1bbe448f3a
Limit automatic read burst length to 64K
...
Reading of very large binaries (e.g. 32 MB) can cause stack overflow.
Put a reasonable limit on read burst length.
2022-10-16 15:44:33 +03:00
7185bbd127
Support for microchip SST26VF064B flash
2022-10-16 15:32:16 +03:00
228f71d9b5
src/libusb_ll: libusb wrapper (currently limited to scan device), src/main: add scan-usb option
2022-10-15 22:28:06 +02:00
2311f2c6ec
src/main: add busdev-num option to select a probe by his bus number / device address
2022-10-15 17:41:30 +02:00
68e519e4af
src/ftdipp_mpsse: _bus/_addr: change type to uint8_t, default value to 0 and use cable_t bus_addr/device_addr$
2022-10-15 17:18:38 +02:00
9e5fcdbe0d
src/cable: rename bus/device to bus_addr/device_addr
2022-10-15 16:19:24 +02:00
48126cf84c
src/xx: cable implementation: rework to use cable_t directly
2022-10-15 16:17:32 +02:00
3e20dc7082
src/cable: rework cable list. move vid/pid from mpsse_bit_config to cable_t
2022-10-15 16:15:23 +02:00
5a7e73b586
Add cable jetson-nano-gpio
2022-10-14 11:15:02 +02:00
2d66236533
xvc_client: allows to select port
2022-10-06 07:07:17 +02:00
b3e25bc650
Add support for xc7s_csga225 and the Digilent CMOD S7 board.
2022-09-30 22:27:20 +02:00
3c9792645e
add support for CmodA7-35T digilent fpga board
2022-09-30 21:17:45 +02:00
c3fcbaee07
removing test_sfl.svf
2022-09-30 13:59:39 +02:00
47f59d68ef
libgpiodJtagBitbang: fix warning
2022-09-17 17:33:58 +02:00
8f59294f45
src/main: add specific -D to enable/disable --device arg
2022-09-17 17:33:25 +02:00
fe259fb78d
gowin: add MSPI support when GW2A
2022-09-06 21:25:32 +02:00
d50b8102aa
ftdiJtagBitbang: fix int vs uint32_t
2022-09-04 14:16:56 +02:00
09b65ef4cc
gowin: better error message when mismatch between fs idcode and target's idcode
2022-09-04 14:16:02 +02:00
93aa9f4dd3
cable: add lpc-link2 support
2022-08-29 21:03:30 +02:00
27309d4931
cmsisDAP: allows to select interface number
2022-08-29 21:00:32 +02:00
61e959f93d
main,board,ftdiJtagBitbang: use pin ID instead of shift
2022-08-23 18:37:43 +02:00
5f7d4d2078
Add Xilinx Kintex UltraScale KCU035 IDCode
2022-08-18 15:25:09 +02:00
f115608cb1
Add Steppenprobe cable
...
https://github.com/diegoherranz/steppenprobe
Config taken from OpenOCD repo:
https://sourceforge.net/p/openocd/code/ci/master/tree/tcl/interface/ftdi/steppenprobe.cfg
2022-08-09 18:31:16 +02:00
6a00466137
xilinx: flow_program/xc95: verify write: replace hardcoded number of sections by nb_section
2022-08-04 08:15:29 +02:00
c6d79ec2e8
xilinx: flow_program/xc95: increase delay and use getClkFreq (issue #104 )
2022-08-04 08:08:01 +02:00
51628c38f5
typo
2022-07-26 20:29:11 +02:00
b4d343ce05
board: adding sipeed Tang Primer 20k
2022-07-26 20:25:43 +02:00
e77b8fb022
Merge pull request #243 from balika011/master
...
Gowin GW1NSR-4C MCU support
2022-07-25 19:09:01 +02:00
61aa0d4785
libgpiodJtagBitbang: update copyright + lint
2022-07-25 19:08:23 +02:00
421eefc605
MCU firmware isn't added to the checksum
2022-07-24 17:51:24 +02:00
e44af80776
use RawParser for gowin mcu flashing
2022-07-24 17:31:36 +02:00
c3d13e8b75
remove unneeded code
2022-07-24 17:30:59 +02:00
bb6d286736
Remove unnecessary null check
2022-07-22 10:14:53 +02:00
f69ce8a465
Only show libgpiod cable in list if enabled
2022-07-22 10:01:23 +02:00
4ed3ff835c
Clarify code by using different API function
...
