1f842e4ebc
cable: add missing mpsse_bit_config index
2022-06-02 08:51:47 +02:00
dec1a0920f
add means to set cable index from command line
2022-06-01 07:17:38 -07:00
610a495898
main: skip-reset fix typo
2022-05-28 18:06:51 +02:00
26ea58c305
main: always check if board is not null before access
2022-05-28 17:20:53 +02:00
051e2ecbfb
add option to bypass reset in SPI write mode. Adapt altera accordingly
2022-05-24 07:29:35 +02:00
e066c7f5b0
Merge pull request #222 from el-coder-sb/add-skip-sram-cmd
...
Add skip sram cmd
2022-05-24 07:16:24 +02:00
847a5040cf
add skip_load_bridge cmd-line parameter
2022-05-23 11:51:16 +02:00
056518e7c7
ihexParser: check buffer size, increase if required
2022-05-22 07:34:09 +02:00
e1eff76162
Merge pull request #228 from MPLew-is/zcu106
...
Correct part number for ZCU106 board
2022-05-16 08:52:28 +02:00
5295544200
Correct part number for ZCU106 board
2022-05-16 00:44:59 -06:00
c9fb3f4065
latticeBitParser: fix end header position with MACHOX3D .bit file
2022-05-14 19:00:21 +02:00
a4d5fd8448
lattice: MACHXO3D no exception when flash-sector is not provided in SRAM mode
2022-05-14 18:54:01 +02:00
ee3b6965f0
fix(part.hpp): use uint32_t instead of int for fpga_list index
...
This resulted in an error with GCC 12:
In file included from src/main.cpp:29:
src/part.hpp:148:1: error: narrowing conversion of ‘2165379139’ from ‘unsigned int’ to ‘int’ [-Wnarrowing]
148 | };
| ^
2022-05-14 15:36:02 +02:00
76f13604d1
Add initial support for ZCU106 development board
2022-05-14 02:48:23 -06:00
f83670996e
spiFlashdb: adding S25FL512S
2022-05-14 10:16:08 +02:00
74eda1cd8a
spiFlashdb: N25Q64 part
2022-05-10 19:07:56 +02:00
6a2a62cae6
support Kintex XC7K420T
2022-05-10 13:07:47 +07:00
2bbf372a1d
Merge pull request #218 from ejdan/efinix-jtag
...
efinix: support loading a bitstream to SRAM using only JTAG pins (no GPIO)
2022-05-02 07:05:37 +02:00
84d5c59dfe
ftdipp_mpsse: don't throw exception when iProduct is empty: display warn and use empty string
2022-05-01 17:09:53 +02:00
db410839af
spiInterface: unprotect_flash: fix return. Improve messages
2022-04-30 20:16:30 +02:00
e094494a59
efinix: support loading a bitstream to memory using only JTAG pins (no GPIO). Tested with Trion T120 BGA324 Development Kit but should work on T20BGA324, T20BGA400, T35, T55, T85, and T120 FPGA.
2022-04-29 15:57:20 +02:00
d7365495aa
spiFlash: fix display: when bp_len==0 -> set bp/tb = 0, otherwise parse reg
2022-04-23 17:58:33 +02:00
5692482152
jlink: write_data -> writeTMSTDI. Fix behaviour
2022-04-17 12:33:37 +02:00
b12d174131
part: add 5CEBA9 entry (issue #213 )
2022-04-11 19:14:58 +02:00
80eeaef6ab
ip CLI arg for XVC
2022-04-11 06:53:22 +02:00
188d7518d1
jlink: check usb_claim error
2022-04-11 06:51:34 +02:00
7bfce0fb2b
xvc_client: Xilinx Virtual Cable client PoC
2022-04-10 16:02:39 +02:00
dce9406599
gatemate: fix failed signal polarity and update documentation
...
* CFG_FAILED signal is no longer inverted
* minor fix in CFG_MD settings in doc/vendors/colognechip.rst
* update evaluation board URL
Signed-off-by: Patrick Urban <patrick.urban@web.de>
2022-04-09 13:08:57 +02:00
08c460135e
xilinx: fix wait until done for spartan3e
2022-04-02 11:53:46 +02:00
285cbde7f4
part: explictly add spartan3e and xc3s250e
2022-04-02 11:52:58 +02:00
7a8ed993f3
spiFlash: bulk_erase: check bp before erase
2022-03-31 06:36:37 +02:00
f615627b3c
Merge pull request #204 from rstephan/p_one_flash
...
Support for the Microchip SST25VF040B flash
2022-03-30 06:45:53 +02:00
648d8b9e3b
Removed `must_relock` part for the "SST25VF040B" as requested
2022-03-29 18:30:23 +02:00
7a5284212b
part: Add support for Kintex Ultrascale XCKU040
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:52 +02:00
6578bed6aa
part: Add support for ZynqMP Ultrascale Plus XCZU11EG
...
Signed-off-by: Sylvain Munaut <tnt@asuka.home.246tnt.com>
2022-03-29 10:40:38 +02:00
f9eb32c778
spiFlash: handle case where TB is not configurable
2022-03-29 07:49:08 +02:00
b8fd59e770
ftdipp_mpsse: don't display error when attach kernel driver, when the device hasn't been detach before or when driver isn't loaded.
2022-03-28 18:53:36 +02:00
27f0ff2816
Merge pull request #205 from rstephan/spartan3e
...
Spartan3E (xc3s500evq100) and Papilio One
2022-03-28 18:37:43 +02:00
6da87c3d24
xc3s500e IDCODE: revision set to zero.
2022-03-28 18:14:25 +02:00
8337a926fb
Removed TOP/BOTTOM settings from SST25VF040B
2022-03-28 17:54:43 +02:00
8b6b09ea25
part: Add kintex7 variant xc7k410t
2022-03-28 10:43:11 -05:00
9243a21fe2
xilinx: adapts flow_disable/flow_enable for xc3s, adding custom method to load bitstream for xc3s
2022-03-27 18:11:31 +02:00
386f89ea3a
latticeBitParser: when .bit is encrypted use Part: from header to retrieve idcode
2022-03-27 07:51:18 +02:00
da3dfff609
part: re-adding version nibble to remove ambiguities between U, UM and UM5G
2022-03-27 07:47:38 +02:00
10ee84bb6d
jtag: when verbose > 1: display unfiltered/raw IDCODE
2022-03-27 07:14:14 +02:00
65c1d2ff0e
ftdipp_mpsse: change verbose level
2022-03-27 07:13:40 +02:00
b60f37b56d
Support for the Papilio One board
2022-03-25 21:44:05 +01:00
8c4b1b3afd
Support for the Microchip SST25VF040B flash.
...
Programming is slow, only one byte at a time :-(
2022-03-25 21:15:09 +01:00
7d730eeeb6
ftdiJtagxx: check lowlevel init return value
2022-03-20 16:27:51 +01:00
5d22374408
ftdipp_mpsse: robustness: check all function return code / improve a bit error message
2022-03-20 16:20:57 +01:00
Gwenhael Goavec-Merou
Rengifo, Rodrigo
Simon Buhrow
Mike Lewis
Xiretza
Hans Baier
Anders Ejdeling
Patrick Urban
Stephan Ruloff
Sylvain Munaut
Steven Koo