support of devices with terminals on different plances, such as
capacitors, diodes, and bipolar transistors. Output now appears
to give meaningful results for flattened layouts, although
numerous issues remain for hierarchical layouts.
to be scaled twice when using the "extract style" command and with an
extraction style that uses micron units. The microns-to-internal
units conversion expects an unscaled result when calling
CIFGetOutputScale(), but except when loading a tech file for the
first time, this value is scaled, and causes the double scaling.
Fixed by unscaling the CIF output before reloading the extraction
style, then scaling it afterward.
to copy up errors from non-interacting subcells. The routine was
only copying up TT_ERROR_P type errors, but for deep hierarchies,
TT_ERROR_S type errors may have to be propagated up as well.
require that an edit cell be defined. This stops a lot of commands
from failing on non-writeable cells. There really should not be a
concept of "non-editable" cells at all, just non-writeable ones.
"|"), pointed out by Jim Everitt. The error is pretty major, but
because the section of code it affects is just eliminating
unnecessary DRC rules, I believe that the only effect is that the
DRC ruleset ends up using more memory than it needs to. But, good
to have fixed.
it is easy to subvert the process by updating GDS without updating
the pointers, it is trivial to end up with bad GDS output. The
sanity checks confirm that the position pointed to is a complete
structure (check begin and end records), and that it has the same
name as the cell (this is not a requirement, as there are reasons
one might want to point to data from a structure of a different
name, but a warning will be printed).
that can be used to force renaming of a read-only cell. The
action revokes the read-only status of the cell and removes any
GDS filename and pointers from the cell's properties. This can be
used to swap out a library cell in a layout for a custom version,
by first forcing a rename of the cell, and then resetting the
filepath of the cell and flushing.
tile corners in the check area to find areas needing bridges.
This prevents generation of unnecessary bridging geometry; and
since the error made the check rotation-dependent, this may
resolve some "parent and child disagree on CIF" errors.
necessarily a 1:1 correspondence from tile types to extracted
device names, and not necessarily a 1:1 correspondence in the other
direction, either. So the search for devices at the location given
by the .sim file has been loosened to look for any tile type at that
location. Matches are restricted to those in which the plane of the
type found is the same as the plane of the device recorded in the .sim
file; this prevents matching device like MiM caps that may be in the
same location as a device in another plane.
very long time but never discovered; in which any implicit port
connection into a subcell (that is otherwise labeled with ports) that
appears at the end of the node list (i.e., after all the declared
ports), will not be output, either in the subcircuit definition or
calls.
presented on the command line, then all following arguments are
assumed to be arguments of the script and not additional input
to be processed by magic. This allows arguments to be passed to
scripts passed to magic on the command line.
is not necessary that the target cell not exist. That allows a
layout to be flattened into a destination in pieces. Also found
that the "flatten" command never frees memory for the CellUse it
creates for the copy, so fixed that as well.
introduced: The use of substitutions for PDKPATH and home directory
in path names for GDS files referenced in abstract views, and the
"gds addendum" option. Both were interfering with magic's handling
of writing GDS files from abstract layout views.
from 98 (arbitrarily selected) to 61 (apparently commonly used by
other tools). This should help increase compatibility with GDS
files output from other tools.
were incorrect assumptions made in the code from 35 years back or so,
for the case where the CIF layer halo is larger than the size/separation
of the cells in the array. The new code will prevent the array routine
from copying hierarchical additions to the mask layers outside of the
array area. Whether or not the new code has its own faulty assumptions
remains to be seen through thorough vetting.
the last commit, unfortunately. Thanks to Matt Guthaus for alerting me
to this. Also updated parts of the extresist code that remove the
dependence on ResConDCS; this is a minor update and should not affect
the operation of extresist. It is preparatory to doing more work to
support additional device types like capacitors, bipolars, and diodes.
the layers2->layers1 swapped case from being implemented; the
surround_ok rule type is by definition asymmetric and the two
layer sets cannot just be swapped.
for loading a cell after displaying an unmodified "(UNNAMED)" cell,
because "(UNNAMED)" will be deleted, leaving the undo record
invalid and causing a crash if it is attempted to be invoked.
recursive loop and crash magic. Corrected a number of other issues
along the way, especially one where routines in EFantenna and extresist
make use of array EFDevTypes which was only created by ext2sim and
ext2spice, and freed when done. Having run extresist through valgrind,
there are still issues in the code.
on loading a layout to avoid doing so with in a suspendall ...
resumeall block. That avoids weird errors occurring when the
PDK toolkit scripts are run to generate a new device layout if
the top level layout is still (UNNAMED) and empty.
checks on non-Manhattan tiles were made only on the straight edges;
this was sufficient for most checks. However, it can miss the case
of facing non-Manhattan edges. This check does not do triggered
rules because there is no non-Manhattan maxwidth algorithm implemented,
and because the triggering clipping area is a triangle and needs an
extension to support it.
area + halo but then failing to limit overlap checks to that clip
area, resulting in bizarre errors whenever an array is made. Not
sure why the error didn't show up more often.
in which if a cell is read from GDS that has the same name as a cell
in memory, then the cell in memory is renamed to keep all cell names
unique in the database.
for sticky labels making connections through the hierarchy. This
is only needed for some annoying layouts that put point-size labels
with no connecting geometry in cells, and causes magic to spent
excessive amounts of time searching through labels for any layout
that has lots of labels.
and HOME substitution in filenames needs to watch for a NULL
cd_file, and (2) The routine that removes the (UNNAMED) cell when
another cell is loaded needs to NULL the boxRootDef pointer or else
it ends up pointing to deallocated memory.
