bbccb4b63e
Improved error message:
...
when argument out of range, name the term
2021-10-29 16:36:55 +02:00
c895ca33f7
Pswitch: Fix a bug in resistance calculation when cntl_on < cntl_off
...
Correct setting of parens
2021-10-29 16:35:47 +02:00
eee639d98d
Rename the capacitor and inductor code models to capacitoric and inductoric
...
8e4db9109
2021-10-29 16:28:25 +02:00
6b5bc9bcd8
There is no f (femto or Farad) in a resistor line
2021-10-05 18:07:32 +02:00
a87b237bff
is_a_modelname() to detect a model 1N4148, if compt LT is set.
...
Rewrite is_a_modelname(), when LT is set: only check element lines
beginning with r and c for RKM notation of a number.
So don't use a RKM number (e.g. 4k7) for naming a resistor model.
2021-10-05 18:01:53 +02:00
34c227815d
RKM for C: Revert reading f, it is again femto
...
Examples files include expected results
2021-09-29 20:31:53 +02:00
7f981569d9
Update to RKM if ngbehavior=lt is set:
...
Reading C and R values follow the RKM convention with 2 exceptions:
Upper case and lower case letters are not distinguished.
Letters m, M denote milli (1e-3), letters Meg or meg denote 1e6.
2021-09-29 20:31:44 +02:00
6f6f2b8996
Remove double assigment to s[1]
...
Assignment Is either done in the loop or by *y = '\0';
2021-09-29 20:31:22 +02:00
daa3609e58
Enable RKM notation for R and C, when ngbehavior LT is selected.
...
Add 2 evaluation functions specific for R and C respectively.
R has code letters L, R, K, M, G, T enabled. M here is Meg!
C has code letters p, n, u or µ, m, F. F here is unity, femto is
not available, m is still milli!
Two examples files show all cases.
2021-09-29 20:31:14 +02:00
df5e7e36f6
When checking for µ, truncated the line, when shifted.
...
Enable R470, when newcompat LT is selected.
2021-09-29 20:30:53 +02:00
3dcc36c1c3
ngspice input deck may contain special characters like µ (mu).
...
Detect mu for ANSI and UTF-8 and translate it to u.
2021-09-29 20:30:35 +02:00
4ce4f52938
XSPICE d_source: prevent a crash when the input file is not found
2021-09-29 20:30:10 +02:00
d4c559421e
prevent crash if info.node_table has not been defined,
...
caused by some preceding error.
2021-09-29 20:29:54 +02:00
93f904fb0b
Make 'speedcheck' also available in batch mode simulation.
2021-09-29 20:29:36 +02:00
5d116d1fb9
command listing: add option r (runable)
...
listing r > $inputdir/mycirc_runable.cir
will save the expanded netlist without line numbers,
ready to be sourced again and run in ngspice.
2021-09-29 20:29:26 +02:00
174f3d9cf9
Add missing rule for ngicon.rc
2021-09-29 20:29:13 +02:00
36313d59f3
Use the current point number as the single digit index for Cider 2D ascii save files. This conforms to the normal usage with other types of ascii rawfile. The numd parser table entry for ic.file now has the correct IF_STRING type.
2021-09-29 20:28:59 +02:00
3cf6857cfc
Fix bug #557
...
Revise memory allocation for different analysis types
2021-09-29 20:28:43 +02:00
601287e949
Check V and I lines for dc and ac.
...
Allow ac without parameters, a default is set to ac ( 1 0 )
2021-09-29 20:28:15 +02:00
81df6ed772
Retaining the mixed case of Cider quoted string valued parameters. Limit searches for ic.file to D*, M*, and Q* device instantiation lines. Cider model (numos, numd, nbjt) detection is limited to .model lines. Continuation lines which do contain these tokens are not checked, but this should rarely happen. All of the examples/cider circuits meet these assumptions. Memory errors have been removed.
2021-09-29 20:27:29 +02:00
3599c189b6
re-enable lower-casing of tokens beginning with 'cd',
...
except for command 'cd' which is usually followed by a space.
