This patch implements #6480. All loop statements are represented using
AstLoop and AstLoopTest.
This necessitates rework of the loop unroller to handle loops of
arbitrary form. To enable this, I have split the old unroller used for
'generate for' statements and moved it into V3Param, and subsequently
rewrote V3Unroll to handle the new representation. V3Unroll can now
unroll more complex loops, including with loop conditions containing
multiple variable references or inlined functions.
Handling the more generic code also requires some restrictions. If a
loop contains any of the following, it cannot be unrolled:
- A timing control that might suspend the loop
- A non-inlined call to a non-pure function
These constructs can change the values of variables in the loop, so are
generally not safe to unroll if they are present. (We could still unroll
if all the variables needed for unrolling are automatic, however we
don't do that right now.)
These restrictions seem ok in the benchmark suite, where the new
unroller can generally unroll many more loops than before.
Internals: Refactor generate construct Ast handling (#6280)
We introduce AstNodeGen, the common base class of AstGenBlock,
AstGenCase, AstGenFor, and AstGenIf, which together represent all SV
generate constructs. Subsequently remove AstNodeFor, AstNodeCase
(AstCase is now directly derived from AstNodeStmt) and adjust internals
to work on the new representation.
Output is identical modulo hashes do to changed AstNode type ids, no
functional change intended.
Step towards #6280.
The only use for the clocker attribute and the AstVar::isUsedClock that
is actually necessary today for correctness is to mark top level inputs
of --lib-create blocks as being (or driving) a clock signal. Correctness
of --lib-create (and hence hierarchical blocks) actually used to depend
on having the right optimizations eliminate intermediate clocks (e.g.:
V3Gate), when the top level port was not used directly in a sensitivity
list, or marking top level signals manually via --clk or the clocker
attribute. However V3Sched::partition already needs to trace through the
logic to figure out what signals might drive a sensitivity list, so it
can very easily mark all top level inputs as such.
In this patch we remove the AstVar::attrClocker and AstVar::isUsedClock
attributes, and replace them with AstVar::isPrimaryClock, automatically
set by V3Sched::partition. This eliminates all need for manual
annotation so we are deprecating the --clk/--no-clk options and the
clocker/no_clocker attributes.
This also eliminates the opportunity for any further mis-optimization
similar to #6453.
Regarding the other uses of the removed AstVar attributes:
- As of 5.000, initial edges are triggered via a separate mechanism
applied in V3Sched, so the use in V3EmitCFunc.cpp is redundant
- Also as of 5.000, we can handle arbitrary sensitivity expressions, so
the restriction on eliminating clock signals in V3Gate is unnecessary
- Since the recent change when Dfg is applied after V3Scope, it does
perform the equivalent of GateClkDecomp, so we can delete that pass.
Apart from the representational changes below, this patch renames
AstNodeMath to AstNodeExpr, and AstCMath to AstCExpr.
Now every expression (i.e.: those AstNodes that represent a [possibly
void] value, with value being interpreted in a very general sense) has
AstNodeExpr as a super class. This necessitates the introduction of an
AstStmtExpr, which represents an expression in statement position, e.g :
'foo();' would be represented as AstStmtExpr(AstCCall(foo)). In exchange
we can get rid of isStatement() in AstNodeStmt, which now really always
represent a statement
Peak memory consumption and verilation speed are not measurably changed.
Partial step towards #3420
- Rename `--dump-treei` option to `--dumpi-tree`, which itself is now a
special case of `--dumpi-<tag>` where tag can be a magic word, or a
filename
- Control dumping via static `dump*()` functions, analogous to `debug()`
- Make dumping independent of the value of `debug()` (so dumping always
works even without the debug flag)
- Add separate `--dumpi-graph` for dumping V3Graphs, which is again a
special case of `--dumpi-<tag>`
- Alias `--dump-<tag>` to `--dumpi-<tag> 3` as before
This is a major re-design of the way code is scheduled in Verilator,
with the goal of properly supporting the Active and NBA regions of the
SystemVerilog scheduling model, as defined in IEEE 1800-2017 chapter 4.
With this change, all internally generated clocks should simulate
correctly, and there should be no more need for the `clock_enable` and
`clocker` attributes for correctness in the absence of Verilator
generated library models (`--lib-create`).
Details of the new scheduling model and algorithm are provided in
docs/internals.rst.
Implements #3278
* EmitXml: Added <ccall>, <constpool>, <initarray>/<inititem>, wrapped children of <if> and <while> with <begin> elements to prevent ambiguity
* EmitXml: added signed="true" to signed basicdtypes
This patch implements #3032. Verilator creates a module representing the
SystemVerilog $root scope (V3LinkLevel::wrapTop). Until now, this was
called the "TOP" module, which also acted as the user instantiated model
class. Syms used to hold a pointer to this root module, but hold
instances of any submodule. This patch renames this root scope module
from "TOP" to "$root", and introduces a separate model class which is
now an interface class. As the root module is no longer the user
interface class, it can now be made an instance of Syms, just like any
other submodule. This allows absolute references into the root module to
avoid an additional pointer indirection resulting in a potential speedup
(about 1.5% on OpenTitan). The model class now also contains all non
design specific generated code (e.g.: eval loops, trace config, etc),
which additionally simplifies Verilator internals.
Please see the updated documentation for the model interface changes.
What previously used to be per module static constants created in
V3Table and V3Prelim are now merged globally within the whole model and
emitted as part of a separate constant pool. Members of the constant
pool are global variables which are declared lazily when used (similar to
loose methods).
Wilson Snyder
Geza Lore
github action
Mariusz Glebocki
Risto Pejašinović
Steven Hugg
Julien Margetts