Use gpiod_chip_open instead of gpiod_chip_open_by_name, and thus avoid
having to remove "/dev/" prefix.
2022-07-22 09:52:12 +02:00
e847c3a7b0
Add connecting MCU to JTAG support for GW1NSR-4C
2022-07-20 23:32:21 +02:00
0581803def
Add MCU Firmware flashing support for GW1NSR-4C
2022-07-20 23:32:16 +02:00
8d920d7ed0
Bugfix to allow NULL tx pointer
...
Also set the _clkHZ variable which is needed for timing operations
such as erase.
2022-07-18 18:09:34 +02:00
12955b8711
Initial commit of libgpiod JTAG driver
...
Not tested yet.
2022-07-18 18:09:34 +02:00
3e35944a4f
xvc_server: fix message size
2022-07-06 21:36:57 +02:00
975c40a00a
enable xvc only for Linux OS
2022-07-06 21:14:25 +02:00
a90a7b6fa5
main: enable xvc_server
2022-07-06 21:00:24 +02:00
34ff4f4020
xvc_server: first draft
2022-07-06 20:58:19 +02:00
e91ae5e65b
xvc_client: fix frequency convertion
2022-07-06 20:57:47 +02:00
de42f8b239
ftdiJtagMPSSE: add writeTMSTDI method with full tms & tdi buffer. Always return TDO buffer
2022-07-03 21:44:03 +02:00
f364ea2c8f
Merge pull request #239 from BBBSnowball/better-message-if-cmsisdap-disabled
...
cmsisDAP: better error message if support is not enabled
2022-07-02 22:30:18 +02:00
8c9a86699b
cmsisDAP: better error message if support is not enabled
2022-07-02 17:24:02 +02:00
80cf8edc31
cmsisDAP: fix crash in case hid device cannot be opened
2022-07-02 17:03:31 +02:00
2f30668dbc
ORBTrace Mini support (DFU mode)
2022-06-18 22:55:58 +02:00
702ca39300
stop using get_state and promote the use of get_status
2022-06-18 22:50:55 +02:00
de2cdcb67a
ftdispi: add missing index param
2022-06-18 20:21:13 +02:00
780ea66384
DFU: fix potential leak
2022-06-18 18:47:27 +02:00
e21a251af3
DFU: fix detect -> bypass bitstream
2022-06-18 18:39:58 +02:00
e278b87a64
Merge pull request #236 from Icenowy/gw2a
...
Add GW2A support
2022-06-16 07:06:41 +02:00
0779034921
Merge pull request #233 from Icenowy/ep4ce115
...
Add EP4CE115 support
2022-06-16 06:23:35 +02:00
3e00756976
part: add GW2A(R)-18(C)
...
Add JTAG ID code for GW2A(R)-18(C), tested with GW2A-18C on Sipeed Tang
Primer 20K.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:54:02 +08:00
fe0b4d347b
gowin: add support for GW2A
...
GW2A has no internal flash, and it uses a yet unknown checksum
algorithm.
Support it by forcing external flash and skip checksum check now.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 09:52:44 +08:00
37dbaba6b8
part: add EP4CE115
...
Altera EP4CE115 is a part from Cyclone IV E line.
Add it to the part database.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2022-06-16 08:52:32 +08:00
82c17f6a7d
dfu: display error code
2022-06-14 23:14:01 +02:00
4d69675041
dfu: check iProduct and iInterface -> set to a default string when empty
2022-06-14 23:09:43 +02:00
c64f1970d6
spiFlash: stop if jedec_id == 0xffffff
2022-06-02 08:52:56 +02:00
1f842e4ebc
cable: add missing mpsse_bit_config index
2022-06-02 08:51:47 +02:00
dec1a0920f
add means to set cable index from command line
2022-06-01 07:17:38 -07:00
610a495898
main: skip-reset fix typo
2022-05-28 18:06:51 +02:00
26ea58c305
main: always check if board is not null before access
2022-05-28 17:20:53 +02:00
051e2ecbfb
add option to bypass reset in SPI write mode. Adapt altera accordingly
2022-05-24 07:29:35 +02:00
e066c7f5b0
Merge pull request #222 from el-coder-sb/add-skip-sram-cmd
...
Add skip sram cmd
2022-05-24 07:16:24 +02:00
847a5040cf
add skip_load_bridge cmd-line parameter
2022-05-23 11:51:16 +02:00
056518e7c7
ihexParser: check buffer size, increase if required
2022-05-22 07:34:09 +02:00
e1eff76162
Merge pull request #228 from MPLew-is/zcu106
...