2021-09-29 20:27:05 +02:00
0266bd5894
make PTparse error message more verbose:
...
include point in a line where parsing failed.
2021-09-29 20:26:42 +02:00
abad190b38
Don't search for ic.file within comments.
2021-09-29 20:23:26 +02:00
b3a99f0c6c
Do not use non-portable strcasestr.
2021-09-29 20:23:08 +02:00
663a79dea8
Fix NAN error in numd2 area report and crashes when a doping file is missing. Update examples/cider so that the test circuits all run; add case sensitivity tests for rootfile and ic.file parameter strings enclosed in a single pair of double quotes.
2021-09-29 20:22:56 +02:00
68c5eb2d6b
Add resistance sweep error message for failing optran
2021-09-29 20:22:34 +02:00
8708b6651b
Optran may throw an error message while in temp sweep
...
and optran fails: message added (in addition prevent a crash)
2021-09-29 20:22:15 +02:00
1b3e192bfd
errno needs to be nulled in Linux.
...
Its previous value will be returned after checking.
2021-09-29 20:21:39 +02:00
e84c210876
'Option interp' and command 'stop' have been incompatible.
...
Allow both in a run.
Issue note (however not checked) that stop time data have to fit
the inpolated times.
2021-09-29 20:21:23 +02:00
e35e3e3b33
prevent a crash, e.g. when incompatible 'option interp'
...
is set and 'stop' is called.
2021-09-29 20:20:52 +02:00
a180eb60d5
command 'wrnodev'
...
Write current node voltages to file in format .ic=value
The file may be used to set initial conditions for another simulation,
e.g. ac at a specific time step of a transient simulation.
2021-09-29 20:20:27 +02:00
7f4fc2948b
Add a line feed to make message more readable.
2021-09-29 20:20:00 +02:00
fac1d3a79c
ASRC (B-Source) error message is cryptic, as it does not tell
...
which B-Source failed.
Add a hint to the ASRC error message on the name of the
B-Source instance.
2021-09-29 20:19:38 +02:00
18478380ad
Revise the SOA and add new parameters:
...
pd_max id_max idr_max te_max rth_ext derating
rth_ext is currently not used
2021-09-29 20:17:55 +02:00
3f322e1954
Add a check for sys/sysctrl.h, which has been declared deprecated,
...
and which may not be available (in the future) on some systems.
2021-09-29 20:17:23 +02:00
3b245ddd82
VDMOS, prepare SOA with new parameters
...
Model parameters pd_max, id_max, idr_max, and te_max
(power dissipated, drain current, drain reverse current, temperature)
2021-09-29 20:17:03 +02:00
4a1f7f950c
spinit: add optran to the standard inits
2021-09-29 20:16:09 +02:00
7c84e3f993
SOA for bipolar
...
Replace pow_max by pd_max
2021-09-29 20:15:41 +02:00
f06496c912
Enable command 'optran' in spinit or .spiceinit,
...
when the circuit is not yet loaded.
Then the optran data are stored in static variables,
until optran is called again with arg NULL from inp.c,
to set the data in ft_curckt->ci_defTask.
2021-09-29 20:15:13 +02:00
a225ce2aaf
List definition needs spaces between ( and next token,
...
and between token and )
Update to comment.
2021-09-29 20:14:45 +02:00
493cf73f7f
optran is only selected when the 'optran' command has been processed.
...
If not, the call to the OPtran() function returns the previous
'converged' value.
2021-09-29 20:12:52 +02:00
7f1fdd3934
Don't do optran, if command optran is not given.
2021-09-29 20:12:31 +02:00
711157e85d
Update comment: 0 is no initial iteration
2021-09-29 20:12:03 +02:00
f0cb886af1
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-09-29 20:11:45 +02:00
0e72287af7
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-09-29 20:11:13 +02:00
2ef3f66f96
if 'set ngdebug' print out transient initial conditions also with UIC set.
2021-09-29 20:10:25 +02:00
41ead284f3
make the error detection work properly
2021-09-29 20:10:02 +02:00
4e03efacb7
Use InpEvaluate() instead of strtod to enable ngspice numbers
...
with scale factors Meg k m u n p f etc.
