3b932dc542
colognechip: Simplify number of jtag bypass bits
2025-07-09 16:13:18 +02:00
4553bacb05
colognechip: performs reset after SPI Flash write
2025-05-01 16:19:05 +02:00
3cf558ebe2
colognechip: added a workaround to drive reset pin with DirtyJTAG cable
...
(requires a recent DirtyJTAG firmware)
2025-03-07 07:19:39 +01:00
c468a69fc9
all devices / spiInterface / main: added method / infra to detect flash chip with --detect -f
2024-06-09 09:28:52 +02:00
7dc3ff7803
gatemate: fix jtag-spi-bypass with dirtyJtag
2024-03-15 00:13:12 +01:00
e52d647d7b
gatemate: fix passive spi segfaults and improve verbosity
2024-03-15 00:11:11 +01:00
5bb8ce83b3
gatemate: fix CFG_MD typos
2024-03-15 00:07:05 +01:00
2e5c35edde
gatemate: remove flash reset, power_up and read_id duplicates
2024-03-14 23:31:34 +01:00
1304f67f1b
gatemate: fix unintended gpio access with dirtyJtag cables
2024-03-14 18:02:50 +01:00
001f20c884
gatemate: use more suitable change to RUN_TEST_IDLE state
2023-12-27 13:38:13 +01:00
1dfdec6ce1
gatemate: fix configuration in jtag chains
2023-12-12 10:21:30 +01:00
18056180a8
gatemate: do not call ftdi-related routines when using alternative cables
2023-10-04 15:41:10 +02:00
9e91c31e31
Fixes for PVS errors
2023-09-01 22:30:24 +03:00
1908ccd83b
make output buffer const
2023-08-29 19:51:41 +03:00
0bdef7bab1
typo's, added git as dependency
2022-12-18 13:56:54 +01:00
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
3f5aca5248
colognechip: explicitly set _spi or _ftdi_jtag to null, drop useless else if -> if not _spi it must be jtag
2022-03-20 08:44:55 +01:00
648de05e6d
colognechip: fix dumpFlash: add override, remove filename param and use _filename from constructor
2022-03-20 08:25:51 +01:00
39ed7ec7f1
colognechip: suppress warnings
2021-12-24 10:29:21 +01:00
45f7f72030
all devices: add support to (un)protect flash, implement pre/post flash access. Use new spiInterface methods
2021-12-22 19:11:35 +01:00
1e1b93c27a
colognechip integration: introduce waitCfgDone() and check for raw data
2021-12-12 15:34:25 +01:00
e252e713dd
colognechip integration: apply review remarks
...
* add missing #include <string>
* add comment to part.hpp why highest nibble should be kept
* remove _reverseOrder variable from colognechipCfgParser.{hpp,cpp}
* rename cfgDone() to to a more meaningfull waitCfgDone()
2021-12-12 11:55:10 +01:00
dd0d668d96
colognechip integration: update code style
2021-12-11 16:36:29 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
Patrick Urban
Gwenhael Goavec-Merou
Patrick Urban
Alexey Starikovskiy
Cedric de Wijs