7424ea2af9
part: update altera/intel idcode (same idcode for III/IV/10 LP)
2023-08-05 06:47:51 +02:00
baff0cad1e
src/part: Fix Xilinx XC2 ident.
2023-08-03 16:12:51 +02:00
502f38fb00
src/part.hpp: Add Kintex Ultrascale+ KU3P ID-Code.
2023-08-03 16:07:55 +02:00
4042646434
src/part.hpp: Add separator for each vendor.
2023-08-03 16:07:43 +02:00
c3e0707f6b
src/part.hpp: Reorder families (older first, smaller first) and minor alignment cleanups.
2023-08-03 16:07:33 +02:00
a1dea79230
src/part.hpp: Add separator for each chip family.
2023-08-03 16:07:24 +02:00
4c5f6f361b
svf_jtag: fix -Wmismatched-new-delete delete -> delete[]
2023-08-03 07:53:59 +02:00
6ef87c5466
ftdipp_mpsse: fix format-zero-length snprintf -> memset
2023-08-03 07:43:56 +02:00
0e1e07262c
ftdispi: add missing status_pin
2023-08-03 07:42:06 +02:00
2f8056cba5
usbBlaster: cleanup
2023-07-30 08:54:13 +02:00
75d98d12e9
jtag: merge init_internal to CTOR, pass verbose to jtag drivers
2023-07-30 08:45:57 +02:00
4bf4b94bbb
cables: verbose type coherency
2023-07-30 08:39:15 +02:00
469e1c3669
efinix: remove verbose comparison
2023-07-30 07:28:29 +02:00
76f84c1190
ftdipp_mpsse: _verbose int8_t -> bool
2023-07-30 07:23:19 +02:00
c41ef7539c
ftdispi: convert verbose bool -> int8_t
2023-07-30 07:19:17 +02:00
baeb9d52ec
Merge pull request #358 from inkdot7/decimal_busdev
...
Parse USB bus:dev as decimal integers, to be consistent with `--scan-usb`.
2023-07-29 18:10:48 +02:00
bed17f3be8
Parse USB bus:dev as decimal integers, to be consistent with --scan-usb.
...
Do not accept auto-detected base 0 (e.g. prefix '0x' for hex), since '0'
prefix gives an octal interpretation, and the user is likely to copy
values from `--scan-usb` or `lsusb` that could then be misinterpreted,
e.g. 005:010.
2023-07-29 09:49:52 +02:00
4f7a4c33aa
Tell USB bus and address when ftdi open fails, when bus and addr both non-zero.
2023-07-29 08:52:16 +02:00
3955a70843
jtag: fix warning (uninitialized tms)
2023-07-27 07:39:20 +02:00
ab9eff7412
jlink: fix warning (uninitialized length)
2023-07-27 07:35:14 +02:00
1dba0572ff
lattice: fix warning (uninitialized rx_buf)
2023-07-27 07:18:59 +02:00
a1e9d3f7db
main: (SPI mode) sanity check: print error and quit when manufacturer is unknown
2023-07-27 07:15:49 +02:00
a89fc54f29
cable: ch347: fix for CI (libusb_strerror with a cast in -> libusb_error, fix libusb callback signature)
2023-07-26 08:37:39 +02:00
0fc8ba10a8
Add WCH CH347T(mode #3 ) JTAG cable
...
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
2023-07-26 08:17:57 +02:00
8ffa024a95
spiFlash: temporary disable read extended ( #345 )
2023-07-24 14:45:13 +02:00
91f2900f0c
add support for colorlight-i9+ board + spiOverJtag/spiOverJtag_xc7a50tfgg484.bit.gz
2023-06-30 11:36:32 +02:00
3e25a33346
boards: added support for 14bits 125MHz redpitaya board (7010)
2023-06-29 16:59:42 +02:00
1f5d6cb373
xilinx: rework error message for zynqXX in SPI_MODE
2023-06-01 20:33:27 +02:00
87b17ed9bf
efinix: support using JTAG interfaces
2023-06-01 11:05:26 +10:00
ec82dd6467
jlink: support J-Link BASE and J-Trace PRO
2023-05-29 11:57:47 +10:00
23d65823aa
jlink: report skipped devices with verbose
2023-05-29 11:57:47 +10:00
bddfe97997
jlink: suport writeTDI() with tx=NULL
...
fixes crash and is consistent with other jtag cables
2023-05-29 11:57:47 +10:00
d2f7040527
main: parse_opt: busdev-num: explicitly set hex base
2023-05-28 17:14:48 +02:00
9331bf7a6b
add sipeed tang nano 20k
2023-05-25 19:24:48 +08:00
5e98333a8d
Fix off-by-one errors in calculating UFM start page.