2021-09-29 20:09:22 +02:00
3be5926f2c
Reverse stepsize and finaltime in optran command,
...
stepsize first as in tran command.
2021-09-29 20:08:51 +02:00
bca099ca29
prevent crash if first breakpoint is beyond optran max time
2021-09-29 20:08:28 +02:00
b07a54b8e1
test of supply ramping
2021-09-29 20:07:42 +02:00
7de526237e
upon finishing 'optran', restore old CKTstep
...
remove unused
2021-09-29 20:06:35 +02:00
0eafec254e
safeguard command 'optran' against circuit no being loaded
2021-09-29 20:05:56 +02:00
cf61e1e564
add missing header
2021-09-29 20:05:28 +02:00
83e223fafc
header for optran
2021-09-29 20:05:08 +02:00
a20afc54a5
When we sre ready, reset CKTmaxstep to its previous value
2021-09-29 20:04:26 +02:00
3956095484
set maxstepsize to stepsize
2021-09-29 20:04:08 +02:00
ecdb3b9eb4
set the task values, not the ckt values,
...
because task is called only afterwards when
the simulation command is given.
2021-09-29 20:03:31 +02:00
fd36eb552f
set stepsize
2021-09-29 20:02:11 +02:00
ab6224767b
Add command 'optran' to set 6 flags for transient op
2021-09-29 20:01:44 +02:00
df0792818f
Transient op calculation added to the standard operating point code.
...
When standard iteration, gmin stepping and source stepping fail,
try a transient simulation (like tran with uic option) to
determine the op. Implemented for AC and Tran simulation.
2021-09-29 20:00:29 +02:00
a08e6a0676
Add new SOA parameters (safe operating area) for BJT.
...
We now scan for max of Ic, Ib, power, taking into
account the max allowed temperature, using the thermal
resistance rth0 model parameter between juntion and ambient.
Two user options are there: If rth0 is given, we calculate
a derating of the max power allowed.
Without a constant max power according to model param pow_max
is assumed.
The new model parameters for the bipolar model are:
pow_max, ic_max, ib_max, te_max, and rth0, in addition
to the already existing vbe_max, vbc_max, adn vce_max.
2021-09-29 19:59:58 +02:00
1084b4205c
Allow global .temp in addition to instance parameter 'temp'.
...
Update to comments.
2021-09-29 19:59:28 +02:00
9221df234c
Patch to allow (and ignore) leading or trailing commas
...
when putting {} around tokens. Tested with PWL voltage source.
Patch has been suggested by Liqian Zhang
2021-09-29 19:58:36 +02:00
33571877dc
Some update to SOA for a diode:
...
Limit output to four digits
Add power and temperature limits.
Derating with self-heating, or with fixed temperature,
or no derating at all, selectable by setting model parameters.
Example file: SOA plotted as frame, with diode current.
2021-09-29 19:58:11 +02:00
759f4f5f84
Make the output a little more verbose:
...
add terminal voltage to Id, Te, and Pd outputs.
Compare SOA data to terminal voltage, not (unknown) junction voltage.
2021-09-29 19:57:54 +02:00
9c8380a031
Enhance the SOA (safe operating area) operations
...
Parameters id_max, pd_max and te_max have been added
for current, power, and temperature to the already existing
fv_max and bv_max (max forward and backward volteges).
2021-09-29 19:57:34 +02:00
e5fdb4c742
Patch sorts 1 byte vars in sequence,
...
to save some memory.
Patch #107 provided by Florian Ballenegger
2021-09-29 19:57:08 +02:00
2c2e21a80c
Smal typo fixup s/currntly/currently
2021-08-08 11:56:30 +02:00
605f59b417
Fix a bug with the alter statement
...
lower case for device name, when sent from shared ngspice
or from interactive mode.
2021-08-08 10:21:22 +02:00
9a2d968577
When transferring boolean data over the ABI, keep them as boolean types, not integer
...
Replace the type of all boolean variables around the ABI by NG_BOOL.
