The only use for the clocker attribute and the AstVar::isUsedClock that
is actually necessary today for correctness is to mark top level inputs
of --lib-create blocks as being (or driving) a clock signal. Correctness
of --lib-create (and hence hierarchical blocks) actually used to depend
on having the right optimizations eliminate intermediate clocks (e.g.:
V3Gate), when the top level port was not used directly in a sensitivity
list, or marking top level signals manually via --clk or the clocker
attribute. However V3Sched::partition already needs to trace through the
logic to figure out what signals might drive a sensitivity list, so it
can very easily mark all top level inputs as such.
In this patch we remove the AstVar::attrClocker and AstVar::isUsedClock
attributes, and replace them with AstVar::isPrimaryClock, automatically
set by V3Sched::partition. This eliminates all need for manual
annotation so we are deprecating the --clk/--no-clk options and the
clocker/no_clocker attributes.
This also eliminates the opportunity for any further mis-optimization
similar to #6453.
Regarding the other uses of the removed AstVar attributes:
- As of 5.000, initial edges are triggered via a separate mechanism
applied in V3Sched, so the use in V3EmitCFunc.cpp is redundant
- Also as of 5.000, we can handle arbitrary sensitivity expressions, so
the restriction on eliminating clock signals in V3Gate is unnecessary
- Since the recent change when Dfg is applied after V3Scope, it does
perform the equivalent of GateClkDecomp, so we can delete that pass.
Large scale refactoring to simplify some of the more obtuse internals of
DFG. Remove multiple redundant internal APIs, simplify representation of
variables, fix potential unsoundness in circular decomposition. No
functional change intended.
Added cppcheck-suppressions.txt in the repo root. You can add new
patterns in there instead of having to parse the XML output.
Also configure to add the -D__GNUC__ preprocessor macro, which makes it
understand UASSERT (it understands the 'noreturn' function attribute).
Added some case by case specific suppressions and fixed up other code,
especially in V3Ast*h and V3Dfg*.h, including code generated by astgen
that had some no-ops that irks cppcheck.
One thing it does not seem to like is `const` class members with default
initializers in the class. It will assume that's always the value, even
if overridden in the constructor. We had few so removed them.
With that a lot of files in `src/` are now clean or only have a handful
of issues. Therefore, I have also deleted cppcheck_filtered, and made it
produce human readable output straight to the terminal.
Regarding cleaning up the reported nits, I kind of got bored after
V3[A-E] so pausing here. Apologies for the merge conflicts.
Tested with cppcheck 2.13.0
This patch adds DfgLogic, which is a vertex that represents a whole,
arbitrarily complex combinational AstAlways or AstAssignW in the
DfgGraph.
Implementing this requires computing the variables live at entry to the
AstAlways (variables read by the block), so there is a new
ControlFlowGraph data structure and a classical data-flow analysis based
live variable analysis to do that at the variable level (as opposed to
bit/element level).
The actual CFG construction and live variable analysis is best effort,
and might fail for currently unhandled constructs or data types. This
can be extended later.
V3DfgAstToDfg is changed to convert the Ast into an initial DfgGraph
containing only DfgLogic, DfgVertexSplice and DfgVertexVar vertices.
The DfgLogic are then subsequently synthesized into primitive operations
by the new V3DfgSynthesize pass, which is a combination of the old
V3DfgAstToDfg conversion and new code to handle AstAlways blocks with
complex flow control.
V3DfgSynthesize by default will synthesize roughly the same constructs
as V3DfgAstToDfg used to handle before, plus any logic that is part of a
combinational cycle within the DfgGraph. This enables breaking up these
cycles, for which there are extensions to V3DfgBreakCycles in this patch
as well. V3DfgSynthesize will then delete all non synthesized or non
synthesizable DfgLogic vertices and the rest of the Dfg pipeline is
identical, with minor changes to adjust for the changed representation.
Because with this change we can now eliminate many more UNOPTFLAT, DFG
has been disabled in all the tests that specifically target testing the
scheduling and reporting of circular combinational logic.
Rewrote V3LifePost to not depend on having AstAssignPre and
AstAssignPost types, but work with generic AstNodeAssign. There is an
extra flag in AstVarScope to denote it's part of an NBA and should be
considered.
Step towards #6280.
Remove AstJumpLabel
AstJumpGo now references one if its enclosing AstJumpBlocks, and
branches straight after the referenced block.
That is:
```
JumpBlock a {
...
JumpGo(a);
...
}
// <--- the JumpGo(a) goes here
```
This is sufficient for all use cases and makes control flow much easier to
reason about. As a result, V3Const can optimize a bit more aggressively.
Second half of, and fixes#6216
The manual for the BLKANDNBLK warning describes that it is safe to
disable that error if the updated ranges are non-overlapping. This
however was not true (see the added t_nba_mixed_update* tests).
In this patch we change V3Delayed to use a new ShadowVarMasked
scheme for variables that have mixed blocking and non-blocking
updates (or the FlagUnique scheme for unpacked variables), which
is in fact safe to use when the updated parts are non-overlapping.
Furthermore, mixed assignments are safe as far as scheduling is
concerned if either:
- They are to independent parts (bits/members/etc) (with this patch)
- Or if the blocking assignment is in clocked (or suspendable) logic.
The risk in scheduling is a race between the Post scheduled NBA
commit, and blocking assignments in combinational logic, which might
order incorrectly.
The second point highlights that we can handle stuff like this safely,
which is sometimes used in testbenches:
```systemverilog
always @(posedge clk) begin
if ($time == 0) a = 0;
end
always @(posedge clk) begin
if ($time > 0) a <= 2;
end
````
The only dangerous case is:
```systemverilog
always @(posedge clk) foo[idx] <= val;
assign foo[0] = bar;
```
Whit this patch, this will still resolve fine at run-time if 'idx' is
never zero, but might resolve incorrectly if 'idx' is zero.
With the above in mind, the BLKANDNBLK warning is now only issued if:
- We can't prove that the assignments are to non-overlapping bits
- And the blocking assignment is in combinational logic
These are the cases that genuinely require user attention to resolve.
With this patch, there are no more BLKANDNBLK warnings in the RTLMeter
designs.
Fixes#6122.
Somewhat commonly, there is code out there that compares an expression (or
variable) against many different constants, e.g. a one-hot decoder:
```systemverilog
assign oneHot = {x == 3, x == 2, x == 1, x == 0};
```
If the width of the expression is sufficiently large, this can blow up
a GCC pass and take an egregious amount of memory and time to compile.
Adding a new DFG pass that will generate a cheap one-hot decoder:
to compute:
```systemverilog
wire [$bits(x)-1:0] idx = <the expression being compared many times>
reg tab [1<<$bits(x)] = '{default: 0};
reg [$bits(x)-1:0] pre = '0;
always_comb begin
tab[pre] = 0;
tab[idx] = 1;
pre = idx ; // This assignment marked to avoid a false UNOPFTLAT
end
```
We then replace the comparisons `x == CONST` with `tab[CONST]`.
This is generally performance neutral, but avoids the compile time and memory
blowup with GCC (128GB+ -> 1GB in one example).
We do not apply this if the comparisons seem to be part of a `COMPARE ?
val : COND` conditional tree, which the C++ compilers can turn into jump
tables.
This enables all XiangShan configurations from RTLMeter to now build with GCC,
so in this patch we enabled those in the nightly runs.
Geza Lore
Ryszard Rozak
Wilson Snyder
Krzysztof Bieganski
Igor Zaworski
Krzysztof Sychla