c09839b209
Enable math characters in vector (node) names for commands
...
write and print
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:37 +01:00
57f6d41e69
Enable math characters in vector (node) names for plotting
...
Replace ft_getpnames() by ft_getpnames_quotes().
2021-12-13 21:41:28 +01:00
e93a19e3e8
Allow math characters in node names
...
Add a function ft_getpnames_quotes()
It puts quotes " around tokens xxx, when these are enclosed as
V(xxx) and contain arithmetic characters. V(R*C) becomes
V("R*C"). After settig up the parse tree, the quotes are removed again.
Thus these math character remain part of the node name and are not
parsed as parts of an equation.
2021-12-13 21:41:16 +01:00
d5dc757288
correct assignment of a variable value to a 1-bit-field
...
only by a logic comparison.
2021-12-13 21:40:57 +01:00
90377dcff9
struct TSKtask: group all single bit fields together
2021-12-13 21:40:38 +01:00
26979079d4
prevent few compiler warnings
2021-12-13 21:40:15 +01:00
3f3936c728
Remove memory leaks
2021-12-13 21:34:07 +01:00
89eaf7739c
Remove unused variables
2021-12-13 21:33:09 +01:00
a420f58ef5
Plug a (potential) memory leak
...
Add missing memsaved
2021-12-13 21:32:46 +01:00
6b41ad433a
Remove memory leak
...
Free some tokens generated by CNVget_token
Initialize reset and clk
Still missing: free 'states'
2021-12-13 21:32:15 +01:00
36fa47a8a0
Remove memory leak
...
Add callback function free_local_data
Free some tokens generated by CNVget_token
2021-12-13 21:31:49 +01:00
8f9bf94a38
Aware of sscanf return value
2021-12-13 21:30:55 +01:00
ba6d8c871c
white spaces
2021-12-13 21:30:32 +01:00
ba9f5be52c
Prevent arithmetic overflow and reduce operations
2021-12-13 21:29:37 +01:00
38848259e4
With the ngspice gnuplot command, enable x/y contour plots for 2d Cider save file data. Usage: gnuplot <file> xycontour <expr>. xycontour is a new flag which is ignored if the plot data is not from 2d Cider. For contours, only a single plotarg <expr> is allowed. With <expr1> vs <expr2>, only <expr1> is plotted and <expr2> is ignored.
2021-10-30 13:21:32 +02:00
550e9f1a81
correct some scaling rules
2021-10-30 11:03:26 +02:00
f638a63fba
save few calculation effort in diode load routine
2021-10-30 11:03:05 +02:00
62242a5538
save few calculation effort in bjt load routine
2021-10-30 11:02:54 +02:00
133f9c46e7
prevent unwanted fallthrough
2021-10-30 11:02:25 +02:00
ae49043fe3
correct scaling for IBC parameter
2021-10-30 11:02:13 +02:00
b15c7d29f1
correct temp update for IBE and IBC parameter
2021-10-30 11:01:51 +02:00
01fb0ac18b
introduce IBE and IBC model parameter for more accurate current calculation
2021-10-30 11:01:36 +02:00
231e6218a5
remove comment regarding ancient leakage current defaults
2021-10-30 11:01:24 +02:00
5ff04ee85b
c2 and c4 are now aliases for B-E and B-C leakage saturation currents
2021-10-30 11:01:09 +02:00
fb98f7873b
remove some compiler warnings
2021-10-30 10:46:39 +02:00
f3cb69403a
bug 497: Prevent a crash in CPL
...
Forbiddeb combination of model parameters.
Details are not yet available.
2021-10-30 10:44:44 +02:00
69e2903bf6
Update to Garbage Collector for cpl
...
Update some comments
Insert the deleting functions
Reset pool_vi and ndn_btree
Add an example with 20 call to cpl in sequence
2021-10-30 10:44:29 +02:00
041264df03
No more meory leaks with existing cpl examples:
...
Add cpldelete.c and cplmdel.c
Delete the model parameters.
Add 2 missing memsaved().
2021-10-30 10:44:07 +02:00
9ede9b80e0
Issue a warnong only when ngdebug is set.
