Merge branch 'master' into netgen-1.5

print statement, and clarified the messages about non-matching
circuits at the end, all of them suggestions made by Mitch
Bailey (see issue #34 on github).

.github/workflows/main.yml

@@ -0,0 +1,40 @@
+# This is a basic workflow to help you get started with Actions
+
+name: CI
+
+# Controls when the workflow will run
+on:
+  # Triggers the workflow on push or pull request events but only for the master branch
+  push:
+    branches: [ master ]
+  pull_request:
+    branches: [ master ]
+
+  # Allows you to run this workflow manually from the Actions tab
+  workflow_dispatch:
+
+# A workflow run is made up of one or more jobs that can run sequentially or in parallel
+jobs:
+  # This workflow contains a single job called "build"
+  build:
+    # The type of runner that the job will run on
+    runs-on: ubuntu-latest
+
+    # Steps represent a sequence of tasks that will be executed as part of the job
+    steps:
+      # Runs a set of commands using the runners shell
+      #- name: Logging into Dockerhub
+      #  run: docker login -u ${{ secrets.DOCKERHUB_USERNAME }} -p ${{ secrets.DOCKERHUB_PASSWORD }}
+        
+      - name: Pulling the docker image
+        run: docker pull vezzal/vezzal:v1
+        
+      - name: Start the container with the docker image
+        run: docker run -id --name test_netgen vezzal/vezzal:v1 bash | exit
+        
+      - name: Run the testing on the container and send the mail
+        run: docker exec test_netgen /vezzal/test_netgen.sh "[email protected],[email protected]" ${{ secrets.MAILING_KEY }}
+        
+  
+      
+          

README.md

@@ -1,4 +1,8 @@
-NETGEN:  VERSION 1.5
+![Continuous Integration](https://github.com/RTimothyEdwards/netgen/actions/workflows/main.yml/badge.svg)
+
+# NETGEN
+
+### VERSION 1.5
 
 NETGEN is a general-purpose netlist management system.  It can read
 and write several netlist formats, including NTK (Caltech, CMU),
@@ -87,6 +91,49 @@ and IRSIM version 9.7:
 
 Note: For FreeBSD, use 'gmake' instead.
 
+Note: On MacOS (Big Sur) follow the following procedure. If you have installed `xschem` and `magic` already on MacOS then steps (1) and (2) can likely be skipped.
+
+**1) Build Tcl for X11**
+
+We are following the instructions from `xschem` (https://github.com/StefanSchippers/xschem/blob/master/README_MacOS.md). 
+
+* Download `Tcl` from https://prdownloads.sourceforge.net/tcl/tcl8.6.10-src.tar.gz
+
+We are using not `opt` but `opt2` so that this `Tcl` does not interfere with `tcl-tk` from HomeBrew.
+
+```
+./configure --prefix=/usr/local/opt2/tcl-tk  
+make
+make install
+```
+
+**2) Build Tk for X11**
+
+* Download `Tk` from https://prdownloads.sourceforge.net/tcl/tk8.6.10-src.tar.gz
+
+```
+./configure --prefix=/usr/local/opt2/tcl-tk \
+--with-tcl=/usr/local/opt2/tcl-tk/lib --with-x \
+--x-includes=/opt/X11/include --x-libraries=/opt/X11/lib  
+make
+make install
+```
+
+**3) Build netgen**
+
+We need to provide this custom-built `tcl-tk` and suppress compilation errors.
+
+```
+./configure --with-tcl=/usr/local/opt2/tcl-tk/lib \
+--with-tk=/usr/local/opt2/tcl-tk/lib \
+--x-includes=/opt/X11/include \
+--x-libraries=/opt/X11/lib \
+CFLAGS=-Wno-error=implicit-function-declaration
+make
+make install
+```
+
+
 IN CASE OF FAILURE
 -------------------
 Please contact me (tim@opencircuitdesign.com) to report compile-time and

VERSION

@@ -1 +1 @@
-1.5.196
+1.5.205

base/flatten.c

@@ -259,13 +259,16 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
   struct objlist *ChildObjList, *ChildListEnd;
   struct objlist *ChildStart, *ChildEnd, *ParentEnd, *ParentNext;
   struct nlist *ThisCell;
-  struct  nlist *ChildCell;
+  struct nlist *ChildCell;
   struct objlist *tmp, *ob2, *ob3;
-  int	notdone, rnodenum;
-  char	tmpstr[1024];
-  int	nextnode, oldmax, numflat = 0;
+  int	 notdone, rnodenum;
+  char	 tmpstr[1024];
+  int	 nextnode, oldmax, numflat = 0;
+  struct objlist *myObject_p, *myPort_p;
+  struct objlist *myFirstPin_p, *myPin_p;
+  int    myDeleteCount = 0;
 #if !OLDPREFIX
-  int     prefixlength;
+  int    prefixlength;
 #endif
 
   if (name == NULL) {
@@ -599,6 +602,38 @@ int flattenInstancesOf(char *name, int fnum, char *instance)
   }
   CacheNodeNames(ThisCell);
   ThisCell->dumped = 1;		/* indicate cell has been flattened */
+
+  // Remove disconnected ports.
+  // Fprintf(stdout, "DEBUG: check pins for %s of %d\n", name, fnum);
+
+  myFirstPin_p = NULL;
+
+  // Save first pin definition so we don't have to search for each port
+  for (myObject_p = ThisCell->cell; myObject_p != NULL; myObject_p = myObject_p->next) {
+    if (myObject_p->type >= FIRSTPIN) {
+      myFirstPin_p = myObject_p;
+      break;
+    }
+  }
+  if (myFirstPin_p != NULL) {  // Not a black box. Black boxes contain no pins.
+    // For each port, check for pin connection. If none, mark for deletion. 
+    // Assumes that all ports occur at the beginning of the list
+    for (myPort_p = ThisCell->cell; myPort_p != NULL && IsPort(myPort_p);
+		myPort_p = myPort_p->next ) {
+      for (myPin_p = myFirstPin_p; myPin_p != NULL; myPin_p = myPin_p->next) {
+        if (myPort_p->node == myPin_p->node) {  // only need to find one connection
+          break;
+        }
+      }
+      if (myPin_p == NULL) {  // mark disconnected ports
+        myDeleteCount++;
+        myPort_p->node = -2;
+      }
+    }
+    if (myDeleteCount > 0) {  // delete disconnected ports
+      CleanupPins(name, fnum);
+    }
+  }
   return numflat;
 }
 
