fefea9fe8e
board: generic FTDI SPI
2021-12-22 19:12:02 +01:00
56a1e0310d
board: add arty S7 50
2021-12-21 18:21:39 +01:00
03c7d7faad
arty A7 100t support
2021-12-21 07:02:48 +01:00
f3e9a9fa6d
digilent_arty_z7 10/20 support
2021-12-20 18:10:17 +01:00
e026aa28c7
Digilent arty s7 25
2021-12-19 17:35:23 +01:00
18349fb6e8
efinix: add support for Titanium Ti60 f225 dev kit
2021-12-13 22:13:29 +01:00
d09e5da0ba
colognechip integration: initial commit
...
This commit adds support for the Cologne Chip GateMate FPGA series. Both
Evaluation Board and Programmer Cable are supported. Configurations can be
loaded into the FPGA with both devices via JTAG or SPI. In addition to
reading/writing data from/to flashes directly via SPI, this can also be done
via the built-in JTAG-SPI-bypass. A direct wiring between programming hardware
and flash is no longer necessary in this case.
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2021-12-10 12:12:32 +01:00
7ceaab0126
spiOverJtag: add bitstream for ECP4CE15F23
2021-11-28 16:51:42 +01:00
7ed432cba2
board: add QMTECH Cyclone IV Core Board
2021-11-14 08:45:11 +01:00
f843dc2eb2
ch552_jtag: driver for ch552_jtag firmware (ft2232c clone)
2021-11-06 10:33:25 +01:00
649554f3fd
efinix: add jtag support, introduce oe_pin in board configuration, add xyloni jtag interface
2021-10-23 08:44:23 +02:00
7d8c8b2dcb
Add Trion T120 BGA 576 Dev Kit support.
...
This Dev Kit uses a FT2232 chip, so also rename efinix_spi with efinix_spi_ft4232
and introduce efinix_spi_ft2232.
2021-10-15 09:20:36 +02:00
e6c01f75ad
board: fix altsetting default for non-DFU boards, use signed type
2021-10-03 18:31:55 +02:00
a38d0b2d36
board: force 0 for altsetting in non-DFU type
2021-10-03 15:23:21 +02:00
144e376d36
board: add support for 1bitsquared iCEBreaker-bitsy
2021-10-03 12:42:35 +02:00
ea613fa97a
dfu/main: add args to select altsetting and add filter to select corresponding interface
2021-10-03 12:39:06 +02:00
11bdebd884
adding reference to Tang Nano 4K kit in doc
2021-09-02 13:54:34 +02:00
b8e2939776
board: add vid/pid for DFU at board level
2021-07-17 08:34:44 +02:00
894cda820f
board: add default frequency option for BITBANG and SPI boards
2021-07-14 08:05:36 +02:00
797785ce93
Allow board configuration table to contain a default clock speed (as some boards are known to work at higher speeds safely). Move Digilent Arty to 10MHz (tested).
2021-07-11 15:20:15 +01:00
6639f0646a
board: pipistrello: add spi flash support
2021-07-11 08:58:40 +02:00
c90a4b7734
altera: spi flash support for cycloneV and qmtech
2021-07-10 08:20:27 +02:00
0c4aedcb23
altera: add spi flash support for de0nano (EP4CE22F17C6)
2021-07-09 07:40:55 +02:00
84bd19b19a
board: cyc1000: add fpga model
2021-07-08 20:53:20 +02:00
8068c84ec8
board: add Fomu support
2021-06-29 13:49:33 +02:00
8f95303daf
move to APACHE-2.0 license
2021-06-26 15:24:07 +02:00
827767b99f
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
2021-06-20 10:26:05 +02:00
dddfcbc973
board: add support for colorlight I5
2021-06-19 17:30:47 +02:00
00289503dd
README: add ZedBoard, de0nanoSoc and de10nano support
2021-06-19 15:33:26 +02:00
eaed746cf2
Add a few more Spartan6 based parts and boards (tested on an old miniSpartan6+).
2021-06-13 17:55:56 +01:00
a160cc6431
board: add terasic de0nanoSoc
2021-05-15 19:32:49 +02:00
a96fbcc99a
board: add digilent zedboard
2021-05-15 19:31:39 +02:00
a4ccdae7df
add basys3 support
2021-04-20 21:28:14 +02:00
7039465353
rework xilinx fpga spiOverJtag to respect model/package
2021-04-19 21:17:08 +02:00
858d9e6273
add support for Alchitry Au
2021-04-16 21:20:30 +02:00
16f85fff63
add support for kintex xc7k325t
2021-03-24 17:25:05 +01:00
630a976884
add support for cycloneIII and Terasic DE0 board
2021-03-20 12:23:17 +01:00
dbc78f8c57
add seeedstudio runber (gowin GW1N-4)
2021-01-28 06:19:43 +01:00
60800ee1a6
board: add entry for tec0117
2021-01-25 18:52:54 +01:00
cd625d4c99
add efinix Xyloni support (spi mode only)
2021-01-21 07:11:10 +01:00
1b065277f9
add acorn CLE 215+ support
2020-12-17 09:28:45 +01:00
6e44797677
add fairwaves xtrx pro board
2020-12-15 09:47:10 +01:00
a11ec92a25
Fix gcc 10.2 error messages.
2020-12-12 15:48:45 -08:00
14c5b8e681
add support for ice40 FPGA and iCEBreaker, icestick, iCE40-HX8K, iCE40-HX1K-EVN boards
2020-10-31 15:02:54 +01:00
7e15b5cabb
board: Fireant support
2020-10-31 10:44:44 +01:00
6aa2176be1
board: typo
2020-10-31 10:44:14 +01:00
537f02fa89
board: fix control pins size
2020-10-31 10:43:45 +01:00
3c9870bba3
introduce CBUS/DBUS pins value, add macro and pin mapping for board in SPI mode, reset and done signals
2020-10-31 08:40:18 +01:00
fe8cd9998d
board: simplify board definition using preprocessor macro
2020-10-31 08:04:43 +01:00
e347d2afd6
board: add spi_pins_conf structure
2020-10-30 08:23:49 +01:00
Gwenhael Goavec-Merou
Franck Jullien
Patrick Urban
Florent Kermarrec
Fabien Marteau
ultraembedded
Giuseppe Gebbia
phdussud