2021-10-30 10:43:38 +02:00
d2dd1950cb
Add memsaved() to TMALLOC, calloc and replace CPLTFREE for tfree
2021-10-30 10:43:10 +02:00
de00317e49
Add memsaved or memdelete to macros
2021-10-30 10:42:37 +02:00
8c5277a5e8
Re-format cplsetup.c
2021-10-30 10:42:09 +02:00
7dcb1b2a39
Add memsaved() to TMALLOC
2021-10-30 10:41:51 +02:00
1dddd6df8d
Each TMALLOC is accompanied by fcn memsaved().
2021-10-30 10:41:37 +02:00
b142f2eb9d
Add mem_init() and mem_delete() to setup and unsetup functions
2021-10-30 10:41:24 +02:00
3be7370fa8
Add header with extern function prototypes
2021-10-30 10:40:40 +02:00
677ec1a094
Update intro text
2021-10-30 10:40:04 +02:00
7c38699cd7
Add missing function nghash_delete_special(),
...
developed for branch gc-local
2021-10-30 10:39:19 +02:00
b9afd2bd16
add missing headers
2021-10-30 10:38:23 +02:00
2f5a00f0a5
hash functions for cpl garbage collector
2021-10-30 10:37:42 +02:00
063665c374
Fix a bug in optran code:
...
devname will be used in the list of instances
2021-10-29 16:41:18 +02:00
01ed224896
A check to avoid multiple entries for the same node into the .save list
...
Scan the data base dbs (list of saves) before a new entry is generated.
2021-10-29 16:40:51 +02:00
bde0639bc4
save within subcircuit
...
enable V(a,b) as v(a) v(b)
2021-10-29 16:40:34 +02:00
e90b3e711b
F.-request 85: save currents in subcircuits
...
Separate handling .ic/.nodeset and .save .
Add i(Vxx) to address translation.
Vxx#branch is not supported.
2021-10-29 16:40:23 +02:00
bd0113ea9a
Feature request 85: Enable .save within subcircuits
...
inp.c: Add .save to wl_first only after subcircuit expansion
subckt.c: treat .save like .ic
2021-10-29 16:40:06 +02:00
f9b743aa2a
remove compiler warnings
2021-10-29 16:39:28 +02:00
7ce476c0ad
Make optran standrad by calling com_optran during ngspice initialization.
2021-10-29 16:38:27 +02:00
36dd77f63e
if step size in optran command is set to 0,
...
optran is deselected.
2021-10-29 16:38:08 +02:00
1eb15de584
remove optran command from spinit
2021-10-29 16:37:56 +02:00
d6038ea43c
Redo the transformation vswitch -> pswitch
...
Parsing takes default values into account, when
parameter is missing.
S vswitch --> pswitch code model
S_ST vswitch (with hysreresis) --> SW switch
S iswitch --> aswitch code model
S_ST iswitch (with hysreresis) --> CSW switch
Use string handling for replacements: allow parameter
equations in .model lines.
2021-10-29 16:37:19 +02:00
bbccb4b63e
Improved error message:
...
when argument out of range, name the term
2021-10-29 16:36:55 +02:00
c895ca33f7
Pswitch: Fix a bug in resistance calculation when cntl_on < cntl_off
...
Correct setting of parens
2021-10-29 16:35:47 +02:00
eee639d98d
Rename the capacitor and inductor code models to capacitoric and inductoric
...
8e4db9109
2021-10-29 16:28:25 +02:00
6b5bc9bcd8
There is no f (femto or Farad) in a resistor line
2021-10-05 18:07:32 +02:00
a87b237bff
is_a_modelname() to detect a model 1N4148, if compt LT is set.
...
Rewrite is_a_modelname(), when LT is set: only check element lines
beginning with r and c for RKM notation of a number.
So don't use a RKM number (e.g. 4k7) for naming a resistor model.
2021-10-05 18:01:53 +02:00
34c227815d
RKM for C: Revert reading f, it is again femto
...
Examples files include expected results
2021-09-29 20:31:53 +02:00
7f981569d9
Update to RKM if ngbehavior=lt is set:
...