This can be done now by reading a LEF file, followed by reading
a GDS file with the "noduplicates" option set. In addition,
annotation of either the LEF view or a read-only view follows the
same protocol as cell paths in the .mag file, which is to replace
leading path components matching Tcl variables for PDKPATH or
PDKROOT, and replace the home directory path with a tilde.
commit, mostly relating to the scale of values in the ".nodes" file
produced by ext2sim. Making this file CIF syntax seemed unnecessary,
so I removed the CIF syntax and scaling. "extresist" can now produce
an apparently valid output on a standard cell layout. Even with the
change, the extresist output is still only pseudo-hierarchical, so
this does not preclude the need for eliminating the .sim format file
in favor of the .ext file, but it provides a working intermediate
form.
so that it returns cellnames in "natural sort" alphabetical order
instead of the random order produced by scanning the hash table
of cell names. Since this command is used by the "cell manager"
window code, which was also not doing any sorting, then this fixes
the same issue in the "cell manager".
original view position; this was due to not setting units to
internal before re-applying the previous view position. Also wrapped
most of the "popstack" routine into a suspendall...resumeall block so
that the view is refreshed only once; this is especially important
when popping back into a full chip view.
with the existing documentation) by not requiring the net containing
the two labels to be selected before running the "select short" command.
The command now first checks if the labels exist in the selection, and
if not, the command effectively executes "goto label1 ; select net" and
then continues as previously implemented.
that contain the selected paint. Previously, all cells inside the
area of the selection box would be printed, which is completely
wrong, and can lead unexpectedly to thousands of cell instance
names being printed out.
statement in a .ext file require that all aliases of a node name be
rehashed after a node merge, or else node loops can occur. Also
prevented statements of the form "equiv A A" from being output in
the .ext file, as they are useless.
However, this has not been implemented as it has been observed that
the use of itimer() has a restriction of one timer per process, which
interferes with the three or more uses of the timer within magic. The
timer method will have to be changed to use the POSIX timer_create()
routine, before this will work properly.
extra option "-default" that allows defaults to be set for any
label property other than text or port-related properties.
Subsequently, the command "label <text>" will apply the given
defaults to the label. This allows a simpler way to create
rendered labels from the command line without remembering all of
the arguments to the extended "label" command.
conversion, largely converted from the python script in open_pdks,
which itself was derived from an efabless script, and none of
which have been particularly well tested.
characters. Instead of removing the non-alphanumeric characters, magic
now prepends an "x" to the name. Since this naming restriction does not
necessarily impact, say, LVS, it would probably be better to let this
behavior be enabled or disabled by a command.
The previous behavior was to generate hierarchical names for all
labels when copying contents of subcells. This is "safe" for
copying selections without accidentally shorting things through
labeling, but it can make a mess of the selection. Options are
now "select do labels" for the existing behavior, "select no labels"
to not show any labels, and "select simple labels" to show only the
root name of labels in subcells.
based on the contents of a .mag file being read in, assuming
compatibility with principles of open_pdks. The search paths
are not meddled with unless a file is read for which the technology
cannot be found (and a technology has not already been read, or at
least no database file exists in memory using any technology that
has already been read). If so, then variables PDK_PATH and PDK_ROOT
are searched for in both the shell environment and the local Tcl
environment. Also, if open_pdks has installed PDKs in the path
/usr/share/pdk/, then that path will be searched. If a corresponding
technology file is found, it will be loaded. If the path corresponds
to an open_pdks-style path, then the library paths in libs.ref will
also be added to the search paths for cells.
to get the pixel size of the default font, and scale the window
glyphs and scrollbars to match, so that the display is automatically
adjusted for screen resolution and does not require manual intervention
to correct for high resolution displays.
of an instance with double-escaped brackets if the instance name
contains brackets. This then undermines the use of the backslash
escape and causes the interpreter to raise an error instead of
printing the name.
it as a single value "flags" (unsigned char) with meaningful flag
names. Added new option "-fail" to the load command to allow
magic to fail on loading a cell that does not have a corresponding
file rather than the default action of creating a new cell. Added
a flag for the "-quiet" option so that behavior on "-fail" can be
done quietly.
"bridge" GDS output operator; the previous equations were, under
some situations, failing to meet the width requirement. Also:
corrected the "cif style" check so that it does not claim that a
style name with an exact match is ambiguous. Also: Corrected the
use of "grid limit", so that the limit correctly scales with the
output expander value.
cell def that is marked for a "full dump" from a referenced GDS
file. This change was supposed to have been done a few commits
ago but did not work as advertised.
asymmetric MOSFET definitions in the tech file "extract" section.
Corrected the nmos.tech.in file to put the resistance classes in
plane order, as otherwise the interpretation of which resistance
classes belongs to the transistor source and drain can get messed
up by the presence of buried contacts.
magic database derived layout of a cell that declares GDS_FILE
but for which the GDS file referenced cannot be found or read.
This will produce an incomplete GDS file instead of an apparently
good and complete GDS file that actually contains bad data. Also:
Added new command "random" that allows a random seed to be set,
for use with the GDS output when writing a full dump of a GDS
file. Otherwise, the output prefixes are always the same, which
defeats the purpose of adding the random prefix.
significant amounts of time even though there is no display to
receive the result. However, the "suspendall" command only works
if a window exists. The obvious solution is to set GrDisplayStatus
to DISPLAY_SUSPEND whenever magic is run with the "-dnull" option.
This should help speed up a lot of scripts, in particular where
designs are large.
restricted to its original intent, which is to replace the long name
formed from the plane short name and the "minfinity" coordinate.
This avoids issues with conflicting substrate names derived from a
real layer such as pwell. Also, the global substrate node name now
returns the variable name without the "$" in front if the variable
has not been set to anything. This avoids potential syntax errors
in the netlist.
Tim Edwards