@@ -1582,7 +1617,8 @@ PrematchLists(char *name1, int file1, char *name2, int file2)
 			}
 		    }
 		    else {
-		       match = 0;
+		       // Apply recursive flattening when a cell exists in
+		       // one circuit but not the other.
 		       break;
 		    }
 		}

base/netcmp.c

@@ -6892,11 +6892,6 @@ int reorderpins(struct hashlist *p, int file)
 		"Ordering will be arbitrary.\n", tc2->name);
 
     for (ob = ptr->cell; ob != NULL; ) {
-        /* Catch badness */
-	if (ob->next && (ob->next->node > 100000)) {
-	    Fprintf(stdout, "Bad.\n");
-	} 
-
 	if (ob->type == FIRSTPIN) {
 	    if ((*matchfunc)(ob->model.class, tc2->name)) {
 		char *sptr = ob->instance.name;

python/Makefile

@@ -29,6 +29,7 @@ lvs_manager.py: lvs_manager.py.in
 $(DESTDIR)${INSTALL_PYDIR}/lvs_manager.py: lvs_manager.py
 	${RM} $@
 	${CP} lvs_manager.py $@
+	chmod a+x $@
 
 $(DESTDIR)${INSTALL_PYDIR}/treeviewsplit.py: treeviewsplit.py
 	${RM} $@

python/lvs_manager.py

@@ -1,891 +0,0 @@
-#!/bin/env python3
-#
-#--------------------------------------------------------
-# LVS Manager GUI.
-#
-# This is a Python tkinter script that handles the
-# process of running LVS and interpreting results.
-#
-#--------------------------------------------------------
-# Written by Tim Edwards
-# efabless, inc.
-# Version 1.  November 30, 2016
-# Version 2.  March 6, 2017.  Reads JSON format output
-# Version 3.  April 25, 2018. Handles layout vs. verilog
-#--------------------------------------------------------
-
-import io
-import os
-import re
-import sys
-import json
-import shutil
-import signal
-import socket
-import select
-import datetime
-import contextlib
-import subprocess
-
-import tkinter
-from tkinter import ttk
-from tkinter import filedialog
-
-import tksimpledialog
-import tooltip
-from consoletext import ConsoleText
-from helpwindow import HelpWindow
-from treeviewsplit import TreeViewSplit
-
-# User preferences file (if it exists)
-prefsfile = '~/.profile/prefs.json'
-
-netgen_script_dir = '/usr/local/lib/netgen/python'
-
-#------------------------------------------------------
-# Simple dialog for confirming quit
-#------------------------------------------------------
-
-class ConfirmDialog(tksimpledialog.Dialog):
-    def body(self, master, warning, seed):
-        if warning:
-            ttk.Label(master, text=warning, wraplength=500).grid(row = 0, columnspan = 2, sticky = 'wns')
-        return self
-
-    def apply(self):
-        return 'okay'
-
-#------------------------------------------------------
-# Main class for this application
-#------------------------------------------------------
-
-class LVSManager(ttk.Frame):
-    """LVS Manager GUI."""
-
-    def __init__(self, parent, *args, **kwargs):
-        ttk.Frame.__init__(self, parent, *args, **kwargs)
-        self.root = parent
-        self.init_gui()
-        parent.protocol("WM_DELETE_WINDOW", self.on_quit)
-
-    def on_quit(self):
-        """Exits program."""
-        if self.msock:
-            self.msock.close()
-        quit()
-
-    def init_gui(self):
-        """Builds GUI."""
-        global prefsfile
-
-        message = []
-        fontsize = 11
-
-        # Read user preferences file, get default font size from it.
-        prefspath = os.path.expanduser(prefsfile)
-        if os.path.exists(prefspath):
-            with open(prefspath, 'r') as f:
-                self.prefs = json.load(f)
-            if 'fontsize' in self.prefs:
-                fontsize = self.prefs['fontsize']
-        else:
-            self.prefs = {}
-
-        s = ttk.Style()
-
-        available_themes = s.theme_names()
-        s.theme_use(available_themes[0])
-
-        s.configure('bg.TFrame', background='gray40')
-        s.configure('italic.TLabel', font=('Helvetica', fontsize, 'italic'))
-        s.configure('title.TLabel', font=('Helvetica', fontsize, 'bold italic'),
-                        foreground = 'brown', anchor = 'center')
-        s.configure('normal.TLabel', font=('Helvetica', fontsize))
-        s.configure('red.TLabel', font=('Helvetica', fontsize), foreground = 'red')
-        s.configure('green.TLabel', font=('Helvetica', fontsize), foreground = 'green3')
-        s.configure('blue.TLabel', font=('Helvetica', fontsize), foreground = 'blue')
-        s.configure('normal.TButton', font=('Helvetica', fontsize),
-                        border = 3, relief = 'raised')
-        s.configure('red.TButton', font=('Helvetica', fontsize), foreground = 'red',
-                        border = 3, relief = 'raised')
-        s.configure('green.TButton', font=('Helvetica', fontsize), foreground = 'green3',
-                        border = 3, relief = 'raised')
-        s.configure('blue.TButton', font=('Helvetica', fontsize), foreground = 'blue',
-                        border = 3, relief = 'raised')
-        s.configure('redtitle.TButton', font=('Helvetica', fontsize, 'bold italic'),
-                        foreground = 'red', border = 3, relief = 'raised')
-        s.configure('bluetitle.TButton', font=('Helvetica', fontsize, 'bold italic'),
-                        foreground = 'blue', border = 3, relief = 'raised')
-
-        # These values to be overridden from arguments
-        self.rootpath = None
-        self.project = None
-        self.logfile = None
-        self.msock = None
-        self.help = None
-
-        # Create the help window
-        if os.path.exists(netgen_script_dir + '/netgen_help.txt'):
-            self.help = HelpWindow(self, fontsize = fontsize)
-            with io.StringIO() as buf, contextlib.redirect_stdout(buf):
-                self.help.add_pages_from_file('lvs_help.txt')
-                message = buf.getvalue()
-
-            # Set the help display to the first page
-            self.help.page(0)
-
-        # Variables used by option menus and other stuff
-        self.project = "(no selection)"
-        self.layout = "(default)"
-        self.schematic = "(default)"
-        self.tech = "(none)"
-        self.lvs_setup = ''
-        self.lvsdata = {}
-
-        # Root window title
-        self.root.title('LVS Manager')
-        self.root.option_add('*tearOff', 'FALSE')
-        self.pack(side = 'top', fill = 'both', expand = 'true')
-
-        pane = tkinter.PanedWindow(self, orient = 'vertical', sashrelief='groove', sashwidth=6)
-        pane.pack(side = 'top', fill = 'both', expand = 'true')
-        self.toppane = ttk.Frame(pane)
-        self.botpane = ttk.Frame(pane)
-
-        # Get username
-        if 'username' in self.prefs:
-            username = self.prefs['username']
-        else:
-            username = os.environ['USER']
