OpenRAM/compiler/pgates/single_level_column_mux.py

# See LICENSE for licensing information.
#
# Copyright (c) 2016-2019 Regents of the University of California and The Board
# of Regents for the Oklahoma Agricultural and Mechanical College
# (acting for and on behalf of Oklahoma State University)
# All rights reserved.
#
import pgate
import debug
from tech import drc
from vector import vector
import contact
from globals import OPTS
from sram_factory import factory
import logical_effort

class single_level_column_mux(pgate.pgate):
    """
    This module implements the columnmux bitline cell used in the design.
    Creates a single columnmux cell with the given integer size relative
    to minimum size. Default is 8x. Per Samira and Hodges-Jackson book:
    Column-mux transistors driven by the decoder must be sized for optimal speed
    """
    def __init__(self, name, tx_size=8, bitcell_bl="bl", bitcell_br="br"):
        
        debug.info(2, "creating single column mux cell: {0}".format(name))

        self.tx_size = int(tx_size)
        self.bitcell_bl = bitcell_bl
        self.bitcell_br = bitcell_br
        
        pgate.pgate.__init__(self, name)

    def create_netlist(self):
        self.add_modules()
        self.add_pins()
        self.add_ptx()
        
    def create_layout(self):
        
        self.pin_height = 2*self.m2_width
        self.width = self.bitcell.width
        self.height = self.nmos_upper.uy() + self.pin_height
        self.connect_poly()
        self.add_bitline_pins()
        self.connect_bitlines()
        self.add_wells()

    def add_modules(self):
        self.bitcell = factory.create(module_type="bitcell")

        # Adds nmos_lower,nmos_upper to the module
        self.ptx_width = self.tx_size*drc("minwidth_tx")
        self.nmos = factory.create(module_type="ptx", width=self.ptx_width)
        self.add_mod(self.nmos)

        
        
    def add_pins(self):
        self.add_pin_list(["bl", "br", "bl_out", "br_out", "sel", "gnd"])

    def add_bitline_pins(self):
        """ Add the top and bottom pins to this cell """

        bl_pos = vector(self.bitcell.get_pin(self.bitcell_bl).lx(), 0)
        br_pos = vector(self.bitcell.get_pin(self.bitcell_br).lx(), 0)

        # bl and br
        self.add_layout_pin(text="bl",
                            layer="metal2",
                            offset=bl_pos + vector(0,self.height - self.pin_height),
                            height=self.pin_height)
        self.add_layout_pin(text="br",
                            layer="metal2",
                            offset=br_pos + vector(0,self.height - self.pin_height),
                            height=self.pin_height)
        
        # bl_out and br_out
        self.add_layout_pin(text="bl_out",
                            layer="metal2",
                            offset=bl_pos,
                            height=self.pin_height)
        self.add_layout_pin(text="br_out",
                            layer="metal2",
                            offset=br_pos,
                            height=self.pin_height)


    def add_ptx(self):
        """ Create the two pass gate NMOS transistors to switch the bitlines"""
        
        # Space it in the center
        nmos_lower_position = self.nmos.active_offset.scale(0,1) + vector(0.5*self.bitcell.width-0.5*self.nmos.active_width,0)
        self.nmos_lower=self.add_inst(name="mux_tx1",
                                 mod=self.nmos,
                                 offset=nmos_lower_position)
        self.connect_inst(["bl", "sel", "bl_out", "gnd"])

        # This aligns it directly above the other tx with gates abutting
        nmos_upper_position = nmos_lower_position + vector(0,self.nmos.active_height + self.poly_space)
        self.nmos_upper=self.add_inst(name="mux_tx2",
                                 mod=self.nmos,
                                 offset=nmos_upper_position)
        self.connect_inst(["br", "sel", "br_out", "gnd"])


    def connect_poly(self):
        """ Connect the poly gate of the two pass transistors """
        
        height=self.nmos_upper.get_pin("G").uy() - self.nmos_lower.get_pin("G").by()
        self.add_layout_pin(text="sel",
                            layer="poly",
                            offset=self.nmos_lower.get_pin("G").ll(),
                            height=height)


    def connect_bitlines(self):
        """ Connect the bitlines to the mux transistors """
        # These are on metal2
        bl_pin = self.get_pin("bl")
        br_pin = self.get_pin("br")
        bl_out_pin = self.get_pin("bl_out")
        br_out_pin = self.get_pin("br_out")

