* name, int arraynum, int msb, int lsb) {
-        declSymbol(code, name, arraynum, msb, lsb, LXT2_WR_SYM_F_BITS);
-    }
-
-    /// Inside dumping routines, dump one signal if it has changed
-    void chgBit(vluint32_t code, const vluint32_t newval) {
-        lxt2_wr_emit_value_int(m_lxt2, m_code2symbol[code], 0, newval);
-    }
-    void chgBus(vluint32_t code, const vluint32_t newval, int bits) {
-        lxt2_wr_emit_value_int(m_lxt2, m_code2symbol[code], 0, newval);
-    }
-    void chgDouble(vluint32_t code, const double newval) {
-        lxt2_wr_emit_value_double(m_lxt2, m_code2symbol[code], 0, newval);
-    }
-    void chgFloat(vluint32_t code, const float newval) {
-        lxt2_wr_emit_value_double(m_lxt2, m_code2symbol[code], 0, newval);
-    }
-    void chgQuad(vluint32_t code, const vluint64_t newval, int bits) {
-        lxt2_wr_emit_value_bit_string(m_lxt2, m_code2symbol[code], 0, quad2Str(newval, bits));
-    }
-    void chgArray(vluint32_t code, const vluint32_t* newval, int bits) {
-        lxt2_wr_emit_value_bit_string(m_lxt2, m_code2symbol[code], 0, array2Str(newval, bits));
-    }
-
-    void fullBit(vluint32_t code, const vluint32_t newval) { chgBit(code, newval); }
-    void fullBus(vluint32_t code, const vluint32_t newval, int bits) { chgBus(code, newval, bits); }
-    void fullDouble(vluint32_t code, const double newval) { chgDouble(code, newval); }
-    void fullFloat(vluint32_t code, const float newval) { chgFloat(code, newval); }
-    void fullQuad(vluint32_t code, const vluint64_t newval, int bits) { chgQuad(code, newval, bits); }
-    void fullArray(vluint32_t code, const vluint32_t* newval, int bits) { chgArray(code, newval, bits); }
-
-    void declTriBit   (vluint32_t code, const char* name, int arraynum);
-    void declTriBus   (vluint32_t code, const char* name, int arraynum, int msb, int lsb);
-    void declTriQuad  (vluint32_t code, const char* name, int arraynum, int msb, int lsb);
-    void declTriArray (vluint32_t code, const char* name, int arraynum, int msb, int lsb);
-    void fullTriBit(vluint32_t code, const vluint32_t newval, const vluint32_t newtri);
-    void fullTriBus(vluint32_t code, const vluint32_t newval, const vluint32_t newtri, int bits);
-    void fullTriQuad(vluint32_t code, const vluint64_t newval, const vluint32_t newtri, int bits);
-    void fullTriArray(vluint32_t code, const vluint32_t* newvalp, const vluint32_t* newtrip, int bits);
-    void fullBitX(vluint32_t code);
-    void fullBusX(vluint32_t code, int bits);
-    void fullQuadX(vluint32_t code, int bits);
-    void fullArrayX(vluint32_t code, int bits);
-    void chgTriBit(vluint32_t code, const vluint32_t newval, const vluint32_t newtri);
-    void chgTriBus(vluint32_t code, const vluint32_t newval, const vluint32_t newtri, int bits);
-    void chgTriQuad(vluint32_t code, const vluint64_t newval, const vluint32_t newtri, int bits);
-    void chgTriArray(vluint32_t code, const vluint32_t* newvalp, const vluint32_t* newtrip, int bits);
-};
-
-//=============================================================================
-// VerilatedLxt2C
-/// Create a LXT2 dump file in C standalone (no SystemC) simulations.
-/// Also derived for use in SystemC simulations.
-/// Thread safety: Unless otherwise indicated, every function is VL_MT_UNSAFE_ONE
-
-class VerilatedLxt2C {
-    VerilatedLxt2 m_sptrace;  ///< Trace file being created
-
-    // CONSTRUCTORS
-    VL_UNCOPYABLE(VerilatedLxt2C);
-public:
-    explicit VerilatedLxt2C(lxt2_wr_trace* filep=NULL) : m_sptrace(filep) {}
-    ~VerilatedLxt2C() {}
-public:
-    // ACCESSORS
-    /// Is file open?
-    bool isOpen() const { return m_sptrace.isOpen(); }
-    // METHODS
-    /// Open a new LXT2 file
-    void open(const char* filename) VL_MT_UNSAFE_ONE { m_sptrace.open(filename); }
-    /// Close dump
-    void close() VL_MT_UNSAFE_ONE { m_sptrace.close(); }
-    /// Flush dump
-    void flush() VL_MT_UNSAFE_ONE { m_sptrace.flush(); }
-    /// Write one cycle of dump data
-    void dump(vluint64_t timeui) { m_sptrace.dump(timeui); }
-    /// Write one cycle of dump data - backward compatible and to reduce
-    /// conversion warnings.  It's better to use a vluint64_t time instead.
-    void dump(double timestamp) { dump(static_cast<vluint64_t>(timestamp)); }
-    void dump(vluint32_t timestamp) { dump(static_cast<vluint64_t>(timestamp)); }
-    void dump(int timestamp) { dump(static_cast<vluint64_t>(timestamp)); }
-    /// Set time units (s/ms, defaults to ns)
-    /// See also VL_TIME_PRECISION, and VL_TIME_MULTIPLIER in verilated.h
-    void set_time_unit(const char* unit) { /* TODO */ }
-    void set_time_unit(const std::string& unit) { set_time_unit(unit.c_str()); }
-    /// Set time resolution (s/ms, defaults to ns)
-    /// See also VL_TIME_PRECISION, and VL_TIME_MULTIPLIER in verilated.h
-    void set_time_resolution(const char* unit) { /* TODO */ }
-    void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
-
-    /// Internal class access
-    inline VerilatedLxt2* spTrace() { return &m_sptrace; };
-};
-
-#endif  // guard

include/verilated_save.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -32,7 +32,7 @@
 # include <unistd.h>
 #endif
 
-#ifndef O_LARGEFILE // For example on WIN32
+#ifndef O_LARGEFILE  // For example on WIN32
 # define O_LARGEFILE 0
 #endif
 #ifndef O_NONBLOCK
@@ -43,8 +43,8 @@
 #endif
 
 // CONSTANTS
-static const char* const VLTSAVE_HEADER_STR = "verilatorsave01\n";	///< Value of first bytes of each file
-static const char* const VLTSAVE_TRAILER_STR = "vltsaved";	///< Value of last bytes of each file
+static const char* const VLTSAVE_HEADER_STR = "verilatorsave01\n";  ///< Value of first bytes of each file
+static const char* const VLTSAVE_TRAILER_STR = "vltsaved";  ///< Value of last bytes of each file
 
 //=============================================================================
 //=============================================================================
@@ -56,17 +56,19 @@ bool VerilatedDeserialize::readDiffers(const void* __restrict datap, size_t size
     const vluint8_t* __restrict dp = static_cast<const vluint8_t* __restrict>(datap);
     vluint8_t miss = 0;
     while (size--) {
-	miss |= (*dp++ ^ *m_cp++);
+        miss |= (*dp++ ^ *m_cp++);
     }
     return (miss!=0);
 }
 
-VerilatedDeserialize& VerilatedDeserialize::readAssert(const void* __restrict datap, size_t size) VL_MT_UNSAFE_ONE {
-    if (VL_UNLIKELY(readDiffers(datap,size))) {
-	std::string fn = filename();
-	std::string msg = std::string("Can't deserialize save-restore file as was made from different model");
-	VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
-	close();
+VerilatedDeserialize& VerilatedDeserialize::readAssert(const void* __restrict datap,
+                                                       size_t size) VL_MT_UNSAFE_ONE {
+    if (VL_UNLIKELY(readDiffers(datap, size))) {
+        std::string fn = filename();
+        std::string msg = "Can't deserialize save-restore file as was made from different model:"
+            +filename();
+        VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
+        close();
     }
     return *this;  // For function chaining
 }
@@ -84,10 +86,11 @@ void VerilatedSerialize::header() VL_MT_UNSAFE_ONE {
 void VerilatedDeserialize::header() VL_MT_UNSAFE_ONE {
     VerilatedDeserialize& os = *this;  // So can cut and paste standard >> code below
     if (VL_UNLIKELY(os.readDiffers(VLTSAVE_HEADER_STR, strlen(VLTSAVE_HEADER_STR)))) {
-	std::string fn = filename();
-	std::string msg = std::string("Can't deserialize; file has wrong header signature");
-	VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
-	close();
+        std::string fn = filename();
+        std::string msg = std::string("Can't deserialize; file has wrong header signature: ")
+            +filename();
+        VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
+        close();
     }
     os.read(Verilated::serializedPtr(), Verilated::serializedSize());
 }
@@ -101,10 +104,11 @@ void VerilatedSerialize::trailer() VL_MT_UNSAFE_ONE {
 void VerilatedDeserialize::trailer() VL_MT_UNSAFE_ONE {
     VerilatedDeserialize& os = *this;  // So can cut and paste standard >> code below
     if (VL_UNLIKELY(os.readDiffers(VLTSAVE_TRAILER_STR, strlen(VLTSAVE_TRAILER_STR)))) {
-	std::string fn = filename();
-	std::string msg = std::string("Can't deserialize; file has wrong end-of-file signature");
-	VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
-	close();
+        std::string fn = filename();
+        std::string msg = std::string("Can't deserialize; file has wrong end-of-file signature: ")
+            +filename();
+        VL_FATAL_MT(fn.c_str(), 0, "", msg.c_str());
+        close();
     }
 }
 
@@ -116,19 +120,19 @@ void VerilatedDeserialize::trailer() VL_MT_UNSAFE_ONE {
 void VerilatedSave::open(const char* filenamep) VL_MT_UNSAFE_ONE {
     m_assertOne.check();
     if (isOpen()) return;
-    VL_DEBUG_IF(VL_DBG_MSGF("- save: opening save file %s\n",filenamep););
+    VL_DEBUG_IF(VL_DBG_MSGF("- save: opening save file %s\n", filenamep););
 
     if (filenamep[0]=='|') {
-	assert(0);	// Not supported yet.
+        assert(0);  // Not supported yet.
     } else {
-	// cppcheck-suppress duplicateExpression
+        // cppcheck-suppress duplicateExpression
         m_fd = ::open(filenamep, O_CREAT|O_WRONLY|O_TRUNC|O_LARGEFILE|O_NONBLOCK|O_CLOEXEC
                       , 0666);
-	if (m_fd<0) {
-	    // User code can check isOpen()
-	    m_isOpen = false;
-	    return;
-	}
+        if (m_fd<0) {
+            // User code can check isOpen()
+            m_isOpen = false;
+            return;
+        }
     }
     m_isOpen = true;
     m_filename = filenamep;
@@ -139,19 +143,19 @@ void VerilatedSave::open(const char* filenamep) VL_MT_UNSAFE_ONE {
 void VerilatedRestore::open(const char* filenamep) VL_MT_UNSAFE_ONE {
     m_assertOne.check();
     if (isOpen()) return;
-    VL_DEBUG_IF(VL_DBG_MSGF("- restore: opening restore file %s\n",filenamep););
+    VL_DEBUG_IF(VL_DBG_MSGF("- restore: opening restore file %s\n", filenamep););
 
     if (filenamep[0]=='|') {
-	assert(0);	// Not supported yet.
+        assert(0);  // Not supported yet.
     } else {
-	// cppcheck-suppress duplicateExpression
+        // cppcheck-suppress duplicateExpression
         m_fd = ::open(filenamep, O_CREAT|O_RDONLY|O_LARGEFILE|O_CLOEXEC
                       , 0666);
-	if (m_fd<0) {
-	    // User code can check isOpen()
-	    m_isOpen = false;
-	    return;
-	}
+        if (m_fd<0) {
+            // User code can check isOpen()
+            m_isOpen = false;
+            return;
+        }
     }
     m_isOpen = true;
     m_filename = filenamep;
@@ -184,23 +188,23 @@ void VerilatedSave::flush() VL_MT_UNSAFE_ONE {
     if (VL_UNLIKELY(!isOpen())) return;
     vluint8_t* wp = m_bufp;
     while (1) {
-	ssize_t remaining = (m_cp - wp);
-	if (remaining==0) break;
-	errno = 0;
+        ssize_t remaining = (m_cp - wp);
+        if (remaining==0) break;
+        errno = 0;
         ssize_t got = ::write(m_fd, wp, remaining);
-	if (got>0) {
-	    wp += got;
-	} else if (got < 0) {
-	    if (errno != EAGAIN && errno != EINTR) {
-		// write failed, presume error (perhaps out of disk space)
-		std::string msg = std::string(__FUNCTION__)+": "+strerror(errno);
-		VL_FATAL_MT("",0,"",msg.c_str());
-		close();
-		break;
-	    }
-	}
+        if (got>0) {
+            wp += got;
+        } else if (got < 0) {
+            if (errno != EAGAIN && errno != EINTR) {
+                // write failed, presume error (perhaps out of disk space)
+                std::string msg = std::string(__FUNCTION__)+": "+strerror(errno);
+                VL_FATAL_MT("", 0, "", msg.c_str());
+                close();
+                break;
+            }
+        }
     }
-    m_cp = m_bufp; // Reset buffer
+    m_cp = m_bufp;  // Reset buffer
 }
 
 void VerilatedRestore::fill() VL_MT_UNSAFE_ONE {
@@ -210,32 +214,31 @@ void VerilatedRestore::fill() VL_MT_UNSAFE_ONE {
     vluint8_t* rp = m_bufp;
     for (vluint8_t* sp=m_cp; sp < m_endp;) *rp++ = *sp++;  // Overlaps
     m_endp = m_bufp + (m_endp - m_cp);
-    m_cp = m_bufp; // Reset buffer
+    m_cp = m_bufp;  // Reset buffer
     // Read into buffer starting at m_endp
     while (1) {
-	ssize_t remaining = (m_bufp+bufferSize() - m_endp);
-	if (remaining==0) break;
-	errno = 0;
+        ssize_t remaining = (m_bufp+bufferSize() - m_endp);
+        if (remaining==0) break;
+        errno = 0;
         ssize_t got = ::read(m_fd, m_endp, remaining);
-	if (got>0) {
-	    m_endp += got;
-	} else if (got < 0) {
-	    if (errno != EAGAIN && errno != EINTR) {
-		// write failed, presume error (perhaps out of disk space)
-		std::string msg = std::string(__FUNCTION__)+": "+strerror(errno);
-		VL_FATAL_MT("",0,"",msg.c_str());
-		close();
-		break;
-	    }
-	} else { // got==0, EOF
-	    // Fill buffer from here to end with NULLs so reader's don't need to check eof each character.
-	    while (m_endp < m_bufp+bufferSize()) *m_endp++ = '\0';
-	    break;
-	}
+        if (got>0) {
+            m_endp += got;
+        } else if (got < 0) {
+            if (errno != EAGAIN && errno != EINTR) {
+                // write failed, presume error (perhaps out of disk space)
+                std::string msg = std::string(__FUNCTION__)+": "+strerror(errno);
+                VL_FATAL_MT("", 0, "", msg.c_str());
+                close();
+                break;
+            }
+        } else {  // got==0, EOF
+            // Fill buffer from here to end with NULLs so reader's don't
+            // need to check eof each character.
+            while (m_endp < m_bufp+bufferSize()) *m_endp++ = '\0';
+            break;
+        }
     }
 }
 
 //=============================================================================
 // Serialization of types
-
-

include/verilated_save.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2012-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2012-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -34,10 +34,10 @@ class VerilatedSerialize {
 protected:
     // MEMBERS
     // For speed, keep m_cp as the first member of this structure
-    vluint8_t*		m_cp;		///< Current pointer into m_bufp buffer
-    vluint8_t*		m_bufp;		///< Output buffer
-    bool 		m_isOpen;	///< True indicates open file/stream
-    std::string		m_filename;	///< Filename, for error messages
+    vluint8_t*          m_cp;           ///< Current pointer into m_bufp buffer
+    vluint8_t*          m_bufp;         ///< Output buffer
+    bool                m_isOpen;       ///< True indicates open file/stream
+    std::string         m_filename;     ///< Filename, for error messages
     VerilatedAssertOneThread m_assertOne;  ///< Assert only called from single thread
 
     inline static size_t bufferSize() { return 256*1024; }  // See below for slack calculation
@@ -50,13 +50,13 @@ protected:
     VL_UNCOPYABLE(VerilatedSerialize);
 public:
     VerilatedSerialize() {
-	m_isOpen = false;
-	m_bufp = new vluint8_t [bufferSize()];
-	m_cp = m_bufp;
+        m_isOpen = false;
+        m_bufp = new vluint8_t [bufferSize()];
+        m_cp = m_bufp;
     }
     virtual ~VerilatedSerialize() {
-	close();
-	if (m_bufp) { delete m_bufp; m_bufp=NULL; }
+        close();
+        if (m_bufp) { delete m_bufp; m_bufp=NULL; }
     }
     // METHODS
     bool isOpen() const { return m_isOpen; }
@@ -64,24 +64,24 @@ public:
     virtual void close() VL_MT_UNSAFE_ONE { flush(); }
     virtual void flush() VL_MT_UNSAFE_ONE {}
     inline VerilatedSerialize& write(const void* __restrict datap, size_t size) VL_MT_UNSAFE_ONE {
-	const vluint8_t* __restrict dp = (const vluint8_t* __restrict)datap;
-	while (size) {
-	    bufferCheck();
-	    size_t blk = size;  if (blk>bufferInsertSize()) blk = bufferInsertSize();
-	    const vluint8_t* __restrict maxp = dp + blk;
-	    while (dp < maxp) *m_cp++ = *dp++;
-	    size -= blk;
-	}
-	return *this;  // For function chaining
+        const vluint8_t* __restrict dp = (const vluint8_t* __restrict)datap;
+        while (size) {
+            bufferCheck();
+            size_t blk = size;  if (blk>bufferInsertSize()) blk = bufferInsertSize();
+            const vluint8_t* __restrict maxp = dp + blk;
+            while (dp < maxp) *m_cp++ = *dp++;
+            size -= blk;
+        }
+        return *this;  // For function chaining
     }
 private:
     VerilatedSerialize& bufferCheck() VL_MT_UNSAFE_ONE {
-	// Flush the write buffer if there's not enough space left for new information
-	// We only call this once per vector, so we need enough slop for a very wide "b###" line
-	if (VL_UNLIKELY(m_cp > (m_bufp+(bufferSize()-bufferInsertSize())))) {
-	    flush();
-	}
-	return *this;  // For function chaining
+        // Flush the write buffer if there's not enough space left for new information
+        // We only call this once per vector, so we need enough slop for a very wide "b###" line
+        if (VL_UNLIKELY(m_cp > (m_bufp+(bufferSize()-bufferInsertSize())))) {
+            flush();
+        }
+        return *this;  // For function chaining
     }
 };
 
@@ -93,12 +93,12 @@ class VerilatedDeserialize {
 protected:
     // MEMBERS
     // For speed, keep m_cp as the first member of this structure
-    vluint8_t*		m_cp;		///< Current pointer into m_bufp buffer
-    vluint8_t*		m_bufp;		///< Output buffer
-    vluint8_t*		m_endp;		///< Last valid byte in m_bufp buffer
-    bool 		m_isOpen;	///< True indicates open file/stream
-    std::string		m_filename;	///< Filename, for error messages
-    VerilatedAssertOneThread m_assertOne;	///< Assert only called from single thread
+    vluint8_t*          m_cp;           ///< Current pointer into m_bufp buffer
+    vluint8_t*          m_bufp;         ///< Output buffer
+    vluint8_t*          m_endp;         ///< Last valid byte in m_bufp buffer
+    bool                m_isOpen;       ///< True indicates open file/stream
+    std::string         m_filename;     ///< Filename, for error messages
+    VerilatedAssertOneThread m_assertOne;       ///< Assert only called from single thread
 
     inline static size_t bufferSize() { return 256*1024; }  // See below for slack calculation
     inline static size_t bufferInsertSize() { return 16*1024; }
@@ -111,14 +111,14 @@ protected:
     VL_UNCOPYABLE(VerilatedDeserialize);
 public:
     VerilatedDeserialize() {
-	m_isOpen = false;
-	m_bufp = new vluint8_t [bufferSize()];
-	m_cp = m_bufp;
-	m_endp = NULL;
+        m_isOpen = false;
+        m_bufp = new vluint8_t [bufferSize()];
+        m_cp = m_bufp;
+        m_endp = NULL;
     }
     virtual ~VerilatedDeserialize() {
-	close();
-	if (m_bufp) { delete m_bufp; m_bufp=NULL; }
+        close();
+        if (m_bufp) { delete m_bufp; m_bufp=NULL; }
     }
     // METHODS
     bool isOpen() const { return m_isOpen; }
@@ -126,15 +126,15 @@ public:
     virtual void close() VL_MT_UNSAFE_ONE { flush(); }
     virtual void flush() VL_MT_UNSAFE_ONE {}
     inline VerilatedDeserialize& read(void* __restrict datap, size_t size) VL_MT_UNSAFE_ONE {
-	vluint8_t* __restrict dp = (vluint8_t* __restrict)datap;
-	while (size) {
-	    bufferCheck();
-	    size_t blk = size;  if (blk>bufferInsertSize()) blk = bufferInsertSize();
-	    const vluint8_t* __restrict maxp = dp + blk;
-	    while (dp < maxp) *dp++ = *m_cp++;
-	    size -= blk;
-	}
-	return *this;  // For function chaining
+        vluint8_t* __restrict dp = (vluint8_t* __restrict)datap;
+        while (size) {
+            bufferCheck();
+            size_t blk = size;  if (blk>bufferInsertSize()) blk = bufferInsertSize();
+            const vluint8_t* __restrict maxp = dp + blk;
+            while (dp < maxp) *dp++ = *m_cp++;
+            size -= blk;
+        }
+        return *this;  // For function chaining
     }
     // Read a datum and compare with expected value
     VerilatedDeserialize& readAssert(const void* __restrict datap, size_t size) VL_MT_UNSAFE_ONE;
@@ -143,12 +143,12 @@ public:
 private:
     bool readDiffers(const void* __restrict datap, size_t size) VL_MT_UNSAFE_ONE;
     VerilatedDeserialize& bufferCheck() VL_MT_UNSAFE_ONE {
-	// Flush the write buffer if there's not enough space left for new information
-	// We only call this once per vector, so we need enough slop for a very wide "b###" line
-	if (VL_UNLIKELY((m_cp+bufferInsertSize()) > m_endp)) {
-	    fill();
-	}
-	return *this;  // For function chaining
+        // Flush the write buffer if there's not enough space left for new information
+        // We only call this once per vector, so we need enough slop for a very wide "b###" line
+        if (VL_UNLIKELY((m_cp+bufferInsertSize()) > m_endp)) {
+            fill();
+        }
+        return *this;  // For function chaining
     }
 };
 
@@ -158,7 +158,7 @@ private:
 
 class VerilatedSave : public VerilatedSerialize {
 private:
-    int			m_fd;		///< File descriptor we're writing to
+    int                 m_fd;           ///< File descriptor we're writing to
 
 public:
     // CONSTRUCTORS
@@ -177,7 +177,7 @@ public:
 
 class VerilatedRestore : public VerilatedDeserialize {
 private:
-    int			m_fd;		///< File descriptor we're writing to
+    int                 m_fd;           ///< File descriptor we're writing to
 
 public:
     // CONSTRUCTORS
@@ -237,15 +237,15 @@ inline VerilatedDeserialize& operator>>(VerilatedDeserialize& os, float& rhs) {
     return os.read(&rhs, sizeof(rhs));
 }
 inline VerilatedSerialize&   operator<<(VerilatedSerialize& os,   std::string& rhs) {
-    vluint32_t len=rhs.length();
+    vluint32_t len = rhs.length();
     os<<len;
     return os.write(rhs.data(), len);
 }
 inline VerilatedDeserialize& operator>>(VerilatedDeserialize& os, std::string& rhs) {
-    vluint32_t len=0;
+    vluint32_t len = 0;
     os>>len;
     rhs.resize(len);
     return os.read((void*)rhs.data(), len);
 }
 
-#endif // guard
+#endif  // Guard

include/verilated_sc.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2009-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2009-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -25,7 +25,7 @@
 
 
 #ifndef _VERILATED_SC_H_
-#define _VERILATED_SC_H_ 1 ///< Header Guard
+#define _VERILATED_SC_H_ 1  ///< Header Guard
 
 #include "verilatedos.h"
 
@@ -50,4 +50,4 @@ public:
 
 //=========================================================================
 
-#endif // guard
+#endif  // Guard

include/verilated_sym_props.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -30,7 +30,7 @@
 