NG_BOOL is typedefed to _Bool, when compiling shared ngspice. When
sharedspice.h is use externally NG_BOOL is typdefed to bool
2021-08-03 15:57:58 +02:00
61b5c0563b
src/Makefile.am: Adopt used variables for lib versioning
...
A small adjustment so the configured ABI version from configure.ac will
get used for creating the libngspice library.
2021-08-03 15:56:02 +02:00
4258fe94b5
Add library versioning according to
...
https://www.gnu.org/software/libtool/manual/html_node/Libtool-versioning.html#Libtool-versioning
Add package versioning with m4 macros
2021-08-03 15:55:16 +02:00
6aac403ab0
XSPICE delay: add some more safeguards
2021-08-03 15:53:42 +02:00
4feb43e067
Prepare ngspice-35
2021-07-22 20:38:08 +02:00
4dbd8b7f9a
Preliminary fix for the 'interpolate' function.
...
Interpolation of 1D vectors is o.k. now,
multi-dimensional vectors are not (yet) supported.
2021-07-22 20:37:57 +02:00
1977128380
Prevent crash when CIDER diode models are used.
...
There is no third node in NUMD or NUMD2, so don't set
GENnode(fast)[i]. This patch fixes a bug introduced in
4895a4b5a
2021-07-20 14:24:43 +02:00
9cc9c56cad
Don't write past '\0', fixes a bug in commit
...
1c5e0d11d
2021-07-18 11:19:51 +02:00
b7473a33a0
Check for double '{', replace the inner '{', '}' by '(', ')'
...
in .subckt or .model (which both may stem from external sources)
2021-07-18 10:29:16 +02:00
85b07e35bf
Fixes bug 483
...
prevent crash when surface mobility (surfmob) has been
selected in 2D simulation.
The patch is provided by Brian Taylor (see
https://sourceforge.net/p/ngspice/mailman/ngspice-devel/thread/e6e921a3-677c-f513-7410-df8568c4bdad%40comcast.net/#msg37318450
)
2021-07-16 10:53:07 +02:00
1c5e0d11dd
If there is a XSPICE code model .model line
...
with file input, keep quotes and case for the file path.
2021-07-16 10:52:54 +02:00
15a3ed87c0
Enable the m parameter in E, G, B, R behavioral source/devices
2021-07-16 10:52:21 +02:00
973a60b898
re-enable making the old help system for Linux/Cygwin
...
by --enable-help --enable-oldapps
2021-07-08 15:34:41 +02:00
d34d1e7c7c
Get immediate response into text window,
...
when requesting information on coordinates.
2021-07-07 19:50:50 +02:00
182a4d3f5f
WinGUI: Push any remaining error message into text window
...
before emitting interactive error message window and exit.
2021-07-07 19:50:37 +02:00
ae72677cc2
Remove a false read when curr_line has
...
already been invalidated.
2021-07-05 19:43:25 +02:00
0f25c25c7e
Remove a memory leak
...
Make inp_rem_levels non-static
and use it to remove 'root' after it has been used.
2021-07-05 19:42:14 +02:00
54cbfb4138
Nodedamping: Make difference independent of the sign
...
of the difference
2021-07-05 14:32:57 +02:00
c74321e0f5
JFET2: Add a link to literature
2021-07-05 14:32:47 +02:00
93ddc7a3eb
Enhancement for E source with table, convert to B source with pwl:
...
Add G source
Allow 'table' also being part of a parameter name like 'table_something'
2021-07-05 14:32:34 +02:00
0ece04cdc8
Add channel type determination belong nmos/pmos model parameter
2021-07-05 14:32:14 +02:00
fe158341ba
Don't show message for every iteration
2021-07-05 14:31:47 +02:00
c38b8e3615
Fix a bug in the 'dc' progress report
2021-07-05 14:31:32 +02:00
8eeb924460
CIDER: Enable printing either binary or ascii data output to file.
...
Patch provided by Brian Taylor, see
(https://sourceforge.net/p/ngspice/mailman/message/37309841/ )
2021-07-05 14:31:21 +02:00
9bb401d9cd
Add a 'qsort' dummy according to current compiler standards.