Reading C and R values follow the RKM convention with 2 exceptions:
Upper case and lower case letters are not distinguished.
Letters m, M denote milli (1e-3), letters Meg or meg denote 1e6.
2021-09-29 20:31:44 +02:00
6f6f2b8996
Remove double assigment to s[1]
...
Assignment Is either done in the loop or by *y = '\0';
2021-09-29 20:31:22 +02:00
daa3609e58
Enable RKM notation for R and C, when ngbehavior LT is selected.
...
Add 2 evaluation functions specific for R and C respectively.
R has code letters L, R, K, M, G, T enabled. M here is Meg!
C has code letters p, n, u or µ, m, F. F here is unity, femto is
not available, m is still milli!
Two examples files show all cases.
2021-09-29 20:31:14 +02:00
df5e7e36f6
When checking for µ, truncated the line, when shifted.
...
Enable R470, when newcompat LT is selected.
2021-09-29 20:30:53 +02:00
3dcc36c1c3
ngspice input deck may contain special characters like µ (mu).
...
Detect mu for ANSI and UTF-8 and translate it to u.
2021-09-29 20:30:35 +02:00
4ce4f52938
XSPICE d_source: prevent a crash when the input file is not found
2021-09-29 20:30:10 +02:00
d4c559421e
prevent crash if info.node_table has not been defined,
...
caused by some preceding error.
2021-09-29 20:29:54 +02:00
93f904fb0b
Make 'speedcheck' also available in batch mode simulation.
2021-09-29 20:29:36 +02:00
5d116d1fb9
command listing: add option r (runable)
...
listing r > $inputdir/mycirc_runable.cir
will save the expanded netlist without line numbers,
ready to be sourced again and run in ngspice.
2021-09-29 20:29:26 +02:00
174f3d9cf9
Add missing rule for ngicon.rc
2021-09-29 20:29:13 +02:00
36313d59f3
Use the current point number as the single digit index for Cider 2D ascii save files. This conforms to the normal usage with other types of ascii rawfile. The numd parser table entry for ic.file now has the correct IF_STRING type.
2021-09-29 20:28:59 +02:00
3cf6857cfc
Fix bug #557
...
Revise memory allocation for different analysis types
2021-09-29 20:28:43 +02:00
601287e949
Check V and I lines for dc and ac.
...
Allow ac without parameters, a default is set to ac ( 1 0 )
2021-09-29 20:28:15 +02:00
81df6ed772
Retaining the mixed case of Cider quoted string valued parameters. Limit searches for ic.file to D*, M*, and Q* device instantiation lines. Cider model (numos, numd, nbjt) detection is limited to .model lines. Continuation lines which do contain these tokens are not checked, but this should rarely happen. All of the examples/cider circuits meet these assumptions. Memory errors have been removed.
2021-09-29 20:27:29 +02:00
3599c189b6
re-enable lower-casing of tokens beginning with 'cd',
...
except for command 'cd' which is usually followed by a space.
2021-09-29 20:27:05 +02:00
0266bd5894
make PTparse error message more verbose:
...
include point in a line where parsing failed.
2021-09-29 20:26:42 +02:00
abad190b38
Don't search for ic.file within comments.
2021-09-29 20:23:26 +02:00
b3a99f0c6c
Do not use non-portable strcasestr.
2021-09-29 20:23:08 +02:00
663a79dea8
Fix NAN error in numd2 area report and crashes when a doping file is missing. Update examples/cider so that the test circuits all run; add case sensitivity tests for rootfile and ic.file parameter strings enclosed in a single pair of double quotes.
2021-09-29 20:22:56 +02:00
68c5eb2d6b
Add resistance sweep error message for failing optran
2021-09-29 20:22:34 +02:00
8708b6651b
Optran may throw an error message while in temp sweep
...
and optran fails: message added (in addition prevent a crash)
2021-09-29 20:22:15 +02:00
1b3e192bfd
errno needs to be nulled in Linux.
...
Its previous value will be returned after checking.
2021-09-29 20:21:39 +02:00
e84c210876
'Option interp' and command 'stop' have been incompatible.
...
Allow both in a run.