 
 #ifndef _VERILATED_SYM_PROPS_H_
-#define _VERILATED_SYM_PROPS_H_ 1 ///< Header Guard
+#define _VERILATED_SYM_PROPS_H_ 1  ///< Header Guard
 
 #include "verilatedos.h"
 
@@ -142,22 +142,28 @@ public:
     const VerilatedRange& unpacked() const { return m_unpacked[0]; }
     // DPI accessors
     int left(int dim) const {
-        return dim==0 ? m_packed.left() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].left() : 0;
+        return dim==0 ? m_packed.left()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].left() : 0;
     }
     int right(int dim) const {
-        return dim==0 ? m_packed.right() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].right() : 0;
+        return dim==0 ? m_packed.right()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].right() : 0;
     }
     int low(int dim) const {
-        return dim==0 ? m_packed.low() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].low() : 0;
+        return dim==0 ? m_packed.low()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].low() : 0;
     }
     int high(int dim) const {
-        return dim==0 ? m_packed.high() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].high() : 0;
+        return dim==0 ? m_packed.high()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].high() : 0;
     }
     int increment(int dim) const {
-        return dim==0 ? m_packed.increment() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].increment() : 0;
+        return dim==0 ? m_packed.increment()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].increment() : 0;
     }
     int elements(int dim) const {
-        return dim==0 ? m_packed.elements() : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].elements() : 0;
+        return dim==0 ? m_packed.elements()
+            : VL_LIKELY(dim>=1 && dim<=3) ? m_unpacked[dim-1].elements() : 0;
     }
     /// Total size in bytes (note DPI limited to 4GB)
     size_t totalSize() const;
@@ -223,4 +229,4 @@ public:
     const char* name() const { return m_namep; }
 };
 
-#endif // Guard
+#endif  // Guard

include/verilated_syms.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -29,7 +29,7 @@
 
 
 #ifndef _VERILATED_SYMS_H_
-#define _VERILATED_SYMS_H_ 1 ///< Header Guard
+#define _VERILATED_SYMS_H_ 1  ///< Header Guard
 
 #include "verilatedos.h"
 #include "verilated_heavy.h"
@@ -63,4 +63,4 @@ public:
     ~VerilatedVarNameMap() {}
 };
 
-#endif // Guard
+#endif  // Guard

include/verilated_threads.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2012-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2012-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -119,8 +119,11 @@ VlThreadPool::VlThreadPool(int nThreads, bool profiling)
     // --threads N passes nThreads=N-1, as the "main" threads counts as 1
     unsigned cpus = std::thread::hardware_concurrency();
     if (cpus < nThreads+1) {
-        VL_PRINTF_MT("%%Warning: System has %u CPUs but model Verilated with"
-                     " --threads %d; may run slow.\n", cpus, nThreads+1);
+        static int warnedOnce = 0;
+        if (!warnedOnce++) {
+            VL_PRINTF_MT("%%Warning: System has %u CPUs but model Verilated with"
+                         " --threads %d; may run slow.\n", cpus, nThreads+1);
+        }
     }
     // Create'em
     for (int i=0; i<nThreads; ++i) {
@@ -218,8 +221,7 @@ void VlThreadPool::profileDump(const char* filenamep, vluint64_t ticksElapsed) {
                         eit->m_cpu,
                         thread_id);
                 break;
-            default: assert(false);
-                break;
+            default: assert(false); break;  // LCOV_EXCL_LINE
             }
         }
     }

include/verilated_threads.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2012-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2012-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -52,6 +52,10 @@ public:
 
     // METHODS
     static vluint64_t yields() { return s_yields; }
+    static void yieldThread() {
+        ++s_yields;  // Statistics
+        std::this_thread::yield();
+    }
 
     // Block until notify() has occurred, then return.
     // If notify() has already occurred, return immediately.
@@ -63,11 +67,10 @@ public:
         unsigned ct = 0;
         while (VL_UNLIKELY(!notified())) {
             VL_CPU_RELAX();
-            ct++;
+            ++ct;
             if (VL_UNLIKELY(ct > VL_LOCK_SPINS)) {
                 ct = 0;
-                ++s_yields;  // Statistics
-                std::this_thread::yield();
+                yieldThread();
             }
         }
     }
@@ -149,8 +152,14 @@ public:
         return m_upstreamDepsDone.load(std::memory_order_acquire) == target;
     }
     inline void waitUntilUpstreamDone(bool evenCycle) const {
+        unsigned ct = 0;
         while (VL_UNLIKELY(!areUpstreamDepsDone(evenCycle))) {
             VL_CPU_RELAX();
+            ++ct;
+            if (VL_UNLIKELY(ct > VL_LOCK_SPINS)) {
+                ct = 0;
+                VlNotification::yieldThread();
+            }
         }
     }
 };

include/verilated_unordered_set_map.h

@@ -7,7 +7,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -122,9 +122,9 @@ public:
     class iterator {
     protected:
         // MEMBERS
-        size_t m_bucketIdx; //  Bucket this iterator points into.
-        typename Bucket::iterator m_bit; //  Bucket-local iterator.
-        const vl_unordered_set* m_setp;  //  The containing set.
+        size_t m_bucketIdx;  //  Bucket this iterator points into
+        typename Bucket::iterator m_bit;  // Bucket-local iterator
+        const vl_unordered_set* m_setp;  // The containing set
 
     public:
         // CONSTRUCTORS
@@ -469,7 +469,7 @@ private:
 
     // MEMBERS
     typedef vl_unordered_set<KeyValPair, KeyHash, KeyEqual> MapSet;
-    MapSet m_set;   //  Wrap this vl_unordered_set which holds all state.
+    MapSet m_set;  // Wrap this vl_unordered_set which holds all state.
 
 public:
     // CONSTRUCTORS

include/verilated_vcd_c.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -68,14 +68,17 @@ public:
     }
     static void removeVcd(const VerilatedVcd* vcdp) VL_EXCLUDES(singleton().s_vcdMutex) {
         VerilatedLockGuard lock(singleton().s_vcdMutex);
-        VcdVec::iterator pos = find(singleton().s_vcdVecp.begin(), singleton().s_vcdVecp.end(), vcdp);
+        VcdVec::iterator pos = find(singleton().s_vcdVecp.begin(),
+                                    singleton().s_vcdVecp.end(), vcdp);
         if (pos != singleton().s_vcdVecp.end()) { singleton().s_vcdVecp.erase(pos); }
     }
     static void flush_all() VL_EXCLUDES(singleton().s_vcdMutex) VL_MT_UNSAFE_ONE {
-        // Thread safety: Although this function is protected by a mutex so perhaps
-        // in the future we can allow tracing in separate threads, vcdp->flush() assumes call from single thread
+        // Thread safety: Although this function is protected by a mutex so
+        // perhaps in the future we can allow tracing in separate threads,
+        // vcdp->flush() assumes call from single thread
         VerilatedLockGuard lock(singleton().s_vcdMutex);
-        for (VcdVec::const_iterator it=singleton().s_vcdVecp.begin(); it!=singleton().s_vcdVecp.end(); ++it) {
+        for (VcdVec::const_iterator it = singleton().s_vcdVecp.begin();
+             it != singleton().s_vcdVecp.end(); ++it) {
             VerilatedVcd* vcdp = *it;
             vcdp->flush();
         }
@@ -102,7 +105,7 @@ protected:
     VerilatedVcdCallInfo(VerilatedVcdCallback_t icb, VerilatedVcdCallback_t fcb,
                          VerilatedVcdCallback_t changecb,
                          void* ut, vluint32_t code)
-        : m_initcb(icb), m_fullcb(fcb), m_changecb(changecb), m_userthis(ut), m_code(code) {};
+        : m_initcb(icb), m_fullcb(fcb), m_changecb(changecb), m_userthis(ut), m_code(code) {}
     ~VerilatedVcdCallInfo() {}
 };
 
@@ -523,7 +526,8 @@ void VerilatedVcd::module(const std::string& name) {
 
 void VerilatedVcd::declare(vluint32_t code, const char* name, const char* wirep,
                            int arraynum, bool tri, bool bussed, int msb, int lsb) {
-    if (!code) { VL_FATAL_MT(__FILE__,__LINE__,"","Internal: internal trace problem, code 0 is illegal"); }
+    if (!code) { VL_FATAL_MT(__FILE__, __LINE__, "",
+                             "Internal: internal trace problem, code 0 is illegal"); }
 
     int bits = ((msb>lsb)?(msb-lsb):(lsb-msb))+1;
     int codesNeeded = 1+int(bits/32);
@@ -644,10 +648,12 @@ void VerilatedVcd::addCallback(
 {
     m_assertOne.check();
     if (VL_UNLIKELY(isOpen())) {
-        std::string msg = std::string("Internal: ")+__FILE__+"::"+__FUNCTION__+" called with already open file";
-        VL_FATAL_MT(__FILE__,__LINE__,"",msg.c_str());
+        std::string msg = std::string("Internal: ")+__FILE__+"::"+__FUNCTION__
+            +" called with already open file";
+        VL_FATAL_MT(__FILE__, __LINE__, "", msg.c_str());
     }
-    VerilatedVcdCallInfo* vci = new VerilatedVcdCallInfo(initcb, fullcb, changecb, userthis, m_nextCode);
+    VerilatedVcdCallInfo* vci
+        = new VerilatedVcdCallInfo(initcb, fullcb, changecb, userthis, m_nextCode);
     m_callbacks.push_back(vci);
 }
 

include/verilated_vcd_c.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -40,7 +40,7 @@ class VerilatedVcdCallInfo;
 
 class VerilatedVcdFile {
 private:
-    int                 m_fd;           ///< File descriptor we're writing to
+    int m_fd;  ///< File descriptor we're writing to
 public:
     // METHODS
     VerilatedVcdFile() : m_fd(0) {}
@@ -134,17 +134,24 @@ private:
     // cppcheck-suppress functionConst
     void dumpDone();
     inline void printCode(vluint32_t code) {
-        if (code>=(94*94*94)) *m_writep++ = static_cast<char>((code/94/94/94)%94+33);
-        if (code>=(94*94))    *m_writep++ = static_cast<char>((code/94/94)%94+33);
-        if (code>=(94))       *m_writep++ = static_cast<char>((code/94)%94+33);
-        *m_writep++ = static_cast<char>((code)%94+33);
+        *m_writep++ = static_cast<char>('!' + code % 94);
+        code /= 94;
+        while (code) {
+            code--;
+            *m_writep++ = static_cast<char>('!' + code % 94);
+            code /= 94;
+        }
     }
     static std::string stringCode(vluint32_t code) VL_PURE {
         std::string out;
-        if (code>=(94*94*94)) out += static_cast<char>((code/94/94/94)%94+33);
-        if (code>=(94*94))    out += static_cast<char>((code/94/94)%94+33);
-        if (code>=(94))       out += static_cast<char>((code/94)%94+33);
-        return out + static_cast<char>((code)%94+33);
+        out += static_cast<char>('!' + code % 94);
+        code /= 94;
+        while (code) {
+            code--;
+            out += static_cast<char>('!' + code % 94);
+            code /= 94;
+        }
+        return out;
     }
 
     // CONSTRUCTORS
@@ -155,7 +162,7 @@ public:
 
     // ACCESSORS
     /// Set size in megabytes after which new file should be created
-    void rolloverMB(vluint64_t rolloverMB) { m_rolloverMB=rolloverMB; };
+    void rolloverMB(vluint64_t rolloverMB) { m_rolloverMB=rolloverMB; }
     /// Is file open?
     bool isOpen() const { return m_isOpen; }
     /// Change character that splits scopes.  Note whitespace are ALWAYS escapes.
@@ -261,7 +268,8 @@ public:
         *m_writep++=' '; printCode(code); *m_writep++='\n';
         bufferCheck();
     }
-    void fullTriQuad(vluint32_t code, const vluint64_t newval, const vluint32_t newtri, int bits) {
+    void fullTriQuad(vluint32_t code, const vluint64_t newval,
+                     const vluint32_t newtri, int bits) {
         (*(reinterpret_cast<vluint64_t*>(&m_sigs_oldvalp[code]))) = newval;
         (*(reinterpret_cast<vluint64_t*>(&m_sigs_oldvalp[code+1]))) = newtri;
         *m_writep++='b';
@@ -272,7 +280,8 @@ public:
         *m_writep++=' '; printCode(code); *m_writep++='\n';
         bufferCheck();
     }
-    void fullTriArray(vluint32_t code, const vluint32_t* newvalp, const vluint32_t* newtrip, int bits) {
+    void fullTriArray(vluint32_t code, const vluint32_t* newvalp,
+                      const vluint32_t* newtrip, int bits) {
         for (int word=0; word<(((bits-1)/32)+1); ++word) {
             m_sigs_oldvalp[code+word*2]   = newvalp[word];
             m_sigs_oldvalp[code+word*2+1] = newtrip[word];
@@ -312,7 +321,8 @@ public:
     inline void chgBit(vluint32_t code, const vluint32_t newval) {
         vluint32_t diff = m_sigs_oldvalp[code] ^ newval;
         if (VL_UNLIKELY(diff)) {
-            // Verilator 3.510 and newer provide clean input, so the below is only for back compatibility
+            // Verilator 3.510 and newer provide clean input, so the below
+            // is only for back compatibility
             if (VL_UNLIKELY(diff & 1)) {  // Change after clean?
                 fullBit(code, newval);
             }
@@ -342,17 +352,20 @@ public:
             }
         }
     }
-    inline void chgTriBit(vluint32_t code, const vluint32_t newval, const vluint32_t newtri) {
+    inline void chgTriBit(vluint32_t code, const vluint32_t newval,
+                          const vluint32_t newtri) {
         vluint32_t diff = ((m_sigs_oldvalp[code] ^ newval)
                          | (m_sigs_oldvalp[code+1] ^ newtri));
         if (VL_UNLIKELY(diff)) {
-            // Verilator 3.510 and newer provide clean input, so the below is only for back compatibility
+            // Verilator 3.510 and newer provide clean input, so the below
+            // is only for back compatibility
             if (VL_UNLIKELY(diff & 1)) {  // Change after clean?
                 fullTriBit(code, newval, newtri);
             }
         }
     }
-    inline void chgTriBus(vluint32_t code, const vluint32_t newval, const vluint32_t newtri, int bits) {
+    inline void chgTriBus(vluint32_t code, const vluint32_t newval,
+                          const vluint32_t newtri, int bits) {
         vluint32_t diff = ((m_sigs_oldvalp[code] ^ newval)
                          | (m_sigs_oldvalp[code+1] ^ newtri));
         if (VL_UNLIKELY(diff)) {
@@ -361,7 +374,8 @@ public:
             }
         }
     }
-    inline void chgTriQuad(vluint32_t code, const vluint64_t newval, const vluint32_t newtri, int bits) {
+    inline void chgTriQuad(vluint32_t code, const vluint64_t newval,
+                           const vluint32_t newtri, int bits) {
         vluint64_t diff = ( ((*(reinterpret_cast<vluint64_t*>(&m_sigs_oldvalp[code]))) ^ newval)
                             | ((*(reinterpret_cast<vluint64_t*>(&m_sigs_oldvalp[code+1]))) ^ newtri));
         if (VL_UNLIKELY(diff)) {
@@ -370,7 +384,8 @@ public:
             }
         }
     }
-    inline void chgTriArray(vluint32_t code, const vluint32_t* newvalp, const vluint32_t* newtrip, int bits) {
+    inline void chgTriArray(vluint32_t code, const vluint32_t* newvalp,
+                            const vluint32_t* newtrip, int bits) {
         for (int word=0; word<(((bits-1)/32)+1); ++word) {
             if (VL_UNLIKELY((m_sigs_oldvalp[code+word*2] ^ newvalp[word])
                             | (m_sigs_oldvalp[code+word*2+1] ^ newtrip[word]))) {
@@ -425,7 +440,7 @@ public:
     /// "cat" to be used to combine the header plus any number of data files.
     void openNext(bool incFilename=true) VL_MT_UNSAFE_ONE { m_sptrace.openNext(incFilename); }
     /// Set size in megabytes after which new file should be created
-    void rolloverMB(size_t rolloverMB) { m_sptrace.rolloverMB(rolloverMB); };
+    void rolloverMB(size_t rolloverMB) { m_sptrace.rolloverMB(rolloverMB); }
     /// Close dump
     void close() VL_MT_UNSAFE_ONE { m_sptrace.close(); }
     /// Flush dump
@@ -447,7 +462,7 @@ public:
     void set_time_resolution(const std::string& unit) { set_time_resolution(unit.c_str()); }
 
     /// Internal class access
-    inline VerilatedVcd* spTrace() { return &m_sptrace; };
+    inline VerilatedVcd* spTrace() { return &m_sptrace; }
 };
 
 #endif  // guard

include/verilated_vcd_sc.cpp

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //

include/verilated_vcd_sc.h

@@ -3,7 +3,7 @@
 //
 // THIS MODULE IS PUBLICLY LICENSED
 //
-// Copyright 2001-2018 by Wilson Snyder.  This program is free software;
+// Copyright 2001-2019 by Wilson Snyder.  This program is free software;
 // you can redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License Version 2.0.
 //
@@ -47,7 +47,8 @@ public:
         sc_get_curr_simcontext()->add_trace_file(this);
 # if (SYSTEMC_VERSION>=20060505)
         // We want to avoid a depreciated warning, but still be back compatible.
-        // Turning off the message just for this still results in an annoying "to turn off" message.
+        // Turning off the message just for this still results in an
+        // annoying "to turn off" message.
         sc_time t1sec(1,SC_SEC);
         if (t1sec.to_default_time_units()!=0) {
             sc_time tunits(1.0/t1sec.to_default_time_units(),SC_SEC);
@@ -69,7 +70,8 @@ public:
 # if (SYSTEMC_VERSION>20011000)
         if (!delta_cycle) { this->dump(sc_time_stamp().to_double()); }
 # else
-        // VCD files must have integer timestamps, so we write all times in increments of time_resolution
+        // VCD files must have integer timestamps, so we write all times in
+        // increments of time_resolution
         if (!delta_cycle) { this->dump(sc_time_stamp().to_double()); }
 # endif
     }

include/verilated_vpi.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2009-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2009-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -24,7 +24,7 @@
 //=========================================================================
 
 #ifndef _VERILATED_VPI_H_
-#define _VERILATED_VPI_H_ 1 ///< Header Guard
+#define _VERILATED_VPI_H_ 1  ///< Header Guard
 
 #include "verilatedos.h"
 #include "verilated.h"
@@ -49,5 +49,4 @@ public:
     static void selfTest() VL_MT_UNSAFE_ONE;
 };
 
-
-#endif // Guard
+#endif  // Guard

include/verilatedos.h

@@ -1,7 +1,7 @@
 // -*- mode: C++; c-file-style: "cc-mode" -*-
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder. This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder. This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License.
 // Version 2.0.
@@ -16,11 +16,11 @@
 /// \file
 /// \brief Verilator: Common include for OS portability (verilated & verilator)
 ///
-///	This header is used by both the Verilator source code (run on the
-///	build and host system), and the Verilated output (run on the target
-///	system).  Code needed by only the host system goes into
-///	config_build.h.in, code needed by Verilated code only goes into
-///	verilated.h, and code needed by both goes here (verilatedos.h).
+///     This header is used by both the Verilator source code (run on the
+///     build and host system), and the Verilated output (run on the target
+///     system).  Code needed by only the host system goes into
+///     config_build.h.in, code needed by Verilated code only goes into
+///     verilated.h, and code needed by both goes here (verilatedos.h).
 ///
 /// Code available from: http://www.veripool.org/verilator
 ///
@@ -28,7 +28,7 @@
 
 
 #ifndef _VERILATEDOS_H_
-#define _VERILATEDOS_H_ 1 ///< Header Guard
+#define _VERILATEDOS_H_ 1  ///< Header Guard
 
 //=========================================================================
 // Compiler pragma abstraction
@@ -36,12 +36,10 @@
 #ifdef __GNUC__
 # define VL_ATTR_ALIGNED(alignment) __attribute__ ((aligned (alignment)))
 # define VL_ATTR_ALWINLINE __attribute__ ((always_inline))
+# define VL_ATTR_COLD __attribute__ ((cold))
+# define VL_ATTR_HOT __attribute__ ((hot))
 # define VL_ATTR_NORETURN __attribute__ ((noreturn))
-# ifdef _WIN32
-#  define VL_ATTR_PRINTF(fmtArgNum)  // GCC with MS runtime will fool the print arg checker
-# else
-#  define VL_ATTR_PRINTF(fmtArgNum) __attribute__ ((format (printf, (fmtArgNum), (fmtArgNum)+1)))
-# endif
+# define VL_ATTR_PRINTF(fmtArgNum) __attribute__ ((format (printf, (fmtArgNum), (fmtArgNum)+1)))
 # define VL_ATTR_PURE __attribute__ ((pure))
 # define VL_ATTR_UNUSED __attribute__ ((unused))
 # define VL_FUNC  __func__
@@ -58,8 +56,8 @@
 #  define VL_EXCLUDES(x) __attribute__ ((locks_excluded(x)))
 #  define VL_SCOPED_CAPABILITY __attribute__ ((scoped_lockable))
 # endif
-# define VL_LIKELY(x)	__builtin_expect(!!(x), 1)
-# define VL_UNLIKELY(x)	__builtin_expect(!!(x), 0)
+# define VL_LIKELY(x)   __builtin_expect(!!(x), 1)
+# define VL_UNLIKELY(x) __builtin_expect(!!(x), 0)
 # define VL_UNREACHABLE __builtin_unreachable();
 # define VL_PREFETCH_RD(p) __builtin_prefetch((p),0)
 # define VL_PREFETCH_RW(p) __builtin_prefetch((p),1)
@@ -69,51 +67,58 @@
 
 // Defaults for unsupported compiler features
 #ifndef VL_ATTR_ALIGNED
-# define VL_ATTR_ALIGNED(alignment)	///< Align structure to specified byte alignment
+# define VL_ATTR_ALIGNED(alignment)     ///< Align structure to specified byte alignment
 #endif
 #ifndef VL_ATTR_ALWINLINE
-# define VL_ATTR_ALWINLINE		///< Inline, even when not optimizing
+# define VL_ATTR_ALWINLINE              ///< Inline, even when not optimizing
+#endif
+#ifndef VL_ATTR_COLD
+# define VL_ATTR_COLD                   ///< Function is rarely executed
+#endif
+#ifndef VL_ATTR_HOT
+# define VL_ATTR_HOT                    ///< Function is highly executed
 #endif
 #ifndef VL_ATTR_NORETURN
-# define VL_ATTR_NORETURN		///< Function does not ever return
+# define VL_ATTR_NORETURN               ///< Function does not ever return
 #endif
 #ifndef VL_ATTR_PRINTF
-# define VL_ATTR_PRINTF(fmtArgNum)	///< Function with printf format checking
+# define VL_ATTR_PRINTF(fmtArgNum)      ///< Function with printf format checking
 #endif
 #ifndef VL_ATTR_PURE
-# define VL_ATTR_PURE			///< Function is pure (and thus also VL_MT_SAFE)
+# define VL_ATTR_PURE                   ///< Function is pure (and thus also VL_MT_SAFE)
 #endif
 #ifndef VL_ATTR_UNUSED
-# define VL_ATTR_UNUSED			///< Function that may be never used
+# define VL_ATTR_UNUSED                 ///< Function that may be never used
 #endif
 #ifndef VL_FUNC
-# define VL_FUNC "__func__"		///< Name of current function for error macros
+# define VL_FUNC "__func__"             ///< Name of current function for error macros
 #endif
 #ifndef VL_CAPABILITY
-# define VL_ACQUIRE(...)		///< Function requires a capability/lock (-fthread-safety)
-# define VL_ACQUIRE_SHARED(...)		///< Function aquires a shared capability/lock (-fthread-safety)
-# define VL_RELEASE(...)		///< Function releases a capability/lock (-fthread-safety)
-# define VL_RELEASE_SHARED(...)		///< Function releases a shared capability/lock (-fthread-safety)
-# define VL_TRY_ACQUIRE(...)		///< Function returns bool if aquired a capability (-fthread-safety)
-# define VL_TRY_ACQUIRE_SHARED(...)	///< Function returns bool if aquired a shared capability (-fthread-safety)
-# define VL_REQUIRES(x)			///< Function requires a capability inbound (-fthread-safety)
-# define VL_EXCLUDES(x)			///< Function requires not having a capability inbound (-fthread-safety)
-# define VL_CAPABILITY(x)		///< Name of capability/lock (-fthread-safety)
-# define VL_GUARDED_BY(x)		///< Name of mutex protecting this variable (-fthread-safety)
-# define VL_SCOPED_CAPABILITY		///< Scoped threaded capability/lock (-fthread-safety)
+# define VL_ACQUIRE(...)                ///< Function requires a capability/lock (-fthread-safety)
+# define VL_ACQUIRE_SHARED(...)         ///< Function aquires a shared capability/lock (-fthread-safety)
+# define VL_RELEASE(...)                ///< Function releases a capability/lock (-fthread-safety)
+# define VL_RELEASE_SHARED(...)         ///< Function releases a shared capability/lock (-fthread-safety)
+# define VL_TRY_ACQUIRE(...)            ///< Function returns bool if aquired a capability (-fthread-safety)
+# define VL_TRY_ACQUIRE_SHARED(...)     ///< Function returns bool if aquired a shared capability (-fthread-safety)
+# define VL_REQUIRES(x)                 ///< Function requires a capability inbound (-fthread-safety)
+# define VL_EXCLUDES(x)                 ///< Function requires not having a capability inbound (-fthread-safety)
+# define VL_CAPABILITY(x)               ///< Name of capability/lock (-fthread-safety)
+# define VL_GUARDED_BY(x)               ///< Name of mutex protecting this variable (-fthread-safety)
+# define VL_SCOPED_CAPABILITY           ///< Scoped threaded capability/lock (-fthread-safety)
 #endif
 #ifndef VL_LIKELY
-# define VL_LIKELY(x)	(!!(x))		///< Boolean expression more often true than false
-# define VL_UNLIKELY(x)	(!!(x))		///< Boolean expression more often false than true
+# define VL_LIKELY(x)   (!!(x))         ///< Boolean expression more often true than false
+# define VL_UNLIKELY(x) (!!(x))         ///< Boolean expression more often false than true
 #endif
+#define VL_UNCOVERABLE(x) VL_UNLIKELY(x)  ///< Boolean expression never hit by users (no coverage)
 #ifndef VL_UNREACHABLE
-# define VL_UNREACHABLE			///< Point that may never be reached
+# define VL_UNREACHABLE                 ///< Point that may never be reached
 #endif
 #ifndef VL_PREFETCH_RD
-# define VL_PREFETCH_RD(p)		///< Prefetch data with read intent
+# define VL_PREFETCH_RD(p)              ///< Prefetch data with read intent
 #endif
 #ifndef VL_PREFETCH_RW
-# define VL_PREFETCH_RW(p)		///< Prefetch data with read/write intent
+# define VL_PREFETCH_RW(p)              ///< Prefetch data with read/write intent
 #endif
 
