Gwenhael Goavec-Merou
|
13af012163
|
main: avoid potential miss with probe clock frequency
|
2021-07-14 08:04:43 +02:00 |
Gwenhael Goavec-Merou
|
fd329158de
|
Merge pull request #98 from ultraembedded/master
Add board specific default frequency
|
2021-07-14 07:53:13 +02:00 |
Gwenhael Goavec-Merou
|
acf7d2a0a8
|
ftdiJtagMPSSE: add work around to deal with freq >= 15MHz
|
2021-07-13 07:00:30 +02:00 |
Gwenhael Goavec-Merou
|
594f065116
|
ftdipp_mpsse: use runtime_error instead of simple exception
|
2021-07-12 08:05:25 +02:00 |
ultraembedded
|
f8831f329c
|
Only use board clock speed if user does not specify an alternate freq
|
2021-07-11 15:27:46 +01:00 |
ultraembedded
|
797785ce93
|
Allow board configuration table to contain a default clock speed (as some boards are known to work at higher speeds safely). Move Digilent Arty to 10MHz (tested).
|
2021-07-11 15:20:15 +01:00 |
Gwenhael Goavec-Merou
|
3983726a66
|
all devices: use spiFlash dump & verify
|
2021-07-11 11:34:14 +02:00 |
Gwenhael Goavec-Merou
|
f5254294eb
|
altera: add verify and dump
|
2021-07-11 11:32:35 +02:00 |
Gwenhael Goavec-Merou
|
b77c5a22df
|
spiFlash: add verify and dump method
|
2021-07-11 11:32:10 +02:00 |
Gwenhael Goavec-Merou
|
f19d0996a4
|
progressBar: limit resolution
|
2021-07-11 11:30:02 +02:00 |
Gwenhael Goavec-Merou
|
6639f0646a
|
board: pipistrello: add spi flash support
|
2021-07-11 08:58:40 +02:00 |
Gwenhael Goavec-Merou
|
c90a4b7734
|
altera: spi flash support for cycloneV and qmtech
|
2021-07-10 08:20:27 +02:00 |
Gwenhael Goavec-Merou
|
0c4aedcb23
|
altera: add spi flash support for de0nano (EP4CE22F17C6)
|
2021-07-09 07:40:55 +02:00 |
Gwenhael Goavec-Merou
|
c99f5aa4e6
|
main: update to pass device type and prog type to altera class
|
2021-07-08 20:54:12 +02:00 |
Gwenhael Goavec-Merou
|
84bd19b19a
|
board: cyc1000: add fpga model
|
2021-07-08 20:53:20 +02:00 |
Gwenhael Goavec-Merou
|
c29fbb15f9
|
altera: use new epcq interface, add device type and prog type. Now more generic and not specific to cyc1000
|
2021-07-08 20:52:46 +02:00 |
Gwenhael Goavec-Merou
|
0d4b6143b5
|
epcq,spiFlash: epcq is now a subclass of spiFlash (real different part is power_(up|down) and read_id
|
2021-07-08 20:51:51 +02:00 |
Billy Stevens
|
f937cb9ab5
|
Adds support for the xc6slx100fgg484.
Tested on a Pano Logic G2.