Issue note (however not checked) that stop time data have to fit
the inpolated times.
2021-09-29 20:21:23 +02:00
e35e3e3b33
prevent a crash, e.g. when incompatible 'option interp'
...
is set and 'stop' is called.
2021-09-29 20:20:52 +02:00
a180eb60d5
command 'wrnodev'
...
Write current node voltages to file in format .ic=value
The file may be used to set initial conditions for another simulation,
e.g. ac at a specific time step of a transient simulation.
2021-09-29 20:20:27 +02:00
7f4fc2948b
Add a line feed to make message more readable.
2021-09-29 20:20:00 +02:00
fac1d3a79c
ASRC (B-Source) error message is cryptic, as it does not tell
...
which B-Source failed.
Add a hint to the ASRC error message on the name of the
B-Source instance.
2021-09-29 20:19:38 +02:00
18478380ad
Revise the SOA and add new parameters:
...
pd_max id_max idr_max te_max rth_ext derating
rth_ext is currently not used
2021-09-29 20:17:55 +02:00
3f322e1954
Add a check for sys/sysctrl.h, which has been declared deprecated,
...
and which may not be available (in the future) on some systems.
2021-09-29 20:17:23 +02:00
3b245ddd82
VDMOS, prepare SOA with new parameters
...
Model parameters pd_max, id_max, idr_max, and te_max
(power dissipated, drain current, drain reverse current, temperature)
2021-09-29 20:17:03 +02:00
4a1f7f950c
spinit: add optran to the standard inits
2021-09-29 20:16:09 +02:00
7c84e3f993
SOA for bipolar
...
Replace pow_max by pd_max
2021-09-29 20:15:41 +02:00
f06496c912
Enable command 'optran' in spinit or .spiceinit,
...
when the circuit is not yet loaded.
Then the optran data are stored in static variables,
until optran is called again with arg NULL from inp.c,
to set the data in ft_curckt->ci_defTask.
2021-09-29 20:15:13 +02:00
a225ce2aaf
List definition needs spaces between ( and next token,
...
and between token and )
Update to comment.
2021-09-29 20:14:45 +02:00
493cf73f7f
optran is only selected when the 'optran' command has been processed.
...
If not, the call to the OPtran() function returns the previous
'converged' value.
2021-09-29 20:12:52 +02:00
7f1fdd3934
Don't do optran, if command optran is not given.
2021-09-29 20:12:31 +02:00
711157e85d
Update comment: 0 is no initial iteration
2021-09-29 20:12:03 +02:00
f0cb886af1
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-09-29 20:11:45 +02:00
0e72287af7
Add command 'write_ic'
...
Write out the right hand side status of the matrix in format
.ic = V(node_xx)
This may be possible at the end of a simulation or after a 'stop'
of the simulation, which may be resumed again afterwars. This
status may be used to start another simulation with these
parameters by inluding into the netlist.
2021-09-29 20:11:13 +02:00
2ef3f66f96
if 'set ngdebug' print out transient initial conditions also with UIC set.
2021-09-29 20:10:25 +02:00
41ead284f3
make the error detection work properly
2021-09-29 20:10:02 +02:00
4e03efacb7
Use InpEvaluate() instead of strtod to enable ngspice numbers
...
with scale factors Meg k m u n p f etc.
2021-09-29 20:09:22 +02:00
3be5926f2c
Reverse stepsize and finaltime in optran command,
...
stepsize first as in tran command.
2021-09-29 20:08:51 +02:00
bca099ca29
prevent crash if first breakpoint is beyond optran max time
2021-09-29 20:08:28 +02:00
b07a54b8e1
test of supply ramping
2021-09-29 20:07:42 +02:00
7de526237e
upon finishing 'optran', restore old CKTstep
...
remove unused
2021-09-29 20:06:35 +02:00
0eafec254e
safeguard command 'optran' against circuit no being loaded
2021-09-29 20:05:56 +02:00
cf61e1e564
add missing header
2021-09-29 20:05:28 +02:00
83e223fafc
header for optran
2021-09-29 20:05:08 +02:00
a20afc54a5
When we sre ready, reset CKTmaxstep to its previous value
2021-09-29 20:04:26 +02:00
3956095484
set maxstepsize to stepsize
2021-09-29 20:04:08 +02:00
ecdb3b9eb4
set the task values, not the ckt values,
...
because task is called only afterwards when
the simulation command is given.