 #ifdef VL_THREADED
@@ -124,12 +129,12 @@
 # else
 #  error "Unsupported compiler for VL_THREADED: No thread-local declarator"
 # endif
-# define VL_THREAD_LOCAL thread_local	///< Use new C++ static local thread
+# define VL_THREAD_LOCAL thread_local   ///< Use new C++ static local thread
 #else
-# define VL_THREAD_LOCAL		///< Use new C++ static local thread
+# define VL_THREAD_LOCAL                ///< Use new C++ static local thread
 #endif
-#define VL_THREAD			///< Deprecated
-#define VL_STATIC_OR_THREAD static	///< Deprecated
+#define VL_THREAD                       ///< Deprecated
+#define VL_STATIC_OR_THREAD static      ///< Deprecated
 
 #define VL_PURE  ///< Comment tag that Function is pure (and thus also VL_MT_SAFE)
 #define VL_MT_SAFE  ///< Comment tag that function is threadsafe when VL_THREADED
@@ -138,18 +143,18 @@
 #define VL_MT_UNSAFE_ONE  ///< Comment tag that function is not threadsafe when VL_THREADED, protected to make sure single-caller
 
 #ifdef _MSC_VER
-# define VL_ULL(c) (c##ui64)	///< Add appropriate suffix to 64-bit constant
+# define VL_ULL(c) (c##ui64)    ///< Add appropriate suffix to 64-bit constant
 #else
-# define VL_ULL(c) (c##ULL)	///< Add appropriate suffix to 64-bit constant
+# define VL_ULL(c) (c##ULL)     ///< Add appropriate suffix to 64-bit constant
 #endif
 
 // This is not necessarily the same as #UL, depending on what the IData typedef is.
-#define VL_UL(c) (static_cast<IData>(c##UL))	///< Add appropriate suffix to 32-bit constant
+#define VL_UL(c) (static_cast<IData>(c##UL))  ///< Add appropriate suffix to 32-bit constant
 
 #if defined(VL_CPPCHECK) || defined(__clang_analyzer__)
 # define VL_DANGLING(v)
 #else
-# define VL_DANGLING(v) do { (v) = NULL; } while(0)	///< After e.g. delete, set variable to NULL to indicate must not use later
+# define VL_DANGLING(v) do { (v) = NULL; } while(0)  ///< After e.g. delete, set variable to NULL to indicate must not use later
 #endif
 
 //=========================================================================
@@ -180,7 +185,7 @@
 // Optimization
 
 #ifndef VL_INLINE_OPT
-# define VL_INLINE_OPT		///< "inline" if compiling all objects in single compiler run
+# define VL_INLINE_OPT  ///< "inline" if compiling all objects in single compiler run
 #endif
 
 //=========================================================================
@@ -188,56 +193,61 @@
 
 #ifndef VL_WARNINGS
 # ifdef _MSC_VER
-#  pragma warning(disable:4099)	// C4099: type name first seen using 'class' now seen using 'struct' (V3AstNode)
-#  pragma warning(disable:4100)	// C4100: unreferenced formal parameter (L4)
-#  pragma warning(disable:4127)	// C4127: conditional expression is constant (L4)
-#  pragma warning(disable:4146)	// C4146: unary minus operator applied to unsigned type, result still unsigned
-#  pragma warning(disable:4189)	// C4189: local variable is initialized but not referenced (L4)
-#  pragma warning(disable:4244)	// C4244: conversion from 'uint64_t' to 'uint_32_t', possible loss of data
-#  pragma warning(disable:4245)	// C4245: conversion from 'int' to 'unsigned', signed/unsigned mismatch
-#  pragma warning(disable:4996)	// C4996: sscanf/fopen/etc may be unsafe
+#  pragma warning(disable:4099)  // C4099: type name first seen using 'class' now seen using 'struct' (V3AstNode)
+#  pragma warning(disable:4100)  // C4100: unreferenced formal parameter (L4)
+#  pragma warning(disable:4127)  // C4127: conditional expression is constant (L4)
+#  pragma warning(disable:4146)  // C4146: unary minus operator applied to unsigned type, result still unsigned
+#  pragma warning(disable:4189)  // C4189: local variable is initialized but not referenced (L4)
+#  pragma warning(disable:4244)  // C4244: conversion from 'uint64_t' to 'uint_32_t', possible loss of data
+#  pragma warning(disable:4245)  // C4245: conversion from 'int' to 'unsigned', signed/unsigned mismatch
+#  pragma warning(disable:4996)  // C4996: sscanf/fopen/etc may be unsafe
 # endif
 #endif
 
 //=========================================================================
 // Basic integer types
 
+#ifdef __MINGW32__
+# define __USE_MINGW_ANSI_STDIO 1  // Force old MinGW (GCC 5 and older) to use C99 formats
+# define __STDC_FORMAT_MACROS   1  // Otherwise MinGW doesn't get PRId64 for fstapi.c
+#endif
+
 #if defined(__CYGWIN__)
 
 # include <stdint.h>
 # include <sys/types.h>  // __WORDSIZE
 # include <unistd.h>  // ssize_t
-typedef unsigned char           uint8_t;	///< 8-bit unsigned type (backward compatibility)
-typedef unsigned short int      uint16_t;	///< 16-bit unsigned type (backward compatibility)
-typedef unsigned char           vluint8_t;	///< 8-bit unsigned type
-typedef unsigned short int      vluint16_t;	///< 16-bit unsigned type
-# if defined(__uint32_t_defined) || defined(___int32_t_defined)    // Newer Cygwin uint32_t in stdint.h as an unsigned int
-typedef int32_t			vlsint32_t;	///< 32-bit signed type
-typedef uint32_t		vluint32_t;	///< 32-bit unsigned type
-# else				 		// Older Cygwin has long==uint32_t
-typedef unsigned long		uint32_t;	///< 32-bit unsigned type (backward compatibility)
-typedef long			vlsint32_t;	///< 32-bit signed type
-typedef unsigned long		vluint32_t;	///< 32-bit unsigned type
+typedef unsigned char           uint8_t;        ///< 8-bit unsigned type (backward compatibility)
+typedef unsigned short int      uint16_t;       ///< 16-bit unsigned type (backward compatibility)
+typedef unsigned char           vluint8_t;      ///< 8-bit unsigned type
+typedef unsigned short int      vluint16_t;     ///< 16-bit unsigned type
+# if defined(__uint32_t_defined) || defined(___int32_t_defined)  // Newer Cygwin uint32_t in stdint.h as an unsigned int
+typedef int32_t                 vlsint32_t;     ///< 32-bit signed type
+typedef uint32_t                vluint32_t;     ///< 32-bit unsigned type
+# else  // Older Cygwin has long==uint32_t
+typedef unsigned long           uint32_t;       ///< 32-bit unsigned type (backward compatibility)
+typedef long                    vlsint32_t;     ///< 32-bit signed type
+typedef unsigned long           vluint32_t;     ///< 32-bit unsigned type
 # endif
 # if defined(__WORDSIZE) && (__WORDSIZE == 64)
-typedef long			vlsint64_t;	///< 64-bit signed type
-typedef unsigned long		vluint64_t;	///< 64-bit unsigned type
+typedef long                    vlsint64_t;     ///< 64-bit signed type
+typedef unsigned long           vluint64_t;     ///< 64-bit unsigned type
 # else
-typedef long long		vlsint64_t;	///< 64-bit signed type
-typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
+typedef long long               vlsint64_t;     ///< 64-bit signed type
+typedef unsigned long long      vluint64_t;     ///< 64-bit unsigned type
 # endif
 
 #elif defined(_WIN32) && defined(_MSC_VER)
 
-typedef unsigned __int8		uint8_t;	///< 8-bit unsigned type (backward compatibility)
-typedef unsigned __int16	uint16_t;	///< 16-bit unsigned type (backward compatibility)
-typedef unsigned __int32	uint32_t;	///< 32-bit unsigned type (backward compatibility)
-typedef unsigned __int8		vluint8_t;	///< 8-bit unsigned type
-typedef unsigned __int16	vluint16_t;	///< 16-bit unsigned type
-typedef signed   __int32	vlsint32_t;	///< 32-bit signed type
-typedef unsigned __int32	vluint32_t;	///< 32-bit unsigned type
-typedef signed   __int64	vlsint64_t;	///< 64-bit signed type
-typedef unsigned __int64	vluint64_t;	///< 64-bit unsigned type
+typedef unsigned __int8         uint8_t;        ///< 8-bit unsigned type (backward compatibility)
+typedef unsigned __int16        uint16_t;       ///< 16-bit unsigned type (backward compatibility)
+typedef unsigned __int32        uint32_t;       ///< 32-bit unsigned type (backward compatibility)
+typedef unsigned __int8         vluint8_t;      ///< 8-bit unsigned type
+typedef unsigned __int16        vluint16_t;     ///< 16-bit unsigned type
+typedef signed   __int32        vlsint32_t;     ///< 32-bit signed type
+typedef unsigned __int32        vluint32_t;     ///< 32-bit unsigned type
+typedef signed   __int64        vlsint64_t;     ///< 64-bit signed type
+typedef unsigned __int64        vluint64_t;     ///< 64-bit unsigned type
 
 # ifndef _SSIZE_T_DEFINED
 #  ifdef  _WIN64
@@ -247,22 +257,22 @@ typedef signed   __int32        ssize_t;        ///< signed size_t; returned fro
 #  endif
 # endif
 
-#else // Linux or compliant Unix flavors, -m64
+#else  // Linux or compliant Unix flavors, -m64
 
-# include <inttypes.h>	// Solaris
+# include <inttypes.h>  // Solaris
 # include <stdint.h>  // Linux and most flavors
 # include <sys/types.h>  // __WORDSIZE
 # include <unistd.h>  // ssize_t
-typedef uint8_t			vluint8_t;	///< 32-bit unsigned type
-typedef uint16_t		vluint16_t;	///< 32-bit unsigned type
-typedef int			vlsint32_t;	///< 32-bit signed type
-typedef uint32_t		vluint32_t;	///< 32-bit signed type
+typedef uint8_t                 vluint8_t;      ///< 32-bit unsigned type
+typedef uint16_t                vluint16_t;     ///< 32-bit unsigned type
+typedef int                     vlsint32_t;     ///< 32-bit signed type
+typedef uint32_t                vluint32_t;     ///< 32-bit signed type
 # if defined(__WORDSIZE) && (__WORDSIZE == 64)
-typedef long			vlsint64_t;	///< 64-bit signed type
-typedef unsigned long		vluint64_t;	///< 64-bit unsigned type
+typedef long                    vlsint64_t;     ///< 64-bit signed type
+typedef unsigned long           vluint64_t;     ///< 64-bit unsigned type
 # else
-typedef long long		vlsint64_t;	///< 64-bit signed type
-typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
+typedef long long               vlsint64_t;     ///< 64-bit signed type
+typedef unsigned long long      vluint64_t;     ///< 64-bit unsigned type
 # endif
 #endif
 
@@ -270,9 +280,10 @@ typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
 // Printing printf/scanf formats
 // Alas cinttypes isn't that standard yet
 
-#ifdef _WIN32
+// Use Microsoft-specific format specifiers for Microsoft Visual C++ only
+#ifdef _MSC_VER
 # define VL_PRI64 "I64"
-#else // Linux or compliant Unix flavors
+#else  // use standard C99 format specifiers
 # if defined(__WORDSIZE) && (__WORDSIZE == 64)
 #  define VL_PRI64 "l"
 # else
@@ -297,18 +308,18 @@ typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
 
 #ifdef _WIN32
 # define VL_DEV_NULL "nul"
-#else // Linux or compliant Unix flavors
+#else  // Linux or compliant Unix flavors
 # define VL_DEV_NULL "/dev/null"
 #endif
 
 //=========================================================================
 // Integer size macros
 
-#define VL_BYTESIZE 8			///< Bits in a byte
-#define VL_SHORTSIZE 16			///< Bits in a short
-#define VL_WORDSIZE 32			///< Bits in a word
-#define VL_QUADSIZE 64			///< Bits in a quadword
-#define VL_WORDSIZE_LOG2 5		///< log2(VL_WORDSIZE)
+#define VL_BYTESIZE 8                   ///< Bits in a byte
+#define VL_SHORTSIZE 16                 ///< Bits in a short
+#define VL_WORDSIZE 32                  ///< Bits in a word
+#define VL_QUADSIZE 64                  ///< Bits in a quadword
+#define VL_WORDSIZE_LOG2 5              ///< log2(VL_WORDSIZE)
 
 /// Bytes this number of bits needs (1 bit=1 byte)
 #define VL_BYTES_I(nbits) (((nbits)+(VL_BYTESIZE-1))/VL_BYTESIZE)
@@ -326,24 +337,24 @@ typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
 //=========================================================================
 // Verilated function size macros
 
-#define VL_MULS_MAX_WORDS 16		///< Max size in words of MULS operation
-#define VL_TO_STRING_MAX_WORDS 64	///< Max size in words of String conversion operation
+#define VL_MULS_MAX_WORDS 16            ///< Max size in words of MULS operation
+#define VL_TO_STRING_MAX_WORDS 64       ///< Max size in words of String conversion operation
 
 //=========================================================================
 // Base macros
 
-#define VL_SIZEBITS_I (VL_WORDSIZE-1)	///< Bit mask for bits in a word
-#define VL_SIZEBITS_Q (VL_QUADSIZE-1)	///< Bit mask for bits in a quad
+#define VL_SIZEBITS_I (VL_WORDSIZE-1)   ///< Bit mask for bits in a word
+#define VL_SIZEBITS_Q (VL_QUADSIZE-1)   ///< Bit mask for bits in a quad
 
 /// Mask for words with 1's where relevant bits are (0=all bits)
 #define VL_MASK_I(nbits)  (((nbits) & VL_SIZEBITS_I) \
-			 ? ((1U << ((nbits) & VL_SIZEBITS_I) )-1) : ~0)
+                         ? ((1U << ((nbits) & VL_SIZEBITS_I) )-1) : ~0)
 /// Mask for quads with 1's where relevant bits are (0=all bits)
 #define VL_MASK_Q(nbits)  (((nbits) & VL_SIZEBITS_Q) \
-			 ? ((VL_ULL(1) << ((nbits) & VL_SIZEBITS_Q) )-VL_ULL(1)) : VL_ULL(~0))
-#define VL_BITWORD_I(bit)	((bit)/VL_WORDSIZE)	///< Word number for a wide quantity
-#define VL_BITBIT_I(bit)	((bit)&VL_SIZEBITS_I)	///< Bit number for a bit in a long
-#define VL_BITBIT_Q(bit)	((bit)&VL_SIZEBITS_Q)	///< Bit number for a bit in a quad
+                         ? ((VL_ULL(1) << ((nbits) & VL_SIZEBITS_Q) )-VL_ULL(1)) : VL_ULL(~0))
+#define VL_BITWORD_I(bit) ((bit)/VL_WORDSIZE)  ///< Word number for a wide quantity
+#define VL_BITBIT_I(bit) ((bit)&VL_SIZEBITS_I)  ///< Bit number for a bit in a long
+#define VL_BITBIT_Q(bit) ((bit)&VL_SIZEBITS_Q)  ///< Bit number for a bit in a quad
 
 //=========================================================================
 // Floating point
@@ -396,4 +407,4 @@ typedef unsigned long long	vluint64_t;	///< 64-bit unsigned type
 
 //=========================================================================
 
-#endif /*guard*/
+#endif  // Guard

internals.pod

@@ -302,7 +302,7 @@ serial mode; that is a possible area for improvement.)
 
 =item C<Wave Scheduling>
 
-To allow the verilated model to run in parallel with the testbench, it
+To allow the Verilated model to run in parallel with the testbench, it
 might be nice to support "wave" scheduling, in which work on a cycle begins
 before eval() is called or continues after eval() returns.  For now all
 work on a cycle happens during the eval() call, leaving Verilator's threads
@@ -452,10 +452,10 @@ implementation is not found, the system will look in turn for overloaded
 implementations up the inheritance hierarchy. For example calling C<accept>
 on C<AstIf> will look in turn for:
 
-  void visit (AstIf* nodep)
-  void visit (AstNodeIf* nodep)
-  void visit (AstNodeStmt* nodep)
-  void visit (AstNode* nodep)
+  void visit(AstIf* nodep)
+  void visit(AstNodeIf* nodep)
+  void visit(AstNodeStmt* nodep)
+  void visit(AstNode* nodep)
 
 There are three ways data is passed between visitor functions.
 
@@ -826,7 +826,7 @@ level. For example after inlining:
 
 The textual name of this node AST type (always in capitals). Many of these
 correspond directly to Verilog entities (for example C<MODULE> and
-C<TASK>), but others are internal to Verialtor (for example C<NETLIST> and
+C<TASK>), but others are internal to Verilator (for example C<NETLIST> and
 C<BASICDTYPE>).
 
 =item Address of the node
@@ -997,7 +997,7 @@ in C<src/Makefile_obj.in> and reconfigure.
 
 The latest version is available from L<http://www.veripool.org/>.
 
-Copyright 2008-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2008-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

nodist/bisondiff

@@ -1,7 +1,7 @@
 #!/usr/bin/perl -w
 ######################################################################
 #
-# Copyright 2007-2018 by Wilson Snyder.  This package is free software; you
+# Copyright 2007-2019 by Wilson Snyder.  This package is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -23,9 +23,9 @@ our $Debug;
 our $Opt_Unsup;
 
 if (! GetOptions (
-	  #"help"	=> \&usage,
-	  "debug"	=> sub { $Debug = 1; },
-	  "unsup!"	=> \$Opt_Unsup,		# Ignore unsupported
+          #"help"       => \&usage,
+          "debug"       => sub { $Debug = 1; },
+          "unsup!"      => \$Opt_Unsup,  # Ignore unsupported
     )) {
     die "usage();"
 }
@@ -59,24 +59,24 @@ sub prep {
     my $rule = "";
     my $skip = 1;
     while (defined(my $line = $fh->getline)) {
-	if ($skip == 1) {
-	    next if $line !~ /%token/;
-	    $skip = 2;
-	}
+        if ($skip == 1) {
+            next if $line !~ /%token/;
+            $skip = 2;
+        }
 
-	if ($Opt_Unsup) {
-	    $line =~ s!//UNSUP!|!g;
-	    $line =~ s!(\s+)\|(\s+)!$1$2!g;  # As "UNSUP" often replaces "|"
-	}
+        if ($Opt_Unsup) {
+            $line =~ s!//UNSUP!|!g;
+            $line =~ s!(\s+)\|(\s+)!$1$2!g;  # As "UNSUP" often replaces "|"
+        }
 
-	# %type<foo>
-	$line =~ s/^(%\S+)<(\S+)>/$1/;
-	# rule<foo>
-	$line =~ s/^([a-zA-Z0-9_]+)<\S+>:/$1:/;
-	# Productions
-	$line =~ s/[ \t]{[^}]*?}/\t{}/g;
+        # %type<foo>
+        $line =~ s/^(%\S+)<(\S+)>/$1/;
+        # rule<foo>
+        $line =~ s/^([a-zA-Z0-9_]+)<\S+>:/$1:/;
+        # Productions
+        $line =~ s/[ \t]{[^}]*?}/\t{}/g;
 