|
2021-07-03 05:01:56 -04:00 |
Gwenhael Goavec-Merou
|
8068c84ec8
|
board: add Fomu support
|
2021-06-29 13:49:33 +02:00 |
Gwenhael Goavec-Merou
|
8f95303daf
|
move to APACHE-2.0 license
|
2021-06-26 15:24:07 +02:00 |
Gwenhael Goavec-Merou
|
b2d2fa0127
|
ftdipp_mpsse: with 1.5 reatach may be automatic
|
2021-06-26 15:04:57 +02:00 |
Gwenhael Goavec-Merou
|
c1f18cd1d3
|
jtag: fix unsigned vs signed
|
2021-06-26 08:47:37 +02:00 |
Gwenhael Goavec-Merou
|
98a2e836fa
|
ice40: add support for verify and dump
|
2021-06-26 08:43:02 +02:00 |
Gwenhael Goavec-Merou
|
fb8f50cb52
|
ice40: indent
|
2021-06-26 08:34:41 +02:00 |
Gwenhael Goavec-Merou
|
79a0e84f1f
|
efinix: add support for verify and dump
|
2021-06-26 08:34:12 +02:00 |
Gwenhael Goavec-Merou
|
b92a9adca7
|
ftdispi: improve write/read
|
2021-06-26 08:06:26 +02:00 |
Gwenhael Goavec-Merou
|
d32b81037a
|
xilinx: add dumpFlash support
|
2021-06-25 11:28:19 +02:00 |
Gwenhael Goavec-Merou
|
2af64e9af4
|
all: propagate verify with a message when not supported
|
2021-06-25 08:58:45 +02:00 |
Gwenhael Goavec-Merou
|
fe0a315456
|
lattice,device: introduce method to dump flash content
|
2021-06-24 18:20:34 +02:00 |
Gwenhael Goavec-Merou
|
c471d25bb5
|
xilinx,lattice,device: add verify write into flash
|
2021-06-24 18:08:02 +02:00 |
Gwenhael Goavec-Merou
|
b150bbdd23
|
gowin: checks if fs is targeted for connected device
|
2021-06-24 08:57:18 +02:00 |
Vegard Storheil Eriksen
|
5e11b3cb67
|
cmsisDAP: Remove product string check.
|
2021-06-22 23:59:57 +02:00 |
Vegard Storheil Eriksen
|
7fc0703167
|
cable: Add support for Orbtrace.
|
2021-06-22 23:59:46 +02:00 |
Gwenhael Goavec-Merou
|
40d9bc3ea7
|
dirtyJtag: cpplint/cppcheck
|
2021-06-20 16:39:19 +02:00 |
Gwenhael Goavec-Merou
|
0a7fd93a08
|
dirtyJtag: update _clkHZ with current frequency
|
2021-06-20 16:28:46 +02:00 |
Gwenhael Goavec-Merou
|
8d20c09791
|
dirtyJtag: fix toggleClk call (TMS is high, TDI depends on last_bit)
|
2021-06-20 16:28:18 +02:00 |
Gwenhael Goavec-Merou
|
26f5dd3ee5
|
Merge pull request #92 from phdussud/master
dirtyJtag optimizations to cut the number of USB requests
|
2021-06-20 16:26:53 +02:00 |
Gwenhael Goavec-Merou
|
827767b99f
|
add proof of concept / draft for DFU protocol. Add orangeCrab in DFU mode
|
2021-06-20 10:26:05 +02:00 |
phdussud
|
80f642a0a4
|
Fix a buffer overflow per code review
|
2021-06-19 12:39:25 -07:00 |
phdussud
|
cbbac0bff8
|
Changes per code review.
|
2021-06-19 09:40:33 -07:00 |
Gwenhael Goavec-Merou
|
dddfcbc973
|
board: add support for colorlight I5
|
2021-06-19 17:30:47 +02:00 |
Gwenhael Goavec-Merou
|
53c5d35da6
|
add cmsis dap (hid) support
|
2021-06-19 17:30:23 +02:00 |
Gwenhael Goavec-Merou
|
00289503dd
|
README: add ZedBoard, de0nanoSoc and de10nano support
|
2021-06-19 15:33:26 +02:00 |
Gwenhael Goavec-Merou
|
b4fe045060
|
fsparser: don't try to analyze header after then end of header area
|
2021-06-18 13:33:40 +02:00 |
phdussud
|
f84cb403e4
|
dirtyJtag optimizations to cut the number of USB requests
|
2021-06-13 11:38:30 -07:00 |
ultraembedded
|
eaed746cf2
|
Add a few more Spartan6 based parts and boards (tested on an old miniSpartan6+).
|
2021-06-13 17:55:56 +01:00 |
Gwenhael Goavec-Merou
|
2bf7b255b3
|
lattice: move directly to run_test_idle with last tx packet in program_mem
|
2021-06-12 09:27:16 +02:00 |
Gwenhael Goavec-Merou
|
2214a7e720
|
Merge remote-tracking branch 'origin/master' into JTAG_chain
|
2021-06-12 08:44:18 +02:00 |
Gwenhael Goavec-Merou
|
b5f2506fd1
|
clkHZ: be more generic
|
2021-06-12 08:40:40 +02:00 |
ultraembedded
|
dc003f6212
|
As per feedback, allow 232H devices to have upper bank pins configured on init.
|
2021-06-11 11:24:57 +01:00 |