2021-09-29 20:03:31 +02:00
fd36eb552f
set stepsize
2021-09-29 20:02:11 +02:00
ab6224767b
Add command 'optran' to set 6 flags for transient op
2021-09-29 20:01:44 +02:00
df0792818f
Transient op calculation added to the standard operating point code.
...
When standard iteration, gmin stepping and source stepping fail,
try a transient simulation (like tran with uic option) to
determine the op. Implemented for AC and Tran simulation.
2021-09-29 20:00:29 +02:00
a08e6a0676
Add new SOA parameters (safe operating area) for BJT.
...
We now scan for max of Ic, Ib, power, taking into
account the max allowed temperature, using the thermal
resistance rth0 model parameter between juntion and ambient.
Two user options are there: If rth0 is given, we calculate
a derating of the max power allowed.
Without a constant max power according to model param pow_max
is assumed.
The new model parameters for the bipolar model are:
pow_max, ic_max, ib_max, te_max, and rth0, in addition
to the already existing vbe_max, vbc_max, adn vce_max.
2021-09-29 19:59:58 +02:00
1084b4205c
Allow global .temp in addition to instance parameter 'temp'.
...
Update to comments.
2021-09-29 19:59:28 +02:00
9221df234c
Patch to allow (and ignore) leading or trailing commas
...
when putting {} around tokens. Tested with PWL voltage source.
Patch has been suggested by Liqian Zhang
2021-09-29 19:58:36 +02:00
33571877dc
Some update to SOA for a diode:
...
Limit output to four digits
Add power and temperature limits.
Derating with self-heating, or with fixed temperature,
or no derating at all, selectable by setting model parameters.
Example file: SOA plotted as frame, with diode current.
2021-09-29 19:58:11 +02:00
759f4f5f84
Make the output a little more verbose:
...
add terminal voltage to Id, Te, and Pd outputs.
Compare SOA data to terminal voltage, not (unknown) junction voltage.
2021-09-29 19:57:54 +02:00
9c8380a031
Enhance the SOA (safe operating area) operations
...
Parameters id_max, pd_max and te_max have been added
for current, power, and temperature to the already existing
fv_max and bv_max (max forward and backward volteges).
2021-09-29 19:57:34 +02:00
e5fdb4c742
Patch sorts 1 byte vars in sequence,
...
to save some memory.
Patch #107 provided by Florian Ballenegger
2021-09-29 19:57:08 +02:00
2c2e21a80c
Smal typo fixup s/currntly/currently
2021-08-08 11:56:30 +02:00
605f59b417
Fix a bug with the alter statement
...
lower case for device name, when sent from shared ngspice
or from interactive mode.
2021-08-08 10:21:22 +02:00
9a2d968577
When transferring boolean data over the ABI, keep them as boolean types, not integer
...
Replace the type of all boolean variables around the ABI by NG_BOOL.
NG_BOOL is typedefed to _Bool, when compiling shared ngspice. When
sharedspice.h is use externally NG_BOOL is typdefed to bool
2021-08-03 15:57:58 +02:00
61b5c0563b
src/Makefile.am: Adopt used variables for lib versioning
...
A small adjustment so the configured ABI version from configure.ac will
get used for creating the libngspice library.
2021-08-03 15:56:02 +02:00
4258fe94b5
Add library versioning according to
...
https://www.gnu.org/software/libtool/manual/html_node/Libtool-versioning.html#Libtool-versioning
Add package versioning with m4 macros
2021-08-03 15:55:16 +02:00
6aac403ab0
XSPICE delay: add some more safeguards
2021-08-03 15:53:42 +02:00
4feb43e067
Prepare ngspice-35
2021-07-22 20:38:08 +02:00
4dbd8b7f9a
Preliminary fix for the 'interpolate' function.
...
Interpolation of 1D vectors is o.k. now,
multi-dimensional vectors are not (yet) supported.