2023-05-05 02:00:35 -04:00
d8bc361e7f
lattice: UFM printf -> printInfo
2023-05-01 21:11:22 +02:00
caafc8edc3
lattice: bypass refresh instruction for machXO2
2023-05-01 21:07:32 +02:00
a0fdccc2a4
lattice: fix cast int vs uint8_t
2023-05-01 01:05:36 +02:00
0db174ed7e
Add support for flashing UFM on MachXO2 using JEDEC file. ( #339 )
...
* Add support for flashing UFM on MachXO2 using JEDEC file.
* Use a better guard value for getUFMStartPageFromJEDEC.
* Fix if-else style in getUFMStartPageFromJEDEC.
2023-05-01 00:50:16 +02:00
873de96a3b
spiOverJtag: added efinix Titanium Ti60 support
2023-04-27 16:41:58 +02:00
07a0708eb8
efinix:
...
- jtag mode: added spiOverJtag support;
- spiOverJtag: added efinix support: verilog file and t8f81 bitstream
- xyloni: part code for spiOverJtag flash access/load bridge
2023-04-27 16:41:17 +02:00
933ed793e8
Add libgpiod v2 api support
...
Signed-off-by: Balint Cristian <cristian.balint@gmail.com>
2023-04-19 23:27:09 +03:00
cd8a143164
DATA_DIR override with environment variable ( #333 )
2023-04-17 20:55:10 +02:00
4100675a6b
Allow VID:PID override for JLink probe
2023-04-17 19:15:04 +03:00
0a9e8a7e4b
src/xx: cppcheck
2023-04-15 08:20:05 +02:00
cf04d64377
feat: option to use an extra GPIO as the status indicator
2023-04-11 00:36:16 +08:00
9aa0e72afb
Add Support for Xilinx Artix-7 a25t (xc7a25t)
2023-04-07 17:33:16 +12:00
a43f94fcf5
spiFlashdb: Windbond w25q80bv
2023-04-03 23:26:03 +02:00
ccdcc49cb0
gowin: fix typo
2023-03-17 19:42:23 +01:00
6161e550c1
main: deduplicate messages about board's default cable/user's selection, display warn always instead of when verbose mode is set.
2023-03-09 21:19:35 +01:00
4161c79920
Add Support for Xilinx KCU116 ( #322 )
...
* initial kcu116 support
* add kintex ultrascale plus family to xilinx.cpp
* add docs
* combine xcku and xcvu check
* rebuild bitstream for -1 speedgrade
2023-03-09 20:48:19 +01:00
d5f5593421
cmake,usbBlaster: add option to fix firmware path at build time
2023-03-05 23:20:16 +01:00
8c7b110766
spiFlashdb: Macronix MX25L12833
2023-03-05 16:02:22 +01:00
0675cadfe7
spiFlashdb: ST M25P16
2023-03-05 13:14:01 +01:00
4a6e6f0d35
lattice: when loadConfiguration fails -> check if external flash is blank
2023-03-05 10:16:08 +01:00
3babd5d07d
spiInterface: add read method
2023-03-05 10:13:08 +01:00
a5489e62f8
spiFlash: ST M25P16
2023-03-04 18:14:37 +01:00
cda14f24e3
board: hseda-xc6slx16
2023-03-04 17:55:02 +01:00
c35f21a5be
latticeBitParser: add SPI_MODE missing instruction (issue #324 )
2023-03-04 08:02:24 +01:00
3d9717f7c3
add the skip_load_bridge and skip_reset arguments also for Xilinx devices
2023-03-03 11:18:08 +01:00
9c1876818f
README,main: add remote bitbang for ip and port
2023-03-02 13:55:40 +01:00
500c33e037
Merge pull request #318 from trabucayre/remoteBitbang
...
remoteBitbang_client: adding new protocol (client side)
2023-03-02 13:50:12 +01:00
fd97c244d9
remoteBitbang_client: adding new protocol (client side)
2023-03-02 13:47:11 +01:00
7de494f666
adding Opal Kelly XEM8320 board
2023-02-28 22:40:41 +01:00
fe0f0ac0c0
Artix+ AU25P support for Opal Kelly Board
2023-02-28 14:24:49 -07:00
657d98f3c3
args: better --offset description ( #319 )
2023-02-27 21:15:34 +01:00
567d854edf
efinix: fix JTAG: detect family, fix irlen for titanium, add support for bit file, hex file can't be used with titanium
2023-02-26 10:10:46 +01:00
6799115451
parts: fix Efinix titanium irlen
2023-02-26 10:02:26 +01:00
64d6b614b6
efinix: in jtag mode fix access to the ll driver
2023-02-25 18:36:04 +01:00
d7d414ea55
jtag: adding getter to lowlevel transport driver
2023-02-25 17:15:25 +01:00
daf233d983
efinix: in JTAG mode keep bus_addr, device_addr between jtag and spi interfaces
2023-02-25 17:11:55 +01:00
ea6b1989d0
ftdipp_mpsse: adding bus_addr, device_addr getters
2023-02-25 17:10:40 +01:00
7f1f9445d4
cable: bus_addr, device_addr: int -> uint8_t
2023-02-25 17:10:01 +01:00
49ae479833
Add flash support for VCU128
...
