This patch adds IEEE-1800 compliant scheduling support for the Inactive
scheduling region used for #0 delays.
Implementing this requires that **all** IEEE-1800 active region events
are placed in the internal 'act' section. This has simulation
performance implications. It prevents some optimizations (e.g.
V3LifePost), which reduces single threaded performance. It also reduces
the available work and parallelism in the internal 'nba' section, which
reduced the effectiveness of multi-threading severely.
Performance impact on RTLMeter when using scheduling adjusted to support
proper #0 delays is ~10-20% slowdown in single-threaded mode, and ~100%
(2x slower) with --threads 4.
To avoid paying this performance penalty unconditionally, the scheduling
is only adjusted if either:
1. The input contains a statically known #0 delay
2. The input contains a variable #x delay unknown at compile time
If no #0 is present, but #x variable delays are, a ZERODLY warning is
issued advising the use of '--no-sched-zero-delay' which is a promise
by the user that none of the variable delays will evaluate to a zero
delay at run-time. This warning is turned off if '--sched-zero-delay'
is explicitly given. This is similar to the '--timing' option.
If '--no-sched-zero-delay' was used at compile time, then executing
a zero delay will fail at runtime.
A ZERODLY warning is also issued if a static #0 if found, but the user
specified '--no-sched-zero-delay'. In this case the scheduling is not
adjusted to support #0, so executing it will fail at runtime. Presumably
the user knows it won't be executed.
The intended behaviour with all this is the following:
No #0, no #var in the design (#constant is OK)
-> Same as current behaviour, scheduling not adjusted,
same code generated as before
Has static #0 and '--no-sched-zero-delay' is NOT given:
-> No warnings, scheduling adjusted so it just works, runs slow
Has static #0 and '--no-sched-zero-delay' is given:
-> ZERODLY on the #0, scheduling not adjusted, fails at runtime if hit
No static #0, but has #var and no option is given:
-> ZERODLY on the #var advising use of '--no-sched-zero-delay' or
'--sched-zero-delay' (similar to '--timing'), scheduling adjusted
assuming it can be a zero delay and it just works
No static #0, but has #var and '--no-sched-zero-delay' is given:
-> No warning, scheduling not adjusted, fails at runtime if zero delay
No static #0, but has #var and '--sched-zero-delay' is given:
-> No warning, scheduling adjusted so it just works
Add a new Dfg pass 'pushDownSel'. This will try to move selects through
a tree of concatenations in order to eliminate temporary nodes holding
intermediate concatenation results. This can get rid of a lot of
variables when packed arrays are assigned in parts (e.g. bit-wise).
* logging for the unsatisfied constraints
* Apply 'make format'
* fix teh quote error in the array indexing
* Apply 'make format'
* Len change for the hash for randomity when named assertion is used
* seperate name assertion and satisfied case
* Apply 'make format'
* simply comments and display info
* refine code and fix protect case
* format
* update display in test and .out file
* add an enable flag and warning type, add a protect_id version test and update out files
* Apply 'make format'
* simplify some comments
* update out file, ready to be merged.
* update .py file to set the hash key solid
* rename and reformate the warning message to follow the verilator style
* add a nowarn test
* Apply 'make format'
* ordering
---------
Co-authored-by: Udaya Raj Subedi <075bei047.udaya@pcampus.edu.np>
Co-authored-by: github action <action@example.com>
Track the location based message/feature enable bits separately for code
and control file directives. A message/feature is disabled if disabled
either in the control file, or in code directives/metacomments. That is,
enabled only if both agree should be enabled.
Srinivasan Venkataramanan
Wilson Snyder
Geza Lore
Vikash Patel
Wei-Lun Chiu
Yilou Wang
Yangyu Chen
Luca Colagrande
Iztok Jeras
Jose Drowne
Dan Ruelas-Petrisko
Jakub Wasilewski