2021-07-22 20:37:57 +02:00
1977128380
Prevent crash when CIDER diode models are used.
...
There is no third node in NUMD or NUMD2, so don't set
GENnode(fast)[i]. This patch fixes a bug introduced in
4895a4b5a
2021-07-20 14:24:43 +02:00
9cc9c56cad
Don't write past '\0', fixes a bug in commit
...
1c5e0d11d
2021-07-18 11:19:51 +02:00
b7473a33a0
Check for double '{', replace the inner '{', '}' by '(', ')'
...
in .subckt or .model (which both may stem from external sources)
2021-07-18 10:29:16 +02:00
85b07e35bf
Fixes bug 483
...
prevent crash when surface mobility (surfmob) has been
selected in 2D simulation.
The patch is provided by Brian Taylor (see
https://sourceforge.net/p/ngspice/mailman/ngspice-devel/thread/e6e921a3-677c-f513-7410-df8568c4bdad%40comcast.net/#msg37318450
)
2021-07-16 10:53:07 +02:00
1c5e0d11dd
If there is a XSPICE code model .model line
...
with file input, keep quotes and case for the file path.
2021-07-16 10:52:54 +02:00
15a3ed87c0
Enable the m parameter in E, G, B, R behavioral source/devices
2021-07-16 10:52:21 +02:00
973a60b898
re-enable making the old help system for Linux/Cygwin
...
by --enable-help --enable-oldapps
2021-07-08 15:34:41 +02:00
d34d1e7c7c
Get immediate response into text window,
...
when requesting information on coordinates.
2021-07-07 19:50:50 +02:00
182a4d3f5f
WinGUI: Push any remaining error message into text window
...
before emitting interactive error message window and exit.
2021-07-07 19:50:37 +02:00
ae72677cc2
Remove a false read when curr_line has
...
already been invalidated.
2021-07-05 19:43:25 +02:00
0f25c25c7e
Remove a memory leak
...
Make inp_rem_levels non-static
and use it to remove 'root' after it has been used.
2021-07-05 19:42:14 +02:00
54cbfb4138
Nodedamping: Make difference independent of the sign
...
of the difference
2021-07-05 14:32:57 +02:00
c74321e0f5
JFET2: Add a link to literature
2021-07-05 14:32:47 +02:00
93ddc7a3eb
Enhancement for E source with table, convert to B source with pwl:
...
Add G source
Allow 'table' also being part of a parameter name like 'table_something'
2021-07-05 14:32:34 +02:00
0ece04cdc8
Add channel type determination belong nmos/pmos model parameter
2021-07-05 14:32:14 +02:00
fe158341ba
Don't show message for every iteration
2021-07-05 14:31:47 +02:00
c38b8e3615
Fix a bug in the 'dc' progress report
2021-07-05 14:31:32 +02:00
8eeb924460
CIDER: Enable printing either binary or ascii data output to file.
...
Patch provided by Brian Taylor, see
(https://sourceforge.net/p/ngspice/mailman/message/37309841/ )
2021-07-05 14:31:21 +02:00
9bb401d9cd
Add a 'qsort' dummy according to current compiler standards.
...
Detected during the very rare condition of not finding a 'qsort'
during the ./configure step.
2021-07-05 14:31:08 +02:00
76eac5aa0f
Make error message more verbode
2021-07-05 14:30:35 +02:00
a4be66b9b0
Prevent crash if there is bad syntax in h, g, e, or f line
2021-07-05 14:30:26 +02:00
31fbf910af
Crash when trying to delete root and netlist:
...
Revert the order of deletion: Firstly the root, then the netlist.
2021-07-05 14:30:08 +02:00
858689d206
Make syntax check for nesting of .subckt ... .ends more verbose:
...
Try to find out where .subckt/.ends may be doubled, or missing.
2021-07-05 14:29:50 +02:00
52b5e218c7
Add '\f' to characters to be replace by '+'
...
during the syntax check of an netlist input file.
2021-07-05 14:29:35 +02:00
Holger Vogt
dwarning
Brian Taylor
Keno Fischer
Carsten Schoenert