VCU128 does not have secondary flash.
2023-02-22 09:51:16 +08:00
f54781471b
Add initial support for VCU128
2023-02-19 18:39:14 +08:00
a0180f0bc6
xvc_server: fix comm when Vivado acts as client
2023-02-18 09:31:25 +01:00
a481c1e699
gowin: merge CRC check into one method, check usercode/checksum as fallback when usercode register doesn't match computed file's checksum (issue #279 )
2023-02-16 20:02:36 +01:00
6f070d8e97
fsParser: fix usercode/checksum size
2023-02-16 19:59:58 +01:00
2869db7580
libusb_ll: fix typo in scan method
2023-02-16 08:00:39 +01:00
391dcb3dee
dirtyJtag: throw exception when getVersion fails, use a #define for TIMEOUT value
2023-02-16 07:59:54 +01:00
8e20f1eb7d
Fix typo in part name and family.
2023-02-15 15:06:02 +01:00
9a09e427e3
Added Lone Dynamics Schoko and Konfekt SBCs
2023-02-11 17:15:45 +01:00
2c7334cc35
src/part: add LCMXO2-256HC, update doc/FPGAs
2023-02-08 20:18:04 +01:00
b93862bd65
Sort.
2023-02-08 14:08:45 +01:00
d4095ddb93
Add ID code for part xa2c64a (Coolrunner-II).
2023-02-08 14:05:45 +01:00
090a16656d
Only delete bitstream objects if non-null
2023-02-07 10:30:28 +01:00
beb93d8321
Replace the string arguments usage with a bitfield
2023-02-06 15:17:53 +01:00
0536ab4754
Add target-flash and secondary-bitstream CLI options for VCU118
2023-02-06 11:23:10 +01:00
5a00f0d184
part: Add all cyclone V variant
...
board: Add the Terasic C5G
2023-01-29 15:35:47 +01:00
4a07ffa2b8
Merge pull request #297 from barbedo/vcu118-flash-ir-codes
...
Add support for XCVU9P IR length and codes
2023-01-24 06:31:40 +01:00
43e6c0c867
Add support for 4-byte QSPI flash addressing ( #295 )
...
* Add support for 4-byte QSPI flash addressing
* Avoid code duplication
2023-01-23 15:18:46 +01:00
ad9ad539ff
Add support for XCVU9P IR length and codes
2023-01-21 14:45:50 +01:00
e5481787d8
Fix VCU118 board part name and IR length
2023-01-21 14:45:50 +01:00
85fd2f316f
Add support for MT25QU01 flash
2023-01-21 13:47:51 +01:00
d127fb9554
bitparser: replace _raw_data.size() with _file_size
...
Signed-off-by: Michal Sieron <msieron@antmicro.com>
2023-01-20 09:09:41 +01:00
bc53c1d022
bitparser: check bitstream length in the file
...
It was present before, but for some reason was removed in 16932786
2023-01-19 21:07:40 +01:00
67563983f9
feat(board): add support for Terasic DE10-Lite
2023-01-09 15:52:54 -06:00
fdf4c94d83
boards: add Sitlinv STLV7325
...
Sitlinv STLV7325 is a board with XC7K325T-FFG676.
Add support for it.
The board does not have JTAG cables on board, however its vendor
provides an option to buy a FT4232-based JTAG cable with the board, so
the default cable is set to ft4232.
Signed-off-by: Icenowy Zheng <uwu@icenowy.me>
2023-01-06 15:22:43 +08:00
14fce33109
feat(board): add support for Arrow/Terasic DECA
2023-01-04 13:11:21 -06:00
cc1bc89f29
boards: Trenz TEI0010 - AnalogMax
2023-01-04 19:00:08 +01:00
Gwenhael Goavec-Merou
Florent Kermarrec
Haakan T Johansson
Alexey Starikovskiy
Stéphane Chevigny
Andrew Dennison
wonderfullook
William D. Jones
Balint Cristian
Viktor P
chenzhuoyu
nulltek
Maik Ender
hycrypt
AEW2015
Jiajie Chen
Bastian Löher
wdevore
Ricardo Barbedo
Olivier Galibert
Ricardo Barbedo
Michal Sieron
Marcus Andrade
Icenowy Zheng