Initial idea was to remodel AssignW as Assign under Alway. Trying that
uncovered some issues, the most difficult of them was that a delay
attached to a continuous assignment behaves differently from a delay
attached to a blocking assignment statement, so we need to keep the
knowledge of which flavour an assignment was until V3Timing.
So instead of removing AstAssignW, we always wrap it in an AstAlways,
with a special `keyword()` type. This makes it into a proper procedural
statement, which is almost equivalent to AstAssign, except for the case
when they contain a delay. We still gain the benefits of #6280 and can
simplify some code. Every AstNodeStmt should now be under an
AstNodeProcedure - which we should rename to AstProcess, or an
AstNodeFTask). As a result, V3Table can now handle AssignW for free.
Also uncovered and fixed a bug in handling intra-assignment delays if
a function is present on the RHS of an AssignW.
There is more work to be done towards #6280, and potentially simplifying
AssignW handing, but this is the minimal change required to tick it off
the TODO list for #6280.
These are no longer required for correct scheduling. They are still
accepted for backward compatibility, but have no effect on simulation
and are dropped in the front-end. Also removed the then redundant
AstAlwaysPublic class.
Fixes#6442
The manual for the BLKANDNBLK warning describes that it is safe to
disable that error if the updated ranges are non-overlapping. This
however was not true (see the added t_nba_mixed_update* tests).
In this patch we change V3Delayed to use a new ShadowVarMasked
scheme for variables that have mixed blocking and non-blocking
updates (or the FlagUnique scheme for unpacked variables), which
is in fact safe to use when the updated parts are non-overlapping.
Furthermore, mixed assignments are safe as far as scheduling is
concerned if either:
- They are to independent parts (bits/members/etc) (with this patch)
- Or if the blocking assignment is in clocked (or suspendable) logic.
The risk in scheduling is a race between the Post scheduled NBA
commit, and blocking assignments in combinational logic, which might
order incorrectly.
The second point highlights that we can handle stuff like this safely,
which is sometimes used in testbenches:
```systemverilog
always @(posedge clk) begin
if ($time == 0) a = 0;
end
always @(posedge clk) begin
if ($time > 0) a <= 2;
end
````
The only dangerous case is:
```systemverilog
always @(posedge clk) foo[idx] <= val;
assign foo[0] = bar;
```
Whit this patch, this will still resolve fine at run-time if 'idx' is
never zero, but might resolve incorrectly if 'idx' is zero.
With the above in mind, the BLKANDNBLK warning is now only issued if:
- We can't prove that the assignments are to non-overlapping bits
- And the blocking assignment is in combinational logic
These are the cases that genuinely require user attention to resolve.
With this patch, there are no more BLKANDNBLK warnings in the RTLMeter
designs.
Fixes#6122.
Used to set the wrong public flag on forceEn/forceVal, which means they
were not included in ICO as necessary, but V3Gate tended to inline them,
so this was hard to hit.
Fixes#4577
Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
- Rename `--dump-treei` option to `--dumpi-tree`, which itself is now a
special case of `--dumpi-<tag>` where tag can be a magic word, or a
filename
- Control dumping via static `dump*()` functions, analogous to `debug()`
- Make dumping independent of the value of `debug()` (so dumping always
works even without the debug flag)
- Add separate `--dumpi-graph` for dumping V3Graphs, which is again a
special case of `--dumpi-<tag>`
- Alias `--dump-<tag>` to `--dumpi-<tag> 3` as before
Introduce the @astgen directives parsed by astgen, currently used for
the generation child node (operand) accessors. Please see the updated
internal documentation for details.
Speed improvements:
- Use a direct, recursion-free implementation
- Improve pre-fetching
Functionality:
- Support remove/replace of currently iterated node
Using the 'forceable' directive in a configuration file, or the /*
verilator forceable */ metacomment on a variable declaration will
generate additional public signals that allow the specified signals to
be forced/released from the C++ code.
- Add more tests, including for tracing.
- Apply some cleaner, more generic abstractions in the implementation.
- Use clearer AstRelease which is not an assignment.
Geza Lore
Artur Bieniek
Wilson Snyder
Ryszard Rozak
Artur Bieniek
Bartłomiej Chmiel
Szymon Gizler
github action
Mariusz Glebocki
Krzysztof Bieganski
HungMingWu