-	$fho->print($line);
+        $fho->print($line);
     }
 }
 

nodist/bisonreader

@@ -1,7 +1,7 @@
 #!/usr/bin/perl -w
 ######################################################################
 #
-# Copyright 2007-2018 by Wilson Snyder.  This package is free software; you
+# Copyright 2007-2019 by Wilson Snyder.  This package is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -32,27 +32,27 @@ foreach my $line (<STDIN>) {
     $line =~ s!\s+! !g;
     next if $line eq '';
     if ($line =~ m!^\%\%!) {
-	$body++;
+        $body++;
     } elsif ($body == 1) {
-	$rule .= $line;
-	if ($line =~ m!^\s*;\s*$!) {
-	    #print "Rule: $rule\n";
-	    ($rule =~ /^([a-zA-Z0-9_]+)(<\S+>)?:(.*)$/) or die "%Error: No rule name: $1\n";
-	    my $rulename = $1; my $preaction = $3;
-	    $declared{$rulename} = $lineno;
-	    $preaction =~ s/\{[^\}]*\}/ /g;
-	    #print "RULEN $rulename PA $preaction\n" if $Debug;
-	    $rule = '';
-	    foreach my $ref (split /\s+/, $preaction) {
-		next if $ref !~ /^[a-zA-Z]/;
-		next if $ref eq $rulename;
-		if (!$used{$ref} && $declared{$ref}) {
-		    print "   %Warning: $lineno: $ref used by $rulename after declaration\n";
-		}
-		$used{$ref} = $lineno;
-		print "  ref $ref\n" if $Debug;
-	    }
-	}
+        $rule .= $line;
+        if ($line =~ m!^\s*;\s*$!) {
+            #print "Rule: $rule\n";
+            ($rule =~ /^([a-zA-Z0-9_]+)(<\S+>)?:(.*)$/) or die "%Error: No rule name: $1\n";
+            my $rulename = $1; my $preaction = $3;
+            $declared{$rulename} = $lineno;
+            $preaction =~ s/\{[^\}]*\}/ /g;
+            #print "RULEN $rulename PA $preaction\n" if $Debug;
+            $rule = '';
+            foreach my $ref (split /\s+/, $preaction) {
+                next if $ref !~ /^[a-zA-Z]/;
+                next if $ref eq $rulename;
+                if (!$used{$ref} && $declared{$ref}) {
+                    print "   %Warning: $lineno: $ref used by $rulename after declaration\n";
+                }
+                $used{$ref} = $lineno;
+                print "  ref $ref\n" if $Debug;
+            }
+        }
     }
 }
 

nodist/code_coverage

@@ -0,0 +1,263 @@
+#!/usr/bin/perl -w
+# See copyright, etc in below POD section.
+######################################################################
+
+use Cwd;
+use File::Copy qw(cp);
+use File::Path qw(mkpath);
+use Getopt::Long;
+use IO::File;
+use Pod::Usage;
+use strict;
+use vars qw($Debug);
+
+our $Exclude_Line_Regexp;
+our @Remove_Sources;
+our @Source_Globs;
+
+#======================================================================
+# main
+
+our $Opt_Stage = 0;
+
+autoflush STDOUT 1;
+autoflush STDERR 1;
+Getopt::Long::config("no_auto_abbrev");
+if (! GetOptions(
+          "debug"       => sub { $Debug = 1; },
+          "<>"          => sub { die "%Error: Unknown parameter: $_[0]\n"; },
+          "stage=i"     => \$Opt_Stage,
+    )) {
+    die "%Error: Bad usage, try 'install_test --help'\n";
+}
+
+test();
+exit(0);
+
+#######################################################################
+
+sub test {
+    -r "nodist/code_coverage.dat" or die "%Error: Run from the top of the verilator kit,";
+    require "./nodist/code_coverage.dat";
+
+    if ($Opt_Stage <= 0) {
+        print "Stage 0: configure (coverage on)\n";
+        run("make distclean");
+        run("./configure --enable-longtests CXX='g++ --coverage'");
+        run("make -k");
+        # The optimized versions will not collect good coverage, overwrite them
+        run("cp bin/verilator_bin_dbg bin/verilator_bin");
+        run("cp bin/verilator_coverage_bin_dbg bin/verilator_coverage_bin");
+    }
+
+    if ($Opt_Stage <= 1) {
+        print "Stage 1: make examples (with coverage on)\n";
+        run("make examples");
+        run("make test_regress");
+    }
+
+    my $cc_dir = "nodist/obj_dir/coverage";
+    if ($Opt_Stage <= 2) {
+        print "Stage 2: Create info files under $cc_dir\n";
+        mkpath($cc_dir);
+        mkpath("$cc_dir/info");
+        my $dats = `find . -print | grep .gcda`;
+        my %dirs;
+        foreach my $dat (split '\n', $dats) {
+            $dat =~ s!/[^/]+$!!;
+            $dirs{$dat} = 1;
+        }
+        foreach my $dir (sort keys %dirs) {
+            (my $outname = $dir) =~ s![^a-zA-Z0-9]+!_!g;
+            run("cd $cc_dir/info ; lcov -c -d ../../../../$dir -o app_test_${outname}.info");
+        }
+    }
+
+    if ($Opt_Stage <= 3) {
+        # lcov doesn't have a control file to override single lines, so replicate the sources
+        print "Stage 3: Clone sources under $cc_dir\n";
+        clone_sources($cc_dir);
+    }
+
+    if ($Opt_Stage <= 4) {
+        print "Stage 4: Copy .gcno files\n";
+        my $dats = `find . -print | grep .gcno`;
+        foreach my $dat (split '\n', $dats) {
+            next if $dat =~ /$cc_dir/;
+            my $outdat = $cc_dir."/".$dat;
+            #print "cp $dat, $outdat);\n";
+            cp($dat, $outdat);
+        }
+    }
+
+    if ($Opt_Stage <= 5) {
+        print "Stage 5: Combine data files\n";
+        run("cd $cc_dir ; lcov -c -i -d src/obj_dbg -o app_base.info");
+        run("cd $cc_dir ; lcov -a app_base.info -o app_total.info");
+        my $infos = `cd $cc_dir ; find info -print | grep .info`;
+        my $comb = "";
+        my @infos = (split /\n/, $infos);
+        foreach my $info (@infos) {
+            $comb .= " -a $info";
+            # Need to batch them to avoid overrunning shell command length limit
+            if (length($comb) > 10000 || $info eq $infos[$#infos]) {
+                run("cd $cc_dir ; lcov -a app_total.info $comb -o app_total.info");
+                $comb = "";
+            }
+        }
+    }
+
+    if ($Opt_Stage <= 6) {
+        print "Stage 6: Filter processed source files\n";
+        my $cmd = '';
+        foreach my $glob (@Remove_Sources) {
+            $cmd .= " '$glob'";
+        }
+        run("cd $cc_dir ; lcov --remove app_total.info $cmd -o app_total.info");
+    }
+
+    if ($Opt_Stage <= 7) {
+        print "Stage 7: Create HTML\n";
+        cleanup_abs_paths($cc_dir, "$cc_dir/app_total.info", "$cc_dir/app_total.info");
+        run("cd $cc_dir ; genhtml app_total.info --demangle-cpp"
+            ." --rc lcov_branch_coverage=1 --rc genhtml_hi_limit=100 --output-directory html");
+    }
+
+    if ($Opt_Stage <= 9) {
+        print "*-* All Finished *-*\n";
+    }
+}
+
+sub clone_sources {
+    my $cc_dir = shift;
+    my $excluded_lines = 0;
+    foreach my $glob (@Source_Globs) {
+        foreach my $infile (glob $glob) {
+            $infile !~ m!^/!
+                or die "%Error: source globs should be relative not absolute filenames,";
+            my $outfile = $cc_dir."/".$infile;
+            (my $outpath = $outfile) =~ s!/[^/]*$!!;
+            mkpath($outpath);
+            my $fh = IO::File->new("<$infile") or die "%Error: $! $infile,";
+            my $ofh = IO::File->new(">$outfile") or die "%Error: $! $outfile,";
+            my $lineno = 0;
+            while (defined(my $line = $fh->getline)) {
+                $lineno++;
+                chomp $line;
+                if ($line !~ m!// LCOV_EXCL_LINE!
+                    && $line =~ /$Exclude_Line_Regexp/) {
+                    $line .= "  //code_coverage: // LCOV_EXCL_LINE";
+                    $excluded_lines++;
+                    #print "$infile:$lineno: $line";
+                } else {
+                }
+                $ofh->print("$line\n");
+            }
+        }
+    }
+    print "Source code lines automatically LCOV_EXCL_LINE'ed: $excluded_lines\n";
+}
+
+sub cleanup_abs_paths {
+    my $cc_dir = shift;
+    my $infile = shift;
+    my $outfile = shift;
+    my $fh = IO::File->new("<$infile") or die "%Error: $! $infile,";
+    my @lines;
+    while (defined(my $line = $fh->getline)) {
+        if ($line =~ m!^SF:!) {
+            $line =~ s!$ENV{VERILATOR_ROOT}/!!;
+            $line =~ s!$cc_dir/!!;
+            $line =~ s!obj_dbg/verilog.y$!verilog.y!;
+            #print "Remaining SF: ",$line;
+        }
+        push @lines, $line;
+    }
+    my $ofh = IO::File->new(">$outfile") or die "%Error: $! $outfile,";
+    $ofh->print(@lines);
+}
+
+#######################################################################
+# .dat file callbacks
+
+sub exclude_line_regexp {
+    $Exclude_Line_Regexp = shift;
+}
+
+sub remove_source {
+    my @srcs = @_;
+    push @Remove_Sources, @srcs;
+}
+
+sub source_globs {
+    my @dirs = @_;
+    push @Source_Globs, @dirs;
+}
+
+#######################################################################
+
+sub run {
+    # Run a system command, check errors
+    my $command = shift;
+    print "\t$command\n";
+    system "$command";
+    my $status = $?;
+    ($status == 0) or die "%Error: Command Failed $command, $status, stopped";
+}
+
+#######################################################################
+__END__
+
+=pod
+
+=head1 NAME
+
+code_coverage - Build and collect Verilator coverage
+
+=head1 SYNOPSIS
+
+  cd $VERILATOR_ROOT
+  nodist/code_coverage
+
+=head1 DESCRIPTION
+
+code_coverage builds Verilator with C++ coverage support and runs tests
+with coverage enabled.
+
+This will rebuild the current object files.
+
+=head1 ARGUMENTS
+
+=over 4
+
+=item --help
+
+Displays this message and program version and exits.
+
+=item -stage I<stage>
+
+Runs a specific stage (see the script).
+
+=back
+
+=head1 DISTRIBUTION
+
+Copyright 2019-2019 by Wilson Snyder.  This package is free software; you
+can redistribute it and/or modify it under the terms of either the GNU
+Lesser General Public License Version 3 or the Perl Artistic License
+Version 2.0.
+
+=head1 AUTHORS
+
+Wilson Snyder <[email protected]>
+
+=head1 SEE ALSO
+
+C<lcov>
+
+=cut
+
+######################################################################
+### Local Variables:
+### compile-command: "cd .. ; nodist/code_coverage "
+### End:

nodist/code_coverage.dat

@@ -0,0 +1,42 @@
+# -*- Perl -*-
+# DESCRIPTION: Verilator: Internal C++ code lcov control file
+#
+# Copyright 2019-2019 by Wilson Snyder. This program is free software; you can
+# redistribute it and/or modify it under the terms of either the GNU
+# Lesser General Public License Version 3 or the Perl Artistic License
+# Version 2.0.
+
+source_globs("src/*.cpp",
+             "src/*.h",
+             "src/*.l",
+             "src/*.y",
+             "src/obj_dbg/*.h",
+             "src/obj_dbg/*.cpp",
+             "include/*.c",
+             "include/*.cpp",
+             "include/*.h",
+             "include/*/*.h",
+             "include/*/*.cpp",
+             "include/*/*.c",
+    );
+
+remove_source("/usr/include/*");
+remove_source("*/include/sysc/*");
+remove_source("*/V3ClkGater.cpp");
+remove_source("*/V3ClkGater.h");
+remove_source("*/V3GraphDfa.cpp");
+remove_source("*/V3GraphDfa.h");
+remove_source("*/V3Lexer_pregen.yy.cpp");
+remove_source("*/V3PreLex_pregen.yy.cpp");
+remove_source("*/verilog.c");
+remove_source("*include/gtkwave/*");
+# Something wrong in generation, unfortunately as would like this
+#genhtml: ERROR: cannot read /svaha/wsnyder/SandBox/homecvs/v4/verilator/src/obj_dbg/verilog.y
+#remove_source("*/src/obj_dbg/verilog.y");
+remove_source("*test_regress/*");
+remove_source("*examples/*");
+
+
+exclude_line_regexp(qr/(\bv3fatalSrc\b|\bVL_UNCOVERABLE\b)/);
+
+1;

nodist/dot_importer

@@ -8,7 +8,7 @@ use IO::File;
 use Pod::Usage;
 use Data::Dumper; $Data::Dumper::Indent=1;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 
@@ -24,22 +24,22 @@ $Debug = 0;
 my $opt_filename;
 autoflush STDOUT 1;
 autoflush STDERR 1;
-if (! GetOptions (
-		  "help"	=> \&usage,
-		  "debug"	=> \&debug,
-		  "<>"		=> \&parameter,
-		  )) {
+if (! GetOptions(
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          "<>"          => \&parameter,
+    )) {
     usage();
 }
 
-dotread ($opt_filename);
+dotread($opt_filename);
 cwrite("graph_export.cpp");
 
 #----------------------------------------------------------------------
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub debug {
@@ -49,9 +49,9 @@ sub debug {
 sub parameter {
     my $param = shift;
     if (!$opt_filename) {
-	$opt_filename = $param;
+        $opt_filename = $param;
     } else {
-	die "%Error: Unknown parameter: $param\n";
+        die "%Error: Unknown parameter: $param\n";
     }
 }
 
@@ -64,30 +64,30 @@ sub dotread {
     my $header = 1;
     my $vnum = 0;
     while (defined (my $line = $fh->getline)) {
-	if ($line =~ /^\t([a-zA-Z0-9_]+)\t(.*)$/) {
-	    next if $1 eq 'nTITLE';
-	    $header = 0;
-	    $Vertexes{$1} = {num => $vnum++,
-			     line => $line,
-			     name => $1,};
-	}
-	elsif ($line =~ /^\t([a-zA-Z0-9_]+)\s+->\s+([a-zA-Z0-9_]+)\s+(.*)$/) {
-	    my $from=$1; my $to=$2;
-	    my $weight = 1; $weight = $1 if $line =~ /weight=(\d+)/;
-	    my $cutable = undef; $cutable = $1 if $line =~ /style=(\S+)/;
-	    my $edge =  {num => $vnum++,
-			 line => $line,
-			 weight => $weight,
-			 cutable => $cutable,
-			 from => $from,
-			 to => $to,};
-	    push @Edges, $edge;
-	    $Edges{$from}{$to} = $edge;
-	}
-	elsif ($header) {
-	    push @Header, $line;
-	    print "IGNORE: $line";
-	}
+        if ($line =~ /^\t([a-zA-Z0-9_]+)\t(.*)$/) {
+            next if $1 eq 'nTITLE';
+            $header = 0;
+            $Vertexes{$1} = {num => $vnum++,
+                             line => $line,
+                             name => $1,};
+        }
+        elsif ($line =~ /^\t([a-zA-Z0-9_]+)\s+->\s+([a-zA-Z0-9_]+)\s+(.*)$/) {
+            my $from=$1; my $to=$2;
+            my $weight = 1; $weight = $1 if $line =~ /weight=(\d+)/;
+            my $cutable = undef; $cutable = $1 if $line =~ /style=(\S+)/;
+            my $edge =  {num => $vnum++,
+                         line => $line,
+                         weight => $weight,
+                         cutable => $cutable,
+                         from => $from,
+                         to => $to,};
+            push @Edges, $edge;
+            $Edges{$from}{$to} = $edge;
+        }
+        elsif ($header) {
+            push @Header, $line;
+            print "IGNORE: $line";
+        }
     }
 }
 
@@ -100,14 +100,14 @@ sub cwrite {
     $fh->print("void V3GraphTestImport::dotImport() {\n");
     $fh->print("    DfaGraph* gp = &m_graph;\n");
     foreach my $ver (sort {$a->{num} <=> $b->{num}} (values %Vertexes)) {
-	$fh->printf("    V3GraphTestVertex* %s = new V3GraphTestVertex(gp, \"%s\");  if (%s) {}\n",
-		    $ver->{name}, $ver->{name}, $ver->{name});
+        $fh->printf("    V3GraphTestVertex* %s = new V3GraphTestVertex(gp, \"%s\");  if (%s) {}\n",
+                    $ver->{name}, $ver->{name}, $ver->{name});
     }
     $fh->print("\n");
     foreach my $edge (@Edges) {
-	$fh->printf("    new V3GraphEdge(gp, %s, %s, %s, %s);\n",
-		    $edge->{from}, $edge->{to},
-		    $edge->{weight}, $edge->{cutable}?"true":"false");
+        $fh->printf("    new V3GraphEdge(gp, %s, %s, %s, %s);\n",
+                    $edge->{from}, $edge->{to},
+                    $edge->{weight}, $edge->{cutable}?"true":"false");
     }
     $fh->print("}\n");
 }
@@ -143,7 +143,7 @@ Displays this message and program version and exits.
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2005-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

nodist/dot_pruner

@@ -8,7 +8,7 @@ use IO::File;
 use Pod::Usage;
 use Data::Dumper; $Data::Dumper::Indent=1;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 
@@ -26,16 +26,16 @@ my $opt_filename;
 my $opt_circle;
 autoflush STDOUT 1;
 autoflush STDERR 1;
-if (! GetOptions (
-		  "help"	=> \&usage,
-		  "debug"	=> \&debug,
-		  "<>"		=> \&parameter,
-		  "circle=s"	=> \$opt_circle,
-		  )) {
+if (! GetOptions(
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          "<>"          => \&parameter,
+          "circle=s"    => \$opt_circle,
+    )) {
     usage();
 }
 
-dotread ($opt_filename);
+dotread($opt_filename);
 circle($opt_circle) if $opt_circle;
 simplify();
 dotwrite();
@@ -44,7 +44,7 @@ dotwrite();
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub debug {
@@ -54,9 +54,9 @@ sub debug {
 sub parameter {
     my $param = shift;
     if (!$opt_filename) {
-	$opt_filename = $param;
+        $opt_filename = $param;
     } else {
-	die "%Error: Unknown parameter: $param\n";
+        die "%Error: Unknown parameter: $param\n";
     }
 }
 
@@ -68,16 +68,16 @@ sub dotread {
     my $fh = IO::File->new($filename) or die "%Error: $! $filename,";
     my $header = 1;
     while (defined (my $line = $fh->getline)) {
-	if ($line =~ /^\t([a-zA-Z0-9_]+)\t(.*)$/) {
-	    $header = 0;
-	    $Vertexes{$1} = $2;
-	}
-	elsif ($line =~ /^\t([a-zA-Z0-9_]+)\s+->\s+([a-zA-Z0-9_]+)\s+(.*)$/) {
-	    $Edges{$1}{$2} = $3;
-	}
-	elsif ($header) {
-	    push @Header, $line;
-	}
+        if ($line =~ /^\t([a-zA-Z0-9_]+)\t(.*)$/) {
+            $header = 0;
+            $Vertexes{$1} = $2;
+        }
+        elsif ($line =~ /^\t([a-zA-Z0-9_]+)\s+->\s+([a-zA-Z0-9_]+)\s+(.*)$/) {
+            $Edges{$1}{$2} = $3;
+        }
+        elsif ($header) {
+            push @Header, $line;
+        }
     }
 }
 
@@ -85,12 +85,12 @@ sub dotread {
 
 sub simplify {
     foreach my $ver (sort (keys %Vertexes)) {
-	$Vertexes{$ver} = _simplify($Vertexes{$ver});
+        $Vertexes{$ver} = _simplify($Vertexes{$ver});
     }
     foreach my $v1 (sort (keys %Edges)) {
-	foreach my $v2 (sort (keys %{$Edges{$v1}})) {
-	    $Edges{$v1}{$v2} = _simplify($Edges{$v1}{$v2});
-	}
+        foreach my $v2 (sort (keys %{$Edges{$v1}})) {
+            $Edges{$v1}{$v2} = _simplify($Edges{$v1}{$v2});
+        }
     }
 }
 
@@ -103,15 +103,15 @@ sub _simplify {
 
 sub dotwrite {
     foreach my $line (@Header) {
-	print "$line";
+        print "$line";
     }
     foreach my $ver (sort (keys %Vertexes)) {
-	print "\t$ver\t$Vertexes{$ver}\n";
+        print "\t$ver\t$Vertexes{$ver}\n";
     }
     foreach my $v1 (sort (keys %Edges)) {
-	foreach my $v2 (sort (keys %{$Edges{$v1}})) {
-	    print "\t$v1 -> $v2\t$Edges{$v1}{$v2}\n";
-	}
+        foreach my $v2 (sort (keys %{$Edges{$v1}})) {
+            print "\t$v1 -> $v2\t$Edges{$v1}{$v2}\n";
+        }
     }
     print "}\n";
 }
@@ -125,15 +125,15 @@ sub circle {
     _circle_recurse($node, 1);
 
     foreach my $ver (keys %Vertexes) {
-	if (!$User{$ver}) {
-	    delete $Vertexes{$ver};
-	    delete $Edges{$ver};
-	}
+        if (!$User{$ver}) {
+            delete $Vertexes{$ver};
+            delete $Edges{$ver};
+        }
     }
     foreach my $v1 (sort (keys %Edges)) {
-	foreach my $v2 (sort (keys %{$Edges{$v1}})) {
-	    if (!$Vertexes{$v2}) { delete $Edges{$v1}{$v2}; }
-	}
+        foreach my $v2 (sort (keys %{$Edges{$v1}})) {
+            if (!$Vertexes{$v2}) { delete $Edges{$v1}{$v2}; }
+        }
     }
 }
 
@@ -148,7 +148,7 @@ sub _circle_recurse {
     $User2{$node} = 1;
     my $r = 0;
     foreach my $v2 (keys %{$Edges{$node}}) {
-	$r |= _circle_recurse($v2,$level++)||0;
+        $r |= _circle_recurse($v2,$level++)||0;
     }
     $User{$node} = 1 if $r;
     $User2{$node} = 2;
@@ -184,7 +184,7 @@ Displays this message and program version and exits.
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2005-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

nodist/flexdiff

@@ -1,7 +1,7 @@
 #!/usr/bin/perl -w
 ######################################################################
 #
-# Copyright 2007-2018 by Wilson Snyder.  This package is free software; you
+# Copyright 2007-2019 by Wilson Snyder.  This package is free software; you
 # can redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -47,12 +47,12 @@ sub prep {
     my @lines;
 
     while (defined(my $line = $fh->getline)) {
-	# Productions
-	#$line =~ s/[ \t]{[^}]*?}/\t{}/g;
-	$line =~ s/StashPrefix;//g;
-	$line =~ s/VALTEXT;//g;
-	$line =~ s/CALLBACK\([^)]*\);//g;
-	push @lines, $line;
+        # Productions
+        #$line =~ s/[ \t]{[^}]*?}/\t{}/g;
+        $line =~ s/StashPrefix;//g;
+        $line =~ s/VALTEXT;//g;
+        $line =~ s/CALLBACK\([^)]*\);//g;
+        push @lines, $line;
     }
 
     #@lines = sort @lines;

nodist/git_untabify

@@ -8,7 +8,7 @@ use IO::File;
 use IO::Dir;
 use Pod::Usage;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 our $VERSION = '0.001';
 our $Opt_Widen = 1;
@@ -18,7 +18,7 @@ our $Opt_Widen = 1;
 
 autoflush STDOUT 1;
 autoflush STDERR 1;
-Getopt::Long::config ("no_auto_abbrev");
+Getopt::Long::config("no_auto_abbrev");
 if (! GetOptions (
           "debug"       => sub { $Debug = 1; },
           "help"        => sub { print "Version $VERSION\n";
@@ -87,20 +87,35 @@ sub find_edits {
         my $hunk = $editlines->{$lineno}{hunk};
         $hunk_lastlines{$hunk} ||= $lineno if $editlines->{$lineno}{user_edit};
     }
-    # Expand to always untabify at least 3 lines (so that future diff will
-    # have non-tabs within a edit hunk distance
-    foreach my $hunk (keys %hunk_firstlines) {
-        if ($hunk_firstlines{$hunk} == $hunk_lastlines{$hunk}) {
-            --$hunk_firstlines{$hunk};
-            ++$hunk_lastlines{$hunk};
+
+    if ($Opt_Widen) {
+        # Expand to include }'s that finish basic block
+        foreach my $hunk (keys %hunk_lastlines) {
+            while (my $lineno = $hunk_lastlines{$hunk}) {
+                ++$lineno;
+                if (($editlines->{$lineno}{line} || "")
+                    =~ /^[+ ]\s+}[ \t};]*$/) {
+                    $hunk_lastlines{$hunk} = $lineno;
+                } else {
+                    last;
+                }
+            }
         }
-        elsif ($hunk_firstlines{$hunk}+1 == $hunk_lastlines{$hunk}) {
-            ++$hunk_lastlines{$hunk};
+        # Expand to always untabify at least 3 lines (so that future diff will
+        # have non-tabs within a edit hunk distance
+        foreach my $hunk (keys %hunk_firstlines) {
+            if ($hunk_firstlines{$hunk} == $hunk_lastlines{$hunk}) {
+                --$hunk_firstlines{$hunk};
+                ++$hunk_lastlines{$hunk};
+            }
+            elsif ($hunk_firstlines{$hunk}+1 == $hunk_lastlines{$hunk}) {
+                ++$hunk_lastlines{$hunk};
+            }
         }
     }
 
     foreach my $lineno (sort {$a <=> $b} keys %$editlines) {
-        if ($editlines->{$lineno}{line} =~ /\t/) {
+        if (($editlines->{$lineno}{line}||"") =~ /\t/) {
             my $hunk = $editlines->{$lineno}{hunk};
             if ($hunk_firstlines{$hunk} <= $lineno && $hunk_lastlines{$hunk} >= $lineno) {
                 $editlines->{$lineno}{editit} = 1;
@@ -117,7 +132,7 @@ sub edit_file {
     foreach my $lineno (sort {$a <=> $b} keys %$editlines) {
         push @editits, $lineno if $editlines->{$lineno}{editit};
     }
-    
+
     return if $#editits < 0;
     if (ignore($filename)) {
         print "%Warning: Ignoring $filename\n";
@@ -219,7 +234,7 @@ Displays program version and exits.
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2005-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

nodist/install_test

@@ -7,7 +7,7 @@ use Cwd;
 use IO::File;
 use Pod::Usage;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 # main
@@ -17,12 +17,12 @@ our $Opt_Jobs = calc_jobs();
 
 autoflush STDOUT 1;
 autoflush STDERR 1;
-Getopt::Long::config ("no_auto_abbrev");
-if (! GetOptions (
-	  "debug"	=> sub { $Debug = 1; },
-	  "<>"		=> sub { die "%Error: Unknown parameter: $_[0]\n"; },
-	  "stage=i"	=> \$Opt_Stage,
-	  "j=i"		=> \$Opt_Jobs,
+Getopt::Long::config("no_auto_abbrev");
+if (! GetOptions(
+          "debug"       => sub { $Debug = 1; },
+          "<>"          => sub { die "%Error: Unknown parameter: $_[0]\n"; },
+          "stage=i"     => \$Opt_Stage,
+          "j=i"         => \$Opt_Jobs,
     )) {
     die "%Error: Bad usage, try 'install_test --help'\n";
 }
@@ -46,51 +46,51 @@ sub test {
     my $testdirn= $srcdir."/test_regress/obj_dir/install_test_testn";
 
     if ($Opt_Stage <= 0) {
-	run("/bin/rm -rf $blddir");
-	run("/bin/mkdir -p $blddir");
-	run("cd $blddir && $srcdir/configure --prefix $prefix");
-	run("cd $blddir && make -j $Opt_Jobs");
+        run("/bin/rm -rf $blddir");
+        run("/bin/mkdir -p $blddir");
+        run("cd $blddir && $srcdir/configure --prefix $prefix");
+        run("cd $blddir && make -j $Opt_Jobs");
     }
 