...
Detected during the very rare condition of not finding a 'qsort'
during the ./configure step.
2021-07-05 14:31:08 +02:00
76eac5aa0f
Make error message more verbode
2021-07-05 14:30:35 +02:00
a4be66b9b0
Prevent crash if there is bad syntax in h, g, e, or f line
2021-07-05 14:30:26 +02:00
31fbf910af
Crash when trying to delete root and netlist:
...
Revert the order of deletion: Firstly the root, then the netlist.
2021-07-05 14:30:08 +02:00
858689d206
Make syntax check for nesting of .subckt ... .ends more verbose:
...
Try to find out where .subckt/.ends may be doubled, or missing.
2021-07-05 14:29:50 +02:00
52b5e218c7
Add '\f' to characters to be replace by '+'
...
during the syntax check of an netlist input file.
2021-07-05 14:29:35 +02:00
c061747f19
Add evaluating and using temp and dtemp
...
as ASRC instance parameters.
2021-07-05 14:29:10 +02:00
ddcc6f6097
add a comment: we should use TNOM, but not a fixed 300.15.
...
TNOM still has to be added to the ASRC parameters.
2021-07-05 14:28:51 +02:00
dcde7b590e
Don't put brackets around dtemp and temp, when they denote
...
instance parameters and thus are on the left hand side of '='
2021-07-05 14:28:39 +02:00
945786fba7
Make PTcheck more verbose:
...
Send error message containing failed expression
2021-07-05 14:28:19 +02:00
7e01b800f0
add the parameter name to error message of missing or bad parameter
2021-07-05 14:28:07 +02:00
7eb791fe00
No parse tree submitted to IFeval:
...
Prevent segfault and emit error message
2021-07-05 14:27:46 +02:00
19abc83312
Make the choice of last commit mor obvious
2021-07-05 14:27:23 +02:00
87a9d87f7d
Replace identifier by func not only after '=', but also '{'
...
Extension to commit
61e48f984
2021-07-05 14:26:57 +02:00
68e51848a4
logic condition to check only 'x' lines had not been given
2021-07-05 14:26:46 +02:00
d0ca6a4773
Start replacing identifiers by func only after the first '='
2021-07-05 14:26:21 +02:00
36069467fb
Clarify that 'scale set to ...'
...
is not a query, but a statement
by 'scale is set to ...'..
2021-07-05 14:25:49 +02:00
5d1dfdf34e
Fix a comment
2021-07-05 14:25:26 +02:00
06136d2d02
Set the default line width for grid and graph to 1.
...
0 is possible but seems to be too thin for reasonable plots.
2021-07-05 14:25:13 +02:00
028dd0ab88
Remove unused
...
Add a delay of half a time step to reduce error
2021-07-05 14:24:46 +02:00
abc6eb56f3
Plausibility checking
...
Enforce out=in when delay == 0
2021-07-05 14:24:29 +02:00
fbab9a0fe2
Add an analog delay source for transient simulation
...
Internal circular memory of size tstop/tstep or user defined.
(aprox.) every tstep a value is stored.
Delay time in multiples of tstep, by control voltage or user defined.
Dc or ac sim will simply connect input to output.
2021-07-05 14:24:06 +02:00
0d2d034eb2
Add devices s and w to previous commit.
...
R and C are not yet covered here, due to the many
varieties available.
2021-07-05 14:23:52 +02:00
c033298db9
Don't replace a device model name by a parameter, if both
...
have the same names.
This is an extension to commit
7706889a0https://github.com/google/skywater-pdk/issues/327
2021-07-05 14:23:23 +02:00
03517ae86c
Define the function DevFinalize as used in the previous commit.
2021-07-05 14:22:55 +02:00
5e8ae680db
Don't do gr_redraw twice (for non-X11 is already
...
done in gr_resize)
Add a function DevFinalize() to add the closings in SVG or PS
files ("/> or "stroke"), when files are generated by the
plot window in MS Windows.
