This patch adds support for tracing procedural statement execution in vvp.
This is accomplished by adding a new opcode that is inserted before the
code that represents a procedural statement. These opcodes also trigger
a message whenever time advances. By default these opcodes are not added.
To add them, pass the -pfileline=1 flag to the compiler. In the future we
may add support for turning the debug output on and off once the opcodes
have been added with a system task or from the interactive prompt.
Currently the vvp target emits multiple single bit %mov instructions
to perform sign extension. This patch adds a new %pad instruction
that allows sign extension to be performed with just one instruction.
In combination with the patch to make all operations on thread words
operate on 64-bit values, this patch ensures casts between real values
and large vector values work correctly.
The vvp thread word storage had previously been changed to always store
64-bit values, but some instructions still only operate on native long
values. This patch ensures all instructions that modify thread words
support 64-bit values.
These opcodes need to return 'bx or 0.0 for the real opcode when
the array index is undefined.
The patch also documents the auto incrementing of the bit
index register done by the %load/avx.p opcode.
The %shiftr/i0 and %shiftl/i0 opcodes are used for some part
selects and if we have a negative shift we want the value to be
padded with 'bx. This patch enhances the two %shift/i0 opcodes
to work with negative shifts and for negative shifts pad with
'bx instead of 'b0.
It also fixes %ix/get/s to use a uint64_t instead of a unsigned
long to avoid problems with sign extension on 32 bit machines.
This patch adds support for 64 bit non-blocking delays in procedural
code. We fixed the procedural delay operator (blocking delays) earlier.
This patch mostly mimics what was done there. The continuous assignment
delay operator still needs to be fixed.
This patch adds the procedural power function %pow/s for signed
values. This has bit based inputs and outputs, but uses the double
pow() function to calculate the value.
Support arrays of realtime variable arrays and net arrays. This
involved a simple fix to the ivl core parser, proper support in
the code generator, and rework the runtime support in vvp.
Since some event control assignments can be skipped we need an
event control clear so that future %evctl statements do not fail
their assert. This patch adds %evctl/c and uses it in the compiler
as appropriate to keep the event control information in sync.
This patch adds full event control for vectors and parts of a
vector. It also fixes the other non-blocking part select code
to correctly handle a negative offset ([1:-2] of a [4:0] will
have an offset of -2).
This patch pushes the non-blocking event control information to
the code generator. It adds the %evctl statements that are used
to put the event control information into the special thread
event control registers. The signed version (%evctl/s) required
the implementation of %ix/getv/s to load a signed value into
an index register. It then adds %assign/wr/e event control based
non-blocking assignment for real values. It also fixes the other
non-blocking real assignments to use Transport instead of inertial
delays.
Nothing to do with tab width! Eliminates useless
trailing spaces and tabs, and nearly all <space><tab>
pairings. No change to derived files (e.g., .vvp),
non-master files (e.g., lxt2_write.c) or the new tgt-vhdl
directory.
Low priority, simple entropy reduction. Please apply
unless it deletes some steganographic content you want
to keep.
The load-and-add for vectors %load/vp0/s can be combined with the
load-and-add for array words, and the %load/avp0/s added to round
out the combinations. This can make for fewer instructions when
words are padded in arithmetic expressions.
The %load/vp0 instruction adds a signed value to the signal value being
loaded, but it doesn't allow for a signed source vector. Add the
%load/vp0/s instruction that pads the loaded vector, and add the code
generator details to properly use it.
The part select of a vector is converted by the compiler during
elaboration to a 0-based canonical address. But since it is legal
to address bits below the LSB, the canonical address can be negative.
So make the part select base for selecting from signals work with
signed arithmetic and make the code generator generate negative
indices when needed.
The memory opcodes %assign/mv, %load/mv and %set/mv
were removed by a previous patch. This one removes
the documentation from opcodes.txt. It also removes
the documentation for the .mem* statements for the
same reason.
Clarify that operands are typically 32bits, and have the code generator
make better use of this.
Also improve the %movi implementation to work well with marger vectors.
Add the %andi instruction to use immediate operands.
The abs() function needs to be able to turn -0.0 into 0.0. This proved
to be too clunky (and perhaps impossible) to do with tests and jumps,
so add an %abs/wr opcode to do it using fabs().
The min/max functions need to take special care with the handling
of NaN operands. These matter, so generate the extra code to handle
them.
This patch adds the ability to assign/deassign a bit or part select.
It also cleans up the code and fixes some problem in the forcing of
strength aware nets.
This patch adds a %assign/av/d opcode. This is a version of %assign/av
that allows a delay expression. Ultimately this allows a dynamically
indexed array to have a delay expression (non-constant delay value).
This patch adds functionality to do a bit or part select release
when a constant value is forced to the net/register. It also adds an
error message when the user tries to force a signal to a bit/part
select. This is not currently handled by the run time, so is now
caught in the compiler (tgt-vvp). Where when this functionality is
needed, it will be easy to know what to do instead of trying to track
down some odd runtime functionality.
What this all means is that you can force a signal to an entire
signal or you can force a constant to any part of a signal (bit,
part or entire) and release any of the above. Technically the
release of a constant value does not have to match the force.
The runtime verifies that if you are releasing a signal driver
it is being done as a full release. I don't see an easy way to
check this in the compiler.
To fix the signal deficiencies we need to rework the force_link
code to allow multiple drivers and partial unlinking. Much of
this is in the runtime, but the %force/link operator may also
need to be changed like I did to the %release opcode.
This patch reworks much of the ternary code to short circuit when
possible and supports real values better. It adds a blend operator
for real values that returns 0.0 when the values differ and the value
when they match. This deviates slightly from the standard which
specifies that the value for reals is always 0.0 when the conditional
is 'bx. There are also a couple bug fixes.
These fixes have not been ported to continuous assignments yet.
Ternary operators used at compile time and in procedural assignments
should be complete (short circuit and support real values).
draw_number_bool64() in tgt-vvp/eval_bool.c was using %ix/load to
load immediate values into registers greater than three. The problem
was that of_IX_LOAD() in vvp/vthread.cc was masking off the upper
bits. This was putting the results in the wrong register. This patch
removes the bit masking from of_IX_LOAD() and updates the %ix/load
documentation.
This patch adds bit based power support to normal expressions.
It also pushes the constant unsigned bit based calculation to
the runtime until the bit based method can be copied to the
compiler. Continuous assignments also need to use this type
of calculation.
This patch adds a new opcode %load/avp0 that is used to load a
word from an array and add a value to it. %load/vp0 was
changed/fixed to do the summation at the result width not the
vector width. This allows small vectors to index large arrays with
an offset. A few errors in the opcodes.txt file were also fixed.
When loading a part select from the least significant bits, it is
OK to use the %load/v instruction to strip the high bits off. This
allows the zero-based part select to work in one step, without
loading excess bits.
The %ix/getv instruction loads an integer register directly from
a signal vector. This is an optimization that an index register
is loaded from an expression is only a signal. It avoids the thread
vector space.
String values are known to be 2-value bits, so they are natural
candidates for using the movi instruction to load the value in
far fewer instructions. With this patch, up to 16bits (two bytes)
at a time can be loaded per instruction.
Signed-off-by: Stephen Williams <steve@icarus.com>
Implement compare-immediate instructions and generate code to use
these new instructions to improve runtime performance.
Signed-off-by: Stephen Williams <steve@icarus.com>
Cary R
Martin Whitaker
Stephen Williams
Martin Whitaker
Larry Doolittle
steve