     # Install it under the prefix
     if ($Opt_Stage <= 1) {
-	run("/bin/rm -rf $prefix");
-	run("/bin/mkdir -p $prefix");
-	run("cd $blddir && make install");
-	run("test -e $prefix/share/man/man1/verilator.1");
+        run("/bin/rm -rf $prefix");
+        run("/bin/mkdir -p $prefix");
+        run("cd $blddir && make install");
+        run("test -e $prefix/share/man/man1/verilator.1");
         run("test -e $prefix/share/verilator/examples/tracing_c/Makefile");
-	run("test -e $prefix/share/verilator/include/verilated.h");
-	run("test -e $prefix/bin/verilator");
-	run("test -e $prefix/bin/verilator_bin");
-	run("test -e $prefix/bin/verilator_bin_dbg");
+        run("test -e $prefix/share/verilator/include/verilated.h");
+        run("test -e $prefix/bin/verilator");
+        run("test -e $prefix/bin/verilator_bin");
+        run("test -e $prefix/bin/verilator_bin_dbg");
         run("test -e $prefix/bin/verilator_gantt");
-	run("test -e $prefix/bin/verilator_profcfunc");
+        run("test -e $prefix/bin/verilator_profcfunc");
     }
 
     # Run a test using just the path
     if ($Opt_Stage <= 2) {
-	my $dir = $testdirp;
-	run("/bin/rm -rf   $dir");
-	run("/bin/mkdir -p $dir");
-	my $bin1 = $prefix."/bin";
-	my $bin2 = $prefix."/share/bin";
-	write_verilog($dir);
-	run("cd $dir && PATH=$bin1:$bin2:\$PATH verilator --cc foo.v --exe foo.cpp");
-	run("cd $dir/obj_dir && PATH=$bin1:$bin2:\$PATH make -f Vfoo.mk");
-	run("cd $dir && PATH=$bin1:$bin2:\$PATH obj_dir/Vfoo");
+        my $dir = $testdirp;
+        run("/bin/rm -rf   $dir");
+        run("/bin/mkdir -p $dir");
+        my $bin1 = $prefix."/bin";
+        my $bin2 = $prefix."/share/bin";
+        write_verilog($dir);
+        run("cd $dir && PATH=$bin1:$bin2:\$PATH verilator --cc foo.v --exe foo.cpp");
+        run("cd $dir/obj_dir && PATH=$bin1:$bin2:\$PATH make -f Vfoo.mk");
+        run("cd $dir && PATH=$bin1:$bin2:\$PATH obj_dir/Vfoo");
     }
 
     # Run a test using exact path to binary
     if ($Opt_Stage <= 3) {
-	my $dir = $testdirn;
-	run("/bin/rm -rf   $dir");
-	run("/bin/mkdir -p $dir");
-	write_verilog($dir);
-	my $bin1 = $prefix."/bin";
-	my $bin2 = $prefix."/share/bin";
-	run("cd $dir && $bin1/verilator --cc foo.v --exe foo.cpp");
-	run("cd $dir/obj_dir && make -f Vfoo.mk");
-	run("cd $dir/obj_dir && ./Vfoo");
+        my $dir = $testdirn;
+        run("/bin/rm -rf   $dir");
+        run("/bin/mkdir -p $dir");
+        write_verilog($dir);
+        my $bin1 = $prefix."/bin";
+        my $bin2 = $prefix."/share/bin";
+        run("cd $dir && $bin1/verilator --cc foo.v --exe foo.cpp");
+        run("cd $dir/obj_dir && make -f Vfoo.mk");
+        run("cd $dir/obj_dir && ./Vfoo");
     }
 
     if ($Opt_Stage <= 9) {
@@ -102,29 +102,29 @@ sub write_verilog {
     my $dir = shift;
     IO::File->new(">$dir/foo.v")->print('module t; initial begin $display("HELLO WORLD"); $finish; end endmodule'."\n");
     my $fh = IO::File->new(">$dir/foo.cpp");
-    $fh->print('#include "Vfoo.h"'		,"\n");
-    $fh->print('unsigned int main_time = 0;'	,"\n");
+    $fh->print('#include "Vfoo.h"'              ,"\n");
+    $fh->print('unsigned int main_time = 0;'    ,"\n");
     $fh->print('double sc_time_stamp() {'       ,"\n");
-    $fh->print('    return main_time;'		,"\n");
-    $fh->print('}'				,"\n");
-    $fh->print('int main() {'			,"\n");
-    $fh->print('    Vfoo *top = new Vfoo;'	,"\n");
+    $fh->print('    return main_time;'          ,"\n");
+    $fh->print('}'                              ,"\n");
+    $fh->print('int main() {'                   ,"\n");
+    $fh->print('    Vfoo *top = new Vfoo;'      ,"\n");
     $fh->print('    while (!Verilated::gotFinish()) {',"\n");
     $fh->print('        top->eval();'           ,"\n");
     $fh->print('        main_time++;'           ,"\n");
-    $fh->print('    }'				,"\n");
-    $fh->print('    top->final();'		,"\n");
-    $fh->print('}'				,"\n");
+    $fh->print('    }'                          ,"\n");
+    $fh->print('    top->final();'              ,"\n");
+    $fh->print('}'                              ,"\n");
 }
 
 sub cleanenv {
     foreach my $var (keys %ENV) {
-	if ($var eq "VERILATOR_ROOT"
+        if ($var eq "VERILATOR_ROOT"
             || $var eq "VERILATOR_INCLUDE"
             || $var eq "VERILATOR_NO_OPT_BUILD") {
-	    print "unset $var # Was '$ENV{$var}'\n";
-	    delete $ENV{$var}
-	}
+            print "unset $var # Was '$ENV{$var}'\n";
+            delete $ENV{$var}
+        }
     }
 }
 
@@ -132,8 +132,8 @@ sub cleanenv {
 
 sub calc_jobs {
     my $ok = eval "
-	use Unix::Processors;
-	return Unix::Processors->new->max_online;
+        use Unix::Processors;
+        return Unix::Processors->new->max_online;
     ";
     $ok && !$@ or return 1;
     print "driver.pl: Found $ok cores, using -j ",$ok+1,"\n" if $Debug;
@@ -189,7 +189,7 @@ Runs a specific test stage (see the script).
 
 =head1 DISTRIBUTION
 
-Copyright 2009-2018 by Wilson Snyder.  This package is free software; you
+Copyright 2009-2019 by Wilson Snyder.  This package is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

nodist/invoke_atsim

@@ -28,7 +28,7 @@ invoke_atsim - Invoke tool under "modules" command
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  This package is free software; you
+Copyright 2005-2019 by Wilson Snyder.  This package is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

nodist/invoke_iccr

@@ -28,7 +28,7 @@ invoke_iccr - Invoke tool under "modules" command
 
 =head1 DISTRIBUTION
 
-Copyright 2007-2018 by Wilson Snyder.  This package is free software; you
+Copyright 2007-2019 by Wilson Snyder.  This package is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

nodist/invoke_ncverilog

@@ -28,7 +28,7 @@ invoke_ncverilog - Invoke tool under "modules" command
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  This package is free software; you
+Copyright 2005-2019 by Wilson Snyder.  This package is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

nodist/invoke_vcs

@@ -28,7 +28,7 @@ invoke_vcs - Invoke tool under "modules" command
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  This package is free software; you
+Copyright 2005-2019 by Wilson Snyder.  This package is free software; you
 can redistribute it and/or modify it under the terms of either the GNU
 Lesser General Public License Version 3 or the Perl Artistic License
 Version 2.0.

nodist/vtree_importer

@@ -8,7 +8,7 @@ use IO::File;
 use Pod::Usage;
 use Data::Dumper; $Data::Dumper::Indent=1;
 use strict;
-use vars qw ($Debug);
+use vars qw($Debug);
 
 #======================================================================
 
@@ -23,15 +23,15 @@ $Debug = 0;
 my $opt_filename;
 autoflush STDOUT 1;
 autoflush STDERR 1;
-if (! GetOptions (
-		  "help"	=> \&usage,
-		  "debug"	=> \&debug,
-		  "<>"		=> \&parameter,
-		  )) {
+if (! GetOptions(
+          "help"        => \&usage,
+          "debug"       => \&debug,
+          "<>"          => \&parameter,
+    )) {
     usage();
 }
 
-vread ($opt_filename);
+vread($opt_filename);
 #print Dumper($Tree);
 vwrite();
 
@@ -41,7 +41,7 @@ print '(query-replace-regexp "(\\([0-9a-z_]+\\))" "\\1" nil nil nil)',"\n";
 
 sub usage {
     pod2usage(-verbose=>2, -exitval=>2, -output=>\*STDOUT);
-    exit (1);
+    exit(1);
 }
 
 sub debug {
@@ -51,9 +51,9 @@ sub debug {
 sub parameter {
     my $param = shift;
     if (!$opt_filename) {
-	$opt_filename = $param;
+        $opt_filename = $param;
     } else {
-	die "%Error: Unknown parameter: $param\n";
+        die "%Error: Unknown parameter: $param\n";
     }
 }
 
@@ -64,45 +64,45 @@ sub vread {
     my $fh = IO::File->new($filename) or die "%Error: $! $filename,";
     my $lasthier="";
     $Tree = {
-	op => 'NETLIST',
-	t => [[],[],[],[],[],],
+        op => 'NETLIST',
+        t => [[],[],[],[],[],],
     };
     my @stack;
     $stack[1] = $Tree;
     while (defined (my $line = $fh->getline)) {
-	if ($line =~ /^\s+(\S+):\s+(\S+)\s+0x\S+\s+{(\d+)}\s+w(\d+)\s+(.*)$/) {
-	    my $hier = $1;
-	    my $op = $2;
-	    my $lineno = $3;
-	    my $width = $4;
-	    my $etc = $5;
+        if ($line =~ /^\s+(\S+):\s+(\S+)\s+0x\S+\s+{(\d+)}\s+w(\d+)\s+(.*)$/) {
+            my $hier = $1;
+            my $op = $2;
+            my $lineno = $3;
+            my $width = $4;
+            my $etc = $5;
 
-	    $etc =~ s/__DOT__/./g;
-	    $etc =~ s/__PVT__//g;
+            $etc =~ s/__DOT__/./g;
+            $etc =~ s/__PVT__//g;
 
-	    my $self = {
-		op => $op,
-		#width =>  $width,
-		#lineno => $lineno,
-		#line => $line,
-		etc => $etc,
-		args => [split(/[ \t]+/,$etc)],
-		t => [[],[],[],[],[],],
-	    };
+            my $self = {
+                op => $op,
+                #width =>  $width,
+                #lineno => $lineno,
+                #line => $line,
+                etc => $etc,
+                args => [split(/[ \t]+/,$etc)],
+                t => [[],[],[],[],[],],
+            };
 
-	    my @hiers = (1,split(/:/,$hier));
-	    my $depth = $#hiers+1;
-	    my $newchild = $hiers[$#hiers];
+            my @hiers = (1,split(/:/,$hier));
+            my $depth = $#hiers+1;
+            my $newchild = $hiers[$#hiers];
 
-	    #print "DD $depth $newchild $op\n";
+            #print "DD $depth $newchild $op\n";
 
-	    push @{$stack[$depth-1]->{t}[$newchild]}, $self;
-	    $stack[$depth] = $self;
+            push @{$stack[$depth-1]->{t}[$newchild]}, $self;
+            $stack[$depth] = $self;
 
-	    $lasthier = $hier;
-	    #print "   $lasthier\n";
-	    #print Dumper($Tree);
-	}
+            $lasthier = $hier;
+            #print "   $lasthier\n";
+            #print Dumper($Tree);
+        }
     }
 }
 
@@ -168,125 +168,125 @@ sub nl { p "\n"," "x$Indent; }
 
 sub gentree {
 %OpMap = (
-  'NULLNODE'	=> sub { "" },
-  'NETLIST'	=> sub { nl;t1;t2;t3;t4;t5; },
-  'ACTIVE'	=> sub { p "always_act @(";t1;p ") begin";indentInc;nl;t2;t3;t4;t5;indentDec;p "end";nl; },
-  'ADD'		=> sub { p1;p " + ";p2; },
-  'ALWAYS'	=> sub { p "always @(";t1;p ") begin";indentInc;nl;t2;t3;t4;t5;indentDec;p "end";nl; },
-  'ALWAYSPOST'	=> sub { p "ALWAYSPOST what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'AND'		=> sub { p1;p " & ";p2; },
-  'ARRAYSEL'	=> sub { t1;p "[";t2;p "]"; },
-  'ASSIGN'	=> sub { t2;p " = ";t1;p ";";nl; },
-  'ASSIGNDLY'	=> sub { t2;p " <= ";t1;p ";";nl; },
-  'ASSIGNPOST'	=> sub { p "ASSIGNPOST what{";t1;p " = ";t2;p ";";nl; },
-  'ASSIGNPRE'	=> sub { p "ASSIGNPRE what{";t1;p " = ";t2;p ";";nl; },
-  'ASSIGNW'	=> sub { p "assign ";t2;p " = ";t1;p ";";nl; },
-  'ATTROF'	=> sub { p "ATTROF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'BEGIN'	=> sub { p "begin";indentInc;nl;t1;t2;t3;t4;t5;indentDec;p "end";nl; },
-  'BITSEL'	=> sub { t1;local $Avoid_Hex=1; p "[";t2;p "]"; },
-  'CASE'	=> sub { p "CASE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CASEITEM'	=> sub { p "CASEITEM what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CAST'	=> sub { p "CAST what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CCALL'	=> sub { p "CCALL what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CELL'	=> sub { a1;p " ";a7;p " (/*CELL*/);"; nl; },
-  'CFUNC'	=> sub { p "CFUNC what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CHANGEDET'	=> sub { p "CHANGEDET what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CINCLUDE'	=> sub { p "CINCLUDE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'COMMENT'	=> sub { p "//COMMENT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl;nl; },
-  'CONCAT'	=> sub { p "{";p1;p ",";p2;p "}"; },
-  'CONDITIONAL'	=> sub { p1;p " ? ";p2;p " : ";p3; },
-  'CONST'	=> sub { p_const(); },
-  'COVER'	=> sub { p "COVER what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CRETURN'	=> sub { p "CRETURN what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'CSTMT'	=> sub { p "CSTMT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'DEFPARAM'	=> sub { p "defparam ";p1;p " = ";p2;p ";";nl; },
-  'DISPLAY'	=> sub { p '$write("';p1;p "\",";p2;p3;p4;p5;p ");";nl; },
-  'DIV'		=> sub { p1;p " / ";p2; },
-  'EQ'		=> sub { p1;p " == ";p2; },
-  'EQCASE'	=> sub { p1;p " === ";p2; },
-  'EXTEND'	=> sub { t1; },
-  'EXTRACT'	=> sub { t1;local $Avoid_Hex=1; p "[";t2;p ":";t3;p "]"; },
-  'FINISH'	=> sub { p '$finish;';nl },
-  'FOR'		=> sub { p "for (";p1;p ",";p2;p ",";p3;p ") begin";indentInc;nl;p4;p5;indentDec;p "end";nl; },
-  'FUNC'	=> sub { p "FUNC what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'FUNCREF'	=> sub { p "FUNCREF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'GT'		=> sub { p1;p " > ";p2; },
-  'GTE'		=> sub { p1;p " >= ";p2; },
-  'IF'		=> sub { p "if (";p1;p ") begin";indentInc;nl;t2;indentDec;if (exists3) {p "end else begin";indentInc;nl;t3;indentDec;} p "end"; nl; },
-  'INITARRAY'	=> sub { p "INITARRAY what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'INITIAL'	=> sub { p "initial begin";indentInc;nl;t1;t2;t3;t4;t5;indentDec;p "end";nl; },
-  'LOGAND'	=> sub { p1;p " && ";p2; },
-  'LOGNOT'	=> sub { p1;p " || ";p2; },
-  'LOGOR'	=> sub { p "!";p1; },
-  'LT'		=> sub { p1;p " < ";p2; },
-  'LTE'		=> sub { p1;p " <= ";p2; },
-  'MODDIV'	=> sub { p1;p " % ";p2; },
-  'MODULE'	=> sub { p "module ";a1;p " (/*AUTOARG*/);";indentInc;nl;t1;t2;t3;t4;t5;indentDec;nl;p "endmodule";nl; },
-  'MUL'		=> sub { p1;p " * ";p2; },
-  'NEQ'		=> sub { p1;p " != ";p2; },
-  'NEQCASE'	=> sub { p1;p " !== ";p2; },
-  'NOT'		=> sub { p " ~";p1; },
-  'OR'		=> sub { p1;p " | ";p2; },
-  'PIN'		=> sub { p ";p ";p1;p " (";p2;p "),";nl; },
-  'PORT'	=> sub { p ""; },
-  'PRAGMA'	=> sub { p "PRAGMA what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'RAND'	=> sub { p '$rand'; },
-  'RANGE'	=> sub { t1; local $Avoid_Hex=1; p "[";t2;p ":";t3;p "]"; },
-  'REDAND'	=> sub { p "&(";p1;p ")"; },
-  'REDOR'	=> sub { p "|(";p1;p ")"; },
-  'REDXNOR'	=> sub { p "~|(";p1;p ")"; },
-  'REDXOR'	=> sub { p "~^(";p1;p ")"; },
-  'REPLICATE'	=> sub { p "{";p1;p "{";p2;p "}}"; },
-  'SCCTOR'	=> sub { p "SCCTOR what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'SCHDR'	=> sub { p "SCHDR what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'SCIMP'	=> sub { p "SCIMP what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'SCINT'	=> sub { p "SCINT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'SCOPE'	=> sub { t1;t2;t3;t4;t5; },
-  'SENITEM'	=> sub { a1;p " ";t1; },
-  'SENTREE'	=> sub { t1;t2;t3;t4;t5; },
-  'SHIFTL'	=> sub { p1;p " << ";p2; },
-  'SHIFTR'	=> sub { p1;p " >> ";p2; },
-  'STOP'	=> sub { p '$stop;';nl; },
-  'SUB'		=> sub { p1;p " - ";p2; },
-  'TASK'	=> sub { p "TASK what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'TASKREF'	=> sub { p "TASKREF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'TEXT'	=> sub { p "TEXT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'TIME'	=> sub { p '$time'; },
-  'TOPSCOPE'	=> sub { t1;t2;t3;t4;t5; },
-  'TRACE'	=> sub { p "TRACE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'UCFUNC'	=> sub { p '$c(';p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p ")"; },
-  'UCSTMT'	=> sub { p '$c(';p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p ");";nl; },
-  'NEGATE'	=> sub { p " -";p1; },
-  'VAR'		=> sub { p_var(); },
-  'VARPIN'	=> sub { p "VARPIN what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
-  'VARREF'	=> sub { a1; },
-  'VARSCOPE'	=> sub { },
-  'WHILE'	=> sub { t1; p "while (";t2;p ") begin";indentInc;nl;t3;t4;indentDec;p "end";nl; },
-  'WORDSEL'	=> sub { p1;p "[";p2;p ":";p3;p "]"; },
-  'XNOR'	=> sub { p1;p " ~^ ";p2; },
-  'XOR'		=> sub { p1;p " ^";p2; },
+  'NULLNODE'    => sub { "" },
+  'NETLIST'     => sub { nl;t1;t2;t3;t4;t5; },
+  'ACTIVE'      => sub { p "always_act @(";t1;p ") begin";indentInc;nl;t2;t3;t4;t5;indentDec;p "end";nl; },
+  'ADD'         => sub { p1;p " + ";p2; },
+  'ALWAYS'      => sub { p "always @(";t1;p ") begin";indentInc;nl;t2;t3;t4;t5;indentDec;p "end";nl; },
+  'ALWAYSPOST'  => sub { p "ALWAYSPOST what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'AND'         => sub { p1;p " & ";p2; },
+  'ARRAYSEL'    => sub { t1;p "[";t2;p "]"; },
+  'ASSIGN'      => sub { t2;p " = ";t1;p ";";nl; },
+  'ASSIGNDLY'   => sub { t2;p " <= ";t1;p ";";nl; },
+  'ASSIGNPOST'  => sub { p "ASSIGNPOST what{";t1;p " = ";t2;p ";";nl; },
+  'ASSIGNPRE'   => sub { p "ASSIGNPRE what{";t1;p " = ";t2;p ";";nl; },
+  'ASSIGNW'     => sub { p "assign ";t2;p " = ";t1;p ";";nl; },
+  'ATTROF'      => sub { p "ATTROF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'BEGIN'       => sub { p "begin";indentInc;nl;t1;t2;t3;t4;t5;indentDec;p "end";nl; },
+  'BITSEL'      => sub { t1;local $Avoid_Hex=1; p "[";t2;p "]"; },
+  'CASE'        => sub { p "CASE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CASEITEM'    => sub { p "CASEITEM what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CAST'        => sub { p "CAST what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CCALL'       => sub { p "CCALL what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CELL'        => sub { a1;p " ";a7;p " (/*CELL*/);"; nl; },
+  'CFUNC'       => sub { p "CFUNC what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CHANGEDET'   => sub { p "CHANGEDET what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CINCLUDE'    => sub { p "CINCLUDE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'COMMENT'     => sub { p "//COMMENT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl;nl; },
+  'CONCAT'      => sub { p "{";p1;p ",";p2;p "}"; },
+  'CONDITIONAL' => sub { p1;p " ? ";p2;p " : ";p3; },
+  'CONST'       => sub { p_const(); },
+  'COVER'       => sub { p "COVER what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CRETURN'     => sub { p "CRETURN what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'CSTMT'       => sub { p "CSTMT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'DEFPARAM'    => sub { p "defparam ";p1;p " = ";p2;p ";";nl; },
+  'DISPLAY'     => sub { p '$write("';p1;p "\",";p2;p3;p4;p5;p ");";nl; },
+  'DIV'         => sub { p1;p " / ";p2; },
+  'EQ'          => sub { p1;p " == ";p2; },
+  'EQCASE'      => sub { p1;p " === ";p2; },
+  'EXTEND'      => sub { t1; },
+  'EXTRACT'     => sub { t1;local $Avoid_Hex=1; p "[";t2;p ":";t3;p "]"; },
+  'FINISH'      => sub { p '$finish;';nl },
+  'FOR'         => sub { p "for (";p1;p ",";p2;p ",";p3;p ") begin";indentInc;nl;p4;p5;indentDec;p "end";nl; },
+  'FUNC'        => sub { p "FUNC what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'FUNCREF'     => sub { p "FUNCREF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'GT'          => sub { p1;p " > ";p2; },
+  'GTE'         => sub { p1;p " >= ";p2; },
+  'IF'          => sub { p "if (";p1;p ") begin";indentInc;nl;t2;indentDec;if (exists3) {p "end else begin";indentInc;nl;t3;indentDec;} p "end"; nl; },
+  'INITARRAY'   => sub { p "INITARRAY what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'INITIAL'     => sub { p "initial begin";indentInc;nl;t1;t2;t3;t4;t5;indentDec;p "end";nl; },
+  'LOGAND'      => sub { p1;p " && ";p2; },
+  'LOGNOT'      => sub { p1;p " || ";p2; },
+  'LOGOR'       => sub { p "!";p1; },
+  'LT'          => sub { p1;p " < ";p2; },
+  'LTE'         => sub { p1;p " <= ";p2; },
+  'MODDIV'      => sub { p1;p " % ";p2; },
+  'MODULE'      => sub { p "module ";a1;p " (/*AUTOARG*/);";indentInc;nl;t1;t2;t3;t4;t5;indentDec;nl;p "endmodule";nl; },
+  'MUL'         => sub { p1;p " * ";p2; },
+  'NEQ'         => sub { p1;p " != ";p2; },
+  'NEQCASE'     => sub { p1;p " !== ";p2; },
+  'NOT'         => sub { p " ~";p1; },
+  'OR'          => sub { p1;p " | ";p2; },
+  'PIN'         => sub { p ";p ";p1;p " (";p2;p "),";nl; },
+  'PORT'        => sub { p ""; },
+  'PRAGMA'      => sub { p "PRAGMA what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'RAND'        => sub { p '$rand'; },
+  'RANGE'       => sub { t1; local $Avoid_Hex=1; p "[";t2;p ":";t3;p "]"; },
+  'REDAND'      => sub { p "&(";p1;p ")"; },
+  'REDOR'       => sub { p "|(";p1;p ")"; },
+  'REDXNOR'     => sub { p "~|(";p1;p ")"; },
+  'REDXOR'      => sub { p "~^(";p1;p ")"; },
+  'REPLICATE'   => sub { p "{";p1;p "{";p2;p "}}"; },
+  'SCCTOR'      => sub { p "SCCTOR what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'SCHDR'       => sub { p "SCHDR what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'SCIMP'       => sub { p "SCIMP what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'SCINT'       => sub { p "SCINT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'SCOPE'       => sub { t1;t2;t3;t4;t5; },
+  'SENITEM'     => sub { a1;p " ";t1; },
+  'SENTREE'     => sub { t1;t2;t3;t4;t5; },
+  'SHIFTL'      => sub { p1;p " << ";p2; },
+  'SHIFTR'      => sub { p1;p " >> ";p2; },
+  'STOP'        => sub { p '$stop;';nl; },
+  'SUB'         => sub { p1;p " - ";p2; },
+  'TASK'        => sub { p "TASK what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'TASKREF'     => sub { p "TASKREF what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'TEXT'        => sub { p "TEXT what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'TIME'        => sub { p '$time'; },
+  'TOPSCOPE'    => sub { t1;t2;t3;t4;t5; },
+  'TRACE'       => sub { p "TRACE what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'UCFUNC'      => sub { p '$c(';p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p ")"; },
+  'UCSTMT'      => sub { p '$c(';p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p ");";nl; },
+  'NEGATE'      => sub { p " -";p1; },
+  'VAR'         => sub { p_var(); },
+  'VARPIN'      => sub { p "VARPIN what{";p1;p ",";p2;p ",";p3;p ",";p4;p ",";p5;p "}";nl; },
+  'VARREF'      => sub { a1; },
+  'VARSCOPE'    => sub { },
+  'WHILE'       => sub { t1; p "while (";t2;p ") begin";indentInc;nl;t3;t4;indentDec;p "end";nl; },
+  'WORDSEL'     => sub { p1;p "[";p2;p ":";p3;p "]"; },
+  'XNOR'        => sub { p1;p " ~^ ";p2; },
+  'XOR'         => sub { p1;p " ^";p2; },
 );
 }
 
 sub p_var {
     my $self = $Code_Self;
     if ($self->{etc} =~ /\[I\]/) {
-	print "input";
+        print "input";
     } elsif ($self->{etc} =~ /\[O\]/) {
-	print "output";
+        print "output";
     } else {
-	print "reg";
+        print "reg";
     }
     p "\t";
     {
-	local $Avoid_Hex=1;
-	t1;
+        local $Avoid_Hex=1;
+        t1;
     }
     p "\t";
     a1;
     if (exists2()) {
-	p " = ";
-	t2;
+        p " = ";
+        t2;
     }
     p ";";
     nl;
@@ -295,10 +295,10 @@ sub p_var {
 sub p_const {
     my $v = $Code_Self->{args}[0];
     if ($v =~ /\?32\?h(.*)$/
-	|| ($Avoid_Hex && $v =~ /^[0-9?]*h(.*)$/)) {
-	print hex $1;
+        || ($Avoid_Hex && $v =~ /^[0-9?]*h(.*)$/)) {
+        print hex $1;
     } else {
-	print $v;
+        print $v;
     }
 }
 
@@ -331,7 +331,7 @@ Displays this message and program version and exits.
 