        # These are on metal1
        nmos_lower_s_pin = self.nmos_lower.get_pin("S")
        nmos_lower_d_pin = self.nmos_lower.get_pin("D")
        nmos_upper_s_pin = self.nmos_upper.get_pin("S")
        nmos_upper_d_pin = self.nmos_upper.get_pin("D")

        # Add vias to bl, br_out, nmos_upper/S, nmos_lower/D
        self.add_via_center(layers=("metal1","via1","metal2"),
                            offset=bl_pin.bc(),
                            directions=("V","V"))
        self.add_via_center(layers=("metal1","via1","metal2"),
                            offset=br_out_pin.uc(),
                            directions=("V","V"))
        self.add_via_center(layers=("metal1","via1","metal2"),
                            offset=nmos_upper_s_pin.center(),
                            directions=("V","V"))
        self.add_via_center(layers=("metal1","via1","metal2"),
                            offset=nmos_lower_d_pin.center(),
                            directions=("V","V"))
        
        
        # bl -> nmos_upper/D on metal1
        # bl_out -> nmos_upper/S on metal2
        self.add_path("metal1",[bl_pin.ll(), vector(nmos_upper_d_pin.cx(),bl_pin.by()), nmos_upper_d_pin.center()])
        # halfway up, move over
        mid1 = bl_out_pin.uc().scale(1,0.4)+nmos_upper_s_pin.bc().scale(0,0.4)
        mid2 = bl_out_pin.uc().scale(0,0.4)+nmos_upper_s_pin.bc().scale(1,0.4)        
        self.add_path("metal2",[bl_out_pin.uc(), mid1, mid2, nmos_upper_s_pin.bc()])
        
        # br -> nmos_lower/D on metal2
        # br_out -> nmos_lower/S on metal1
        self.add_path("metal1",[br_out_pin.uc(), vector(nmos_lower_s_pin.cx(),br_out_pin.uy()), nmos_lower_s_pin.center()])
        # halfway up, move over
        mid1 = br_pin.bc().scale(1,0.5)+nmos_lower_d_pin.uc().scale(0,0.5)
        mid2 = br_pin.bc().scale(0,0.5)+nmos_lower_d_pin.uc().scale(1,0.5)
        self.add_path("metal2",[br_pin.bc(), mid1, mid2, nmos_lower_d_pin.uc()])        
        

    def add_wells(self):
        """ 
        Add a well and implant over the whole cell. Also, add the
        pwell contact (if it exists) 
        """

        # Add it to the right, aligned in between the two tx
        active_pos = vector(self.bitcell.width,self.nmos_upper.by() - 0.5*self.poly_space)
        active_via = self.add_via_center(layers=("active", "contact", "metal1"),
                                         offset=active_pos,
                                         implant_type="p",
                                         well_type="p")


        # Add the M1->M2->M3 stack 
        self.add_via_center(layers=("metal1", "via1", "metal2"),
                            offset=active_pos)
        self.add_via_center(layers=("metal2", "via2", "metal3"),
                            offset=active_pos)
        self.add_layout_pin_rect_center(text="gnd",
                                        layer="metal3",
                                        offset=active_pos)

        # Add well enclosure over all the tx and contact
        self.add_rect(layer="pwell",
                      offset=vector(0,0),
                      width=self.bitcell.width,
                      height=self.height)
        
    def analytical_delay(self, corner, slew, load):
        """Returns relative delay that the column mux. Difficult to convert to LE model."""
        parasitic_delay = 1
        cin = 2*self.tx_size #This is not CMOS, so using this may be incorrect.
        return logical_effort.logical_effort('column_mux', self.tx_size, cin, load, parasitic_delay, False)