-
-        # Label with the user
-        self.toppane.title_frame = ttk.Frame(self.toppane)
-        self.toppane.title_frame.pack(side = 'top', fill = 'x')
-
-        self.toppane.title_frame.title = ttk.Label(self.toppane.title_frame, text='User:', style = 'red.TLabel')
-        self.toppane.title_frame.user = ttk.Label(self.toppane.title_frame, text=username, style = 'blue.TLabel')
-
-        self.toppane.title_frame.title.grid(column=0, row=0, ipadx = 5)
-        self.toppane.title_frame.user.grid(column=1, row=0, ipadx = 5)
-
-        self.toppane.title2_frame = ttk.Frame(self.toppane)
-        self.toppane.title2_frame.pack(side = 'top', fill = 'x')
-        self.toppane.title2_frame.project_label = ttk.Label(self.toppane.title2_frame, text="Project:",
-                style = 'title.TLabel')
-        self.toppane.title2_frame.project_label.grid(column=0, row=0, ipadx = 5)
-
-        # New project select button
-        self.toppane.title2_frame.project_select = ttk.Button(self.toppane.title2_frame,
-                text=self.project, style='normal.TButton', command=self.choose_project)
-        self.toppane.title2_frame.project_select.grid(column=1, row=0, ipadx = 5)
-
-        tooltip.ToolTip(self.toppane.title2_frame.project_select,
-                        text = "Select new project")
-
-        # Show path to project
-        self.toppane.title2_frame.path_label = ttk.Label(self.toppane.title2_frame, text=self.project,
-                style = 'normal.TLabel')
-        self.toppane.title2_frame.path_label.grid(column=2, row=0, ipadx = 5, padx = 10)
-
-        # Show top-level layout cellname with select button.  Initial cell name is the top-level cell.
-        self.toppane.title2_frame.tech_label = ttk.Label(self.toppane.title2_frame, text="Technology setup:",
-                style = 'title.TLabel')
-
-        self.toppane.title2_frame.tech_label.grid(column=3, row=0, ipadx = 5)
-        self.toppane.title2_frame.tech_select = ttk.Button(self.toppane.title2_frame,
-                text=self.tech, style='normal.TButton', command=self.choose_tech)
-        self.toppane.title2_frame.tech_select.grid(column=4, row=0, ipadx = 3, padx = 3)
-
-        self.toppane.title2_frame.layout_label = ttk.Label(self.toppane.title2_frame, text="Layout:",
-                style = 'title.TLabel')
-        self.toppane.title2_frame.layout_label.grid(column=0, row=1, ipadx = 5)
-        self.toppane.title2_frame.layout_select = ttk.Button(self.toppane.title2_frame,
-                text=self.layout, style='normal.TButton', command=self.choose_layout)
-        self.toppane.title2_frame.layout_select.grid(column=1, row=1, ipadx = 3, padx = 3)
-
-        # Show top-level schematic cellname with select button.  Initial cell name is the top-level cell.
-        self.toppane.title2_frame.schem_label = ttk.Label(self.toppane.title2_frame, text="Schematic:",
-                style = 'title.TLabel')
-        self.toppane.title2_frame.schem_label.grid(column=3, row=1, ipadx = 5)
-        self.toppane.title2_frame.schem_select = ttk.Button(self.toppane.title2_frame,
-                text=self.schematic, style='normal.TButton', command=self.choose_netlist)
-        self.toppane.title2_frame.schem_select.grid(column=4, row=1, ipadx = 3, padx = 3)
-
-        tooltip.ToolTip(self.toppane.title2_frame.project_select,
-                        text = "Select new project")
-        tooltip.ToolTip(self.toppane.title2_frame.layout_select,
-                        text = "Select a layout subcirucit to compare")
-        tooltip.ToolTip(self.toppane.title2_frame.schem_select,
-                        text = "Select a schematic subcirucit to compare")
-
-        #---------------------------------------------
-        ttk.Separator(self.toppane, orient='horizontal').pack(side = 'top', fill = 'x')
-        #---------------------------------------------
-
-        # Create listbox of Circuit1 vs. Circuit2 results
-        height = 10
-        self.toppane.lvsreport = TreeViewSplit(self.toppane, fontsize = fontsize)
-        self.toppane.lvsreport.populate("Layout:", [], "Schematic:", [],
-			[["Run", True, self.run_lvs],
-			# ["Find", True, self.findrecord]
-			], height = height)
-        self.toppane.lvsreport.set_title("Line")
-        self.toppane.lvsreport.pack(side = 'top', fill = 'both', expand = 'true')
-
-        tooltip.ToolTip(self.toppane.lvsreport.get_button(0), text="Run LVS")
-
-        #---------------------------------------------
-        # ttk.Separator(self, orient='horizontal').grid(column=0, row=3, sticky='ew')
-        #---------------------------------------------
-
-        # Add a text window below the project name to capture output.  Redirect
-        # print statements to it.
-
-        self.botpane.console = ttk.Frame(self.botpane)
-        self.botpane.console.pack(side = 'top', fill = 'both', expand = 'true')
-
-        self.text_box = ConsoleText(self.botpane.console, wrap='word', height = 4)
-        self.text_box.pack(side='left', fill='both', expand='true')
-        console_scrollbar = ttk.Scrollbar(self.botpane.console)
-        console_scrollbar.pack(side='right', fill='y')
-        # attach console to scrollbar
-        self.text_box.config(yscrollcommand = console_scrollbar.set)
-        console_scrollbar.config(command = self.text_box.yview)
-
-        # Add button bar at the bottom of the window
-        self.botpane.bbar = ttk.Frame(self.botpane)
-        self.botpane.bbar.pack(side = 'top', fill = 'x')
-
-        # Define the "quit" button and action
-        self.botpane.bbar.quit_button = ttk.Button(self.botpane.bbar, text='Quit', command=self.on_quit,
-                style = 'normal.TButton')
-        self.botpane.bbar.quit_button.grid(column=0, row=0, padx = 5)
-
-        # Define help button
-        if self.help:
-            self.botpane.bbar.help_button = ttk.Button(self.botpane.bbar, text='Help',
-		command=self.help.open, style = 'normal.TButton')
-            self.botpane.bbar.help_button.grid(column = 2, row = 0, padx = 5)
-            tooltip.ToolTip(self.botpane.bbar.help_button, text = "Show help window")
-
-        # Add the panes once the internal geometry is known.
-        pane.add(self.toppane)
-        pane.add(self.botpane)
-        pane.paneconfig(self.toppane, stretch='first')
-
-        # Redirect stdout and stderr to the console as the last thing to do. . .
-        # Otherwise errors in the GUI get sucked into the void.
-
-        self.stdout = sys.stdout
-        self.stderr = sys.stderr
-        sys.stdout = ConsoleText.StdoutRedirector(self.text_box)
-        sys.stderr = ConsoleText.StderrRedirector(self.text_box)