 =head1 DISTRIBUTION
 
-Copyright 2005-2018 by Wilson Snyder.  Verilator is free software; you can
+Copyright 2005-2019 by Wilson Snyder.  Verilator is free software; you can
 redistribute it and/or modify it under the terms of either the GNU Lesser
 General Public License Version 3 or the Perl Artistic License Version 2.0.
 

src/.gdbinit

@@ -1,6 +1,6 @@
 # DESCRIPTION: Verilator: GDB startup file with useful defines
 #
-# Copyright 2012-2018 by Wilson Snyder. This program is free software; you can
+# Copyright 2012-2019 by Wilson Snyder. This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.

src/Makefile.in

@@ -7,7 +7,7 @@
 #
 #*****************************************************************************
 #
-# Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.

src/Makefile_obj.in

@@ -7,7 +7,7 @@
 #
 #*****************************************************************************
 #
-# Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+# Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 # redistribute it and/or modify it under the terms of either the GNU
 # Lesser General Public License Version 3 or the Perl Artistic License
 # Version 2.0.
@@ -60,6 +60,8 @@ pkgdatadir = @pkgdatadir@
 CFG_WITH_CCWARN = @CFG_WITH_CCWARN@
 CFG_WITH_DEFENV = @CFG_WITH_DEFENV@
 CPPFLAGS += @CPPFLAGS@
+CFLAGS += @CFLAGS@
+CXXFLAGS += @CXXFLAGS@
 LDFLAGS += @LDFLAGS@
 EXEEXT = @EXEEXT@
 CFG_CXXFLAGS_SRC = @CFG_CXXFLAGS_SRC@
@@ -135,7 +137,7 @@ VLCOVGEN = $(srcdir)/vlcovgen
 all: make_info $(TGT)
 
 make_info:
-	@echo "      Compile flags: " $(CXX) ${CPPFLAGS}
+	@echo "      Compile flags: " $(CXX) ${CFLAGS} ${CXXFLAGS} ${CPPFLAGS}
 
 clean mostlyclean distclean maintainer-clean::
 	-rm -f *.o *.d perlxsi.c *_gen_*
@@ -167,7 +169,6 @@ RAW_OBJS = \
 	V3Cdc.o \
 	V3Changed.o \
 	V3Clean.o \
-	V3ClkGater.o \
 	V3Clock.o \
 	V3Combine.o \
 	V3Config.o \
@@ -280,21 +281,21 @@ V3Number_test: V3Number_test.o
 	$(PERL) $(ASTGEN) -I$(srcdir) $*.cpp
 
 %.o:	%.cpp
-	$(OBJCACHE) ${CXX} ${CPPFLAGSWALL} -c $<
+	$(OBJCACHE) ${CXX} ${CXXFLAGS} ${CPPFLAGSWALL} -c $<
 %.o:	%.c
-	$(OBJCACHE) ${CC}  ${CPPFLAGSWALL} -c $<
+	$(OBJCACHE) ${CC}  ${CFLAGS} ${CPPFLAGSWALL} -c $<
 
 V3ParseLex.o:	V3ParseLex.cpp V3Lexer.yy.cpp V3ParseBison.c
-	$(OBJCACHE) ${CXX} ${CPPFLAGSPARSER} -c $<
+	$(OBJCACHE) ${CXX} ${CXXFLAGS} ${CPPFLAGSPARSER} -c $<
 
 V3ParseGrammar.o:	V3ParseGrammar.cpp V3ParseBison.c
-	$(OBJCACHE) ${CXX} ${CPPFLAGSPARSER} -c $<
+	$(OBJCACHE) ${CXX} ${CXXFLAGS} ${CPPFLAGSPARSER} -c $<
 
 V3ParseImp.o:	V3ParseImp.cpp V3ParseBison.c
-	$(OBJCACHE) ${CXX} ${CPPFLAGSPARSER} -c $<
+	$(OBJCACHE) ${CXX} ${CXXFLAGS} ${CPPFLAGSPARSER} -c $<
 
 V3PreProc.o:	V3PreProc.cpp V3PreLex.yy.cpp
-	$(OBJCACHE) ${CXX} ${CPPFLAGSPARSER} -c $<
+	$(OBJCACHE) ${CXX} ${CXXFLAGS} ${CPPFLAGSPARSER} -c $<
 
 #### Generated files
 

src/V3Active.cpp

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -21,12 +21,12 @@
 //
 // Note this can be called multiple times.
 //   Create a IACTIVE(initial), SACTIVE(combo)
-//	ALWAYS: Remove any-edges from sense list
-//	    If no POS/NEG in senselist, Fold into SACTIVE(combo)
-//	    Else fold into SACTIVE(sequent).
-//	    OPTIMIZE: When support async clocks, fold into that active if possible
-//	INITIAL: Move into IACTIVE
-//	WIRE: Move into SACTIVE(combo)
+//      ALWAYS: Remove any-edges from sense list
+//          If no POS/NEG in senselist, Fold into SACTIVE(combo)
+//          Else fold into SACTIVE(sequent).
+//          OPTIMIZE: When support async clocks, fold into that active if possible
+//      INITIAL: Move into IACTIVE
+//      WIRE: Move into SACTIVE(combo)
 //
 //*************************************************************************
 
@@ -56,66 +56,68 @@ class ActiveNamer : public ActiveBaseVisitor {
 private:
     typedef std::map<string,AstActive*> ActiveNameMap;
     // STATE
-    AstScope*	m_scopep;		// Current scope to add statement to
-    AstActive*	m_iActivep;		// For current scope, the IActive we're building
-    AstActive*	m_cActivep;		// For current scope, the SActive(combo) we're building
+    AstScope*   m_scopep;               // Current scope to add statement to
+    AstActive*  m_iActivep;             // For current scope, the IActive we're building
+    AstActive*  m_cActivep;             // For current scope, the SActive(combo) we're building
 
-    SenTreeSet  m_activeSens;  // Sen lists for each active we've made
+    SenTreeSet m_activeSens;  // Sen lists for each active we've made
     typedef vl_unordered_map<AstSenTree*, AstActive*> ActiveMap;
     ActiveMap m_activeMap;  // Map sentree to active, for folding.
 
     // METHODS
     void addActive(AstActive* nodep) {
-	if (!m_scopep) nodep->v3fatalSrc("NULL scope");
-	m_scopep->addActivep(nodep);
+        UASSERT_OBJ(m_scopep, nodep, "NULL scope");
+        m_scopep->addActivep(nodep);
     }
     // VISITORS
     virtual void visit(AstScope* nodep) {
-	m_scopep = nodep;
-	m_iActivep = NULL;
-	m_cActivep = NULL;
+        m_scopep = nodep;
+        m_iActivep = NULL;
+        m_cActivep = NULL;
         m_activeSens.clear();
         m_activeMap.clear();
         iterateChildren(nodep);
-	// Don't clear scopep, the namer persists beyond this visit
+        // Don't clear scopep, the namer persists beyond this visit
     }
     virtual void visit(AstSenTree* nodep) {
-	// Simplify sensitivity list
-	V3Const::constifyExpensiveEdit(nodep); VL_DANGLING(nodep);
+        // Simplify sensitivity list
+        V3Const::constifyExpensiveEdit(nodep); VL_DANGLING(nodep);
     }
     // Empty visitors, speed things up
     virtual void visit(AstNodeStmt* nodep) { }
     //--------------------
     // Default
     virtual void visit(AstNode* nodep) {
-	// Default: Just iterate
+        // Default: Just iterate
         iterateChildren(nodep);
     }
     // METHODS
 public:
     AstScope* scopep() { return m_scopep; }
     AstActive* getCActive(FileLine* fl) {
-	if (!m_cActivep) {
-	    m_cActivep = new AstActive(fl, "combo",
-				       new AstSenTree(fl, new AstSenItem(fl,AstSenItem::Combo())));
-	    m_cActivep->sensesStorep(m_cActivep->sensesp());
-	    addActive(m_cActivep);
-	}
-	return m_cActivep;
+        if (!m_cActivep) {
+            m_cActivep = new AstActive(
+                fl, "combo",
+                new AstSenTree(fl, new AstSenItem(fl, AstSenItem::Combo())));
+            m_cActivep->sensesStorep(m_cActivep->sensesp());
+            addActive(m_cActivep);
+        }
+        return m_cActivep;
     }
     AstActive* getIActive(FileLine* fl) {
-	if (!m_iActivep) {
-	    m_iActivep = new AstActive(fl, "initial",
-				       new AstSenTree(fl, new AstSenItem(fl,AstSenItem::Initial())));
-	    m_iActivep->sensesStorep(m_iActivep->sensesp());
-	    addActive(m_iActivep);
-	}
-	return m_iActivep;
+        if (!m_iActivep) {
+            m_iActivep = new AstActive(
+                fl, "initial",
+                new AstSenTree(fl, new AstSenItem(fl, AstSenItem::Initial())));
+            m_iActivep->sensesStorep(m_iActivep->sensesp());
+            addActive(m_iActivep);
+        }
+        return m_iActivep;
     }
     AstActive* getActive(FileLine* fl, AstSenTree* sensesp) {
-	// Return a sentree in this scope that matches given sense list.
+        // Return a sentree in this scope that matches given sense list.
 
-	AstActive* activep = NULL;
+        AstActive* activep = NULL;
         AstSenTree* activeSenp = m_activeSens.find(sensesp);
         if (activeSenp) {
             ActiveMap::iterator it = m_activeMap.find(activeSenp);
@@ -123,26 +125,26 @@ public:
             activep = it->second;
         }
 
-	// Not found, form a new one
-	if (!activep) {
-	    AstSenTree* newsenp = sensesp->cloneTree(false);
-	    activep = new AstActive(fl, "sequent", newsenp);
-	    activep->sensesStorep(activep->sensesp());
-	    UINFO(8,"    New ACTIVE "<<activep<<endl);
-	    // Form the sensitivity list
-	    addActive(activep);
+        // Not found, form a new one
+        if (!activep) {
+            AstSenTree* newsenp = sensesp->cloneTree(false);
+            activep = new AstActive(fl, "sequent", newsenp);
+            activep->sensesStorep(activep->sensesp());
+            UINFO(8,"    New ACTIVE "<<activep<<endl);
+            // Form the sensitivity list
+            addActive(activep);
             m_activeMap[newsenp] = activep;
             m_activeSens.add(newsenp);
-	    // Note actives may have also been added above in the Active visitor
-	}
-	return activep;
+            // Note actives may have also been added above in the Active visitor
+        }
+        return activep;
     }
 public:
     // CONSTUCTORS
     ActiveNamer() {
-	m_scopep = NULL;
-	m_iActivep = NULL;
-	m_cActivep = NULL;
+        m_scopep = NULL;
+        m_iActivep = NULL;
+        m_cActivep = NULL;
     }
     virtual ~ActiveNamer() {}
     void main(AstScope* nodep) {
@@ -157,55 +159,55 @@ class ActiveDlyVisitor : public ActiveBaseVisitor {
 public:
     enum CheckType { CT_SEQ, CT_COMBO, CT_INITIAL, CT_LATCH };
 private:
-    CheckType 	m_check;	// Combo logic or other
-    AstNode*	m_alwaysp;	// Always we're under
-    AstNode*	m_assignp;	// In assign
+    CheckType   m_check;        // Combo logic or other
+    AstNode*    m_alwaysp;      // Always we're under
+    AstNode*    m_assignp;      // In assign
     // VISITORS
     virtual void visit(AstAssignDly* nodep) {
-	if (m_check != CT_SEQ) {
-	    // Convert to a non-delayed assignment
-	    UINFO(5,"    ASSIGNDLY "<<nodep<<endl);
-	    if (m_check == CT_INITIAL) {
-                nodep->v3warn(INITIALDLY, "Delayed assignments (<=) in initial"
-                              " or final block; suggest blocking assignments (=).");
-	    } else if (m_check == CT_LATCH) {
-		// Suppress. Shouldn't matter that the interior of the latch races
-	    } else {
+        if (m_check != CT_SEQ) {
+            // Convert to a non-delayed assignment
+            UINFO(5,"    ASSIGNDLY "<<nodep<<endl);
+            if (m_check == CT_INITIAL) {
+                nodep->v3warn(INITIALDLY, "Delayed assignments (<=) in initial or final block\n"
+                              <<nodep->warnMore()<<"... Suggest blocking assignments (=)");
+            } else if (m_check == CT_LATCH) {
+                // Suppress. Shouldn't matter that the interior of the latch races
+            } else {
                 nodep->v3warn(COMBDLY, "Delayed assignments (<=) in non-clocked"
-                              " (non flop or latch) block; suggest blocking assignments (=).");
-	    }
+                              " (non flop or latch) block\n"
+                              <<nodep->warnMore()<<"... Suggest blocking assignments (=)");
+            }
             AstNode* newp = new AstAssign(nodep->fileline(),
                                           nodep->lhsp()->unlinkFrBack(),
                                           nodep->rhsp()->unlinkFrBack());
-	    nodep->replaceWith(newp);
-	    nodep->deleteTree(); VL_DANGLING(nodep);
-	}
+            nodep->replaceWith(newp);
+            nodep->deleteTree(); VL_DANGLING(nodep);
+        }
     }
     virtual void visit(AstAssign* nodep) {
-	if (m_check == CT_SEQ) {
-	    AstNode* las = m_assignp;
-	    m_assignp = nodep;
+        if (m_check == CT_SEQ) {
+            AstNode* las = m_assignp;
+            m_assignp = nodep;
             iterateAndNextNull(nodep->lhsp());
-	    m_assignp = las;
-	}
+            m_assignp = las;
+        }
     }
     virtual void visit(AstVarRef* nodep) {
-	AstVar* varp=nodep->varp();
-	if (m_check == CT_SEQ
-	    && m_assignp
-	    && !varp->isUsedLoopIdx() // Ignore loop indicies
-	    && !varp->isTemp()
-	    ) {
-	    // Allow turning off warnings on the always, or the variable also
-	    if (!m_alwaysp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)
-		&& !m_assignp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)
-		&& !varp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)
-		) {
-		m_alwaysp->fileline()->modifyWarnOff(V3ErrorCode::BLKSEQ, true);  // Complain just once for the entire always
-		varp->fileline()->modifyWarnOff(V3ErrorCode::BLKSEQ, true);
-		nodep->v3warn(BLKSEQ,"Blocking assignments (=) in sequential (flop or latch) block; suggest delayed assignments (<=).");
-	    }
-	}
+        AstVar* varp = nodep->varp();
+        if (m_check == CT_SEQ
+            && m_assignp
+            && !varp->isUsedLoopIdx()  // Ignore loop indicies
+            && !varp->isTemp()) {
+            // Allow turning off warnings on the always, or the variable also
+            if (!m_alwaysp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)
+                && !m_assignp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)
+                && !varp->fileline()->warnIsOff(V3ErrorCode::BLKSEQ)) {
+                m_assignp->v3warn(BLKSEQ, "Blocking assignments (=) in sequential (flop or latch) block\n"
+                                  <<m_assignp->warnMore()<<"... Suggest delayed assignments (<=)");
+                m_alwaysp->fileline()->modifyWarnOff(V3ErrorCode::BLKSEQ, true);  // Complain just once for the entire always
+                varp->fileline()->modifyWarnOff(V3ErrorCode::BLKSEQ, true);
+            }
+        }
     }
     //--------------------
     virtual void visit(AstNode* nodep) {
@@ -214,9 +216,9 @@ private:
 public:
     // CONSTUCTORS
     ActiveDlyVisitor(AstNode* nodep, CheckType check) {
-	m_alwaysp = nodep;
-	m_check = check;
-	m_assignp = NULL;
+        m_alwaysp = nodep;
+        m_check = check;
+        m_assignp = NULL;
         iterate(nodep);
     }
     virtual ~ActiveDlyVisitor() {}
@@ -229,183 +231,188 @@ class ActiveVisitor : public ActiveBaseVisitor {
 private:
     // NODE STATE
     //  Each call to V3Const::constify
-    //   AstNode::user4()		Used by V3Const::constify, called below
+    //   AstNode::user4()               Used by V3Const::constify, called below
 
     // STATE
-    ActiveNamer	m_namer;	// Tracking of active names
-    AstCFunc*   m_scopeFinalp;	// Final function for this scope
-    bool	m_itemCombo;	// Found a SenItem combo
-    bool	m_itemSequent;	// Found a SenItem sequential
+    ActiveNamer m_namer;        // Tracking of active names
+    AstCFunc*   m_scopeFinalp;  // Final function for this scope
+    bool        m_itemCombo;    // Found a SenItem combo
+    bool        m_itemSequent;  // Found a SenItem sequential
 
     // VISITORS
     virtual void visit(AstScope* nodep) {
-	// Create required actives and add to scope
-	UINFO(4," SCOPE   "<<nodep<<endl);
-	// Clear last scope's names, and collect this scope's existing names
-	m_namer.main(nodep);
-	m_scopeFinalp = NULL;
+        // Create required actives and add to scope
+        UINFO(4," SCOPE   "<<nodep<<endl);
+        // Clear last scope's names, and collect this scope's existing names
+        m_namer.main(nodep);
+        m_scopeFinalp = NULL;
         iterateChildren(nodep);
     }
     virtual void visit(AstActive* nodep) {
-	// Actives are being formed, so we can ignore any already made
+        // Actives are being formed, so we can ignore any already made
     }
     virtual void visit(AstInitial* nodep) {
-	// Relink to IACTIVE, unless already under it
-	UINFO(4,"    INITIAL "<<nodep<<endl);
-	ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_INITIAL);
-	AstActive* wantactivep = m_namer.getIActive(nodep->fileline());
-	nodep->unlinkFrBack();
-	wantactivep->addStmtsp(nodep);
+        // Relink to IACTIVE, unless already under it
+        UINFO(4,"    INITIAL "<<nodep<<endl);
+        ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_INITIAL);
+        AstActive* wantactivep = m_namer.getIActive(nodep->fileline());
+        nodep->unlinkFrBack();
+        wantactivep->addStmtsp(nodep);
     }
     virtual void visit(AstAssignAlias* nodep) {
-	// Relink to CACTIVE, unless already under it
-	UINFO(4,"    ASSIGNW "<<nodep<<endl);
-	AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
-	nodep->unlinkFrBack();
-	wantactivep->addStmtsp(nodep);
+        // Relink to CACTIVE, unless already under it
+        UINFO(4,"    ASSIGNW "<<nodep<<endl);
+        AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
+        nodep->unlinkFrBack();
+        wantactivep->addStmtsp(nodep);
     }
     virtual void visit(AstAssignW* nodep) {
-	// Relink to CACTIVE, unless already under it
-	UINFO(4,"    ASSIGNW "<<nodep<<endl);
-	AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
-	nodep->unlinkFrBack();
-	wantactivep->addStmtsp(nodep);
+        // Relink to CACTIVE, unless already under it
+        UINFO(4,"    ASSIGNW "<<nodep<<endl);
+        AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
+        nodep->unlinkFrBack();
+        wantactivep->addStmtsp(nodep);
     }
     virtual void visit(AstCoverToggle* nodep) {
-	// Relink to CACTIVE, unless already under it
-	UINFO(4,"    COVERTOGGLE "<<nodep<<endl);
-	AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
-	nodep->unlinkFrBack();
-	wantactivep->addStmtsp(nodep);
+        // Relink to CACTIVE, unless already under it
+        UINFO(4,"    COVERTOGGLE "<<nodep<<endl);
+        AstActive* wantactivep = m_namer.getCActive(nodep->fileline());
+        nodep->unlinkFrBack();
+        wantactivep->addStmtsp(nodep);
     }
     virtual void visit(AstFinal* nodep) {
-	// Relink to CFUNC for the final
-	UINFO(4,"    FINAL "<<nodep<<endl);
-	if (!nodep->bodysp()) { // Empty, Kill it.
-	    nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
-	    return;
-	}
-	ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_INITIAL);
-	if (!m_scopeFinalp) {
-	    m_scopeFinalp = new AstCFunc(nodep->fileline(), "_final_"+m_namer.scopep()->nameDotless(), m_namer.scopep());
-	    m_scopeFinalp->argTypes(EmitCBaseVisitor::symClassVar());
-	    m_scopeFinalp->addInitsp(new AstCStmt(nodep->fileline(), EmitCBaseVisitor::symTopAssign()+"\n"));
-	    m_scopeFinalp->dontCombine(true);
-	    m_scopeFinalp->formCallTree(true);
-	    m_scopeFinalp->slow(true);
-	    m_namer.scopep()->addActivep(m_scopeFinalp);
-	}
-	nodep->unlinkFrBack();
-	m_scopeFinalp->addStmtsp(new AstComment(nodep->fileline(), nodep->typeName()));
-	m_scopeFinalp->addStmtsp(nodep->bodysp()->unlinkFrBackWithNext());
-	nodep->deleteTree(); VL_DANGLING(nodep);
+        // Relink to CFUNC for the final
+        UINFO(4,"    FINAL "<<nodep<<endl);
+        if (!nodep->bodysp()) {  // Empty, Kill it.
+            nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
+            return;
+        }
+        ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_INITIAL);
+        if (!m_scopeFinalp) {
+            m_scopeFinalp = new AstCFunc(
+                nodep->fileline(), "_final_"+m_namer.scopep()->nameDotless(),
+                m_namer.scopep());
+            m_scopeFinalp->argTypes(EmitCBaseVisitor::symClassVar());
+            m_scopeFinalp->addInitsp(
+                new AstCStmt(nodep->fileline(), EmitCBaseVisitor::symTopAssign()+"\n"));
+            m_scopeFinalp->dontCombine(true);
+            m_scopeFinalp->formCallTree(true);
+            m_scopeFinalp->slow(true);
+            m_namer.scopep()->addActivep(m_scopeFinalp);
+        }
+        nodep->unlinkFrBack();
+        m_scopeFinalp->addStmtsp(new AstComment(nodep->fileline(), nodep->typeName()));
+        m_scopeFinalp->addStmtsp(nodep->bodysp()->unlinkFrBackWithNext());
+        nodep->deleteTree(); VL_DANGLING(nodep);
     }
 
