This patch adds support for emitting fixed CA selects (zero based
variable bit and array selects also work), emitting a for statement
as a single statement and fixes for numerous little bugs. It also
adds the start of emitting module port information.
This patch adds some preliminary module port information to the ivl
interface. This may change as I investigate exactly what is needed.
It also fixes a few minor bugs (a missed local variable and spacing)
This patch adds a trace command to the interactive prompt that can be
used to control statement tracing when the code is instrumented (has
%file_line opcodes).
A valarray of an enum does not initialize to 0 so explicitly specify the
value to fill the array with. This was causing the compiler to incorrectly
report that fixed width elements in a concatenation had no size.
The following was done to remove compiler warning when using the native
compiler on OpenSolaris.
Remove the anonymous unions in tgt-vlog95/stmt.c and tgt-vvp/vvp_process.c.
Use UINT_MAX for the maximum unsigned unsigned instead of -1 in
tgt-vvp/draw_net_input.c.
Even though lex defines yywrap() to have no arguments when %option
noyywrp is used it generates a define that takes an argument that is not
used. The compiler warned about this so remove the option and add a
dummy yywrap function.
This patch adds a check on the expression type before adjusting an
unsized expression width up to integer_width. This adjustment should
only be performed for vectorable expressions.
The patch also fixes a few compiler warnings that only show up on
32-bit builds.
This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
The 1364-1995 version of Verilog does not support non zero based
parameters. This patch removes the comment requesting the parameter
MSB/LSB information to denormalize the expression and replaces it
with one stating that we need to keep the compiler normalization.
This patch removes the code that was deleting the signals in an L-value
concat if the concatenation failed to elaborate. This is incorrect since
the signal could be used in another context that is processed later. The
error message when an output/inout port fails to elaborate was also
improved to give the expression that is connected to the port.
This patch adds the rest of the functionality needed to correctly
emit both L-value and R-value procedural variable indexed part
selects as a concatenation of variable bit selects.
This patch modifies the compiler and the ivl interface to pass the
type of indexed part select that is being represented (up/down) in
a procedural L-value or R-value. This is needed by any back end that
wants to correctly denormalize the (zero based) base expression.
This patch adds support to the compiler/ivl interface for getting the
original UDP definition port names. ivl_udp_port() was added to get
this information.
This patch adds partial support of procedural variable indexed part
selects (both R and L-value). The restriction is that this currently
only works on a zero based little endian vector. I need to know if
the select is an up or down select to correctly denormalize the base
expression for the general case.
This patch adds copyright information for the Icarus generated UDPs
(lesser GPL version 2.1). It also prints a note to let the user know
that this copyrighted code is being included in the output file. They
can then remove the primitives if needed. These are likely only
needed when the output is from synthesis. At the moment we only have
a positive edge D-FF. In the future a negative edge FF and D latches
will also be needed.
Add a preliminary gate name and range (zero based) for logic primitives.
Also assert that a logic gate in a continuous assignment has the correct
number of inputs/outputs.
This patch adds code to emit variable real procedural delays by
removing the scaling that is added by the compiler. It also
recognizes that all variable continuous assignment delays are
scaled at run time.
This patch reworks the delay emitting code to handle delay expressions
better. It also encloses the emitted unary operators in parenthesis to
make sequenced unary operators work properly.
It was incorrect to extend emit_expr_signal() to handle a local signal
(a continuous assignment). The only way this should ever happen is
when evaluating a variable delay expression. It is better to do this
checking in the delayx evaluation where we know if we are processing
a delay for a statement or a continuous assignment. This keeps the
emit_expr_signal() routine cleaner and we only allow a CA delay for
a continuous assignment.
This patch fixes the following bugs in the vlog95 converter:
When emitting a signal as an expression, if the signal is local then
emit the expression that is driving the local signal.
The casts need to emit the expression.
When emitting pull devices they have different default strength rules
(pull is the default).
For compatibility pull devices should only have a single output net.
Extend the code that searches for the <var> = <delay> <value> pattern
to also check for an <event>. The previous event code only looks for
the repeat event pattern.
This patch adds a flag that emits file and line information for
most lines. This can help the user understand where the various
lines came from in the original code. They are printed as
comments so the generated code still runs correctly.
This patch fixes a bunch of objects to have the correct file/line
information. It also adds support for getting file/line information
for events (named events have a definition line).
When emitting a logical device as part of a continuous assignment
we need to use the actual inputs (not the output). We also do not
need to emit anything if the nexus is NULL. Also skip logical gates
that have a local output since they are part of a continuous
assignment and the inputs to a logical gate can be an expression
so emit them as a continuous assignment.
This patch adds the following to the vlog95 converter.
Add support for emitting and calling UDPs.
Generate a UDP for a synthesized DFF.
Add the ability do emit a constant assigned to a net.
This patch adds/fixes the following:
Adds file/line information to a UDP definition.
Prints an error message if a UDP is passed signals wider than 1 bit.
A UDP should supports a range, but the compiler currently does not.
Add scope information for constants.
Fix the Icarus extension UDP table entry element 'h' to use h.
The ivl_udp_init() value is a char not unsigned.
Add FILE_NAME() for a bunch more of the ivl interface objects.
This patch adds code that when it find a select of a constant it looks
for a parameter in the enclosing scope and the module scope that has
the same line, file and value information. If it find one that is
used to rebuild the expression. A more exhaustive search is need to
make this 100% clean.
It also uses the named scope when emitting statement inside a named
begin or fork instead of the enclosing scope.
This patch moves the logic and lpm code to a new file. It refactors
the strength emitting routine and adds support for emitting the
standard tran style of gates.
This patch adds the ability to translate the code produced by the
compiler for a wait statement back into a wait statement. It also
reworks the strength emitting code to only emit a single strength
for the pull gates and fixes a bug in the strength emitting code.
Currently the vvp target emits multiple single bit %mov instructions
to perform sign extension. This patch adds a new %pad instruction
that allows sign extension to be performed with just one instruction.
A NOOP at the end of an existing statement can be represented as ";\n"
(a simple line termination). In general a NOOP represents an empty
begin/end pair.
This patch add the following functionality to the vlog95 generator.
Add support for most CAs. Selects still don't work correctly.
Emitting a named event as an expression.
Enhance the ability to find a signal in a nexus.
Add code to emit a nexus driven by a constant.
Rework the delay/strength code for logic gates/CAs
Refactor some of the number code.
Refactor the variable emitting code to support named blocks.
Translate the compiler code back to <var> = <event> <value>
Cary R
Nick Gasson
Martin Whitaker
Stephen Williams
Pawel Szostek