-
-        if message:
-            print(message)
-
-    def logprint(self, message, doflush=False):
-        if self.logfile:
-            self.logfile.buffer.write(message.encode('utf-8'))
-            self.logfile.buffer.write('\n'.encode('utf-8'))
-            if doflush:
-                self.logfile.flush()
-
-    def printout(self, output):
-        # Generate output
-        if not output:
-            return
-
-        outlines = output.splitlines()
-        for line in outlines:
-            try:
-                print(line)
-            except TypeError:
-                line = line.decode('utf-8')
-                pritn(line)
-
-    def printwarn(self, output):
-        # Check output for warning or error
-        if not output:
-            return 0
-
-        warnrex = re.compile('.*warning', re.IGNORECASE)
-        errrex = re.compile('.*error', re.IGNORECASE)
-
-        errors = 0
-        outlines = output.splitlines()
-        for line in outlines:
-            try:
-                wmatch = warnrex.match(line)
-            except TypeError:
-                line = line.decode('utf-8')
-                wmatch = warnrex.match(line)
-            ematch = errrex.match(line)
-            if ematch:
-                errors += 1
-            if ematch or wmatch:
-                print(line)
-        return errors
-
-    def choose_tech(self):
-        try:
-            project_path = self.rootpath
-            initdirname = self.rootpath + '/tech',
-        except:
-            print('Must choose a project first.')
-            return
-        techname = filedialog.askopenfilename(multiple=False,
-			initialdir = initdirname,
-			filetypes = (("Tcl script", "*.tcl"),("All Files","*.*")),
-			title = "Choose a netgen technology setup script.")
-        if techname != '':
-            print("Selected technology setup script " + techname)
-            techbase = os.path.split(techname)[1]
-            self.tech = os.path.splitext(techbase)[0]
-            self.lvs_setup = techname
-            self.toppane.title2_frame.tech_select.config(text = self.tech)
-
-    def choose_layout(self):
-        try:
-            project_path = self.rootpath
-            initdirname = self.rootpath + '/layout',
-        except:
-            print('Must choose a project first.')
-            return
-        cellname = filedialog.askopenfilename(multiple=False,
-			initialdir = initdirname,
-			filetypes = (("Magic layout", "*.mag"),("All Files","*.*")),
-			title = "Choose a layout cell to compare.")
-        if cellname != '':
-            print("Selected compare cell " + cellname)
-            self.layout = cellname
-            cellbase = os.path.split(cellname)[1]
-            layoutname = os.path.splitext(cellbase)[0]
-            self.toppane.title2_frame.layout_select.config(text = layoutname)
-            fileext = os.path.splitext(cellbase)[1]
-            if fileext == '.mag':
-                self.toppane.title2_frame.layout_label.config(text = 'Layout:')
-            else:
-                self.toppane.title2_frame.layout_label.config(text = 'Layout netlist:')
-
-    def choose_netlist(self):
-        try:
-            project_path = self.rootpath
-            initdirname = self.rootpath + '/netlist/' + self.project + '.spice'
-        except:
-            print('Must choose a project first.')
-            return
-        cellname = filedialog.askopenfilename(multiple=False,
-			initialdir = initdirname,
-			filetypes = (("Spice netlist", "*.spice"),("Verilog netlist", "*.v"),("All Files","*.*")),
-			title = "Choose a netlist to compare.")
-        if cellname != '':
-            print("Selected compare cell " + cellname)
-            self.schematic = cellname
-            cellbase = os.path.split(cellname)[1]
-            schematic_name = os.path.splitext(cellbase)[0]
-            self.toppane.title2_frame.schem_select.config(text = schematic_name)
-            fileext = os.path.splitext(cellbase)[1]
-            if fileext == '.v':
-                self.toppane.title2_frame.schem_label.config(text = 'Verilog netlist:')
-            elif fileext == '.sp' or fileext == '.spice' or fileext == '.spi' or fileext == '.spc' or fileext == '.ckt':
-                self.toppane.title2_frame.schem_label.config(text = 'SPICE netlist:')
-            elif fileext == '.cdl':
-                self.toppane.title2_frame.schem_label.config(text = 'CDL netlist:')
-            else:
-                self.toppane.title2_frame.schem_label.config(text = 'Unknown netlist:')
-
-    def choose_project(self):
-        project = filedialog.askdirectory(initialdir = os.getcwd(),
-			title = "Find a project.")
-        if project != '':
-            print("Selected project " + str(project))
-            result = self.set_project(project)
-
-    def set_project(self, rootpath, project_name=None):
-
-        # Check if rootpath is valid.  For LVS, there should be subdirectories
-        # "layout/" and "netlist/" or "verilog/".
-
-        haslay = os.path.isdir(rootpath + '/layout')
-        hasvlog = os.path.isdir(rootpath + '/verilog')
-        hasnet = os.path.isdir(rootpath + '/netlist')
-        if not haslay or not (hasvlog or hasnet):
-            if not haslay:
-                print("Project path has no layout (/layout) subdirectory.")
-            if not (hasvlog or hasnet):
-                print("Project path has no verilog (/verilog), or netlist (/netlist) subdirectory.")
-            # Continue anyway;  assume that netlists will be selected manually
-
-        if self.logfile:
-            self.logfile.close()
-            self.logfile = None
-
-        if not project_name:
-            project = os.path.split(rootpath)[1]
-        else:
-            project = project_name
-
-        if self.project != project:
-
-            self.rootpath = rootpath
-            self.project = project
-
-            # Clear out old project data
-            self.toppane.lvsreport.repopulate([], [])
-
-            # Close any open logfile.
-            if self.logfile:
-                self.logfile.close()
-                self.logfile = None
-
-            # Put new log file called 'lvs.log' in the mag/ subdirectory
-            if os.path.exists(rootpath + '/layout'):
-                self.logfile = open(rootpath + '/layout/lvs.log', 'w')
-            else:
-                self.logfile = open(rootpath + '/lvs.log', 'w')
-            # Print some initial information to the logfile.
-            self.logprint('Starting new log file ' + datetime.datetime.now().strftime('%c'),
-				doflush=True)
-
-            # Update project button