2021-07-05 14:22:33 +02:00
a6079781ea
Fix previous commit, enable name upgrade for Linux and other non-Win OSs
2021-07-05 14:22:10 +02:00
1176bdb0b0
Bug: Plot window switching did not change the plot content.
...
Enable plotting the current graph to svg or ps by selecting
the graph from the current plot window.
2021-07-05 14:21:47 +02:00
604c4624d1
Within a single run, allow multiple plots with different names:
...
Add an increasing number to the id file name.
2021-07-05 14:21:16 +02:00
0f4d953950
Open mrdump file not in append, but in write mode
2021-07-05 14:20:55 +02:00
273b773280
New pswitch is not compatible to iswitch
...
Keep the old aswitch until a modified pswitch is available.
2021-07-05 14:20:31 +02:00
93f6a50553
New author
2021-07-05 14:20:14 +02:00
22a516bc4d
New author
2021-07-05 14:19:56 +02:00
d36fcaf34c
Neew pswitch with patch 0001-pswitch-fix.patch from Jube 3rd, 21 at
...
https://sourceforge.net/p/ngspice/discussion/127605/thread/d55d2322f2/#c966/b802/4764/2540/3b3f/04a4/bc51/3a68
Input resistance, numerically computed derivatives with auto-partial, reasonable limits.
2021-07-05 14:19:43 +02:00
5cc5e351f1
prepare for the new pswitch with g, gd input
2021-07-05 14:19:28 +02:00
9abb61d6ac
Bug fix for %i(node1) in an A instance.
...
Don't do i() replacement in an A instance as shown above.
2021-07-05 14:19:12 +02:00
e0d5d98b33
Just a reminder that truncation is currently diabled for CSW
2021-07-05 14:18:40 +02:00
c46676d06e
If compatmode PS is set, translate vswitch and iswitch to pswitch.
...
This reverts commit 025a9fe59
2021-07-05 14:18:30 +02:00
f12592871a
Set derivative d out/d contrl to 0 if outside of switching range.
...
Disable auto derivatives.
Enable algorithmic derivatives.
2021-07-05 14:18:08 +02:00
db5395032f
Avoid model warning for C if compat flag lt is set.
2021-07-05 14:17:49 +02:00
1266225cdb
For C and R device enable value tokens like 4k7 or 1u2
...
in addition to 4.7k and 1.2u.
Valid for
R1 1 0 47k
C2 3 6 1u2
only. Does not interfere with other value tokens in params etc.
2021-07-05 14:17:31 +02:00
14402ffc96
Update to
...
6034c2bcd
2021-07-05 14:17:01 +02:00
6d9876229c
Fixes bug #331
...
Bug detected and analysed by Arsen Liash
Patch provided by Yurii Demchyna
2021-07-05 14:16:35 +02:00
c75e4129f4
Plug another memory leak in LTRA transmission line
2021-07-05 14:16:17 +02:00
5d39ff2d8c
Plug memory leaks in transmission line LTRA
2021-07-05 14:15:20 +02:00
d2ac525f52
Plug some more memory leak in TXL transmission line.
2021-07-05 14:14:38 +02:00
74ba5c1f96
found non-initialized value!
2021-07-05 14:14:15 +02:00
5c71349bad
remove dead assign statements, yet just commented them out for the time
...
being
2021-07-05 14:14:00 +02:00
c0bd7ca6e2
Plug a memory leak in TXL transmissiom line (y device)
2021-07-05 14:13:44 +02:00
b5054cc9f1
Plug a memory leak
...
Add function HICUMdelete() to remove model->HICUMversion
2021-07-05 14:12:46 +02:00
7dd96c241c
PSPICE MC parameters are not (yet) supported, so remove them
...
from .model (lot, dev) and netlist (.distribution)
Triggered by Patch #104 by Giles Atkinson
2021-07-05 14:12:09 +02:00
58bdf9e0e6
Remove 'goto end' and 'end:' statements.
2021-07-05 14:11:48 +02:00
c2d11728c4
enable usage of parameters in .options lines.
2021-07-05 14:11:26 +02:00
78eee72b36
.temp could not apply params like
...