     // METHODS
     void visitAlways(AstNode* nodep, AstSenTree* oldsensesp, VAlwaysKwd kwd) {
-	// Move always to appropriate ACTIVE based on its sense list
-	if (oldsensesp
-	    && oldsensesp->sensesp()
+        // Move always to appropriate ACTIVE based on its sense list
+        if (oldsensesp
+            && oldsensesp->sensesp()
             && VN_IS(oldsensesp->sensesp(), SenItem)
             && VN_CAST(oldsensesp->sensesp(), SenItem)->isNever()) {
-	    // Never executing.  Kill it.
-	    if (oldsensesp->sensesp()->nextp()) nodep->v3fatalSrc("Never senitem should be alone, else the never should be eliminated.");
-	    nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
-	    return;
-	}
+            // Never executing.  Kill it.
+            UASSERT_OBJ(!oldsensesp->sensesp()->nextp(), nodep,
+                        "Never senitem should be alone, else the never should be eliminated.");
+            nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
+            return;
+        }
 
-	// Read sensitivitues
-	m_itemCombo = false;
-	m_itemSequent = false;
+        // Read sensitivitues
+        m_itemCombo = false;
+        m_itemSequent = false;
         iterateAndNextNull(oldsensesp);
-	bool combo = m_itemCombo;
-	bool sequent = m_itemSequent;
+        bool combo = m_itemCombo;
+        bool sequent = m_itemSequent;
 
-	if (!combo && !sequent) combo=true;	// If no list, Verilog 2000: always @ (*)
-	if (combo && sequent) {
-	    if (!v3Global.opt.bboxUnsup()) {
-		nodep->v3error("Unsupported: Mixed edge (pos/negedge) and activity (no edge) sensitive activity list");
-	    }
-	    sequent = false;
-	}
+        if (!combo && !sequent) combo=true;  // If no list, Verilog 2000: always @ (*)
+        if (combo && sequent) {
+            if (!v3Global.opt.bboxUnsup()) {
+                nodep->v3error("Unsupported: Mixed edge (pos/negedge) and activity (no edge) sensitive activity list");
+            }
+            sequent = false;
+        }
 
-	AstActive* wantactivep = NULL;
-	if (combo && !sequent) {
-	    // Combo:  Relink to ACTIVE(combo)
-	    wantactivep = m_namer.getCActive(nodep->fileline());
-	} else {
-	    // Sequential: Build a ACTIVE(name)
-	    // OPTIMIZE: We could substitute a constant for things in the sense list, for example
-	    // always (posedge RESET) { if (RESET).... }  we know RESET is true.
-	    // Summarize a long list of combo inputs as just "combo"
-#ifndef __COVERITY__ // Else dead code on next line.
-	    if (combo) oldsensesp->addSensesp
-			   (new AstSenItem(nodep->fileline(),AstSenItem::Combo()));
+        AstActive* wantactivep = NULL;
+        if (combo && !sequent) {
+            // Combo:  Relink to ACTIVE(combo)
+            wantactivep = m_namer.getCActive(nodep->fileline());
+        } else {
+            // Sequential: Build a ACTIVE(name)
+            // OPTIMIZE: We could substitute a constant for things in the sense list, for example
+            // always (posedge RESET) { if (RESET).... }  we know RESET is true.
+            // Summarize a long list of combo inputs as just "combo"
+#ifndef __COVERITY__  // Else dead code on next line.
+            if (combo) oldsensesp->addSensesp
+                           (new AstSenItem(nodep->fileline(), AstSenItem::Combo()));
 #endif
-	    wantactivep = m_namer.getActive(nodep->fileline(), oldsensesp);
-	}
+            wantactivep = m_namer.getActive(nodep->fileline(), oldsensesp);
+        }
 
-	// Delete sensitivity list
-	if (oldsensesp) {
-	    oldsensesp->unlinkFrBackWithNext()->deleteTree(); VL_DANGLING(oldsensesp);
-	}
+        // Delete sensitivity list
+        if (oldsensesp) {
+            oldsensesp->unlinkFrBackWithNext()->deleteTree(); VL_DANGLING(oldsensesp);
+        }
 
-	// Move node to new active
-	nodep->unlinkFrBack();
-	wantactivep->addStmtsp(nodep);
+        // Move node to new active
+        nodep->unlinkFrBack();
+        wantactivep->addStmtsp(nodep);
 
-	// Warn and/or convert any delayed assignments
-	if (combo && !sequent) {
-	    if (kwd == VAlwaysKwd::ALWAYS_LATCH) {
-		ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_LATCH);
-	    } else {
-		ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_COMBO);
-	    }
-	}
-	else if (!combo && sequent) {
-	    ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_SEQ);
-	}
+        // Warn and/or convert any delayed assignments
+        if (combo && !sequent) {
+            if (kwd == VAlwaysKwd::ALWAYS_LATCH) {
+                ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_LATCH);
+            } else {
+                ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_COMBO);
+            }
+        }
+        else if (!combo && sequent) {
+            ActiveDlyVisitor dlyvisitor (nodep, ActiveDlyVisitor::CT_SEQ);
+        }
     }
     virtual void visit(AstAlways* nodep) {
-	// Move always to appropriate ACTIVE based on its sense list
-	UINFO(4,"    ALW   "<<nodep<<endl);
-	//if (debug()>=9) nodep->dumpTree(cout,"  Alw: ");
+        // Move always to appropriate ACTIVE based on its sense list
+        UINFO(4,"    ALW   "<<nodep<<endl);
+        //if (debug()>=9) nodep->dumpTree(cout, "  Alw: ");
 
-	if (!nodep->bodysp()) {
-	    // Empty always.  Kill it.
-	    nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
-	    return;
-	}
-	visitAlways(nodep, nodep->sensesp(), nodep->keyword());
+        if (!nodep->bodysp()) {
+            // Empty always.  Kill it.
+            nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
+            return;
+        }
+        visitAlways(nodep, nodep->sensesp(), nodep->keyword());
     }
     virtual void visit(AstAlwaysPublic* nodep) {
-	// Move always to appropriate ACTIVE based on its sense list
-	UINFO(4,"    ALWPub   "<<nodep<<endl);
-	//if (debug()>=9) nodep->dumpTree(cout,"  Alw: ");
-	visitAlways(nodep, nodep->sensesp(), VAlwaysKwd::ALWAYS);
+        // Move always to appropriate ACTIVE based on its sense list
+        UINFO(4,"    ALWPub   "<<nodep<<endl);
+        //if (debug()>=9) nodep->dumpTree(cout, "  Alw: ");
+        visitAlways(nodep, nodep->sensesp(), VAlwaysKwd::ALWAYS);
     }
     virtual void visit(AstSenGate* nodep) {
-	AstSenItem* subitemp = nodep->sensesp();
-	if (subitemp->edgeType() != AstEdgeType::ET_ANYEDGE
-	    && subitemp->edgeType() != AstEdgeType::ET_POSEDGE
-	    && subitemp->edgeType() != AstEdgeType::ET_NEGEDGE) {
-	    nodep->v3fatalSrc("Strange activity type under SenGate");
-	}
+        AstSenItem* subitemp = nodep->sensesp();
+        UASSERT_OBJ(subitemp->edgeType() == AstEdgeType::ET_ANYEDGE
+                    || subitemp->edgeType() == AstEdgeType::ET_POSEDGE
+                    || subitemp->edgeType() == AstEdgeType::ET_NEGEDGE,
+                    nodep, "Strange activity type under SenGate");
         iterateChildren(nodep);
     }
     virtual void visit(AstSenItem* nodep) {
-	if (nodep->edgeType() == AstEdgeType::ET_ANYEDGE) {
-	    m_itemCombo = true;
-	    // Delete the sensitivity
-	    // We'll add it as a generic COMBO SenItem in a moment.
-	    nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
-	} else if (nodep->varrefp()) {
-	    // V3LinkResolve should have cleaned most of these up
-	    if (!nodep->varrefp()->width1()) nodep->v3error("Unsupported: Non-single bit wide signal pos/negedge sensitivity: "
-							    <<nodep->varrefp()->prettyName());
-	    m_itemSequent = true;
-	    nodep->varrefp()->varp()->usedClock(true);
-	}
+        if (nodep->edgeType() == AstEdgeType::ET_ANYEDGE) {
+            m_itemCombo = true;
+            // Delete the sensitivity
+            // We'll add it as a generic COMBO SenItem in a moment.
+            nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
+        } else if (nodep->varrefp()) {
+            // V3LinkResolve should have cleaned most of these up
+            if (!nodep->varrefp()->width1()) {
+                nodep->v3error("Unsupported: Non-single bit wide signal pos/negedge sensitivity: "
+                               <<nodep->varrefp()->prettyNameQ());
+            }
+            m_itemSequent = true;
+            nodep->varrefp()->varp()->usedClock(true);
+        }
     }
 
     // Empty visitors, speed things up
@@ -418,9 +425,9 @@ private:
 public:
     // CONSTUCTORS
     explicit ActiveVisitor(AstNetlist* nodep) {
-	m_scopeFinalp = NULL;
-	m_itemCombo = false;
-	m_itemSequent = false;
+        m_scopeFinalp = NULL;
+        m_itemCombo = false;
+        m_itemSequent = false;
         iterate(nodep);
     }
     virtual ~ActiveVisitor() {}

src/V3Active.h

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -34,4 +34,4 @@ public:
     static void activeAll(AstNetlist* nodep);
 };
 
-#endif // Guard
+#endif  // Guard

src/V3ActiveTop.cpp

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -21,9 +21,9 @@
 //
 // Note this can be called multiple times.
 //   Across all ACTIVES
-//	SenTrees are now under each ACTIVE statement, we want them global:
-//	    Find SenTree in under global TopScope, or create it there
-//	    Move SenTree the global SenTree
+//      SenTrees are now under each ACTIVE statement, we want them global:
+//          Find SenTree in under global TopScope, or create it there
+//          Move SenTree the global SenTree
 //
 //*************************************************************************
 
@@ -43,91 +43,93 @@ class ActiveTopVisitor : public AstNVisitor {
 private:
     // NODE STATE
     //  Entire netlist
-    //   AstNode::user()		bool. True if processed
+    //   AstNode::user()                bool. True if processed
     //  Each call to V3Const::constify
-    //   AstNode::user4()		Used by V3Const::constify, called below
-    AstUser1InUse	m_inuser1;
+    //   AstNode::user4()               Used by V3Const::constify, called below
+    AstUser1InUse       m_inuser1;
 
     // STATE
-    AstTopScope*	m_topscopep;	// Top scope for adding sentrees under
-    SenTreeFinder	m_finder;	// Find global sentree's and add them
+    AstTopScope*        m_topscopep;    // Top scope for adding sentrees under
+    SenTreeFinder       m_finder;       // Find global sentree's and add them
 
     // METHODS
     VL_DEBUG_FUNC;  // Declare debug()
 
     // VISITORS
     virtual void visit(AstTopScope* nodep) {
-	m_topscopep = nodep;
-	m_finder.main(m_topscopep);
+        m_topscopep = nodep;
+        m_finder.main(m_topscopep);
         iterateChildren(nodep);
-	m_topscopep = NULL;
+        m_topscopep = NULL;
     }
     virtual void visit(AstNodeModule* nodep) {
-	// Create required actives and add to module
-	// We can start ordering at a module, or a scope
-	UINFO(4," MOD   "<<nodep<<endl);
+        // Create required actives and add to module
+        // We can start ordering at a module, or a scope
+        UINFO(4," MOD   "<<nodep<<endl);
         iterateChildren(nodep);
     }
     virtual void visit(AstActive* nodep) {
-	UINFO(4,"   ACTIVE "<<nodep<<endl);
-	V3Const::constifyExpensiveEdit(nodep); // Remove duplicate clocks and such; sensesp() may change!
-	AstSenTree* sensesp = nodep->sensesp();
-	if (!sensesp) nodep->v3fatalSrc("NULL");
-	if (sensesp->sensesp()
+        UINFO(4,"   ACTIVE "<<nodep<<endl);
+        V3Const::constifyExpensiveEdit(nodep);  // Remove duplicate clocks and such; sensesp() may change!
+        AstSenTree* sensesp = nodep->sensesp();
+        UASSERT_OBJ(sensesp, nodep, "NULL");
+        if (sensesp->sensesp()
             && VN_IS(sensesp->sensesp(), SenItem)
             && VN_CAST(sensesp->sensesp(), SenItem)->isNever()) {
-	    // Never executing.  Kill it.
-	    if (sensesp->sensesp()->nextp()) nodep->v3fatalSrc("Never senitem should be alone, else the never should be eliminated.");
-	    nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
-	    return;
-	}
-	// Copy combo tree to settlement tree with duplicated statements
-	if (sensesp->hasCombo()) {
-	    AstSenTree* newsentreep
+            // Never executing.  Kill it.
+            UASSERT_OBJ(!sensesp->sensesp()->nextp(), nodep,
+                        "Never senitem should be alone, else the never should be eliminated.");
+            nodep->unlinkFrBack()->deleteTree(); VL_DANGLING(nodep);
+            return;
+        }
+        // Copy combo tree to settlement tree with duplicated statements
+        if (sensesp->hasCombo()) {
+            AstSenTree* newsentreep
                 = new AstSenTree(nodep->fileline(),
-                                 new AstSenItem (nodep->fileline(), AstSenItem::Settle()));
-	    AstActive* newp = new AstActive(nodep->fileline(),"settle", newsentreep);
-	    newp->sensesStorep(newsentreep);
-	    if (nodep->stmtsp()) newp->addStmtsp(nodep->stmtsp()->cloneTree(true));
-	    nodep->addNextHere(newp);
-	}
-	// Move the SENTREE for each active up to the global level.
-	// This way we'll easily see what clock domains are identical
-	AstSenTree* wantp = m_finder.getSenTree(nodep->fileline(), sensesp);
-	UINFO(4,"   lookdone\n");
-	if (wantp != sensesp) {
-	    // Move the active's contents to the other active
-	    UINFO(4,"   merge active "<<sensesp<<" into "<<wantp<<endl);
-	    if (nodep->sensesStorep()) {
-		if (sensesp != nodep->sensesStorep()) nodep->v3fatalSrc("sensesStore should have been deleted earlier if different");
-		sensesp->unlinkFrBack();
-		// There may be other references to same sense tree,
-		// we'll be removing all references when we get to them,
-		// but don't dangle our pointer yet!
-		pushDeletep(sensesp);
-	    }
-	    nodep->sensesp(wantp);
-	}
-	// No need to do statements under it, they're already moved.
+                                 new AstSenItem(nodep->fileline(), AstSenItem::Settle()));
+            AstActive* newp = new AstActive(nodep->fileline(),"settle", newsentreep);
+            newp->sensesStorep(newsentreep);
+            if (nodep->stmtsp()) newp->addStmtsp(nodep->stmtsp()->cloneTree(true));
+            nodep->addNextHere(newp);
+        }
+        // Move the SENTREE for each active up to the global level.
+        // This way we'll easily see what clock domains are identical
+        AstSenTree* wantp = m_finder.getSenTree(nodep->fileline(), sensesp);
+        UINFO(4,"   lookdone\n");
+        if (wantp != sensesp) {
+            // Move the active's contents to the other active
+            UINFO(4,"   merge active "<<sensesp<<" into "<<wantp<<endl);
+            if (nodep->sensesStorep()) {
+                UASSERT_OBJ(sensesp == nodep->sensesStorep(), nodep,
+                            "sensesStore should have been deleted earlier if different");
+                sensesp->unlinkFrBack();
+                // There may be other references to same sense tree,
+                // we'll be removing all references when we get to them,
+                // but don't dangle our pointer yet!
+                pushDeletep(sensesp);
+            }
+            nodep->sensesp(wantp);
+        }
+        // No need to do statements under it, they're already moved.
         //iterateChildren(nodep);
     }
-    virtual void visit(AstInitial* nodep) {
-	nodep->v3fatalSrc("Node should have been under ACTIVE");
+    virtual void visit(AstInitial* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been under ACTIVE");
     }
-    virtual void visit(AstAssignAlias* nodep) {
-	nodep->v3fatalSrc("Node should have been under ACTIVE");
+    virtual void visit(AstAssignAlias* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been under ACTIVE");
     }
-    virtual void visit(AstAssignW* nodep) {
-	nodep->v3fatalSrc("Node should have been under ACTIVE");
+    virtual void visit(AstAssignW* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been under ACTIVE");
     }
-    virtual void visit(AstAlways* nodep) {
-	nodep->v3fatalSrc("Node should have been under ACTIVE");
+    virtual void visit(AstAlways* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been under ACTIVE");
     }
-    virtual void visit(AstAlwaysPublic* nodep) {
-	nodep->v3fatalSrc("Node should have been under ACTIVE");
+    virtual void visit(AstAlwaysPublic* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been under ACTIVE");
     }
-    virtual void visit(AstFinal* nodep) {
-	nodep->v3fatalSrc("Node should have been deleted");
+    virtual void visit(AstFinal* nodep) {  // LCOV_EXCL_LINE
+        nodep->v3fatalSrc("Node should have been deleted");
     }
     // Empty visitors, speed things up
     virtual void visit(AstNodeMath* nodep) {}
@@ -139,7 +141,7 @@ private:
 public:
     // CONSTUCTORS
     explicit ActiveTopVisitor(AstNetlist* nodep) {
-	m_topscopep = NULL;
+        m_topscopep = NULL;
         iterate(nodep);
     }
     virtual ~ActiveTopVisitor() {}

src/V3ActiveTop.h

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -34,4 +34,4 @@ public:
     static void activeTopAll(AstNetlist* nodep);
 };
 
-#endif // Guard
+#endif  // Guard

src/V3Assert.cpp

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2005-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2005-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -37,46 +37,46 @@ class AssertVisitor : public AstNVisitor {
 private:
     // NODE STATE/TYPES
     // Cleared on netlist
-    //  AstNode::user()		-> bool.  True if processed
-    AstUser1InUse	m_inuser1;
+    //  AstNode::user()         -> bool.  True if processed
+    AstUser1InUse       m_inuser1;
 
     // STATE
-    AstNodeModule*	m_modp;		// Last module
-    AstBegin*	m_beginp;	// Last begin
+    AstNodeModule*      m_modp;         // Last module
+    AstBegin*   m_beginp;       // Last begin
     unsigned    m_modPastNum;   // Module past numbering
-    V3Double0	m_statAsCover;	// Statistic tracking
-    V3Double0	m_statAsPsl;	// Statistic tracking
-    V3Double0	m_statAsFull;	// Statistic tracking
-    V3Double0	m_statAsSV;	// Statistic tracking
+    V3Double0   m_statAsCover;  // Statistic tracking
+    V3Double0   m_statAsPsl;    // Statistic tracking
+    V3Double0   m_statAsFull;   // Statistic tracking
+    V3Double0   m_statAsSV;     // Statistic tracking
 
     // METHODS
     string assertDisplayMessage(AstNode* nodep, const string& prefix, const string& message) {
-	return (string("[%0t] "+prefix+": ")+nodep->fileline()->filebasename()
-		+":"+cvtToStr(nodep->fileline()->lineno())
-		+": Assertion failed in %m"
-		+((message != "")?": ":"")+message
-		+"\n");
+        return (string("[%0t] "+prefix+": ")+nodep->fileline()->filebasename()
+                +":"+cvtToStr(nodep->fileline()->lineno())
+                +": Assertion failed in %m"
+                +((message != "")?": ":"")+message
+                +"\n");
     }
     void replaceDisplay(AstDisplay* nodep, const string& prefix) {
-	nodep->displayType(AstDisplayType::DT_WRITE);
-	nodep->fmtp()->text(assertDisplayMessage(nodep, prefix, nodep->fmtp()->text()));
-	// cppcheck-suppress nullPointer
-	AstNode* timenewp = new AstTime(nodep->fileline());
-	if (AstNode* timesp = nodep->fmtp()->exprsp()) {
-	    timesp->unlinkFrBackWithNext();
-	    timenewp->addNext(timesp);
-	}
-	nodep->fmtp()->addExprsp(timenewp);
-	if (!nodep->fmtp()->scopeNamep() && nodep->fmtp()->formatScopeTracking()) {
-	    nodep->fmtp()->scopeNamep(new AstScopeName(nodep->fileline()));
-	}
+        nodep->displayType(AstDisplayType::DT_WRITE);
+        nodep->fmtp()->text(assertDisplayMessage(nodep, prefix, nodep->fmtp()->text()));
+        // cppcheck-suppress nullPointer
+        AstNode* timenewp = new AstTime(nodep->fileline());
+        if (AstNode* timesp = nodep->fmtp()->exprsp()) {
+            timesp->unlinkFrBackWithNext();
+            timenewp->addNext(timesp);
+        }
+        nodep->fmtp()->addExprsp(timenewp);
+        if (!nodep->fmtp()->scopeNamep() && nodep->fmtp()->formatScopeTracking()) {
+            nodep->fmtp()->scopeNamep(new AstScopeName(nodep->fileline()));
+        }
     }
 
     AstNode* newIfAssertOn(AstNode* nodep) {
-	// Add a internal if to check assertions are on.
-	// Don't make this a AND term, as it's unlikely to need to test this.
+        // Add a internal if to check assertions are on.
+        // Don't make this a AND term, as it's unlikely to need to test this.
         FileLine* fl = nodep->fileline();
-	AstNode* newp
+        AstNode* newp
             = new AstIf(fl,
                         // If assertions are off, have constant propagation rip them out later
                         // This allows syntax errors and such to be detected normally.
@@ -84,46 +84,47 @@ private:
                          ? static_cast<AstNode*>(new AstCMath(fl, "Verilated::assertOn()", 1))
                          : static_cast<AstNode*>(new AstConst(fl, AstConst::LogicFalse()))),
                         nodep, NULL);
-	newp->user1(true); // Don't assert/cover this if
-	return newp;
+        newp->user1(true);  // Don't assert/cover this if
+        return newp;
     }
 
     AstNode* newFireAssertUnchecked(AstNode* nodep, const string& message) {
         // Like newFireAssert() but omits the asserts-on check
-        AstDisplay* dispp = new AstDisplay(nodep->fileline(), AstDisplayType::DT_ERROR, message, NULL, NULL);
-	AstNode* bodysp = dispp;
-	replaceDisplay(dispp, "%%Error");   // Convert to standard DISPLAY format
+        AstDisplay* dispp = new AstDisplay(nodep->fileline(),
+                                           AstDisplayType::DT_ERROR, message, NULL, NULL);
+        AstNode* bodysp = dispp;
+        replaceDisplay(dispp, "%%Error");  // Convert to standard DISPLAY format
         bodysp->addNext(new AstStop(nodep->fileline()));
         return bodysp;
     }
 
     AstNode* newFireAssert(AstNode* nodep, const string& message) {
         AstNode* bodysp = newFireAssertUnchecked(nodep, message);
-	bodysp = newIfAssertOn(bodysp);
-	return bodysp;
+        bodysp = newIfAssertOn(bodysp);
+        return bodysp;
     }
 
     void newPslAssertion(AstNode* nodep, AstNode* propp, AstSenTree* sentreep,
-			 AstNode* stmtsp, const string& message) {
-	propp->unlinkFrBack();
-	sentreep->unlinkFrBack();
-	if (stmtsp) stmtsp->unlinkFrBack();
-	//
-	AstNode* bodysp = NULL;
-	bool selfDestruct = false;
+                         AstNode* stmtsp, const string& message) {
+        propp->unlinkFrBack();
+        sentreep->unlinkFrBack();
+        if (stmtsp) stmtsp->unlinkFrBack();
+        //
+        AstNode* bodysp = NULL;
+        bool selfDestruct = false;
         AstIf* ifp = NULL;
         if (AstPslCover* snodep = VN_CAST(nodep, PslCover)) {
             ++m_statAsCover;
-	    if (!v3Global.opt.coverageUser()) {
-		selfDestruct = true;
-	    } else {
-		// V3Coverage assigned us a bucket to increment.
+            if (!v3Global.opt.coverageUser()) {
+                selfDestruct = true;
+            } else {
+                // V3Coverage assigned us a bucket to increment.
                 AstCoverInc* covincp = VN_CAST(snodep->coverincp(), CoverInc);
-		if (!covincp) snodep->v3fatalSrc("Missing AstCoverInc under assertion");
-		covincp->unlinkFrBack();
-		if (message!="") covincp->declp()->comment(message);
-		bodysp = covincp;
-	    }
+                UASSERT_OBJ(covincp, snodep, "Missing AstCoverInc under assertion");
+                covincp->unlinkFrBack();
+                if (message!="") covincp->declp()->comment(message);
+                bodysp = covincp;
+            }
 
             if (bodysp && stmtsp) bodysp = bodysp->addNext(stmtsp);
             ifp = new AstIf(nodep->fileline(), propp, bodysp, NULL);
@@ -148,163 +149,167 @@ private:
             // IEEE says simulator ignores these
             pushDeletep(nodep->unlinkFrBack()); VL_DANGLING(nodep);
             return;
-	} else {
-	    nodep->v3fatalSrc("Unknown node type");
-	}
+        } else {
+            nodep->v3fatalSrc("Unknown node type");
+        }
 