-            self.toppane.title2_frame.project_select.config(text = self.project)
-            self.toppane.title2_frame.path_label.config(text = self.rootpath)
-            # Cell name is the same as project name initially
-            self.layout = self.project
-            self.schematic = self.project
-            layname = os.path.splitext(os.path.split(self.layout)[1])[0]
-            self.toppane.title2_frame.layout_select.config(text = layname)
-            schemname = os.path.splitext(os.path.split(self.schematic)[1])[0]
-            self.toppane.title2_frame.schem_select.config(text = schemname)
-
-            # Update schematic button
-            if os.path.splitext(self.schematic)[1] == '.v':
-                self.toppane.title2_frame.schem_label.config(text = 'Verilog netlist:')
-            else:
-                self.toppane.title2_frame.schem_label.config(text = 'Schematic netlist:')
-
-            # Update layout button
-            if os.path.splitext(self.layout)[1] == '.mag':
-                self.toppane.title2_frame.schem_label.config(text = 'Layout:')
-            else:
-                self.toppane.title2_frame.schem_label.config(text = 'Layout netlist:')
-
-            # If there is a comparison file that post-dates both netlists, load it.
-            self.check_lvs()
-        return True
-
-    def check_layout_out_of_date(self, spipath, layoutpath):
-        # Check if a netlist (spipath) is out-of-date relative to the layouts
-        # (layoutpath).  Need to read the netlist and check all of the subcells.
-        need_capture = False
-        if not os.path.isfile(spipath):
-            return True
-        if os.path.isfile(layoutpath):
-            spi_statbuf = os.stat(spipath)
-            lay_statbuf = os.stat(layoutpath)
-            if spi_statbuf.st_mtime < lay_statbuf.st_mtime:
-                # netlist exists but is out-of-date
-                need_capture = True
-            else:
-                # only found that the top-level-layout is older than the
-                # netlist.  Now need to read the netlist, find all subcircuits,
-                # and check those dates, too.
-                layoutdir = os.path.split(layoutpath)[0]
-                subrex = re.compile('^[^\*]*[ \t]*.subckt[ \t]+([^ \t]+).*$', re.IGNORECASE)
-                with open(spipath, 'r') as ifile:
-                    duttext = ifile.read()
- 
-                dutlines = duttext.replace('\n+', ' ').splitlines()
-                for line in dutlines:
-                    lmatch = subrex.match(line)
-                    if lmatch:
-                        subname = lmatch.group(1)
-                        sublayout = layoutdir + '/' + subname + '.mag'
-                        # subcircuits that cannot be found in the current directory are
-                        # assumed to be library components and therefore never out-of-date.
-                        if os.path.exists(sublayout):
-                            sub_statbuf = os.stat(sublayout)
-                            if spi_statbuf.st_mtime < lay_statbuf.st_mtime:
-                                # netlist exists but is out-of-date
-                                need_capture = True
-                                break
-        return need_capture
-
-    def check_schematic_out_of_date(self, spipath, schempath):
-        # Check if a netlist (spipath) is out-of-date relative to the schematics
-        # (schempath).  Need to read the netlist and check all of the subcells.
-        need_capture = False
-        if not os.path.isfile(spipath):
-            return True
-        if os.path.isfile(schempath):
-            spi_statbuf = os.stat(spipath)
-            sch_statbuf = os.stat(schempath)
-            if spi_statbuf.st_mtime < sch_statbuf.st_mtime:
-                # netlist exists but is out-of-date
-                need_capture = True
-            else:
-                # only found that the top-level-schematic is older than the
-                # netlist.  Now need to read the netlist, find all subcircuits,
-                # and check those dates, too.
-                schemdir = os.path.split(schempath)[0]
-                subrex = re.compile('^[^\*]*[ \t]*.subckt[ \t]+([^ \t]+).*$', re.IGNORECASE)
-                with open(spipath, 'r') as ifile:
-                    duttext = ifile.read()
- 
-                dutlines = duttext.replace('\n+', ' ').splitlines()
-                for line in dutlines:
-                    lmatch = subrex.match(line)
-                    if lmatch:
-                        subname = lmatch.group(1)
-                        # NOTE: Electric uses library:cell internally to track libraries,
-                        # and maps the ":" to "__" in the netlist.  Not entirely certain that
-                        # the double-underscore uniquely identifies the library:cell. . .
-                        librex = re.compile('(.*)__(.*)', re.IGNORECASE)
-                        lmatch = librex.match(subname)
-                        if lmatch:
-                            elecpath = os.path.split(os.path.split(schempath)[0])[0]
-                            libname = lmatch.group(1)
-                            subschem = elecpath + '/' + libname + '.delib/' + lmatch.group(2) + '.sch'
-                        else:
-                            libname = {}
-                            subschem = schemdir + '/' + subname + '.sch'
-                        # subcircuits that cannot be found in the current directory are
-                        # assumed to be library components and therefore never out-of-date.
-                        if os.path.exists(subschem):
-                            sub_statbuf = os.stat(subschem)
-                            if spi_statbuf.st_mtime < sub_statbuf.st_mtime:
-                                # netlist exists but is out-of-date
-                                need_capture = True
-                                break
-                        # mapping of characters to what's allowed in SPICE makes finding
-                        # the associated schematic file a bit difficult.  Requires wild-card
-                        # searching.
-                        elif libname:
-                            restr = lmatch.group(2) + '.sch'
-                            restr = restr.replace('.', '\.')
-                            restr = restr.replace('_', '.')
-                            schrex = re.compile(restr, re.IGNORECASE)
-                            libpath = elecpath + '/' + libname + '.delib'
-                            if os.path.exists(libpath):
