Commit Graph

56 Commits

Author SHA1 Message Date
Emard fa1d328b93 esp_usb_jtag: new cable
- copy dirtyjtag to esp_usb_jtag, it compiles
- copy protocol definiton, defines and private data/struct from openocd esp_usb_jtag.c
- ulx3s_esp board with esp32s3 cable
- esp_usb_jtag specify usb vid:pid in jtag.cpp
- hardcode usb interface and endpoints
- getting caps
- set chip id (not applicable for fpga)
- tms write done, untested
- cleanup and toggle clk
- 32bit counting
- setting divisor (todo read base freq)
- div range within 1-255
- base speed from descriptor
- fix doc typo with swapped tms/tdi some cleanup but it doesn't work.
2025-04-18 07:32:15 +02:00
Stéphane Potvin e3f315a121 Add support for Numato Systems Mimas A7 board. 2024-06-22 08:03:14 -04:00
Gwenhael Goavec-Merou 53578876d5 added support for Gowin GWU2X USB (JTAG mode) (#434) 2024-05-20 21:10:29 +02:00
Giovanni Bruni 2754e99215 cable: add FTDI FT4232HP mapping 2023-10-20 07:55:53 +02:00
Gwenhael Goavec-Merou e9b31425d6 cable: efinix jtag ft2232 variant 2023-10-03 06:48:47 +02:00
Alexey Starikovskiy 0fc8ba10a8 Add WCH CH347T(mode #3) JTAG cable
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2023-07-26 08:17:57 +02:00
Andrew Dennison ec82dd6467 jlink: support J-Link BASE and J-Trace PRO 2023-05-29 11:57:47 +10:00
Balint Cristian 933ed793e8 Add libgpiod v2 api support
Signed-off-by: Balint Cristian <cristian.balint@gmail.com>
2023-04-19 23:27:09 +03:00
chenzhuoyu cf04d64377 feat: option to use an extra GPIO as the status indicator 2023-04-11 00:36:16 +08:00
Gwenhael Goavec-Merou fd97c244d9 remoteBitbang_client: adding new protocol (client side) 2023-03-02 13:47:11 +01:00
Gwenhael Goavec-Merou 7f1f9445d4 cable: bus_addr, device_addr: int -> uint8_t 2023-02-25 17:10:01 +01:00
Cedric de Wijs 0bdef7bab1 typo's, added git as dependency 2022-12-18 13:56:54 +01:00
Gwenhael Goavec-Merou 106cdecc14
Merge pull request #260 from jeanbie0/jetson-nano-gpio
Add cable jetson-nano-gpio
2022-10-22 15:07:00 +02:00
Gwenhael Goavec-Merou 9e5fcdbe0d src/cable: rename bus/device to bus_addr/device_addr 2022-10-15 16:19:24 +02:00
Gwenhael Goavec-Merou 3e20dc7082 src/cable: rework cable list. move vid/pid from mpsse_bit_config to cable_t 2022-10-15 16:15:23 +02:00
J Biemar 5a7e73b586 Add cable jetson-nano-gpio 2022-10-14 11:15:02 +02:00
Gwenhael Goavec-Merou 93aa9f4dd3 cable: add lpc-link2 support 2022-08-29 21:03:30 +02:00
Diego Herranz f115608cb1 Add Steppenprobe cable
https://github.com/diegoherranz/steppenprobe

Config taken from OpenOCD repo:
https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/interface/ftdi/steppenprobe.cfg
2022-08-09 18:31:16 +02:00
Niklas Ekström f69ce8a465 Only show libgpiod cable in list if enabled 2022-07-22 10:01:23 +02:00
Niklas Ekström 12955b8711 Initial commit of libgpiod JTAG driver
Not tested yet.
2022-07-18 18:09:34 +02:00
Gwenhael Goavec-Merou 1f842e4ebc cable: add missing mpsse_bit_config index 2022-06-02 08:51:47 +02:00
Gwenhael Goavec-Merou 7bfce0fb2b xvc_client: Xilinx Virtual Cable client PoC 2022-04-10 16:02:39 +02:00
Stephan Ruloff b60f37b56d Support for the Papilio One board 2022-03-25 21:44:05 +01:00
Gwenhael Goavec-Merou 18100ec0f3 cable: new SEGGER J-Link support (PoC) 2022-03-12 18:46:23 +01:00
Gwenhael Goavec-Merou 74eb812c6d cable: digilent jtag-smt2-nc 2022-03-10 18:52:47 +01:00
Gwenhael Goavec-Merou fb2aadadad cable: adding Olimex ARM-USB-OCD-H 2022-01-20 19:37:50 +01:00
Patrick Urban d09e5da0ba colognechip integration: initial commit
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.

Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
Gwenhael Goavec-Merou f843dc2eb2 ch552_jtag: driver for ch552_jtag firmware (ft2232c clone) 2021-11-06 10:33:25 +01:00
Gwenhael Goavec-Merou 649554f3fd efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface 2021-10-23 08:44:23 +02:00
Florent Kermarrec 7d8c8b2dcb Add Trion T120 BGA 576 Dev Kit support.
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
Gwenhael Goavec-Merou 8f95303daf move to APACHE-2.0 license 2021-06-26 15:24:07 +02:00
Vegard Storheil Eriksen 7fc0703167 cable: Add support for Orbtrace. 2021-06-22 23:59:46 +02:00
Gwenhael Goavec-Merou 827767b99f add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode 2021-06-20 10:26:05 +02:00
Gwenhael Goavec-Merou 53c5d35da6 add cmsis dap (hid) support 2021-06-19 17:30:23 +02:00
ultraembedded dc003f6212 As per feedback, allow 232H devices to have upper bank pins configured on init. 2021-06-11 11:24:57 +01:00
ultraembedded 291f1b6d6f Add support for Digilent Digital Discovery and Analog Discovery 2 (openFPGALoader -c digilent_ad) 2021-06-10 22:38:17 +01:00
Gwenhael Goavec-Merou 49ba5f265a add support for usb-blasterII 2021-05-13 16:11:22 +02:00
Gwenhael Goavec-Merou 4e2b1aa73e cable: add SecuringHardware Tigard programmer 2021-03-27 18:43:56 +01:00
Gwenhael Goavec-Merou cd625d4c99 add efinix Xyloni support (spi mode only) 2021-01-21 07:11:10 +01:00
phdussud a11ec92a25 Fix gcc 10.2 error messages. 2020-12-12 15:48:45 -08:00
Giuseppe Gebbia edad461d88 add support for artix-7 200t and nexys video board 2020-10-15 16:07:55 +02:00
Gwenhael Goavec-Merou c41911d039 introduce anlogic JTAG adapter (tested with sipeed lichee tang 2020-08-20 16:57:25 +02:00
Gwenhael Goavec-Merou 4a3d1b3009 introduce intel usb blaster cable and de0nano board 2020-08-19 15:15:13 +02:00
Gwenhael Goavec-Merou 27b0c8a664 introduce DirtyJTAG cable 2020-06-14 15:41:00 +02:00
Jean THOMAS eeefe48284 Add support for ECPIX-5 2020-05-12 19:09:30 +02:00
Udi Finkelstein 4558f8b395 Fixed ordering to be alphabetical 2020-04-16 10:54:53 +03:00
Udi Finkelstein 8a212e9feb Fixed DangerousPrototype's Bus Blaster support (in JTAGkey mode).
The Bus Blaster uses an FT2232H with an on-board CPLD allowing it to
impersonate various JTAG probes.
This did not work until now because JTAGkey uses ADBUS4/GPIOL0 as ~CS
to enable the JTAG buffers on the on-board CPLD.
2020-04-16 05:31:59 +03:00
Gwenhael Goavec-Merou df226e16e9 Merge remote-tracking branch 'origin/ftdi_bitbang' 2020-03-12 07:26:06 +01:00
Martin Pittermann 49dc6c7b3e add ids of more FTDI adapters and lattice devices 2020-03-10 12:20:44 +01:00
Gwenhael Goavec-Merou 2a569958d8 typo in cable.hpp (goran-mahovlic) 2020-03-07 14:13:23 +01:00