b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
18100ec0f3
cable: new SEGGER J-Link support (PoC)
2022-03-12 18:46:23 +01:00
74eb812c6d
cable: digilent jtag-smt2-nc
2022-03-10 18:52:47 +01:00
fb2aadadad
cable: adding Olimex ARM-USB-OCD-H
2022-01-20 19:37:50 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
7d8c8b2dcb
Add Trion T120 BGA 576 Dev Kit support.
...
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
8f95303daf
move to APACHE-2.0 license
2021-06-26 15:24:07 +02:00
7fc0703167
cable: Add support for Orbtrace.
2021-06-22 23:59:46 +02:00
827767b99f
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
2021-06-20 10:26:05 +02:00
53c5d35da6
add cmsis dap (hid) support
2021-06-19 17:30:23 +02:00
dc003f6212
As per feedback, allow 232H devices to have upper bank pins configured on init.
2021-06-11 11:24:57 +01:00
291f1b6d6f
Add support for Digilent Digital Discovery and Analog Discovery 2 (openFPGALoader -c digilent_ad)
2021-06-10 22:38:17 +01:00
49ba5f265a
add support for usb-blasterII
2021-05-13 16:11:22 +02:00
4e2b1aa73e
cable: add SecuringHardware Tigard programmer
2021-03-27 18:43:56 +01:00
cd625d4c99
add efinix Xyloni support (spi mode only)
2021-01-21 07:11:10 +01:00
a11ec92a25
Fix gcc 10.2 error messages.
2020-12-12 15:48:45 -08:00
edad461d88
add support for artix-7 200t and nexys video board
2020-10-15 16:07:55 +02:00
c41911d039
introduce anlogic JTAG adapter (tested with sipeed lichee tang
2020-08-20 16:57:25 +02:00
4a3d1b3009
introduce intel usb blaster cable and de0nano board
2020-08-19 15:15:13 +02:00
27b0c8a664
introduce DirtyJTAG cable
2020-06-14 15:41:00 +02:00
eeefe48284
Add support for ECPIX-5
2020-05-12 19:09:30 +02:00
4558f8b395
Fixed ordering to be alphabetical
2020-04-16 10:54:53 +03:00
8a212e9feb
Fixed DangerousPrototype's Bus Blaster support (in JTAGkey mode).
...
The Bus Blaster uses an FT2232H with an on-board CPLD allowing it to
impersonate various JTAG probes.
This did not work until now because JTAGkey uses ADBUS4/GPIOL0 as ~CS
to enable the JTAG buffers on the on-board CPLD.
2020-04-16 05:31:59 +03:00
df226e16e9
Merge remote-tracking branch 'origin/ftdi_bitbang'
2020-03-12 07:26:06 +01:00
49dc6c7b3e
add ids of more FTDI adapters and lattice devices
2020-03-10 12:20:44 +01:00
2a569958d8
typo in cable.hpp (goran-mahovlic)
2020-03-07 14:13:23 +01:00
972f3f7f0d
add ft231x generic cable
2020-03-07 11:51:52 +01:00
84298839ea
rework board structure to add an optional pin mapping for bitbang mode
2020-03-07 11:00:29 +01:00
f9591b89a7
cable: introduce communication mode (currently only ftdi serial/bitbang
2020-03-07 10:53:31 +01:00
1ef72b0da6
add interface id in mpsse_bit_config.
2020-03-07 07:19:20 +01:00
a29cda11f3
add support for digilent hs3 cable
2020-02-01 17:57:20 +01:00
a86eff6b57
Update cmake according to trabucayre request https://github.com/trabucayre/openFPGALoader/pull/17
2020-01-27 09:47:42 +01:00
Stephan Ruloff
Gwenhael Goavec-Merou
Patrick Urban
Florent Kermarrec
Vegard Storheil Eriksen
ultraembedded
phdussud
Giuseppe Gebbia
Jean THOMAS
Udi Finkelstein
Martin Pittermann
Fabien Marteau