Correct part number for ZCU106 board
2022-05-16 08:52:28 +02:00
5295544200
Correct part number for ZCU106 board
2022-05-16 00:44:59 -06:00
c9fb3f4065
latticeBitParser: fix end header position with MACHOX3D .bit file
2022-05-14 19:00:21 +02:00
a4d5fd8448
lattice: MACHXO3D no exception when flash-sector is not provided in SRAM mode
2022-05-14 18:54:01 +02:00
ee3b6965f0
fix(part.hpp): use uint32_t instead of int for fpga_list index
...
This resulted in an error with GCC 12:
In file included from src/main.cpp:29:
src/part.hpp:148:1: error: narrowing conversion of ‘2165379139’ from ‘unsigned int’ to ‘int’ [-Wnarrowing]
148 | };
| ^
2022-05-14 15:36:02 +02:00
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
f83670996e
spiFlashdb: adding S25FL512S
2022-05-14 10:16:08 +02:00
74eda1cd8a
spiFlashdb: N25Q64 part
2022-05-10 19:07:56 +02:00
6a2a62cae6
support Kintex XC7K420T
2022-05-10 13:07:47 +07:00
2bbf372a1d
Merge pull request #218 from ejdan/efinix-jtag
...
efinix: support loading a bitstream to SRAM using only JTAG pins (no GPIO)
2022-05-02 07:05:37 +02:00
84d5c59dfe
ftdipp_mpsse: don't throw exception when iProduct is empty: display warn and use empty string
2022-05-01 17:09:53 +02:00
db410839af
spiInterface: unprotect_flash: fix return. Improve messages
2022-04-30 20:16:30 +02:00
e094494a59
efinix: support loading a bitstream to memory using only JTAG pins (no GPIO). Tested with Trion T120 BGA324 Development Kit but should work on T20BGA324, T20BGA400, T35, T55, T85, and T120 FPGA.
2022-04-29 15:57:20 +02:00
d7365495aa
spiFlash: fix display: when bp_len==0 -> set bp/tb = 0, otherwise parse reg
2022-04-23 17:58:33 +02:00
5692482152
jlink: write_data -> writeTMSTDI. Fix behaviour
2022-04-17 12:33:37 +02:00
b12d174131
part: add 5CEBA9 entry (issue #213 )
2022-04-11 19:14:58 +02:00
80eeaef6ab
ip CLI arg for XVC
2022-04-11 06:53:22 +02:00
188d7518d1
jlink: check usb_claim error
2022-04-11 06:51:34 +02:00
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
08c460135e
xilinx: fix wait until done for spartan3e
2022-04-02 11:53:46 +02:00
285cbde7f4
part: explictly add spartan3e and xc3s250e
2022-04-02 11:52:58 +02:00
7a8ed993f3
spiFlash: bulk_erase: check bp before erase
2022-03-31 06:36:37 +02:00
f615627b3c
Merge pull request #204 from rstephan/p_one_flash
...
Support for the Microchip SST25VF040B flash
2022-03-30 06:45:53 +02:00
648d8b9e3b
Removed `must_relock` part for the "SST25VF040B" as requested
2022-03-29 18:30:23 +02:00
7a5284212b
part: Add support for Kintex Ultrascale XCKU040
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:52 +02:00
6578bed6aa
part: Add support for ZynqMP Ultrascale Plus XCZU11EG
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:38 +02:00
f9eb32c778
spiFlash: handle case where TB is not configurable
2022-03-29 07:49:08 +02:00
b8fd59e770
ftdipp_mpsse: don't display error when attach kernel driver, when the device hasn't been detach before or when driver isn't loaded.
2022-03-28 18:53:36 +02:00
27f0ff2816
Merge pull request #205 from rstephan/spartan3e
...
Spartan3E (xc3s500evq100) and Papilio One
2022-03-28 18:37:43 +02:00
6da87c3d24
xc3s500e IDCODE: revision set to zero.
2022-03-28 18:14:25 +02:00
Petr Nechaev
Gwenhael Goavec-Merou
J Biemar
Bastian Löher
Hirosh Dabui
Maciej Nowak
Diego Herranz
balika011
Niklas Ekström
Benjamin Koch
Icenowy Zheng
Rengifo, Rodrigo
Simon Buhrow
Mike Lewis
Xiretza
Hans Baier
Anders Ejdeling
Patrick Urban
Stephan Ruloff
Sylvain Munaut