that are not declared in the verilog netlist because they don't
connect to anything, and their presence is not required by verilog
syntax) and the printing of proxy pins created to act as placeholders
for those implicit pins. Also removed the pinting of the "disconnected
pin" messages for black-box modules (since by definition they have
disconnected pins, because black-box modules have no contents).
black-box circuits, especially those coming from verilog netlists
where a pin does not need to be declared and is implicitly floating.
This prevents the need to have an explicit black-box entry for any
verilog module that may have an instance that does not declare all
the pin connections. Also corrected an error which causes mysterious
failures if a verilog netlist is read before a SPICE netlist,
because the former gets hashed case-sensitive and the latter changes
the hashing to case-insensitive. Modified to force the SPICE
netlist to be treated case-sensitive, which may cause errors, but
is consistent with the reverse order handling, and doesn't cause
unexplained errors.
symmetry of all elements in all symmetric partitions, rather than
(as previously done) all elements in each partition, before re-
running iterations to convergence. This solves the problem of
having a very large number of partitions with a few elements each
taking a long time to run.
automorphisms so that it arbitrarily assigns all pairs from
circuit1 and circuit2 at once rather than assigning one pair at
a time and rerunning to convergence. I'm not sure of the validity
of this, other than that I have never seen a circuit fail to match
after resolving automorphisms, leading me to believe that the way
the symmetry breaking is done is irrelevant.
long run-times even when there are no properties to check. Corrected
a problem with SPICE and verilog netlist reading which arbitrarily
replaces file extensions even when a file extension is given,
resulting in reading the wrong file.
to include type CLASS_MODULE in the list of types to descend into,
since "module" (black-box) types need to be checked for pin
matching even if they have no contents. This allows two verilog
netlists to be compared against each other.
definitions: Now correctly parses everything from the definition
name to the end of line as the definition value. Also: The
search for definitions in the body of the text does not reject
non-alphanumerics "_" and "$" in the definition name, without
which definition names containing those characters will go
unrecongized. Have not yet extended this to multi-line definition
values.
of the root name of the LHS net, and so would use the last root
name copied, which might have belonged to something entirely
different, or nothing at all.
scan structure because it is used in two different places and
would have to run a cost-prohibitive search of the cell's
object list. Also, was missing recording a bus input/output
signal from an "input" or "output" statement (as opposed to
in-line signals in the I/O list).
to bus pins over an array of instances. Takes care of the three
situations where the length of the signal bus equals the number of
instances; where the length of the signal bus is a multiple of
the number of instances; and where the number of instances is a
multiple of the length of the signal bus.
from 200 to 1024. Probably this should be dynamically allocated
and expanded as needed, as it is holding names that are of
increasing length as a hierarchy is descended and the instance
prefixes appended to the name.
However, I have identified an issue that has not yet been resolved,
which is that there can be automorphisms that are potentially
broken by property matching. Currently, the automorphisms are
arbitrarily resolved, then properties are matched---and may fail
accordingly.
in an "include" statement in either SPICE or verilog. Modified pin
matching behavior to force cells in both netlists to be marked as
black-box entries if either one is marked as a black-box entry (this
may not be needed, but shouldn't do any harm, either).
be removed because they do not match pins on the other cell being
compared, are marked with a different number (-2) than the usual
(-1). CleanupPins then only removes those pins that are marked,
rather than all disconnected pins.
<col2_width>" to set the output format width, to avoid the fixed column
widths of 41 characters which can truncate long strings in the output
such as deep cell hierarchies. This command can be placed in the setup
script to widen the output columns to accomodate the result (to-do:
provide an "auto" mode to automatically determine the best width).
with increment/decrement syntax at the end. Also the parser now
handles additional keywords associated with behavioral verilog
(initial, specify) and flags modules with them as black-box entries.
that affects vectors sliced across instance arrays. Can cause vector
numbers to be out-of-bounds if an instance is arrayed but each
instance is listed separately.
inline-I/O syntax with "wire" (e.g., "input wire [3:0] test")
and addressed the failure to add buses declared in inline I/O
to the list of known buses.
verilog parser. The parser should now be able to handle any
conditionals anywhere in the verilog code. Also a bug was found
in the code that handles "a = b" assignments, and corrected.
code using the backtick expression. Also expanded the parsing of
"ifdef", "ifndef", and "endif" to include "elsif" and "else". All
forms of "if" statements should now be handled, since verilog does
not define boolean expressions in ifdef operators like most languages
do.
SPICE and verilog, in spite of the syntactical differences, to
account for the trick that qflow uses to replace the trailing space
in a verilog backslash-escaped name with a second backslash to get
a SPICE-compatible name that can be easily converted back to its
original verilog name without loss of information. What this means
is that verilog can read SPICE files containing verilog names (which
is illegal SPICE) and verilog files containing hacked-backslash
names (which is illegal verilog). This should be mostly harmless
although the wisdom of it is surely questionable.
assignment statements in verilog netlists, including assignment of
signal bundles. Also corrected handling of signal bundles in pin
connections, which had been corrected in qflow's verilog parser but
not copied back to netgen. Note that the syntax for signals multiplied
N times is still not handled.
a "critical property". This lets a device define multiple critical
properties, all of which must match before additive properties can
be combined in the same device.
re-worked property command, "critical" properties must match
across devices so that all other properties can be combined as
specified (addition, parallel combination, or none). The code was
still based on the older notion of the "critical" property being
the one to add (and thus preventing multiple properties from being
added in different ways). This has now been fixed.
handle verilog syntax. Also: Added SPICE voltage and current
sources as separate classes (as opposed to being converted to
subcircuits, which was how they were previously handled). That
allowed voltage sources to be checked for zero value and removed
by shorting the ends together, as was being done for zero value
resistors (note that like zero-value resistors, removal is only
done if removing the component makes a better match than leaving
it in). In particular, yosys has SPICE netlist output that
converts equality assignments ("assign a = b") into zero-value
voltage sources, so these components need to be treated as
non-physical elements.
the possibility that a device (e.g., resistor or capacitor) may
not be a semiconductor device (in other words, a parasitic or
ideal device), and therefore uses "value" but not width and
length, and therefore "value" is a critical property to merge
both in series and parallel. Corrected the series/parallel
network optimization to prevent it from setting both M and S
records > 1 on the same device (which is ambiguous). To try
to get number of devices to match, where there are both series
and parallel devices, they will be merged across the critical
property early (before property matching).
accidentally erasing array delimiters from node names, a move that
surprisingly has no effect at all on LVS until the cell containing
the truncated nodes is flattened, at which point it causes odd and
confusing behavior that seems to have nothing to do with node names
at all.
Tim Edwards