         AstNode* newp = new AstAlways(nodep->fileline(),
                                       VAlwaysKwd::ALWAYS, sentreep, bodysp);
-	// Install it
-	if (selfDestruct) {
-	    // Delete it after making the tree.  This way we can tell the user
-	    // if it wasn't constructed nicely or has other errors without needing --coverage.
-	    newp->deleteTree();
-	    nodep->unlinkFrBack();
-	} else {
-	    nodep->replaceWith(newp);
-	}
-	// Bye
-	pushDeletep(nodep); VL_DANGLING(nodep);
+        // Install it
+        if (selfDestruct) {
+            // Delete it after making the tree.  This way we can tell the user
+            // if it wasn't constructed nicely or has other errors without needing --coverage.
+            newp->deleteTree();
+            nodep->unlinkFrBack();
+        } else {
+            nodep->replaceWith(newp);
+        }
+        // Bye
+        pushDeletep(nodep); VL_DANGLING(nodep);
     }
 
     void newVAssertion(AstVAssert* nodep, AstNode* propp) {
-	propp->unlinkFrBackWithNext();
-	AstNode* passsp = nodep->passsp(); if (passsp) passsp->unlinkFrBackWithNext();
-	AstNode* failsp = nodep->failsp(); if (failsp) failsp->unlinkFrBackWithNext();
-	//
+        propp->unlinkFrBackWithNext();
+        AstNode* passsp = nodep->passsp(); if (passsp) passsp->unlinkFrBackWithNext();
+        AstNode* failsp = nodep->failsp(); if (failsp) failsp->unlinkFrBackWithNext();
+        //
         if (VN_IS(nodep, VAssert)) {
-	    if (passsp) passsp = newIfAssertOn(passsp);
-	    if (failsp) failsp = newIfAssertOn(failsp);
-	} else {
-	    nodep->v3fatalSrc("Unknown node type");
-	}
+            if (passsp) passsp = newIfAssertOn(passsp);
+            if (failsp) failsp = newIfAssertOn(failsp);
+        } else {
+            nodep->v3fatalSrc("Unknown node type");
+        }
 
         AstIf* ifp = new AstIf(nodep->fileline(), propp, passsp, failsp);
-	AstNode* newp = ifp;
+        AstNode* newp = ifp;
         if (VN_IS(nodep, VAssert)) ifp->branchPred(AstBranchPred::BP_UNLIKELY);
-	//
-	// Install it
-	nodep->replaceWith(newp);
-	// Bye
-	pushDeletep(nodep); VL_DANGLING(nodep);
+        //
+        // Install it
+        nodep->replaceWith(newp);
+        // Bye
+        pushDeletep(nodep); VL_DANGLING(nodep);
     }
 
     // VISITORS
     virtual void visit(AstIf* nodep) {
-	if (nodep->user1SetOnce()) return;
-	if (nodep->uniquePragma() || nodep->unique0Pragma()) {
-	    AstNodeIf* ifp = nodep;
-	    AstNode* propp = NULL;
-	    bool hasDefaultElse = false;
-	    do {
-		// If this statement ends with 'else if', then nextIf will point to the
-		// nextIf statement.  Otherwise it will be null.
-		AstNodeIf* nextifp = dynamic_cast<AstNodeIf*>(ifp->elsesp());
+        if (nodep->user1SetOnce()) return;
+        if (nodep->uniquePragma() || nodep->unique0Pragma()) {
+            AstNodeIf* ifp = nodep;
+            AstNode* propp = NULL;
+            bool hasDefaultElse = false;
+            do {
+                // If this statement ends with 'else if', then nextIf will point to the
+                // nextIf statement.  Otherwise it will be null.
+                AstNodeIf* nextifp = dynamic_cast<AstNodeIf*>(ifp->elsesp());
                 iterateAndNextNull(ifp->condp());
 
-		// Recurse into the true case.
+                // Recurse into the true case.
                 iterateAndNextNull(ifp->ifsp());
 
-		// If the last else is not an else if, recurse into that too.
-		if (ifp->elsesp() && !nextifp) {
+                // If the last else is not an else if, recurse into that too.
+                if (ifp->elsesp() && !nextifp) {
                     iterateAndNextNull(ifp->elsesp());
-		}
+                }
 
-		// Build a bitmask of the true predicates
-	        AstNode* predp = ifp->condp()->cloneTree(false);
-	        if (propp) {
-		    propp = new AstConcat(nodep->fileline(), predp, propp);
-		} else {
-		    propp = predp;
-		}
+                // Build a bitmask of the true predicates
+                AstNode* predp = ifp->condp()->cloneTree(false);
+                if (propp) {
+                    propp = new AstConcat(nodep->fileline(), predp, propp);
+                } else {
+                    propp = predp;
+                }
 
-		// Record if this ends with an 'else' that does not have an if
-		if (ifp->elsesp() && !nextifp) {
-		    hasDefaultElse = true;
-		}
+                // Record if this ends with an 'else' that does not have an if
+                if (ifp->elsesp() && !nextifp) {
+                    hasDefaultElse = true;
+                }
 
-		ifp = nextifp;
-	    } while (ifp);
+                ifp = nextifp;
+            } while (ifp);
 
-	    AstNode *newifp = nodep->cloneTree(false);
-	    bool allow_none = nodep->unique0Pragma();
+            AstNode *newifp = nodep->cloneTree(false);
+            bool allow_none = nodep->unique0Pragma();
 
-	    // Empty case means no property
-	    if (!propp) propp = new AstConst(nodep->fileline(), AstConst::LogicFalse());
+            // Empty case means no property
+            if (!propp) propp = new AstConst(nodep->fileline(), AstConst::LogicFalse());
 
-	    // Note: if this ends with an 'else', then we don't need to validate that one of the
-	    // predicates evaluates to true.
-	    AstNode* ohot = ((allow_none || hasDefaultElse)
-			     ? static_cast<AstNode*>(new AstOneHot0(nodep->fileline(), propp))
-			     : static_cast<AstNode*>(new AstOneHot (nodep->fileline(), propp)));
+            // Note: if this ends with an 'else', then we don't need to validate that one of the
+            // predicates evaluates to true.
+            AstNode* ohot = ((allow_none || hasDefaultElse)
+                             ? static_cast<AstNode*>(new AstOneHot0(nodep->fileline(), propp))
+                             : static_cast<AstNode*>(new AstOneHot(nodep->fileline(), propp)));
             AstIf* checkifp = new AstIf(nodep->fileline(),
                                         new AstLogNot(nodep->fileline(), ohot),
                                         newFireAssert(nodep, "'unique if' statement violated"),
                                         newifp);
-	    checkifp->branchPred(AstBranchPred::BP_UNLIKELY);
-	    nodep->replaceWith(checkifp);
-	    pushDeletep(nodep);
-	} else {
+            checkifp->branchPred(AstBranchPred::BP_UNLIKELY);
+            nodep->replaceWith(checkifp);
+            pushDeletep(nodep);
+        } else {
             iterateChildren(nodep);
-	}
+        }
     }
 
     //========== Case assertions
     virtual void visit(AstCase* nodep) {
         iterateChildren(nodep);
-	if (!nodep->user1SetOnce()) {
-	    bool has_default=false;
-            for (AstCaseItem* itemp = nodep->itemsp(); itemp; itemp=VN_CAST(itemp->nextp(), CaseItem)) {
-		if (itemp->isDefault()) has_default=true;
-	    }
-	    if (nodep->fullPragma() || nodep->priorityPragma()) {
-		// Simply need to add a default if there isn't one already
-		++m_statAsFull;
-		if (!has_default) {
-		    nodep->addItemsp(new AstCaseItem(nodep->fileline(), NULL/*DEFAULT*/,
-						     newFireAssert(nodep, "synthesis full_case, but non-match found")));
-		}
-	    }
-	    if (nodep->parallelPragma() || nodep->uniquePragma() || nodep->unique0Pragma()) {
-		// Need to check that one, and only one of the case items match at any moment
-		// If there's a default, we allow none to match, else exactly one must match
-		++m_statAsFull;
-		if (!has_default && !nodep->itemsp()) {
-		    // Not parallel, but harmlessly so.
-		} else {
-		    AstNode* propp = NULL;
-                    for (AstCaseItem* itemp = nodep->itemsp(); itemp; itemp=VN_CAST(itemp->nextp(), CaseItem)) {
-			for (AstNode* icondp = itemp->condsp(); icondp!=NULL; icondp=icondp->nextp()) {
-			    AstNode* onep;
-			    if (nodep->casex() || nodep->casez() || nodep->caseInside()) {
-				onep = AstEqWild::newTyped(itemp->fileline(),
-							   nodep->exprp()->cloneTree(false),
-							   icondp->cloneTree(false));
-			    } else {
-				onep = AstEq::newTyped(icondp->fileline(),
-						       nodep->exprp()->cloneTree(false),
-						       icondp->cloneTree(false));
-			    }
-			    if (propp) propp = new AstConcat(icondp->fileline(), onep, propp);
-			    else propp = onep;
-			}
-		    }
-		    // Empty case means no property
-		    if (!propp) propp = new AstConst(nodep->fileline(), AstConst::LogicFalse());
+        if (!nodep->user1SetOnce()) {
+            bool has_default = false;
+            for (AstCaseItem* itemp = nodep->itemsp();
+                 itemp; itemp = VN_CAST(itemp->nextp(), CaseItem)) {
+                if (itemp->isDefault()) has_default = true;
+            }
+            if (nodep->fullPragma() || nodep->priorityPragma()) {
+                // Simply need to add a default if there isn't one already
+                ++m_statAsFull;
+                if (!has_default) {
+                    nodep->addItemsp(new AstCaseItem(nodep->fileline(), NULL/*DEFAULT*/,
+                                                     newFireAssert(nodep, "synthesis full_case, but non-match found")));
+                }
+            }
+            if (nodep->parallelPragma() || nodep->uniquePragma() || nodep->unique0Pragma()) {
+                // Need to check that one, and only one of the case items match at any moment
+                // If there's a default, we allow none to match, else exactly one must match
+                ++m_statAsFull;
+                if (!has_default && !nodep->itemsp()) {
+                    // Not parallel, but harmlessly so.
+                } else {
+                    AstNode* propp = NULL;
+                    for (AstCaseItem* itemp = nodep->itemsp();
+                         itemp; itemp=VN_CAST(itemp->nextp(), CaseItem)) {
+                        for (AstNode* icondp = itemp->condsp();
+                             icondp!=NULL; icondp=icondp->nextp()) {
+                            AstNode* onep;
+                            if (nodep->casex() || nodep->casez() || nodep->caseInside()) {
+                                onep = AstEqWild::newTyped(itemp->fileline(),
+                                                           nodep->exprp()->cloneTree(false),
+                                                           icondp->cloneTree(false));
+                            } else {
+                                onep = AstEq::newTyped(icondp->fileline(),
+                                                       nodep->exprp()->cloneTree(false),
+                                                       icondp->cloneTree(false));
+                            }
+                            if (propp) propp = new AstConcat(icondp->fileline(), onep, propp);
+                            else propp = onep;
+                        }
+                    }
+                    // Empty case means no property
+                    if (!propp) propp = new AstConst(nodep->fileline(), AstConst::LogicFalse());
 
-		    bool allow_none = has_default || nodep->unique0Pragma();
-		    AstNode* ohot = (allow_none
-				     ? static_cast<AstNode*>(new AstOneHot0(nodep->fileline(), propp))
-				     : static_cast<AstNode*>(new AstOneHot (nodep->fileline(), propp)));
+                    bool allow_none = has_default || nodep->unique0Pragma();
+                    AstNode* ohot
+                        = (allow_none
+                           ? static_cast<AstNode*>(new AstOneHot0(nodep->fileline(), propp))
+                           : static_cast<AstNode*>(new AstOneHot(nodep->fileline(), propp)));
                     AstIf* ifp = new AstIf(nodep->fileline(),
                                            new AstLogNot(nodep->fileline(), ohot),
                                            newFireAssert(nodep, "synthesis parallel_case, but multiple matches found"),
                                            NULL);
-		    ifp->branchPred(AstBranchPred::BP_UNLIKELY);
-		    nodep->addNotParallelp(ifp);
-		}
-	    }
-	}
+                    ifp->branchPred(AstBranchPred::BP_UNLIKELY);
+                    nodep->addNotParallelp(ifp);
+                }
+            }
+        }
     }
 
     //========== Past
@@ -312,10 +317,11 @@ private:
         iterateChildren(nodep);
         uint32_t ticks = 1;
         if (nodep->ticksp()) {
-            if (!VN_IS(nodep->ticksp(), Const)) nodep->v3fatalSrc("Expected constant ticks, checked in V3Width");
+            UASSERT_OBJ(VN_IS(nodep->ticksp(), Const), nodep,
+                        "Expected constant ticks, checked in V3Width");
             ticks = VN_CAST(nodep->ticksp(), Const)->toUInt();
         }
-        if (ticks<1) nodep->v3fatalSrc("0 tick should have been checked in V3Width");
+        UASSERT_OBJ(ticks>=1, nodep, "0 tick should have been checked in V3Width");
         AstNode* inp = nodep->exprp()->unlinkFrBack();
         AstVar* invarp = NULL;
         AstSenTree* sentreep = nodep->sentreep(); sentreep->unlinkFrBack();
@@ -341,46 +347,46 @@ private:
     //========== Statements
     virtual void visit(AstDisplay* nodep) {
         iterateChildren(nodep);
-	// Replace the special types with standard text
-	if (nodep->displayType()==AstDisplayType::DT_INFO) {
-	    replaceDisplay(nodep, "-Info");
-	} else if (nodep->displayType()==AstDisplayType::DT_WARNING) {
-	    replaceDisplay(nodep, "%%Warning");
-	} else if (nodep->displayType()==AstDisplayType::DT_ERROR
-		   || nodep->displayType()==AstDisplayType::DT_FATAL) {
-	    replaceDisplay(nodep, "%%Error");
-	}
+        // Replace the special types with standard text
+        if (nodep->displayType()==AstDisplayType::DT_INFO) {
+            replaceDisplay(nodep, "-Info");
+        } else if (nodep->displayType()==AstDisplayType::DT_WARNING) {
+            replaceDisplay(nodep, "%%Warning");
+        } else if (nodep->displayType()==AstDisplayType::DT_ERROR
+                   || nodep->displayType()==AstDisplayType::DT_FATAL) {
+            replaceDisplay(nodep, "%%Error");
+        }
     }
 
     virtual void visit(AstNodePslCoverOrAssert* nodep) {
         iterateChildren(nodep);
-	if (m_beginp && nodep->name() == "") nodep->name(m_beginp->name());
-	newPslAssertion(nodep, nodep->propp(), nodep->sentreep(),
-			nodep->stmtsp(), nodep->name()); VL_DANGLING(nodep);
+        if (m_beginp && nodep->name() == "") nodep->name(m_beginp->name());
+        newPslAssertion(nodep, nodep->propp(), nodep->sentreep(),
+                        nodep->stmtsp(), nodep->name()); VL_DANGLING(nodep);
     }
     virtual void visit(AstVAssert* nodep) {
         iterateChildren(nodep);
-	newVAssertion(nodep, nodep->propp()); VL_DANGLING(nodep);
-	++m_statAsSV;
+        newVAssertion(nodep, nodep->propp()); VL_DANGLING(nodep);
+        ++m_statAsSV;
     }
 
     virtual void visit(AstNodeModule* nodep) {
-	m_modp = nodep;
+        m_modp = nodep;
         m_modPastNum = 0;
-	//
+        //
         iterateChildren(nodep);
-	// Reset defaults
-	m_modp = NULL;
+        // Reset defaults
+        m_modp = NULL;
     }
     virtual void visit(AstBegin* nodep) {
-	// This code is needed rather than a visitor in V3Begin,
-	// because V3Assert is called before V3Begin
-	AstBegin* lastp = m_beginp;
-	{
-	    m_beginp = nodep;
+        // This code is needed rather than a visitor in V3Begin,
+        // because V3Assert is called before V3Begin
+        AstBegin* lastp = m_beginp;
+        {
+            m_beginp = nodep;
             iterateChildren(nodep);
-	}
-	m_beginp = lastp;
+        }
+        m_beginp = lastp;
     }
 
     virtual void visit(AstNode* nodep) {
@@ -389,17 +395,17 @@ private:
 public:
     // CONSTRUCTORS
     explicit AssertVisitor(AstNetlist* nodep) {
-	m_beginp = NULL;
-	m_modp = NULL;
+        m_beginp = NULL;
+        m_modp = NULL;
         m_modPastNum = 0;
-	// Process
+        // Process
         iterate(nodep);
     }
     virtual ~AssertVisitor() {
-	V3Stats::addStat("Assertions, PSL asserts", m_statAsPsl);
-	V3Stats::addStat("Assertions, SystemVerilog asserts", m_statAsSV);
-	V3Stats::addStat("Assertions, cover statements", m_statAsCover);
-	V3Stats::addStat("Assertions, full/parallel case", m_statAsFull);
+        V3Stats::addStat("Assertions, PSL asserts", m_statAsPsl);
+        V3Stats::addStat("Assertions, SystemVerilog asserts", m_statAsSV);
+        V3Stats::addStat("Assertions, cover statements", m_statAsCover);
+        V3Stats::addStat("Assertions, full/parallel case", m_statAsFull);
     }
 };
 

src/V3Assert.h

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2005-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2005-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -34,4 +34,4 @@ public:
     static void assertAll(AstNetlist* nodep);
 };
 
-#endif // Guard
+#endif  // Guard

src/V3AssertPre.cpp

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2005-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2005-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -18,7 +18,7 @@
 //
 //*************************************************************************
 //  Pre steps:
-//	Attach clocks to each assertion
+//      Attach clocks to each assertion
 //*************************************************************************
 
 #include "config_build.h"
@@ -51,37 +51,37 @@ private:
     VL_DEBUG_FUNC;  // Declare debug()
 
     AstSenTree* newSenTree(AstNode* nodep) {
-	// Create sentree based on clocked or default clock
-	// Return NULL for always
-	AstSenTree* newp = NULL;
+        // Create sentree based on clocked or default clock
+        // Return NULL for always
+        AstSenTree* newp = NULL;
         AstNodeSenItem* senip = m_senip;
         if (!senip) senip = m_seniDefaultp;
         if (!senip) senip = m_seniAlwaysp;
-	if (!senip) {
-	    nodep->v3error("Unsupported: Unclocked assertion");
-	    newp = new AstSenTree(nodep->fileline(), NULL);
-	} else {
-	    newp = new AstSenTree(nodep->fileline(), senip->cloneTree(true));
-	}
-	return newp;
+        if (!senip) {
+            nodep->v3error("Unsupported: Unclocked assertion");
+            newp = new AstSenTree(nodep->fileline(), NULL);
+        } else {
+            newp = new AstSenTree(nodep->fileline(), senip->cloneTree(true));
+        }
+        return newp;
     }
     void clearAssertInfo() {
-	m_senip = NULL;
+        m_senip = NULL;
     }
 
     // VISITORS
     //========== Statements
     virtual void visit(AstClocking* nodep) {
-	UINFO(8,"   CLOCKING"<<nodep<<endl);
-	// Store the new default clock, reset on new module
-	m_seniDefaultp = nodep->sensesp();
-	// Trash it, keeping children
-	if (nodep->bodysp()) {
-	    nodep->replaceWith(nodep->bodysp()->unlinkFrBack());
-	} else {
-	    nodep->unlinkFrBack();
-	}
-	pushDeletep(nodep); VL_DANGLING(nodep);
+        UINFO(8,"   CLOCKING"<<nodep<<endl);
+        // Store the new default clock, reset on new module
+        m_seniDefaultp = nodep->sensesp();
+        // Trash it, keeping children
+        if (nodep->bodysp()) {
+            nodep->replaceWith(nodep->bodysp()->unlinkFrBack());
+        } else {
+            nodep->unlinkFrBack();
+        }
+        pushDeletep(nodep); VL_DANGLING(nodep);
     }
     virtual void visit(AstAlways* nodep) {
         iterateAndNextNull(nodep->sensesp());
@@ -93,12 +93,12 @@ private:
     }
 
     virtual void visit(AstNodePslCoverOrAssert* nodep) {
-	if (nodep->sentreep()) return;  // Already processed
-	clearAssertInfo();
+        if (nodep->sentreep()) return;  // Already processed
+        clearAssertInfo();
         // Find PslClocking's burried under nodep->exprsp
         iterateChildren(nodep);
-	nodep->sentreep(newSenTree(nodep));
-	clearAssertInfo();
+        nodep->sentreep(newSenTree(nodep));
+        clearAssertInfo();
     }
     virtual void visit(AstPast* nodep) {
         if (nodep->sentreep()) return;  // Already processed
@@ -108,26 +108,26 @@ private:
     virtual void visit(AstPslClocked* nodep) {
         // No need to iterate the body, once replace will get iterated
         iterateAndNextNull(nodep->sensesp());
-	if (m_senip) {
-	    nodep->v3error("Unsupported: Only one PSL clock allowed per assertion");
-	}
-	// Block is the new expression to evaluate
-	AstNode* blockp = nodep->propp()->unlinkFrBack();
-	if (nodep->disablep()) {
-	    blockp = new AstAnd(nodep->disablep()->fileline(),
-				new AstNot(nodep->disablep()->fileline(),
-					   nodep->disablep()->unlinkFrBack()),
-				blockp);
-	}
-	// Unlink and just keep a pointer to it, convert to sentree as needed
-	m_senip = nodep->sensesp();
-	nodep->replaceWith(blockp);
-	pushDeletep(nodep); VL_DANGLING(nodep);
+        if (m_senip) {
+            nodep->v3error("Unsupported: Only one PSL clock allowed per assertion");
+        }
+        // Block is the new expression to evaluate
+        AstNode* blockp = nodep->propp()->unlinkFrBack();
+        if (nodep->disablep()) {
+            blockp = new AstAnd(nodep->disablep()->fileline(),
+                                new AstNot(nodep->disablep()->fileline(),
+                                           nodep->disablep()->unlinkFrBack()),
+                                blockp);
+        }
+        // Unlink and just keep a pointer to it, convert to sentree as needed
+        m_senip = nodep->sensesp();
+        nodep->replaceWith(blockp);
+        pushDeletep(nodep); VL_DANGLING(nodep);
     }
     virtual void visit(AstNodeModule* nodep) {
         iterateChildren(nodep);
-	// Reset defaults
-	m_seniDefaultp = NULL;
+        // Reset defaults
+        m_seniDefaultp = NULL;
     }
     virtual void visit(AstNode* nodep) {
         iterateChildren(nodep);
@@ -136,10 +136,10 @@ private:
 public:
     // CONSTRUCTORS
     explicit AssertPreVisitor(AstNetlist* nodep) {
-	m_seniDefaultp = NULL;
+        m_seniDefaultp = NULL;
         m_seniAlwaysp = NULL;
-	clearAssertInfo();
-	// Process
+        clearAssertInfo();
+        // Process
         iterate(nodep);
     }
     virtual ~AssertPreVisitor() {}

src/V3AssertPre.h

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2005-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2005-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -34,4 +34,4 @@ public:
     static void assertPreAll(AstNetlist* nodep);
 };
 
-#endif // Guard
+#endif  // Guard

src/V3AstConstOnly.h

@@ -6,7 +6,7 @@
 //
 //*************************************************************************
 //
-// Copyright 2003-2018 by Wilson Snyder.  This program is free software; you can
+// Copyright 2003-2019 by Wilson Snyder.  This program is free software; you can
 // redistribute it and/or modify it under the terms of either the GNU
 // Lesser General Public License Version 3 or the Perl Artistic License
 // Version 2.0.
@@ -30,4 +30,4 @@
 #define deleteTree       error_no_deleteTree_in_ConstOnlyVisitor
 #define unlinkFrBack     error_no_unlinkFrBack_in_ConstOnlyVisitor
 
-#endif // Guard
+#endif  // Guard