-                                liblist = os.listdir(libpath)
-                                for file in liblist:
-                                    lmatch = schrex.match(file)
-                                    if lmatch:
-                                        subschem = libpath + '/' + file
-                                        sub_statbuf = os.stat(subschem)
-                                        if spi_statbuf.st_mtime < sch_statbuf.st_mtime:
-                                            # netlist exists but is out-of-date
-                                            need_capture = True
-                                        break
-        return need_capture
-
-    def check_lvs(self):
-        # If both netlists exist, and comp.json is more recent than both, then
-        # load LVS results from comp.json
-        project_path = self.rootpath
-        project_name = self.project
-        layout_path = project_path + '/layout/' + project_name + '.spice'
-        net_path = project_path + '/netlist/' + project_name + '.spice'
-        comp_path = project_path + '/layout/comp.json'
-
-        if os.path.exists(layout_path) and os.path.exists(net_path) and os.path.exists(comp_path):
-            magtime = os.stat(layout_path).st_mtime
-            schemtime = os.stat(net_path).st_mtime
-            comptime = os.stat(comp_path).st_mtime
-            if comptime > magtime and comptime > schemtime:
-                print("Loading LVS results from file.")
-                self.generate(comp_path)
-
-    def generate_layout_netlist(self, layout_path, layout_src, project_path):
-        # Does layout netlist exist and is it current?
-        if self.check_layout_out_of_date(layout_path, layout_src):
-            print('Generating layout netlist.')
-            self.update_idletasks()
-            mproc = subprocess.Popen(['magic', '-dnull', '-noconsole',
-			self.layout], stdin = subprocess.PIPE, stdout = subprocess.PIPE,
-			stderr = subprocess.PIPE, cwd = project_path + '/layout',
-			universal_newlines = True)
-            mproc.stdin.write("select top cell\n")
-            mproc.stdin.write("expand\n")
-            mproc.stdin.write("extract all\n")
-            mproc.stdin.write("ext2spice hierarchy on\n")
-            mproc.stdin.write("ext2spice format ngspice\n")
-            mproc.stdin.write("ext2spice scale off\n")
-            mproc.stdin.write("ext2spice renumber off\n")
-            mproc.stdin.write("ext2spice subcircuit top auto\n")
-            mproc.stdin.write("ext2spice cthresh infinite\n")
-            mproc.stdin.write("ext2spice rthresh infinite\n")
-            mproc.stdin.write("ext2spice blackbox on\n")
-            mproc.stdin.write("ext2spice -o " + self.layout + ".spice\n")
-            mproc.stdin.write("quit -noprompt\n")
-            magicout = mproc.communicate()[0]
-            self.printwarn(magicout)
-            if mproc.returncode != 0:
-                print('Failure to generate new layout netlist.')
-                return False
-
-            # Move .spice netlist to project_dir/netlist/lvs/
-            shutil.move(project_path + '/layout/' + self.layout + '.spice', layout_path)
-            # Remove extraction files
-            for file in os.listdir(project_path + '/layout'):
-                if os.path.splitext(file)[1] == '.ext':
-                    os.remove(project_path + '/layout/' + file)
-        else:
-            print('Layout netlist is up-to-date, not regenerating.')
-        return True
-
-    def run_lvs(self, value):
-        # "value" is ignored (?)
-
-        # Check if netlists exist and are current;  otherwise create them.
-        # Then run LVS.
-
-        project_path = self.rootpath
-        project_name = self.project
-
-        # Diagnostic:
-        print('project_name is ' + project_name)
-        print('project_path is ' + project_path)
-        print('self.layout is ' + self.layout)
-        print('self.schematic is ' + self.schematic)
-        print('self.lvs_setup is ' + self.lvs_setup)
-
-        has_vlog = False
-        vlog_path = project_path + '/verilog/' + project_name + '.v'
-
-        if os.path.isfile(self.layout):
-            layout_path = self.layout
-            layout_src = None
-        else:
-            layout_path = project_path + '/netlist/lvs/' + self.layout + '.spice'
-            layout_src = project_path + '/layout/' + self.layout + '.mag'
-
-        comp_dir = os.path.split(layout_path)[0]
-        comp_path = comp_dir + '/comp.json'
-
-        if os.path.isfile(self.schematic):
-            net_path = self.schematic
-        else:
-            net_path = project_path + '/netlist/schem/' + self.schematic + '.spice'
-
-        # Does the setup file exist (this is optional)?
-        if self.lvs_setup == '' and not os.path.isfile('setup.tcl'):
-            print('No technology setup file selected.')
-        elif not os.path.isfile(self.lvs_setup):
-            print("Can't find technology setup file " + self.lvs_setup)
-
-        # Does schematic netlist exist?
-        if not os.path.isfile(vlog_path) and not os.path.isfile(net_path):
-            print('Error:  No schematic netlist or verilog netlist.')
-            return
-
-        # Does LVS netlist subdirectory exist?
-        if os.path.exists(project_path + '/netlist'):
-            if not os.path.exists(project_path + '/netlist/lvs'):
-                os.makedirs(project_path + '/netlist/lvs')
-
-        # Does layout netlist exist and is it current?
-        if layout_src:
-            if not self.generate_layout_netlist(layout_path, layout_src, project_path):
-                return False
-
-        # Final checks
-        if not os.path.isfile(layout_path):
-            print('Error:  No netlist generated from magic.')
-            return
-
-        else:
-            # Read in netlist and convert commas from [X,Y] arrays to vertical bars
-            # as something that can be converted back as necessary.  ngspice treats
-            # commas as special characters for some reason.
-            with open(layout_path) as ifile:
-                spitext = ifile.read()
-
-        # Check the netlist to see if the cell to match is a subcircuit.  If
-        # not, then assume it is the top level.
-
-        layoutcell = os.path.splitext(os.path.split(self.layout)[1])[0]
-        is_subckt = False
-        subname = None
-        subrex = re.compile('^[^\*]*[ \t]*.subckt[ \t]+([^ \t]+).*$', re.IGNORECASE)
-        dutlines = spitext.replace('\n+', ' ').splitlines()
-        for line in dutlines:
-            lmatch = subrex.match(line)
-            if lmatch:
-                subname = lmatch.group(1)
