This patch updates all the Makefile.in files and configure.in
as follows:
Do not use the -Wall warning flag when using the SunPro compiler.
The SunPro compiler uses -xMD instead of -MD.
There are still more fixes needed before Icarus will compile
on OpenSolaris.
The comparison and reduction operators only have a single output bit
that can be delayed.
The comparison of real values always produces a logical value so the
delay type is not dependent on the arguments type.
This patch cleans up some style issues: no need to check that a value
is defined before freeing or deleting it, use C++ style casts, make
sure to NULL terminate strncpy(), empty() is faster than size() for
size == 0 or size >= 0 checks, re-scope some variables, etc.
To match the behaviour of other simulators, delayed bit-based signals
should have the value 'x' and delayed real valued signals should have
the value 0.0 until the true initial value has propagated. This patch
provides this behaviour.
When building a modpath the source for the modpath must have the
same scope as the modpath. This is required to make the back
annotation work correctly (have the correct names).
This patch enhances elaboration to drop/ignore zero replication
count constants. Not doing this was causing problems later in
the compiler. We still pass non-constant expressions since
both user and system functions must be run for their possible
side effects. Constants can never have a side effect so just
dropping them is acceptable.
This patch adds support for passing the delay selection to vvp.
It adds a new header :ivl_delay_selection "<value>"; that has
the values TYPICAL, MINIMUM or MAXIMUM depending on the -T
flag to iverilog. This information is needed by $sdf_annotate
to select that appropriate value for a triplet when
"TOOL_CONTROL" is specified (default).
This patch mimics what was done for normal assignments to get the
width correct for nonblocking assignments when converting a real
r-value to a l-value vector.
When selecting bits from unsized literals, we do not put a limit
on the size of the literal, so there is no top above which we
stop getting literal bits.
When handling the $signed/$unsigned system functions, the compiler
was applying the new signed/unsigned property to the NetExpr object
representing the input argument. This caused the input argument to
be evaluated incorrectly. This patch fixes this by applying the new
property to the NetExpr object created to pad the result to the
required size.
In testing this fix, it was also discovered that the width of the
input argument expression was not being calculated correctly. This
patch also fixes this issue.
The padding for a signal select was using the signal to determine
if the padding should be singed or not. In reality this should be
unsigned padding unless the select was enclosed in a $signed().
In combination with the patch to make all operations on thread words
operate on 64-bit values, this patch ensures casts between real values
and large vector values work correctly.
When evaluating a function argument expression we need to use either
the expression width or the argument width which ever is larger. This
matches the way normal assignments work. We then only take the bits
needed at the end.
These explicit dependencies are not normally needed (because they
are covered by automatic dependency generation) but when the "-jN"
flag is passed to gmake, they help gmake schedule parallel builds.
(cherry picked from commit 5479aaf721)
Try to put all the version stamps into common version_base.h
and version_stamp.h header files. All the source programs then
get their version from these header files.
Also handle the version stamps in the man pages by using the
version_*.h header file contents to edit the version strings
in the man page title bar markers.
If a function in a continuous assignment is passed an array word as
an argument, syntactically incorrect vvp code is generated. This is
because the code calls draw_net_input to generate the input labels
part way through writing out the .ufunc statement. If an input is
an array word, draw_net_input causes a .array/port statement to be
emitted, which gets written out in the middle of the .ufunc statement.
This patch fixes the problem by collecting the necessary input labels
prior to starting writing the .ufunc statement.
The .delay (x,y,z) functor and the get_number_immediate() function
only supports 32 bit delay values. This patch adds an error message
if the user passes a larger, but valid value.
- Add missing dependency of configure on aclocal.m4.
- Remove config stamp files in make distclean (and fix another for
loop in base make distclean that I missed)
- Add stamp files to .gitignore
Use the time stamp file technique recommended by the autoconf manual
to prevent unneccesary rebuilds because of an unchanged config.h.
Uses the automake trick of generating the stamp files in the
_AC_AM_CONFIG_HEADER_HOOK macro instead of littering the source
directory with stamp-h.in files.
Add an extra ./config.status run after ./config.status --recheck
because with --recheck it doesn't actually try to remake the generated
files (and thus doesn't make the timestamp files). Thus without the
extra run, each stamp-*-h target would need to independently run
./config.status to make sure it wasn't changed by the configuration
change.
An orthogonal fix of how config.status is called in subdirectories.
When in a subdirectory and config.status is called with
../config.status and $(srcdir) is a relative path, config.status gets
confused. Fixed by replacing '../config.status --file=Makefile.in'
with 'cd ..; ./config.status --file=<dir>/Makefile.in'
Even open nets have a driver for HiZ. The BUFZ is needed as something
to hang .net objects. This is another step closer to not needing the
"create_constant_node" hack in vvp/words.cc.
In the olden days, the .alias was necessary to create a net name
that is an alias to an existing net in the netlist. But now that
the .net no longer creates a node in the netlist, ALL .net objects
are aliases of a sort, so this (mis)feature gets in the way.
The tranif input pins are normally nothing special, but sometimes
they are fed back from the switch body. In this case, the control
needs to see the current *output* from the fed back port, in order
to get the results that people expect.
Control inputs (i.e. the control input to tranif switches)
are not driven in any way by the island, so use .import records
instead of .port records to bring them into the island. Properly
handle the now potentially different bindings within the island
and outside the island. This means the draw_net_input_x function
is a little more sophisticated, and the node data more complex.
Local nets that have no (zero) drivers are dead weight. Since
they have no drivers, they are not being used anywhere. Since
they are local, they are not force-able.
This doesn't have any significant runtime consequence other then
to create a functor that is otherwise stable. But this does connect
to .net nodes more naturally, and gets me a step closer to banning
Cx<> labels as arguments to .net records.
If a signed signal is driving a part select in a CA and the width
is less than 32 bits. the value will be zero extended and will
not work for negative values. This patch adds a warning that this
could happen. This will be fixed in development.
This patch adds an optimization when a constant indexed part
select covers the entire L-value. It also fixes a few issues
in the code generator related to part selects.
In auto scopes, nets cannot work and probably are are artifact of
elaboration. So elide local nets in auto scopes.
Also, get net inputs from the inputs of nets. This is a step
towards eliminating the label on nets altogether.
This patch adds file and line number information to named events.
It also modifies the draw_eval_expr_wid() routine to fail with
an appropriate message for named events. This checking needs to
be pushed into the elaboration stage, but this will give a better
message than we had before.
It was documented that a IVL_LPM_CONCAT would use _size() instead
of _selects(). This patch adds the functionality to _size() and
converts all the Icarus provided code generators to use _size().
_select() will be kept for compatibility in V0.9.
This patch is a major rewrite of the indexed part selects (+: and -:).
It made the following enhancements:
1. Make indexed part selects work correctly with both big and little
endian vectors.
2. Add a warning flag that warns about constant out of bounds/or 'bx
indexed selects.
3. Moved the -: parameter code to its own routine.
4. Added support for straddling before part selects in a CA.
5. Added more assert(! number_is_unknown) statements.
6. Add warning for &PV<> select with a signed index signal that is
less than the width of an int. This will be fixed later.
7. Add support for loading a 'bx/'bz constant into a numeric register.
8. Add a number of signed value fixes to the compiler/code generator.
9. Major fix of draw_select_expr() in the code generator.
Cary R
Stephen Williams
Martin Whitaker
Jared Casper