.ttemp {tmpparam}:
move evaluation of .temp to a later stage
2021-07-05 14:11:03 +02:00
d0da4bebd3
make variable 'dir' local
2021-07-05 14:10:44 +02:00
11d3188e19
fix typo
2021-07-05 14:10:20 +02:00
4fd7de9e34
Partially re-introduce and improve code that has been
...
inadvertently deleted in commit
83592c456
2021-07-05 14:09:56 +02:00
6bafdf70d5
sub-coll junction calculation only if ISS given
2021-07-05 14:09:35 +02:00
3a908c76ef
Prevent crash, refName may be NULL
2021-07-05 14:08:41 +02:00
98f8a4fcb2
Improve error message, if occuring during op
2021-07-05 14:08:25 +02:00
4ca4b43801
simplify while loop for subckt diode and bjt models
2021-07-05 14:08:02 +02:00
c8db059144
Use 'm' and 'multi' correctly in PDKs
...
If there is alraedy m=xx in a subcircuit instance line,
replace it by m='m*xx' to aknowledge the additional m.
Tested with an (old) TSMC PDK and with Skywater PDK.
2021-07-05 14:07:46 +02:00
1f95e12142
Value stored to vsub is never read
2021-07-05 14:07:26 +02:00
52f4244345
fix Vcrit calculation for coll-subs junction and correct tlev=3 temperature model
2021-07-05 14:07:14 +02:00
b00fa921ac
rm depreciated storage class
2021-07-05 14:06:52 +02:00
e14dc3aaa3
few style cleanings
2021-07-05 14:06:28 +02:00
109e33f127
Improve font selection for Win GUI plot window
...
Font Names from
https://docs.microsoft.com/en-us/typography/fonts/windows_10_font_list
without option or with Bold or Italic are supported, e.g.
setcs wfont="Cambria Bold Italic".
2021-07-05 14:06:06 +02:00
80e5f67466
Reduce wchar_t string length to minimum required
...
(to be NULL-terminated for CreateWindowW)
2021-07-05 14:05:33 +02:00
c9a19c7569
Fix for bug 547
...
Reduce length of wchar_t strings to the minimum required
for conversion
Check if Bold or Italic is given in the font name, set
corresponding variable
2021-07-05 14:04:09 +02:00
45e397727b
rm dead assignments
2021-07-05 14:03:38 +02:00
d2f6ad239f
If the input file path contains ANSI-encoded special characters,
...
utf-8 conversion and thus file opening will fail.
This patch then in addition tries opening the file with standard fopen.
2021-07-05 14:03:21 +02:00
ba262eaa5f
Internal global variable Infile_Path is a file search path made
...
available for the code models. It is set when command 'source' is used.
This patch makes the first entry in var 'sourcepath' available to
the code models as well by setting Infile_Path, when 'sourcepath'
is set in .spiceinit.
2021-07-05 14:02:51 +02:00
a08f120518
TEMPFORMAT has already leading / in defines.h
2021-07-05 14:02:21 +02:00
64c407332d
rm dead assignemnts
2021-07-05 14:02:04 +02:00
9b2f3cfd5e
iter value never read - prevent compiler warning
2021-07-05 14:01:26 +02:00
4e86cfa352
diode cbv only needed for tracing - prevent compiler warning
2021-07-05 14:01:09 +02:00
2b2e40793e
correct indentation
2021-07-05 14:00:44 +02:00
741cab390f
Prevent a crash when the number of models exceeds MODNUMBERS
...
Raise MODNUMBERS to 2048
https://github.com/kicad-spice-library/KiCad-Spice-Library/issues/16
2021-07-05 13:59:53 +02:00
66cbac3f4e
Fixes a bug introduced by commit [4895a4]
...
Re-enables R with .model like
.model R_NOISELESS RES (TCE=0 T_ABS=-273.15)
R77 1 0 R_NOISELESS 100
2021-07-05 13:59:24 +02:00
b1bf7ea0ad
Diode model with selfheating option
2021-07-05 13:58:51 +02:00
48acb10929
Remove compiler warnings
2021-07-02 11:58:30 +02:00
e91ec306ba
Remove some compiler warnings
2021-07-02 11:58:10 +02:00
2536b78acb
Allow tailing '\0'
...