-                if subname == layoutcell:
-                    is_subckt = True
-                    break
-
-        if is_subckt:
-            layout_arg = self.layout + ' ' + layoutcell
-            layout_text = '"' + layout_arg + '"'
-        elif subname:
-            layout_arg = self.layout + ' ' + subname
-            layout_text = '"' + layout_arg + '"'
-        else:
-            layout_arg = layout_path
-            layout_text = layout_arg
-
-        if has_vlog:
-            schem_arg = vlog_path + ' ' + self.schematic
-        else:
-            # Final checks
-            if not os.path.isfile(net_path):
-                print('Error:  No netlist from schematic.')
-                return
-
-            with open(net_path) as ifile:
-                spitext = ifile.read()
-
-            # Check the netlist to see if the cell to match is a subcircuit.  If
-            # not, then assume it is the top level.
-
-            schemcell = os.path.splitext(os.path.split(self.schematic)[1])[0]
-            subname = None
-            is_subckt = False
-            subrex = re.compile('^[^\*]*[ \t]*.subckt[ \t]+([^ \t]+).*$', re.IGNORECASE)
-            dutlines = spitext.replace('\n+', ' ').splitlines()
-            for line in dutlines:
-                lmatch = subrex.match(line)
-                if lmatch:
-                    subname = lmatch.group(1)
-                    if subname == schemcell:
-                        is_subckt = True
-                        break
-
-            if is_subckt:
-                schem_arg = self.schematic + ' ' + schemcell
-                schem_text = '"' + schem_arg + '"'
-            elif subname:
-                schem_arg = self.schematic + ' ' + subname
-                schem_text = '"' + schem_arg + '"'
-            else:
-                schem_arg = net_path
-                schem_text = schem_arg
-
-        # Remove any previous comparison output file
-        comp_out_path = os.path.splitext(comp_path)[0] + '.out'
-        if os.path.exists(comp_out_path):
-            os.remove(comp_out_path)
-
-        # Run netgen as subprocess
-        print('Running: netgen -batch lvs ' + layout_text + 
-		' ' + schem_text + ' ' + self.lvs_setup + ' ' + comp_out_path +
-		' -json -blackbox')
-        # Note: Because arguments to subprocess are list items, the {filename cell}
-        # pair does *not* have to be quoted or braced.  Doing so causes a parse
-        # error.
-        self.lvsproc = subprocess.Popen(['netgen', '-batch', 'lvs',
-		layout_arg, schem_arg,
-		self.lvs_setup, comp_out_path, '-json', '-blackbox'],
-		cwd=comp_dir,
-		stdout=subprocess.PIPE, stderr=subprocess.PIPE, bufsize=0)
-        # This is largely unnecessary as netgen usually runs to completion very quickly.
-        self.watchclock(comp_path)
-
-    def watchclock(self, filename):
-        if self.lvsproc == None:
-            return
-
-        lvs_status = self.lvsproc.poll()
-        sresult = select.select([self.lvsproc.stdout, self.lvsproc.stderr], [], [], 0)[0]
-        if self.lvsproc.stdout in sresult:
-            outstring = self.lvsproc.stdout.readline().decode().strip()
-            self.logprint(outstring, doflush=True)
-            print(outstring)
-        elif self.lvsproc.stderr in sresult:
-            errstring = self.lvsproc.stderr.readline().decode().strip()
-            self.logprint(errstring, doflush = True)
-            print(errstring, file=sys.stderr)
-
-        if lvs_status != None:
-            print("netgen LVS exited with status " + str(lvs_status))
-            self.lvsproc = None
-            if lvs_status != 0:
-                print('Errors encountered in LVS.')
-                self.logprint('Errors in LVS, lvs status = ' + str(lvs_status), doflush=True)
-            # Done;  now read comp.json and fill the treeview listbox.
-            self.generate(filename)
-        else:
-            self.after(500, lambda: self.watchclock(filename))
-
-    # Generate display from "comp.out" file (json file now preferred)
-
-    def generate_orig(self, lvspath):
-        lefttext = []
-        righttext = []
-        print("Reading LVS output file " + lvspath)
-        if os.path.exists(lvspath):
-            with open(lvspath, 'r') as ifile:
-                lvslines = ifile.read().splitlines()
-            for line in lvslines:
-                if '|' in line:
-                    # parts = line.split('|')
-                    # lefttext.append(parts[0])
-                    # righttext.append(parts[1])
-                    lefttext.append(line[0:42].strip())
-                    righttext.append(line[44:].strip())
-                else:
-                    lefttext.append(line)
-                    righttext.append('')
-            # Populate treeview with text
-            self.toppane.lvsreport.repopulate(lefttext, righttext)
- 
-        else:
-            print("Error:  No output file generated from LVS.")
-
-    # Generate output from LVS report JSON file comp.json
-
-    def generate(self, lvspath):
-        lefttext = []
-        righttext = []
-        print("Reading LVS output file " + lvspath)
-        if os.path.exists(lvspath):
-            with open(lvspath, 'r') as ifile:
-                self.lvsdata = json.load(ifile)
-
-            # Populate treeview with text
-            self.toppane.lvsreport.json_repopulate(self.lvsdata)
- 
-        else:
-            print("Error:  No output file generated from LVS.")
-
-    def findrecord(self, value):
-        print("Unimplemented function")
-
-    def findrecord_test(self, value):
-        # Check if socket is defined;  if not, attempt to open one
-        if not self.msock:
-            try:
-                self.msock = socket.socket(socket.AF_INET, socket.SOCK_STREAM)
-            except:
-                 print("No response from layout tool.")
-
-            if self.msock:
-                self.msock.connect(("0.0.0.0", 12946))
-                self.msock.setblocking(False)
-        if self.msock:
-            # Pull name of net or device from 'value'
-            # This is a test:
-            self.msock.sendall(b'box 0 0 100 100\r\n')
-
-if __name__ == '__main__':
-    options = []
-    arguments = []
-    for item in sys.argv[1:]:
-        if item.find('-', 0) == 0:
-            options.append(item)
-        else:
-            arguments.append(item)
-
-    root = tkinter.Tk()
-    app = LVSManager(root)
-    if arguments:
-        if len(arguments) >= 2:
-            app.set_project(arguments[0], project_name=arguments[1])
-        else:
-            app.set_project(arguments[0])
-
-    root.mainloop()

