5114d6c2f4
Add an option to the iplot command: -d sets the number of simulation
...
steps before the window is shown. The value can be chosen to
limit rapid resizing when starting and that is used in the PLL examples.
2023-07-15 11:29:32 +02:00
a48cc44c7f
Example input file for 'iplot -w' option
2023-05-27 10:46:55 +02:00
af9f25e985
Various filter examples using Laplace expression x_fer
2023-01-20 15:07:37 +01:00
925dc55a73
rename example file
2022-12-11 15:28:23 +01:00
ca1974ff37
Examples moved to folder /various
2022-12-11 15:28:01 +01:00
751019b447
Examples for d_pwm and d_osc
2022-12-11 15:27:42 +01:00
ec6a902fb9
Fix a bug in simple diode, when ilimit is set, but not epsilon.
...
Make model more similar to LTSPICE
Add an example
2022-10-08 16:50:38 +02:00
cb42895dad
example for pwlts source code model
2022-10-07 13:39:33 +02:00
c8ed9590b7
Handle the case when control voltages on and off are equal.
...
Update the linear switch: add the limits to resistance ron, roff
Update the log switch: correct the resistance calculation for
von < voff
Add some examples for the pswitch.
2022-10-07 13:12:56 +02:00
2deefe1fbc
New tables for MOS devices
2022-10-07 13:11:18 +02:00
765d2e8a0e
Return data to input directory.
2022-10-07 13:10:51 +02:00
a69dd1bcde
Simplify the NMOS or PMOS selection by setting only one parameter
...
'mostype'
ngspice-37+ is required.
2022-10-07 13:10:06 +02:00
afde37c35d
add y-axis label
2022-02-01 12:21:08 +01:00
2981d0f56d
Use 'esave none' to reduce memory consumption.
...
Only analg nodes are to be saved.
2022-01-09 10:58:51 +01:00
738ac4863c
Obtain memory and simulation time
...
Add rusage information command
2022-01-03 22:11:15 +01:00
70e4d2157e
New names for the (experimental) ramp-time capacitor and inductor code models
2021-10-29 16:28:57 +02:00
05624bedd3
move examples file to prpoer xspice folder
2021-08-03 15:53:11 +02:00
6c3b14e396
make simulation faster, allow batch mode
2020-03-15 08:50:57 +01:00
9dec5f5f1e
An example for non-convergence of the pll if the stepszelimit is removed.
...
Adding a somewhat relaxed limit by TMAX in the tran command will speed
up the simulation by a factor of 1.5 without compromising the result.
2019-03-21 20:26:24 +01:00
f46135cc03
script to start GTKWave
2018-10-13 22:47:53 +02:00
bd5379d760
one tran analysis is sufficient
2018-09-14 20:34:27 +02:00
3138811acd
README for the table model and its table directory
2018-09-02 18:05:10 +02:00
925cb49ff2
Add some description, correct minor bugs.
2018-09-02 18:05:06 +02:00
800c9711f2
add a flag 'type of the union' to safely free model->param[i]->element,
...
if it contain a malloced string
2018-08-28 21:29:05 +02:00
f988dfad93
add plotting to the example
2018-08-27 12:20:30 +02:00
9becf1313a
complex model: a script loads two circuits with MOS and
...
bipolar table models, and run a sequence of dc simulations
with switching the circuit.
2018-08-18 11:28:13 +02:00
bb86b137a7
add 'reset' to fix a huge memory leak
2018-08-18 11:27:38 +02:00
e99985a156
add two commands 'reset' to avoid huge memory leak
2018-08-18 11:27:08 +02:00
b0883ffc5d
add the reset command to avoid huge memory leak
2018-08-18 11:26:55 +02:00
83db375fe8
add plotting with internal analog plot
...
and gtkwave for digital data
2018-08-10 19:55:52 +02:00
e8e5823955
add a hint to run the table generator before
...
simulation is possible
2018-08-10 19:41:02 +02:00
c8705147b0
Original examples fixed and moved to here
2018-07-28 13:45:41 +02:00
0de66ea3b8
XSPICE state machine example
2018-07-28 12:54:02 +02:00
a5e382d0ea
XSPICE d_source examples
2018-07-28 12:52:21 +02:00
6e452b1e7c
xspice filesource example
2018-07-28 11:45:33 +02:00
6ac19b03a3
examples/xspice/d_lut/mult4bit.spi, example for d_lut and d_genlut
2017-05-01 22:11:50 +02:00
30aa5ec0b7
examples/xspice/table, examples for the table2d and table3d code models
2017-04-30 17:01:07 +02:00
fb90bebcab
example for .options interp (reduces memory, speeds up plotting)
2014-02-01 14:31:38 +01:00
5ed51c2668
example input file as cited in manual
2012-10-21 11:50:23 +02:00
177964b4a6
XSPICE example: delta-sigma converter
2012-08-14 23:06:34 +02:00
5d0c3182d3
add BSIM3 model parameters for loop filer with transistor charge pump
2012-08-05 20:15:53 +02:00
96dd397251
correct the plot output
2012-08-05 12:06:11 +02:00
19a67fb7c5
pll: just include one of the two vco available
...
(avoid a bug which has been removed only recently)
2012-08-04 00:22:25 +02:00
a0db6f0ccd
update to XSPICE phase-locked loop example
2012-08-03 23:22:54 +02:00
6cd13e0475
pll-xspice-fstep.cir: pll with ref frequency steps
2012-07-31 18:05:10 +02:00
c31fc334f6
pll-xspice.cir: save command added
2012-07-31 17:31:28 +02:00
c0b5a78097
new XSPICE example: use trtol=1
...
less ripple, but longer simulation time
2012-07-30 00:01:56 +02:00
85ece25a3a
new XSPICE example: mixed mode pll circuit
2012-07-29 13:52:23 +02:00
926a7b338c
'filesource' test
2011-06-23 19:56:46 +00:00
b1f6da536a
whitespace cleanup, add missing trailing newlines
2010-09-07 19:04:20 +00:00
Giles Atkinson
Holger Vogt
dwarning
Tim Edwards
h_vogt
rlar