Remove potentially user induced buffer overflow by replacing
sprintf by snprintf.
2021-07-02 11:57:30 +02:00
053e8c5a04
remove compiler warning
2021-07-02 11:56:29 +02:00
d5fd9c8625
correct function prototype
2021-07-02 11:56:14 +02:00
45c171635a
Remove compile error which may occur with specific settings
2021-07-02 11:55:28 +02:00
19ddeb8fe6
formatting (not complete)
2021-07-02 11:54:59 +02:00
545d2f9177
Report an error when trying to define ports
...
'v', 'vd', 'i', and 'id' as 'inout'
Parch 105 provided by Giles Atkinson
2021-07-02 11:54:34 +02:00
bc74caca2f
Don't create cat2strings if on VS2019
2021-07-02 11:54:06 +02:00
d19c8e7f41
Efficiency: Remove setting the random seed to behind the options selection
...
Evaluate '.options cshunt=xx' earlier to allow the following:
Set the option by calling INPpas4() during parsing the circuit,
before .ic is set.
Ckt and Task cshunt are still set, but their values are available
only too late for INPpas4(), but may be used by command 'option'
(w/o parameters) for assessing the options and their values.
2021-07-02 11:53:42 +02:00
911b50fa8f
Adding capacitors, one per voltage node
2021-07-02 11:52:45 +02:00
f8357dad88
Prepare Cshunt: add a cpacitor to each voltage node
...
Function inppas4() will add the extra caps, to be done.
2021-07-02 11:52:15 +02:00
db5c6cd0ec
Add some comments for inppas1,2,3
2021-07-02 11:51:57 +02:00
d07fab904c
Speed enhancement while reading large PDKs:
...
Line concatenation used tprintf, which uses vsnprintf,
which is very inefficient in Linux, MINGW, but efficient
using MSVC. Thus for the others a function cat2strings() is
introduced, which uses memccpy().
2021-07-02 11:51:18 +02:00
e2cf397b6d
Restrict the limit for exp function (linear growth when exponent
...
is larger than 14, commit [93a76d]) to the PSPICE compatibility
mode.
2021-07-02 11:50:42 +02:00
8da2f3c16d
unify the evaluation of '.options scale=xx'
...
.option in a netlist will override 'options'
from spinit, .spiceinit or a script
'.options scalm=xx' yields a warning, it is not supported.
2021-07-02 11:50:17 +02:00
8a04d049ab
Correct scaling for area and pj geometry scaled diode (level=3)
2021-07-02 11:49:35 +02:00
a7cf70e615
Introduce element parameter handling for geometry scaled diode (level=3)
2021-07-02 11:49:21 +02:00
56c8a24dd7
Correct parameter handling for geometry scaled diode (level=3)
2021-07-02 11:48:53 +02:00
2a55f50192
First attempt for geometry scaled diode (level=3)
2021-07-02 11:48:04 +02:00
4bee26b8b9
Remove unused prototype
2021-07-02 11:45:11 +02:00
7064df7f3b
Define a preprocessor flag HAS_NG_BOOL
2021-05-05 21:59:25 +02:00
f6ba097b9c
Replace BOOL by NG_BOOL
...
Avoid clashes in environments where BOOL my be used differently.
NG_BOOL is typedefed to int, as ngspice uses int for boolean variables.
2021-05-05 10:52:13 +02:00
ded0f79c01
Avoid type 'bool', as ist is a built-in type in C++, not
...
equaling 'int' which ngspice is using.
Change bool to BOOL and ad a
typedef int BOOL;
2021-03-28 18:20:47 +02:00
5abd8057e6
remove deprecated storage class
2021-03-28 13:30:39 +02:00
9311674499
re-enable PostScript/SVG to file by pushbutton
...
on the ngspice plot window, avoid crash due to double freeing.
2021-03-19 15:07:33 +01:00
Holger Vogt
Keno Fischer
Brian Taylor
Carsten Schoenert
dwarning
Markus Mueller