tcltk/netgen.tcl.in

@@ -562,12 +562,13 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
             if {[netgen::print queue] != {}} {
 	       if {([lsearch $noflat [lindex $endval 0]] == -1) &&
 			([lsearch $noflat [lindex $endval 1]] == -1)} {
-	           netgen::log put "  Flattening non-matched subcircuits $endval"
+	           netgen::log put "  Flattening non-matched subcircuits $endval\n"
 	           netgen::flatten class "[lindex $endval 0] $fnum1"
 	           netgen::flatten class "[lindex $endval 1] $fnum2"
 	       } else {
-	           netgen::log put "  Continuing with black-boxed subcircuits $endval"
-		   lappend matcherr [lindex $endval 0]
+	           netgen::log put "  Continuing with black-boxed subcircuits $endval\n"
+		   lappend matcherr [lindex $endval 0]"(1)"
+		   lappend matcherr [lindex $endval 1]"(2)"
 	           # Match pins
                    netgen::log echo off
 	           if {$dolist == 1} {
@@ -609,16 +610,15 @@ proc netgen::lvs { name1 name2 {setupfile setup.tcl} {logfile comp.out} args} {
       } else {
 	 # Flatten the non-matching subcircuit (but not the top-level cells)
          if {[netgen::print queue] != {}} {
-	    if {([lsearch $noflat [lindex $endval 1]] == -1) &&
+	    if {([lsearch $noflat [lindex $endval 0]] == -1) &&
 		    ([lsearch $noflat [lindex $endval 1]] == -1)} {
-	       netgen::log put "  Flattening non-matched subcircuits $endval"
+	       netgen::log put "  Flattening non-matched subcircuits $endval\n"
 	       netgen::flatten class "[lindex $endval 0] $fnum1"
 	       netgen::flatten class "[lindex $endval 1] $fnum2"
 	    } else {
-	       netgen::log put "  Continuing with black-boxed subcircuits $endval"
-	       lappend matcherr [lindex $endval 0]
-	       netgen::log put "  Continuing with black-boxed subcircuits $endval"
-	       lappend matcherr [lindex $endval 0]
+	       netgen::log put "  Continuing with black-boxed subcircuits $endval\n"
+	       lappend matcherr [lindex $endval 0]"(1)"
+	       lappend matcherr [lindex $endval 1]"(2)"
 	       # Match pins
                netgen::log echo off
 	       if {$dolist == 1} {